[BZ #16885]
* sysdeps/sparc/sparc64/strcmp.S: Fix end comparison handling when
multiple zero bytes exist at the end of a string.
Reported by Aurelien Jarno <aurelien@aurel32.net>
* string/test-strcmp.c (check): Add explicit test for situations where
there are multiple zero bytes after the first.
IEEE 754-2008 defines two ways in which tiny results can be detected,
"before rounding" (based on the infinite-precision result) and "after
rounding" (based on the result when rounded to normal precision as if
the exponent range were unbounded). All binary operations on an
architecture must use the same choice of how tininess is detected.
soft-fp has so far implemented only before-rounding tininess
detection. This patch adds support for after-rounding tininess
detection. A new macro _FP_TININESS_AFTER_ROUNDING is added that
sfp-machine.h must define (soft-fp is meant to be self-contained so
the existing tininess.h files aren't used here, though the information
going in sfp-machine.h has been taken from them). The soft-fp macros
dealing with raising underflow exceptions then handle the cases where
the choice matters specially, rounding a copy of the input to the
appropriate precision to see if a value that's tiny before rounding
isn't tiny after rounding.
Tested for mips64 using GCC trunk (which now uses soft-fp on MIPS, so
supporting exceptions and rounding modes for long double where not
previously supported - this is the immediate motivation for doing this
patch now) together with (a) a patch to sysdeps/mips/math-tests.h to
enable exceptions / rounding modes tests for long double for GCC 4.9
and later, and (b) corresponding changes applied to libgcc's soft-fp
and sfp-machine.h files. In the libgcc context this is also tested on
x86_64 (also an after-rounding architecture) with testcases for
__float128 that I intend to add to the GCC testsuite when updating
soft-fp there.
(To be clear: this patch does not fix any glibc bugs that were
user-visible in past releases, since after-rounding architectures
didn't use soft-fp in any affected case with support for
floating-point exceptions - so there is no corresponding Bugzilla bug.
Rather, it works together with the GCC changes to use soft-fp on MIPS
to allow previously absent long double functionality to work properly,
and allows soft-fp to be used in glibc on after-rounding architectures
in cases where it couldn't previously be used.)
* soft-fp/op-common.h (_FP_DECL): Mark exponent as possibly
unused.
(_FP_PACK_SEMIRAW): Determine tininess based on rounding shifted
value if _FP_TININESS_AFTER_ROUNDING and unrounded value is in
subnormal range.
(_FP_PACK_CANONICAL): Determine tininess based on rounding to
normal precision if _FP_TININESS_AFTER_ROUNDING and unrounded
value has largest subnormal exponent.
* soft-fp/soft-fp.h [FP_NO_EXCEPTIONS]
(_FP_TININESS_AFTER_ROUNDING): Undefine and redefine to 0.
* sysdeps/aarch64/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): New macro.
* sysdeps/alpha/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/arm/soft-fp/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING):
Likewise.
* sysdeps/mips/mips64/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/mips/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/powerpc/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/sh/soft-fp/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING):
Likewise.
* sysdeps/sparc/sparc32/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/sparc/sparc64/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/tile/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING):
Likewise.
[BZ #16150]
* sysdeps/sparc/sparc64/multiarch/add_n.S: Resolve to the correct generic
symbol in the non-vis3 case in static builds.
* sysdeps/sparc/sparc64/multiarch/addmul_1.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/mul_1.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/sub_n.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/submul_1.S: Likewise.
The pointer guard used for pointer mangling was not initialized for
static applications resulting in the security feature being disabled.
The pointer guard is now correctly initialized to a random value for
static applications. Existing static applications need to be
recompiled to take advantage of the fix.
The test tst-ptrguard1-static and tst-ptrguard1 add regression
coverage to ensure the pointer guards are sufficiently random
and initialized to a default value.
Resolves: #15465
The program name may be unavailable if the user application tampers
with argc and argv[]. Some parts of the dynamic linker caters for
this while others don't, so this patch consolidates the check and
fallback into a single macro and updates all users.
[BZ #15442] This adds support for the inverse interpretation of the
quiet bit of IEEE 754 floating-point NaN data that some processors
use. This includes in particular MIPS architecture processors; the
payload used for the canonical qNaN encoding is updated accordingly
so as not to interfere with the quiet bit.
* sysdeps/sparc/sparc32/sparcv9/bits/atomic.h
(__arch_compare_and_exchange_val_32_acq): Use %g0 as second
argument of CAS if possible.
* sysdeps/sparc/sparc64/bits/atomic.h
(__arch_compare_and_exchange_val_32_acq): Likewise.
(__arch_compare_and_exchange_val_64_acq): Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile: Add vis3
trunc{,f} to libm-sysdep_routes.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_trunc-vis3.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_trunc.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_truncf-vis3.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_truncf.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_trunc.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_truncf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_trunc.S: New file.
* sysdeps/sparc/sparc64/fpu/s_truncf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile: Add vis3
nearbyint{,f} to libm-sysdep_routes.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyint-vis3.S:
New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyint.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyintf-vis3.S:
New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyintf.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_nearbyint.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_nearbyintf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyint-vis3.S: New
file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyint.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyintf-vis3.S: New
file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyintf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_nearbyint.S: New file.
* sysdeps/sparc/sparc64/fpu/s_nearbyintf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile: Add vis3
fdim/fdimf to libm-sysdep_routines.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim-vis3.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdimf-vis3.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdimf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fdim.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fdimf.S: New file.
* sysdeps/sparc/sparc32/fpu/s_fdim.S: New file.
* sysdeps/sparc/sparc32/fpu/s_fdimf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_fdim.S: New file.
* sysdeps/sparc/sparc64/fpu/s_fdimf.S: New file.
* math/Makefile: Recognize gmp-sysdep_routines.
* sysdeps/sparc/sparc64/multiarch/Makefile: Add VIS3 optimized GMP routines
to sysdeps.
* sysdeps/sparc/sparc64/multiarch/add_n-vis3.S: New file.
* sysdeps/sparc/sparc64/multiarch/add_n.S: New file.
* sysdeps/sparc/sparc64/multiarch/addmul_1-vis3.S: New file.
* sysdeps/sparc/sparc64/multiarch/addmul_1.S: New file.
* sysdeps/sparc/sparc64/multiarch/mul_1-vis3.S: New file.
* sysdeps/sparc/sparc64/multiarch/mul_1.S: New file.
* sysdeps/sparc/sparc64/multiarch/sub_n-vis3.S: New file.
* sysdeps/sparc/sparc64/multiarch/sub_n.S: New file.
* sysdeps/sparc/sparc64/multiarch/submul_1-vis3.S: New file.
* sysdeps/sparc/sparc64/multiarch/submul_1.S: New file.
* crypt/Makefile: Move test targets after toplevel Rules
inclusion. Grab any necessary sysdep routines when linking.
* crypt/md5.c (md5_process_block): Remove define, we will always
name it __md5_process_block.
(md5_finish_ctx): Update md5_process_block call.
(md5_stream): Likewise.
(md5_process_bytes): Likewise.
(md5_process_block): Rename to __md5_process_block and move to ...
* crypt/md5-block.c: ... here.
* crypt/sha256.c (sha256_process_block): Move to ...
* crypt/sha256-block.c: ... here.
* crypt/sha512.c (sha512_process_block): Move to ...
* crypt/sha512-block.c: ... here.
* locale/Makefile (CFLAGS-md5.c): Define to add crypt/ to include
path.
* sysdeps/sparc/sparc-ifunc.c (sparc_libc_ifunc): Define.
* sysdeps/sparc/sparc64/multiarch/Makefile
(libcrypt-sysdep_routines): Add crypto assembler sysdeps when in
crypt subdir.
(localedef-aux): Add md5 crypto assembler when in locale subdir.
* sysdeps/sparc/sparc32/sparcv9/multiarch/Makefile: Mirror sparc64
multiarch changes.
* sysdeps/sparc/sparc64/multiarch/md5-block.c: New file.
* sysdeps/sparc/sparc64/multiarch/md5-crop.S: New file.
* sysdeps/sparc/sparc64/multiarch/sha256-block.c: New file.
* sysdeps/sparc/sparc64/multiarch/sha256-crop.S: New file.
* sysdeps/sparc/sparc64/multiarch/sha512-block.c: New file.
* sysdeps/sparc/sparc64/multiarch/sha512-crop.S: New file.
* sysdeps/sparc/sparc32/sparcv9/multiarch/md5-block.c: New file.
* sysdeps/sparc/sparc32/sparcv9/multiarch/md5-crop.S: New file.
* sysdeps/sparc/sparc32/sparcv9/multiarch/sha256-block.c: New
file.
* sysdeps/sparc/sparc32/sparcv9/multiarch/sha256-crop.S: New file.
* sysdeps/sparc/sparc32/sparcv9/multiarch/sha512-block.c: New
file.
* sysdeps/sparc/sparc32/sparcv9/multiarch/sha512-crop.S: New file.
* sysdeps/sparc/sparc64/multiarch/memcpy-niagara4.S: On 32-bit, clear
upper 32-bits of the length value in %o2 since we use branch-on-register
tests which consider the entire 64-bit register.
* sysdeps/sparc/sparc64/multiarch/memset-niagara4.S: New file.
* sysdeps/sparc/sparc32/sparcv9/multiarch/memset-niagara4.S: New
file.
* sysdeps/sparc/sparc64/multiarch/Makefile: Add to
sysdep_routines.
* sysdeps/sparc/sparc32/sparcv9/multiarch/Makefile: Likewise.
* sysdeps/sparc/sparc64/multiarch/memset.S: Use Niagara-4 memset
and bzero when HWCAP_SPARC_CRYPTO is present.
* sysdeps/sparc/sparc64/multiarch/memcpy-niagara4.S: New file.
* sysdeps/sparc/sparc32/sparcv9/multiarch/memcpy-niagara4.S: New
file.
* sysdeps/sparc/sparc64/multiarch/Makefile: Add to
sysdep_routines.
* sysdeps/sparc/sparc32/sparcv9/multiarch/Makefile: Likewise.
* sysdeps/sparc/sparc64/multiarch/memcpy.S: Use Niagara-4 memcpy
and mempcpy when HWCAP_SPARC_CRYPTO is set.
[BZ #14376]
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_rela): Do not
pass reloc->r_addend in as the 'high' argument to
sparc64_fixup_plt when handling R_SPARC_JMP_IREL relocations.
fmovd clears the current exception field in the %fsr, fsrc2
does not and therefore runs more efficiently on some cpus.
* sysdeps/sparc/sparc64/memcpy.S: Use fsrc2 to move 64-bit
values between float registers.
* sysdeps/sparc/sparc64/memset.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/memcpy-niagara2.S: Likewise.
* sysdeps/sparc/sparc32/soft-fp/q_util.c
(___Q_simulate_exceptions): Use real FP ops rather than writing
into the %fsr.
* sysdeps/sparc/sparc32/soft-fp/q_util.c (__Qp_handle_exceptions):
Likewise.
* soft-fp/soft-fp.h (FP_CUR_EXCEPTIONS): Define.
(FP_TRAPPING_EXCEPTIONS): Provide default implementation.
* sysdeps/sparc/sparc32/soft-fp/sfp-machine.h
(FP_TRAPPING_EXCEPTIONS): Define.
* sysdeps/sparc/sparc64/soft-fp/sfp-machine.h
(FP_TRAPPING_EXCEPTIONS): Define.
* soft-fp/op-common.h (_FP_PACK_SEMIRAW): Signal underflow for
subnormals only when inexact has been signalled or underflow
exceptions are enabled.
(_FP_PACK_CANONICAL): Likewise.
[BZ# 6794]
* sysdeps/ieee754/ldbl-96/s_ilogbl.c: Moved to ...
* sysdeps/ieee754/ldbl-96/e_ilogbl.c: ... here.
Rename __ilogbl to __ieee754_ilogbl and remove weak_alias.
* sysdeps/ieee754/ldbl-128/s_ilogbl.c: Moved to ...
* sysdeps/ieee754/ldbl-128/e_ilogbl.c: ... here.
Rename __ilogbl to __ieee754_ilogbl and remove weak_alias.
* sysdeps/ieee754/ldbl-64-128/s_ilogbl.c: Moved to ...
* sysdeps/ieee754/ldbl-64-128/e_ilogbl.c: ... here.
* sysdeps/sparc/sparc64/soft-fp/s_ilogbl.c: Moved to ...
* sysdeps/sparc/sparc64/soft-fp/e_ilogbl.c: ... here.
Rename __ilogbl to __ieee754_ilogbl and remove weak_alias.
* sysdeps/sparc/sparc64/multiarch/memcpy.S: Provide a hidden def to
the IFUNC routine in the libc case.
* sysdeps/sparc/sparc64/multiarch/memcpy.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/multiarch/rtld-memset.c: New file.
* sysdeps/sparc/sparc32/sparcv9/multiarch/rtld-memcpy.c: New file.
* sysdeps/sparc/sparc32/sparcv9/rtld-memset.c: New file.
* sysdeps/sparc/sparc32/sparcv9/rtld-memcpy.c: New file.
* sysdeps/sparc/sparc64/multiarch/rtld-memset.c: New file.
* sysdeps/sparc/sparc64/multiarch/rtld-memcpy.c: New file.
* sysdeps/sparc/sparc64/rtld-memset.c: New file.
* sysdeps/sparc/sparc64/rtld-memcpy.c: New file.
* sysdeps/sparc/Makefile: Add -fPIC to ASFLAGS-.os here....
* sysdeps/sparc/sparc32/Makefile: rather than here...
* sysdeps/sparc/sparc64/Makefile: and here.
* sysdeps/sparc/sparc64/fpu/s_fmax.S: New file.
* sysdeps/sparc/sparc64/fpu/s_fmaxf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_fmin.S: New file.
* sysdeps/sparc/sparc64/fpu/s_fminf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fmax.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fmaxf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fmin.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fminf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fmax.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fmaxf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fmaxf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fmin-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fmin.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fminf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fminf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fmax-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fmax.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fmaxf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fmaxf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fmin-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fmin.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fminf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fminf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile: Add new vis3
fmin/fmax sysdep routines.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finite-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finite.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finitef-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finitef.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinff-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinff.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnan-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnan.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnanf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnanf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrint-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrint.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrintf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrintf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rint-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rint.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rintf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rintf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile: Add new VIS3 routines.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceil-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceil.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceilf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceilf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabs-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabs.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabsf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabsf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floor-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floor.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floorf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floorf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrint-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrint.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrintf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrintf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rint-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rint.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rintf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rintf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrt-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrt.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrtf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrtf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile: Add new VIS3 routines.
* sysdeps/sparc/sparc32/sparcv9/fpu/unix/sysv/linux/multiarch/Implies:
New file.
* sysdeps/sparc/configure.in: New file.
* sysdeps/sparc/configure: Generate.
* configure.in (libc_cv_sparc_as_vis3): Substitute.
* configure: Regenerate.
* config.h.in (HAVE_AS_VIS3_SUPPORT): New.
* config.make.in (have-as-vis3): New.
* sysdeps/sparc/sparc32/sparcv9/Makefile (ASFLAGS-*): If VIS3 is
available use -Av9d instead of -Av9a.
* sysdeps/sparc/sparc64/Makefile: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysign-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysign.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysignf-vis3.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysignf.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbit-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbit.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbitf-vis3.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbitf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_copysign.S (__copysign): Use fzeros/fnegs
to load 0x80000000 into a float register instead of using the stack.
* sysdeps/sparc/sparc64/fpu/s_copysignf.S (__copysignf): Likewise.
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_rela): Protect local
variables with appropriate CPP guards.
* sysdeps/sparc/sparc32/dl-trampoline.S: Propagate the stack_ptr from the
frame pointer, not the stack pointer. Correct layout comments. Fix test
on resulting framesize and the management of the outregs buffer for pltexit.
Preserve floating point return values across _dl_call_pltexit call.
* sysdeps/sparc/sparc64/dl-trampoline.S: Fix test on resulting
framesize and the management of the outregs buffer for pltexit.
Preserve floating point return values across _dl_call_pltexit
call.
* elf/sotruss-lib.c (la_sparc32_gnu_pltenter, la_sparc64_gnu_pltenter,
la_sparc32_gnu_pltexit, la_sparc64_gnu_pltexit): New functions.
(print_exit): Fix format string for return register value.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_llrint.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_llrintf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_lrint.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_lrintf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_llrint.S: New file.
* sysdeps/sparc/sparc64/fpu/s_llrintf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_lrint.S: New file.
* sysdeps/sparc/sparc64/fpu/s_lrintf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_finite.S: New file.
* sysdeps/sparc/sparc64/fpu/s_finitef.S: New file.
* sysdeps/sparc/sparc64/fpu/s_isinf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_isinff.S: New file.
* sysdeps/sparc/sparc32/fpu/s_signbit.S: New file.
* sysdeps/sparc/sparc32/fpu/s_signbitf.S: New file.
* sysdeps/sparc/sparc32/fpu/s_signbitl.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_isnan.S: New file.
* sysdeps/sparc/sparc64/fpu/s_isnan.S: New file.
* sysdeps/sparc/sparc64/fpu/s_isnanf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_signbit.S: New file.
* sysdeps/sparc/sparc64/fpu/s_signbitf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_signbitl.S: New file.
* sysdeps/sparc/sparc32/fpu/w_sqrt.S: New file.
* sysdeps/sparc/sparc32/fpu/w_sqrtf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrt.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrtf.S: New file.
* sysdeps/sparc/sparc64/fpu/w_sqrt.S: New file.
* sysdeps/sparc/sparc64/fpu/w_sqrtf.S: New file.
* sysdeps/sparc/sparc32/fpu/s_copysign.S: New file.
* sysdeps/sparc/sparc32/fpu/s_copysignf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_copysign.S: New file.
* sysdeps/sparc/sparc64/fpu/s_copysignf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_floor.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_floorf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_floor.S: New file.
* sysdeps/sparc/sparc64/fpu/s_floorf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_ceil.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_ceilf.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_rint.S: New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_rintf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_ceil.S: New file.
* sysdeps/sparc/sparc64/fpu/s_ceilf.S: New file.
* sysdeps/sparc/sparc64/fpu/s_rint.S: New file.
* sysdeps/sparc/sparc64/fpu/s_rintf.S: New file.
/
* sysdeps/sparc/Makefile: Add -fPIC when building crt{i,n}.S
* sysdeps/sparc/crti.S: New file.
* sysdeps/sparc/crtn.S: New file.
* sysdeps/sparc/sparc32/Makefile: Remove initfini handling.
* sysdeps/sparc/sparc64/Makefile: Likewise.
nptl/
* sysdeps/sparc/Makefile: Add -fPIC when building pt-crti.S and crtn.S
2010-03-03 David S. Miller <davem@davemloft.net>
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_lazy_rel): Must
pass '1' for 't' argument to sparc_fixup_plt.
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_lazy_rel):
Likewise.
* sysdeps/sparc/sparc32/dl-plt.h (OPCODE_BA_PT): Define.
(sparc_fixup_plt): Document 't' argument. Enable branch
optimization and use v9 branches when possible. Explain why we
cannot unconditionally patch the branch into the first PLT
instruction.
* sysdeps/sparc/sparc64/dl-plt.h (sparc64_fixup_plt): Document 't'
argument. Use v9 branches when possible. Explain why we can in
fact unconditionally use a branch in the first PLT instruction
here.
When prelinking fails we have to rewrite the PLT, but the code
doing so forgets to adjust all rela->r_offset addresses by the
location of where the object was actually mapped.
make sure any registers used with 64-bit 'branch-on-register'
instructions have their top 32-bits clear.
* sysdeps/sparc/sparc64/sparcv9v/memset.S: Likewise.
* sysdeps/sparc/sparc64/sparcv9v2/memcpy.S: Likewise.
2008-10-09 Jakub Jelinek <jakub@redhat.com>
David S. Miller <davem@davemloft.net>
* sysdeps/sparc/sparc64/sparcv9v/memcpy.S: When not USE_BPR,
make sure any registers used with 64-bit 'branch-on-register'
instructions have their top 32-bits clear.
* sysdeps/sparc/sparc64/sparcv9v/memset.S: Likewise.
* sysdeps/sparc/sparc64/sparcv9v2/memcpy.S: Likewise.
(FIRST_FRAME_POINTER): Define.
* sysdeps/sparc/sparc64/backtrace.c: New file.
2008-05-20 Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/sparc/sparc32/sigcontextinfo.h
(FIRST_FRAME_POINTER): Define.
2008-05-09 David S. Miller <davem@davemloft.net>
* sysdeps/sparc/sparc64/backtrace.c: New file.
* sysdeps/sparc/sparc64/Makefile: Use -mcpu=v9 for initfini.s build.
2008-05-05 David S. Miller <davem@davemloft.net>
* sysdeps/sparc/sparc32/Makefile: Use -mcpu=v7 for initfini.s build.
* sysdeps/sparc/sparc64/Makefile: Use -mcpu=v9 for initfini.s build.
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_rela):
Ensure relocation doesn't clobber any bits outside of the
immediate field for R_SPARC_TLS_LE_HIX22, R_SPARC_WDISP30,
R_SPARC_HI22 and R_SPARC_H44.
* configure: Regenerated.
* sysdeps/sparc/sparc32/sparcv9v/memcpy.S: New file.
* sysdeps/sparc/sparc32/sparcv9v/memset.S: New file.
* sysdeps/sparc/sparc64/sparcv9v/memcpy.S: New file.
* sysdeps/sparc/sparc64/sparcv9v/memset.S: New file.
prototype.
(nexttowardf): Redirect to __nldbl_nexttowardf.
(nexttoward): Redirect to nextafter.
(__MATHDECL_2, __MATHDECL_1): Redirect *l functions to
non-*l versions if __LONG_DOUBLE_MATH_OPTIONAL and
__NO_LONG_DOUBLE_MATH.
* math/complex.h (__MATHDECL_1): Likewise.
* math/bits/mathcalls.h (nexttoward): Don't prototype if
__LDBL_COMPAT.
* misc/sys/cdefs.h: Include <bits/wordsize.h>.
(__LDBL_COMPAT, __LDBL_REDIR1, __LDBL_REDIR, __LDBL_REDIR1_NTH,
__LDBL_REDIR_NTH, __LDBL_REDIR_DECL): New macros.
* libio/bits/stdio-ldbl.h: New file.
* libio/Makefile (headers): Add it.
* libio/stdio.h [__LDBL_COMPAT]: #include it.
* libio/bits/libio-ldbl.h: New file.
* libio/Makefile (headers): Add it.
* libio/libio.h [__LDBL_COMPAT]: #include it.
* libio/libioP.h: Include <math_ldbl_opt.h>.
* include/wchar.h (__fwprintf, __vfwprintf): Fix commented out
attribute.
(__vfwprintf_chk): New prototype. Add libc_hidden_proto.
* wcsmbs/bits/wchar-ldbl.h: New file.
* wcsmbs/Makefile (headers): Add it.
* wcsmbs/wchar.h [__LDBL_COMPAT]: #include it.
* wcsmbs/bits/wchar2.h (__vswprintf_alias): Removed.
(vswprintf): Define as a macro rather than inline function.
* stdio-common/bits/printf-ldbl.h: New file.
* stdio-common/Makefile (headers): Add it.
* stdio-common/printf.h [__LDBL_COMPAT]: #include it.
* libio/fwprintf.c: Include libioP.h.
(fwprintf): Use ldbl_weak_alias instead of weak_alias.
* libio/fwscanf.c: Include libioP.h.
(fwscanf): Rename to __fwscanf and add ldbl_strong_alias.
* libio/iovdprintf.c (vdprintf): Use ldbl_weak_alias instead of
weak_alias.
* libio/iovsprintf.c (_IO_vsprintf): Rename to __IO_vsprintf,
add ldbl_strong_alias and use INTDEF2 instead of INTDEF.
(vsprintf): Use ldbl_weak_alias instead of weak_alias.
* libio/iovsscanf.c (__vsscanf, vsscanf): Use ldbl_weak_alias
instead of weak_alias.
* libio/iovswscanf.c (vswscanf): Rename to __vswscanf,
add ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
* libio/obprintf.c (obstack_printf, obstack_vprintf): Use
ldbl_weak_alias instead of weak_alias.
* libio/swprintf.c: Include libioP.h.
(swprintf): Rename to __swprintf and add ldbl_strong_alias.
* libio/swscanf.c: Include libioP.h.
(swscanf): Rename to __swscanf and add ldbl_strong_alias.
* libio/vasprintf.c (vasprintf): Use ldbl_weak_alias instead of
weak_alias.
* libio/vscanf.c (vscanf): Use ldbl_weak_alias instead of
weak_alias.
* libio/vsnprintf.c (__vsnprintf, vsnprintf): Use ldbl_weak_alias
instead of weak_alias.
* libio/vswprintf.c (__vswprintf): Remove alias.
(vswprintf): Use ldbl_weak_alias instead of weak_alias.
* libio/vwprintf.c: Include libioP.h.
(vwprintf): Rename to __vwprintf and add ldbl_strong_alias.
* libio/vwscanf.c (vwscanf): Rename to __vwscanf and add
ldbl_strong_alias.
* libio/wprintf.c: Include libioP.h.
(wprintf): Rename to __wprintf and add ldbl_strong_alias.
* libio/wscanf.c: Include libioP.h.
(wscanf): Rename to __wscanf and add ldbl_strong_alias.
* stdio-common/asprintf.c (__asprintf): Rename to ___asprintf, add
ldbl_strong_alias and use INTDEF2 instead of INTDEF.
(asprintf): Use ldbl_weak_alias instead of weak_alias.
* stdio-common/dprintf.c (dprintf): Rename to __dprintf, add
ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
* stdio-common/fprintf.c: Include libioP.h.
(fprintf): Rename to __fprintf, add ldbl_strong_alias and
use ldbl_hidden_def instead of libc_hidden_def.
(_IO_fprintf): Use ldbl_weak_alias instead of weak_alias.
* stdio-common/fscanf.c: Include libioP.h.
(fscanf): Rename to __fscanf and add ldbl_strong_alias.
* stdio-common/printf.c: Include libioP.h.
(printf): Rename to __printf and add ldbl_strong_alias.
(_IO_printf): Use ldbl_strong_alias instead of strong_alias.
* stdio-common/printf_fp.c (__printf_fp): Rename to __printf_fp, add
ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
* stdio-common/printf_size.c (printf_size): Rename to __printf_size
and add ldbl_strong_alias.
* stdio-common/scanf.c (scanf): Rename to __scanf and add
ldbl_strong_alias.
* stdio-common/snprintf.c (snprintf): Use ldbl_weak_alias instead of
weak_alias.
* stdio-common/sprintf.c (sprintf): Rename to __sprintf, add
ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
(_IO_sprintf): Use ldbl_strong_alias instead of strong_alias.
* stdio-common/sscanf.c: Include libioP.h instead of iolibio.h.
(sscanf): Rename to __sscanf and add ldbl_strong_alias.
* stdio-common/vfprintf.c (vfprintf): Define to
_IO_vfprintf_internal. Use ldbl_strong_alias instead. Use
ldbl_hidden_def instead of libc_hidden_def.
(_IO_vfprintf_internal): Clear is_long_double if __ldbl_is_dbl,
handle the argument as double if it is non-zero.
(vfwprintf): Use ldbl_weak_alias instead of weak_alias.
(_IO_vfprintf): Add ldbl_strong_alias.
* stdio-common/vfscanf.c (_IO_vfscanf): Rename to
_IO_vfscanf_internal, don't use strtold if __ldbl_is_dbl, add
ldbl_strong_alias.
(vfwscanf): Use ldbl_weak_alias instead of weak_alias.
(__vfscanf): Rename to ___vfscanf, add ldbl_strong_alias and
use ldbl_hidden_def instead of libc_hidden_def.
(vfscanf): Use ldbl_weak_alias instead of weak_alias.
* stdio-common/vprintf.c: Include libioP.h.
(vprintf): Rename to __vprintf and add ldbl_strong_alias.
* debug/fprintf_chk.c (__fprintf_chk): Rename to ___fprintf_chk
and add ldbl_strong_alias.
* debug/printf_chk.c (__printf_chk): Rename to ___printf_chk
and add ldbl_strong_alias.
* debug/snprintf_chk.c: Include libioP.h.
(__snprintf_chk): Rename to ___snprintf_chk and add ldbl_strong_alias.
* debug/sprintf_chk.c: Include libioP.h.
(__sprintf_chk): Rename to ___sprintf_chk and add ldbl_strong_alias.
* debug/vfprintf_chk.c (__vfprintf_chk): Rename to ___vfprintf_chk,
add ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
* debug/vfwprintf_chk.c (__vfwprintf_chk): Add libc_hidden_def.
* debug/vprintf_chk.c (__vprintf_chk): Rename to ___vprintf_chk
and add ldbl_strong_alias.
* debug/vsnprintf_chk.c (__vsnprintf_chk): Rename to ___vsnprintf_chk,
add ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
* debug/vsprintf_chk.c (__vsprintf_chk): Rename to ___vsprintf_chk,
add ldbl_strong_alias and use ldbl_hidden_def instead of
libc_hidden_def.
* stdlib/stdlib.h (strtold): Don't define inline if [!__LDBL_COMPAT].
* wcsmbs/wchar.h (wcstold): Likewise.
* stdlib/strtod_l.c: Include math_ldbl_opt.h.
(____STRTOF_INTERNAL): Define.
(INTERNAL (__STRTOF)): Rename to ____STRTOF_INTERNAL.
(__STRTOF): Call ____STRTOF_INTERNAL instead.
[LONG_DOUBLE_COMPAT] (strtold_l, wcstold_l, __strtold_l, __wcstold_l):
Add compatibility symbols.
* stdlib/strtod.c: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (strtold, wcstold, __strtold_internal,
__wcstold_internal): Add compatibility symbols.
* stdlib/strtold.c: Include bits/wordsize.h, wchar.h.
(NEW, NEW1): Define.
(__new_strtold, __new_wcstold): New prototypes.
(____new_strtold_internal, ____new_wcstold_internal): Likewise.
Add libc_hidden_proto.
(STRTOF): Define to NEW (*told).
[__LONG_DOUBLE_MATH_OPTIONAL] (wcstold, strtold): Add
long_double_symbol.
[__LONG_DOUBLE_MATH_OPTIONAL] (__wcstold_internal,
__strtold_internal): Likewise. Add libc_hidden_ver.
* stdlib/bits/stdlib-ldbl.h: New file.
* stdlib/Makefile (headers): Add it.
* stdlib/stdlib.h [__LDBL_COMPAT]: #include it.
* include/stdlib.h (ecvt_r, fcvt_r, qecvt_r, qfcvt_r): Remove
libc_hidden_proto.
(__ecvt, __fcvt, __gcvt, __ecvt_r, __fcvt_r, __qecvt, __qfcvt,
__qgcvt, __qecvt_r, __qfcvt_r): New prototypes.
* misc/efgcvt_r.c: Include shlib-compat.h.
(LONG_DOUBLE_CVT): Define.
(__APPEND, __APPEND2): Define.
(*fcvt_r): Use __APPEND instead of APPEND. Remove libc_hidden_def.
(*ecvt_r): Likewise.
(cvt_symbol): Define. Use it on fcvt_r and ecvt_r.
* misc/efgcvt.c: Include shlib-compat.h.
(LONG_DOUBLE_CVT): Define.
(__APPEND, __APPEND2): Define.
(fcvt): Use __APPEND instead of APPEND. Remove libc_hidden_def.
(ecvt, gcvt): Likewise.
(cvt_symbol): Define. Use it on fcvt, ecvt and gcvt.
* stdlib/bits/monetary-ldbl.h: New file.
* stdlib/Makefile (headers): Add it.
* stdlib/monetary.h [__LDBL_COMPAT]: #include it.
* stdlib/strfmon.c: Include math_ldbl_opt.h.
(strfmon): Rename to __strfmon and add ldbl_strong_alias.
* stdlib/strfmon_l.c: Remove all traces of [!USE_IN_LIBIO].
(__vstrfmon_l): Don't set is_long_double if __ldbl_is_dbl.
(__strfmon_l): Rename to ___strfmon_l and add ldbl_strong_alias.
(strfmon_l): Use ldbl_weak_alias instead of weak_alias.
* misc/bits/syslog-ldbl.h: New file.
* misc/Makefile (headers): Add it.
* misc/sys/syslog.h [__LDBL_COMPAT]: #include it.
* misc/syslog.c: Include math_ldbl_opt.h.
(syslog): Rename to __syslog and add ldbl_strong_alias,
use ldbl_hidden_def instead of libc_hidden_def.
(vsyslog): Rename to __vsyslog and add ldbl_strong_alias,
use ldbl_hidden_def instead of libc_hidden_def.
* sysdeps/generic/math_ldbl_opt.h: New file.
* math/w_j1l.c (j1l, y1l): Rename to __ prefixed variants.
Add weak_alias.
* math/w_j0l.c (j0l, y0l): Likewise.
* math/w_jnl.c (jnl, ynl): Likewise.
* sysdeps/ieee754/ldbl-96/s_nexttoward.c
(__nexttowardl): Remove strong_alias.
(nexttowardl): Remove weak_alias.
* sysdeps/ieee754/ldbl-96/s_erfl.c
(__erfl, __erfcl): Remove strong_alias.
(erfl, erfcl): Remove weak_alias.
* sysdeps/ieee754/ldbl-64-128/s_asinhl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_atanl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_cbrtl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_ceill.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_copysignl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_cosl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_erfl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_expm1l.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_fabsl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_finitel.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_floorl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_fpclassifyl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_frexpl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_ilogbl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_isinfl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_isnanl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_llrintl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_llroundl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_log1pl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_logbl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_lrintl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_lroundl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_modfl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_nearbyintl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_nextafterl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_nexttoward.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_nexttowardf.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_nexttowardfd.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_remquol.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_rintl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_roundl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_scalblnl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_scalbnl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_signbitl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_sincosl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_sinl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_tanhl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_tanl.c: New file.
* sysdeps/ieee754/ldbl-64-128/s_truncl.c: New file.
* sysdeps/ieee754/ldbl-64-128/strtold_l.c: New file.
* sysdeps/ieee754/ldbl-64-128/w_expl.c: New file.
* sysdeps/ieee754/ldbl-opt/configure.in: New file.
* sysdeps/ieee754/ldbl-opt/configure: New file.
* sysdeps/ieee754/ldbl-opt/Makefile: New file.
* sysdeps/ieee754/ldbl-opt/Versions: New file.
* sysdeps/ieee754/ldbl-opt/cabs.c: New file.
* sysdeps/ieee754/ldbl-opt/cabsl.c: New file.
* sysdeps/ieee754/ldbl-opt/carg.c: New file.
* sysdeps/ieee754/ldbl-opt/cargl.c: New file.
* sysdeps/ieee754/ldbl-opt/cimag.c: New file.
* sysdeps/ieee754/ldbl-opt/cimagl.c: New file.
* sysdeps/ieee754/ldbl-opt/conj.c: New file.
* sysdeps/ieee754/ldbl-opt/conjl.c: New file.
* sysdeps/ieee754/ldbl-opt/creal.c: New file.
* sysdeps/ieee754/ldbl-opt/creall.c: New file.
* sysdeps/ieee754/ldbl-opt/math_ldbl_opt.c: New file.
* sysdeps/ieee754/ldbl-opt/math_ldbl_opt.h: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-acos.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-acosh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-asin.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-asinh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-asprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-atan.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-atan2.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-atanh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cabs.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cacos.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cacosh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-carg.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-casin.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-casinh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-catan.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-catanh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cbrt.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ccos.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ccosh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ceil.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cexp.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cimag.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-clog.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-clog10.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-compat.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-compat.h: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-conj.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-copysign.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cos.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cosh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cpow.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-cproj.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-creal.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-csin.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-csinh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-csqrt.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ctan.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ctanh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-dprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-drem.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-erf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-erfc.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-exp.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-exp10.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-exp2.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-expm1.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fabs.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fdim.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-finite.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-floor.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fma.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fmax.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fmin.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fmod.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-frexp.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fwprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fwprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-fwscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-gamma.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-hypot.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ilogb.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-iovfscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-isinf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-isnan.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-j0.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-j1.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-jn.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-ldexp.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-lgamma.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-lgamma_r.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-llrint.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-llround.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-log.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-log10.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-log1p.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-log2.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-logb.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-lrint.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-lround.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-modf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-nan.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-nearbyint.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-nextafter.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-nexttoward.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-nexttowardf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-obstack_printf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-obstack_vprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-pow.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-pow10.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-printf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-printf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-printf_fp.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-printf_size.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-qecvt.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-qecvt_r.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-qfcvt.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-qfcvt_r.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-qgcvt.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-remainder.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-remquo.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-rint.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-round.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-scalb.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-scalbln.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-scalbn.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-scanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-signbit.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-significand.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sin.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sincos.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sinh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-snprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-snprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sqrt.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-sscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-strfmon.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-strfmon_l.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-strtold.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-strtold_l.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-strtoldint.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-swprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-swprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-swscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-syslog.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-syslog_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-tan.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-tanh.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-tgamma.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-trunc.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vasprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vdprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vfprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vfprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vfscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vfwprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vfwprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vfwscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsnprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsnprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vswprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vswprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vswscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsyslog.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vsyslog_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vwprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vwprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-vwscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-wcstold.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-wcstold_l.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-wcstoldint.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-wprintf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-wprintf_chk.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-wscanf.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-y0.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-y1.c: New file.
* sysdeps/ieee754/ldbl-opt/nldbl-yn.c: New file.
* sysdeps/ieee754/ldbl-opt/s_asinh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_atan.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cacos.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cacosh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cacoshl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cacosl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_casin.c: New file.
* sysdeps/ieee754/ldbl-opt/s_casinh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_casinhl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_casinl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_catan.c: New file.
* sysdeps/ieee754/ldbl-opt/s_catanh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_catanhl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_catanl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cbrt.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ccos.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ccosh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ccoshl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ccosl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ceil.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cexp.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cexpl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_clog.c: New file.
* sysdeps/ieee754/ldbl-opt/s_clog10.c: New file.
* sysdeps/ieee754/ldbl-opt/s_clog10l.c: New file.
* sysdeps/ieee754/ldbl-opt/s_clogl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_copysign.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cpow.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cpowl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cproj.c: New file.
* sysdeps/ieee754/ldbl-opt/s_cprojl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_csin.c: New file.
* sysdeps/ieee754/ldbl-opt/s_csinh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_csinhl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_csinl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_csqrt.c: New file.
* sysdeps/ieee754/ldbl-opt/s_csqrtl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ctan.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ctanh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ctanhl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ctanl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_erf.c: New file.
* sysdeps/ieee754/ldbl-opt/s_expm1.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fabs.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fdim.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fdiml.c: New file.
* sysdeps/ieee754/ldbl-opt/s_finite.c: New file.
* sysdeps/ieee754/ldbl-opt/s_floor.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fma.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fmal.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fmax.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fmaxl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fmin.c: New file.
* sysdeps/ieee754/ldbl-opt/s_fminl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_frexp.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ilogb.c: New file.
* sysdeps/ieee754/ldbl-opt/s_isinf.c: New file.
* sysdeps/ieee754/ldbl-opt/s_isnan.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ldexp.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ldexpl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_llrint.c: New file.
* sysdeps/ieee754/ldbl-opt/s_llround.c: New file.
* sysdeps/ieee754/ldbl-opt/s_log1p.c: New file.
* sysdeps/ieee754/ldbl-opt/s_logb.c: New file.
* sysdeps/ieee754/ldbl-opt/s_lrint.c: New file.
* sysdeps/ieee754/ldbl-opt/s_lround.c: New file.
* sysdeps/ieee754/ldbl-opt/s_modf.c: New file.
* sysdeps/ieee754/ldbl-opt/s_nan.c: New file.
* sysdeps/ieee754/ldbl-opt/s_nanl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_nearbyint.c: New file.
* sysdeps/ieee754/ldbl-opt/s_nextafter.c: New file.
* sysdeps/ieee754/ldbl-opt/s_remquo.c: New file.
* sysdeps/ieee754/ldbl-opt/s_rint.c: New file.
* sysdeps/ieee754/ldbl-opt/s_round.c: New file.
* sysdeps/ieee754/ldbl-opt/s_scalbln.c: New file.
* sysdeps/ieee754/ldbl-opt/s_scalbn.c: New file.
* sysdeps/ieee754/ldbl-opt/s_significand.c: New file.
* sysdeps/ieee754/ldbl-opt/s_significandl.c: New file.
* sysdeps/ieee754/ldbl-opt/s_sin.c: New file.
* sysdeps/ieee754/ldbl-opt/s_sincos.c: New file.
* sysdeps/ieee754/ldbl-opt/s_tan.c: New file.
* sysdeps/ieee754/ldbl-opt/s_tanh.c: New file.
* sysdeps/ieee754/ldbl-opt/s_trunc.c: New file.
* sysdeps/ieee754/ldbl-opt/w_acos.c: New file.
* sysdeps/ieee754/ldbl-opt/w_acosh.c: New file.
* sysdeps/ieee754/ldbl-opt/w_acoshl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_acosl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_asin.c: New file.
* sysdeps/ieee754/ldbl-opt/w_asinl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_atan2.c: New file.
* sysdeps/ieee754/ldbl-opt/w_atan2l.c: New file.
* sysdeps/ieee754/ldbl-opt/w_atanh.c: New file.
* sysdeps/ieee754/ldbl-opt/w_atanhl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_cosh.c: New file.
* sysdeps/ieee754/ldbl-opt/w_coshl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_drem.c: New file.
* sysdeps/ieee754/ldbl-opt/w_dreml.c: New file.
* sysdeps/ieee754/ldbl-opt/w_exp.c: New file.
* sysdeps/ieee754/ldbl-opt/w_exp10.c: New file.
* sysdeps/ieee754/ldbl-opt/w_exp10l.c: New file.
* sysdeps/ieee754/ldbl-opt/w_fmod.c: New file.
* sysdeps/ieee754/ldbl-opt/w_fmodl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_hypot.c: New file.
* sysdeps/ieee754/ldbl-opt/w_hypotl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_j0.c: New file.
* sysdeps/ieee754/ldbl-opt/w_j0l.c: New file.
* sysdeps/ieee754/ldbl-opt/w_j1.c: New file.
* sysdeps/ieee754/ldbl-opt/w_j1l.c: New file.
* sysdeps/ieee754/ldbl-opt/w_jn.c: New file.
* sysdeps/ieee754/ldbl-opt/w_jnl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_lgamma.c: New file.
* sysdeps/ieee754/ldbl-opt/w_lgamma_r.c: New file.
* sysdeps/ieee754/ldbl-opt/w_lgammal.c: New file.
* sysdeps/ieee754/ldbl-opt/w_lgammal_r.c: New file.
* sysdeps/ieee754/ldbl-opt/w_log.c: New file.
* sysdeps/ieee754/ldbl-opt/w_log10.c: New file.
* sysdeps/ieee754/ldbl-opt/w_log10l.c: New file.
* sysdeps/ieee754/ldbl-opt/w_log2.c: New file.
* sysdeps/ieee754/ldbl-opt/w_log2l.c: New file.
* sysdeps/ieee754/ldbl-opt/w_logl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_pow.c: New file.
* sysdeps/ieee754/ldbl-opt/w_powl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_remainder.c: New file.
* sysdeps/ieee754/ldbl-opt/w_remainderl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_scalb.c: New file.
* sysdeps/ieee754/ldbl-opt/w_scalbl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_sinh.c: New file.
* sysdeps/ieee754/ldbl-opt/w_sinhl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_sqrt.c: New file.
* sysdeps/ieee754/ldbl-opt/w_sqrtl.c: New file.
* sysdeps/ieee754/ldbl-opt/w_tgamma.c: New file.
* sysdeps/ieee754/ldbl-opt/w_tgammal.c: New file.
* sysdeps/unix/sysv/linux/sparc/bits/wordsize.h: New file.
* sysdeps/unix/sysv/linux/sparc/sparc32/Implies: New file.
* sysdeps/sparc/sparc32/Implies: Move ldbl-128 first and flt-32
after dbl-64.
* sysdeps/unix/sysv/linux/sparc/sparc32/Versions (NLDBL_VERSION):
%define this to to GLIBC_2.4.
* sysdeps/sparc/sparc32/fpu/e_sqrtl.c: New file.
* sysdeps/sparc/sparc32/fpu/s_fabs.c: New file.
* sysdeps/sparc/sparc32/fpu/s_fabsf.S: New file.
* sysdeps/sparc/sparc32/fpu/s_fabsl.c: New file.
* sysdeps/sparc/sparc32/soft-fp/q_qtoui.c: Removed.
* sysdeps/sparc/sparc32/soft-fp/q_qtoux.c: Removed.
* sysdeps/sparc/sparc32/soft-fp/q_qtox.c: Removed.
* sysdeps/sparc/sparc32/soft-fp/q_uitoq.c: Removed.
* sysdeps/sparc/sparc32/soft-fp/q_uxtoq.c: Removed.
* sysdeps/sparc/sparc32/soft-fp/q_xtoq.c: Removed.
* sysdeps/sparc/sparc32/soft-fp/q_lltoq.c: New file.
* sysdeps/sparc/sparc32/soft-fp/q_qtoll.c: New file.
* sysdeps/sparc/sparc32/soft-fp/q_qtou.c: New file.
* sysdeps/sparc/sparc32/soft-fp/q_qtoull.c: New file.
* sysdeps/sparc/sparc32/soft-fp/q_ulltoq.c: New file.
* sysdeps/sparc/sparc32/soft-fp/q_utoq.c: New file.
* sysdeps/sparc/sparc32/soft-fp/Versions: New file.
* sysdeps/sparc/fpu/bits/mathinline.h (__unordered_cmp,
__unordered_v9cmp): Define differently depending on
-m32 -mlong-double-{64,128}.
(__signbitl, sqrtl, __ieee754_sqrtl): New inlines.
* sysdeps/sparc/fpu/bits/mathdef.h (__NO_LONG_DOUBLE_MATH): Remove.
* sysdeps/sparc/sparc32/soft-fp/Makefile (sparc32-quad-routines):
Set.
(sysdep-routines): Add sparc32-quad-routines.
* sysdeps/sparc/sparc32/soft-fp/sfp-machine.h: Include stdlib.h.
(FP_HANDLE_EXCEPTIONS): Call ___Q_simulate_exceptions as a normal
function.
* sysdeps/sparc/sparc32/soft-fp/q_sqrt.c (__ieee754_sqrtl): New
alias to _Q_sqrt.
* sysdeps/sparc/sparc32/soft-fp/q_div.c (_Q_div): Fix a typo.
* sysdeps/sparc/sparc64/soft-fp/sfp-machine.h: Include stdlib.h.
* sysdeps/sparc/sparc32/fpu/libm-test-ulps: Update.
* libio/libio.h (_IO_vfscanf, _IO_vfprintf): Remove __THROW.
(_IO_vfwscanf, _IO_vfwprintf): Likewise.
* libio/libioP.h (_IO_vdprintf): Likewise.
* sysdeps/i386/jmpbuf-unwind.h: New file, moved from nptl/.
* sysdeps/mips/jmpbuf-unwind.h: New file, moved from nptl/.
* sysdeps/powerpc/jmpbuf-unwind.h: New file, moved from nptl/.
* sysdeps/s390/jmpbuf-unwind.h: New file, moved from nptl/.
* sysdeps/sh/jmpbuf-unwind.h: New file, moved from nptl/.
* sysdeps/sparc/sparc32/jmpbuf-unwind.h: New file, moved from nptl/.
* sysdeps/sparc/sparc64/jmpbuf-unwind.h: New file, moved from nptl/.
* sysdeps/x86_64/jmpbuf-unwind.h: New file, moved from nptl/.
* elf/tls-macros.h: Add Sparc64 defines.
* sysdeps/sparc/sparc64/dl-machine.h (sparc64_fixup_plt): Mark as
always_inline.
(elf_machine_fixup_plt): Likewise.
(elf_machine_rela): Handle TLS relocations.
(elf_machine_type_cleaa): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/sysdep.h
(SYSCALL_ERROR_HANDLER_ENTRY): Use sethi/or for GOT reloc.
It does not always fit in R_SPARC_GOT13 when building -fPIC.
Also, add TLS handling.
* sysdeps/unix/sysv/linux/configure.in (arch_minimum_kernel):
Increase it to 2.4.21 for sparc64.
* sysdeps/unix/sysv/linux/sparc/sparc32/clone.S: NULL terminate
backtrace by zero'ing out %fp. Store away flags, func_ptr,
and func_arg in global registers not local registers.
* sysdeps/unix/sysv/linux/sparc/sparc64/clone.S: Handle PTID, TLS,
and CTID arguments properly. Add RESET_PID handling.
* sysdeps/unix/sysv/linux/sparc/sparc64/pause.c: Rework so that we
do not invoke __sigprocmask(). We can always assume rt signals
are present on sparc64, so just do an inline syscall.
2005-04-13 Jakub Jelinek <jakub@redhat.com>
* sysdeps/sparc/sparc64/dl-machine.h: Add dl_machine_h multiple
inclusion guard for the first half of the header.
(elf_machine_type_class, ELF_MACHINE_JMP_SLOT, ELF_MACHINE_NO_REL,
ELF_MACHINE_PLTREL_OVERLAP, elf_machine_runtime_setup,
elf_machine_relplt, DL_STACK_END, RTLD_START): Move into the
#ifndef dl_machine_h guarded part of the header.
2004-12-16 Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/sparc/sparc32/clone.S (__clone): Add support
for NPTL where the PID is stored at userlevel and needs to be reset
when CLONE_THREAD is not used.
* sysdeps/unix/sysv/linux/sparc/sparc64/sysdep.h
(SYSCALL_ERROR_HANDLER): If RTLD_PRIVATE_ERRNO, use rtld_errno
instead of errno.
* sysdeps/unix/sysv/linux/sparc/sparc64/socket.S: Include
sysdep-cancel.h instead of sysdep.h. Handle cancellation.
* sysdeps/sparc/sparc64/fpu/libm-test-ulps: Regenerate.
* sysdeps/ieee754/ldbl-128/e_expl.c: Include stdlib.h.
2004-04-29 Jakub Jelinek <jakub@redhat.com>
* sysdeps/sparc/sparc64/soft-fp/qp_qtoi.c (_Qp_qtoi): Use %f31
for single precision register, add it to __asm clobbers [BZ #139].
* sysdeps/sparc/sparc64/soft-fp/qp_qtoui.c (_Qp_qtoui): Use %f31
for single precision register, add it to __asm clobbers.
* sysdeps/sparc/sparc64/soft-fp/qp_qtoux.c (_Qp_qtoux): Use fqtox
instead of fqtoi in QP_HANDLE_EXCEPTIONS.
* sysdeps/sparc/sparc64/soft-fp/qp_qtox.c (_Qp_qtox): Likewise.
Reported by M. H. VanLeeuwen <vanl@megsinet.net>.
2004-02-29 Paolo Bonzini <bonzini@gnu.org>
* posix/regexec.c (transit_state): Don't handle state == NULL.
Move state log and backreference management...
(merge_state_with_log): ... to this function.
(find_recover_state): New function.
(check_matching): Use find_recover_state to get a non-NULL
state when an invalid state is reached. Compute the amount
of initial characters to be skipped less conservatively when
multi-byte character sets are in use. Do not check
dfa->nbackref if the state log is NULL. Initialize err.
(acquire_init_state_context): Expect err to be initialized.
Fix spacing.
2004-03-05 Jakub Jelinek <jakub@redhat.com>
* sysdeps/sparc/sparc32/elf/start.S: Handle PIEs.
* sysdeps/sparc/sparc64/elf/start.S: Likewise.
2004-02-19 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/generic/libc-start.c [LIBC_START_DISABLE_INLINE] (STATIC):
Define as static.
* sysdeps/powerpc/elf/libc-start.c: Define LIBC_START_DISABLE_INLINE
because gcc does not allow inline of functions that call setjmp.
2004-02-19 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc64/Makefile: Use -finline-limit.
2004-02-19 Jakub Jelinek <jakub@redhat.com>
* elf/rtld.c (_dl_argv): If DL_ARGV_NOT_RELRO defined, don't
use attribute_relro for _dl_argv.
* sysdeps/alpha/dl-machine.h (DL_ARGV_NOT_RELRO): Define.
* sysdeps/ia64/dl-machine.h (DL_ARGV_NOT_RELRO): Define.
* sysdeps/sparc/sparc32/dl-machine.h (DL_ARGV_NOT_RELRO): Define.
* sysdeps/sparc/sparc64/dl-machine.h (DL_ARGV_NOT_RELRO): Define.
vfork instead of fork.
