sys/ucontext.h unconditionally uses stack_t, and it does not make
sense to change that. But signal.h only declares stack_t under
__USE_XOPEN_EXTENDED || __USE_XOPEN2K8. The actual definition is
already in a bits header, bits/sigstack.h, but that header insists on
only being included by signal.h, so we have to change that as well as
all of the sys/ucontext.h variants. (Some but not all variants of
bits/sigcontext.h, which sys/ucontext.h may also need, had already
received this adjustment; for consistency, I made them all the same,
even if that's not strictly necessary in some configurations.)
bits/sigcontext.h and bits/sigstack.h also all need to receive
multiple inclusion guards.
* sysdeps/generic/sys/ucontext.h
* sysdeps/arm/sys/ucontext.h
* sysdeps/i386/sys/ucontext.h
* sysdeps/m68k/sys/ucontext.h
* sysdeps/mips/sys/ucontext.h
* sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h
* sysdeps/unix/sysv/linux/alpha/sys/ucontext.h
* sysdeps/unix/sysv/linux/arm/sys/ucontext.h
* sysdeps/unix/sysv/linux/hppa/sys/ucontext.h
* sysdeps/unix/sysv/linux/ia64/sys/ucontext.h
* sysdeps/unix/sysv/linux/m68k/sys/ucontext.h
* sysdeps/unix/sysv/linux/mips/sys/ucontext.h
* sysdeps/unix/sysv/linux/nios2/sys/ucontext.h
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h
* sysdeps/unix/sysv/linux/s390/sys/ucontext.h
* sysdeps/unix/sysv/linux/sh/sys/ucontext.h
* sysdeps/unix/sysv/linux/sparc/sys/ucontext.h
* sysdeps/unix/sysv/linux/tile/sys/ucontext.h
* sysdeps/unix/sysv/linux/x86/sys/ucontext.h:
Include both bits/sigcontext.h and bits/sigstack.h.
Fix grammar error in comment, if present.
* bits/sigstack.h
* sysdeps/unix/sysv/linux/aarch64/bits/sigstack.h
* sysdeps/unix/sysv/linux/alpha/bits/sigstack.h
* sysdeps/unix/sysv/linux/bits/sigstack.h
* sysdeps/unix/sysv/linux/ia64/bits/sigstack.h
* sysdeps/unix/sysv/linux/mips/bits/sigstack.h
* sysdeps/unix/sysv/linux/powerpc/bits/sigstack.h
* sysdeps/unix/sysv/linux/sparc/bits/sigstack.h
* bits/sigcontext.h
* sysdeps/mach/hurd/i386/bits/sigcontext.h
* sysdeps/unix/sysv/linux/bits/sigcontext.h
* sysdeps/unix/sysv/linux/ia64/bits/sigcontext.h
* sysdeps/unix/sysv/linux/sparc/bits/sigcontext.h:
Add multiple inclusion guard. Permit inclusion by sys/ucontext.h
as well as signal.h, if this was not already allowed. Request
definition of size_t if necessary. Minimize semantically-null
differences across files.
TS 18661-1 defines a type femode_t to represent the set of dynamic
floating-point control modes (such as the rounding mode and trap
enablement modes), and functions fegetmode and fesetmode to manipulate
those modes (without affecting other state such as the raised
exception flags) and a corresponding macro FE_DFL_MODE.
This patch series implements those interfaces for glibc. This first
patch adds the architecture-independent pieces, the x86 and x86_64
implementations, and the <bits/fenv.h> and ABI baseline updates for
all architectures so glibc keeps building and passing the ABI tests on
all architectures. Subsequent patches add the fegetmode and fesetmode
implementations for other architectures.
femode_t is generally an integer type - the same type as fenv_t, or as
the single element of fenv_t where fenv_t is a structure containing a
single integer (or the single relevant element, where it has elements
for both status and control registers) - except where architecture
properties or consistency with the fenv_t implementation indicate
otherwise. FE_DFL_MODE follows FE_DFL_ENV in whether it's a magic
pointer value (-1 cast to const femode_t *), a value that can be
distinguished from valid pointers by its high bits but otherwise
contains a representation of the desired register contents, or a
pointer to a constant variable (the powerpc case; __fe_dfl_mode is
added as an exported constant object, an alias to __fe_dfl_env).
Note that where architectures (that share a register between control
and status bits) gain definitions of new floating-point control or
status bits in future, the implementations of fesetmode for those
architectures may need updating (depending on whether the new bits are
control or status bits and what the implementation does with
previously unknown bits), just like existing implementations of
<fenv.h> functions that take care not to touch reserved bits may need
updating when the set of reserved bits changes. (As any new bits are
outside the scope of ISO C, that's just a quality-of-implementation
issue for supporting them, not a conformance issue.)
As with fenv_t, femode_t should properly include any software DFP
rounding mode (and for both fenv_t and femode_t I'd consider that
fragment of DFP support appropriate for inclusion in glibc even in the
absence of the rest of libdfp; hardware DFP rounding modes should
already be included if the definitions of which bits are status /
control bits are correct).
Tested for x86_64, x86, mips64 (hard float, and soft float to test the
fallback version), arm (hard float) and powerpc (hard float, soft
float and e500). Other architecture versions are untested.
* math/fegetmode.c: New file.
* math/fesetmode.c: Likewise.
* sysdeps/i386/fpu/fegetmode.c: Likewise.
* sysdeps/i386/fpu/fesetmode.c: Likewise.
* sysdeps/x86_64/fpu/fegetmode.c: Likewise.
* sysdeps/x86_64/fpu/fesetmode.c: Likewise.
* math/fenv.h: Update comment on inclusion of <bits/fenv.h>.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fegetmode): New function
declaration.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetmode): Likewise.
* bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New
typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/m68k/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (__fe_dfl_mode): New variable
declaration.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/tile/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* manual/arith.texi (FE_DFL_MODE): Document macro.
(fegetmode): Document function.
(fesetmode): Likewise.
* math/Versions (fegetmode): New libm symbol at version
GLIBC_2.25.
(fesetmode): Likewise.
* math/Makefile (libm-support): Add fegetmode and fesetmode.
(tests): Add test-femode and test-femode-traps.
* math/test-femode-traps.c: New file.
* math/test-femode.c: Likewise.
* sysdeps/powerpc/fpu/fenv_const.c (__fe_dfl_mode): Declare as
alias for __fe_dfl_env.
* sysdeps/powerpc/nofpu/fenv_const.c (__fe_dfl_mode): Likewise.
* sysdeps/powerpc/powerpc32/e500/nofpu/fenv_const.c
(__fe_dfl_mode): Likewise.
* sysdeps/powerpc/Versions (__fe_dfl_mode): New libm symbol at
version GLIBC_2.25.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
TS 18661-1 defines an fetestexceptflag function to test the exception
state saved in an fexcept_t object by fegetexceptflag.
This patch implements this function for glibc. Almost all
architectures save exception state in such a way that it can be
directly ANDed with exception flag bits, so rather than having lots of
fetestexceptflag implementations that all do the same thing, the math/
implementation is made to use this generic logic (which is also OK in
the fallback case where FE_ALL_EXCEPT is zero). The only architecture
that seems to need anything different is s390.
(fegetexceptflag and fesetexceptflag use abbreviated filenames
fgetexcptflg.c and fsetexcptflg.c. Because we are no longer concerned
by 14-character filename limits, fetestexceptflag uses the obvious
filename fetestexceptflag.c.)
The NEWS entry is intended to be expanded along the lines given in
<https://sourceware.org/ml/libc-alpha/2016-08/msg00356.html> when
fegetmode and fesetmode are added.
Tested for x86_64, x86, mips64 and powerpc.
* math/fetestexceptflag.c: New file.
* sysdeps/s390/fpu/fetestexceptflag.c: Likewise. Comment by
Stefan Liebler.
* math/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(fetestexceptflag): New function declaration.
* manual/arith.texi (fetestexceptflag): Document function.
* math/Versions (fetestexceptflag): New libm symbol at version
GLIBC_2.25.
* math/Makefile (libm-support): Add fetestexceptflag.
(tests): Add test-fetestexceptflag.
* math/test-fetestexceptflag.c: New file.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
TS 18661-1 defines an fesetexcept function for setting floating-point
exception flags without the side-effect of causing enabled traps to be
taken.
This patch series implements this function for glibc. The present
patch adds the fallback stub implementation, x86 and x86_64
implementations, documentation, tests and ABI baseline updates. The
remaining patches, some of them untested, add implementations for
other architectures. The implementations generally follow those of
the fesetexceptflag function.
As for fesetexceptflag, the approach taken for architectures where
setting flags causes enabled traps to be taken is to set the flags
(and potentially cause traps) rather than refusing to set the flags
and returning an error. Since ISO C and TS 18661 provide no way to
enable traps, this is formally in accordance with the standards.
The NEWS entry should be considered a placeholder, since this patch
series is intended to be followed by further such series adding other
TS 18661-1 features, so that the NEWS entry would end up looking more
like
* New <fenv.h> features from TS 18661-1:2014 are added to libm: the
fesetexcept, fetestexceptflag, fegetmode and fesetmode functions,
the femode_t type and the FE_DFL_MODE macro.
with hopefully more such entries for other features, rather than
having an entry for a single function in the end.
I believe we have consensus for adding TS 18661-1 interfaces as per
<https://sourceware.org/ml/libc-alpha/2016-06/msg00421.html>.
Tested for x86_64, x86, mips64 (hard float, and soft float to test the
fallback version), arm (hard float) and powerpc (hard float, soft
float and e500).
* math/fesetexcept.c: New file.
* sysdeps/i386/fpu/fesetexcept.c: Likewise.
* sysdeps/x86_64/fpu/fesetexcept.c: Likewise.
* math/fenv.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetexcept): New function
declaration.
* manual/arith.texi (fesetexcept): Document function.
* math/Versions (fesetexcept): New libm symbol at version
GLIBC_2.25.
* math/Makefile (libm-support): Add fesetexcept.
(tests): Add test-fesetexcept and test-fesetexcept-traps.
* math/test-fesetexcept.c: New file.
* math/test-fesetexcept-traps.c: Likewise.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
Presently sys/sysmacros.h is entirely defined in sysdeps. This would
mean that the deprecation logic coming up in the next patch would have
to be written twice (in generic/ and unix/sysv/linux/). To avoid that,
hoist all but the unavoidably system-dependent logic to misc/, leaving a
bits/ header behind. This also promotes the Linux-specific encoding of
dev_t, which accommodates 32-bit major and minor numbers in a 64-bit dev_t,
to generic, as glibc's dev_t is always 64 bits wide.
The former Linux implementation used inline functions to avoid evaluating
arguments more than once. After this change, all platforms use inline
functions, which means that three new symbols are added to the generic ABI.
(These symbols are in the user namespace, which is how they have always
been on Linux. They begin with "gnu_dev_", so collisions with user code
are pretty unlikely.)
New ports henceforth need only provide a bits/sysmacros.h defining
internal macros __SYSMACROS_{DECLARE,DEFINE}_{MAJOR,MINOR,MAKEDEV}.
This is only necessary if the kernel encoding is incompatible with
the now-generic encoding (for instance, it would be necessary for
FreeBSD).
While I was at it, I added a basic round-trip test for these functions.
* sysdeps/generic/sys/sysmacros.h: Delete file.
* sysdeps/unix/sysv/linux/makedev.c: Delete file.
* sysdeps/unix/sysv/linux/sys/sysmacros.h: Move file ...
* bits/sysmacros.h: ... here; this encoding is now the generic
encoding. Now defines only the following macros:
__SYSMACROS_DECLARE_MAJOR, __SYSMACROS_DEFINE_MAJOR,
__SYSMACROS_DECLARE_MINOR, __SYSMACROS_DEFINE_MINOR,
__SYSMACROS_DECLARE_MAKEDEV, __SYSMACROS_DEFINE_MAKEDEV.
* misc/sys/sysmacros.h, misc/makedev.c: New files that use
bits/sysmacros.h and the above new macros to generate the
public implementations of major, minor, and makedev.
* misc/tst-makedev.c: New test.
* include/sys/sysmacros.h: New wrapper.
* misc/Makefile (headers): Add sys/sysmacros.h, bits/sysmacros.h.
(routines): Add makedev.
(tests): Add tst-makedev.
* misc/Versions [GLIBC_2.25]: Add gnu_dev_major, gnu_dev_minor,
gnu_dev_makedev.
* posix/Makefile (headers): Remove sys/sysmacros.h.
* sysdeps/unix/sysv/linux/Makefile (sysdep_routines): Remove makedev.
* sysdeps/arm/nacl/libc.abilist: Add GLIBC_2.25,
gnu_dev_major, gnu_dev_makedev, gnu_dev_minor.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist
* sysdeps/unix/sysv/linux/alpha/libc.abilist
* sysdeps/unix/sysv/linux/arm/libc.abilist
* sysdeps/unix/sysv/linux/hppa/libc.abilist
* sysdeps/unix/sysv/linux/i386/libc.abilist
* sysdeps/unix/sysv/linux/ia64/libc.abilist
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist
* sysdeps/unix/sysv/linux/microblaze/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist
* sysdeps/unix/sysv/linux/nios2/libc.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist
* sysdeps/unix/sysv/linux/sh/libc.abilist
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist:
Add GLIBC_2.25.
TS 18661 adds nextup and nextdown functions alongside nextafter to provide
support for float128 equivalent to it. This patch adds nextupl, nextup,
nextupf, nextdownl, nextdown and nextdownf to libm before float128 support.
The nextup functions return the next representable value in the direction of
positive infinity and the nextdown functions return the next representable
value in the direction of negative infinity. These are currently enabled
as GNU extensions.
After some discussion in libc-alpha about this POSIX compliance fix, I see
that GLIBC should indeed revert back to previous definition of msghdr and
cmsghdr and implementation of sendmsg, recvmsg, sendmmsg, recvmmsg due some
reasons:
* The possible issue where the syscalls wrapper add the compatibility
layer is quite limited in scope and range. And kernel current
also add some limits to the values on the internal msghdr and
cmsghdr fields:
- msghdr::msg_iovlen larger than UIO_MAXIOV (1024) returns
EMSGSIZE.
- msghdr::msg_controllen larger than INT_MAX returns ENOBUFS.
* There is a small performance hit for recvmsg/sendmsg/recmmsg which
is neglectable, but it is a big hit for sendmmsg since now instead
of calling the syscall for the packed structure, GLIBC is calling
multiple sendmsg. This defeat the very existence of the syscall.
* It currently breaks libsanitizer build on GCC [1] (I fixed on compiler-rt).
However the fix is incomplete because it does add any runtime check
since libsanitizer currently does not have any facility to intercept
symbols with multiple version [2].
This, along with incorret dlsym/dlvsym return for versioned symbol due
another bug [3], makes hard to interpose versioned symbols.
Also, current approach of fixing GCC PR#71445 leads to half-baked
solutions without versioned symbol interposing.
This patch basically reverts commits 2f0dc39029, 222c2d7f43,
af7f7c7ec8. I decided to not revert abf29edd4a (Adjust
kernel-features.h defaults for recvmsg and sendmsg) mainly because it
does not really address the POSIX compliance original issue and also
adds some cleanups.
Tested on x86, i386, s390, s390x, aarch64, and powerpc64le.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71445
[2] https://github.com/google/sanitizers/issues/628
[3] https://sourceware.org/bugzilla/show_bug.cgi?id=14932
* conform/data/sys/socket.h-data (msghdr.msg_iovlen): Add xfail-.
(msghdr.msg_controllen): Likewise.
(cmsghdr.cmsg_len): Likewise.
* nptl/Makefile (libpthread-routines): Remove ptw-oldrecvmsg and
ptw-oldsendmsg.
(CFLAGS-oldrecvmsg.c): Remove rule.
(CFLAGS-oldsendmsg.c): Likewise.
(CFLAGS-recvmsg.c): Add rule.
(CFLAGS-sendmsg.c): Likewise.
* sysdeps/unix/sysv/linux/Makefile (sysdep_routines): Remove
oldrecvmsg, oldsendmsg, oldrecvmmsg, oldsendmmsg.
(CFLAGS-recvmsg.c): Remove rule.
(CFLAGS-sendmsg.c): Likewise.
(CFLAGS-oldrecvmsg.c): Likewise.
(CFLAGS-oldsendmsg.c): Likewise.
(CFLAGS-recvmmsg.c): Likewise.
* sysdeps/unix/sysv/linux/bits/socket.h (msghdr.msg_iovlen): Revert
to kernel defined interfaces.
(msghdr.msg_controllen): Likewise.
(cmsghdr.cmsg_len): Likewise.
(msghdr.__glibc_reserved1): Remove member.
(msghdr.__glibc_reserved2): Likewise.
(cmsghdr.__glibc_reserved1): Likewise.
* sysdeps/unix/sysv/linux/oldrecvmmsg.c: Remove file.
* sysdeps/unix/sysv/linux/oldrecvmsg.c: Likewise.
* sysdeps/unix/sysv/linux/oldsendmmsg.c: Likewise.
* sysdeps/unix/sysv/linux/oldsendmsg.c: Likewise.
* sysdeps/unix/sysv/linux/recvmmsg.c: Revert back to previous
version.
* sysdeps/unix/sysv/linux/recvmsg.c: Likewise.
* sysdeps/unix/sysv/linux/sendmmsg.c: Likewise.
* sysdeps/unix/sysv/linux/sendmsg.c: Likewise.
* sysdeps/unix/sysv/linux/aarch64/Versions [libc] (GLIBC_2.24):
Remove recvmsg and sendmsg.
* sysdeps/unix/sysv/linux/alpha/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/hppa/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/i386/Versions [libc] (GLIBC_2.24): Likewise.
* sysdeps/unix/sysv/linux/m68k/Versions [libc] (GLIBC_2.24): Likewise.
* sysdeps/unix/sysv/linux/microblaze/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/Versions
[libc] (GLIBC_2.24): Likewise.
* sysdeps/unix/sysv/linux/nios2/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/Versions
[libc] (GLIBC_2.24): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/sh/Versions [libc] (GLIBC_2.24): Likewise.
* sysdeps/unix/sysv/linux/sparc/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/tile/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/Versions [libc] (GLIBC_2.24):
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/Versions: Remove file
* sysdeps/unix/sysv/linux/x86_64/64/Versions: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/Versions: Likewise.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Remove new 2.24
version for {recv,send,recm,sendm}msg.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
In C++11 18.5.12 says "Objects shall not be destroyed as a
result of calling quick_exit." In C11 quick_exit is silent
about thread object destruction. Therefore to make glibc
C++ compliant we do not call any thread local destructors.
A new regression test verifies the fix.
I will note that C++11 18.5.3 makes it clear that C++
defines additional requirements for _Exit() to prevent it
from executing destructors.
Given that the point of _Exit() is to terminate the process
immediately it makes sense the C and C++ should line up
and avoid calling destructors.
No failures. New regtest passes.
POSIX specifies that both msghdr::msg_iovlen and msghdr::msg_controllen
to be of size int and socklen_t respectively, however Linux implements
it as a size_t. So for 64-bits architecture where sizeof of size_t is
larger than socklen_t, both sendmmsg and recvmmsg need to adjust the
mmsghdr::msg_hdr internal fields before issuing the syscall itself.
This patch fixes it by operating on the padding if it the case.
For recvmmsg, the most straightfoward case, only zero padding the fields
is suffice. However, for sendmmsg, where adjusting the buffer is out
of the contract (since it may point to a read-only data), the function
is rewritten to use sendmsg instead (which from previous patch
allocates a temporary msghdr to operate on).
Also for 64-bit ports that requires it, a new recvmmsg and sendmmsg
compat version is created (which uses size_t for both cmsghdr::cmsg_len
and internal
Tested on x86_64, i686, aarch64, armhf, and powerpc64le.
* sysdeps/unix/sysv/linux/Makefile
[$(subdir) = socket] (sysdep_routines): Add oldrecvmmsg and
oldsendmmsg.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Add recvmmsg and
sendmmsg.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/oldrecvmmsg.c: New file.
* sysdeps/unix/sysv/linux/oldsendmmsg.c: Likewise.
* sysdeps/unix/sysv/linux/recvmmsg.c (__recvmmsg): Adjust msghdr
iovlen and controllen fields to adjust to POSIX specification.
* sysdeps/unix/sysv/linux/sendmmsg.c (__sendmmsg): Likewise.
This patch fixes the clone CLONE_VM change from 0cb313f (BZ#19957)
where the commit changed the register that contains the save flags
argument to compare with (from r28 to r29). This patch changes
back to correct register.
Tested on powerpc32 (thanks to Tulio Magno Quites Machado Filho).
* sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S (__clone): Fix
flags CLONE_VM compare.
As discussed in libc-alpha [1] current clone with CLONE_VM (without
CLONE_THREAD set) will reset the pthread pid/tid fields to -1. The
issue is since memory is shared between the parent and child it will
clobber parent's cached pid/tid leading to internal inconsistencies
if the value is not restored.
And even it is restored it may lead to racy conditions when between
set/restore a thread might invoke pthread function that validate the
pthread with INVALID_TD_P/INVALID_NOT_TERMINATED_TD_P and thus get
wrong results.
As stated in BZ19957, previously reports of this behaviour was close
with EWONTFIX due the fact usage of clone outside glibc is tricky
since glibc requires consistent internal pthread, while using clone
directly may not provide it. However since now posix_spawn uses
clone (CLONE_VM) to fixes various issues related to previous vfork
usage this issue requires fixing.
The vfork implementation also does something similar, but instead
it negates and restores only the *pid* field and functions that
might access its value know to handle such case (getpid, raise
and pthread ones that uses INVALID_TD_P/INVALID_NOT_TERMINATED_TD_P
macros that check only *tid* field). Also vfork does not call
__clone directly, instead calling either __NR_vfork or __NR_clone
directly.
So this patch removes this clone behavior by avoiding setting
the pthread pid/tid field for CLONE_VM. There is no need to
check for CLONE_THREAD, since the minimum supported kernel in all
architecture implies that CLONE_VM must be used with CLONE_THREAD,
otherwise clone returns EINVAL.
Instead of current approach of:
int clone(int (*fn)(void *), void *child_stack, int flags, ...)
[...]
if (flags & CLONE_THREAD)
goto do_syscall;
pid_t new_value;
if (flags & CLONE_VM)
new_value = -1;
else
new_value = getpid ();
THREAD_SETMEM (THREAD_SELF, pid, new_value);
THREAD_SETMEM (THREAD_SELF, tid, new_value);
do_syscall:
[...]
The new approach uses:
int clone(int (*fn)(void *), void *child_stack, int flags, ...)
[...]
if (flags & CLONE_VM)
goto do_syscall;
pid_t new_value = getpid ();
THREAD_SETMEM (THREAD_SELF, pid, new_value);
THREAD_SETMEM (THREAD_SELF, tid, new_value);
do_syscall:
[...]
It also removes the linux tst-getpid2.c test which expects the previous
behavior and instead add another clone test.
Tested on x86_64, i686, x32, powerpc64le, aarch64, armhf, s390, and
s390x. I also did limited check on mips32 and sparc64 (using the new
added test).
I also got reviews from both m68k, hppa, and tile. So I presume for
these architecture the patch works.
The fixes for alpha, microblaze, sh, ia64, and nio2 have not been
tested.
[1] https://sourceware.org/ml/libc-alpha/2016-04/msg00307.html
* sysdeps/unix/sysv/linux/Makefile [$(subdir) == nptl] (test): Remove
tst-getpid2.
(test): Add tst-clone2.
* sysdeps/unix/sysv/linux/tst-clone2.c: New file.
* sysdeps/unix/sysv/linux/aarch64/clone.S (__clone): Do not change
pid/tid fields for CLONE_VM.
* sysdeps/unix/sysv/linux/arm/clone.S: Likewise.
* sysdeps/unix/sysv/linux/i386/clone.S: Likewise.
* sysdeps/unix/sysv/linux/mips/clone.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/tst-getpid2.c: Remove file.
This patch consolidates all the pwrite/pwrite64 implementation for Linux
in only one (sysdeps/unix/sysv/linux/pwrite{64}.c). It also removes the
syscall from the auto-generation using assembly macros.
For pwrite{64} offset argument placement the new SYSCALL_LL{64} macro
is used. For pwrite ports that do not define __NR_pwrite will use
__NR_pwrite64 and for pwrite64 ports that dot define __NR_pwrite64 will
use __NR_pwrite for the syscall.
Checked on x86_64, x32, i386, aarch64, and ppc64le.
* sysdeps/unix/sysv/linux/arm/pwrite.c: Remove file.
* sysdeps/unix/sysv/linux/arm/pwrite64.c: Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/pwrite.c: Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/pwrite64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/pwrite.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/pwrite64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/pwrite64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list (prite): Remove
syscalls generation.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h
[__NR_pwrite64] (__NR_write): Remove define.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h
[__NR_pwrite64] (__NR_write): Remove define.
* sysdeps/unix/sysv/linux/pwrite.c [__NR_pwrite64] (__NR_pwrite):
Remove define.
(__libc_pwrite): Use SYSCALL_LL macro on offset argument.
* sysdeps/unix/sysv/linux/pwrite64.c [__NR_pwrite64] (__NR_pwrite):
Remove define.
(__libc_pwrite64): Use SYSCALL_LL64 macro on offset argument.
* sysdeps/unix/sysv/linux/sh/pwrite.c: Rewrite using default
Linux implementation as base.
* sysdeps/unix/sysv/linux/sh/pwrite64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/pwrite.c: Likewise.
* sysdeps/unix/sysv/linux/mips/pwrite64.c: Likewise.
This patch consolidates all the pread/pread64 implementation for Linux
in only one (sysdeps/unix/sysv/linux/pread.c). It also removes the
syscall from the auto-generation using assembly macros.
For pread{64} offset argument placement the new SYSCALL_LL{64} macro
is used. For pread ports that do not define __NR_pread will use
__NR_pread64 and for pread64 ports that dot define __NR_pread64 will
use __NR_pread for the syscall.
Checked on x86_64, x32, i386, aarch64, and ppc64le.
* sysdeps/unix/sysv/linux/arm/pread.c: Remove file.
* sysdeps/unix/sysv/linux/arm/pread64.c: Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/pread.c: Likewise.
* sysdeps/unix/sysv/linux/generic/wordsize-32/pread64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/pread.c: Likewise,
* sysdeps/unix/sysv/linux/powerpc/powerpc32/pread64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/pread64.c: Likewise.
* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list (pread): Remove
syscall generation.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h
[__NR_pread64] (__NR_pread): Remove define.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h:
[__NR_pread64] (__NR_pread): Likewise.
* sysdeps/unix/sysv/linux/pread.c [__NR_pread64] (__NR_pread): Remove
define.
(__libc_pread): Use SYSCALL_LL macro on offset argument.
* sysdeps/unix/sysv/linux/pread64.c [__NR_pread64] (__NR_pread):
Remove define.
(__libc_pread64): Use SYSCALL_LL64 macro on offset argument.
* sysdeps/unix/sysv/linux/sh/pread.c: Rewrite using default
Linux implementation as base.
* sysdeps/unix/sysv/linux/sh/pread64.c: Likewise.
* sysdeps/unix/sysv/linux/mips/pread.c: Likewise.
* sysdeps/unix/sysv/linux/mips/pread64.c: Likewise.
This patch defines __ASSUME_ALIGNED_REGISTER_PAIRS for the missing
ports that require 64-bit value (e.g., long long) to be aligned to
an even register pair in argument passing.
No code change is expected, tested with builds for powerpc32,
mips-o32, and armhf.
* sysdeps/unix/sysv/linux/arm/kernel-features.h
(__ASSUME_ALIGNED_REGISTER_PAIRS): Define.
* sysdeps/unix/sysv/linux/mips/kernel-features.h
[_MIPS_SIM == _ABIO32] (__ASSUME_ALIGNED_REGISTER_PAIRS): Likewise.
* sysdeps/unix/sysv/linux/powerpc/kernel-features.h
[!__powerpc64__] (__ASSUME_ALIGNED_REGISTER_PAIRS): Likewise.
bits/termios.h (various versions under sysdeps/unix/sysv/linux)
defines XCASE if defined __USE_MISC || defined __USE_XOPEN. This
macro was removed in the 2001 edition of POSIX, and is not otherwise
reserved, so should not be defined for 2001 and later versions of
POSIX. This patch fixes the conditions accordingly (leaving the macro
defined for __USE_MISC, so still in the default namespace).
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
[BZ #19925]
* sysdeps/unix/sysv/linux/alpha/bits/termios.h (XCASE): Do not
define if [!__USE_MISC && __USE_XOPEN2K].
* sysdeps/unix/sysv/linux/bits/termios.h (XCASE): Likewise.
* sysdeps/unix/sysv/linux/mips/bits/termios.h (XCASE): Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios.h (XCASE):
Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios.h (XCASE): Likewise.
* conform/Makefile (test-xfail-XOPEN2K/termios.h/conform): Remove
variable.
(test-xfail-XOPEN2K8/termios.h/conform): Likewise.
This patch adjusts the defaults for kernel-features.h macros relating
to availability of accept4, recvmmsg and sendmmsg. It is not intended
to affect which macros end up getting defined in any configuration.
At present, all architectures with syscalls for those functions need
to define __ASSUME_*_SYSCALL macros; in particular, any new
architecture needs its own kernel-features.h file for that purpose,
though it may not otherwise need such a header. Those macros are then
used together with __ASSUME_SOCKETCALL to define macros for whether
the functions in question are available.
This patch changes the defaults so that the syscalls are assumed to be
available by default with recent-enough kernels, and it is the
responsibility of architecture headers to undefine the macros if they
are unavailable in supported kernels at least as recent as the version
where the architecture-independent functionality was introduced. The
__ASSUME_<function> macros are defaulted similarly instead of being
defined based on other macros (defining based on other macros would no
longer work because the #undefs appear after the generic header is
included), so where the syscall being unavailable means the function
is unavailable this means the architecture header has to undefine the
__ASSUME_<function> macro; this only affects __ASSUME_ACCEPT4 for
ia64, as other cases where the syscalls were added late enough to be
relevant with current kernel version requirements are all on
socketcall architectures.
As a consequence, the AArch64 and Nios II kernel-features.h header
files are removed, and others simplified. When the minimum kernel
version becomes 4.3 or later on all architectures, the syscalls in
question can just be assumed unconditionally, permitting further
simplification.
Tested for x86_64, x86 and powerpc (that installed shared libraries
are unchanged by the patch, and testsuite for x86_64 and x86).
* sysdeps/unix/sysv/linux/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Define unconditionally.
(__ASSUME_ACCEPT4): Likewise.
[__LINUX_KERNEL_VERSION >= 0x020621] (__ASSUME_RECVMMSG_SYSCALL):
Define.
[__LINUX_KERNEL_VERSION >= 0x020621] (__ASSUME_RECVMMSG):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x030000] (__ASSUME_SENDMMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x030000] (__ASSUME_SENDMMSG):
Likewise.
* sysdeps/unix/sysv/linux/aarch64/kernel-features.h: Remove file.
* sysdeps/unix/sysv/linux/nios2/kernel-features.h: Likewise.
* sysdeps/unix/sysv/linux/alpha/kernel-features.h
(__ASSUME_RECVMMSG_SYSCALL): Do not define.
(__ASSUME_ACCEPT4_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/arm/kernel-features.h
(__ASSUME_RECVMMSG_SYSCALL): Likewise.
(__ASSUME_ACCEPT4_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/hppa/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Likewise.
(__ASSUME_RECVMMSG_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/i386/kernel-features.h
[__LINUX_KERNEL_VERSION >= 0x020621] (__ASSUME_RECVMMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x030000] (__ASSUME_SENDMMSG_SYSCALL):
Likewise.
(__ASSUME_ACCEPT4_SYSCALL): Undefine if [__LINUX_KERNEL_VERSION <
0x040300] instead of defining if [__LINUX_KERNEL_VERSION >=
0x040300].
* sysdeps/unix/sysv/linux/ia64/kernel-features.h
(__ASSUME_RECVMMSG_SYSCALL): Do not define.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
(__ASSUME_ACCEPT4_SYSCALL): Undefine if [__LINUX_KERNEL_VERSION <
0x030300] instead of defining if [__LINUX_KERNEL_VERSION >=
0x030300].
[__LINUX_KERNEL_VERSION < 0x030300] (__ASSUME_ACCEPT4): Undefine.
* sysdeps/unix/sysv/linux/m68k/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Undefine if [__LINUX_KERNEL_VERSION <
0x040300] instead of defining if [__LINUX_KERNEL_VERSION >=
0x040300].
(__ASSUME_RECVMMSG_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/microblaze/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Do not define.
(__ASSUME_RECVMMSG_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Undefine if [__LINUX_KERNEL_VERSION <
0x030300] instead of defining if [__LINUX_KERNEL_VERSION >=
0x030300].
* sysdeps/unix/sysv/linux/mips/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Do not define.
(__ASSUME_RECVMMSG_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/powerpc/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Likewise.
(__ASSUME_RECVMMSG_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/s390/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Undefine if [__LINUX_KERNEL_VERSION <
0x040300] instead of defining if [__LINUX_KERNEL_VERSION >=
0x040300].
(__ASSUME_RECVMMSG_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/sh/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Do not define.
(__ASSUME_RECVMMSG_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/sparc/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Likewise.
(__ASSUME_RECVMMSG_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/tile/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Likewise.
(__ASSUME_RECVMMSG_SYSCALL): Likewise.
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
* sysdeps/unix/sysv/linux/x86_64/kernel-features.h
(__ASSUME_ACCEPT4_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x020621] (__ASSUME_RECVMMSG_SYSCALL):
Likewise.
[__LINUX_KERNEL_VERSION >= 0x030000] (__ASSUME_SENDMMSG_SYSCALL):
Likewise.
This patch implements a new posix_spawn{p} implementation for Linux. The main
difference is it uses the clone syscall directly with CLONE_VM and CLONE_VFORK
flags and a direct allocated stack. The new stack and start function solves
most the vfork limitation (possible parent clobber due stack spilling). The
remaning issue are related to signal handling:
1. That no signal handlers must run in child context, to avoid corrupt
parent's state.
2. Child must synchronize with parent to enforce stack deallocation and
to possible return execv issues.
The first one is solved by blocking all signals in child, even NPTL-internal
ones (SIGCANCEL and SIGSETXID). The second issue is done by a stack allocation
in parent and a synchronization with using a pipe or waitpid (in case or error).
The pipe has the advantage of allowing the child signal an exec error (checked
with new tst-spawn2 test).
There is an inherent race condition in pipe2 usage for architectures that do not
support the syscall directly. In such cases the a pipe plus fctnl is used
instead and it may lead to file descriptor leak in parent (as decribed by fcntl
documentation).
The child process stack is allocate with a mmap with MAP_STACK flag using
default architecture stack size. Although it is slower than use a stack buffer
from parent, it allows some slack for the compatibility code to run scripts
with no shebang (which may use a buffer with size depending of argument list
count).
Performance should be similar to the vfork default posix implementation and
way faster than fork path (vfork on mostly linux ports are basically
clone with CLONE_VM plus CLONE_VFORK). The only difference is the syscalls
required for the stack allocation/deallocation.
It fixes BZ#10354, BZ#14750, and BZ#18433.
Tested on i386, x86_64, powerpc64le, and aarch64.
[BZ #14750]
[BZ #10354]
[BZ #18433]
* include/sched.h (__clone): Add hidden prototype.
(__clone2): Likewise.
* include/unistd.h (__dup): Likewise.
* posix/Makefile (tests): Add tst-spawn2.
* posix/tst-spawn2.c: New file.
* sysdeps/posix/dup.c (__dup): Add hidden definition.
* sysdeps/unix/sysv/linux/aarch64/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/alpha/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/arm/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/hppa/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/i386/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/ia64/clone2.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/m68k/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/microblaze/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/mips/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/nios2/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S (__clone):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S (__clone):
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/sh/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/tile/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/x86_64/clone.S (__clone): Likewise.
* sysdeps/unix/sysv/linux/nptl-signals.h
(____nptl_is_internal_signal): New function.
* sysdeps/unix/sysv/linux/spawni.c: New file.
Testing for powerpc-nofpu showed that localplt.data was out of date.
Two new soft-fp functions showed up in the list: __gtsf2 and
__unordsf2; this patch adds these as optional. __signbit and
__signbitl no longer appear as local PLT entries; given the move to
__builtin_signbit* for all GCC versions supported for building glibc
(and given the use of the type-generic signbit macro within glibc),
those can safely be removed from the list, which this patch does.
Tested for powerpc-nofpu.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/localplt.data
(__gtsf2): Add as optional for libc.so.
(__unordsf2): Likewise.
(__signbit): Remove for libc.so.
(__signbitl): Likewise.
This patch adds some new header definitions from Linux 4.4:
* MCL_ONFAULT is added to bits/mman.h / bits/mman-linux.h (this was
already done for hppa).
* PTRACE_SECCOMP_GET_FILTER is added to sys/ptrace.h. Along with it,
the older PTRACE_GETSIGMASK and PTRACE_SETSIGMASK, added in Linux
3.11 but missed at the time, are also added.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* bits/mman-linux.h [!MCL_CURRENT] (MCL_ONFAULT): New macro.
* sysdeps/unix/sysv/linux/alpha/bits/mman.h (MCL_ONFAULT):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/mman.h (MCL_ONFAULT):
Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/mman.h (MCL_ONFAULT):
Likewise.
* sysdeps/unix/sysv/linux/sys/ptrace.h (PTRACE_GETSIGMASK): New
enum constant and macro.
(PTRACE_SETSIGMASK): Likewise.
(PTRACE_SECCOMP_GET_FILTER): Likewise.
* sysdeps/unix/sysv/linux/aarch64/sys/ptrace.h
(PTRACE_GETSIGMASK): Likewise.
(PTRACE_SETSIGMASK): Likewise.
(PTRACE_SECCOMP_GET_FILTER): Likewise.
* sysdeps/unix/sysv/linux/ia64/sys/ptrace.h (PTRACE_GETSIGMASK):
Likewise.
(PTRACE_SETSIGMASK): Likewise.
(PTRACE_SECCOMP_GET_FILTER): Likewise.
* sysdeps/unix/sysv/linux/powerpc/sys/ptrace.h
(PTRACE_GETSIGMASK): Likewise.
(PTRACE_SETSIGMASK): Likewise.
(PTRACE_SECCOMP_GET_FILTER): Likewise.
* sysdeps/unix/sysv/linux/s390/sys/ptrace.h (PTRACE_GETSIGMASK):
Likewise.
(PTRACE_SETSIGMASK): Likewise.
(PTRACE_SECCOMP_GET_FILTER): Likewise.
* sysdeps/unix/sysv/linux/sparc/sys/ptrace.h (PTRACE_GETSIGMASK):
Likewise.
(PTRACE_SETSIGMASK): Likewise.
(PTRACE_SECCOMP_GET_FILTER): Likewise.
* sysdeps/unix/sysv/linux/tile/sys/ptrace.h (PTRACE_GETSIGMASK):
Likewise.
(PTRACE_SETSIGMASK): Likewise.
(PTRACE_SECCOMP_GET_FILTER): Likewise.
Work around a GCC behavior with hardware transactional memory built-ins.
GCC doesn't treat the PowerPC transactional built-ins as compiler
barriers, moving instructions past the transaction boundaries and
altering their atomicity.
This patch adds a new feature for powerpc. In order to get faster access to
the HWCAP/HWCAP2 bits and platform number (i.e. for implementing
__builtin_cpu_is () / __builtin_cpu_supports () in GCC) without the overhead of
reading from the auxiliary vector, we now reserve space for them in the TCB.
This is an ABI change for GLIBC 2.23.
A new versioned symbol '__parse_hwcap_and_convert_at_platform' is available to
get the data from the auxiliary vector and parse it, and store it for later use
in the TLS initialization code. This function is called very early
(in _dl_sysdep_start () via DL_PLATFORM_INFO for the dynamic linking case, and
in __libc_start_main () for the static linking case) to make sure the data is
available at the time of TLS initialization.
* sysdeps/powerpc/Makefile (sysdep-dl-routines): Add hwcapinfo.
(sysdep_routines): Likewise.
(sysdep-rtld-routines): Likewise.
[$(subdir) = nptl](tests): Add test-get_hwcap and test-get_hwcap-static
[$(subdir) = nptl](tests-static): test-get_hwcap-static
* sysdeps/powerpc/Versions: Added new
__parse_hwcap_and_convert_at_platform symbol to GLIBC-2.23.
* sysdeps/powerpc/hwcapinfo.c: New file.
(__tcb_parse_hwcap_and_convert_at_platform): New function to initialize
and parse hwcap, hwcap2 and platform number information.
* sysdeps/powerpc/hwcapinfo.h: New file. Creates global variables
to store HWCAP+HWCAP2 and platform number.
* sysdeps/powerpc/nptl/tcb-offsets.sym: Added new offsets
for HWCAP+HWCAP2 and platform number in the TCB.
* sysdeps/powerpc/nptl/tls.h: New functionality. Stores
the HWCAP, HWCAP2 and platform number in the TCB.
(dtv): Added new fields for HWCAP+HWCAP2 and platform number.
(TLS_INIT_TP): Included calls to add the hwcap and
at_platform values in the TCB in TP initialization.
(TLS_DEFINE_INIT_TP): Likewise.
(THREAD_GET_HWCAP): New macro.
(THREAD_SET_HWCAP): Likewise.
(THREAD_GET_AT_PLATFORM): Likewise.
(THREAD_SET_AT_PLATFORM): Likewise.
* sysdeps/powerpc/powerpc32/dl-machine.h:
(dl_platform_init): New function that calls
__parse_hwcap_and_convert_at_platform for the dymanic linking case for
powerpc32.
* sysdeps/powerpc/powerpc64/dl-machine.h: Likewise, for powerpc64.
* sysdeps/powerpc/test-get_hwcap-static.c: New file. Testcase for
this functionality, static linking case.
* sysdeps/powerpc/test-get_hwcap.c: New file. Likewise, dynamic
linking case.
* sysdeps/unix/sysv/linux/powerpc/libc-start.c: Added call to
__parse_hwcap_and_convert_at_platform for the static linking case.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/ld.abilist:
Included the new __parse_hwcap_and_convert_at_platform symbol in the
ABI list for GLIBC 2.23.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/ld-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/ld.abilist:
Likewise.
In preparation to fix the --localedir configure argument we must
move the existing conflicting definition of localedir to a more
appropriate name. Given that all current internal uses of localedir
relate to the compiled locales we rename to complocaledir.
This patch updates <sys/ptrace.h> for Linux 4.3, adding
PTRACE_O_SUSPEND_SECCOMP and updating the value of PTRACE_O_MASK.
Some architectures were missing the older PTRACE_O_EXITKILL, so that
was added to the files missing it as well.
Tested for x86_64 (testsuite, and that installed shared libraries are
unchanged by the patch).
* sysdeps/unix/sysv/linux/aarch64/sys/ptrace.h
(PTRACE_O_EXITKILL): New value in enum __ptrace_setoptions.
(PTRACE_O_SUSPEND_SECCOMP): Likewise.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/ia64/sys/ptrace.h (PTRACE_O_EXITKILL):
New value in enum __ptrace_setoptions.
(PTRACE_O_SUSPEND_SECCOMP): Likewise.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/powerpc/sys/ptrace.h
(PTRACE_O_SUSPEND_SECCOMP): New value in enum __ptrace_setoptions.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/s390/sys/ptrace.h
(PTRACE_O_SUSPEND_SECCOMP): New value in enum __ptrace_setoptions.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/sparc/sys/ptrace.h
(PTRACE_O_SUSPEND_SECCOMP): New value in enum __ptrace_setoptions.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/sys/ptrace.h (PTRACE_O_SUSPEND_SECCOMP):
New value in enum __ptrace_setoptions.
(PTRACE_O_MASK): Update value.
* sysdeps/unix/sysv/linux/tile/sys/ptrace.h (PTRACE_O_EXITKILL):
New value in enum __ptrace_setoptions.
(PTRACE_O_SUSPEND_SECCOMP): Likewise.
(PTRACE_O_MASK): Update value.
The lgamma (and likewise lgammaf, lgammal) function wrongly sets the
signgam variable even when building for strict ISO C conformance
(-std=c99 / -std=c11), although the user may define such a variable
and it's only in the implementation namespace for POSIX with XSI
extensions enabled.
Following discussions starting at
<https://sourceware.org/ml/libc-alpha/2013-04/msg00767.html> and
<https://sourceware.org/ml/libc-alpha/2015-10/msg00844.html>, it seems
that the safest approach for fixing this particular issue is for
signgam to become a weak alias for a newly exported symbol __signgam,
with the library functions only setting __signgam, at which point
static linker magic will preserve the alias for newly linked binaries
that refer to the library's signgam rather than defining their own,
while breaking the alias for programs that define their own signgam,
with new symbol versions for lgamma functions and with compat symbols
for existing binaries that set both signgam and __signgam.
This patch implements that approach for the fix. signgam is made into
a weak alias. The four symbols __signgam, lgamma, lgammaf, lgammal
get new symbol versions at version GLIBC_2.23, with the existing
versions of lgamma, lgammaf and lgammal becoming compat symbols.
When the compat versions are built, gamma, gammaf and gammal are
aliases for the compat versions (i.e. always set signgam); this is OK
as they are not ISO C functions, and avoids adding new symbol versions
for them unnecessarily. When the compat versions are not built
(i.e. for static linking and for future glibc ports), gamma, gammaf
and gammal are aliases for the new versions that set __signgam. The
ldbl-opt versions are updated accordingly.
The lgamma wrappers are adjusted so that the same source files,
included from different files with different definitions of
USE_AS_COMPAT, can build either the new versions or the compat
versions. Similar changes are made to the ia64 versions (untested).
Tests are added that the lgamma functions do not interfere with a user
variable called signgam for ISO C, with various choices for the size
of that variable, whether it is initialized, and for static and
dynamic linking. The conformtest whitelist entry is removed as well.
Tested for x86_64, x86, mips64 and powerpc, including looking at
objdump --dynamic-syms output to make sure the expected sets of
symbols were aliases. Also spot-tested that a binary built with old
glibc works properly (i.e. gets signgam set) when run with new glibc.
[BZ #15421]
* sysdeps/ieee754/s_signgam.c (signgam): Rename to __signgam,
initialize with 0 and define as weak alias of __signgam.
* include/math.h [!_ISOMAC] (__signgam): Declare.
* math/Makefile (libm-calls): Add w_lgamma_compat.
(tests): Add test-signgam-uchar, test-signgam-uchar-init,
test-signgam-uint, test-signgam-uint-init, test-signgam-ullong and
test-signgam-ullong-init.
(tests-static): Add test-signgam-uchar-static,
test-signgam-uchar-init-static, test-signgam-uint-static,
test-signgam-uint-init-static, test-signgam-ullong-static and
test-signgam-ullong-init-static.
(CFLAGS-test-signgam-uchar.c): New variable.
(CFLAGS-test-signgam-uchar-init.c): Likewise.
(CFLAGS-test-signgam-uchar-static.c): Likewise.
(CFLAGS-test-signgam-uchar-init-static.c): Likewise.
(CFLAGS-test-signgam-uint.c): Likewise.
(CFLAGS-test-signgam-uint-init.c): Likewise.
(CFLAGS-test-signgam-uint-static.c): Likewise.
(CFLAGS-test-signgam-uint-init-static.c): Likewise.
(CFLAGS-test-signgam-ullong.c): Likewise.
(CFLAGS-test-signgam-ullong-init.c): Likewise.
(CFLAGS-test-signgam-ullong-static.c): Likewise.
(CFLAGS-test-signgam-ullong-init-static.c): Likewise.
* math/Versions (libm): Add GLIBC_2.23.
* math/lgamma-compat.h: New file.
* math/test-signgam-main.c: Likewise.
* math/test-signgam-uchar-init-static.c: Likewise.
* math/test-signgam-uchar-init.c: Likewise.
* math/test-signgam-uchar-static.c: Likewise.
* math/test-signgam-uchar.c: Likewise.
* math/test-signgam-uint-init-static.c: Likewise.
* math/test-signgam-uint-init.c: Likewise.
* math/test-signgam-uint-static.c: Likewise.
* math/test-signgam-uint.c: Likewise.
* math/test-signgam-ullong-init-static.c: Likewise.
* math/test-signgam-ullong-init.c: Likewise.
* math/test-signgam-ullong-static.c: Likewise.
* math/test-signgam-ullong.c: Likewise.
* math/w_lgamma.c: Rename to w_lgamma_main.c and replace by
wrapper of w_lgamma_main.c.
* math/w_lgamma_compat.c: New file.
* math/w_lgamma_compatf.c: Likewise.
* math/w_lgamma_compatl.c: Likewise.
* math/w_lgamma_main.c: New file. Based on w_lgamma.c. Include
<lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support
defining compatibility symbols.
(__lgamma): Change to LGFUNC (__lgamma). Use CALL_LGAMMA.
* math/w_lgammaf.c: Rename to w_lgammaf_main.c and replace by
wrapper of w_lgammaf_main.c.
* math/w_lgammaf_main.c: New file. Based on w_lgammaf.c. Include
<lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support
defining compatibility symbols.
(__lgammaf): Change to LGFUNC (__lgammaf). Use CALL_LGAMMA.
* math/w_lgammal.c: Rename to w_lgammal_main.c and replace by
wrapper of w_lgammal_main.c.
* math/w_lgammal_main.c: New file. Based on w_lgammal.c. Include
<lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support
defining compatibility symbols.
(__lgammal): Change to LGFUNC (__lgammal). Use CALL_LGAMMA.
* sysdeps/ia64/fpu/lgamma-compat.h: New file.
* sysdeps/ia64/fpu/w_lgamma.c: Move to ....
* sysdeps/ia64/fpu/w_lgamma_main.c: ...here. Include
<lgamma-compat.h>.
(__ieee754_lgamma): Change to LGFUNC (lgamma). Use CALL_LGAMMA.
(__ieee754_gamma): Define as alias.
* sysdeps/ia64/fpu/w_lgammaf.c: Move to ....
* sysdeps/ia64/fpu/w_lgammaf_main.c: ...here. Include
<lgamma-compat.h>.
(__ieee754_lgammaf): Change to LGFUNC (lgammaf). Use CALL_LGAMMA.
(__ieee754_gammaf): Define as alias.
* sysdeps/ia64/fpu/w_lgammal.c: Move to ....
* sysdeps/ia64/fpu/w_lgammal_main.c: ...here. Include
<lgamma-compat.h>.
(__ieee754_lgammal): Change to LGFUNC (lgammal). Use CALL_LGAMMA.
(__ieee754_gammal): Define as alias.
* sysdeps/ieee754/ldbl-opt/w_lgamma.c: Move to ....
* sysdeps/ieee754/ldbl-opt/w_lgamma_compat.c: ...here. Include
<math/w_lgamma_compat.c>.
[LONG_DOUBLE_COMPAT(libm, GLIBC_2_0)] (__lgammal_dbl_compat):
Define as alias of __lgamma_compat and use in defining lgammal.
* sysdeps/ieee754/ldbl-opt/w_lgammal.c: Move to ....
* sysdeps/ieee754/ldbl-opt/w_lgamma_compatl.c: ...here. Include
<math/lgamma-compat.h> and <math/w_lgamma_compatl.c>.
(USE_AS_COMPAT): New macro.
(LGAMMA_OLD_VER): Undefine and redefine.
(lgammal): Do not define here.
(gammal): Only define here if [GAMMA_ALIAS].
* conform/linknamespace.pl (@whitelist): Remove signgam.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
This patch optimizes powerpc spinlock implementation by:
* Use the correct EH hint bit on the larx for supported ISA. For lock
acquisition, the thread that acquired the lock with a successful stcx
does not want to give away the write ownership on the cacheline. The
idea is to make the load reservation "sticky" about retaining write
authority to the line. That way, the store that must inevitably come
to release the lock can succeed quickly and not contend with other
threads issuing lwarx. If another thread does a store to the line
(false sharing), the winning thread must give up write authority to
the proper value of EH for the larx for a lock acquisition is 1.
* Increase contented lock performance by up to 40%, and no measurable
impact on uncontended locks on P8.
Thanks to Adhemerval Zanella who did most of the work. I've run some
tests, and addressed some minor feedback.
* sysdeps/powerpc/nptl/pthread_spin_lock.c (pthread_spin_lock):
Add lwarx hint, and use macro for acquire instruction.
* sysdeps/powerpc/nptl/pthread_spin_trylock.c (pthread_spin_trylock):
Likewise.
* sysdep/unix/sysv/linux/powerpc/pthread_spin_unlock.c: Move to ...
* sysdeps/powerpc/nptl/pthread_spin_unlock.c: ... here, and
update to use new atomic macros.
__lll_trylock_elision sets the adapt_count variable too
aggressively, and incorrectly on persistent aborts. Taking
a cue from s390, adapt_count is only updated if the lock
is locked, or a persistent failure occurs.
In addition, the abort codes have been renumbered and
refactored for clarity. As it stands, glibc only cares
if the abort is persistent or not.
All aborts are now persistent, excepting a busy lock. This
includes changing _ABORT_NESTED_TRYLOCK into a persistent
abort.
* sysdeps/unix/sysv/linux/powerpc/elision-trylock.c
(__lll_trylock_elision): Fix setting of adapt_count.
* sysdeps/unix/sysv/linux/powerpc/htm.h
(_ABORT_PERSISTENT): Define to clarify persistent aborts.
(_ABORT_NESTED_TRYLOCK): Renumber, and make persistent.
(_ABORT_SYSCALL): Renumber, and clarify definition.
(_ABORT_LOCK_BUSY): Renumber, make non-persistent.
The new format lists the version on each line, as in:
VERSION SYMBOL TYPE [VALUE]
This makes it easier to process the files with line-oriented tools.
The abilist files were converted with this awk script:
/^[^ ]/ { version = $1 }
/^ / { print version, substr($0, 2) }
And sorted under the "C" locale with sort.
The skip_lock_out_of_tbegin_retries adaptive parameter was
not being used correctly, nor as described. This prevents
a fallback for all users of the lock if a transient abort
occurs within the accepted number of retries.
[BZ #19174]
* sysdeps/powerpc/nptl/elide.h (__elide_lock): Fix usage of
.skip_lock_out_of_tbegin_retries.
* sysdeps/unix/sysv/linux/powerpc/elision-lock.c
(__lll_lock_elision): Likewise, and respect a value of
try_tbegin <= 0.
Since GLIBC requires a minimum 2.6.32 kernel, the patch cleanups
the mips code to assume __NR_sync_file_range and the powerpc one
to either assume __NR_sync_file_range2 or __NR_sync_file_range.
Checked on powerpc64le and build for mips (ABIO32, ABIN32, and ABI64).
* sysdeps/unix/sysv/linux/powerpc/powerpc64/sync_file_range.c
(__NR_sync_file_range2): Assume it is always defined.
* sysdeps/unix/sysv/linux/mips/mips32/sync_file_range.c
(__NR_sync_file_range): Assume it is always defined.
With TLE enabled, the adapt count variable update incurs
an 8% overhead before entering the critical section of an
elided mutex.
Instead, if it is done right after leaving the critical
section, this serialization can be avoided.
This alters the existing behavior of __lll_trylock_elision
as it will only decrement the adapt_count if it successfully
acquires the lock.
* sysdeps/unix/sysv/linux/powerpc/elision-lock.c
(__lll_lock_elision): Remove adapt_count decrement...
* sysdeps/unix/sysv/linux/powerpc/elision-trylock.c
(__lll_trylock_elision): Likewise.
* sysdeps/unix/sysv/linux/powerpc/elision-unlock.c
(__lll_unlock_elision): ... to here. And utilize
new adapt_count parameter.
* sysdeps/unix/sysv/linux/powerpc/lowlevellock.h
(__lll_unlock_elision): Update to include adapt_count
parameter.
(lll_unlock_elision): Pass pointer to adapt_count
variable.
Adding this parameter will give architectures more freedom in
how they choose to update this variable. This change has no
effect on architectures which choose not to use it.
* nptl/pthread_mutex_unlock.c(lll_unlock_elision):
Add elision adapt_count parameter to list of arguments.
* sysdeps/unix/sysv/linux/powerpc/lowlevellock.h
(lll_unlock_elision): Update with new parameter list
* sysdeps/unix/sysv/linux/s390/lowlevellock.h
(lll_unlock_elision): Likewise
* sysdeps/unix/sysv/linux/x86_64/lowlevellock.h
(lll_unlock_elision): Likewise
Power ISA 2.07B section B.5.5 relaxed the barrier requirement around a
TLE enabled lock. It is now identical to a traditional lock.
2015-08-26 Paul E. Murphy <murphyp@linux.vnet.ibm.com>
* sysdeps/unix/sysv/linux/powerpc/elision-lock.c
(__arch_compare_and_exchange_val_32_acq): Remove and use common
definition. ISA 2.07B no longer requires full sync.
Explicit system calls for the socket operations were added in Linux kernel
in commit 86250b9d12ca for powerpc. This patch make use of those instead of
calling socketcall to save number of cycles on networking syscalls.
2015-08-25 Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
* sysdeps/unix/sysv/linux/powerpc/kernel-features.h: Define new macros.
* sysdeps/unix/sysv/linux/accept.c: Call direct system call.
* sysdeps/unix/sysv/linux/bind.c: Call direct system call.
* sysdeps/unix/sysv/linux/connect.c: Call direct system call.
* sysdeps/unix/sysv/linux/getpeername.c: Call direct system call.
* sysdeps/unix/sysv/linux/getsockname.c: Call direct system call.
* sysdeps/unix/sysv/linux/getsockopt.c: Call direct system call.
* sysdeps/unix/sysv/linux/listen.c: Call direct system call.
* sysdeps/unix/sysv/linux/recv.c: Call direct system call.
* sysdeps/unix/sysv/linux/recvfrom.c: Call direct system call.
* sysdeps/unix/sysv/linux/recvmsg.c: Call direct system call.
* sysdeps/unix/sysv/linux/send.c: Call direct system call.
* sysdeps/unix/sysv/linux/sendmsg.c: Call direct system call.
* sysdeps/unix/sysv/linux/sendto.c: Call direct system call.
* sysdeps/unix/sysv/linux/setsockopt.c: Call direct system call.
* sysdeps/unix/sysv/linux/shutdown.c: Call direct system call.
* sysdeps/unix/sysv/linux/socket.c: Call direct system call.
* sysdeps/unix/sysv/linux/socketpair.c: Call direct system call.
Fix usage of tabort in generated syscalls. r0 has special meaning
when used with this instruction, thus it will not generate
persistent errors, nor return an error code. This mitigates poor
CPU usage when performing elided critical sections.
Additionally, transactions should be aborted when entering a user
invoked syscall. Otherwise the results of the transaction may be
undefined.
2015-08-25 Paul E. Murphy <murphyp@linux.vnet.ibm.com>
* sysdeps/powerpc/powerpc32/sysdep.h (ABORT_TRANSACTION): Use
register other than r0 for tabort, it has special meaning.
* sysdeps/powerpc/powerpc64/sysdep.h (ABORT_TRANSACTION): Likewise
* sysdeps/unix.sysv/linux/powerpc/syscall.S (syscall): Abort
transaction before starting syscall.
PowerPC has always used __IPC_64 like most other architectures, which
means that __ASSUME_IPC64 can be always true. Also, all other
architecture implementations that use the ipc syscall are effectively
identical to the generic version and can be removed.
This patch added a new fmemopen version, for glibc 2.22, that aims to be
POSIX complaint. It fixes some long-stading glibc fmemopen issues, such
as:
* it changes the way fseek with SEEK_END works on fmemopen to seek
relative to buffer size instead of first '\0'. This is default mode and
'b' opening mode does not change internal behavior (bz#6544).
* fix apending opening mode to use as start position either first null
byte of len specified in function call (bz#13152 and #13151).
* remove binary option 'b' and internal different handling (bz#12836)
* fix seek/SEE_END with negative values (bz#14292).
A compatibility symbol is provided to with old behavior for older symbols
version (2.2.5).
* include/stdio.h (fmemopen): Remove hidden prototype.
(__fmemopen): Add new hidden prototype.
* libio/Makefile: Add oldfmemopen object.
* libio/Versions [GLIBC_2.22]: Add new fmemopen symbol.
* libio/fmemopen.c (__fmemopen): Function rewrite to be POSIX
compliance.
* libio/oldfmemopen.c: New file: old fmemopen implementation for
symbol compatibility.
* stdio-common/Makefile [tests]: Add new tst-fmemopen3.
* stdio-common/psiginfo.c [psiginfo]: Call __fmemopen instead of
fmemopen.
* stdio-common/tst-fmemopen3.c: New file: more fmemopen tests, focus
on append and read mode.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist [GLIBC_2.22]: Add
fmemopen.
* sysdeps/unix/sysv/linux/alpha/libc.abilist [GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist [GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist [GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist [GLIBC_2.22]:
Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist [GLIBC_2.22]:
Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist [GLIBC_2.22]:
Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist [GLIBC_2.22]:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist [GLIBC_2.22]:
Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist [GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist
[GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist [GLIBC_2.22]:
Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist [GLIBC_2.22]:
Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist [GLIBC_2.22]:
Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist [GLIBC_2.22]: Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist [GLIBC_2.22]: Likewise.
This patch consolidates the sched_getcpu implementations across all
arches (except tile, which requires its own). This patch removes
the powerpc, x86_64 and x32 specific files and change the default
linux one to use INLINE_VSYSCALL where possible (for ports that
implements it).
This patch uses inline calls (through INLINE_SYSCALL macro) to define
the non-cancellable functions macros to avoid use of the
syscall_nocancel entrypoint.
The attached patch fixes a glibc build failure with gcc 5 on powerpc64le
caused by a recent change in gcc where the compiler defines the
_ARCH_PWR6 macro when processing assembly files but doesn't invoke the
assembler in the corresponding machine mode (unless it has been
explicitly configured to target POWER 6 or later). A bug had been filed
with gcc for this (65341) but was closed as won't fix. Glibc relies on
the _ARCH_PWR6 macro in a few .S files to make use of Power ISA 2.5
instructions (specifically, the four-argument form of the mtfsf insn).
A similar problem had occurred in the past (bug 10118) but the fix that
was committed for it didn't anticipate this new problem.
This patch removes the architecture specific gettimeofday implementation
to use the vDSO symbol and consolidate it on a common Linux one.
Similar to clock_gettime and clock_getres vDSO implementation, each port
that supports gettimeofday through vDSO should just implement INLINE_VSYSCALL
to access the symbol and define HAVE_{GETTIME,GETRES}_VSYSCAL as 1.
This patch consolidate the Linux vDSO define and usage across all ports
that uses it. The common vDSO definitions and calling through
{INLINE/INTERNAL}_VSYSCALL macros are moved to a common header
sysdep-vdso.h and vDSO name declaration and prototype is defined
using a common macro.
Also PTR_{MANGLE,DEMANGLE} is added to ports that does not use them
for vDSO calls (aarch64, powerpc, s390, and tile) and thus it will
reflect in code changes. For ports that already implement pointer
mangling/demangling in vDSO system (i386, x32, x86_64) this patch
is mainly a code refactor.
Checked on x32, x86_64, x32, ppc64le, and aarch64.
This patch removes the socket.S implementation for all ports and replace
it by a C implementation using socketcall. For ports that implement
the syscall directly, there is no change.
The patch idea is to simplify the socket function implementation that
uses the socketcall to be based on C implemetation instead of a pseudo
assembly implementation with arch specific parts. The patch then remove
the assembly implementatation for the ports which uses socketcall
(i386, microblaze, mips, powerpc, sparc, m68k, s390 and sh).
I have cross-build GLIBC for afore-mentioned ports and tested on both
i386 and ppc32 without regressions.
This patch is glibc support for a PowerPC TLS optimization, inspired
by Alexandre Oliva's TLS optimization for other processors,
http://www.lsd.ic.unicamp.br/~oliva/writeups/TLS/RFC-TLSDESC-x86.txt
In essence, this optimization uses a zero module id in the tls_index
GOT entry to indicate that a TLS variable is allocated space in the
static TLS area. A special plt call linker stub for __tls_get_addr
checks for such a tls_index and if found, returns the offset
immediately. The linker communicates the fact that the special
__tls_get_addr stub is used by setting a bit in the dynamic tag
DT_PPC64_OPT/DT_PPC_OPT. glibc communicates to the linker that this
optimization is available by the presence of __tls_get_addr_opt.
tst-tlsmod2.so is built with -Wl,--no-tls-get-addr-optimize for
tst-tls-dlinfo, which otherwise would fail since it tests that no
static tls is allocated. The ld option --no-tls-get-addr-optimize has
been available since binutils-2.20 so doesn't need a configure test.
* NEWS: Advertise TLS optimization.
* elf/elf.h (R_PPC_TLSGD, R_PPC_TLSLD, DT_PPC_OPT, PPC_OPT_TLS): Define.
(DT_PPC_NUM): Increment.
* elf/dynamic-link.h (HAVE_STATIC_TLS): Define.
(CHECK_STATIC_TLS): Use here.
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela): Optimize
TLS descriptors.
* sysdeps/powerpc/powerpc64/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/powerpc/dl-tls.c: New file.
* sysdeps/powerpc/Versions: Add __tls_get_addr_opt.
* sysdeps/powerpc/tst-tlsopt-powerpc.c: New tls test.
* sysdeps/unix/sysv/linux/powerpc/Makefile: Add new test.
Build tst-tlsmod2.so with --no-tls-get-addr-optimize.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/ld.abilist: Update.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/ld.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/ld-le.abilist: Likewise.
In bc0cdc498 the configure check for HAVE_ASM_PPC_REL16 was removed
on the grounds that the minimum binutils supports rel16 relocs. This
is true, but not all references to HAVE_ASM_PPC_REL16 in the sources
were removed.
* config.h.in: Remove HAVE_ASM_PPC_REL16.
* sysdeps/powerpc/powerpc32/tls-macros.h: Remove HAVE_ASM_PPC_REL16
and false branch of conditional.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/swapcontext-common.S:
Likewise.
With AIX port deprecated there is no need to check/define
HAVE_ASM_GLOBAL_DOT_NAME anymore since the current minimum binutils
supported (2.22) does not emit global symbol with dot.
This patch removes all the HAVE_ASM_GLOBAL_DOT_NAME definition and
checks for powerpc64 port.
posix_spawn (a standard POSIX function) brings in a use of getrlimit64
(not a standard POSIX function). This patch fixes this by using
__getrlimit64 and making getrlimit64 a weak alias.
This is more complicated than some such changes because of files that
define getrlimit64 in their own way using symbol versioning after
including the main sysdeps/unix/sysv/linux/getrlimit64.c with a
getrlimit macro defined. There are various existing patterns for such
cases in glibc; the one I've used here is that a getrlimit64 macro
disables the weak_alias / libc_hidden_weak calls, leaving it to the
including file to define the getrlimit64 name in whatever way is
appropriate.
Tested for x86_64 and x86 that installed stripped shared libraries are
unchanged by this patch.
[BZ #17991]
* include/sys/resource.h (__getrlimit64): Declare. Use
libc_hidden_proto.
* resource/getrlimit64.c (getrlimit64): Rename to __getrlimit64
and define as weak alias of __getrlimit64. Use libc_hidden_weak.
* sysdeps/posix/spawni.c (__spawni): Call __getrlimit64 instead of
getrlimit64.
* sysdeps/unix/sysv/linux/getrlimit64.c (getrlimit64): Rename to
__getrlimit64.
[!getrlimit64] (getrlimit64): Define as weak alias of
__getrlimit64. Use libc_hidden_weak.
* sysdeps/unix/sysv/linux/i386/getrlimit64.c (getrlimit64): Define
using __getrlimit64 not __new_getrlimit64.
(__GI_getrlimit64): Likewise.
* sysdeps/unix/sysv/linux/mips/getrlimit64.c (getrlimit64):
Likewise.
(__GI_getrlimit64): Likewise.
(__old_getrlimit64): Use __getrlimit64 not __new_getrlimit64.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/syscalls.list
(getrlimit): Add __getrlimit64 alias.
* sysdeps/unix/sysv/linux/wordsize-64/syscalls.list (getrlimit):
Likewise.
* conform/Makefile (test-xfail-XOPEN2K/spawn.h/linknamespace):
Remove variable.
(test-xfail-POSIX2008/spawn.h/linknamespace): Likewise.
(test-xfail-XOPEN2K8/spawn.h/linknamespace): Likewise.
This patch fix powerpc __get_clockfreq racy and cancel-safe issues by
dropping internal static cache and by using nocancel file operations.
The vDSO failure check is also removed, since kernel code does not
return an error (it cleans cr0.so bit on function return) and the static
code (to read value /proc) now uses non-cancellable calls.
This commit fixes semaphore destruction by either using 64b atomic
operations (where available), or by using two separate fields when only
32b atomic operations are available. In the latter case, we keep a
conservative estimate of whether there are any waiting threads in one
bit of the field that counts the number of available tokens, thus
allowing sem_post to atomically both add a token and determine whether
it needs to call futex_wake.
See:
https://sourceware.org/ml/libc-alpha/2014-12/msg00155.html
Linux kernel powerpc documentation states issuing a syscall inside a
transaction is not recommended and may lead to undefined behavior. It
also states syscalls does not abort transactoin neither they run in
transactional state.
To avoid side-effects being visible outside transactions, GLIBC with
lock elision enabled will issue a transaction abort instruction just
before all syscalls if hardware supports hardware transactions.
This patch adds support for lock elision using ISA 2.07 hardware
transactional memory for rwlocks. The logic is similar to the
one presented in pthread_mutex lock elision.
This patch adds support for lock elision using ISA 2.07 hardware
transactional memory instructions for pthread_mutex primitives.
Similar to s390 version, the for elision logic defined in
'force-elision.h' is only enabled if ENABLE_LOCK_ELISION is defined.
Also, the lock elision code should be able to be built even with
a compiler that does not provide HTM support with builtins.
However I have noted the performance is sub-optimal due scheduling
pressures.
Continuing the removal of unused __libc_* function names, this patch
removes the __libc_waitpid name.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch; __waitpid, which is exported from
shared libc, changes from weak to strong on some configurations, which
is of no significance).
* include/sys/wait.h (__libc_waitpid): Remove declaration.
* posix/waitpid.c (__libc_waitpid): Rename to __waitpid.
(__waitpid): Don't define as alias. Use libc_hidden_def not
libc_hidden_weak.
(waitpid): Define as alias of __waitpid.
* sysdeps/unix/bsd/waitpid.c (__libc_waitpid): Rename to
__waitpid.
(__waitpid): Don't define as alias. Use libc_hidden_def not
libc_hidden_weak.
(waitpid): Define as alias of __waitpid.
* sysdeps/unix/sysv/linux/i386/syscalls.list (waitpid): Remove
__libc_waitpid alias.
* sysdeps/unix/sysv/linux/m68k/syscalls.list (waitpid): Likewise.
* sysdeps/unix/sysv/linux/powerpc/syscalls.list (waitpid):
Likewise.
* sysdeps/unix/sysv/linux/sh/syscalls.list (waitpid): Likewise.
* sysdeps/unix/sysv/linux/sparc/syscalls.list (waitpid): Likewise.
* sysdeps/unix/sysv/linux/tile/waitpid.S (__libc_waitpid): Remove
alias.
* sysdeps/unix/sysv/linux/waitpid.c (__libc_waitpid): Rename to
__waitpid.
(__waitpid): Don't define as alias. Use libc_hidden_def not
libc_hidden_weak.
(waitpid): Define as alias of __waitpid.
For maximum paranoia we run ld.so through the normal set
of tests for all of the shared libraries. This includes
running ld.so through check-localplt, check-textrel, and
check-execstack. While none of these should trigger any
failures given the way ld.so is built, it might possibly
fail if a developer does something wrong. This paranoia
was triggered by a discussion over the use of __strcpy
vs. strcpy [1] and if the symbol could leak and use the
libc.so version.
The check-localplt test fails right away because localplt.data
needs updating for all arches. By default we add 6 new symbols:
__tls_get_addr, __libc_memalign, malloc, calloc, realloc and
free. Other machines like i386, power, and s390 require some
different symbol sets e.g. ___tls_get_addr vs. __tls_get_addr
for i386.
Verified for i386
Verified for x86_64
Verified for ppc32
Verified for ppc64
Verified for ppc64le
Verified for arm
Verified for aarch64
Verified for s390
Verified for s390x
Guessed for alpha
Guessed for ia64
Guessed for m68k
Guessed for microblaze
Guessed for sparc32
Guessed for sparc64
Defaults for sh
Defaults for mips
Defaults for hppa
Defaults for tile
Machine manintainers notified to double check the data
used in localplt.data.
[1] https://sourceware.org/ml/libc-alpha/2014-10/msg00548.html
Concluding the move of syscall definitions to syscalls.list, where the
removal of support for old kernel versions has made this possible,
this patch removes C definitions of pread, pread64, pwrite and
pwrite64 for powerpc64. As far as I can tell, the existing
syscalls.list definitions in
sysdeps/unix/sysv/linux/wordsize-64/syscalls.list should suffice to
produce results equivalent to what these C files do.
[BZ #14138]
* sysdeps/unix/sysv/linux/powerpc/powerpc64/pread.c: Remove file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/pread64.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/pwrite.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/pwrite64.c: Likewise.
This patch enables syscalls.list entries to specify both compat and
non-compat symbol versions for the same syscall definition, making use
of this for setrlimit / chown / lchown where the inability to specify
such aliases showed up in the course of work on bug 14138.
The change to make-syscalls.sh is minimal: adding a SHARED conditional
on the compat_symbol calls. It remains the case that if a compat
symbol version is specified, the syscall is only built for the shared
library at all if an explicit symbol version is given for a non-compat
symbol (so it's necessary to specify "lchown@@GLIBC_2.0
chown@GLIBC_2.0" rather than just "lchown chown@GLIBC_2.0"). It also
remains the case, as already commented in make-syscalls.sh, that no
SHLIB_COMPAT conditionals are generated, so there would be problems if
the same syscalls.list file, with compat symbols, were used for both
configurations that should have those symbols and configurations for
which they should be conditioned out with SHLIB_COMPAT.
Tested for x86.
* sysdeps/unix/make-syscalls.sh (emit_weak_aliases): Condition
compat_symbol calls on [SHARED].
* sysdeps/unix/sysv/linux/powerpc/lchown.S: Remove file.
* sysdeps/unix/sysv/linux/i386/syscalls.list (oldsetrlimit):
Remove.
(setrlimit): Add setrlimit@GLIBC_2.0 alias.
* sysdeps/unix/sysv/linux/m68k/m680x0/syscalls.list
(oldsetrlimit): Remove.
(setrlimit): Add setrlimit@GLIBC_2.0 alias.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list
(lchown): New syscall entry.
(oldsetrlimit): Remove.
(setrlimit): Add setrlimit@GLIBC_2.0 alias.
* sysdeps/unix/sysv/linux/s390/s390-32/syscalls.list
(oldsetrlimit): Remove.
(setrlimit): Add setrlimit@GLIBC_2.0 alias.
Continuing the move of syscall definitions to syscalls.list, where the
removal of support for old kernel versions has made this possible,
this patch moves various definitions of chown, lchown and fchown.
In most cases the need for special syscalls.list entries (rather than
existing generic ones) is because these architectures use chown32,
lchown32 and fchown32 as syscall names. Some architectures also have
symbol versioning compatibility for older versions of chown having
been equivalent to lchown.
In the case of powerpc, chown.c (providing the chown@@GLIBC_2.1
default version) is replaced by a syscalls.list entry (for powerpc32;
powerpc64 has no need for this because of its more recent minimum
symbol version, so can just use the entry in
sysdeps/unix/syscalls.list), but lchown.S is left as-is because it
provides the compat version of chown as an actual alias for __lchown,
which is not yet supported by syscalls.list. This file can be removed
once such aliases are supported in syscalls.list.
[BZ #14138]
* sysdeps/unix/sysv/linux/arm/fchown.c: Remove file.
* sysdeps/unix/sysv/linux/arm/lchown.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/fchown.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/lchown.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/chown.c: Likewise.
* sysdeps/unix/sysv/linux/arm/syscalls.list (lchown): Add syscall.
(fchown): Likewise.
* sysdeps/unix/sysv/linux/m68k/syscalls.list (lchown): Likewise.
(fchown): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list (chown):
Likewise.
When a shlib-versions file has a DEFAULT line, it's not necessary to
specify the same default minimum symbol version on the lines for
individual libraries. If those lines otherwise duplicate the default
SONAME for the library in question, they can be removed completely.
This patch makes such cleanups: version entries for ld.so are removed
(leaving just the definition of the architecture-specific dynamic
linker name) and entries for libpthread are removed completely (since
the default is libpthread.so.0).
Tested for x86_64 that the installed shared libraries are unchanged by
this patch.
There are various architectures (hppa, ia64, mips, sh, sparc64) that
define minimum symbol versions (or in the case of mips, omission of
symbol versions) only for particular libraries without a DEFAULT line.
None of these are equivalent to something simpler with a DEFAULT line
because all have some other libraries, not explicitly mentioned, with
symbol versions that would be omitted were such a line used. In the
mips case I'm pretty sure it was a mistake not to omit the 2.1 symbols
for libthread_db; for the others I don't know if it was a mistake or
deliberate that some symbols in various libraries have 2.0 or 2.1
versions despite other libraries having a 2.2 minimum.
This concludes the shlib-versions cleanups I'm aware of.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions: Do not
specify symbol version for ld.so. Do not include entry for
libpthread.
* sysdeps/unix/sysv/linux/s390/s390-64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/shlib-versions: Likewise.
This patch eliminates the mixture of SONAME information in
shlib-versions files and SONAME information used to generate
gnu/lib-names.h in makefiles, with the information in the makefiles
being removed so all this information comes from the shlib-versions
files.
So that gnu/lib-names.h supports multiple ABIs, it is changed to be
generated on the same basis as gnu/stubs.h: when there are multiple
ABIs, gnu/lib-names.h is a wrapper header (the same header installed
whatever ABI is being built) and separate headers such as
gnu/lib-names-64.h contain the substantive contents (only one such
header being installed by any glibc build).
The rules for building gnu/lib-names.h were moved from Makeconfig to
Makerules because they need to come after sysdeps makefiles are
included (now that "ifndef abi-variants" is a toplevel conditional on
the rules rather than $(abi-variants) being evaluated later inside the
commands for a rule).
Tested for x86_64 and x86 that the installed shared libraries are
unchanged by this patch, and examined the installed gnu/lib-names*.h
headers by hand. Also tested the case of a single ABI (where there is
just a single header installed, again like stubs.h) by hacking
abi-variants to empty for x86_64.
[BZ #14171]
* Makeconfig [$(build-shared) = yes]
($(common-objpfx)soversions.mk): Don't handle SONAMEs specified in
makefiles.
[$(build-shared) = yes && $(soversions.mk-done) = t]
($(common-objpfx)gnu/lib-names.h): Remove rule.
[$(build-shared) = yes && $(soversions.mk-done) = t]
($(common-objpfx)gnu/lib-names.stmp): Likewise. Split and moved
to Makerules.
[$(build-shared) = yes && $(soversions.mk-done) = t]
(before-compile): Don't append $(common-objpfx)gnu/lib-names.h
here.
[$(build-shared) = yes && $(soversions.mk-done) = t]
(common-generated): Don't append gnu/lib-names.h and
gnu/lib-names.stmp here.
* Makerules [$(build-shared) = yes && $(soversions.mk-done) = t]
(lib-names-h-abi): New variable.
[$(build-shared) = yes && $(soversions.mk-done) = t]
(lib-names-stmp-abi): Likewise.
[$(build-shared) = yes && $(soversions.mk-done) = t &&
abi-variants] (before-compile): Append
$(common-objpfx)$(lib-names-h-abi).
[$(build-shared) = yes && $(soversions.mk-done) = t &&
abi-variants] (common-generated): Append gnu/lib-names.h.
[$(build-shared) = yes && $(soversions.mk-done) = t &&
abi-variants] (install-others-nosubdir): Depend on
$(inst_includedir)/$(lib-names-h-abi).
[$(build-shared) = yes && $(soversions.mk-done) = t &&
abi-variants] ($(common-objpfx)gnu/lib-names.h): New rule.
[$(build-shared) = yes && $(soversions.mk-done) = t]
($(common-objpfx)$(lib-names-h-abi)): New rule.
[$(build-shared) = yes && $(soversions.mk-done) = t]
($(common-objpfx)$(lib-names-stmp-abi)): Likewise.
[$(build-shared) = yes && $(soversions.mk-done) = t]
(common-generated): Append $(lib-names-h-abi) and
$(lib-names-stmp-abi).
* scripts/lib-names.awk: Do not handle multi being set.
* sysdeps/unix/sysv/linux/aarch64/Makefile (abi-lp64-ld-soname):
Remove variable.
(abi-lp64_be-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/arm/Makefile (abi-soft-ld-soname):
Likewise.
(abi-hard-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/i386/shlib-versions: New file.
* sysdeps/unix/sysv/linux/mips/Makefile (abi-o32_soft-ld-soname):
Remove variable.
(abi-o32_hard-ld-soname): Likewise.
(abi-o32_soft_2008-ld-soname): Likewise.
(abi-o32_hard_2008-ld-soname): Likewise.
(abi-n32_soft-ld-soname): Likewise.
(abi-n32_hard-ld-soname): Likewise.
(abi-n32_soft_2008-ld-soname): Likewise.
(abi-n32_hard_2008-ld-soname): Likewise.
(abi-n64_soft-ld-soname): Likewise.
(abi-n64_hard-ld-soname): Likewise.
(abi-n64_soft_2008-ld-soname): Likewise.
(abi-n64_hard_2008-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/powerpc/Makefile (abi-64-v1-ld-soname):
Likewise.
(abi-64-v2-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions: Add
ld.so entries.
* sysdeps/unix/sysv/linux/s390/Makefile (abi-64-ld-soname): Remove
variable.
* sysdeps/unix/sysv/linux/s390/s390-64/shlib-versions: Add ld.so
entry.
* sysdeps/unix/sysv/linux/x86/Makefile (abi-32-ld-soname): Remove
variable.
(abi-64-ld-soname): Likewise.
(abi-x32-ld-soname): Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/shlib-versions: Add ld.so
entry.
* sysdeps/unix/sysv/linux/x86_64/x32/shlib-versions: Likewise.
Bug 14138 is followup cleanup after removal of support for old Linux
kernel versions: moving syscalls to syscalls.list where the only
reason for using C definitions was kernel version conditionals that
are no longer present.
This patch deals with the case of setrlimit
(sysdeps/unix/sysv/linux/i386/setrlimit.c, included by various other
architectures). Where needed (where there is also a compat symbol for
setrlimit@GLIBC_2.0), new syscalls.list entries are added. Where not
needed (where there is no such compat symbol and the minimum symbol
version for libc is 2.2 or later), no such entries are added as that
in sysdeps/unix/syscalls.list will suffice. Thus arm and sh need no
such entries, while m68k and powerpc need entries only in a
subdirectory syscalls.list file rather than for all configurations
that previously used setrlimit.c.
(setrlimit@@GLIBC_2.2 and setrlimit@GLIBC_2.0 are now semantically
identical - the new symbol version was about a change of types from
signed to unsigned and the former compatibility code for dealing with
large unsigned arguments on old kernels is no longer needed or
present, having been removed with support for pre-2.4 kernels.
However, making the two versions into aliases doesn't work at present:
the case of having both default and non-default symbol versions on the
same syscalls.list line results in a compat_symbol call in code built
for static libc, which doesn't compile. I don't suppose it would be
hard to generate SHARED conditionals from make-syscalls.sh to fix
this, but in any case this patch doesn't make things any worse, as the
functions weren't aliases before the patch either.)
Tested for x86, and ran ABI tests for ARM as an example of an
architecture where the setrlimit.c file was just removed without
adding syscalls.list entries.
[BZ #14138]
* sysdeps/unix/sysv/linux/arm/setrlimit.c: Remove file.
* sysdeps/unix/sysv/linux/i386/setrlimit.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/setrlimit.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/setrlimit.c: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/setrlimit.c: Likewise.
* sysdeps/unix/sysv/linux/sh/setrlimit.c: Likewise.
* sysdeps/unix/sysv/linux/i386/syscalls.list (setrlimit): Add
syscall entry for GLIBC_2.2 symbol version.
* sysdeps/unix/sysv/linux/m68k/m680x0/syscalls.list (setrlimit):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list
(setrlimit): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/syscalls.list (setrlimit):
Likewise.
This patch removes the first column (patterns matching configuration
names) from shlib-versions, leaving shlib-versions entry selection
based purely on sysdeps directories.
An implication of this removal is that the default for any non-Linux
ports using NPTL will be the same SONAMEs for NPTL libraries as for
Linux (as those defaults, previously limited to .*-.*-linux.*, are
left in nptl/shlib-versions and nptl_db/shlib-versions).
Special host_os handling in configure.ac that was purely for
shlib-versions is removed. (The host_os setting is still used for
libc-abis - see
<https://sourceware.org/ml/libc-alpha/2014-01/msg00375.html> regarding
that - but no entries there are affected by this change.)
Tested on x86_64 and x86 that the installed shared libraries are
unchanged by this patch.
* scripts/soversions.awk: Do not handle configuration names.
* Makeconfig ($(common-objpfx)soversions.i): Do not pass cpu,
vendor and os variables to soversions.awk.
* configure.ac: Do not modify gnu-* host_os.
* configure: Regenerated
* shlib-versions: Remove first column with configuration names.
* nptl/shlib-versions: Likewise.
* nptl_db/shlib-versions: Likewise.
* sysdeps/hppa/shlib-versions: Likewise.
* sysdeps/m68k/shlib-versions: Likewise.
* sysdeps/mach/hurd/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/aarch64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/alpha/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/arm/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/hppa/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/ia64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/microblaze/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/mips/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/sh/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/tile/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/shlib-versions: Likewise.
libidn/ChangeLog:
* shlib-versions: Remove first column with configuration names.
This patch makes
sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions use %ifdef
conditionals around the different symbol version definitions for big
and little endian. (It doesn't actually change the host patterns used
for those definitions; the point is to make it possible to remove the
first column from shlib-versions by eliminating the last case where it
would be harmful for it to be treated as .*-.*-.*.) The conditional
is based on the ELFv1/ELFv2 distinction rather than BE/LE, since
that's what's already tested in configure and used for the ld.so
soname in the Makefiles. (Of course if BE ELFv2 were supported in
future, it would get new symbol versions and so need new
conditionals.)
* sysdeps/unix/sysv/linux/powerpc/powerpc64/configure.ac
(HAVE_ELFV2_ABI): AC_DEFINE in ELFv2 case.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/configure:
Regenerated.
* config.h.in (HAVE_ELFV2_ABI): New macro undefine.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions:
Condition symbol version definitions on [HAVE_ELFV2_ABI].
This patch eliminates another way in which ex-ports and non-ex-ports
architectures differ, by moving architecture-specific entries from the
top-level shlib-versions file and that in nptl/ to appropriate sysdeps
directories. As with my previous patch
<https://sourceware.org/ml/libc-alpha/2014-06/msg00949.html>, I do not
change the regular expressions used; even where the present
expressions seem more general, I believe they are in fact specific to
the chosen sysdeps directory, because any port that matches the
expression but not the sysdeps directory does not currently exist, and
so would use different symbol versions if added in future (and an
intended goal of these changes is to eliminate the first column in
shlib-versions completely rather than having two different mechanisms
in use for system-specific configuration).
Tested on x86_64 that this does not change the installed shared
libraries. (x86_64 of course does not provide much test coverage for
this patch - what should be architecture-specific contents in
shlib-versions for x86_64 is currently abi-*-ld-soname Makefile
settings, until gnu/lib-names.h is generated more like gnu/stubs.h so
those can move back to shlib-versions.)
* nptl/shlib-versions: Remove architecture-specific entries.
Moved to files in sysdeps.
* shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions: New
file.
* sysdeps/unix/sysv/linux/s390/s390-64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/sh/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/shlib-versions: Likewise.
In my powerpc32 testing I've observed misc/test-gettimebasefreq
failing.
This is a glibc build (soft-float, though that's not relevant here)
without any --with-cpu and without any special configuration of the
default CPU for GCC either. In particular, it's one not using
sysdeps/powerpc/powerpc32/power4/hp-timing.h (although in fact the
processor I'm using for testing is POWER4-based), so hp_timing_t is
32-bit not 64-bit. But the VDSO call being used by
INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK is generating a 64-bit result
(high part in r3, low part in r4). The code extracting that result,
however, expects a result of the type hp_timing_t as passed to
INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK, meaning that only r3 (= 0) is
used and the value in r4 is ignored. This patch fixes this by always
using uint64_t as the type in INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK -
reflecting the actual ABI (unconditional in the kernel) of that VDSO
call. This is the minimal change for this issue - no check for
overflow, no change of the type of the timebase_freq variable or the
return type of __get_clockfreq to something other than hp_timing_t
(such a change would simply move the implicit conversions to the over
callers of that function), no change to hp_timing_t itself.
Tested for powerpc32 soft float.
[BZ #17263]
* sysdeps/unix/sysv/linux/powerpc/get_clockfreq.c: Include
<stdint.h>.
(__get_clockfreq): Use uint64_t instead of hp_timing_t in
INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK call.
This patch fixes the incorrect guard by __USE_MISC of struct winsize and
struct termio in powerpc termios header. Current states leads to build
failures if the program defines _XOPEN_SOURCE, but not _DEFAULT_SOURCE
or either _BSD_SOURCE or _SVID_SOURCE. Without any definition,
__USE_MISC will not be defined and neither the struct definitions.
This patch copies the default Linux ioctl-types.h by adjusting only the
character control field (c_cc) size in struct termio.
This patch splits powerpc out of the main Linux kernel-features.h.
Not tested.
* sysdeps/unix/sysv/linux/powerpc/kernel-features.h: New file.
* sysdeps/unix/sysv/linux/kernel-features.h [__powerpc__]
(__ASSUME_SOCKETCALL): Do not define.
(__ASSUME_IPC64): Define unconditionally.
[__LINUX_KERNEL_VERSION >= 0x020625 && __powerpc__]
(__ASSUME_ACCEPT4_SYSCALL): Do not define.
[__LINUX_KERNEL_VERSION >= 0x020625 && __powerpc__]
(__ASSUME_RECVMMSG_SYSCALL): Likewise.
[__LINUX_KERNEL_VERSION >= 0x030000 && __powerpc__]
(__ASSUME_SENDMMSG_SYSCALL): Likewise.
[__powerpc__] (__ASSUME_SENDMMSG_SYSCALL_WITH_SOCKETCALL):
Likewise.
This patch continues removing architecture-specific cases from
non-architecture-specific files by moving the logic to use directories
such as /lib64 out of sysdeps/gnu/configure.ac.
A new macro LIBC_SLIBDIR_RTLDDIR is created that sysdeps configure
scripts can use to declare the library directories to be used; the
logic was previously duplicated in configure fragments for aarch64,
mips and x32 as well as in sysdeps/gnu/configure.ac. This macro is
used directly in sysdeps/gnu/configure.ac only to provide the /lib
default (the logic saying that with --prefix=/usr shared libraries go
in /lib not /usr/lib); the architecture cases formerly there are moved
into various new or existing configure.ac files. The new macro is
also used in the various architecture fragments that already had such
logic. In the x32 there was previously a configure fragment, but it
was a directly written one without a .ac file; now a .ac file is used
there instead to generate configure.
Tested x86_64 that the installed shared libraries, and the directory
structure of the installation, are unchanged by this patch.
There is an old bug report - bug 6441 - about library directories
changing after reconfiguring. If this is still applicable - and I
haven't attempted to confirm it or review the old patch pointed to in
that bug - then this patch should reduce the number of places needing
changing in any fix.
* aclocal.m4 (LIBC_SLIBDIR_RTLDDIR): New macro.
* sysdeps/gnu/configure.ac: Use LIBC_SLIBDIR_RTLDDIR. Remove
cases for individual architectures.
* sysdeps/gnu/configure: Regenerated.
* sysdeps/unix/sysv/linux/aarch64/configure.ac: Use
LIBC_SLIBDIR_RTLDDIR.
* sysdeps/unix/sysv/linux/aarch64/configure: Regenerated.
* sysdeps/unix/sysv/linux/mips/configure.ac: Use
LIBC_SLIBDIR_RTLDDIR.
* sysdeps/unix/sysv/linux/mips/configure: Regenerated.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/configure.ac: Use
LIBC_SLIBDIR_RTLDDIR.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/configure:
Regenerated.
* sysdeps/unix/sysv/linux/s390/s390-64/configure.ac: New file.
* sysdeps/unix/sysv/linux/s390/s390-64/configure: New generated
file.
* sysdeps/unix/sysv/linux/sparc/sparc64/configure.ac: New file.
* sysdeps/unix/sysv/linux/sparc/sparc64/configure: New generated
file.
* sysdeps/unix/sysv/linux/x86_64/64/configure.ac: New file.
* sysdeps/unix/sysv/linux/x86_64/64/configure: New generated file.
* sysdeps/unix/sysv/linux/x86_64/x32/configure.ac: New file.
* sysdeps/unix/sysv/linux/x86_64/x32/configure: Generate.
Commit 887865f remove the lll_robust_trylock definition on all
architectures, however for powerpc both __lll_trylock and
__lll_cond_trylock were based on lll_robust_trylock definition.
This patch restore it with a different name.
Continuing the process of making non-ex-ports architectures follow the
preferred sysdeps practices followed by ex-ports architectures - that
is, putting things in architecture-specific sysdeps files rather than
having architecture-specific cases in architecture-independent files -
this patch moves architecture cases out of
sysdeps/unix/sysv/linux/configure.ac into (new or existing) configure
fragments for each architecture. (In the case of the
arch_minimum_kernel setting for x32,
sysdeps/unix/sysv/linux/x86_64/x32/configure already has such a
setting so the setting in sysdeps/unix/sysv/linux/configure.ac was a
duplicate that could just be removed - though I haven't tested for
x32.)
Tested for x86_64 and x86 that the patch causes no changes to the
installed shared libraries or ldd (or any part of the installation
except for the parts that always change because the files contain
timestamps - nscd and static libraries).
* sysdeps/unix/sysv/linux/configure.ac: Remove cases for
individual architectures.
* sysdeps/unix/sysv/linux/configure: Regenerated.
* sysdeps/unix/sysv/linux/i386/configure.ac: New file.
* sysdeps/unix/sysv/linux/i386/configure: New generated file.
* sysdeps/unix/sysv/linux/powerpc/configure.ac
(ldd_rewrite_script): Define variable.
* sysdeps/unix/sysv/linux/powerpc/configure: Regenerated.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/configure.ac: New
file.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/configure: New
generated file.
* sysdeps/unix/sysv/linux/s390/configure.ac: New file.
* sysdeps/unix/sysv/linux/s390/configure: New generated file.
* sysdeps/unix/sysv/linux/sh/configure.ac: New file.
* sysdeps/unix/sysv/linux/sh/configure: New generated file.
* sysdeps/unix/sysv/linux/sparc/configure.ac: New file.
* sysdeps/unix/sysv/linux/sparc/configure: New generated file.
* sysdeps/unix/sysv/linux/x86_64/configure.ac: New file.
* sysdeps/unix/sysv/linux/x86_64/configure: New generated file.
This patch cleans up for __ASSUME_ATFCTS now always being true for the
supported Linux kernel versions by removing conditional code in
sysdeps/unix/sysv/linux. Several fchownat.c files that were only
present because of differences in the fallback syscalls used
(depending on the architecture-specific names of chown-related
syscalls for 32-bit uids) are removed. Files that looks like they
could be replaced by syscalls.list entries have the standard "Consider
moving to syscalls.list." comment (see bug 14138) added. Conditionals
on the relevant __NR_* syscall numbers being defined are also removed,
since my analysis indicated that the relevant syscalls are always
defined for all relevant kernel versions using any affected file.
Much of the removed fallback code had unbounded stack allocations, so
this reduces the number of cases to consider for anyone reviewing uses
of alloca and VLAs in glibc.
There remain tests of __ASSUME_ATFCTS in io/openat.c (to determine
whether to define __have_atfcts) and sysdeps/posix/getcwd.c (which
also uses __have_atfcts); thus, the definition of __ASSUME_ATFCTS
remains in kernel-features.h. The logical condition relevant there is
whether openat64_not_cancel_3 is known to work. Hurd doesn't use this
version of getcwd at all, so the conditionals in getcwd.c are always
true in glibc. However, this code is also used in gnulib. So the
best way to deal with the conditionals there may be for gnulib people
to deal with merging all relevant changes in both directions between
the glibc and gnulib versions of this file, at the end of which the
openat conditionals should be in whatever form is best for gnulib, and
hardcoded in the _LIBC case to having openat supported.
Tested by comparing before-and-after disassembly of installed
(stripped) shared libraries, on x86_64 and x86. On x86 the patch made
no change to the disassembly; on x86_64, the only changes were in
readlinkat, where formerly the return value from the readlinkat
syscall was stored in an int variable before being converted to
ssize_t for the return, and now the return value is returned directly
without truncation to int. I think it's clearly correct not to
truncate the return value (although I also think the truncation would
not have been a user-visible bug because the kernel would never have
returned a value it could have affected).
* include/fcntl.h (__atfct_seterrno): Remove prototype.
(__atfct_seterrno_2): Likewise.
* sysdeps/unix/sysv/linux/alpha/dl-fxstatat64.c: Do not include
<kernel-features.h>.
(__ASSUME_ATFCTS): Do not undefine and redefine.
* sysdeps/unix/sysv/linux/alpha/fxstatat.c [__ASSUME_ATFCTS]
(__have_atfcts): Remove conditional definition.
(__fxstatat([__NR_fstatat64]: Make code unconditional.
(__fxstatat) [!__ASSUME_ATFCTS]: Remove conditional code and code
unreachable if [__ASSUME_ATFCTS].
* sysdeps/unix/sysv/linux/dl-fxstatat64.c (__ASSUME_ATFCTS): Do
not undefine and redefine.
* sysdeps/unix/sysv/linux/faccessat.c: Do not include
<kernel-features.h>.
(faccessat) [__NR_faccessat]: Make code unconditional.
(faccessat) [!__ASSUME_ATFCTS]: Remove conditional code.
* sysdeps/unix/sysv/linux/fchmodat.c: Do not include
<kernel-features.h>.
(fchmodat) [__NR_fchmodat]: Make code unconditional.
(fchmodat) [!__ASSUME_ATFCTS]: Remove conditional code.
* sysdeps/unix/sysv/linux/fchownat.c: Do not include
<kernel-features.h>.
(fchownat) [__NR_fchownat]: Make code unconditional.
(fchownat) [!__ASSUME_ATFCTS]: Remove conditional code.
* sysdeps/unix/sysv/linux/futimesat.c: Do not include
<kernel-features.h>.
(futimesat) [__NR_futimesat]: Make code unconditional.
(futimesat) [!__ASSUME_ATFCTS]: Remove conditional code.
* sysdeps/unix/sysv/linux/fxstatat.c: Do not include
<kernel-features.h>.
(__fxstatat) [__NR_newfstatat]: Make code unconditional.
(__fxstatat) [!__ASSUME_ATFCTS]: Remove conditional code.
* sysdeps/unix/sysv/linux/fxstatat64.c: Do not include
<kernel-features.h>.
(__fxstatat64) [__NR_fstatat64]: Make code unconditional.
(__fxstatat64) [!__ASSUME_ATFCTS]: Remove conditional code.
* sysdeps/unix/sysv/linux/i386/fchownat.c: Remove file.
* sysdeps/unix/sysv/linux/i386/fxstatat.c: Do not include
<kernel-features.h>.
(__fxstatat) [__NR_fstatat64]: Make code unconditional.
(__fxstatat) [!__ASSUME_ATFCTS]: Remove conditional code.
* sysdeps/unix/sysv/linux/linkat.c: Do not include
<kernel-features.h>.
(linkat) [__NR_linkat]: Make code unconditional.
(linkat) [!__ASSUME_ATFCTS]: Remove conditional code.
* sysdeps/unix/sysv/linux/m68k/fchownat.c: Remove file.
* sysdeps/unix/sysv/linux/mips/mips64/fxstatat64.c: Do not include
<kernel-features.h>.
(__fxstatat64) [__NR_newfstatat]: Make code unconditional.
(__fxstatat64) [!__ASSUME_ATFCTS]: Remove conditional code.
* sysdeps/unix/sysv/linux/mkdirat.c: Do not include
<kernel-features.h>.
(mkdirat) [__NR_mkdirat]: Make code unconditional.
(mkdirat) [!__ASSUME_ATFCTS]: Remove conditional code.
* sysdeps/unix/sysv/linux/openat.c: Do not include
<kernel-features.h>.
[!__ASSUME_ATFCTS] (__atfct_seterrno): Remove function.
[!__ASSUME_ATFCTS] (__have_atfcts): Remove variable.
(OPENAT_NOT_CANCEL) [__NR_openat]: Make code unconditional.
(OPENAT_NOT_CANCEL) [!__ASSUME_ATFCTS]: Remove conditional code.
* sysdeps/unix/sysv/linux/powerpc/fchownat.c: Remove file.
* sysdeps/unix/sysv/linux/readlinkat.c: Do not include
<kernel-features.h>.
(readlinkat) [__NR_readlinkat]: Make code unconditional.
(readlinkat) [!__ASSUME_ATFCTS]: Remove conditional code. Return
result of INLINE_SYSCALL directly, not via int variable.
* sysdeps/unix/sysv/linux/renameat.c: Do not include
<kernel-features.h>.
[!__ASSUME_ATFCTS] (__atfct_seterrno_2): Remove function.
(renameat) [__NR_renameat]: Make code unconditional.
(renameat) [!__ASSUME_ATFCTS]: Remove conditional code.
* sysdeps/unix/sysv/linux/s390/s390-32/fchownat.c: Remove file.
* sysdeps/unix/sysv/linux/sh/fchownat.c: Remove file.
* sysdeps/unix/sysv/linux/sparc/sparc32/fchownat.c: Remove file.
* sysdeps/unix/sysv/linux/sparc/sparc64/dl-fxstatat64.c
(__ASSUME_ATFCTS): Do not undefine and redefine.
* sysdeps/unix/sysv/linux/symlinkat.c: Do not include
<kernel-features.h>.
(symlinkat) [__NR_symlinkat]: Make code unconditional.
(symlinkat) [!__ASSUME_ATFCTS]: Remove conditional code.
* sysdeps/unix/sysv/linux/unlinkat.c: Do not include
<kernel-features.h>.
(unlinkat) [__NR_unlinkat]: Make code unconditional.
(unlinkat) [!__ASSUME_ATFCTS]: Remove conditional code.
* sysdeps/unix/sysv/linux/wordsize-64/dl-fxstatat64.c
(__ASSUME_ATFCTS): Do not undefine and redefine.
* sysdeps/unix/sysv/linux/wordsize-64/fxstatat.c: Do not include
<kernel-features.h>.
(__fxstatat) [__NR_newfstatat]: Make code unconditional.
(__fxstatat) [!__ASSUME_ATFCTS]: Remove conditional code.
* sysdeps/unix/sysv/linux/xmknodat.c: Do not include
<kernel-features.h>.
(__xmknodat) [__NR_mknodat]: Make code unconditional.
(__xmknodat) [!__ASSUME_ATFCTS]: Remove conditional code.
This patch relies on the C version of the rwlocks posted earlier.
With C rwlocks it is very straight forward to do adaptive elision
using TSX. It is based on the infrastructure added earlier
for mutexes, but uses its own elision macros. The macros
are fairly general purpose and could be used for other
elision purposes too.
This version is much cleaner than the earlier assembler based
version, and in particular implements adaptation which makes
it safer.
I changed the behavior slightly to not require any changes
in the test suite and fully conform to all expected
behaviors (generally at the cost of not eliding in
various situations). In particular this means the timedlock
variants are not elided. Nested trylock aborts.
This patch guard the BSD definition for terminal modes in PowerPC
specific header fixing the following conformance failures:
FAIL: conform/POSIX/termios.h/conform
FAIL: conform/POSIX2008/termios.h/conform
FAIL: conform/UNIX98/termios.h/conform
This patch makes the configure adds -D_CALL_ELF=1 when compiler does
not define _CALL_ELF (versions before powerpc64le support). It cleans
up compiler warnings on old compiler where _CALL_ELF is not defined
on powerpc64(be) builds.
It does by add a new config.make variable for configure-deduced
CPPFLAGS and accumulate into that (confix-extra-cppflags). It also
generalizes libc_extra_cflags so it accumulates in sysdeps configure
fragmenets.
The IFUNC selector for gettimeofday runs before _libc_vdso_platform_setup where
__vdso_gettimeofday is set. The selector then sets __gettimeofday (the internal
version used within GLIBC) to use the system call version instead of the vDSO one.
This patch changes the check if vDSO is available to get its value directly
instead of rely on __vdso_gettimeofday.
This patch changes it by getting the vDSO value directly.
It fixes BZ#16431.
This patches fixes BZ#16430 by setting a different symbol for internal
GLIBC calls that points to ifunc resolvers. For PPC32, if the symbol
is defined as hidden (which is the case for gettimeofday and time) the
compiler will create local branches (symbol@local) and linker will not
create PLT calls (required for IFUNC). This will leads to internal symbol
calling the IFUNC resolver instead of the resolved symbol.
For PPC64 this behavior does not occur because a call to a function in
another translation unit might use a different toc pointer thus requiring
a PLT call.
All the other ptrace structures in this file have a __ prefix except this
new one. This in turn causes build problems for most packages that try to
use ptrace such as strace:
gcc -DHAVE_CONFIG_H -I. -I../.. -I../../linux/x86_64 -I../../linux \
-I./linux -Wall -Wwrite-strings -g -O2 -MT process.o -MD -MP \
-MF .deps/process.Tpo -c -o process.o ../../process.c
In file included from ../../process.c:63:0:
/usr/include/linux/ptrace.h:58:8: error: redefinition of 'struct ptrace_peeksiginfo_args'
struct ptrace_peeksiginfo_args {
^
In file included from ../../defs.h:159:0,
from ../../process.c:37:
/usr/include/sys/ptrace.h:191:8: note: originally defined here
struct ptrace_peeksiginfo_args
^
Since this struct was introduced in glibc-2.18, there shouldn't be any
real regressions with adding the __ prefix.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
My recent changes that added libm_hidden_proto / libm_hidden_def for
fegetround had the side effect of removing the need for a
localplt.data entry for fegetround for powerpc-nofpu. This patch
removes that entry. Tested powerpc-nofpu.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/nptl/localplt.data:
Don't expect fegetround reference in libm.so.
This patch add static probes for setjmp/longjmp in the way gdb expects,fixing
the gdb.base/longjmp.exp gdb testcases.
It changes the symbol_name and use macros to to avoid change the probe names
and ending up adding more logic on GDB (since with the expected name
GDB work seamlessly).
To avoid having a ELFv2 binary accidentally picking up an old ABI ld.so,
this patch bumps the soname to ld64.so.2.
In theory (or for testing purposes) this will also allow co-installing
ld.so versions for both ABIs on the same system. Note that the kernel
will already be able to load executables of both ABIs. However, there
is currently no plan to use that theoretical possibility in a any
supported distribution environment ...
Note that in order to check which ABI to use, we need to invoke the
compiler to check the _CALL_ELF macro; this is done in a new configure
check in sysdeps/unix/sysv/linux/powerpc/powerpc64/configure.ac,
replacing the hard-coded value of default-abi in the Makefile.
This updates glibc for the changes in the ELFv2 relating to the
stack frame layout. These are described in more detail here:
http://gcc.gnu.org/ml/gcc-patches/2013-11/msg01149.htmlhttp://gcc.gnu.org/ml/gcc-patches/2013-11/msg01146.html
Specifically, the "compiler and linker doublewords" were removed,
which has the effect that the save slot for the TOC register is
now at offset 24 rather than 40 to the stack pointer.
In addition, a function may now no longer necessarily assume that
its caller has set up a 64-byte register save area its use.
To address the first change, the patch goes through all assembler
files and replaces immediate offsets in instructions accessing the
ABI-defined stack slots by symbolic offsets. Those already were
defined in ucontext_i.sym and used in some of the context routines,
but that doesn't really seem like the right place for those defines.
The patch instead defines those symbolic offsets in sysdeps.h,
in two variants for the old and new ABI, and uses them systematically
in all assembler files, not just the context routines.
The second change only affected a few assembler files that used
the save area to temporarily store some registers. In those
cases where this happens within a leaf function, this patch
changes the code to store those registers to the "red zone"
below the stack pointer. Otherwise, the functions already allocate
a stack frame, and the patch changes them to add extra space in
these frames as temporary space for the ELFv2 ABI.
This patch adds support for the ELFv2 ABI feature to remove function
descriptors. See this GCC patch for in-depth discussion:
http://gcc.gnu.org/ml/gcc-patches/2013-11/msg01141.html
This mostly involves two types of changes: updating assembler source
files to the new logic, and updating the dynamic loader.
After the refactoring in the previous patch, most of the assembler source
changes can be handled simply by providing ELFv2 versions of the
macros in sysdep.h. One somewhat non-obvious change is in __GI__setjmp:
this used to "fall through" to the immediately following __setjmp ENTRY
point. This is no longer safe in the ELFv2 since ENTRY defines both
a global and a local entry point, and you cannot simply fall through
to a global entry point as it requires r12 to be set up.
Also, makecontext needs to be updated to set up registers according to
the new ABI for calling into the context's start routine.
The dynamic linker changes mostly consist of removing special code
to handle function descriptors. We also need to support the new PLT
and glink format used by the the ELFv2 linker, see:
https://sourceware.org/ml/binutils/2013-10/msg00376.html
In addition, the dynamic linker now verifies that the dynamic libraries
it loads match its own ABI.
The hack in VDSO_IFUNC_RET to "synthesize" a function descriptor
for vDSO routines is also no longer necessary for ELFv2.
This is the first patch to support the new ELFv2 ABI in glibc.
As preparation, this patch simply refactors some of the powerpc64 assembler
code to move all code related to creating function descriptors (.opd section)
or using function descriptors (function pointer call) into a central place
in sysdep.h.
Note that most locations creating .opd entries were already using macros
in sysdep.h, this patch simply extends this to the remaining places.
No relevant change in generated code expected.
The context established by "makecontext" has a link register pointing
back to an error path within the makecontext routine. This is currently
covered by the CFI FDE for makecontext itself, which is simply wrong
for the stack frame *inside* the context. When trying to unwind (e.g.
doing a backtrace) in a routine inside a context created by makecontext,
this can lead to uninitialized stack slots being accessed, causing the
unwinder to crash in the worst case.
Similarly, during parts of the "setcontext" routine, when the stack
pointer has already been switched to point to the new context, the
address range is still covered by the CFI FDE for setcontext. When
trying to unwind in that situation (e.g. backtrace from an async
signal handler for profiling), it is again possible that the unwinder
crashes.
Theses are all problems in existing code, but the changes in stack
frame layout appear to make the "worst case" much more likely in
the ELFv2 ABI context. This causes regressions e.g. in the libgo
testsuite on ELFv2.
This patch fixes this by ending the makecontext/setcontext FDEs
before those problematic parts of the assembler, similar to what
is already done on other platforms. This fixes the libgo
regression on ELFv2.
This patch fixes the vDSO symbol used directed in IFUNC resolver where
they do not have an associated ODP entry leading to undefined behavior
in some cases. It adds an artificial OPD static entry to such cases
and set its TOC to non 0 to avoid triggering lazy resolutions.
Autoconf has been deprecating configure.in for quite a long time.
Rename all our configure.in and preconfigure.in files to .ac.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
http://sourceware.org/ml/libc-alpha/2013-08/msg00093.html
This copies the sparc version of sigstack.h, which gives powerpc
#define MINSIGSTKSZ 4096
#define SIGSTKSZ 16384
Before the VSX changes, struct rt_sigframe size was 1920 plus 128 for
__SIGNAL_FRAMESIZE giving ppc64 exactly the default MINSIGSTKSZ of
2048.
After VSX, ucontext increased by 256 bytes. Oops, we're over
MINSIGSTKSZ, so powerpc has been using the wrong value for quite a
while. Add another ucontext for TM and rt_sigframe is now at 3872,
giving actual MINSIGSTKSZ of 4000.
The glibc testcase that I was looking at was tst-cancel21, which
allocates 2*SIGSTKSZ (not because the test is trying to be
conservative, but because the test actually has nested signal stack
frames). We blew the allocation by 48 bytes when using current
mainline gcc to compile glibc (le ppc64).
The required stack depth in _dl_lookup_symbol_x from the top of the
next signal frame was 10944 bytes. I guess you'd want to add 288 to
that, implying an actual SIGSTKSZ of 11232.
* sysdeps/unix/sysv/linux/powerpc/bits/sigstack.h: New file.
http://sourceware.org/ml/libc-alpha/2013-08/msg00092.html
Use conditional form of branch and link to avoid destroying the cpu
link stack used to predict blr return addresses.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/makecontext.S: Use
conditional form of branch and link when obtaining pc.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/makecontext.S: Likewise.
http://sourceware.org/ml/libc-alpha/2013-08/msg00091.html
More LE support, correcting word accesses to _dl_hwcap.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/getcontext-common.S: Use
HIWORD/LOWORD.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/setcontext-common.S: Ditto.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/swapcontext-common.S: Ditto.
