If building on a subset of architectures only, it is easy to miss
wrapper headers which are required by other architectures because
they lack the corresponding sysdeps header. The check ensures
that every installed header which is not itself a sysdeps header
has a header under include/ (that presumably wraps the header,
and perhaps also adding declarations and definitions for !_ISOMAC).
Also check for the absence of the sysdeps/generic/bits directory
removed in commit c72565e5f1, to make
accidental re-introduction more difficult.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch makes Python 3.4 or later a required tool for building
glibc, so allowing changes of awk, perl etc. code used in the build
and test to Python code without any such changes needing makefile
conditionals or to handle older Python versions.
This patch makes the configure test for Python check the version and
give an error if Python is missing or too old, and removes makefile
conditionals that are no longer needed. It does not itself convert
any code from another language to Python, and does not remove any
compatibility with older Python versions from existing scripts.
Tested for x86_64.
* configure.ac (PYTHON_PROG): Use AC_CHECK_PROG_VER. Set
critic_missing for versions before 3.4.
* configure: Regenerated.
* manual/install.texi (Tools for Compilation): Document
requirement for Python to build glibc.
* INSTALL: Regenerated.
* Rules [PYTHON]: Make code unconditional.
* benchtests/Makefile [PYTHON]: Likewise.
* conform/Makefile [PYTHON]: Likewise.
* manual/Makefile [PYTHON]: Likewise.
* math/Makefile [PYTHON]: Likewise.
This patch adds a new build module called 'testsuite'.
IS_IN (testsuite) implies _ISOMAC, as do IS_IN_build and __cplusplus
(which means several ad-hoc tests for __cplusplus can go away).
libc-symbols.h now suppresses almost all of *itself* when _ISOMAC is
defined; in particular, _ISOMAC mode does not get config.h
automatically anymore.
There are still quite a few tests that need to see internal gunk of
one variety or another. For them, we now have 'tests-internal' and
'test-internal-extras'; files in this category will still be compiled
with MODULE_NAME=nonlib, and everything proceeds as it always has.
The bulk of this patch is moving tests from 'tests' to
'tests-internal'. There is also 'tests-static-internal', which has
the same effect on files in 'tests-static', and 'modules-names-tests',
which has the *inverse* effect on files in 'modules-names' (it's
inverted because most of the things in modules-names are *not* tests).
For both of these, the file must appear in *both* the new variable and
the old one.
There is also now a special case for when libc-symbols.h is included
without MODULE_NAME being defined at all. (This happens during the
creation of libc-modules.h, and also when preprocessing Versions
files.) When this happens, IS_IN is set to be always false and
_ISOMAC is *not* defined, which was the status quo, but now it's
explicit.
The remaining changes to C source files in this patch seemed likely to
cause problems in the absence of the main change. They should be
relatively self-explanatory. In a few cases I duplicated a definition
from an internal header rather than move the test to tests-internal;
this was a judgement call each time and I'm happy to change those
however reviewers feel is more appropriate.
* Makerules: New subdir configuration variables 'tests-internal'
and 'test-internal-extras'. Test files in these categories will
still be compiled with MODULE_NAME=nonlib. Test files in the
existing categories (tests, xtests, test-srcs, test-extras) are
now compiled with MODULE_NAME=testsuite.
New subdir configuration variable 'modules-names-tests'. Files
which are in both 'modules-names' and 'modules-names-tests' will
be compiled with MODULE_NAME=testsuite instead of
MODULE_NAME=extramodules.
(gen-as-const-headers): Move to tests-internal.
(do-tests-clean, common-mostlyclean): Support tests-internal.
* Makeconfig (built-modules): Add testsuite.
* Makefile: Change libof-check-installed-headers-c and
libof-check-installed-headers-cxx to 'testsuite'.
* Rules: Likewise. Support tests-internal.
* benchtests/strcoll-inputs/filelist#en_US.UTF-8:
Remove extra-modules.mk.
* config.h.in: Don't check for __OPTIMIZE__ or __FAST_MATH__ here.
* include/libc-symbols.h: Move definitions of _GNU_SOURCE,
PASTE_NAME, PASTE_NAME1, IN_MODULE, IS_IN, and IS_IN_LIB to the
very top of the file and rationalize their order.
If MODULE_NAME is not defined at all, define IS_IN to always be
false, and don't define _ISOMAC.
If any of IS_IN (testsuite), IS_IN_build, or __cplusplus are
true, define _ISOMAC and suppress everything else in this file,
starting with the inclusion of config.h.
Do check for inappropriate definitions of __OPTIMIZE__ and
__FAST_MATH__ here, but only if _ISOMAC is not defined.
Correct some out-of-date commentary.
* include/math.h: If _ISOMAC is defined, undefine NO_LONG_DOUBLE
and _Mlong_double_ before including math.h.
* include/string.h: If _ISOMAC is defined, don't expose
_STRING_ARCH_unaligned. Move a comment to a more appropriate
location.
* include/errno.h, include/stdio.h, include/stdlib.h, include/string.h
* include/time.h, include/unistd.h, include/wchar.h: No need to
check __cplusplus nor use __BEGIN_DECLS/__END_DECLS.
* misc/sys/cdefs.h (__NTHNL): New macro.
* sysdeps/m68k/m680x0/fpu/bits/mathinline.h
(__m81_defun): Use __NTHNL to avoid errors with GCC 6.
* elf/tst-env-setuid-tunables.c: Include config.h with _LIBC
defined, for HAVE_TUNABLES.
* inet/tst-checks-posix.c: No need to define _ISOMAC.
* intl/tst-gettext2.c: Provide own definition of N_.
* math/test-signgam-finite-c99.c: No need to define _ISOMAC.
* math/test-signgam-main.c: No need to define _ISOMAC.
* stdlib/tst-strtod.c: Convert to test-driver. Split locale_test to...
* stdlib/tst-strtod1i.c: ...this new file.
* stdlib/tst-strtod5.c: Convert to test-driver and add copyright notice.
Split tests of __strtod_internal to...
* stdlib/tst-strtod5i.c: ...this new file.
* string/test-string.h: Include stdint.h. Duplicate definition of
inhibit_loop_to_libcall here (from libc-symbols.h).
* string/test-strstr.c: Provide dummy definition of
libc_hidden_builtin_def when including strstr.c.
* sysdeps/ia64/fpu/libm-symbols.h: Suppress entire file in _ISOMAC
mode; no need to test __STRICT_ANSI__ nor __cplusplus as well.
* sysdeps/x86_64/fpu/math-tests-arch.h: Include cpu-features.h.
Don't include init-arch.h.
* sysdeps/x86_64/multiarch/test-multiarch.h: Include cpu-features.h.
Don't include init-arch.h.
* elf/Makefile: Move tst-ptrguard1-static, tst-stackguard1-static,
tst-tls1-static, tst-tls2-static, tst-tls3-static, loadtest,
unload, unload2, circleload1, neededtest, neededtest2,
neededtest3, neededtest4, tst-tls1, tst-tls2, tst-tls3,
tst-tls6, tst-tls7, tst-tls8, tst-dlmopen2, tst-ptrguard1,
tst-stackguard1, tst-_dl_addr_inside_object, and all of the
ifunc tests to tests-internal.
Don't add $(modules-names) to test-extras.
* inet/Makefile: Move tst-inet6_scopeid_pton to tests-internal.
Add tst-deadline to tests-static-internal.
* malloc/Makefile: Move tst-mallocstate and tst-scratch_buffer to
tests-internal.
* misc/Makefile: Move tst-atomic and tst-atomic-long to tests-internal.
* nptl/Makefile: Move tst-typesizes, tst-rwlock19, tst-sem11,
tst-sem12, tst-sem13, tst-barrier5, tst-signal7, tst-tls3,
tst-tls3-malloc, tst-tls5, tst-stackguard1, tst-sem11-static,
tst-sem12-static, and tst-stackguard1-static to tests-internal.
Link tests-internal with libpthread also.
Don't add $(modules-names) to test-extras.
* nss/Makefile: Move tst-field to tests-internal.
* posix/Makefile: Move bug-regex5, bug-regex20, bug-regex33,
tst-rfc3484, tst-rfc3484-2, and tst-rfc3484-3 to tests-internal.
* stdlib/Makefile: Move tst-strtod1i, tst-strtod3, tst-strtod4,
tst-strtod5i, tst-tls-atexit, and tst-tls-atexit-nodelete to
tests-internal.
* sunrpc/Makefile: Move tst-svc_register to tests-internal.
* sysdeps/powerpc/Makefile: Move test-get_hwcap and
test-get_hwcap-static to tests-internal.
* sysdeps/unix/sysv/linux/Makefile: Move tst-setgetname to
tests-internal.
* sysdeps/x86_64/fpu/Makefile: Add all libmvec test modules to
modules-names-tests.
In my change to add configure tests for python I had a brainfart where
I tried to filter out unsupported tests from tests-printers-programs
instead of tests-printers to select tests to build. I realize now
that all of that is completely unnecessary and it would be safe to
just build the tests as long as we don't try to run it.
This patch reverts that bit of the change. Tested with
run-built-tests = no in config.make.
* Rules (tests): Add tests-printers-programs to tests to be
built.
Add a configure check that looks for python3 and python in that order
since we had agreed in the past to prefer python3 over python in all
our code. The patch also adjusts invocations through the various
Makefiles to use the set variable.
* configure.ac: Check for python3 or python.
* configure: Regenerated.
* config.make.in (PYTHON): New variable.
* benchtests/Makefile: Don't define PYTHON.
(bench): Define target only if PYTHON was defined.
* Rules: Don't define PYTHON.
Define pretty printer targets only if PYTHON was defined.
(tests-printers): Add to tests-unsupported if PYTHON is not
found.
(python-flags, python-invoke): Remove.
(tests-printers-out): Use PYTHON instead of python-invoke.
Without -B, python invocations may result in generation of pyc files
for modules within the source tree, which does not work well when the
source tree is read-only.
2016-12-17 Martin Galvan <martingalvan@sourceware.org>
* Rules (python-flags, python-invoke): New.
($(test-printers-out)): Use $(python-flags).
The pretty-printers changes resulted in the new tests showing as
UNRESOLVED (missing .out files) when run-built-tests = no, so
resulting in "make check" exiting with error status.
https://sourceware.org/ml/libc-testresults/2016-q4/msg00014.html
This patch moves the use of $(tests-printers) when generating the
summary of results into the setting of tests-expected, which is
appropriately conditional, matching the conditional for when tests
depends on $(tests-printers-out).
Tested with cross to aarch64 with build-many-glibcs.py, and natively
on x86_64.
* Rules [$(run-built-tests) != no] (tests-expected): Add
$(tests-printers).
(tests): Do not pass $(tests-printers) to merge-test-results.sh.
This patch adds pretty printers for the following NPTL types:
- pthread_mutex_t
- pthread_mutexattr_t
- pthread_cond_t
- pthread_condattr_t
- pthread_rwlock_t
- pthread_rwlockattr_t
To load the pretty printers into your gdb session, do the following:
python
import sys
sys.path.insert(0, '/path/to/glibc/build/nptl/pretty-printers')
end
source /path/to/glibc/source/pretty-printers/nptl-printers.py
You can check which printers are registered and enabled by issuing the
'info pretty-printer' gdb command. Printers should trigger automatically when
trying to print a variable of one of the types mentioned above.
The printers are architecture-independent, and were tested on an AMD64 running
Ubuntu 14.04 and an x86 VM running Fedora 24.
In order to work, the printers need to know the values of various flags that
are scattered throughout pthread.h and pthreadP.h as enums and #defines. Since
replicating these constants in the printers file itself would create a
maintenance burden, I wrote a script called gen-py-const.awk that Makerules uses
to extract the constants. This script is pretty much the same as gen-as-const.awk,
except it doesn't cast the constant values to 'long' and is thorougly documented.
The constants need only to be enumerated in a .pysym file, which is then referenced
by a Make variable called gen-py-const-headers.
As for the install directory, I discussed this with Mike Frysinger and Siddhesh
Poyarekar, and we agreed that it can be handled in a separate patch, and shouldn't
block merging of this one.
In addition, I've written a series of test cases for the pretty printers.
Each lock type (mutex, condvar and rwlock) has two test programs, one for itself
and other for its related 'attributes' object. Each test program in turn has a
PExpect-based Python script that drives gdb and compares its output to the
expected printer's. The tests run on the glibc host, which is assumed to have
both gdb and PExpect; if either is absent the tests will fail with code 77
(UNSUPPORTED). For cross-testing you should use cross-test-ssh.sh as test-wrapper.
I've tested the printers on both native builds and a cross build using a Beaglebone
Black running Debian, with the build system's filesystem shared with the board
through NFS.
Finally, I've written a README that explains all this and more.
* INSTALL: Regenerated.
* Makeconfig: Add comments and whitespace to make the control flow
clearer.
(+link-printers-tests, +link-pie-printers-tests, CFLAGS-printers-tests,
installed-rtld-LDFLAGS, built-rtld-LDFLAGS, link-libc-rpath,
link-libc-tests-after-rpath-link, link-libc-printers-tests): New.
(rtld-LDFLAGS, rtld-tests-LDFLAGS, link-libc-tests-rpath-link,
link-libc-tests): Use the new variables as required.
* Makerules ($(py-const)): New rule.
generated: Add $(py-const).
* README.pretty-printers: New file.
* Rules (tests-printers-programs, tests-printers-out, py-env): New.
(others): Depend on $(py-const).
(tests): Depend on $(tests-printers-programs) or $(tests-printers-out),
as required. Pass $(tests-printers) to merge-test-results.sh.
* manual/install.texi: Add requirements for testing the pretty printers.
* nptl/Makefile (gen-py-const-headers, pretty-printers, tests-printers,
CFLAGS-test-mutexattr-printers.c CFLAGS-test-mutex-printers.c,
CFLAGS-test-condattr-printers.c, CFLAGS-test-cond-printers.c,
CFLAGS-test-rwlockattr-printers.c CFLAGS-test-rwlock-printers.c,
tests-printers-libs): Define.
* nptl/nptl-printers.py: New file.
* nptl/nptl_lock_constants.pysym: Likewise.
* nptl/test-cond-printers.c: Likewise.
* nptl/test-cond-printers.py: Likewise.
* nptl/test-condattr-printers.c: Likewise.
* nptl/test-condattr-printers.py: Likewise.
* nptl/test-mutex-printers.c: Likewise.
* nptl/test-mutex-printers.py: Likewise.
* nptl/test-mutexattr-printers.c: Likewise.
* nptl/test-mutexattr-printers.py: Likewise.
* nptl/test-rwlock-printers.c: Likewise.
* nptl/test-rwlock-printers.py: Likewise.
* nptl/test-rwlockattr-printers.c: Likewise.
* nptl/test-rwlockattr-printers.py: Likewise.
* scripts/gen-py-const.awk: Likewise.
* scripts/test_printers_common.py: Likewise.
* scripts/test_printers_exceptions.py: Likewise.
Testing with run-built-tests = no generates many UNRESOLVED results in
tests.sum (and so in the output of "make check"), for all the tests
that are only compiled and not run in such a configuration. This
doesn't seem useful in the "make check" output, and also causes "make
check" to exist with error status even when all tests that can be run
in such a configuration passed.
This patch changes it not to consider those tests when generating
subdir-tests.sum, and so tests.sum, so that you get a smaller number
of tests considered in the final results rather than a huge pile of
UNRESOLVED.
Tested with a cross-compiler to ARM in a run-built-tests = no
configuration.
* Rules (tests-expected): New variable, depending on
$(run-built-tests).
(tests): Pass $(tests-expected) to merge-test-results.sh, not
$(tests).
The tests-unsupported variable lists tests that should neither be
compiled nor run, because some support needed to compile them is
missing.
The implementation of this feature involves having a rule to create
.out files for these tests that takes precedence over the default
rule. This does not work in the run-built-tests = no case (cross
compiling without use of a wrapper to run the tests on a separate
system, in which cases most tests are compiled only) because in that
case the tests target depends on $(tests) to ensure all tests get
compiled. This patch changes that dependency to filter out
$(tests-unsupported).
Tested with cross-compilation to ARM with GCC 5, where libstdc++ is
missing some C++11 support because of the bug I fixed in
<https://gcc.gnu.org/ml/gcc-patches/2015-10/msg01040.html> and so
tests-unsupported is nonempty and the tests in question fail to
compile. (When I originally observed the bug, it was with a native
build / test simply using an x86_64 compiler that had been configured
as a cross compiler to isolate it from the system headers / libraries,
so the configuration issue applied to the compiler but run-built-tests
was yes, so I don't observe the issue with tests-unsupported with that
compiler.)
* Rules [$(run-built-tests) = no] (tests): Do not depend on
$(tests-unsupported).
This adds a test to ensure that the problems fixed in the last several
patches do not recur. Each directory checks the headers that it
installs for two properties: first, each header must be compilable in
isolation, as both C and C++, under a representative combination of
language and library conformance levels; second, there is a blacklist
of identifiers that may not appear in any installed header, currently
consisting of the legacy BSD typedefs. (There is an exemption for the
headers that define those typedefs, and for the RPC headers. It may be
necessary to make this more sophisticated if we add more stuff to the
blacklist in the future.)
In order for this test to work correctly, every wrapper header
that actually defines something must guard those definitions with
#ifndef _ISOMAC. This is the existing mechanism used by the conform/
tests to tell wrapper headers not to define anything that the public
header wouldn't, and not to use anything from libc-symbols.h. conform/
only cares for headers that we need to check for standards conformance,
whereas this test applies to *every* header. (Headers in include/ that
are either installed directly, or are internal-use-only and do *not*
correspond to any installed header, are not affected.)
* scripts/check-installed-headers.sh: New script.
* Rules: In each directory that defines header files to be installed,
run check-installed-headers.sh on them as a special test.
* Makefile: Likewise for the headers installed at top level.
* include/aliases.h, include/alloca.h, include/argz.h
* include/arpa/nameser.h, include/arpa/nameser_compat.h
* include/elf.h, include/envz.h, include/err.h
* include/execinfo.h, include/fpu_control.h, include/getopt.h
* include/gshadow.h, include/ifaddrs.h, include/libintl.h
* include/link.h, include/malloc.h, include/mcheck.h
* include/mntent.h, include/netinet/ether.h
* include/nss.h, include/obstack.h, include/printf.h
* include/pty.h, include/resolv.h, include/rpc/auth.h
* include/rpc/auth_des.h, include/rpc/auth_unix.h
* include/rpc/clnt.h, include/rpc/des_crypt.h
* include/rpc/key_prot.h, include/rpc/netdb.h
* include/rpc/pmap_clnt.h, include/rpc/pmap_prot.h
* include/rpc/pmap_rmt.h, include/rpc/rpc.h
* include/rpc/rpc_msg.h, include/rpc/svc.h
* include/rpc/svc_auth.h, include/rpc/xdr.h
* include/rpcsvc/nis_callback.h, include/rpcsvc/nislib.h
* include/rpcsvc/yp.h, include/rpcsvc/ypclnt.h
* include/rpcsvc/ypupd.h, include/shadow.h
* include/stdio_ext.h, include/sys/epoll.h
* include/sys/file.h, include/sys/gmon.h, include/sys/ioctl.h
* include/sys/prctl.h, include/sys/profil.h
* include/sys/statfs.h, include/sys/sysctl.h
* include/sys/sysinfo.h, include/ttyent.h, include/utmp.h
* sysdeps/arm/nacl/include/bits/setjmp.h
* sysdeps/mips/include/sys/asm.h
* sysdeps/unix/sysv/linux/include/sys/sysinfo.h
* sysdeps/unix/sysv/linux/include/sys/timex.h
* sysdeps/x86/fpu/include/bits/fenv.h:
Add #ifndef _ISOMAC guard around internal declarations.
Add multiple-inclusion guard if not already present.
This reverts commit 62ce266b0b.
The change is not mature enough because it needs the following fixes:
1. Redirect test output to a file like other tests
2. Eliminate the need to use a .gdbinit because distributions will
break without it. I should have caught that but I was in too much
of a hurry to get the patch in :/
3. Feature checking during configure to determine things like minimum
required gdb version, python-pexpect version, etc. to make sure
that tests work correctly.
This patch adds pretty printers for the following NPTL types:
- pthread_mutex_t
- pthread_mutexattr_t
- pthread_cond_t
- pthread_condattr_t
- pthread_rwlock_t
- pthread_rwlockattr_t
To load the pretty printers into your gdb session, do the following:
python
import sys
sys.path.insert(0, '/path/to/glibc/build/nptl/pretty-printers')
end
source /path/to/glibc/source/pretty-printers/nptl-printers.py
You can check which printers are registered and enabled by issuing the
'info pretty-printer' gdb command. Printers should trigger automatically when
trying to print a variable of one of the types mentioned above.
The printers are architecture-independent, and were manually tested on both
the gdb CLI and Eclipse CDT.
In order to work, the printers need to know the values of various flags that
are scattered throughout pthread.h and pthreadP.h as enums and #defines. Since
replicating these constants in the printers file itself would create a
maintenance burden, I wrote a script called gen-py-const.awk that Makerules uses
to extract the constants. This script is pretty much the same as gen-as-const.awk,
except it doesn't cast the constant values to 'long' and is thorougly documented.
The constants need only to be enumerated in a .pysym file, which is then referenced
by a Make variable called gen-py-const-headers.
As for the install directory, I discussed this with Mike Frysinger and Siddhesh
Poyarekar, and we agreed that it can be handled in a separate patch, and it shouldn't
block merging of this one.
In addition, I've written a series of test cases for the pretty printers.
Each lock type (mutex, condvar and rwlock) has two test programs, one for itself
and other for its related 'attributes' object. Each test program in turn has a
PExpect-based Python script that drives gdb and compares its output to the
expected printer's. The tests run on the glibc host, which is assumed to have
both gdb and PExpect; if either is absent the tests will fail with code 77
(UNSUPPORTED). For cross-testing you should use cross-test-ssh.sh as test-wrapper.
I've tested the printers on both a native build and a cross build using a Beaglebone
Black, with the build system's filesystem shared with the board through NFS.
Finally, I've written a README that explains all this and more.
Hopefully this should be good to go in now. Thanks.
ChangeLog:
2016-07-04 Martin Galvan <martin.galvan@tallertechnologies.com>
* Makeconfig (build-hardcoded-path-in-tests): Set to 'yes' for shared builds
if tests-need-hardcoded-path is defined.
(all-subdirs): Add pretty-printers.
* Makerules ($(py-const)): New rule.
* Rules (others): Add $(py-const), if defined.
* nptl/Makefile (gen-py-const-headers): Define.
* nptl/nptl-printers.py: New file.
* nptl/nptl_lock_constants.pysym: Likewise.
* pretty-printers/Makefile: Likewise.
* pretty-printers/README: Likewise.
* pretty-printers/test-condvar-attributes.c: Likewise.
* pretty-printers/test-condvar-attributes.p: Likewise.
* pretty-printers/test-condvar-printer.c: Likewise.
* pretty-printers/test-condvar-printer.py: Likewise.
* pretty-printers/test-mutex-attributes.c: Likewise.
* pretty-printers/test-mutex-attributes.py: Likewise.
* pretty-printers/test-mutex-printer.c: Likewise.
* pretty-printers/test-mutex-printer.py: Likewise.
* pretty-printers/test-rwlock-attributes.c: Likewise.
* pretty-printers/test-rwlock-attributes.py: Likewise.
* pretty-printers/test-rwlock-printer.c: Likewise.
* pretty-printers/test-rwlock-printer.py: Likewise.
* pretty-printers/test_common.py: Likewise.
* scripts/gen-py-const.awk: Likewise.
For situations where we are cross-building or where we want to avoid
building on the target system, we want a way to only build benchmarks
and then copy them over to the target system to run them. I have also
added a simple enhancement for the 'bench' target where all benchmark
binaries are built and then the benchmarks executed.
Tested on arm.
Makefile.in (bench-build): New target.
Rules (PHONY): Add bench-build target.
benchtests/Makefile (bench): Depend on bench-build.
(bench-build): New target.
TEST_IFUNC is only tested in two headers, bench-string.h and
test-string.h, after it gets defined by those headers, and it never
gets undefined.
Thus no defines of TEST_IFUNC are needed, and the *-ifunc.c tests that
just define TEST_IFUNC and include other tests are also redundant, as
is the code to remove $(tests-ifunc) and $(xtests-ifunc) conditionally
from tests and xtests. This patch removes the useless defines and
tests of TEST_IFUNC and the associated useless tests and makefile
code. It thereby fixes a series of warnings
"../string/test-string.h:21:0: warning: "TEST_IFUNC" redefined" where
test-string.h defines TEST_IFUNC to empty, other files define it to 1
and this produces warnings.
Tested for x86_64.
* debug/test-stpcpy_chk-ifunc.c: Remove file.
* debug/test-strcpy_chk-ifunc.c: Likewise.
* wcsmbs/test-wcschr-ifunc.c: Likewise.
* wcsmbs/test-wcscmp-ifunc.c: Likewise.
* wcsmbs/test-wcscpy-ifunc.c: Likewise.
* wcsmbs/test-wcslen-ifunc.c: Likewise.
* wcsmbs/test-wcsrchr-ifunc.c: Likewise.
* wcsmbs/test-wmemcmp-ifunc.c: Likewise.
* Rules [$(multi-arch) = no] (tests): Do not filter out
$(tests-ifunc).
[$(multi-arch) = no] (xtests): Do not filter out $(xtests-ifunc).
* debug/Makefile (tests-ifunc): Remove variable.
(tests): Do not add $(tests-ifunc).
* wcsmbs/Makefile (tests-ifunc): Remove variable.
(tests): Do not add $(tests-ifunc).
* benchtests/bench-string.h (TEST_IFUNC): Remove macro.
[TEST_IFUNC]: Remove conditionals.
* string/test-string.h (TEST_IFUNC): Remove macro.
[TEST_IFUNC]: Remove conditionals.
One wart in the original support for test wrappers for cross testing,
as noted in
<https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the
requirement for test wrappers to pass a poorly-defined set of
environment variables from the build system to the system running the
glibc under test. Although some variables are passed explicitly via
$(test-wrapper-env), including LD_* variables that simply can't be
passed implicitly because of the side effects they'd have on the build
system's dynamic linker, others are passed implicitly, including
variables such as GCONV_PATH and LOCPATH that could potentially affect
the build system's libc (so effectively relying on any such effects
not breaking the wrappers). In addition, the code in
cross-test-ssh.sh for preserving environment variables is fragile (it
depends on how bash formats a list of exported variables, and could
well break for multi-line variable definitions where the contents
contain things looking like other variable definitions).
This patch moves to explicitly passing environment variables via
$(test-wrapper-env). Makefile variables that previously used
$(test-wrapper) are split up into -before-env and -after-env parts
that can be passed separately to the various .sh files used in
testing, so those files can then insert environment settings between
the two parts.
The common default environment settings in make-test-out are made into
a separate makefile variable that can also be passed to scripts,
rather than many scripts duplicating those settings (for testing an
installed glibc, it is desirable to have the GCONV_PATH setting on
just one place, so just that one place needs to support it pointing to
an installed sysroot instead of the build tree). The default settings
are included in the variables such as $(test-program-prefix), so that
if tests do not need any non-default settings they can continue to use
single variables rather than the split-up variables.
Although this patch cleans up LC_ALL=C settings (that being part of
the common defaults), various LANG=C and LANGUAGE=C settings remain.
Those are generally unnecessary and I propose a subsequent cleanup to
remove them. LC_ALL takes precedence over LANG, and while LANGUAGE
takes precedence over LC_ALL, it only does so for settings other than
LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C
locale, and anything that gets LC_ALL=C does not need the other
settings.
While preparing this patch I noticed some tests with .sh files that
appeared to do nothing beyond what the generic makefile support for
tests can do (localedata/tst-wctype.sh - the makefiles support -ENV
variables and .input files - and localedata/tst-mbswcs.sh - just runs
five tests that could be run individually from the makefile). So I
propose another subsequent cleanup to move those to using the generic
support instead of special .sh files.
Tested x86_64 (native) and powerpc32 (cross).
* Makeconfig (run-program-env): New variable.
(run-program-prefix-before-env): Likewise.
(run-program-prefix-after-env): Likewise.
(run-program-prefix): Define in terms of new variables.
(built-program-cmd-before-env): New variable.
(built-program-cmd-after-env): Likewise.
(built-program-cmd): Define in terms of new variables.
(test-program-prefix-before-env): New variable.
(test-program-prefix-after-env): Likewise.
(test-program-prefix): Define in terms of new variables.
(test-program-cmd-before-env): New variable.
(test-program-cmd-after-env): Likewise.
(test-program-cmd): Define in terms of new variables.
* Rules (make-test-out): Use $(run-program-env).
* scripts/cross-test-ssh.sh (env_blacklist): Remove variable.
(help): Do not mention environment variables. Mention
--timeoutfactor option.
(timeoutfactor): New variable.
(blacklist_exports): Remove function.
(exports): Remove variable.
(command): Do not include ${exports}.
* manual/install.texi (Configuring and compiling): Do not mention
test wrappers preserving environment variables. Mention that last
assignment to a variable must take precedence.
* INSTALL: Regenerated.
* benchtests/Makefile (run-bench): Use $(run-program-env).
* catgets/Makefile ($(objpfx)test1.cat): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)test2.cat): Do not specify environment variables
explicitly.
($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)sample.SJIS.cat): Do not specify environment variables
explicitly.
* catgets/test-gencat.sh: Use test_program_cmd_before_env,
run_program_env and test_program_cmd_after_env arguments.
* elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env).
* elf/tst-pathopt.sh: Use run_program_env argument.
* iconvdata/Makefile ($(objpfx)iconv-test.out): Use
$(test-wrapper-env) and $(run-program-env).
* iconvdata/run-iconv-test.sh: Use test_wrapper_env and
run_program_env arguments.
* iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly.
* intl/Makefile ($(objpfx)tst-gettext.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-gettext2.out): Likewise.
* intl/tst-gettext.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* intl/tst-gettext2.sh: Likewise.
* intl/tst-gettext4.sh: Do not set environment variables
explicitly.
* intl/tst-gettext6.sh: Likewise.
* intl/tst-translit.sh: Likewise.
* malloc/Makefile ($(objpfx)tst-mtrace.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* malloc/tst-mtrace.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* math/Makefile (run-regen-ulps): Use $(run-program-env).
* nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env).
* nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C
explicitly with each use of ${test_wrapper_env}.
* posix/Makefile ($(objpfx)wordexp-tst.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* posix/tst-getconf.sh: Do not set environment variables
explicitly.
* posix/wordexp-tst.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* stdio-common/tst-printf.sh: Do not set environment variables
explicitly.
* stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use
$(test-program-prefix-before-env), $(run-program-env) and
$(test-program-prefix-after-env).
* stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
Split $test calls into $test_pre and $test.
* timezone/Makefile (build-testdata): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
localedata/ChangeLog:
* Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use
$(built-program-cmd-before-env), $(run-program-env) and
$(built-program-cmd-after-env).
($(objpfx)sort-test.out): Use $(test-program-prefix-before-env),
$(run-program-env) and $(test-program-prefix-after-env).
($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env),
$(run-program-env) and $(run-program-prefix-after-env).
($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env),
$(run-program-env) and $(built-program-cmd-after-env).
($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env),
$(run-program-env), $(run-program-prefix-after-env),
$(test-program-prefix-before-env) and
$(test-program-prefix-after-env).
($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env),
$(run-program-env) and $(test-program-cmd-after-env).
($(objpfx)tst-wctype.out): Likewise.
($(objpfx)tst-langinfo.out): Likewise.
($(objpfx)tst-langinfo-static.out): Likewise.
* gen-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* sort-test.sh: Use test_program_prefix_before_env,
run_program_env and test_program_prefix_after_env arguments.
* tst-ctype.sh: Use tst_ctype_before_env, run_program_env and
tst_ctype_after_env arguments.
* tst-fmon.sh: Use run_program_prefix_before_env, run_program_env
and run_program_prefix_after_env arguments.
* tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env
and tst_langinfo_after_env arguments.
* tst-locale.sh: Use localedef_before_env, run_program_env and
localedef_after_env arguments.
* tst-mbswcs.sh: Do not set environment variables explicitly.
* tst-numeric.sh: Likewise.
* tst-rpmatch.sh: Likewise.
* tst-trans.sh: Use run_program_prefix_before_env,
run_program_env, run_program_prefix_after_env,
test_program_prefix_before_env and test_program_prefix_after_env
arguments.
* tst-wctype.sh: Use tst_wctype_before_env, run_program_env and
tst_wctype_after_env arguments.
Tests run using the default $(make-test-out) automatically get
GCONV_PATH and LC_ALL set, whether or not those environment variables
are actually needed for the individual test. However, they do not get
LOCPATH set, meaning that a large number of tests have -ENV settings
just to set LOCPATH.
This patch moves LOCPATH into the default environment used for all
tests, on the principle that like GCONV_PATH any settings needed to
use files associated with the newly built library, rather than any old
installed files, are appropriate to use by default.
A further motivation is that various tests using .sh files also set
some combination of LC_ALL, GCONV_PATH and LOCPATH. Preferably .sh
files should also use the default environment with any additions
required for the individual test. Now, it was suggested in
<https://sourceware.org/ml/libc-alpha/2014-05/msg00715.html> that
various Makefile variables used in testing should be derived by
composing the -before-env and -after-env variables used when explicit
environment settings are required. With such a change, it's also
natural for those variables to include the default settings (via some
intermediate makefile variable also used in make-test-out).
Because some .sh files only set variables that correspond to the
default settings, or a subset thereof, and this applies to more of the
.sh files once LOCPATH is in the default settings, doing so reduces
the size of a revised version of
<https://sourceware.org/ml/libc-alpha/2014-05/msg00596.html>: scripts
only needing the (expanded) default settings will not need to receive
the separate -before-env and -after-env variables, only the single
variable they do at present. So moving LOCPATH into the default
settings can reduce churn caused by subsequent patches.
Tested x86_64 and x86.
* Rules (make-test-out): Include
LOCPATH=$(common-objpfx)localedata in default environment.
* debug/Makefile (tst-chk1-ENV): Remove variable.
(tst-chk2-ENV): Likewise.
(tst-chk3-ENV): Likewise.
(tst-chk4-ENV): Likewise.
(tst-chk5-ENV): Likewise.
(tst-chk6-ENV): Likewise.
(tst-lfschk1-ENV): Likewise.
(tst-lfschk2-ENV): Likewise.
(tst-lfschk3-ENV): Likewise.
(tst-lfschk4-ENV): Likewise.
(tst-lfschk5-ENV): Likewise.
(tst-lfschk6-ENV): Likewise.
* iconvdata/Makefile (bug-iconv6-ENV): Likewise.
(tst-iconv7-ENV): Likewise.
* intl/Makefile (LOCPATH-ENV): Likewise.
(tst-codeset-ENV): Likewise.
(tst-gettext3-ENV): Likewise.
(tst-gettext5-ENV): Likewise.
* libio/Makefile (tst-widetext-ENV): Don't set LOCPATH.
(tst-fopenloc-ENV): Likewise.
(tst-fgetws-ENV): Remove variable.
(tst-ungetwc1-ENV): Likewise.
(tst-ungetwc2-ENV): Likewise.
(bug-ungetwc2-ENV): Likewise.
(tst-swscanf-ENV): Likewise.
(bug-ftell-ENV): Likewise.
(tst-fgetwc-ENV): Likewise.
(tst-fseek-ENV): Likewise.
(tst-ftell-partial-wide-ENV): Likewise.
(tst-ftell-active-handler-ENV): Likewise.
(tst-ftell-append-ENV): Likewise.
* posix/Makefile (tst-fnmatch-ENV): Likewise.
(tst-regexloc-ENV): Likewise.
(bug-regex1-ENV): Likewise.
(tst-regex-ENV): Likewise.
(tst-regex2-ENV): Likewise.
(bug-regex5-ENV): Likewise.
(bug-regex6-ENV): Likewise.
(bug-regex17-ENV): Likewise.
(bug-regex18-ENV): Likewise.
(bug-regex19-ENV): Likewise.
(bug-regex20-ENV): Likewise.
(bug-regex22-ENV): Likewise.
(bug-regex23-ENV): Likewise.
(bug-regex25-ENV): Likewise.
(bug-regex26-ENV): Likewise.
(bug-regex30-ENV): Likewise.
(bug-regex32-ENV): Likewise.
(bug-regex33-ENV): Likewise.
(bug-regex34-ENV): Likewise.
(bug-regex35-ENV): Likewise.
(tst-rxspencer-ENV): Likewise.
(tst-rxspencer-no-utf8-ENV): Likewise.
* stdio-common/Makefile (tst-sprintf-ENV): Likewise.
(tst-sscanf-ENV): Likewise.
(tst-swprintf-ENV): Likewise.
(tst-swscanf-ENV): Likewise.
(test-vfprintf-ENV): Likewise.
(scanf13-ENV): Likewise.
(bug14-ENV): Likewise.
(tst-grouping-ENV): Likewise.
* stdlib/Makefile (tst-strtod-ENV): Likewise.
(tst-strtod3-ENV): Likewise.
(tst-strtod4-ENV): Likewise.
(tst-strtod5-ENV): Likewise.
(testmb2-ENV): Likewise./
* string/Makefile (tst-strxfrm-ENV): Likewise.
(tst-strxfrm2-ENV): Likewise.
(bug-strcoll1-ENV): Likewise.
(test-strcasecmp-ENV): Likewise.
(test-strncasecmp-ENV): Likewise.
* time/Makefile (tst-strptime-ENV): Likewise.
(tst-ftime_l-ENV): Likewise.
* wcsmbs/Makefile (tst-btowc-ENV): Likewise.
(tst-mbrtowc-ENV): Likewise.
(tst-wcrtomb-ENV): Likewise.
(tst-mbrtowc2-ENV): Likewise.
(tst-c16c32-1-ENV): Likewise.
(tst-mbsnrtowcs-ENV): Likewise.
localedata/ChangeLog:
* Makefile (TEST_MBWC_ENV): Remove variable.
(tst_iswalnum-ENV): Likewise.
(tst_iswalpha-ENV): Likewise.
(tst_iswcntrl-ENV): Likewise.
(tst_iswctype-ENV): Likewise.
(tst_iswdigit-ENV): Likewise.
(tst_iswgraph-ENV): Likewise.
(tst_iswlower-ENV): Likewise.
(tst_iswprint-ENV): Likewise.
(tst_iswpunct-ENV): Likewise.
(tst_iswspace-ENV): Likewise.
(tst_iswupper-ENV): Likewise.
(tst_iswxdigit-ENV): Likewise.
(tst_mblen-ENV): Likewise.
(tst_mbrlen-ENV): Likewise.
(tst_mbrtowc-ENV): Likewise.
(tst_mbsrtowcs-ENV): Likewise.
(tst_mbstowcs-ENV): Likewise.
(tst_mbtowc-ENV): Likewise.
(tst_strcoll-ENV): Likewise.
(tst_strfmon-ENV): Likewise.
(tst_strxfrm-ENV): Likewise.
(tst_swscanf-ENV): Likewise.
(tst_towctrans-ENV): Likewise.
(tst_towlower-ENV): Likewise.
(tst_towupper-ENV): Likewise.
(tst_wcrtomb-ENV): Likewise.
(tst_wcscat-ENV): Likewise.
(tst_wcschr-ENV): Likewise.
(tst_wcscmp-ENV): Likewise.
(tst_wcscoll-ENV): Likewise.
(tst_wcscpy-ENV): Likewise.
(tst_wcscspn-ENV): Likewise.
(tst_wcslen-ENV): Likewise.
(tst_wcsncat-ENV): Likewise.
(tst_wcsncmp-ENV): Likewise.
(tst_wcsncpy-ENV): Likewise.
(tst_wcspbrk-ENV): Likewise.
(tst_wcsrtombs-ENV): Likewise.
(tst_wcsspn-ENV): Likewise.
(tst_wcsstr-ENV): Likewise.
(tst_wcstod-ENV): Likewise.
(tst_wcstok-ENV): Likewise.
(tst_wcstombs-ENV): Likewise.
(tst_wcswidth-ENV): Likewise.
(tst_wcsxfrm-ENV): Likewise.
(tst_wctob-ENV): Likewise.
(tst_wctomb-ENV): Likewise.
(tst_wctrans-ENV): Likewise.
(tst_wctype-ENV): Likewise.
(tst_wcwidth-ENV): Likewise.
(tst-digits-ENV): Likewise.
(tst-mbswcs6-ENV): Likewise.
(tst-xlocale1-ENV): Likewise.
(tst-xlocale2-ENV): Likewise.
(tst-strfmon1-ENV): Likewise.
(tst-strptime-ENV): Likewise.
(tst-setlocale-ENV): Don't set LOCPATH.
(bug-iconv-trans-ENV): Remove variable.
(tst-sscanf-ENV): Likewise.
(tst-leaks-ENV): Don't set LOCPATH.
(bug-setlocale1-ENV): Remove variable.
(bug-setlocale1-static-ENV): Likewise.
(tst-setlocale2-ENV): Likewise.
This patch, an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00197.html>, makes
testsuite runs generate an overall summary of test results.
A new script merge-test-results.sh deals both with collecting results
within a directory to a file with all the results from that directory,
and collecting the results from subdirectories into a single overall
file (there's not much in common between the two modes of operation of
the script, but it seemed silly to have two separate scripts for
this). Within a directory, missing results produce UNRESOLVED lines;
at top level, missing results for a whole directory produce an ERROR
line (since toplevel can't identify what the specific missing tests
are in this case).
Note that this does not change the rules for when "make" considers
there has been an error, or terminates, so unexpected failures will
still cause make to terminate, or, with -k, mean the commands for
"tests" don't get run because of failure of a dependency.
Tested x86_64, including that the summary does in fact reflect all the
tests with .test-result files.
* scripts/merge-test-results.sh: New file.
* Makefile (tests-special-notdir): New variable.
(tests): Run merge-test-results.sh.
(xtests): Likewise.
* Rules (tests-special-notdir): New variable.
(xtests-special-notdir): Likewise.
(tests): Run merge-test-results.sh
(xtests): Likewise.
This patch is a revised and updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>.
In order to generate overall summaries of the results of all tests in
the glibc testsuite, we need to identify and concatenate the files
with the results of individual tests.
Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this.
However, the normal glibc approach is explicit enumeration of the
expected set of files with a given property, rather than all files
matching some pattern like that. Furthermore, we would like to be
able to mark tests as UNRESOLVED if the file with their results is for
some reason missing, and in future we would like to be able to mark
tests as UNSUPPORTED if they are disabled for a particular
configuration (rather than simply having them missing from the list of
tests as at present). Such handling of tests that were not run or did
not record results requires an explicit enumeration of tests.
For the tests following the default makefile rules, $(tests) (and
$(xtests)) provides such an enumeration. Others, however, are added
directly as dependencies of the "tests" and "xtests" makefile
targets. This patch changes the makefiles to put them in variables
tests-special and xtests-special, with appropriate dependencies on the
tests listed there then being added centrally.
Those variables are used in Rules and so need to be set before Rules
is included in a subdirectory makefile, which is often earlier in the
makefile than the dependencies were present before. We previously
discussed the question of where to include Rules; see the question at
<https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a
discussion in
<https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why
Rules is included early rather than late in subdirectory makefiles.
It was necessary to avoid an indirection through the check-abi target
and get the check-abi-* targets for individual libraries into the
tests-special variable. The intl/ test $(objpfx)tst-gettext.out,
previously built only because of dependencies from other tests, was
also added to tests-special for the same reason.
The entries in tests-special are the full makefile targets, complete
with $(objpfx) and .out. If a future change causes tests to be named
consistently with a .out suffix, this can be changed to include just
the path relative to $(objpfx), without .out.
Tested x86_64, including that the same set of files is generated in
the build directory by a build and testsuite run both before and after
the patch (except for changes to the
elf/tst-null-argv.debug.out.<number> file name), and a build with
run-built-tests=no to verify there aren't any more obvious instances
of the issue Marcus Shawcroft reported with a previous version in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>.
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(tests): Depend on $(tests-special).
* Makerules (check-abi-list): New variable.
(check-abi): Depend on $(check-abi-list).
[$(subdir) = elf] (tests-special): Add
$(objpfx)check-abi-libc.out.
[$(build-shared) = yes && subdir] (tests-special): Add
$(check-abi-list).
[$(build-shared) = yes && subdir] (tests): Do not depend on
check-abi.
* Rules (tests): Depend on $(tests-special).
(xtests): Depend on $(xtests-special).
* catgets/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* conform/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* elf/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* grp/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* iconv/Makefile (xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* iconvdata/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* intl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable. Also add
$(objpfx)tst-gettext.out.
* io/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* libio/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* malloc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* misc/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* nptl_db/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* posix/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* resolv/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(xtests): Change dependencies to ....
(xtests-special): ... additions to this variable.
* stdio-common/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
(do-tst-unbputc): Remove target.
(do-tst-printf): Likewise.
* stdlib/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* string/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
* sysdeps/x86/Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
localedata:
* Makefile (tests): Change dependencies to ....
(tests-special): ... additions to this variable.
This patch, an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00193.html>, starts
the process of generating explicit PASS or FAIL status for individual
glibc tests. It's based on Tomas Dohnalek's patch
<https://sourceware.org/ml/libc-alpha/2012-10/msg00278.html>, but is
deliberately more minimal: it doesn't try to cover any tests outside
of $(tests) / $(xtests) (that's for a later patch), nor does it put
the result together in an overall summary file (again, a later patch):
it just generates the .test-result files.
Thus, this patch keeps the overall logic for when a testsuite run
finishes completely unchanged: a test failing will terminate the run.
I think we *should* move to a more conventional approach where plain
"make check" does not terminate for an individual test failure, unless
e.g. you say "make stop-on-test-failure=y check", but that sort of
policy change is best done as a separate patch once the infrastructure
is in place to generate summary files for completed test runs (which
will entirely consist of PASS and XFAIL lines if the testsuite run
reaches the point of generating them, until such a policy change is
made).
Tested x86_64.
2014-02-14 Tomas Dohnalek <tdohnale@redhat.com>
Joseph Myers <joseph@codesourcery.com>
* Makeconfig (test-name): New variable.
(evaluate-test): Likewise.
* Makerules (do-test-clean): Remove .test-result files.
(common-mostlyclean): Likewise.
* Rules ($(objpfx)%.out): Use $(evaluate-test) in both rules.
* scripts/evaluate-test.sh: New file.
run-via-rtld-prefix checks whether the program to be run is a static
test and skips if it is. This is fine, except that it assumes that
the program to be run is the second $^, which is true only for tests.
This change creates an rtld-prefix, which is simply the dynamic linker
prefix with the necessary arguments and uses that in the non-test
targets.
Write output from the currently running benchmark into a temporary
file and move files around only once the current run is complete.
That way we don't lose data from the last two runs due to an
incomplete run.
This allows us to define custom functions in C code files and
benchmark scenarios rather than just functions. The main current use
of this is to separate the slow and fast path benchmarks for math
functions.
($(all-subdirs-targets)): Use it in place of -C option.
* Rules: Use $(..) instead of ../ if it's already defined.
* Makeconfig (subdir-srcdirs): New variable.
* csu/Makefile (all-Banner-files): Use it.
* configure.in (--enable-add-ons): Set to "yes" by default.
Handle absolute add-on directory names when looking for configure
fragments. Also look for sysdeps/*/preconfigure fragments in add-ons.
Require add-on configure to set $libc_add_on_canonical, use
that in $add_ons_sfx. Substitute add_on_subdirs with computed list
of subdir names each add-on configure set in libc_add_on_subdirs.
* configure: Regenerated.
* Makefile (%/preconfigure: %/preconfigure.in): New pattern rule.
* config.make.in (add-on-subdirs): New substituted variable.
* Makeconfig (all-subdirs): Include $(add-on-subdirs).
Remove $(add-ons), $(sysdep-subdirs).
Don't filter out $(sysdep-inhibit-subdirs).
($(common-objpfx)sysd-dirs): Target removed. Don't include it.
($(common-objpfx)sysd-sorted): Rewritten to feed Depend and Subdirs
files together to gen-sorted.awk, and $(subdirs) via -v.
(subdirs): Remove magic reordering for mach and hurd.
* scripts/gen-sorted.awk: Use subdirs from command line.
Process Subdirs and Depend files directly.
Let Subdirs files use "first dir" and "inhibit dir".
Always move elf to the end of the list.
* hurd/Depend: New file.
* sysdeps/mach/Subdirs: Use "first mach".
* Makefile (dist-separate): Remove linuxthreads.
(dist-separate-linuxthreads): Variable removed.
(glibc-%.tar rule): Use $(sysdeps-add-ons).
* Makerules ($(common-objpfx)Versions.v.i): Use $(subdirs),
not $(all-subdirs).
(sysdep-makefiles): Use $(sysdirs).
(sysdirs): Remove export.
($(+sysdir_pfx)sysd-rules): Handle absolute directory names in
$(config-sysdirs).
(+sysdir_pfx): Variable removed.
(sysd-rules): Use $(common-objpfx) in place of it.
(sysdirs): Variable moved to ...
* Makeconfig (sysdirs): ... here.
Handle absolute directory names in $(config-sysdirs).
(full_config_sysdirs): Variable removed.
* csu/Makefile: Use $(sysdirs) in vpath directive.
* math/Makefile (ulps-file): Use $(sysdirs).
* sysdeps/gnu/Makefile (errlist-c): Likewise.
($(objpfx)errlist-compat.c): Likewise.
* Makeconfig (all-Subdirs-files): Likewise.
($(common-objpfx)config.status): Likewise.
* configure.in (sysnames): Handle absolute add-on directory names.
(sysdeps_add_ons): New variable, AC_SUBST it.
Compute which add-ons contributed sysdeps directories.
* configure: Regenerated.
* config.make.in (sysdeps-add-ons): New substituted variable.
* Makerules (+sysdep_dirs, +sysdep-includes): Variables moved ...
* Makeconfig: ... to here.
(+sysdep_dirs): Append $(sysdeps-add-ons) here.
(+includes): Remove $(objpfx) include, already in $(+sysdep_dirs).
Remove $(includes).
(sysdep-makeconfigs): Use $(+sysdep_dirs).
($(common-objpfx)shlib-versions.v.i): Likewise.
* Makeconfig: Remove hair to set Makeconfig-add-on.
* sysdeps/unix/Makefile (sysdirs): Remove export.
(asm_CPP): Variable removed.
($(common-objpfx)sysd-syscalls): Pass them directly for the script.
* sysdeps/posix/Makefile: New file.
* Makerules (L_tmpnam, TMP_MAX, L_ctermid, L_cuserid): Set non-posix
values here with ?=.
* stdlib/gen-mpn-copy: File removed.
* stdlib/Makefile (distribute): Remove it.
* configure.in: Don't grok --with-gmp.
* configure: Regenerated.
* configure.in (libc_cv_idn): Don't check it; libidn/configure does it.
* configure: Regenerated.
* bare: Directory removed, saved in ports repository.
