The default (top-level) version of bits/mathdef.h defines float_t to
double. It is used on ColdFire, MicroBlaze, Nios II and SH3, all of
which define FLT_EVAL_METHOD to 0, so float_t should be float (and C11
requires a certain correspondence between these typedefs and
FLT_EVAL_METHOD values).
I proposed fixing this default in
<https://sourceware.org/ml/libc-alpha/2015-01/msg00499.html>, with no
objections from architecture maintainers, and this patch makes that
fix. As noted in the NEWS entry added, this might affect the ABIs of
non-glibc libraries (ImageMagick has been mentioned in gcc-patches
discussion of the S/390 case - which is unaffected by this patch), but
as noted in my previous message, affected libraries would have
problems with -mfpmath=sse anyway on 32-bit x86.
A (compilation) testcase is added to verify the required
correspondence of typedefs to FLT_EVAL_METHOD values. This test is
built with -fexcess-precision=standard to avoid any issues with GCC 7
on S/390 providing a more accurate FLT_EVAL_METHOD definition in the
default (no excess precision) mode. (This will also be usable to test
a fix for the recently reported bug about these typedefs on x86_64
-mfpmath=387, as architecture-specific tests can be added that
It is entirely possible that the fixed default makes some
architecture-specific versions of bits/mathdef.h semantically
equivalent to the default version and so no longer required. I don't
intend to investigate that separately from the refactoring I proposed
in <https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>, which
will create as few header variants as possible for each group of
definitions.
Tested (compilation only) with build-many-glibcs.py.
[BZ #20855]
* bits/mathdef.h (float_t): Define to float.
* math/test-flt-eval-method.c: New file.
* math/Makefile (tests): Add test-flt-eval-method.
(CFLAGS-test-flt-eval-method.c): New variable.
TS 18661-1 defines functions for manipulating the payloads of NaNs.
This patch implements the setpayload functions for glibc; these set a
number (pointed to by a function argument) to a quiet NaN with the
given payload, or to +0 if the given payload is not valid. The
implementations are structured to allow the substance of the
implementation to be shared with the setpayloadsig functions when
those are added.
The semantics in the TS are not entirely clear in the case where the
payload passed to the function is zero (see discussion on the WG14
reflector last month). This patch implements what seems the most
sensible interpretation, that -0 is never valid to give as the
payload, but +0 is valid in the case where the kind of NaN being
generated has its high mantissa bit set so payload 0 is actually
possible in such a NaN.
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(setpayload): New declaration.
* math/Versions (setpayload): New libm symbol at version
GLIBC_2.25.
(setpayloadf): Likewise.
(setpayloadl): Likewise.
* math/Makefile (libm-calls): Add s_setpayloadF.
* math/libm-test.inc (struct test_Ffp_b1_data): Rename to struct
test_Ff_b1_data.
(RUN_TEST_Ff_b1): New macro.
(RUN_TEST_LOOP_Ff_b1): Likewise.
(canonicalize_test_data): Update type.
(setpayload_test_data): New array.
(setpayload_test): New function.
(main): Call setpayload_test.
* manual/arith.texi (FP Bit Twiddling): Document setpayload,
setpayloadf and setpayloadl.
* manual/libm-err-tab.pl: Update comment on interfaces without
ulps tabulated.
* sysdeps/ieee754/dbl-64/s_setpayload.c: New file.
* sysdeps/ieee754/dbl-64/s_setpayload_main.c: Likewise.
* sysdeps/ieee754/dbl-64/wordsize-64/s_setpayload_main.c:
Likewise.
* sysdeps/ieee754/flt-32/s_setpayloadf.c: Likewise.
* sysdeps/ieee754/flt-32/s_setpayloadf_main.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_setpayloadl.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_setpayloadl_main.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_setpayloadl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_setpayloadl_main.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_setpayloadl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_setpayloadl_main.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-setpayload.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
setpayload.
(CFLAGS-nldbl-setpayload.c): New variable.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
This patch refactors some type-generic libm macros, in both math.h and
math_private.h, to be based on a common __MATH_TG macro rather than
all replicating similar logic to choose a function to call based on
the type of the argument.
This should serve to illustrate what I think float128 support for such
macros should look like: common macros such as __MATH_TG may need
different definitions depending on whether float128 is supported in
glibc, so that the individual macros themselves do not need
conditionals on float128 support.
Tested for x86_64, x86, mips64 and powerpc.
* math/math.h (__MATH_TG): New macro.
[__USE_ISOC99] (fpclassify): Define using __MATH_TG.
[__USE_ISOC99] (signbit): Likewise.
[__USE_ISOC99] (isfinite): Likewise.
[__USE_ISOC99] (isnan): Likewise.
[__USE_ISOC99] (isinf): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (issignaling): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (__MATH_EVAL_FMT2): New macro.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (iseqsig): Define using
__MATH_TG and __MATH_EVAL_FMT2.
* sysdeps/generic/math_private.h (fabs_tg): Define using
__MATH_TG.
* sysdeps/ieee754/ldbl-128ibm/bits/iscanonical.h
[!__NO_LONG_DOUBLE_MATH] (__iscanonicalf): New macro.
[!__NO_LONG_DOUBLE_MATH] (__iscanonical): Likewise.
[!__NO_LONG_DOUBLE_MATH] (iscanonical): Define using __MATH_TG.
* sysdeps/ieee754/ldbl-96/bits/iscanonical.h (__iscanonicalf): New
macro.
(__iscanonical): Likewise.
(iscanonical): Define using __MATH_TG.
TS 18661-1 defines SNAN macros for signaling NaN values, suitable for
use in static initializers. This patch adds them to glibc's <math.h>
(provided you are building with GCC 3.3 or later; no attempt is made
to provide any kind of nonconforming fallback for older compilers
without the __builtin_nans functions).
Tested for x86_64 and x86.
* math/math.h
[__GLIBC_USE (IEC_60559_BFP_EXT) && __GNUC_PREREQ (3, 3)] (SNANF):
New macro.
[__GLIBC_USE (IEC_60559_BFP_EXT) && __GNUC_PREREQ (3, 3)] (SNAN):
Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT) && __GNUC_PREREQ (3, 3)] (SNANL):
Likewise.
* manual/arith.texi (Infinity and NaN): Document SNANF, SNAN and
SNANL.
* math/test-double.h (snan_value_MACRO): New macro.
* math/test-float.h (snan_value_MACRO): Likewise.
* math/test-ldouble.h (snan_value_MACRO): Likewise.
* math/libm-test.inc (issignaling_test_data): Add tests of
snan_value_MACRO.
The test math/test-nan-overflow uses malloc without including
stdlib.h. On -Os builds for i486 the header inclusion order
is altered enough that the test fails to build because of the
warning which is turned into an error.
The obvious fix is to include stdlib.h since malloc is being
used directly.
TS 18661-1 defines canonicalize functions to produce a canonical
version of a floating-point representation. This patch implements
these functions for glibc.
As with the iscanonical macro, these functions are oriented to the
decimal floating-point case, where some values have both canonical and
noncanonical representations. However, the functions have a return
value that says whether they succeeded in storing a canonical result;
thus, they can fail for the case of an invalid representation (while
still not making any particular choice from among multiple equally
canonical valid representations of the same value). Since no
floating-point formats in glibc actually have noncanonical valid
representations, a type-generic implementation of these functions can
be used that expects iscanonical to return 0 only for invalid
representations. Now that iscanonical is used within libm.so,
libm_hidden_proto / libm_hidden_def are added for __iscanonicall.
The definition of these functions is intended to correspond to a
convertFormat operation to the same floating-point format. Thus, they
convert signaling NaNs to quiet NaNs, raising the "invalid" exception.
Such a conversion "should" produce "the canonical version of that
signaling NaN made quiet".
libm-test.inc is made to check NaN payloads for the output of these
functions, a new feature (at some point manipulation functions such as
fabs and copysign should have tests added that verify payload
preservation for them). As however some architectures may not follow
the recommended practice of preserving NaN payloads when converting a
signaling NaN to quiet, a new math-tests.h macro
SNAN_TESTS_PRESERVE_PAYLOAD is added, and defined to 0 for non-NAN2008
MIPS; any other architectures seeing test failures for lack of payload
preservation in this case should also define this macro to 0. (If any
cases arise where the sign isn't preserved either, those should have a
similar macro added.)
The ldbl-96 and ldbl-128ibm tests of iscanonical are renamed and
adapted to test canonicalizel as well on the same representations.
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(canonicalize): New declaration.
* math/Versions (canonicalize): New libm symbol at version
GLIBC_2.25.
(canonicalizef): Likewise.
(canonicalizel): Likewise.
* math/Makefile (gen-libm-calls): Add s_canonicalizeF.
* math/s_canonicalize_template.c: New file.
* math/libm-test.inc: Update comment on functions tested and
testing of NaN payloads.
(TEST_NAN_PAYLOAD): New macro.
(NO_TEST_INLINE): Update value.
(XFAIL_TEST): Likewise.
(ERRNO_UNCHANGED): Likewise.
(ERRNO_EDOM): Likewise.
(ERRNO_ERANGE): Likewise.
(IGNORE_RESULT): Likewise.
(NON_FINITE): Likewise.
(TEST_SNAN): Likewise.
(NO_TEST_MATHVEC): Likewise.
(TEST_NAN_PAYLOAD_CANONICALIZE): New macro.
(check_float_internal): Check NaN payloads if TEST_NAN_PAYLOAD.
(struct test_Ffp_b1_data): New type.
(RUN_TEST_Ffp_b1): New macro.
(RUN_TEST_LOOP_Ffp_b1): Likewise.
(canonicalize_test_data): New array.
(canonicalize_test): New function.
(main): Call canonicalize_test.
* manual/arith.texi (FP Bit Twiddling): Document canonicalize,
canonicalizef and canonicalizel.
* manual/libm-err-tab.pl: Update comment on interfaces without
ulps tabulated.
* sysdeps/ieee754/ldbl-opt/nldbl-canonicalize.c: New file.
* sysdeps/ieee754/ldbl-opt/s_canonicalizel.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
canonicalize.
(CFLAGS-nldbl-canonicalize.c): New variable.
* sysdeps/ieee754/ldbl-128ibm/test-iscanonical-ldbl-128ibm.c: Move
to ...
* sysdeps/ieee754/ldbl-128ibm/test-canonical-ldbl-128ibm.c:
... here.
(do_test): Also test canonicalizel.
* sysdeps/ieee754/ldbl-128ibm/Makefile (tests): Change
test-iscanonical-ldbl-128ibm to test-canonical-ldbl-128ibm.
* sysdeps/ieee754/ldbl-128ibm/include/bits/iscanonical.h: New
file.
* sysdeps/ieee754/ldbl-128ibm/s_iscanonicall.c (__iscanonicall):
Use libm_hidden_def.
* sysdeps/ieee754/ldbl-96/test-iscanonical-ldbl-96.c: Move to ...
* sysdeps/ieee754/ldbl-96/test-canonical-ldbl-96.c: ... here.
(do_test): Also test canonicalizel.
* sysdeps/ieee754/ldbl-96/Makefile (tests): Change
test-iscanonical-ldbl-96 to test-canonical-ldbl-96.
* sysdeps/ieee754/ldbl-96/include/bits/iscanonical.h: New file.
* sysdeps/ieee754/ldbl-96/s_iscanonicall.c (__iscanonicall): Use
libm_hidden_def.
* sysdeps/generic/math-tests.h (SNAN_TESTS_PRESERVE_PAYLOAD): New
macro.
* sysdeps/mips/math-tests.h [__mips_hard_float && !__mips_nan2008]
(SNAN_TESTS_PRESERVE_PAYLOAD): Likewise.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
It is still common to include system header files in an extern "C"
block. This means that exiting <math.h>'s own extern "C" block
is not sufficient to get back to C++ mode. Use an extern "C++"
wrapper instead.
TS 18661-1 defines functions for manipulating the payloads of NaNs.
This patch implements the getpayload functions for glibc; these
extract the NaN payload (from an argument passed as a pointer, for
which corresponding libm-test support is added) and return it in the
same floating-point type. The return value of these functions is
unspecified for non-NaN arguments; the patch does the simplest thing
to implement, which is that the functions do not check whether the
argument is a NaN and just treat the relevant bits of the
representation as a payload regardless. A conversion from integer to
floating-point is used to produce the required return value, except in
the ldbl-128 case; as 128-bit integers are not supported for all
configurations using ldbl-128, the code constructs the required
floating-point representation of the return value directly instead.
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(getpayload): New declaration.
* math/Versions (getpayload): New libm symbol at version
GLIBC_2.25.
(getpayloadf): Likewise.
(getpayloadl): Likewise.
* math/Makefile (libm-calls): Add s_getpayloadF.
* math/libm-test.inc: Include <nan-high-order-bit.h>.
(struct test_f_f_data): Add comment.
(RUN_TEST_fp_f): New macro.
(RUN_TEST_LOOP_fp_f): Likewise.
(getpayload_test_data): New array.
(getpayload_test): New function.
(main): Call getpayload_test.
* math/gen-libm-test.pl (parse_args): Handle 'p' in argument
descriptor.
* manual/arith.texi (FP Bit Twiddling): Document getpayload,
getpayloadf and getpayloadl.
* manual/libm-err-tab.pl: Update comment on interfaces without
ulps tabulated.
* sysdeps/ieee754/dbl-64/s_getpayload.c: New file.
* sysdeps/ieee754/dbl-64/wordsize-64/s_getpayload.c: Likewise.
* sysdeps/ieee754/flt-32/s_getpayloadf.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_getpayloadl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_getpayloadl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_getpayloadl.c: Likewise.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
Some of the complex arithmetic functions have the following pattern:
in some piece of code, one part of the input (real or imaginary,
depending on the function) is either infinite or NaN. Part of the
result is to be set to NaN in either case, and FE_INVALID raised only
if the relevant part of the input was infinite.
In such a case, there is no actual need for the conditional on the
type of the input, since subtracting the relevant part of the input
from itself will produce a NaN, with FE_INVALID only if the relevant
part of the input was infinite. This simplifies the code, and as a
quality-of-implementation matter also improves things by propagating
NaN payloads. (Right now these functions always raise FE_INVALID for
signaling NaN arguments because of the call to fpclassify - at least
unless glibc is built with -Os - but if fpclassify moves to using
integer arithmetic in future, doing arithmetic on the NaN argument
also ensures an exception for sNaNs.)
Tested for x86_64 and x86.
* math/s_ccosh_template.c (M_DECL_FUNC (__ccosh)): Instead of
raising FE_INVALID with feraisexcept in case where part of
argument is infinite, subtract that part of argument from itself.
* math/s_cexp_template.c (M_DECL_FUNC (__cexp)): Likewise.
* math/s_csin_template.c (M_DECL_FUNC (__csin)): Likewise.
* math/s_csinh_template.c (M_DECL_FUNC (__csinh)): Likewise.
This patch adds more tests of totalorder for finite inputs.
Tested for x86_64, x86, mips64 and powerpc.
* math/libm-test.inc (totalorder_test_data): Add more tests.
TS 18661-1 defines totalorder functions implementing the totalOrder
comparison operation from IEEE 754-2008. This patch implements these
functions for glibc, including the type-generic macro in <tgmath.h>.
(The totalordermag functions will be added in a separate patch.)
The description of the totalOrder operation is complicated. However,
for IEEE interchange binary formats and the preferred quiet NaN
convention, what that complicated description means is that you
interpret the representation as a sign-magnitude integer (with -0
coming before +0) and do a <= comparison on that interpretation. For
finite values and infinities the ordering of the sign-magnitude
integers is just the same as the ordering of floating-point values, so
this extends that to all representations. (Different representations
of the same floating-point value - which includes same quantum in the
decimal case - must still be considered equal by this operation, but
that issue doesn't arise for IEEE interchange binary formats.) So the
complications are:
* When MIPS quiet NaN conventions are in use, the representation of
NaNs needs adjusting before making such an integer comparison. This
patch does this adjustment only when both arguments are NaNs, as
there's no need for it if only one is a NaN, and as long as both are
NaNs you can just flip the relevant bits without any problems from
this turning a NaN into an infinity.
* For the m68k version of ldbl-96, where the high mantissa bit is
"don't care" for infinities and NaNs, representations where it
differs must compare the same. Note: although the testcase for this
compiles, I have not actually tested on m68k.
* For ldbl-128ibm, the low part must be ignored when the high part is
NaN, and low parts of +0 and -0 must be considered the same whatever
the high part.
The new tests in libm-test.inc are the first tests there specifying
particular payloads for input NaNs. Separate tests are also added for
the ldbl-96 and ldbl-128ibm special cases where there are different
representations of the same value that must compare equal (which can't
be covered in libm-test.inc as that only specifies values, not
representations).
Tested for x86_64, x86, mips64 and powerpc.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(totalorder): New declaration.
* math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder):
New macro.
* math/Versions (totalorder): New libm symbol at version
GLIBC_2.25.
(totalorderf): Likewise.
(totalorderl): Likewise.
* math/Makefile (libm-calls): Add s_totalorderF.
* math/gen-libm-test.pl (parse_args): Escape quotes in test name
string.
* math/libm-test.inc (PAYLOAD_DIG): New macro.
(qnan_value_pl): Likewise.
(snan_value_pl): Likewise.
(qnan_value): Define using qnan_value_pl.
(snan_value): Define using snan_value_pl.
(struct test_ff_i_data): Add comment about which tests use this
structure.
(RUN_TEST_ff_b): New macro.
(RUN_TEST_LOOP_ff_b): Likewise.
(totalorder_test_data): New array.
(totalorder_test): New function.
(main): Call totalorder_test.
* math/test-tgmath.c (NCALLS): Increase to 122.
(F(compile_test)): Call totalorder.
(F(totalorder)): New function.
* manual/arith.texi (FP Comparison Functions): Document
totalorder, totalorderf and totalorderl.
* manual/libm-err-tab.pl: Update comment on interfaces without
ulps tabulated.
* sysdeps/ieee754/dbl-64/s_totalorder.c: New file.
* sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Likewise.
* sysdeps/ieee754/flt-32/s_totalorderf.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_totalorderl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_totalorderl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c: Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add
totalorder.
(CFLAGS-nldbl-totalorder.c): New variable.
* sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c: New
file.
* sysdeps/ieee754/ldbl-128ibm/Makefile [$(subdir) = math] (tests):
Add test-totalorderl-ldbl-128ibm.
* sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c: New file.
* sysdeps/ieee754/ldbl-96/Makefile [$(subdir) = math] (tests): Add
test-totalorderl-ldbl-96.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
Some libm complex functions have code that computes M_NAN + M_NAN.
This is nonsensical; it's just equivalent to M_NAN, since it's a quiet
NaN (and the comments suggesting this raises an exception are
similarly wrong). This patch changes the code just to use M_NAN (and
removes the bogus comments). (Preferably, code should either
propagate an input NaN or do a computation that raises "invalid" and
generates a default NaN at the same time. There are various cases,
however, that currently raise "invalid" even for NaN inputs; I think
those are cases where "invalid" is optional in ISO C so a change to
whether it's raised would be OK, but they would still need more
careful consideration than the cases where such issues do not arise.)
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* math/s_ccosh_template.c (M_DECL_FUNC (__ccosh)): Use M_NAN
instead of M_NAN + M_NAN.
* math/s_csinh_template.c (M_DECL_FUNC (__csinh)): Likewise.
iseqsig, like other type-generic comparison macros, should behave like
a comparison operator in not removing excess range and precision from
its arguments (see C11 F.10.11). This patch implements this by making
definitions of iseqsig appropriately conditional on
__FLT_EVAL_METHOD__ (including support for TS 18661-3 values of that
macro), with a corresponding testcase (that failed for 32-bit x86 in
the absence of the math.h changes) being added. (Of course the
definitions may need reworking when float128 support is added, just as
with other type-generic macros.)
Tested for x86_64 and x86.
* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (iseqsig): Define
conditional on value of [__FLT_EVAL_METHOD__].
* math/test-iseqsig-excess-precision.c: New file.
* math/Makefile (tests): Add test-iseqsig-excess-precision.
Microblaze, nios2, and tile do not support FE_INVALID and thus
define feraiseexcept as a empty macro. Include math-private.h
to get such definition.
Checked with a build for microblaze, nios2, and tilepro.
* math/s_iseqsig_template.c: Include math-private.h.
TS 18661-1 adds an iseqsig type-generic comparison macro to <math.h>.
This macro is like the == operator except that unordered operands
result in the "invalid" exception and errno being set to EDOM.
This patch implements this macro for glibc. Given the need to set
errno, this is implemented with out-of-line functions __iseqsigf,
__iseqsig and __iseqsigl (of which the last only exists at all if long
double is ABI-distinct from double, so no function aliases or compat
support are needed). The present patch ignores excess precision
issues; I intend to deal with those in a followup patch. (Like
comparison operators, type-generic comparison macros should *not*
convert operands to their semantic types but should preserve excess
range and precision, meaning that for some argument types and values
of FLT_EVAL_METHOD, an underlying function should be called for a
wider type than that of the arguments.)
The underlying functions are implemented with the type-generic
template machinery. Comparing x <= y && x >= y is sufficient in ISO C
to achieve an equality comparison with "invalid" raised for unordered
operands (and the results of those two comparisons can also be used to
tell whether errno needs to be set). However, some architectures have
GCC bugs meaning that unordered comparison instructions are used
instead of ordered ones. Thus, a mechanism is provided for
architectures to use an explicit call to feraiseexcept to raise
exceptions if required. If your architecture has such a bug you
should add a fix-fp-int-compare-invalid.h header for it, with a
comment pointing to the relevant GCC bug report; if such a GCC bug is
fixed, that header's contents should have a __GNUC_PREREQ conditional
added so that the workaround can eventually be removed for that
architecture.
Tested for x86_64, x86, mips64, arm and powerpc.
* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (iseqsig): New
macro.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(__iseqsig): New declaration.
* math/s_iseqsig_template.c: New file.
* math/Versions (__iseqsigf): New libm symbol at version
GLIBC_2.25.
(__iseqsig): Likewise.
(__iseqsigl): Likewise.
* math/libm-test.inc (iseqsig_test_data): New array.
(iseqsig_test): New function.
(main): Call iseqsig_test.
* math/Makefile (gen-libm-calls): Add s_iseqsigF.
* manual/arith.texi (FP Comparison Functions): Document iseqsig.
* manual/libm-err-tab.pl: Update comment on interfaces without
ulps tabulated.
* sysdeps/generic/fix-fp-int-compare-invalid.h: New file.
* sysdeps/powerpc/fpu/fix-fp-int-compare-invalid.h: Likewise.
* sysdeps/x86/fpu/fix-fp-int-compare-invalid.h: Likewise.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
TS 18661-1 adds an iscanonical classification macro to <math.h>.
The motivation for this is decimal floating-point, where some values
have both canonical and noncanonical encodings. For IEEE binary
interchange formats, all encodings are canonical. For x86/m68k
ldbl-96, and for ldbl-128ibm, there are encodings that do not
represent any valid value of the type; although formally iscanonical
does not need to handle trap representations (and so could just always
return 1), it seems useful, and in line with the description in the TS
of "representations that are extraneous to the floating-point model"
as being non-canonical (as well as "redundant representations of some
or all of its values"), for it to detect those representations and
return 0 for them.
This patch adds iscanonical to glibc. It goes in a header
<bits/iscanonical.h>, included under appropriate conditions in
<math.h>. The default header version just evaluates the argument
(converted to its semantic type, though current GCC will probably
discard that conversion and any exceptions resulting from it) and
returns 1. ldbl-96 and ldbl-128ibm then have versions of the header
that call a function __iscanonicall for long double (the sizeof-based
tests will of course need updating for float128 support, like other
such type-generic macro implementations). The ldbl-96 version of
__iscanonicall has appropriate conditionals to reflect the differences
in the m68k version of that format (where the high mantissa bit may be
either 0 or 1 when the exponent is 0 or 0x7fff). Corresponding tests
for those formats are added as well. Other architectures do not have
any new functions added because just returning 1 is correct for all
their floating-point formats.
Tested for x86_64, x86, mips64 (to test the default macro version) and
powerpc.
* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Include
<bits/iscanonical.h>.
* bits/iscanonical.h: New file.
* math/s_iscanonicall.c: Likewise.
* math/Versions (__iscanonicall): New libm symbol at version
GLIBC_2.25.
* math/libm-test.inc (iscanonical_test_data): New array.
(iscanonical_test): New function.
(main): Call iscanonical_test.
* math/Makefile (headers): Add bits/iscanonical.h.
(type-ldouble-routines): Add s_iscanonicall.
* manual/arith.texi (Floating Point Classes): Document
iscanonical.
* manual/libm-err-tab.pl: Update comment on interfaces without
ulps tabulated.
* sysdeps/ieee754/ldbl-128ibm/bits/iscanonical.h: New file.
* sysdeps/ieee754/ldbl-128ibm/s_iscanonicall.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/test-iscanonical-ldbl-128ibm.c:
Likewise.
* sysdeps/ieee754/ldbl-128ibm/Makefile (tests): Add
test-iscanonical-ldbl-128ibm.
* sysdeps/ieee754/ldbl-96/bits/iscanonical.h: New file.
* sysdeps/ieee754/ldbl-96/s_iscanonicall.c: Likewise.
* sysdeps/ieee754/ldbl-96/test-iscanonical-ldbl-96.c: Likewise.
* sysdeps/ieee754/ldbl-96/Makefile: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
Floating-point classification macros are supposed to remove any excess
range or precision from their arguments. This patch fixes the
non-sNaN version of iszero to do so, by casting the argument to its
own type. (This will of course work only for standard-conforming
excess precision, not for what GCC does on 32-bit x86 by default where
the back end hides excess precision from the front end; the same
applies to most of the classification macros in that case, as showed
up when we made them use GCC built-in functions.)
(iseqsig will have the reverse issue, needing to ensure that when an
underlying function is used it's for a type wide enough not to remove
any excess precision, since comparison macros must not remove excess
precision.)
Tested for x86_64 and x86.
* math/math.h
[__GLIBC_USE (IEC_60559_BFP_EXT) && !__SUPPORT_SNAN__] (iszero):
Cast argument to its own type.
* math/test-iszero-excess-precision.c: New file.
* math/Makefile (tests): Add test-iszero-excess-precision.
(CFLAGS-test-iszero-excess-precision.c): New variable.
TS 18661-1 adds an iszero classification macro to <math.h>. This
patch implements it for glibc. There are no new underlying functions
in libm because the implementation uses fpclassify when sNaN support
is required and a direct comparison otherwise; any optimizations for
this macro should be done through adding __builtin_iszero in GCC and
using it in the header for suitable GCC versions, not through adding
other optimized inline or out-of-line versions to glibc.
Tested for x86_64 and x86.
* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (iszero): New
macro.
* math/libm-test.inc (iszero_test_data): New array.
(iszero_test): New function.
(main): Call iszero_test.
* manual/arith.texi (Floating Point Classes): Document iszero.
* manual/libm-err-tab.pl: Update comment on interfaces without
ulps tabulated.
TS 18661-1 adds an issubnormal classification macro to <math.h>. This
patch implements it for glibc. There are no new underlying functions
in libm because the implementation uses fpclassify; any optimizations
for this macro should be done through adding __builtin_subnormal in
GCC and using it in the header for suitable GCC versions, not through
adding other optimized inline or out-of-line versions to glibc.
The intended structure of the NEWS entry for <math.h> features from TS
18661-1 is like:
* New <math.h> features are added from TS 18661-1:2014:
- Nearest integer functions: roundeven, roundevenf, roundevenl.
- Comparison macros: iseqsig.
- Classification macros: iscanonical, issubnormal, iszero.
(that is, following the grouping of interfaces in TS 18661-1:2014,
with any group where any interfaces are new in glibc 2.25 being listed
like that).
Tested for x86_64 and x86.
* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (issubnormal): New
macro.
* math/libm-test.inc (issubnormal_test_data): New array.
(issubnormal_test): New function.
* manual/arith.texi (Floating Point Classes): Document
issubnormal.
* manual/libm-err-tab.pl: Update comment on interfaces without
ulps tabulated.
This requires adding a macro to synthesize the call
to __strto*_nan. Since this is likely to be the only
usage ever for strto* functions in generated libm
calls, a dedicated macro is defined for it.
Use the GCC builtin instead. With the exception of the
files built from a template, they are unused. This
is preparation for making the s_nanF objects generated.
This one is a little more tricky since it is built both for
libm and libc, and exports multiple aliases.
To simplify aliasing, a new macro is introduced which handles
aliasing to two symbols. By default, it just applies
declare_mgen_alias to both target symbols.
Likewise, the makefile is tweaked a little to generate
templates for shared files too, and a new rule is added
to build m_*.c objects from the objpfx directory.
Verified there are no symbol or code changes using a script
to diff the *_ldexp* object files on s390x, aarch64, arm,
x86_64, and ppc64.
TS 18661-1 defines a type femode_t to represent the set of dynamic
floating-point control modes (such as the rounding mode and trap
enablement modes), and functions fegetmode and fesetmode to manipulate
those modes (without affecting other state such as the raised
exception flags) and a corresponding macro FE_DFL_MODE.
This patch series implements those interfaces for glibc. This first
patch adds the architecture-independent pieces, the x86 and x86_64
implementations, and the <bits/fenv.h> and ABI baseline updates for
all architectures so glibc keeps building and passing the ABI tests on
all architectures. Subsequent patches add the fegetmode and fesetmode
implementations for other architectures.
femode_t is generally an integer type - the same type as fenv_t, or as
the single element of fenv_t where fenv_t is a structure containing a
single integer (or the single relevant element, where it has elements
for both status and control registers) - except where architecture
properties or consistency with the fenv_t implementation indicate
otherwise. FE_DFL_MODE follows FE_DFL_ENV in whether it's a magic
pointer value (-1 cast to const femode_t *), a value that can be
distinguished from valid pointers by its high bits but otherwise
contains a representation of the desired register contents, or a
pointer to a constant variable (the powerpc case; __fe_dfl_mode is
added as an exported constant object, an alias to __fe_dfl_env).
Note that where architectures (that share a register between control
and status bits) gain definitions of new floating-point control or
status bits in future, the implementations of fesetmode for those
architectures may need updating (depending on whether the new bits are
control or status bits and what the implementation does with
previously unknown bits), just like existing implementations of
<fenv.h> functions that take care not to touch reserved bits may need
updating when the set of reserved bits changes. (As any new bits are
outside the scope of ISO C, that's just a quality-of-implementation
issue for supporting them, not a conformance issue.)
As with fenv_t, femode_t should properly include any software DFP
rounding mode (and for both fenv_t and femode_t I'd consider that
fragment of DFP support appropriate for inclusion in glibc even in the
absence of the rest of libdfp; hardware DFP rounding modes should
already be included if the definitions of which bits are status /
control bits are correct).
Tested for x86_64, x86, mips64 (hard float, and soft float to test the
fallback version), arm (hard float) and powerpc (hard float, soft
float and e500). Other architecture versions are untested.
* math/fegetmode.c: New file.
* math/fesetmode.c: Likewise.
* sysdeps/i386/fpu/fegetmode.c: Likewise.
* sysdeps/i386/fpu/fesetmode.c: Likewise.
* sysdeps/x86_64/fpu/fegetmode.c: Likewise.
* sysdeps/x86_64/fpu/fesetmode.c: Likewise.
* math/fenv.h: Update comment on inclusion of <bits/fenv.h>.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fegetmode): New function
declaration.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetmode): Likewise.
* bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New
typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/m68k/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (__fe_dfl_mode): New variable
declaration.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/tile/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* manual/arith.texi (FE_DFL_MODE): Document macro.
(fegetmode): Document function.
(fesetmode): Likewise.
* math/Versions (fegetmode): New libm symbol at version
GLIBC_2.25.
(fesetmode): Likewise.
* math/Makefile (libm-support): Add fegetmode and fesetmode.
(tests): Add test-femode and test-femode-traps.
* math/test-femode-traps.c: New file.
* math/test-femode.c: Likewise.
* sysdeps/powerpc/fpu/fenv_const.c (__fe_dfl_mode): Declare as
alias for __fe_dfl_env.
* sysdeps/powerpc/nofpu/fenv_const.c (__fe_dfl_mode): Likewise.
* sysdeps/powerpc/powerpc32/e500/nofpu/fenv_const.c
(__fe_dfl_mode): Likewise.
* sysdeps/powerpc/Versions (__fe_dfl_mode): New libm symbol at
version GLIBC_2.25.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
This is only used for the float and double variants.
Instead, just add it to the type specific list of files,
and remove all stubs, and remove the declaration from
math_private.h.
I verified x86_64, i486, ia64, m68k, and ppc64 build.
With the exception of those machines using the ldbl-opt in
an Implies file, this is a trivial transformation.
nextdownl is not subject to the non-trivial versioning rules
of the other generated functions, so to keep things simple,
it is handled as a one-off case in ldbl-opt to preserve the
existing behavior.
The only difference is the usage of math_narrow_eval when
building s_fdiml.c. This should be harmless for long double,
but I did observe some code generation changes on m68k, but
lack the resources to test it.
Likewise, to more easily support overriding symbol generation,
the aliasing macros are always conditionally defined on their
absence to reduce boilerplate.
I also ran builds for i486, ppc64, sparcv9, aarch64,
s390x and observed no changes to s_fdim* objects.
Convert cpow, clog, clog10, cexp, csqrt, and cproj functions
into generated templates. Note, ldbl-opt still retains
s_clog10l.c as the aliasing rules are non-trivial.
This patch has no function changes, except to
ensure the git history correctly tracks the
changes to convert the double version of these
functions into a templated version.
TS 18661-1 defines an fetestexceptflag function to test the exception
state saved in an fexcept_t object by fegetexceptflag.
This patch implements this function for glibc. Almost all
architectures save exception state in such a way that it can be
directly ANDed with exception flag bits, so rather than having lots of
fetestexceptflag implementations that all do the same thing, the math/
implementation is made to use this generic logic (which is also OK in
the fallback case where FE_ALL_EXCEPT is zero). The only architecture
that seems to need anything different is s390.
(fegetexceptflag and fesetexceptflag use abbreviated filenames
fgetexcptflg.c and fsetexcptflg.c. Because we are no longer concerned
by 14-character filename limits, fetestexceptflag uses the obvious
filename fetestexceptflag.c.)
The NEWS entry is intended to be expanded along the lines given in
<https://sourceware.org/ml/libc-alpha/2016-08/msg00356.html> when
fegetmode and fesetmode are added.
Tested for x86_64, x86, mips64 and powerpc.
* math/fetestexceptflag.c: New file.
* sysdeps/s390/fpu/fetestexceptflag.c: Likewise. Comment by
Stefan Liebler.
* math/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(fetestexceptflag): New function declaration.
* manual/arith.texi (fetestexceptflag): Document function.
* math/Versions (fetestexceptflag): New libm symbol at version
GLIBC_2.25.
* math/Makefile (libm-support): Add fetestexceptflag.
(tests): Add test-fetestexceptflag.
* math/test-fetestexceptflag.c: New file.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
This patch has no function changes, except to
ensure the git history correctly tracks the
changes to convert the double version of these
functions into a templated version.
This patch has no function changes, except to
ensure the git history correctly tracks the
changes to convert the double version of these
functions into a templated version.
A number of files share identical code for the
mul_split function.
This moves the duplicated function mul_split into its
own header, and refactors the fma usage into a single
selection macro. Likewise, mul_split when used by a
long double implementation is renamed mul_splitl for
clarity.
This patch has no function changes, except to
ensure the git history correctly tracks the
changes to convert the double version of these
functions into a templated version.
This defines a new classes of libm objects. The
<func>_template.c file which is used in conjunction
with the new makefile hooks to derive variants for
each type supported by the target machine.
The headers math-type-macros-TYPE.h are used to supply
macros to a common implementation of a function in
a file named FUNC_template.c and glued togethor via
a generated file matching existing naming in the
build directory.
This has the properties of preserving the existing
override mechanism and not requiring any arcane
build system twiddling. Likewise, it enables machines
to override these files without any additional work.
I have verified the built objects for ppc64, x86_64,
alpha, arm, and m68k do not change in any meaningful
way with these changes using the Fedora cross toolchains.
I have verified the x86_64 and ppc64 changes still run.
TS 18661-1 defines an fesetexcept function for setting floating-point
exception flags without the side-effect of causing enabled traps to be
taken.
This patch series implements this function for glibc. The present
patch adds the fallback stub implementation, x86 and x86_64
implementations, documentation, tests and ABI baseline updates. The
remaining patches, some of them untested, add implementations for
other architectures. The implementations generally follow those of
the fesetexceptflag function.
As for fesetexceptflag, the approach taken for architectures where
setting flags causes enabled traps to be taken is to set the flags
(and potentially cause traps) rather than refusing to set the flags
and returning an error. Since ISO C and TS 18661 provide no way to
enable traps, this is formally in accordance with the standards.
The NEWS entry should be considered a placeholder, since this patch
series is intended to be followed by further such series adding other
TS 18661-1 features, so that the NEWS entry would end up looking more
like
* New <fenv.h> features from TS 18661-1:2014 are added to libm: the
fesetexcept, fetestexceptflag, fegetmode and fesetmode functions,
the femode_t type and the FE_DFL_MODE macro.
with hopefully more such entries for other features, rather than
having an entry for a single function in the end.
I believe we have consensus for adding TS 18661-1 interfaces as per
<https://sourceware.org/ml/libc-alpha/2016-06/msg00421.html>.
Tested for x86_64, x86, mips64 (hard float, and soft float to test the
fallback version), arm (hard float) and powerpc (hard float, soft
float and e500).
* math/fesetexcept.c: New file.
* sysdeps/i386/fpu/fesetexcept.c: Likewise.
* sysdeps/x86_64/fpu/fesetexcept.c: Likewise.
* math/fenv.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetexcept): New function
declaration.
* manual/arith.texi (fesetexcept): Document function.
* math/Versions (fesetexcept): New libm symbol at version
GLIBC_2.25.
* math/Makefile (libm-support): Add fesetexcept.
(tests): Add test-fesetexcept and test-fesetexcept-traps.
* math/test-fesetexcept.c: New file.
* math/test-fesetexcept-traps.c: Likewise.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
ISO C allows feraiseexcept to raise "inexact", in addition to the
requested exceptions, when requested to raise "overflow" or
"underflow". Testing on ARM and PowerPC e500 (where glibc's
feraiseexcept has this property) showed that the new test-fexcept test
failed to allow for this; this patch fixes it, by wrapping
feraiseexcept to clear FE_INEXACT if implicitly raised and not raised
before the call. (It would also be possible to do this with
fesetexcept, which always affects exactly the requested flags, but
this patch avoids making this fix depend on the fesetexcept changes.)
Tested for x86_64, x86, arm and e500.
* math/test-fexcept.c (feraiseexcept_exact): New function.
(test_set): Call feraiseexcept_exact instead of feraiseexcept.
(test_except): Likewise.
I noticed that there was no meaningful test coverage for
fegetexceptflag and fesetexceptflag (one test ensures that calls to
them compile and link, but nothing to verify they work correctly).
This patch adds tests for these functions.
fesetexceptflag is meant to set the relevant exception flag bits to
the saved state without causing enabled traps to be taken. On some
architectures, it is not possible to set exception flag bits without
causing enabled traps to occur. Such architectures need to define
EXCEPTION_SET_FORCES_TRAP to 1 in their math-tests.h, as is done in
this patch for powerpc. x86 avoids needing to define this because the
traps resulting from setting exception bits don't occur until the next
floating-point operation or fwait instruction.
Tested for x86_64, x86 and powerpc. Note that test-fexcept fails for
powerpc because of a pre-existing bug in fesetexceptflag for powerpc,
which I'll fix separately.
* math/test-fexcept-traps.c: New file.
* math/test-fexcept.c: Likewise.
* math/Makefile (tests): Add test-fexcept and test-fexcept-traps.
* sysdeps/generic/math-tests.h (EXCEPTION_SET_FORCES_TRAP): New
macro.
* sysdeps/powerpc/math-tests.h [!__NO_FPRS__]
(EXCEPTION_SET_FORCES_TRAP): Likewise.
sparc32 passes floating point values in the integer registers. VIS3
instructions gives access to the movwtos instruction to directly
transfer a value from an integer register to a floating point register.
Therefore it makes sense to provide a VIS3 version consisting in the
generic version compiled with -mvis3.
Changelog:
* math/s_fdim.c: Avoid alias renamed.
* math/s_fdimf.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile
[$(subdir) = math && $(have-as-vis3) = yes] (libm-sysdep_routines):
Add s_fdimf-vis3, s_fdim-vis3.
(CFLAGS-s_fdimf-vis3.c): New. Set to -Wa,-Av9d -mvis3.
(CFLAGS-s_fdim-vis3.c): Likewise.
sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim-vis3.c: New file.
sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim.c: Likewise.
When bootstrapping float128, this exposed a number of areas where
the L suffix is incorrectly applied to simple expressions when it
should be applied to each constant in the expression.
In order to stave off more macros in libm-test.inc, apply_lit is
made slightly more intelligent. It will now split expressions
based on space characters, and attempt to apply LIT() to each
token.
Having done this, there are numerous spacing issues within
libm-test.inc which have been fixed.
The above is problematic when the L real suffix is not the most
expressive modifier, and the compiler complains (i.e ppc64) or
silently truncates a value (i.e ppc64).
math.h has a comment about definitions from <bits/mathdef.h>. This
comment is in the wrong place in math.h, far below the inclusion of
<bits/mathdef.h>. It was originally above the inclusion, but the
inclusion was moved by
1998-11-05 Ulrich Drepper <drepper@cygnus.com>
* math/math.h: Unconditionally include bits/mathdef.h. Declare
long double functions only if __NO_LONG_DOUBLE_MATH is not
defined.
[...]
without moving the comment. Furthermore, the comment refers
incorrectly to FLT_EVAL_METHOD and DECIMAL_DIG, which are actually
<float.h> macros, and INFINITY, which is in <bits/inf.h>.
This patch moves the comment back above the include it refers to and
removes the description of macros not defined by the header.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* math/math.h: Move comment about <bits/mathdef.h> definitions
above inclusion of <bits/mathdef.h>. Do not mention
FLT_EVAL_METHOD, INFINITY or DECIMAL_DIG in that comment.
When libm functions return a NaN: if it is for NaN input, it should be
computed from that input (e.g. adding it to itself), so that payloads
are propagated and signaling NaNs quieted, while if it is for non-NaN
input, it should be produced by a computation such as
(x - x) / (x - x), which raises "invalid" at the same time as
producing an appropriate NaN, so avoiding any need for a call to
feraiseexcept.
Various libm functions, however, call __nan ("") (or __nanf or __nanl)
to determine the NaN to return, together with using feraiseexcept
(FE_INVALID) to raise the exception. sysdeps/generic/math_private.h
has an optimization for those functions with constant "" argument so
this doesn't actually involve a call to the __nan function, but it is
still not the preferred approach for producing NaNs. (The optimized
code also always uses the NAN macro, i.e. produces a default NaN for
float converted to whatever the target type is, and on some
architectures that may not be the same as the preferred default NaN
for double or long double.)
This patch fixes the scalb functions to use the conventional method of
generating NaNs and raising "invalid" with an appropriate
computation. (Most instances of this issue are in the complex
functions, where it can more readily be fixed once they have been made
type-generic and so only a third as many places need fixing. Some of
the complex functions use __nan ("") + __nan (""), where the addition
serves no purpose whatsoever.)
Tested for x86_64 and x86.
* math/e_scalb.c: Do not include <fenv.h>.
(invalid_fn): Do calculation resulting in NaN instead of raising
FE_INVALID and returning a NaN explicitly.
* math/e_scalbf.c: Do not include <fenv.h>.
(invalid_fn): Do calculation resulting in NaN instead of raising
FE_INVALID and returning a NaN explicitly.
* math/e_scalbl.c: Do not include <fenv.h>.
(invalid_fn): Do calculation resulting in NaN instead of raising
FE_INVALID and returning a NaN explicitly.
My __STDC_WANT_IEC_60559_BFP_EXT__ patch omitted to update the
conditions on the nextup and nextdown type-generic macros in
<tgmath.h>. This patch updates those conditions accordingly. (As
glibc doesn't currently have an exp10 type-generic macro, no such
changes are needed relating to __STDC_WANT_IEC_60559_FUNCS_EXT__;
adding such a type-generic macro would be a new feature.)
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch). Committed.
* math/tgmath.h (nextdown): Define if
[__GLIBC_USE (IEC_60559_BFP_EXT)], not if [__USE_GNU].
(nextup): Likewise.
This patch implements support for the
__STDC_WANT_IEC_60559_FUNCS_EXT__ feature test macro, following the
__GLIBC_USE approach used for other ISO C feature test macros.
Currently this only affects the exp10 functions (which glibc has had
for a long time).
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* bits/libc-header-start.h (__GLIBC_USE_IEC_60559_FUNCS_EXT): New
macro.
* include/features.h (__STDC_WANT_IEC_60559_FUNCS_EXT__):
Document.
* manual/creature.texi (__STDC_WANT_IEC_60559_FUNCS_EXT__):
Document macro.
* manual/math.texi (exp10): Document as ISO from TS 18661-4:2015.
(exp10f): Likewise.
(exp10l): Likewise.
* math/bits/mathcalls.h (exp10): Declare if
[__GLIBC_USE (IEC_60559_FUNCS_EXT)], not [__USE_GNU].
This patch implements support for the __STDC_WANT_IEC_60559_BFP_EXT__
feature test macro from ISO/IEC 18661-1:2014, following the
__GLIBC_USE approach now used for __STDC_WANT_LIB_EXT2__. For this
macro, the relevant consideration is whether it is defined or
undefined when an affected header is included (not what its value is
if defined, and not whether it's defined or undefined when any other
unaffected system header is included).
Currently this macro only affects the issignaling macro and the nextup
and nextdown functions (so they can be enabled by defining this macro,
not just by defining _GNU_SOURCE as previously). Any further features
from this TS added in future would also be conditioned on this macro.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* bits/libc-header-start.h (__GLIBC_USE_IEC_60559_BFP_EXT): New
macro.
* include/features.h (__STDC_WANT_IEC_60559_BFP_EXT__): Document.
* manual/arith.texi (issignaling): Document as ISO from TS
18661-1:2014.
(nextup): Likewise.
(nextupf): Likewise.
(nextupl): Likewise.
(nextdown): Likewise.
(nextdownf): Likewise.
(nextdownl): Likewise.
* manual/creature.texi (__STDC_WANT_IEC_60559_BFP_EXT__): Document
macro.
* math/math.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
(issignaling): Define if [__GLIBC_USE (IEC_60559_BFP_EXT)], not
[__USE_GNU].
* math/bits/mathcalls.h (nextdown): Declare if
[__GLIBC_USE (IEC_60559_BFP_EXT)], not [__USE_GNU].
(nextup): Likewise.
(__issignaling): Likewise.
While trying to convert the _Complex function wrappers
into a single generic implementation, a few minor
variations between identical versions emerged.
In order to support more types, the Makefile needs a few bits
shuffled.
F is explictly used as a placeholder to substitute for the
appropriate type suffix. This removes the need to demangle
_r suffixed objects.
The variable libm-compat-calls is added to house any objects which
are only built to provide compat symbols within libm. That is,
no newly added type should ever attempt building these. Note,
k_standard* files have been added there. By consensus they are
deprecated; in practice, we haven't gotten there yet.
New types would be added as noted in the comments preceding
type-TYPE-{suffix,routines,yes} variables. However, some manual
additions will still need to be done to add appropriate flags
when building the various variants of libm-test.c for a new type.
Likewise, test-ildoubl is renamed test-ildouble for consistency's
sake.
During the sincos consolidation I made two mistakes, one was a logical
error due to which cos(0x1.8475e5afd4481p+0) returned
sin(0x1.8475e5afd4481p+0) instead.
The second issue was an error in negating inputs for the correct
quadrants for sine. I could not find a suitable test case for this
despite running a program to search for such an input for a couple of
hours.
Following patch fixes both issues. Tested on x86_64. Thanks to Matt
Clay for identifying the issue.
[BZ #20357]
* sysdeps/ieee754/dbl-64/s_sin.c (sloww): Fix up condition
to call __mpsin/__mpcos and to negate values.
* math/auto-libm-test-in: Add test.
* math/auto-libm-test-out: Regenerate.
As discussed in
<https://sourceware.org/ml/libc-alpha/2016-05/msg00577.html>, TS
18661-1 disallows ceil, floor, round and trunc functions from raising
the "inexact" exception, in accordance with general IEEE 754 semantics
for when that exception is raised. Fixing this for x87 floating point
is more complicated than for the other versions of these functions,
because they use the frndint instruction that raises "inexact" and
this can only be avoided by saving and restoring the whole
floating-point environment.
As I noted in
<https://sourceware.org/ml/libc-alpha/2016-06/msg00128.html>, I have
now implemented a GCC option -fno-fp-int-builtin-inexact for GCC 7,
such that GCC will inline these functions on x86, without caring about
"inexact", when the default -ffp-int-builtin-inexact is in effect.
This allows users to get optimized code depending on the options they
pass to the compiler, while making the out-of-line functions follow TS
18661-1 semantics and avoid "inexact".
This patch duly fixes the out-of-line trunc function implementations
to avoid "inexact", in the same way as the nearbyint implementations.
I do not know how the performance of implementations such as these
based on saving the environment and changing the rounding mode
temporarily compares to that of the C versions or SSE 4.1 versions (of
course, for 32-bit x86 SSE implementations still need to get the
return value in an x87 register); it's entirely possible other
implementations could be faster in some cases.
Tested for x86_64 and x86.
[BZ #15479]
* sysdeps/i386/fpu/s_trunc.S (__trunc): Save and restore
floating-point environment rather than just control word.
* sysdeps/i386/fpu/s_truncf.S (__truncf): Likewise.
* sysdeps/i386/fpu/s_truncl.S (__truncl): Save and restore
floating-point environment, with "invalid" exceptions merged in,
rather than just control word.
* sysdeps/x86_64/fpu/s_truncl.S (__truncl): Likewise.
* math/libm-test.inc (trunc_test_data): Do not allow spurious
"inexact" exceptions.
As discussed in
<https://sourceware.org/ml/libc-alpha/2016-05/msg00577.html>, TS
18661-1 disallows ceil, floor, round and trunc functions from raising
the "inexact" exception, in accordance with general IEEE 754 semantics
for when that exception is raised. Fixing this for x87 floating point
is more complicated than for the other versions of these functions,
because they use the frndint instruction that raises "inexact" and
this can only be avoided by saving and restoring the whole
floating-point environment.
As I noted in
<https://sourceware.org/ml/libc-alpha/2016-06/msg00128.html>, I have
now implemented a GCC option -fno-fp-int-builtin-inexact for GCC 7,
such that GCC will inline these functions on x86, without caring about
"inexact", when the default -ffp-int-builtin-inexact is in effect.
This allows users to get optimized code depending on the options they
pass to the compiler, while making the out-of-line functions follow TS
18661-1 semantics and avoid "inexact".
This patch duly fixes the out-of-line floor function implementations
to avoid "inexact", in the same way as the nearbyint implementations.
I do not know how the performance of implementations such as these
based on saving the environment and changing the rounding mode
temporarily compares to that of the C versions or SSE 4.1 versions (of
course, for 32-bit x86 SSE implementations still need to get the
return value in an x87 register); it's entirely possible other
implementations could be faster in some cases.
Tested for x86_64 and x86.
[BZ #15479]
* sysdeps/i386/fpu/s_floor.S (__floor): Save and restore
floating-point environment rather than just control word.
* sysdeps/i386/fpu/s_floorf.S (__floorf): Likewise.
* sysdeps/i386/fpu/s_floorl.S (__floorl): Save and restore
floating-point environment, with "invalid" exceptions merged in,
rather than just control word.
* sysdeps/x86_64/fpu/s_floorl.S (__floorl): Likewise.
* math/libm-test.inc (floor_test_data): Do not allow spurious
"inexact" exceptions.
As discussed in
<https://sourceware.org/ml/libc-alpha/2016-05/msg00577.html>, TS
18661-1 disallows ceil, floor, round and trunc functions from raising
the "inexact" exception, in accordance with general IEEE 754 semantics
for when that exception is raised. Fixing this for x87 floating point
is more complicated than for the other versions of these functions,
because they use the frndint instruction that raises "inexact" and
this can only be avoided by saving and restoring the whole
floating-point environment.
As I noted in
<https://sourceware.org/ml/libc-alpha/2016-06/msg00128.html>, I have
now implemented a GCC option -fno-fp-int-builtin-inexact for GCC 7,
such that GCC will inline these functions on x86, without caring about
"inexact", when the default -ffp-int-builtin-inexact is in effect.
This allows users to get optimized code depending on the options they
pass to the compiler, while making the out-of-line functions follow TS
18661-1 semantics and avoid "inexact".
This patch duly fixes the out-of-line ceil function implementations to
avoid "inexact", in the same way as the nearbyint implementations.
I do not know how the performance of implementations such as these
based on saving the environment and changing the rounding mode
temporarily compares to that of the C versions or SSE 4.1 versions (of
course, for 32-bit x86 SSE implementations still need to get the
return value in an x87 register); it's entirely possible other
implementations could be faster in some cases.
Tested for x86_64 and x86.
[BZ #15479]
* sysdeps/i386/fpu/s_ceil.S (__ceil): Save and restore
floating-point environment rather than just control word.
* sysdeps/i386/fpu/s_ceilf.S (__ceilf): Likewise.
* sysdeps/i386/fpu/s_ceill.S (__ceill): Save and restore
floating-point environment, with "invalid" exceptions merged in,
rather than just control word.
* sysdeps/x86_64/fpu/s_ceill.S (__ceill): Likewise.
* math/libm-test.inc (ceil_test_data): Do not allow spurious
"inexact" exceptions.
The x86_64 and i386 versions of scalbl return sNaN for some cases of
sNaN input and are missing "invalid" exceptions for other cases. This
results from overly complicated code that either returns a NaN input,
or discards both inputs when one is NaN and loads a NaN from memory.
This patch fixes this by simplifying the code to add the arguments
when either one is NaN.
Tested for x86_64 and x86.
[BZ #20296]
* sysdeps/i386/fpu/e_scalbl.S (__ieee754_scalbl): Add arguments
when either argument is a NaN.
* sysdeps/x86_64/fpu/e_scalbl.S (__ieee754_scalbl): Likewise.
* math/libm-test.inc (scalb_test_data): Add sNaN tests.
This patch adds tests of sNaN inputs to more functions to
libm-test.inc. This covers the remaining real functions except for
scalb, where there's a bug to fix, and hypot pow fmin fmax, where
there are cases where a qNaN input does not result in a qNaN output
and so sNaN support according to TS 18661-1 is more of a new feature.
Tested for x86_64 and x86.
* math/libm-test.inc (snan_value_ld): New macro.
(isgreater_test_data): Add sNaN tests.
(isgreaterequal_test_data): Likewise.
(isless_test_data): Likewise.
(islessequal_test_data): Likewise.
(islessgreater_test_data): Likewise.
(isunordered_test_data): Likewise.
(nextafter_test_data): Likewise.
(nexttoward_test_data): Likewise.
(remainder_test_data): Likewise.
(remquo_test_data): Likewise.
(significand_test_data): Likewise.
* math/gen-libm-test.pl (%beautify): Add snan_value_ld.
TS 18661 adds nextup and nextdown functions alongside nextafter to provide
support for float128 equivalent to it. This patch adds nextupl, nextup,
nextupf, nextdownl, nextdown and nextdownf to libm before float128 support.
The nextup functions return the next representable value in the direction of
positive infinity and the nextdown functions return the next representable
value in the direction of negative infinity. These are currently enabled
as GNU extensions.
fdim suffers from double rounding on i386 because subtracting two
double values can produce an inexact long double value exactly half
way between two double values. This patch fixes this by creating an
i386-specific version of fdim - C, based on the generic version,
unlike the previous .S version - which sets the x87 precision control
to double precision for the subtraction and then restores it
afterwards. As noted in the comment added, there are no issues of
double rounding for subnormals (a case that setting precision control
does not address) because subtraction cannot produce an inexact result
in the subnormal range.
Tested for x86_64 and x86.
[BZ #20255]
* sysdeps/i386/fpu/s_fdim.c: New file. Based on math/s_fdim.c.
* math/libm-test.inc (fdim_test_data): Add another test.
Some architectures have their own versions of fdim functions, which
are missing errno setting (bug 6796) and may also return sNaN instead
of qNaN for sNaN input, in the case of the x86 / x86_64 long double
versions (bug 20256).
These versions are not actually doing anything that a compiler
couldn't generate, just straightforward comparisons / arithmetic (and,
in the x86 / x86_64 case, testing for NaNs with fxam, which isn't
actually needed once you use an unordered comparison and let the NaNs
pass through the same subtraction as non-NaN inputs). This patch
removes the x86 / x86_64 / powerpc versions, so that those
architectures use the generic C versions, which correctly handle
setting errno and deal properly with sNaN inputs. This seems better
than dealing with setting errno in lots of .S versions.
The i386 versions also return results with excess range and precision,
which is not appropriate for a function exactly defined by reference
to IEEE operations. For errno setting to work correctly on overflow,
it's necessary to remove excess range with math_narrow_eval, which
this patch duly does in the float and double versions so that the
tests can reliably pass on x86. For float, this avoids any double
rounding issues as the long double precision is more than twice that
of float. For double, double rounding issues will need to be
addressed separately, so this patch does not fully fix bug 20255.
Tested for x86_64, x86 and powerpc.
[BZ #6796]
[BZ #20255]
[BZ #20256]
* math/s_fdim.c: Include <math_private.h>.
(__fdim): Use math_narrow_eval on result.
* math/s_fdimf.c: Include <math_private.h>.
(__fdimf): Use math_narrow_eval on result.
* sysdeps/i386/fpu/s_fdim.S: Remove file.
* sysdeps/i386/fpu/s_fdimf.S: Likewise.
* sysdeps/i386/fpu/s_fdiml.S: Likewise.
* sysdeps/i386/i686/fpu/s_fdim.S: Likewise.
* sysdeps/i386/i686/fpu/s_fdimf.S: Likewise.
* sysdeps/i386/i686/fpu/s_fdiml.S: Likewise.
* sysdeps/powerpc/fpu/s_fdim.c: Likewise.
* sysdeps/powerpc/fpu/s_fdimf.c: Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_fdim.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_fdim.c: Likewise.
* sysdeps/x86_64/fpu/s_fdiml.S: Likewise.
* math/libm-test.inc (fdim_test_data): Expect errno setting on
overflow. Add sNaN tests.
The generic fdim implementations have unnecessarily complicated code,
using fpclassify to determine whether the arguments are NaNs,
subtracting NaNs if so and otherwise subtracting the non-NaN arguments
if not (x <= y), then using fpclassify on the result to see if it is
infinite.
This patch simplifies the code. Instead of handling NaNs separately,
it suffices to use an unordered comparison with islessequal (x, y) to
determine whether to return zero, and otherwise NaNs can go through
the same subtraction as non-NaN arguments; no explicit tests for NaN
are needed at all. Then, isinf instead of fpclassify can be used to
determine whether to set errno (in the normal non-overflow case, only
one classification will need to occur, unlike the three in the
previous code, of which two occurred even if returning zero, because
the result will not be infinite in the normal case).
The resulting logic is essentially the same as that in the powerpc
version, except that the powerpc version is missing errno setting and
uses <= not islessequal, so relying on
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58684>, the GCC bug that
unordered comparison instructions are wrongly used on powerpc for
ordered comparisons.
The compiled code for fdim and fdimf on x86_64 is less than half the
size of the previous code.
Tested for x86_64.
* math/s_fdim.c (__fdim): Use islessequal and isinf instead of
fpclassify.
* math/s_fdimf.c (__fdimf): Likewise.
* math/s_fdiml.c (__fdiml): Likewise.
The dbl-64 implementation of atan2, passed arguments (sNaN, qNaN),
fails to raise the "invalid" exception. This patch fixes it to add
both arguments, rather than just adding the second argument to itself,
in the case where the second argument is a NaN (which is checked for
before checking for the first argument being a NaN). sNaN tests for
atan2 are added, along with some qNaN tests I noticed were missing but
should have been there by analogy with other tests present.
Tested for x86_64 and x86.
[BZ #20252]
* sysdeps/ieee754/dbl-64/e_atan2.c (__ieee754_atan2): Add both
arguments when second argument is a NaN.
* math/libm-test.inc (atan2_test_data): Add sNaN tests and more
qNaN tests.
Various implementations of frexp functions return sNaN for sNaN
input. This patch fixes them to add such arguments to themselves so
that qNaN is returned.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #20250]
* sysdeps/i386/fpu/s_frexpl.S (__frexpl): Add non-finite input to
itself.
* sysdeps/ieee754/dbl-64/s_frexp.c (__frexp): Add non-finite or
zero input to itself.
* sysdeps/ieee754/dbl-64/wordsize-64/s_frexp.c (__frexp):
Likewise.
* sysdeps/ieee754/flt-32/s_frexpf.c (__frexpf): Likewise.
* sysdeps/ieee754/ldbl-128/s_frexpl.c (__frexpl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_frexpl.c (__frexpl): Likewise.
* sysdeps/ieee754/ldbl-96/s_frexpl.c (__frexpl): Likewise.
* math/libm-test.inc (frexp_test_data): Add sNaN tests.
Various modf implementations return sNaN (both outputs) for sNaN
input. In fact they contain code to convert sNaN to qNaN for both
outputs, but the way this is done is multiplying by 1.0 (for a wider
range of inputs that includes NaNs as well as numbers with exponent
large enough to ensure that they are integers), and that
multiplication by 1.0 is optimized away by GCC in the absence of
-fsignaling-nans, unlike other operations on NaNs used for this
purpose that are not no-ops for non-sNaN input. This patch arranges
for those files to be built with -fsignaling-nans so that this
existing code is effective as intended.
Tested for x86_64 and x86.
[BZ #20240]
* math/Makefile (CFLAGS-s_modf.c): New variable.
(CFLAGS-s_modff.c): Likewise.
(CFLAGS-s_modfl.c): Likewise.
* math/libm-test.inc (modf_test_data): Add sNaN tests.
The i386/x86_64 versions of log2l return sNaN for sNaN input. This
patch fixes them to add NaN inputs to themselves so that qNaN is
returned in this case.
Tested for x86_64 and x86.
[BZ #20235]
* sysdeps/i386/fpu/e_log2l.S (__ieee754_log2l): Add NaN input to
itself.
* sysdeps/x86_64/fpu/e_log2l.S (__ieee754_log2l): Likewise.
* math/libm-test.inc (log2_test_data): Add sNaN tests.
The i386/x86_64 versions of log1pl return sNaN for sNaN input. This
patch fixes them to add a NaN input to itself so that qNaN is returned
in this case.
Tested for x86_64 and x86.
[BZ #20229]
* sysdeps/i386/fpu/s_log1pl.S (__log1pl): Add NaN input to itself.
* sysdeps/x86_64/fpu/s_log1pl.S (__log1pl): Likewise.
* math/libm-test.inc (log1p_test_data): Add sNaN tests.
The i386/x86_64 versions of log10l return sNaN for sNaN input. This
patch fixes them to add a NaN input to itself so that qNaN is returned
in this case.
Tested for x86_64 and x86.
[BZ #20228]
* sysdeps/i386/fpu/e_log10l.S (__ieee754_log10l): Add NaN input to
itself.
* sysdeps/x86_64/fpu/e_log10l.S (__ieee754_log10l): Likewise.
* math/libm-test.inc (log10_test_data): Add sNaN tests.
The i386/x86_64 versions of logl return sNaN for sNaN input. This
patch fixes them to add a NaN input to itself so that qNaN is returned
in this case.
Tested for x86_64 and x86 (including a build for i586 to cover the
non-i686 logl version).
[BZ #20227]
* sysdeps/i386/fpu/e_logl.S (__ieee754_logl): Add NaN input to
itself.
* sysdeps/i386/i686/fpu/e_logl.S (__ieee754_logl): Likewise.
* sysdeps/x86_64/fpu/e_logl.S (__ieee754_logl): Likewise.
* math/libm-test.inc (log_test_data): Add sNaN tests.
The i386 and x86_64 implementations of expl, exp10l and expm1l (code
shared between the functions) return sNaN for sNaN input. This patch
fixes them to add NaN inputs to themselves so that qNaN is returned in
this case.
Tested for x86_64 and x86.
[BZ #20226]
* sysdeps/i386/fpu/e_expl.S (IEEE754_EXPL): Add NaN argument to
itself.
* sysdeps/x86_64/fpu/e_expl.S (IEEE754_EXPL): Likewise.
* math/libm-test.inc (exp_test_data): Add sNaN tests.
(exp10_test_data): Likewise.
(expm1_test_data): Likewise.
The wrapper implementations of ldexp / scalbn / scalbln
(architecture-independent), and their float / long double variants,
return sNaN for sNaN input. This patch fixes them to add relevant
arguments to themselves so that qNaN is returned in this case.
Tested for x86_64 and x86.
[BZ #20225]
* math/s_ldexp.c (__ldexp): Add non-finite or zero argument to
itself.
* math/s_ldexpf.c (__ldexpf): Likewise.
* math/s_ldexpl.c (__ldexpl): Likewise.
* math/w_scalbln.c (__w_scalbln): Likewise.
* math/w_scalblnf.c (__w_scalblnf): Likewise.
* math/w_scalblnl.c (__w_scalblnl): Likewise.
* math/libm-test.inc (scalbn_test_data): Add sNaN tests.
(scalbln_test_data): Likewise.
The i386 version of cbrtl returns sNaN (without raising any
exceptions) for sNaN input. This patch fixes it to add non-finite
arguments to themselves (the code path in question is also reached for
zero arguments, for which adding them to themselves is also harmless),
so that "invalid" is raised and qNaN returned.
Tested for x86_64 and x86.
[BZ #20224]
* sysdeps/i386/fpu/s_cbrtl.S (__cbrtl): Add non-finite or zero
argument to itself.
* math/libm-test.inc (cbrt_test_data): Add sNaN tests.
This converts the inclusion macro for each test to use
the format specific macro. In addition, the format
specifier is removed as it is applied via the LIT() macro
which is itself applied when converting the auto inputs and
libm-test.inc into libm-test.c.
Apply the following sed regexes to auto-libm-test-in in order:
s/flt-32/binary32/
s/dbl-64/binary64/
s/ldbl-96-intel/intel96/
s/ldbl-96-m68k/m68k96/
s/ldbl-128ibm/ibm128/
s/ldbl-128/binary128/
and fixup ldbl-96 comment manually.
Use gen-libm-test.pl to generate a list of macros
mapping to libm-test-ulps.h as this simplifies adding new
types without having to modify a growing number of
static headers each time a type is added.
This also removes the final usage of the TEST_(DOUBLE|FLOAT|LDOUBLE)
macros. Thus, they too are removed.
With the exception of the second argument of nexttoward,
any suffixes should be stripped from the test input, and
the macro LIT(x) should be applied to use the correct
suffix for the type being tested.
This adds a new argument type "j" to gen-test-libm.pl
to signify an argument to a test input which does not
require fixup. The test cases of nexttoward have
been updated to use this new feature.
This applies post-processing to all of the test inputs
through gen-libm-test.pl to strip literal suffixes and
apply the LIT(x) macro, with one exception stated above.
This seems a bit cleaner than tossing the macro onto
everything, albeit slightly more obfuscated.
The i386 version of atanhl returns sNaN for sNaN input. This patch
fixes it to add NaN arguments to themselves so it returns qNaN in this
case.
Tested for x86_64 and x86.
[BZ #20219]
* sysdeps/i386/fpu/e_atanhl.S (__ieee754_atanhl): Add NaN argument
to itself.
* math/libm-test.inc (atanh_test_data): Add sNaN tests.
The i386 version of asinhl returns sNaN (without raising any
exceptions) for sNaN input. This patch fixes it to add non-finite
arguments to themselves, so that "invalid" is raised and qNaN
returned.
Tested for x86_64 and x86.
[BZ #20218]
* sysdeps/i386/fpu/s_asinhl.S (__asinhl): Add non-finite argument
to itself.
* math/libm-test.inc (asinh_test_data): Add sNaN tests.
The dbl-64 version of asin returns sNaN for sNaN arguments. This
patch fixes it to add NaN arguments to themselves so that qNaN is
returned in this case.
Tested for x86_64 and x86.
[BZ #20213]
* sysdeps/ieee754/dbl-64/e_asin.c (__ieee754_asin): Add NaN
argument to itself.
* math/libm-test.inc (asin_test_data): Add sNaN tests.
The dbl-64 version of acos returns sNaN for sNaN arguments. This
patch fixes it to add NaN arguments to themselves so that qNaN is
returned in this case.
Tested for x86_64 and x86.
[BZ #20212]
* sysdeps/ieee754/dbl-64/e_asin.c (__ieee754_acos): Add NaN
argument to itself.
* math/libm-test.inc (acos_test_data): Add sNaN tests.
The x86 / x86_64 implementation of nextafterl (also used for
nexttowardl) produces incorrect results (NaNs) when negative
subnormals, the low 32 bits of whose mantissa are zero, are
incremented towards zero. This patch fixes this by disabling the
logic to decrement the exponent in that case.
Tested for x86_64 and x86.
[BZ #20205]
* sysdeps/i386/fpu/s_nextafterl.c (__nextafterl): Do not adjust
exponent when incrementing negative subnormal with low mantissa
word zero.
* math/libm-test.inc (nextafter_test_data) [TEST_COND_intel96]:
Add another test.
This is useful in situations where the long double type is
less precise than the type under test. This adds a new
wrapper macro LITM(x) to each type to append the proper
suffix onto macro constants found in math.h.
These are local to the test suite. Rename them as a macro starting
with lit_pi and a series of postfix operations to give us a constant
starting with lit_pi.
The lit prefix is intended to enable easy substitutions via
gen-test-libm.pl if needed.
This patch removes various no-longer-used macros from libm-test.inc.
NO_TEST_INLINE_FLOAT, NO_TEST_INLINE_DOUBLE and M_PI_6l would have
been used before relevant tests were moved to auto-libm-test-in.
TEST_COND_x86_64 and TEST_COND_x86 were for tests in auto-libm-test-in
XFAILed for x86, and are no longer relevant now the bugs in question
have been fixed and the XFAILing removed (if future x86-specific
XFAILs become needed, they can always be added back).
Tested for x86_64 and x86.
* math/libm-test.inc (NO_TEST_INLINE_FLOAT): Remove macro.
(NO_TEST_INLINE_DOUBLE): Likewise.
(TEST_COND_x86_64): Likewise.
(TEST_COND_x86): Likewise.
(M_PI_6l): Likewise.
Replace most of the type specific macros with the equivalent
type-generic macro using the following sed replacement command below:
sed -ri -e 's/defined TEST_FLOAT/TEST_COND_binary32/' \
-e 's/ndef TEST_FLOAT/ !TEST_COND_binary32/' \
-e 's/def TEST_FLOAT/ TEST_COND_binary32/' \
-e 's/defined TEST_DOUBLE/TEST_COND_binary64/'\
-e 's/ndef TEST_DOUBLE/ !TEST_COND_binary64/' \
-e 's/def TEST_DOUBLE/ TEST_COND_binary64/' \
-e 's/defined TEST_LDOUBLE && //' \
-e 's/ifdef TEST_LDOUBLE/if MANT_DIG >= 64/' \
-e 's/defined TEST_LDOUBLE/MANT_DIG >= 64/' \
-e '/nexttoward_test_data\[\]/,/ };/!s/LDBL_(MIN_EXP|MAX_EXP|MANT_DIG)/\1/g' \
libm-test.inc
With a little extra manual cleanup to simplify the following case:
#if MANT_DIG >= 64
# if MANT_DIG >= 64
...
# endif
...
Note, TEST_LDOUBLE checks are replaced by MANT_DIG >= 64 excepting
where another property of the type is being tested. And, the final
regex is intended to avoid replacing LDBL_ macro usage within the
nexttoward tests which explicitly take argument 2 as long double.
Attempt to creatively redefine the macros
to choose tests based on the format being
tested, not the type.
Note, TS 18661 does not define any printf
modifiers, so we need to be a little more
verbose about constructing strings to
output.
This patch adds more tests of signaling NaN inputs to libm-test.inc.
These tests are for a subset of functions with a single floating-point
input where no failures appeared in x86_64 or x86 testing. I intend
to investigate any failures of these new tests on some other
architectures before dealing with other functions.
Tested for x86_64 and x86.
* math/libm-test.inc (acosh_test_data): Add sNaN tests.
(atan_test_data): Likewise.
(ceil_test_data): Likewise.
(cos_test_data): Likewise.
(cosh_test_data): Likewise.
(erf_test_data): Likewise.
(exp2_test_data): Likewise.
(fabs_test_data): Likewise.
(floor_test_data): Likewise.
(ilogb_test_data): Likewise.
(j0_test_data): Likewise.
(j1_test_data): Likewise.
(jn_test_data): Likewise.
(lgamma_test_data): Likewise.
(lrint_test_data): Likewise.
(llrint_test_data): Likewise.
(logb_test_data): Likewise.
(lround_test_data): Likewise.
(llround_test_data): Likewise.
(nearbyint_test_data): Likewise.
(rint_test_data): Likewise.
(round_test_data): Likewise.
(sin_test_data): Likewise.
(sincos_test_data): Likewise.
(sinh_test_data): Likewise.
(sqrt_test_data): Likewise.
(tan_test_data): Likewise.
(tanh_test_data): Likewise.
(tgamma_test_data): Likewise.
(trunc_test_data): Likewise.
(y0_test_data): Likewise.
(y1_test_data): Likewise.
(yn_test_data): Likewise.
This patch adds support in libm-test.inc for tests with signaling NaN
arguments. gen-libm-test.pl is made to set a flag TEST_SNAN for such
tests, so that they can be disabled automatically when sNaN testing
isn't supported for a given type (at present, for float and double on
32-bit x86 because it's unpredictable when a value might be loaded
into a floating-point register and so automatically converted to long
double with sNaNs converted to quiet NaNs). -fsignaling-nans is used
where needed.
Tests are added for classification macros, as a starting point; this
is deliberately more conservative than Thomas's patch
<https://sourceware.org/ml/libc-ports/2013-04/msg00008.html>, to allow
more tests to be added, and issues exposed fixed, bit by bit.
Tested for x86_64 and x86.
* math/libm-test.inc: Update comment about NaN testing.
(TEST_SNAN): New macro.
(snan_value): Likewise.
(enable_test): Disable tests of sNaNs when SNAN_TESTS fails.
(fpclassify_test_data): Add sNaN tests.
(isfinite_test_data): Likewise.
(isinf_test_data): Likewise.
(isnan_test_data): Likewise.
(isnormal_test_data): Likewise.
(issignaling_test_data): Likewise.
(signbit_test_data): Likewise.
* math/gen-libm-test.pl (%beautify): Add snan_value.
(show_exceptions): Add argument $test_snan.
(parse_args): Handle snan_value as non-finite. Update call to
show_exceptions.
* math/Makefile (libm-test-no-inline-cflags): Add
-fsignaling-nans.
C99 and C11 allow but do not require ceil, floor, round and trunc to
raise the "inexact" exception for noninteger arguments. TS 18661-1
requires that this exception not be raised by these functions. This
aligns them with general IEEE semantics, where "inexact" is only
raised if the final step of rounding the infinite-precision result to
the result type is inexact; for these functions, the
infinite-precision integer result is always representable in the
result type, so "inexact" should never be raised.
The generic implementations of ceil, floor and round functions contain
code to force "inexact" to be raised. This patch removes it for round
functions to align them with TS 18661-1 in this regard. The tests
*are* updated by this patch; there are fewer architecture-specific
versions than for ceil and floor, and I fixed the powerpc ones some
time ago. If any others still have the issue, as shown by tests for
round failing with spurious exceptions, they can be fixed separately
by architecture maintainers or others.
Tested for x86_64, x86 and mips64.
[BZ #15479]
* sysdeps/ieee754/dbl-64/s_round.c (huge): Remove variable.
(__round): Do not force "inexact" exception.
* sysdeps/ieee754/dbl-64/wordsize-64/s_round.c (huge): Remove
variable.
(__round): Do not force "inexact" exception.
* sysdeps/ieee754/flt-32/s_roundf.c (huge): Remove variable.
(__roundf): Do not force "inexact" exception.
* sysdeps/ieee754/ldbl-128/s_roundl.c (huge): Remove variable.
(__roundl): Do not force "inexact" exception.
* sysdeps/ieee754/ldbl-96/s_roundl.c (huge): Remove variable.
(__roundl): Do not force "inexact" exception.
* math/libm-test.inc (round_test_data): Do not allow spurious
"inexact" exceptions.
ldbl-128ibm had an implementation of fmal that just did (x * y) + z in
most cases, with no attempt at actually being a fused operation.
This patch replaces it with a genuine fused operation. It is not
necessarily correctly rounding, but should produce a result at least
as accurate as the long double arithmetic operations in libgcc, which
I think is all that can reasonably be expected for such a non-IEEE
format where arithmetic is approximate rather than rounded according
to any particular rule for determining the exact result. Like the
libgcc arithmetic, it may produce spurious overflow and underflow
results, and it falls back to the libgcc multiplication in the case of
(finite, finite, zero).
This concludes the fixes for bug 13304; any subsequently found fma
issues should go in separate Bugzilla bugs. Various other pieces of
bug 13304 were fixed in past releases over the past several years.
Tested for powerpc.
[BZ #13304]
* sysdeps/ieee754/ldbl-128ibm/s_fmal.c: Include <fenv.h>,
<float.h>, <math_private.h> and <stdlib.h>.
(add_split): New function.
(mul_split): Likewise.
(ext_val): New typedef.
(store_ext_val): New function.
(mul_ext_val): New function.
(compare): New function.
(add_split_ext): New function.
(__fmal): After checking for Inf, NaN and zero, compute result as
an exact sum of scaled double values in round-to-nearest before
adding those up and adjusting for other rounding modes.
* math/auto-libm-test-in: Remove xfail-rounding:ldbl-128ibm from
tests of fma.
* math/auto-libm-test-out: Regenerated.
libm-test.inc has a comment about signs of NaNs not being tested.
This is out of date since:
commit ce66581742
Author: Joseph Myers <joseph@codesourcery.com>
Date: Sat Nov 16 12:48:35 2013 +0000
Test signs of NaNs in libm-test.inc where appropriate.
This patch removes the inaccurate statement.
* math/libm-test.inc: Update comment not to refer to signs of NaNs
not being tested.
Bug 19848 reports cases where powl on x86 / x86_64 has error
accumulation, for small integer exponents, larger than permitted by
glibc's accuracy goals, at least in some rounding modes. This patch
further restricts the exponent range for which the
small-integer-exponent logic is used to limit the possible error
accumulation.
Tested for x86_64 and x86 and ulps updated accordingly.
[BZ #19848]
* sysdeps/i386/fpu/e_powl.S (p3): Rename to p2 and change value
from 8 to 4.
(__ieee754_powl): Compare integer exponent against 4 not 8.
* sysdeps/x86_64/fpu/e_powl.S (p3): Rename to p2 and change value
from 8 to 4.
(__ieee754_powl): Compare integer exponent against 4 not 8.
* math/auto-libm-test-in: Add more tests of pow.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
When installing glibc (w/mathvec enabled) in-place on a system with
a glibc w/out mathvec enabled, the install will clobber the existing
libm.so (e.g., /lib64/libm-2.21.so) with a linker script. This is
because libm.so is a symlink to libm.so.6 which is a symlink to the
final libm-2.21.so file. When the makefile writes the linker script
directly to libm.so, it gets clobbered.
The simple patch below to math/Makefile fixes this. It is based on
the nptl Makefile, which does exactly the same thing in a safer way.
When building on i686, x86_64, and arm, and with NDEBUG, or --with-cpu
there are various variables and functions which are unused based on
these settings.
This patch marks all such variables with __attribute__((unused)) to
avoid the compiler warnings when building with the aformentioned
options.
A large number of the test-ldouble failures seen for ldbl-128ibm are
spurious "underflow" and "inexact" exceptions. These arise from such
exceptions in the underlying arithmetic; unlike other spurious
exceptions from that arithmetic, they do not in general relate to
cases where the returned result is also substantially inaccurate, are
not so readily avoidable by appropriately conditional libgcc patches,
and are widespread enough to be hard to handle through individual
XFAILing of the affected tests.
Thus, this patch documents relaxed accuracy goals for libm functions
for IBM long double and makes libm-test.inc reflect these spurious
exceptions in ldbl-128ibm arithmetic and always allow them in
ldbl-128ibm testing (while still not allowing these exceptions to be
missing where required to be present). Tested for powerpc.
* manual/math.texi (Errors in Math Functions): Document relaxed
accuracy goals for IBM long double.
* math/libm-test.inc (test_exceptions): Always allow spurious
"underflow" and "inexact" exceptions for IBM long double.
The ldbl-128ibm implementations of remainderl and remquol have logic
resulting in incorrect tests for equality of the absolute values of
the arguments. Equality is tested based on the integer
representations of the high and low parts, with the sign bit masked
off the high part - but when this changes the sign of the high part,
the sign of the low part needs to be changed as well, and failure to
do this means arguments are wrongly treated as equal when they are
not.
This patch fixes the logic to adjust signs of low parts as needed.
Tested for powerpc.
[BZ #19603]
* sysdeps/ieee754/ldbl-128ibm/e_remainderl.c
(__ieee754_remainderl): Adjust sign of integer version of low part
when taking absolute value of high part.
* sysdeps/ieee754/ldbl-128ibm/s_remquol.c (__remquol): Likewise.
* math/libm-test.inc (remainder_test_data): Add another test.
(remquo_test_data): Likewise.
In ICO C++11 mode ensure that isinff, isinfl, isnanf, and isnanl
are defined. These functions were accidentally removed from the
header as part of commit d9b965fa56,
but being GNU extensions, they should have been left in place.
On running tests after from-scratch ulps regeneration, I found that
some libm tests failed with ulps in excess of those recorded in the
from-scratch regeneration, which should never happen unless those ulps
exceed the limit on ulps that can go in libm-test-ulps files.
Failure: Test: atan2_upward (inf, -inf)
Result:
is: 2.35619498e+00 0x1.2d97ccp+1
should be: 2.35619450e+00 0x1.2d97c8p+1
difference: 4.76837159e-07 0x1.000000p-21
ulp : 2.0000
max.ulp : 1.0000
Maximal error of `atan2_upward'
is : 2 ulp
accepted: 1 ulp
Failure: Test: carg_upward (-inf + inf i)
Result:
is: 2.35619498e+00 0x1.2d97ccp+1
should be: 2.35619450e+00 0x1.2d97c8p+1
difference: 4.76837159e-07 0x1.000000p-21
ulp : 2.0000
max.ulp : 1.0000
Maximal error of `carg_upward'
is : 2 ulp
accepted: 1 ulp
The problem comes from the addition of tests for the finite-math-only
versions of libm functions. Those tests share ulps with the default
function variants. make regen-ulps runs the default tests before the
finite-math-only tests, concatenating the resulting ulps before
feeding them to gen-libm-test.pl to generate a new libm-test-ulps
file. But gen-libm-test.pl always takes the last ulps value given for
any (function, type) pair. So, if the largest ulps for a function
come from non-finite inputs, a from-scratch regeneration loses those
ulps.
This patch fixes gen-libm-test.pl, in the case where there are
multiple ulps values for a (function, type) pair - which can only
happen as part of a regeneration - to take the largest ulps value
rather than the last one.
Tested for ARM / MIPS / powerpc-nofpu.
* math/gen-libm-test.pl (parse_ulps): Do not reduce
already-recorded ulps.
* sysdeps/arm/libm-test-ulps: Regenerated.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
GLIBC declares isinf and isnan as expected by Unix98 and for C99 programs
these functions are hidden by the generics inf and isnan macros.
However C++11 defines isinf and isnan with the same semantics as C99
but requires that they are functions not macros (C++11 26.8 [c.math]
paragraph 10).
This then results in a conflict for perfectly valid C++11 programs:
--
using std::isinf;
using std::isnan;
double d1 = isinf(1.0);
double d2 = isnan(1.0);
d.cc:3:12: error: ‘constexpr bool std::isinf(double)’ conflicts with a previous declaration
using std::isinf;
[...]
/usr/include/bits/mathcalls.h:201:1: note: previous declaration ‘int isinf(double)’
__MATHDECL_1 (int,isinf,, (_Mdouble_ __value)) __attribute__ ((__const__));
[...]
--
This patch fixes the prototypes by leaving the obsolete functions
defined for C++98 code (since they do not conflict with any standard
function in C++98), however preventing them on C++11.
No issues found in libstdc++ tests and check on x86_64 and i686 with
glibc testsuite.
Patch from Jonathan Wakely <jwakely.gcc@gmail.com>.
[BZ #19439]
* math/bits/mathcalls.h
[!__cplusplus || __cplusplus < 201103L] (isinf): Do not declare
prototype.
[!__cplusplus || __cplusplus < 201103L] (isnan): Likewise.
The nan, nanf and nanl functions handle payload strings by doing e.g.:
if (tagp[0] != '\0')
{
char buf[6 + strlen (tagp)];
sprintf (buf, "NAN(%s)", tagp);
return strtod (buf, NULL);
}
This is an unbounded stack allocation based on the length of the
argument. Furthermore, if the argument starts with an n-char-sequence
followed by ')', that n-char-sequence is wrongly treated as
significant for determining the payload of the resulting NaN, when ISO
C says the call should be equivalent to strtod ("NAN", NULL), without
being affected by that initial n-char-sequence. This patch fixes both
those problems by using the __strtod_nan etc. functions recently
factored out of strtod etc. for that purpose, with those functions
being exported from libc at version GLIBC_PRIVATE.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #16961]
[BZ #16962]
* math/s_nan.c (__nan): Use __strtod_nan instead of constructing a
string on the stack for strtod.
* math/s_nanf.c (__nanf): Use __strtof_nan instead of constructing
a string on the stack for strtof.
* math/s_nanl.c (__nanl): Use __strtold_nan instead of
constructing a string on the stack for strtold.
* stdlib/Versions (libc): Add __strtof_nan, __strtod_nan and
__strtold_nan to GLIBC_PRIVATE.
* math/test-nan-overflow.c: New file.
* math/test-nan-payload.c: Likewise.
* math/Makefile (tests): Add test-nan-overflow and
test-nan-payload.
Old workaround based on assembly aliases can lead to link fail (bug 19058).
This patch makes workaround in another way to avoid it.
[BZ #19058]
* math/Makefile ($(inst_libdir)/libm.so): Added libmvec_nonshared.a
to AS_NEEDED.
* sysdeps/x86/fpu/bits/math-vector.h: Removed code with old workaround.
* sysdeps/x86_64/fpu/Makefile (libmvec-support,
libmvec-static-only-routines): Added new file.
* sysdeps/x86_64/fpu/svml_finite_alias.S: New file.
The lgamma (and likewise lgammaf, lgammal) function wrongly sets the
signgam variable even when building for strict ISO C conformance
(-std=c99 / -std=c11), although the user may define such a variable
and it's only in the implementation namespace for POSIX with XSI
extensions enabled.
Following discussions starting at
<https://sourceware.org/ml/libc-alpha/2013-04/msg00767.html> and
<https://sourceware.org/ml/libc-alpha/2015-10/msg00844.html>, it seems
that the safest approach for fixing this particular issue is for
signgam to become a weak alias for a newly exported symbol __signgam,
with the library functions only setting __signgam, at which point
static linker magic will preserve the alias for newly linked binaries
that refer to the library's signgam rather than defining their own,
while breaking the alias for programs that define their own signgam,
with new symbol versions for lgamma functions and with compat symbols
for existing binaries that set both signgam and __signgam.
This patch implements that approach for the fix. signgam is made into
a weak alias. The four symbols __signgam, lgamma, lgammaf, lgammal
get new symbol versions at version GLIBC_2.23, with the existing
versions of lgamma, lgammaf and lgammal becoming compat symbols.
When the compat versions are built, gamma, gammaf and gammal are
aliases for the compat versions (i.e. always set signgam); this is OK
as they are not ISO C functions, and avoids adding new symbol versions
for them unnecessarily. When the compat versions are not built
(i.e. for static linking and for future glibc ports), gamma, gammaf
and gammal are aliases for the new versions that set __signgam. The
ldbl-opt versions are updated accordingly.
The lgamma wrappers are adjusted so that the same source files,
included from different files with different definitions of
USE_AS_COMPAT, can build either the new versions or the compat
versions. Similar changes are made to the ia64 versions (untested).
Tests are added that the lgamma functions do not interfere with a user
variable called signgam for ISO C, with various choices for the size
of that variable, whether it is initialized, and for static and
dynamic linking. The conformtest whitelist entry is removed as well.
Tested for x86_64, x86, mips64 and powerpc, including looking at
objdump --dynamic-syms output to make sure the expected sets of
symbols were aliases. Also spot-tested that a binary built with old
glibc works properly (i.e. gets signgam set) when run with new glibc.
[BZ #15421]
* sysdeps/ieee754/s_signgam.c (signgam): Rename to __signgam,
initialize with 0 and define as weak alias of __signgam.
* include/math.h [!_ISOMAC] (__signgam): Declare.
* math/Makefile (libm-calls): Add w_lgamma_compat.
(tests): Add test-signgam-uchar, test-signgam-uchar-init,
test-signgam-uint, test-signgam-uint-init, test-signgam-ullong and
test-signgam-ullong-init.
(tests-static): Add test-signgam-uchar-static,
test-signgam-uchar-init-static, test-signgam-uint-static,
test-signgam-uint-init-static, test-signgam-ullong-static and
test-signgam-ullong-init-static.
(CFLAGS-test-signgam-uchar.c): New variable.
(CFLAGS-test-signgam-uchar-init.c): Likewise.
(CFLAGS-test-signgam-uchar-static.c): Likewise.
(CFLAGS-test-signgam-uchar-init-static.c): Likewise.
(CFLAGS-test-signgam-uint.c): Likewise.
(CFLAGS-test-signgam-uint-init.c): Likewise.
(CFLAGS-test-signgam-uint-static.c): Likewise.
(CFLAGS-test-signgam-uint-init-static.c): Likewise.
(CFLAGS-test-signgam-ullong.c): Likewise.
(CFLAGS-test-signgam-ullong-init.c): Likewise.
(CFLAGS-test-signgam-ullong-static.c): Likewise.
(CFLAGS-test-signgam-ullong-init-static.c): Likewise.
* math/Versions (libm): Add GLIBC_2.23.
* math/lgamma-compat.h: New file.
* math/test-signgam-main.c: Likewise.
* math/test-signgam-uchar-init-static.c: Likewise.
* math/test-signgam-uchar-init.c: Likewise.
* math/test-signgam-uchar-static.c: Likewise.
* math/test-signgam-uchar.c: Likewise.
* math/test-signgam-uint-init-static.c: Likewise.
* math/test-signgam-uint-init.c: Likewise.
* math/test-signgam-uint-static.c: Likewise.
* math/test-signgam-uint.c: Likewise.
* math/test-signgam-ullong-init-static.c: Likewise.
* math/test-signgam-ullong-init.c: Likewise.
* math/test-signgam-ullong-static.c: Likewise.
* math/test-signgam-ullong.c: Likewise.
* math/w_lgamma.c: Rename to w_lgamma_main.c and replace by
wrapper of w_lgamma_main.c.
* math/w_lgamma_compat.c: New file.
* math/w_lgamma_compatf.c: Likewise.
* math/w_lgamma_compatl.c: Likewise.
* math/w_lgamma_main.c: New file. Based on w_lgamma.c. Include
<lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support
defining compatibility symbols.
(__lgamma): Change to LGFUNC (__lgamma). Use CALL_LGAMMA.
* math/w_lgammaf.c: Rename to w_lgammaf_main.c and replace by
wrapper of w_lgammaf_main.c.
* math/w_lgammaf_main.c: New file. Based on w_lgammaf.c. Include
<lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support
defining compatibility symbols.
(__lgammaf): Change to LGFUNC (__lgammaf). Use CALL_LGAMMA.
* math/w_lgammal.c: Rename to w_lgammal_main.c and replace by
wrapper of w_lgammal_main.c.
* math/w_lgammal_main.c: New file. Based on w_lgammal.c. Include
<lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support
defining compatibility symbols.
(__lgammal): Change to LGFUNC (__lgammal). Use CALL_LGAMMA.
* sysdeps/ia64/fpu/lgamma-compat.h: New file.
* sysdeps/ia64/fpu/w_lgamma.c: Move to ....
* sysdeps/ia64/fpu/w_lgamma_main.c: ...here. Include
<lgamma-compat.h>.
(__ieee754_lgamma): Change to LGFUNC (lgamma). Use CALL_LGAMMA.
(__ieee754_gamma): Define as alias.
* sysdeps/ia64/fpu/w_lgammaf.c: Move to ....
* sysdeps/ia64/fpu/w_lgammaf_main.c: ...here. Include
<lgamma-compat.h>.
(__ieee754_lgammaf): Change to LGFUNC (lgammaf). Use CALL_LGAMMA.
(__ieee754_gammaf): Define as alias.
* sysdeps/ia64/fpu/w_lgammal.c: Move to ....
* sysdeps/ia64/fpu/w_lgammal_main.c: ...here. Include
<lgamma-compat.h>.
(__ieee754_lgammal): Change to LGFUNC (lgammal). Use CALL_LGAMMA.
(__ieee754_gammal): Define as alias.
* sysdeps/ieee754/ldbl-opt/w_lgamma.c: Move to ....
* sysdeps/ieee754/ldbl-opt/w_lgamma_compat.c: ...here. Include
<math/w_lgamma_compat.c>.
[LONG_DOUBLE_COMPAT(libm, GLIBC_2_0)] (__lgammal_dbl_compat):
Define as alias of __lgamma_compat and use in defining lgammal.
* sysdeps/ieee754/ldbl-opt/w_lgammal.c: Move to ....
* sysdeps/ieee754/ldbl-opt/w_lgamma_compatl.c: ...here. Include
<math/lgamma-compat.h> and <math/w_lgamma_compatl.c>.
(USE_AS_COMPAT): New macro.
(LGAMMA_OLD_VER): Undefine and redefine.
(lgammal): Do not define here.
(gammal): Only define here if [GAMMA_ALIAS].
* conform/linknamespace.pl (@whitelist): Remove signgam.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
Similar to bug 15491 recently fixed for x86_64 / x86, the powerpc
(both powerpc32 and powerpc64) hard-float implementations of
nearbyintf and nearbyint wrongly clear an "inexact" exception that was
raised before the function was called; this shows up as failure of the
test math/test-nearbyint-except added when that bug was fixed. They
also wrongly leave traps on "inexact" disabled if they were enabled
before the function was called.
This patch fixes the bugs similar to how the x86 bug was fixed: saving
and restoring the whole floating-point state, both to restore the
original "inexact" flag state and to restore the original state of
whether traps on "inexact" were enabled. Because there's a convenient
point in the powerpc implementations to save state after any sNaN
arguments will have raised "invalid" but before "inexact" traps need
to be disabled, no special handling for "invalid" is needed as in the
x86 version.
Tested for powerpc64 and powerpc32, where it fixes the
math/test-nearbyint-except failure as well as fixing the new test
math/test-nearbyint-except-2 added by this patch. Also tested for
x86_64 and x86 that the new test passes.
If powerpc experts see a more efficient way of doing this
(e.g. instruction positioning that's better for pipelines on typical
processors) then of course followups optimizing the fix are welcome.
[BZ #19228]
* sysdeps/powerpc/powerpc32/fpu/s_nearbyint.S (__nearbyint): Save
and restore full floating-point state.
* sysdeps/powerpc/powerpc32/fpu/s_nearbyintf.S (__nearbyintf):
Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_nearbyint.S (__nearbyint):
Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_nearbyintf.S (__nearbyintf):
Likewise.
* math/test-nearbyint-except-2.c: New file.
* math/Makefile (tests): Add test-nearbyint-except-2.
Prompted by a gcc-patches discussion, this patch adds tests of pow for
the cases where pow (x, 0.5) is required to return a different result
from sqrt (x), as those cases were previously missing from the tests
(although they worked correctly).
Tested for x86_64 and x86.
* math/auto-libm-test-in: Add another test of pow.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (pow_test_data): Add another test.
I noticed a typo in the messages from the signgam tests I recently
added. This patch fixes it.
Tested for x86_64 and x86.
* math/test-signgam-finite.c (RUN_TESTS): Correct messages about
calls with argument -0.5.
* math/test-signgam-finite-c99.c (RUN_TESTS): Likewise.
This patch arranges for the libm-test tests to be run for the
finite-math-only function variants, in addition to the existing runs
for out-of-line and bits/mathinline.h inline variants.
gen-libm-test.pl is made to add a flag to all tests with non-finite
inputs or outputs so that they can be skipped at runtime when the
finite-math-only variants are being tested (skipping is for all
rounding modes; that is, -ffinite-math-only is being treated as
excluding overflow cases even when the rounding mode is such that the
overflowed result is finite). errno setting is not tested for these
variants (in general they don't set it, and it's
implementation-defined in ISO C whether it's set on underflow, with
the glibc definition being that it may not be for -ffinite-math-only;
other cases where errno would normally be expected to be set are
mostly excluded as having non-finite or overflowing arguments or
results).
As with the inline function tests, these ones are built with
-D__FINITE_MATH_ONLY=1 to select the function variants, rather than
-ffinite-math-only. Use of -ffinite-math-only would not be suitable
for these tests because it would also affect libm-test.inc code that
e.g. tests whether results are infinities or NaNs - if these function
variants have bugs that incorrectly produce such results, we want them
to show up in the tests, which means the compiler should not be
optimizing the tests on the basis of results being finite.
The finite-math-only functions share the same ulps settings as the
main out-of-line functions.
These interfaces were one significant group of untested ABIs listed at
<https://sourceware.org/ml/libc-alpha/2013-07/msg00386.html>. I
haven't rerun the script to list untested interfaces, but I expect
that the vast bulk of interfaces there are still untested and could do
with testcases being added (or, if applicable, being made compat
symbols; in general, most symbols not starting '_' are safe bets to
add tests for, while _* need more investigation of what the actual
public API is, if any). I'd like to encourage people to help reduce
the accumulation of untested interfaces by adding more tests.
Tested for x86_64 and x86. Given my recent lgamma/gamma and log*
fixes, the new tests pass (before those fixes, the new tests showed up
those bugs, so illustrating the practical utility of having tests for
these function variants).
* math/libm-test.inc (NON_FINITE): New macro.
(enable_test): Do not run tests flagged NON_FINITE if TEST_FINITE.
* math/gen-libm-test.pl (show_exceptions): Add argument
$non_finite.
(parse_args): Update call to show_exceptions.
* math/test-math-finite.h: New file.
* math/test-math-no-finite.h: Likewise.
* math/test-double-finite.c: Likewise.
* math/test-float-finite.c: Likewise.
* math/test-ldouble-finite.c: Likewise.
* math/test-double.c: Include "test-math-no-finite.h".
* math/test-float.c: Include "test-math-no-finite.h".
* math/test-ldouble.c: Include "test-math-no-finite.h".
* math/test-math-inline.h (TEST_FINITE): New macro.
* math/test-math-vector.h (TEST_FINITE): Likewise.
* math/Makefile (test-longdouble-yes): Add test-ldouble-finite.
(libm-tests): Add test-float-finite and test-double-finite.
($(objpfx)test-float-finite.o): New dependency on
$(objpfx)libm-test.stmp.
($(objpfx)test-double-finite.o): Likewise.
($(objpfx)test-ldouble-finite.o): Likewise.
(libm-test-no-inline-cflags): New variable.
(libm-test-finite-cflags): Likewise.
(CFLAGS-test-float-finite.c): Likewise.
(CFLAGS-test-double-finite.c): Likewise.
(CFLAGS-test-ldouble-finite.c): Likewise.
(CFLAGS-test-float.c): Use $(libm-test-no-inline-cflags).
(CFLAGS-test-double.c): Likewise.
(CFLAGS-test-ldouble.c): Likewise.
The lgamma inline functions in bits/math-finite.h do not set signgam
if __USE_ISOC99, even when other feature test macros mean a standard
such as XSI POSIX is selected for which it should be set. (This is
essentially the opposite issue to bug 15421, the out-of-line versions
setting signgam even when they shouldn't.)
This patch fixes those functions to use __USE_MISC || __USE_XOPEN as
the condition for when to set signgam, since it's the condition for
when math.h declares signgam. The legacy gamma* names are only
declared at all if __USE_MISC || __USE_XOPEN, so they just set signgam
unconditionally.
Tests for certain standards or not using _GNU_SOURCE cannot use
test-skeleton.c (this is a known issue noted on the wiki todo list).
Thus, the new tests that signgam remains not set in ISO C modes do not
use test-skeleton.c. They also define _ISOMAC to avoid running into
declarations in the internal include/ headers that only work in
_GNU_SOURCE mode.
Tested for x86_64 and x86.
[BZ #19211]
* math/bits/math-finite.h (lgamma): Set signgam if [__USE_MISC ||
__USE_XOPEN], not if [!__USE_ISOC99].
(lgammaf): Likewise.
(lgammal): Likewise.
(gamma): Set signgam unconditionally, not if [!__USE_ISOC99].
(gammaf): Likewise.
(gammal): Likewise.
* math/test-signgam-finite-c11.c: New file.
* math/test-signgam-finite-c99.c: Likewise.
* math/test-signgam-finite.c: Likewise.
* math/Makefile (tests): Add test-signgam-finite,
test-signgam-finite-c99 and test-signgam-finite-c11.
(CFLAGS-test-signgam-finite.c): New variable.
(CFLAGS-test-signgam-finite-c99.c): Likewise.
(CFLAGS-test-signgam-finite-c11.c): Likewise.
bits/math-finite.h maps ldexp functions to corresponding scalbn
functions. This is (a) a namespace bug for C90, which has ldexp but
not scalbn, and (b) in any case useless, since the ldexp and scalbn
functions have identical semantics (for floating-point types with
radix 2), and since the fix for bug 6803 are actually aliases
(presumably the mapping was based around the old bug of scalbn not
setting errno). This patch removes the bogus redirections.
Tested for x86_64 and x86.
[BZ #19209]
* math/bits/math-finite.h (ldexp): Remove declaration.
(ldexpf): Likewise.
(ldexpl): Likewise.
bits/math-finite.h declares -ffinite-math-only variants of various
functions under conditions not matching those under which the normal
versions are declared.
* math.h only ever includes bits/mathcalls.h to declare float and long
double functions if __USE_ISOC99, but bits/math-finite.h declares
some float functions regardless (long double ones are conditioned on
__MATH_DECLARE_LDOUBLE). (For C90 functions this isn't a
conformance bug because C90 reserves the float and long double
names, but is still contrary to good glibc practice. For some other
functions in older XSI standards it *is* a conformance bug.)
* Some functions are defined as inlines using lgamma_r functions under
conditions where those lgamma_r functions are not themselves
declared.
* hypot is declared under __USE_XOPEN || __USE_ISOC99 in
bits/mathcalls.h, __USE_ISOC99 only in bits/math-finite.h.
* float and long double versions of Bessel functions should be limited
to __USE_MISC (as in bug 18977).
* gamma should not be declared for __USE_XOPEN2K (as in bug 18967).
* remainder should be restricted to __USE_XOPEN_EXTENDED ||
__USE_ISOC99, not unconditional.
* scalb should not be declared for __USE_XOPEN2K8, and scalbf and
scalbl are non-POSIX (as in bug 18967).
This patch fixes all these issues (it doesn't seem worth splitting
them into separate patches or bugs). I put __USE_ISOC99 conditionals,
where needed, around both float and long double declarations, even
though formally redundant around the long double declarations because
__MATH_DECLARE_LDOUBLE isn't defined without __USE_ISOC99; it seemed
clearer that way. The missing declarations of lgamma_r functions are
dealt with by directly using declarations of __lgamma*_r_finite, in
the implementation namespace, rather than having the inlines rely on
asm redirection of lgamma*_r.
After this patch, there are some apparently redundant nested
__USE_ISOC99 conditionals in lgamma / gamma definitions. These
actually reflect a separate bug (the correct condition for the lgamma
inline functions to set signgam is __USE_MISC || __USE_XOPEN, the
condition under which signgam is declared, rather than disabling
setting it if __USE_ISOC99, which includes XSI POSIX versions for
which signgam *should* be set). They'll be fixed as part of a fix for
that bug, which will also add tests for these inlines. I've put a
note about more general conform/ test coverage for -ffinite-math-only
on
<https://sourceware.org/glibc/wiki/Development_Todo/Master#conformtest_improvements>,
alongside other options for which this is also relevant (some of which
have also had such bugs in the past relating to mismatched
conditionals).
I also intend to enable the main libm-test.inc tests for the
math-finite.h functions, but some other bugs in __*_finite need fixing
first.
[BZ #19205]
* math/bits/math-finite.h (acosf): Condition declaration on
[__USE_ISOC99].
(acosl): Likewise.
(acoshf): Likewise.
(acoshl): Likewise.
(asinf): Likewise.
(asinl): Likewise.
(atan2f): Likewise.
(atan2l): Likewise.
(atanhf): Likewise.
(atanhl): Likewise.
(coshf): Likewise.
(coshl): Likewise.
(expf): Likewise.
(expl): Likewise.
(fmodf): Likewise.
(fmodl): Likewise.
(hypot): Change condition to [__USE_XOPEN || __USE_ISOC99].
(j0f): Change condition to [__USE_MISC && __USE_ISOC99].
(j0l): Likewise.
(y0f): Likewise.
(y0l): Likewise.
(j1f): Likewise.
(j1l): Likewise.
(y1f): Likewise.
(y1l): Likewise.
(jnf): Likewise.
(jnl): Likewise.
(ynf): Likewise.
(ynl): Likewise.
(lgammaf_r): Condition declaration on [__USE_ISOC99].
(lgammal_r): Likewise.
(__lgamma_r_finite): New declaration.
(__lgammaf_r_finite): Likewise.
(__lgammal_r_finite): Likewise.
(lgamma): Use __lgamma_r_finite.
(lgammaf): Condition definition on [__USE_ISOC99]. Use
__lgammaf_r_finite.
(lgammal): Condition definition on [__USE_ISOC99]. Use
__lgammal_r_finite.
(gamma): Do not define for [!__USE_MISC && __USE_XOPEN2K]. Use
__lgamma_r_finite.
(gammaf): Condition definition on [__USE_ISOC99]. Use
__lgammaf_r_finite.
(gammal): Condition definition on [__USE_ISOC99]. Use
__lgammal_r_finite.
(logf): Condition declaration on [__USE_ISOC99].
(logl): Likewise.
(log10f): Likewise.
(log10l): Likewise.
(ldexpf): Likewise.
(ldexpl): Likewise.
(powf): Likewise.
(powl): Likewise.
(remainder): Condition declaration on [__USE_XOPEN_EXTENDED ||
__USE_ISOC99].
(remainderf): Condition declaration on [__USE_ISOC99].
(remainderl): Likewise.
(scalb): Do not declare for [!__USE_MISC && __USE_XOPEN2K8].
(scalbf): Change condition to [__USE_MISC && __USE_ISOC99].
(scalbl): Likewise.
(sinhf): Condition declaration on [__USE_ISOC99].
(sinhl): Likewise.
(sqrtf): Likewise.
(sqrtl): Likewise.
This patch refactors how libm-test.inc handles disabling
errno/exception handling tests, and some other tests, for
__FAST_MATH__ inline function tests.
The macro TEST_INLINE is changed from being defined/undefined to being
defined to 1 or 0, so that it can be tested in "if" conditionals
instead of #if. For tests of errno and exception setting, separate
macros TEST_ERRNO and TEST_EXCEPTIONS are added, and TEST_ERRNO is
also used in the disabling of errno testing for vector function
tests. The relevant conditionals are moved up a function, so that
they take effect before the code that counts the number of tests, so
the inline function tests now accurately report that 0 tests for
exceptions and errno were executed (whereas they previously reported a
large number desipte not running any such tests).
Tested for x86_64 and x86.
* math/test-math-errno.h: New file.
* math/test-math-inline.h (TEST_INLINE): Define to 1 instead of
empty.
(TEST_ERRNO): New macro.
(TEST_EXCEPTIONS): Likewise.
* math/test-math-no-inline.h (TEST_INLINE): Likewise.
(TEST_EXCEPTIONS): Likewise.
* math/test-math-vector.h (TEST_ERRNO): Likewise.
* math/test-double.c: Include "test-math-errno.h".
* math/test-float.c: Likewise.
* math/test-ldouble.c: Likewise.
* math/libm-test.inc (test_single_exception) [!TEST_INLINE]: Make
code unconditional.
(test_exceptions): Only run code if TEST_EXCEPTIONS.
(test_single_errno) [!TEST_INLINE && !TEST_MATHVEC]: Make code
unconditional.
(test_errno): Only run code if TEST_ERRNO.
(enable_test): Use "if" conditional on TEST_INLINE, not #ifdef.
This patch improves the libm test coverage for a few more functions.
Tested for x86_64 and x86.
* math/libm-test.inc (modf_test_data): Add more tests.
(nearbyint_test_data): Likewise.
(nextafter_test_data): Likewise.
(nexttoward_test_data): Likewise.
(pow_test_data): Likewise.
(remainder_test_data): Likewise.
(remquo_test_data): Likewise.
(rint_test_data): Likewise.
For some large arguments, the dbl-64 implementation of remainder gives
zero results with the wrong sign, resulting from a subtraction that is
mathematically correct but does not guarantee that a zero result has
the sign of the first argument to remainder. This patch adds an
appropriate check for this case, similar to other implementations of
remainder in the case of equality, and adds tests of remainder on
inputs already used to test remquo.
Tested for x86_64 and x86.
[BZ #19201]
* sysdeps/ieee754/dbl-64/e_remainder.c (__ieee754_remainder):
Check for zero remainder in case of large exponents and ensure
correct sign of result in that case.
* math/libm-test.inc (remainder_test_data): Add more tests.
nextafter and nexttoward fail to set errno on overflow and underflow.
This patch makes them do so in cases that should include all the cases
where such errno setting is required by glibc's goals for when to set
errno (but not all cases of underflow where the result is nonzero and
so glibc's goals do not require errno setting).
Tested for x86_64, x86, mips64 and powerpc.
[BZ #6799]
* math/s_nextafter.c: Include <errno.h>.
(__nextafter): Set errno on overflow and underflow.
* math/s_nexttowardf.c: Include <errno.h>.
(__nexttowardf): Set errno on overflow and underflow.
* sysdeps/i386/fpu/s_nextafterl.c: Include <errno.h>.
(__nextafterl): Set errno on overflow and underflow.
* sysdeps/i386/fpu/s_nexttoward.c: Include <errno.h>.
(__nexttoward): Set errno on overflow and underflow.
* sysdeps/i386/fpu/s_nexttowardf.c: Include <errno.h>.
(__nexttowardf): Set errno on overflow and underflow.
* sysdeps/ieee754/flt-32/s_nextafterf.c: Include <errno.h>.
(__nextafterf): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-128/s_nextafterl.c: Include <errno.h>.
(__nextafterl): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-128/s_nexttoward.c: Include <errno.h>.
(__nexttoward): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-128/s_nexttowardf.c: Include <errno.h>.
(__nexttowardf): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c: Include <errno.h>.
(__nextafterl): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-128ibm/s_nexttoward.c: Include <errno.h>.
(__nexttoward): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c: Include <errno.h>.
(__nexttowardf): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-96/s_nexttoward.c: Include <errno.h>.
(__nexttoward): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-96/s_nexttowardf.c: Include <errno.h>.
(__nexttowardf): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-opt/s_nexttowardfd.c: Include <errno.h>.
(__nldbl_nexttowardf): Set errno on overflow and underflow.
* sysdeps/m68k/m680x0/fpu/s_nextafterl.c: Include <errno.h>.
(__nextafterl): Set errno on overflow and underflow.
* math/libm-test.inc (nextafter_test_data): Do not allow errno
setting to be missing on overflow. Add more tests.
(nexttoward_test_data): Likewise.
When Bessel functions return a zero result from an infinite argument,
the function oscillates as it approaches 0, so the sign of that zero
result should be indeterminate. This patch weakens the expectations
accordingly not to check the sign of such results (the tests were
causing spurious failures for j1 (-Inf) for ldbl-128).
Tested for x86_64 and x86.
* math/libm-test.inc (j0_test_data): Do not test sign of zero
result from infinite argument.
(j1_test_data): Likewise.
(jn_test_data): Likewise.
(y0_test_data): Likewise.
(y1_test_data): Likewise.
(yn_test_data): Likewise.
The libm drem functions just call the corresponding __remainder
functions. This patch removes the unnecessary wrappers by making them
into weak aliases at the ELF level.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #16171]
* math/w_remainder.c (drem): Define as weak alias of __remainder.
[NO_LONG_DOUBLE] (dreml): Define as weak alias of __remainder.
* math/w_remainderf.c (dremf): Define as weak alias of
__remainderf.
* math/w_remainderl.c (dreml): Define as weak alias of
__remainderl.
* sysdeps/ia64/fpu/e_remainder.S (drem): Define as weak alias of
__remainder.
* sysdeps/ia64/fpu/e_remainderf.S (dremf): Define as weak alias of
__remainderf.
* sysdeps/ia64/fpu/e_remainderl.S (dreml): Define as weak alias of
__remainderl.
* sysdeps/ieee754/ldbl-opt/nldbl-remainder.c (dreml): Define as
weak alias of remainderl.
* sysdeps/ieee754/ldbl-opt/w_remainder.c
[LONG_DOUBLE_COMPAT(libm, GLIBC_2_0)] (__drem): Define as strong
alias of __remainder.
[LONG_DOUBLE_COMPAT(libm, GLIBC_2_0)] (dreml): Use compat_symbol.
* sysdeps/ieee754/ldbl-opt/w_remainderl.c (__dreml): Define as
strong alias of __remainderl.
(dreml): Use long_double_symbol.
* math/Makefile (libm-calls): Remove w_drem.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Remove drem.
(CFLAGS-nldbl-drem.c): Remove variable.
(CFLAGS-nldbl-remainder.c): Add -fno-builtin-dreml.
* math/w_drem.c: Remove file.
* math/w_dremf.c: Likewise.
* math/w_dreml.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-drem.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_drem.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_dreml.c: Likewise.
libm-test.inc has a macro BUILD_COMPLEX to construct a complex number
with given real and imaginary parts while allowing properly for signed
zeroes, infinities and NaNs (which don't work properly with a simple
real + I * imag, in the absence of compiler support for imaginary
types), using assignment to __real__ and __imag__ parts of the number.
C11 defines CMPLX* macros for this purpose, which GCC 4.7 and above
provide suitable built-in functions for. This patch redefines
BUILD_COMPLEX in terms of the standard macros.
Tested for x86_64 and x86.
* math/libm-test.inc (BUILD_COMPLEX): Remove macro.
* math/test-double.h (BUILD_COMPLEX): New macro.
* math/test-float.h (BUILD_COMPLEX): Likewise.
* math/test-ldouble.h (BUILD_COMPLEX): Likewise.
C11 defines standard <float.h> macros *_TRUE_MIN for the least
positive subnormal value of a type. Now that we build with
-std=gnu11, we can use these macros in glibc. This patch replaces
previous uses of the GCC predefines __*_DENORM_MIN__ (used in
<float.h> to define *_TRUE_MIN), as well as *_DENORM_MIN references in
comments.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch). Also tested for powerpc that
installed stripped shared libraries are unchanged by the patch.
* math/libm-test.inc (min_subnorm_value): Use LDBL_TRUE_MIN,
DBL_TRUE_MIN and FLT_TRUE_MIN instead of __LDBL_DENORM_MIN__,
__DBL_DENORM_MIN__ and __FLT_DENORM_MIN__.
* sysdeps/ieee754/dbl-64/s_fma.c (__fma): Refer to DBL_TRUE_MIN
instead of DBL_DENORM_MIN in comment.
* sysdeps/ieee754/ldbl-128/s_fmal.c (__fmal): Refer to
LDBL_TRUE_MIN instead of LDBL_DENORM_MIN in comment.
* sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c: Include <float.h>.
(__nextafterl): Use LDBL_TRUE_MIN instead of __LDBL_DENORM_MIN__.
* sysdeps/ieee754/ldbl-96/s_fmal.c (__fmal): Refer to
LDBL_TRUE_MIN instead of LDBL_DENORM_MIN in comment.
The i386 and x86_64 versions of fesetenv, when called with FE_DFL_ENV
or FE_NOMASK_ENV as argument, do not clear SSE exceptions raised in
MXCSR. These arguments should, like other fenv_t values, represent
the whole of the floating-point state, so such exceptions should be
cleared; this patch adds the required clearing. (Discovered while
working on bug 16068.)
Tested for x86_64 and x86.
[BZ #19181]
* sysdeps/i386/fpu/fesetenv.c (__fesetenv): Clear already-raised
SSE exceptions when argument is FE_DFL_ENV or FE_NOMASK_ENV.
* sysdeps/x86_64/fpu/fesetenv.c (__fesetenv): Likewise.
* math/test-fenv-clear-main.c: New file.
* math/test-fenv-clear.c: Likewise.
* math/Makefile (tests): Add test-fenv-clear.
* sysdeps/x86/fpu/test-fenv-clear-sse.c: New file.
* sysdeps/x86/fpu/Makefile [$(subdir) = math] (tests): Add
test-fenv-clear-sse.
[$(subdir) = math] (CFLAGS-test-fenv-clear-sse.c): New variable.
Now that we build with -std=gnu11, we can use C11 <float.h> macros
such as FLT_DECIMAL_DIG instead of the GCC predefines such as
__FLT_DECIMAL_DIG__ that are used internally in <float.h>. This patch
makes libm-test.inc do so.
Tested for x86_64 and x86.
* math/libm-test.inc (TYPE_DECIMAL_DIG): Use LDBL_DECIMAL_DIG,
DBL_DECIMAL_DIG and FLT_DECIMAL_DIG instead of __DECIMAL_DIG__,
__DBL_DECIMAL_DIG__ and __FLT_DECIMAL_DIG__.
Now that GCC 4.7 or later is required to build glibc, this patch moves
the build from using -std=gnu99 to -std=gnu11 (option added in 4.7).
This allows use of C11 features from GCC's headers, such as new
float.h macros and max_align_t.
Tested for x86_64 and x86 (testsuite; installed stripped shared
libraries are unchanged by the patch on x86_64, while I see some
slight code reordering of no significance on x86).
* Makeconfig (CFLAGS): Use -std=gnu11 instead of -std=gnu99.
* Makefile ($(objpfx)c++-types-check.out): Filter out -std=gnu11
instead of -std=gnu99.
* configure.ac (systemtap): Test with -std=gnu11 instead of
-std=gnu99.
* configure: Regenerated.
* math/gen-auto-libm-tests.c: Use -std=gnu11 instead of -std=gnu99
in compilation command in comment.
libm-test.inc has special-case code treating errors of up to 0.5 ulp
as allowed (for functions that aren't exactly determined) even if no
such errors appeared in libm-test-ulps. This only applies to avoid
errors for individual function calls, not for the overall check of
ulps at the end of testing a function, resulting in confusing output
of the form:
testing double (without inline functions)
Maximal error of `log_upward'
is : 1 ulp
accepted: 0 ulp
with no report of what testcase produced that error. This patch
removes the special case, so that instead you get:
testing double (without inline functions)
Failure: Test: log_upward (0x1.0000000000001p+0)
Result:
is: 2.2204460492503129e-16 0x1.fffffffffffffp-53
should be: 2.2204460492503131e-16 0x1.0000000000000p-52
difference: 2.4651903288156619e-32 0x1.0000000000000p-105
ulp : 0.5000
max.ulp : 0.0000
Maximal error of `log_upward'
is : 1 ulp
accepted: 0 ulp
(for formats other than ldbl-128ibm, 0.5 ulp errors only occur in
unusual cases such as this where the correctly rounded result is a
power of 2 and the computed result is just below it). This should not
affect which cases result in the test failing, just ensure that if it
fails then some failure for an individual function call was reported.
Tested for x86_64 and x86.
* math/libm-test.inc (check_float_internal): Do not special-case
errors up to 0.5 ulp.
j1 and jn can underflow for small arguments, but fail to set errno
when underflowing to 0. This patch fixes them to set errno in that
case.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #18611]
* sysdeps/ieee754/dbl-64/e_j1.c (__ieee754_j1): Set errno and
avoid excess range and precision on underflow.
* sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Likewise.
* sysdeps/ieee754/flt-32/e_j1f.c (__ieee754_j1f): Likewise.
* sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_jnf): Likewise.
* sysdeps/ieee754/ldbl-128/e_j1l.c (__ieee754_j1l): Set errno on
underflow.
* sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_jnl.c (__ieee754_jnl): Likewise.
* sysdeps/ieee754/ldbl-96/e_j1l.c (__ieee754_j1l): Likewise.
* sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise.
* math/auto-libm-test-in: Do not allow missing errno setting for
tests of j1 and jn.
* math/auto-libm-test-out: Regenerated.
The implementations of nearbyint functions using x87 floating point
(i386 all versions, x86_64 long double only) use the fclex
instruction, which clears any exceptions that were raised before the
function was called. These functions must not clear exceptions that
were raised before they were called.
This patch fixes these functions to save and restore the whole
floating-point environment (fnstenv / fldenv) as the way of avoiding
raising "inexact" (recall that there isn't an x87 instruction for
loading just the status word, so the whole environment has to be saved
and loaded instead - the code already saved and loaded the control
word, which is now obtained from the saved environment after this
patch, to disable traps on "inexact"). In the case of the long double
functions, any "invalid" exception from frndint (applied to a
signaling NaN) needs merging into the saved state; this issue doesn't
apply to the float and double functions because that exception would
have been raised when the argument is loaded, before the environment
is saved.
[BZ #15491]
* sysdeps/i386/fpu/s_nearbyint.S (__nearbyint): Save and restore
floating-point environment instead of clearing all exceptions.
* sysdeps/i386/fpu/s_nearbyintf.S (__nearbyintf): Likewise.
* sysdeps/i386/fpu/s_nearbyintl.S (__nearbyintl): Likewise,
merging in "invalid" exceptions from frndint.
* sysdeps/x86_64/fpu/s_nearbyintl.S (__nearbyintl): Likewise.
* math/test-nearbyint-except.c: New file.
* math/Makefile (tests): Add test-nearbyint-except.
This patch improves the libm test coverage for a few more functions.
Tested for x86_64 and x86.
2015-10-21 Joseph Myers <joseph@codesourcery.com>
* math/auto-libm-test-in: Add more tests of hypot, j0, j1, jn,
log, log10 and log2.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (fmod_test_data): Add more tests.
(fpclassify_test_data): Likewise.
(frexp_test_data): Likewise.
(hypot_test_data): Likewise.
(ilogb_test_data): Likewise.
This mostly automatically-generated patch converts 113 function
definitions in glibc from old-style K&R to prototype-style. Following
my other recent such patches, this one deals with the case of function
definitions in files that either contain assertions or where grep
suggested they might contain assertions - and thus where it isn't
possible to use a simple object code comparison as a sanity check on
the correctness of the patch, because line numbers are changed.
A few such automatically-generated changes needed to be supplemented
by manual changes for the result to compile. openat64 had a prototype
declaration with "..." but an old-style definition in
sysdeps/unix/sysv/linux/dl-openat64.c, and "..." needed adding to the
generated prototype in the definition (I've filed
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68024> for diagnosing
such cases in GCC; the old state was undefined behavior not requiring
a diagnostic, but one seems a good idea). In addition, as Florian has
noted regparm attribute mismatches between declaration and definition
are only diagnosed for prototype definitions, and five functions
needed internal_function added to their definitions (in the case of
__pthread_mutex_cond_lock, via the macro definition of
__pthread_mutex_lock) to compile on i386.
After this patch is in, remaining old-style definitions are probably
most readily fixed manually before we can turn on
-Wold-style-definition for all builds.
Tested for x86_64 and x86 (testsuite).
* crypt/md5-crypt.c (__md5_crypt_r): Convert to prototype-style
function definition.
* crypt/sha256-crypt.c (__sha256_crypt_r): Likewise.
* crypt/sha512-crypt.c (__sha512_crypt_r): Likewise.
* debug/backtracesyms.c (__backtrace_symbols): Likewise.
* elf/dl-minimal.c (_itoa): Likewise.
* hurd/hurdmalloc.c (malloc): Likewise.
(free): Likewise.
(realloc): Likewise.
* inet/inet6_option.c (inet6_option_space): Likewise.
(inet6_option_init): Likewise.
(inet6_option_append): Likewise.
(inet6_option_alloc): Likewise.
(inet6_option_next): Likewise.
(inet6_option_find): Likewise.
* io/ftw.c (FTW_NAME): Likewise.
(NFTW_NAME): Likewise.
(NFTW_NEW_NAME): Likewise.
(NFTW_OLD_NAME): Likewise.
* libio/iofwide.c (_IO_fwide): Likewise.
* libio/strops.c (_IO_str_init_static_internal): Likewise.
(_IO_str_init_static): Likewise.
(_IO_str_init_readonly): Likewise.
(_IO_str_overflow): Likewise.
(_IO_str_underflow): Likewise.
(_IO_str_count): Likewise.
(_IO_str_seekoff): Likewise.
(_IO_str_pbackfail): Likewise.
(_IO_str_finish): Likewise.
* libio/wstrops.c (_IO_wstr_init_static): Likewise.
(_IO_wstr_overflow): Likewise.
(_IO_wstr_underflow): Likewise.
(_IO_wstr_count): Likewise.
(_IO_wstr_seekoff): Likewise.
(_IO_wstr_pbackfail): Likewise.
(_IO_wstr_finish): Likewise.
* locale/programs/localedef.c (normalize_codeset): Likewise.
* locale/programs/locarchive.c (add_locale_to_archive): Likewise.
(add_locales_to_archive): Likewise.
(delete_locales_from_archive): Likewise.
* malloc/malloc.c (__libc_mallinfo): Likewise.
* math/gen-auto-libm-tests.c (init_fp_formats): Likewise.
* misc/tsearch.c (__tfind): Likewise.
* nptl/pthread_attr_destroy.c (__pthread_attr_destroy): Likewise.
* nptl/pthread_attr_getdetachstate.c
(__pthread_attr_getdetachstate): Likewise.
* nptl/pthread_attr_getguardsize.c (pthread_attr_getguardsize):
Likewise.
* nptl/pthread_attr_getinheritsched.c
(__pthread_attr_getinheritsched): Likewise.
* nptl/pthread_attr_getschedparam.c
(__pthread_attr_getschedparam): Likewise.
* nptl/pthread_attr_getschedpolicy.c
(__pthread_attr_getschedpolicy): Likewise.
* nptl/pthread_attr_getscope.c (__pthread_attr_getscope):
Likewise.
* nptl/pthread_attr_getstack.c (__pthread_attr_getstack):
Likewise.
* nptl/pthread_attr_getstackaddr.c (__pthread_attr_getstackaddr):
Likewise.
* nptl/pthread_attr_getstacksize.c (__pthread_attr_getstacksize):
Likewise.
* nptl/pthread_attr_init.c (__pthread_attr_init_2_1): Likewise.
(__pthread_attr_init_2_0): Likewise.
* nptl/pthread_attr_setdetachstate.c
(__pthread_attr_setdetachstate): Likewise.
* nptl/pthread_attr_setguardsize.c (pthread_attr_setguardsize):
Likewise.
* nptl/pthread_attr_setinheritsched.c
(__pthread_attr_setinheritsched): Likewise.
* nptl/pthread_attr_setschedparam.c
(__pthread_attr_setschedparam): Likewise.
* nptl/pthread_attr_setschedpolicy.c
(__pthread_attr_setschedpolicy): Likewise.
* nptl/pthread_attr_setscope.c (__pthread_attr_setscope):
Likewise.
* nptl/pthread_attr_setstack.c (__pthread_attr_setstack):
Likewise.
* nptl/pthread_attr_setstackaddr.c (__pthread_attr_setstackaddr):
Likewise.
* nptl/pthread_attr_setstacksize.c (__pthread_attr_setstacksize):
Likewise.
* nptl/pthread_condattr_setclock.c (pthread_condattr_setclock):
Likewise.
* nptl/pthread_create.c (__find_in_stack_list): Likewise.
* nptl/pthread_getattr_np.c (pthread_getattr_np): Likewise.
* nptl/pthread_mutex_cond_lock.c (__pthread_mutex_lock): Define to
use internal_function.
* nptl/pthread_mutex_init.c (__pthread_mutex_init): Convert to
prototype-style function definition.
* nptl/pthread_mutex_lock.c (__pthread_mutex_lock): Likewise.
(__pthread_mutex_cond_lock_adjust): Likewise. Use
internal_function.
* nptl/pthread_mutex_timedlock.c (pthread_mutex_timedlock):
Convert to prototype-style function definition.
* nptl/pthread_mutex_trylock.c (__pthread_mutex_trylock):
Likewise.
* nptl/pthread_mutex_unlock.c (__pthread_mutex_unlock_usercnt):
Likewise.
(__pthread_mutex_unlock): Likewise.
* nptl_db/td_ta_clear_event.c (td_ta_clear_event): Likewise.
* nptl_db/td_ta_set_event.c (td_ta_set_event): Likewise.
* nptl_db/td_thr_clear_event.c (td_thr_clear_event): Likewise.
* nptl_db/td_thr_event_enable.c (td_thr_event_enable): Likewise.
* nptl_db/td_thr_set_event.c (td_thr_set_event): Likewise.
* nss/makedb.c (process_input): Likewise.
* posix/fnmatch.c (__strchrnul): Likewise.
(__wcschrnul): Likewise.
(fnmatch): Likewise.
* posix/fnmatch_loop.c (FCT): Likewise.
* posix/glob.c (globfree): Likewise.
(__glob_pattern_type): Likewise.
(__glob_pattern_p): Likewise.
* posix/regcomp.c (re_compile_pattern): Likewise.
(re_set_syntax): Likewise.
(re_compile_fastmap): Likewise.
(regcomp): Likewise.
(regerror): Likewise.
(regfree): Likewise.
* posix/regexec.c (regexec): Likewise.
(re_match): Likewise.
(re_search): Likewise.
(re_match_2): Likewise.
(re_search_2): Likewise.
(re_search_stub): Likewise. Use internal_function
(re_copy_regs): Likewise.
(re_set_registers): Convert to prototype-style function
definition.
(prune_impossible_nodes): Likewise. Use internal_function.
* resolv/inet_net_pton.c (inet_net_pton): Convert to
prototype-style function definition.
(inet_net_pton_ipv4): Likewise.
* stdlib/strtod_l.c (____STRTOF_INTERNAL): Likewise.
* sysdeps/pthread/aio_cancel.c (aio_cancel): Likewise.
* sysdeps/pthread/aio_suspend.c (aio_suspend): Likewise.
* sysdeps/pthread/timer_delete.c (timer_delete): Likewise.
* sysdeps/unix/sysv/linux/dl-openat64.c (openat64): Likewise.
Make variadic.
* time/strptime_l.c (localtime_r): Convert to prototype-style
function definition.
* wcsmbs/mbsnrtowcs.c (__mbsnrtowcs): Likewise.
* wcsmbs/mbsrtowcs_l.c (__mbsrtowcs_l): Likewise.
* wcsmbs/wcsnrtombs.c (__wcsnrtombs): Likewise.
* wcsmbs/wcsrtombs.c (__wcsrtombs): Likewise.
This automatically-generated patch converts 29 function definitions in
glibc (including one in an example in the manual) from old-style K&R
to prototype-style. Following my other recent such patches, this one
deals with the case of function definitions where one K&R parameter
declaration declares multiple parameters, as in:
void
foo (a, b)
int a, *b;
{
}
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* crypt/crypt.c (_ufc_doit_r): Convert to prototype-style function
definition.
(_ufc_doit_r): Likewise.
* crypt/crypt_util.c (_ufc_copymem): Likewise.
(_ufc_output_conversion_r): Likewise.
* inet/inet_mkadr.c (__inet_makeaddr): Likewise.
* inet/rcmd.c (rcmd_af): Likewise.
(rcmd): Likewise.
(ruserok_af): Likewise.
(ruserok): Likewise.
(ruserok2_sa): Likewise.
(ruserok_sa): Likewise.
(iruserok_af): Likewise.
(iruserok): Likewise.
(__ivaliduser): Likewise.
(__validuser2_sa): Likewise.
* inet/rexec.c (rexec_af): Likewise.
(rexec): Likewise.
* inet/ruserpass.c (ruserpass): Likewise.
* locale/programs/xmalloc.c (xcalloc): Likewise.
* manual/examples/timeval_subtract.c (timeval_subtract): Likewise.
* math/w_drem.c (__drem): Likewise.
* math/w_dremf.c (__dremf): Likewise.
* math/w_dreml.c (__dreml): Likewise.
* misc/daemon.c (daemon): Likewise.
* resolv/res_debug.c (p_fqnname): Likewise.
* stdlib/div.c (div): Likewise.
* string/memcmp.c (memcmp_bytes): Likewise.
* sunrpc/pmap_rmt.c (pmap_rmtcall): Likewise.
* sunrpc/svc_udp.c (svcudp_bufcreate): Likewise.
This patch improves the libm test coverage for a few more functions.
Tested for x86_64 and x86.
* math/libm-test.inc (fabs_test_data): Add more tests.
(fdim_test_data): Likewise.
(fma_test_data): Likewise.
(fmax_test_data): Likewise.
(fmin_test_data): Likewise.
(fmod_test_data): Likewise.
This patch adds more tests for ceil, floor, round and trunc, with a
particular focus on verifying they don't raise spurious "inexact"
exceptions for integer arguments (a C99 / C11 requirement, as opposed
to the general principle that they shouldn't raise "inexact" for any
arguments at all which is a TS 18661-1 requirement).
Tested for x86_64 and x86.
* math/libm-test.inc (ceil_test_data): Add more tests and more
expectations for "inexact".
(floor_test_data): Add more tests.
(round_test_data): Likewise.
(trunc_test_data): Likewise.
The dbl-64, ldbl-96 and ldbl-128 implementations of lrint and llrint
fail to produce "invalid" exceptions in cases where the rounded result
overflows the target type, but truncating the floating-point argument
to the next integer towards zero does not overflow it (so in
particular casts do not produce such exceptions). (This issue cannot
arise for float, or for double with 64-bit target type, or for ldbl-96
with 64-bit target type and negative arguments, because of
insufficient precision in the floating-point type for arguments with
the relevant property to exist. It also obviously cannot arise in
FE_TOWARDZERO mode.)
This patch fixes these problems by inserting checks for the special
cases that can occur in each implementation, and explicitly raising
FE_INVALID (and avoiding the cast if it might raise spurious
FE_INEXACT, while raising FE_INEXACT explicitly in the cases where it
is needed; unlike lround and llround, FE_INEXACT is required, not
optional, for these functions for a within-range inexact result).
The fixes are conditional on FE_INVALID or FE_INEXACT being defined.
If any future architecture supports one but not both of those
exceptions, the code will fail to compile and need fixing to handle
that case (this seemed better than conditioning on both macros being
defined, resulting in code that would compile but quietly miss
exceptions on such a system).
Tested for x86_64, x86 and mips64. Tested the ldbl-96 changes (only
relevant for ia64, it appears) on x86_64 by removing the x86_64
versions of lrintl / llrintl.
[BZ #19094]
* sysdeps/ieee754/dbl-64/s_lrint.c: Include <fenv.h> and
<limits.h>.
(__lrint) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception
when result overflows but exception would not result from cast.
* sysdeps/ieee754/ldbl-128/s_llrintl.c: Include <fenv.h> and
<limits.h>.
(__llrintl) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception
when result overflows but exception would not result from cast.
* sysdeps/ieee754/ldbl-128/s_lrintl.c: Include <fenv.h> and
<limits.h>.
(__lrintl) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception
when result overflows but exception would not result from cast.
* sysdeps/ieee754/ldbl-96/s_llrintl.c: Include <fenv.h> and
<limits.h>.
(__llrintl) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception
when result overflows but exception would not result from cast.
* sysdeps/ieee754/ldbl-96/s_lrintl.c: Include <fenv.h> and
<limits.h>.
(__lrintl) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception
when result overflows but exception would not result from cast.
* math/libm-test.inc (lrint_test_data): Add more tests.
(llrint_test_data): Likewise.
I noticed that some of my recently added tests of lround and llround
wrongly expected the "inexact" exception to be absent for certain
within-range non-integer arguments. (It's unspecified whether this
exception is present or not for within-range non-integer arguments; it
mustn't be present for integer arguments and out-of-range arguments.)
This patch corrects those expectations.
Tested for x86_64 and x86.
* math/libm-test.inc (lround_test_data): Do not expect the absence
of "inexact" for some tests with non-integer arguments.
(llround_test_data): Likewise.
The dbl-64, ldbl-96 and ldbl-128 implementations of lround and llround
fail to produce "invalid" exceptions in cases where the rounded result
overflows the target type, but truncating the floating-point argument
to the next integer towards zero does not overflow it (so in
particular casts do not produce such exceptions). (This issue cannot
arise for float, or for double with 64-bit target type, or for ldbl-96
with 64-bit target type and negative arguments, because of
insufficient precision in the floating-point type for arguments with
the relevant property to exist.)
This patch fixes these problems by inserting checks for the special
cases that can occur in each implementation, and explicitly raising
FE_INVALID (and avoiding the cast if it might raise spurious
FE_INEXACT).
Tested for x86_64, x86 and mips64.
[BZ #19088]
* sysdeps/ieee754/dbl-64/s_lround.c: Include <fenv.h> and
<limits.h>.
(__lround) [FE_INVALID]: Force FE_INVALID exception when result
overflows but exception would not result from cast.
* sysdeps/ieee754/dbl-64/wordsize-64/s_lround.c: Include <fenv.h>
and <limits.h>.
(__lround) [FE_INVALID]: Force FE_INVALID exception when result
overflows but exception would not result from cast.
* sysdeps/ieee754/ldbl-128/s_llroundl.c: Include <fenv.h> and
<limits.h>.
(__llroundl) [FE_INVALID]: Force FE_INVALID exception when result
overflows but exception would not result from cast.
* sysdeps/ieee754/ldbl-128/s_lroundl.c: Include <fenv.h> and
<limits.h>.
(__lroundl) [FE_INVALID]: Force FE_INVALID exception when result
overflows but exception would not result from cast.
* sysdeps/ieee754/ldbl-96/s_llroundl.c: Include <fenv.h> and
<limits.h>.
(__llroundl) [FE_INVALID]: Force FE_INVALID exception when result
overflows but exception would not result from cast.
* sysdeps/ieee754/ldbl-96/s_lroundl.c: Include <fenv.h> and
<limits.h>.
(__lroundl) [FE_INVALID]: Force FE_INVALID exception when result
overflows but exception would not result from cast.
* math/libm-test.inc (lround_test_data): Add more tests.
(llround_test_data): Likewise.
This patch adds more tests of lrint, llrint, lround and llround, to
cover various standard special cases not previously covered, and more
tests of overflow.
Tested for x86_64 and x86.
* math/libm-test.inc (lrint_test_data): Add more tests.
(llrint_test_data): Likewise.
(lround_test_data): Likewise.
(llround_test_data): Likewise.
This patch makes lrint and llrint use the same test inputs in
libm-test.inc, appropriately conditioned on LONG_MAX in the lrint
case.
Tested for x86_64 and x86.
* math/libm-test.inc (lrint_test_data): Add tests used for llrint.
(llrint_test_data): Add tests used for lrint.
This patch adds more libm-test.inc expectations for the "inexact"
exception for scalb, in all cases except those with a non-integer
second argument (where results are unspecified by POSIX, so the
function does not count as fully determined and the spurious "inexact"
exceptions raised by the existing implementations alongside "invalid"
are OK).
Tested for x86_64 and x86.
* math/libm-test.inc (scalb_test_data): Add more expectations for
the "inexact" exception.
The ldbl-96 version of lroundl is incorrect for systems with 64-bit
long when the argument's absolute value is just below a power of 2,
2^32 or more, and rounds up to the next integer; in such cases, it
returns 0. The problem is incrementing the high part of the mantissa
loses the high bit of the value (which is not an issue for any other
floating-point format, and is handled specially in lround when the bit
corresponding to 0.5 was in the high part rather than the low part).
This patch fixes this in a similar way to that used in llroundl:
storing the high part in an unsigned long variable before incrementing
it, so problems cannot occur in the case when this code is reachable.
I improved test coverage for both lround and llround by making them
use the same test inputs (appropriately conditioned on the size of
long in the lround case) - complete with the same comments, to make
comparison as easy as possible. (This test coverage improvement was
how I found the lroundl bug.)
Tested for x86_64 and x86.
[BZ #19071]
* sysdeps/ieee754/ldbl-96/s_lroundl.c (__lroundl): Use unsigned
long int variable to store possibly incremented high part of
mantissa.
* math/libm-test.inc (lround_test_data): Add tests used for
llround. Use [LONG_MAX > 0x7fffffff] consistently as condition
for tests requiring 64-bit long. Do not condition tests on
[TEST_FLOAT] unnecessarily.
(llround_test_data): Add tests used for lround. Add another
expectation for the "inexact" exception. Do not condition tests
on [TEST_FLOAT] unnecessarily.
ISO C requires overflowing results from nexttoward to be the
appropriate infinity independent of the rounding mode, but some
implementations use a rounding-mode-dependent result (this is the same
issue as was fixed for nextafter in bug 16677). This patch fixes the
problem by making the nexttoward implementations discard the result
from the floating-point computation that forced an overflow exception
and then return the infinity previously computed with integer
arithmetic.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #19059]
* math/s_nexttowardf.c (__nexttowardf): Do not return value from
overflowing computation.
* sysdeps/i386/fpu/s_nexttoward.c (__nexttoward): Likewise.
* sysdeps/i386/fpu/s_nexttowardf.c (__nexttowardf): Likewise.
* sysdeps/ieee754/ldbl-128/s_nexttoward.c (__nexttoward):
Likewise.
* sysdeps/ieee754/ldbl-128/s_nexttowardf.c (__nexttowardf):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_nexttoward.c (__nexttoward):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c (__nexttowardf):
Likewise.
* sysdeps/ieee754/ldbl-96/s_nexttoward.c (__nexttoward): Likewise.
* sysdeps/ieee754/ldbl-96/s_nexttowardf.c (__nexttowardf):
Likewise.
* sysdeps/ieee754/ldbl-opt/s_nexttowardfd.c (__nldbl_nexttowardf):
Likewise.
* math/libm-test.inc (nexttoward_test_data): Add more tests.
The ldbl-128 / ldbl-128ibm implementation of lgamma has problems with
its handling of large arguments. It has an overflow threshold that is
correct only for ldbl-128, despite being used for both types - with
diagnostic control macros as a temporary measure to disable warnings
about that constant overflowing for ldbl-128ibm - and it has a
calculation that's roughly x * log(x) - x, resulting in overflows for
arguments that are roughly at most a factor 1/log(threshold) below the
overflow threshold.
This patch fixes both issues, using an overflow threshold appropriate
for the type in question and adding another case for large arguments
that avoids the possible intermediate overflow.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #16347]
[BZ #19046]
* sysdeps/ieee754/ldbl-128/e_lgammal_r.c: Do not include
<libc-internal.h>.
(MAXLGM): Do not use diagnostic control macros.
[LDBL_MANT_DIG == 106] (MAXLGM): Change value to overflow
threshold for ldbl-128ibm.
(__ieee754_lgammal_r): For large arguments, multiply by log - 1
instead of multiplying by log then subtracting.
* math/auto-libm-test-in: Add more tests of lgamma.
* math/auto-libm-test-out: Regenerated.
When libm-test.inc prints the results of failing tests, the output can
be unhelpful for ldbl-128 and ldbl-128ibm because the precision used
is insufficient to distinguish values of those types, resulting in
reported values that look identical but differ by a large number of
ulps.
This patch changes it to use a precision appropriate for the type, for
both decimal and hex output (so output for float is more compact,
output for ldbl-128 and ldbl-128ibm is substantially wider). The
natural precision to use for decimal is given by the C11 <float.h>
macros such as FLT_DECIMAL_DIG. GCC's <float.h> only defines those in
C11 mode, so this patch uses the predefines such as
__FLT_DECIMAL_DIG__ (added in GCC 4.6) instead; if we move to building
with -std=gnu11 (or -std=gnu1x if we can't get rid of 4.6 support).
Tested for powerpc and mips64.
* math/libm-test.inc (TYPE_DECIMAL_DIG): New macro.
(TYPE_HEX_DIG): Likewise.
(print_float): Use TYPE_DECIMAL_DIG - 1 and TYPE_HEX_DIG - 1 as
precisions when printing floating-point numbers.
(check_float_internal): Likewise.
The i386 versions of acoshf and acosh raise a spurious "invalid"
exception for an argument that is a quiet NaN with the sign bit set.
The integer arithmetic to detect arguments < 1 also detects -NaN, and
then the computation 0 / 0 in that case raises the exception. This
patch fixes this by using (x - x) / (x - x) as the computation in that
case instead, which will always raise the exception for non-NaN
arguments reaching that code, but not for quiet NaN arguments.
Tested for x86_64 and x86.
[BZ #19032]
* sysdeps/i386/fpu/e_acosh.S (__ieee754_acosh): For arguments < 1,
compute result as (x - x) / (x - x) not as 0 / 0.
* sysdeps/i386/fpu/e_acoshf.S (__ieee754_acoshf): Likewise.
* math/libm-test.inc (acosh_test_data): Add another test of acosh.
This patch improves test coverage of the real libm functions [a-e]*,
ensuring that special cases and ranges of input values of potential
significance (such as close to overflow and underflow thresholds) are
more systematically covered.
This is a followup to
<https://sourceware.org/ml/libc-alpha/2013-12/msg00757.html> which
covered [a-c]* (however, I found more weaknesses in the coverage of
those functions when preparing this patch, hence the additional tests
being added for them here).
Addition of a test for acosh (-qNaN) is temporarily deferred, to be
included as part of a fix for bug 19032 which was discovered in the
course of adding these tests (and which illustrates the use of testing
-qNaN as well as +qNaN as input even to functions for which the sign
of a NaN isn't meant to be significant).
Tested for x86_64 and x86.
* math/auto-libm-test-in: Add more tests of acos, acosh, asin,
atan, atan2, atanh, cbrt, cos, cosh, erf, erfc, exp, exp10, exp2
and expm1.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (acos_test_data): Add more tests.
(asin_test_data): Likewise.
(asinh_test_data): Likewise.
(atan_test_data): Likewise.
(atanh_test_data): Likewise.
(atan2_test_data): Likewise.
(cbrt_test_data): Likewise.
(ceil_test_data): Likewise.
(copysign_test_data): Likewise.
(cos_test_data): Likewise.
(cosh_test_data): Likewise.
(erf_test_data): Likewise.
(erfc_test_data): Likewise.
(exp_test_data): Likewise.
(exp10_test_data): Likewise.
(exp2_test_data): Likewise.
(expm1_test_data): Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Update.
This patch makes math/libm-test.inc more consistent regarding
including expectations for errno setting and "inexact" exceptions
where expected test results are given manually. Mostly this is a
matter of including ERRNO_UNCHANGED in expectations, but there are
also some cases where expectations regarding "inexact" were missing
for exactly determined functions (especially in cases where some other
exception was expected and it should also have been expected that
"inexact" was not set with that other exception), and one case for pow
where the NO_INEXACT_EXCEPTION expectation should not have been there
(the rule about not having "inexact" exceptions for NaN arguments is
only when those NaN arguments produce NaN results).
I deferred making such changes for complex functions and scalb.
Tested for x86_64 and x86.
* math/libm-test.inc (acos_test_data): Refine expectations for
errno and "inexact" exceptions.
(acosh_test_data): Likewise.
(asin_test_data): Likewise.
(asinh_test_data): Likewise.
(atan_test_data): Likewise.
(atanh_test_data): Likewise.
(atan2_test_data): Likewise.
(cbrt_test_data): Likewise.
(ceil_test_data): Likewise.
(copysign_test_data): Likewise.
(cosh_test_data): Likewise.
(erf_test_data): Likewise.
(erfc_test_data): Likewise.
(exp_test_data): Likewise.
(exp10_test_data): Likewise.
(exp2_test_data): Likewise.
(expm1_test_data): Likewise.
(fabs_test_data): Likewise.
(floor_test_data): Likewise.
(fma_test_data): Likewise.
(fmax_test_data): Likewise.
(fmin_test_data): Likewise.
(fmod_test_data): Likewise.
(fpclassify_test_data): Likewise.
(frexp_test_data): Likewise.
(hypot_test_data): Likewise.
(ilogb_test_data): Likewise.
(isgreater_test_data): Likewise.
(isgreaterequal_test_data): Likewise.
(isinf_test_data): Likewise.
(isless_test_data): Likewise.
(islessequal_test_data): Likewise.
(islessgreater_test_data): Likewise.
(isnan_test_data): Likewise.
(isnormal_test_data): Likewise.
(issignaling_test_data): Likewise.
(isunordered_test_data): Likewise.
(j0_test_data): Likewise.
(j1_test_data): Likewise.
(jn_test_data): Likewise.
(lgamma_test_data): Likewise.
(lrint_test_data): Likewise.
(llrint_test_data): Likewise.
(log_test_data): Likewise.
(log10_test_data): Likewise.
(log1p_test_data): Likewise.
(log2_test_data): Likewise.
(logb_test_data): Likewise.
(lround_test_data): Likewise.
(llround_test_data): Likewise.
(modf_test_data): Likewise.
(nearbyint_test_data): Likewise.
(nextafter_test_data): Likewise.
(nexttoward_test_data): Likewise.
(pow_test_data): Likewise.
(remainder_test_data): Likewise.
(remquo_test_data): Likewise.
(rint_test_data): Likewise.
(round_test_data): Likewise.
(signbit_test_data): Likewise.
(sinh_test_data): Likewise.
(sqrt_test_data): Likewise.
(tanh_test_data): Likewise.
(tgamma_test_data): Likewise.
(trunc_test_data): Likewise.
(y0_test_data): Likewise.
(y1_test_data): Likewise.
(yn_test_data): Likewise.
(significand_test_data): Likewise.
For arguments with X^2 + Y^2 close to 1, clog and clog10 avoid large
errors from log(hypot) by computing X^2 + Y^2 - 1 in a way that avoids
cancellation error and then using log1p.
However, the thresholds for using that approach still result in log
being used on argument as large as sqrt(13/16) > 0.9, leading to
significant errors, in some cases above the 9ulp maximum allowed in
glibc libm. This patch arranges for the approach using log1p to be
used in any cases where |X|, |Y| < 1 and X^2 + Y^2 >= 0.5 (with the
existing allowance for cases where one of X and Y is very small),
adjusting the __x2y2m1 functions to work with the wider range of
inputs. This way, log only gets used on arguments below sqrt(1/2) (or
substantially above 1), where the error involved is much less.
Tested for x86_64, x86, mips64 and powerpc. For the ulps regeneration
I removed the existing clog and clog10 ulps before regenerating to
allow any reduced ulps to appear. Tests added include those found by
random test generation to produce large ulps either before or after
the patch, and some found by trying inputs close to the (0.75, 0.5)
threshold where the potential errors from using log are largest.
[BZ #19016]
* sysdeps/generic/math_private.h (__x2y2m1f): Update comment to
allow more cases with X^2 + Y^2 >= 0.5.
* sysdeps/ieee754/dbl-64/x2y2m1.c (__x2y2m1): Likewise. Add -1 as
normal element in sum instead of special-casing based on values of
arguments.
* sysdeps/ieee754/dbl-64/x2y2m1f.c (__x2y2m1f): Update comment.
* sysdeps/ieee754/ldbl-128/x2y2m1l.c (__x2y2m1l): Likewise. Add
-1 as normal element in sum instead of special-casing based on
values of arguments.
* sysdeps/ieee754/ldbl-128ibm/x2y2m1l.c (__x2y2m1l): Likewise.
* sysdeps/ieee754/ldbl-96/x2y2m1.c [FLT_EVAL_METHOD != 0]
(__x2y2m1): Update comment.
* sysdeps/ieee754/ldbl-96/x2y2m1l.c (__x2y2m1l): Likewise. Add -1
as normal element in sum instead of special-casing based on values
of arguments.
* math/s_clog.c (__clog): Handle more cases using log1p without
hypot.
* math/s_clog10.c (__clog10): Likewise.
* math/s_clog10f.c (__clog10f): Likewise.
* math/s_clog10l.c (__clog10l): Likewise.
* math/s_clogf.c (__clogf): Likewise.
* math/s_clogl.c (__clogl): Likewise.
* math/auto-libm-test-in: Add more tests of clog and clog10.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
The flt-32 version of powf can be inaccurate because of bugs in the
extra-precision calculation of (x-1)/(x+1) or (x-1.5)/(x+1.5) as part
of calculating log(x) with extra precision: a constant used (as part
of adding 1 or 1.5 through integer arithmetic) is incorrect, and then
the code fails to mask a computed high part before using it in
arithmetic that relies on s_h*t_h being exactly representable. This
patch fixes these bugs.
Tested for x86_64 and x86. x86_64 ulps for powf removed and
regenerated to reflect reduced ulps from the increased accuracy for
existing tests.
[BZ #18956]
* sysdeps/ieee754/flt-32/e_powf.c (__ieee754_powf): Add 0x00400000
not 0x0040000 for high bit of mantissa. Mask with 0xfffff000 when
extracting high part.
* math/auto-libm-test-in: Add another test of pow.
* math/auto-libm-test-out: Regenerated.
* sysdeps/x86_64/fpu/libm-test-ulps: Update.
Similar to various other bugs in this area, pow functions can fail to
raise the underflow exception when the result is tiny and inexact but
one or more low bits of the intermediate result that is scaled down
(or, in the i386 case, converted from a wider evaluation format) are
zero. This patch forces the exception in a similar way to previous
fixes, thereby concluding the fixes for known bugs with missing
underflow exceptions currently filed in Bugzilla.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #18825]
* sysdeps/i386/fpu/i386-math-asm.h (FLT_NARROW_EVAL_UFLOW_NONNAN):
New macro.
(DBL_NARROW_EVAL_UFLOW_NONNAN): Likewise.
(LDBL_CHECK_FORCE_UFLOW_NONNAN): Likewise.
* sysdeps/i386/fpu/e_pow.S: Use DEFINE_DBL_MIN.
(__ieee754_pow): Use DBL_NARROW_EVAL_UFLOW_NONNAN instead of
DBL_NARROW_EVAL, reloading the PIC register as needed.
* sysdeps/i386/fpu/e_powf.S: Use DEFINE_FLT_MIN.
(__ieee754_powf): Use FLT_NARROW_EVAL_UFLOW_NONNAN instead of
FLT_NARROW_EVAL. Use separate return path for case when first
argument is NaN.
* sysdeps/i386/fpu/e_powl.S: Include <i386-math-asm.h>. Use
DEFINE_LDBL_MIN.
(__ieee754_powl): Use LDBL_CHECK_FORCE_UFLOW_NONNAN, reloading the
PIC register.
* sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Use
math_check_force_underflow_nonneg.
* sysdeps/ieee754/flt-32/e_powf.c (__ieee754_powf): Force
underflow for subnormal result.
* sysdeps/ieee754/ldbl-128/e_powl.c (__ieee754_powl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_powl.c (__ieee754_powl): Use
math_check_force_underflow_nonneg.
* sysdeps/x86/fpu/powl_helper.c (__powl_helper): Use
math_check_force_underflow.
* sysdeps/x86_64/fpu/x86_64-math-asm.h
(LDBL_CHECK_FORCE_UFLOW_NONNAN): New macro.
* sysdeps/x86_64/fpu/e_powl.S: Include <x86_64-math-asm.h>. Use
DEFINE_LDBL_MIN.
(__ieee754_powl): Use LDBL_CHECK_FORCE_UFLOW_NONNAN.
* math/auto-libm-test-in: Add more tests of pow.
* math/auto-libm-test-out: Regenerated.
Similar to various other bugs in this area, hypot functions can fail
to raise the underflow exception when the result is tiny and inexact
but one or more low bits of the intermediate result that is scaled
down (or, in the i386 case, converted from a wider evaluation format)
are zero. This patch forces the exception in a similar way to
previous fixes.
Note that this issue cannot arise for implementations of hypotf using
double (or wider) for intermediate evaluation (if hypotf should
underflow, that means the double square root is being computed of some
number of the form N*2^-298, for 0 < N < 2^46, which is exactly
represented as a double, and whatever the rounding mode such a square
root cannot have a mantissa with all zeroes after the initial 23
bits). Thus no changes are made to hypotf implementations in this
patch, only to hypot and hypotl.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #18803]
* sysdeps/i386/fpu/e_hypot.S: Use DEFINE_DBL_MIN.
(MO): New macro.
(__ieee754_hypot) [PIC]: Load PIC register.
(__ieee754_hypot): Use DBL_NARROW_EVAL_UFLOW_NONNEG instead of
DBL_NARROW_EVAL.
* sysdeps/ieee754/dbl-64/e_hypot.c (__ieee754_hypot): Use
math_check_force_underflow_nonneg in case where result might be
tiny.
* sysdeps/ieee754/ldbl-128/e_hypotl.c (__ieee754_hypotl):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_hypotl.c (__ieee754_hypotl):
Likewise.
* sysdeps/ieee754/ldbl-96/e_hypotl.c (__ieee754_hypotl): Likewise.
* sysdeps/powerpc/fpu/e_hypot.c (__ieee754_hypot): Likewise.
* math/auto-libm-test-in: Add more tests of hypot.
* math/auto-libm-test-out: Regenerated.
Where glibc code needs to avoid excess range and precision in
floating-point arithmetic, code variously uses either asms or volatile
to force the results of that arithmetic to memory; mostly this is
conditional on FLT_EVAL_METHOD, but in the case of lrint / llrint
functions some use of volatile is unconditional (and is present
unnecessarily in versions for long double). This patch make such code
use the recently-added math_narrow_eval macro consistently, removing
the unnecessary uses of volatile in long double lrint / llrint
implementations completely.
Tested for x86_64, x86, mips64 and powerpc.
* math/s_nexttowardf.c (__nexttowardf): Use math_narrow_eval.
* stdlib/strtod_l.c: Include <math_private.h>.
(overflow_value): Use math_narrow_eval.
(underflow_value): Likewise.
* sysdeps/i386/fpu/s_nexttoward.c (__nexttoward): Likewise.
* sysdeps/i386/fpu/s_nexttowardf.c (__nexttowardf): Likewise.
* sysdeps/ieee754/dbl-64/e_gamma_r.c (gamma_positive): Likewise.
(__ieee754_gamma_r): Likewise.
* sysdeps/ieee754/dbl-64/gamma_productf.c (__gamma_productf):
Likewise.
* sysdeps/ieee754/dbl-64/k_rem_pio2.c (__kernel_rem_pio2):
Likewise.
* sysdeps/ieee754/dbl-64/lgamma_neg.c (__lgamma_neg): Likewise.
* sysdeps/ieee754/dbl-64/s_erf.c (__erfc): Likewise.
* sysdeps/ieee754/dbl-64/s_llrint.c (__llrint): Likewise.
* sysdeps/ieee754/dbl-64/s_lrint.c (__lrint): Likewise.
* sysdeps/ieee754/flt-32/e_gammaf_r.c (gammaf_positive): Likewise.
(__ieee754_gammaf_r): Likewise.
* sysdeps/ieee754/flt-32/k_rem_pio2f.c (__kernel_rem_pio2f):
Likewise.
* sysdeps/ieee754/flt-32/lgamma_negf.c (__lgamma_negf): Likewise.
* sysdeps/ieee754/flt-32/s_erff.c (__erfcf): Likewise.
* sysdeps/ieee754/flt-32/s_llrintf.c (__llrintf): Likewise.
* sysdeps/ieee754/flt-32/s_lrintf.c (__lrintf): Likewise.
* sysdeps/ieee754/ldbl-128/s_llrintl.c (__llrintl): Do not use
volatile.
* sysdeps/ieee754/ldbl-128/s_lrintl.c (__lrintl): Likewise.
* sysdeps/ieee754/ldbl-128/s_nexttoward.c (__nexttoward): Use
math_narrow_eval.
* sysdeps/ieee754/ldbl-128ibm/s_nexttoward.c (__nexttoward):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c (__nexttowardf):
Likewise.
* sysdeps/ieee754/ldbl-96/gamma_product.c (__gamma_product):
Likewise.
* sysdeps/ieee754/ldbl-96/s_llrintl.c (__llrintl): Do not use
volatile.
* sysdeps/ieee754/ldbl-96/s_lrintl.c (__lrintl): Likewise.
* sysdeps/ieee754/ldbl-96/s_nexttoward.c (__nexttoward): Use
math_narrow_eval.
* sysdeps/ieee754/ldbl-96/s_nexttowardf.c (__nexttowardf):
Likewise.
* sysdeps/ieee754/ldbl-opt/s_nexttowardfd.c (__nldbl_nexttowardf):
Likewise.
built-ins when available. Since going through the PLT is expensive for these small functions,
inlining results in major speedups (about 7x on Cortex-A57 for isinf). The GCC built-ins are not
correct if signalling NaN support is required, and thus are turned off in that case (see GCC bug
66462). The test-snan.c tests sNaNs and so must be explicitly built with -fsignaling-nans.
2015-09-18 Wilco Dijkstra <wdijkstr@arm.com>
[BZ #15367]
[BZ #17441]
* math/Makefile: Build test-snan.c with -fsignaling-nans.
* math/math.h (fpclassify): Use __builtin_fpclassify when
available. (signbit): Use __builtin_signbit(f/l).
(isfinite): Use__builtin_isfinite. (isnormal): Use
__builtin_isnormal. (isnan): Use __builtin_isnan.
(isinf): Use __builtin_isinf_sign.
C99/C11 Annex G specifies the sign of the zero part of the result of
ctan (x +/- i * Inf) and ctanh (+/-Inf + i * y). This patch fixes glibc
to follow that specification, along the lines I described in my review
of Andreas's previous patch for this issue
<https://sourceware.org/ml/libc-alpha/2014-08/msg00142.html>.
Tested for x86_64.
2015-09-17 Joseph Myers <joseph@codesourcery.com>
Andreas Schwab <schwab@suse.de>
[BZ #17118]
* math/s_ctan.c (__ctan): Determine sign of zero real part of
result when imaginary part of argument is infinite using sine and
cosine.
* math/s_ctanf.c (__ctanf): Likewise.
* math/s_ctanl.c (__ctanl): Likewise.
* math/s_ctanh.c (__ctanh): Determine sign of zero imaginary part
of result when real part of argument is infinite using sine and
cosine.
* math/s_ctanhf.c (__ctanhf): Likewise.
* math/s_ctanhl.c (__ctanhl): Likewise.
* math/libm-test.inc (ctan_test_data): Add more tests of ctan.
(ctanh_test_data): Add more tests of ctanh.
Similar to various other bugs in this area, tgamma functions can fail
to raise the underflow exception when the result is tiny and inexact
but one or more low bits of the intermediate result that is scaled
down are zero. This patch forces the exception in a similar way to
previous fixes.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #18951]
* sysdeps/ieee754/dbl-64/e_gamma_r.c (__ieee754_gamma_r): Force
underflow exception for small results.
* sysdeps/ieee754/flt-32/e_gammaf_r.c (__ieee754_gammaf_r):
Likewise.
* sysdeps/ieee754/ldbl-128/e_gammal_r.c (__ieee754_gammal_r):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c (__ieee754_gammal_r):
Likewise.
* sysdeps/ieee754/ldbl-96/e_gammal_r.c (__ieee754_gammal_r):
Likewise.
* math/auto-libm-test-in: Add more tests of tgamma.
* math/auto-libm-test-out: Regenerated.
As noted in bug 6803, scalbn fails to set errno on overflow and
underflow. This patch fixes this by making scalbn an alias of ldexp,
which has exactly the same semantics (for floating-point types with
radix 2) and already has wrappers that deal with setting errno,
instead of an alias of the internal __scalbn (which ldexp calls).
Notes:
* Where compat symbols were defined for scalbn functions, I didn't
change what they point to (to keep the patch minimal), so such
compat symbols continue to go directly to the non-errno-setting
functions.
* Mike, I didn't do anything with the IA64 versions of these
functions, where I think both the ldexp and scalbn functions already
deal with setting errno. As a cleanup (not needed to fix this bug)
however you might want to make those functions into aliases for
IA64; there is no need for them to be separate function
implementations at all.
* This concludes the fix for bug 6803 since the scalb and scalbln
cases of that bug were fixed some time ago.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #6803]
* math/s_ldexp.c (scalbn): Define as weak alias of __ldexp.
[NO_LONG_DOUBLE] (scalbnl): Define as weak alias of __ldexp.
* math/s_ldexpf.c (scalbnf): Define as weak alias of __ldexpf.
* math/s_ldexpl.c (scalbnl): Define as weak alias of __ldexpl.
* sysdeps/i386/fpu/s_scalbn.S (scalbn): Remove alias.
* sysdeps/i386/fpu/s_scalbnf.S (scalbnf): Likewise.
* sysdeps/i386/fpu/s_scalbnl.S (scalbnl): Likewise.
* sysdeps/ieee754/dbl-64/s_scalbn.c (scalbn): Likewise.
[NO_LONG_DOUBLE] (scalbnl): Likewise.
* sysdeps/ieee754/dbl-64/wordsize-64/s_scalbn.c (scalbn):
Likewise.
[NO_LONG_DOUBLE] (scalbnl): Likewise.
* sysdeps/ieee754/flt-32/s_scalbnf.c (scalbnf): Likewise.
* sysdeps/ieee754/ldbl-128/s_scalbnl.c (scalbnl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_scalbnl.c (scalbnl): Remove
long_double_symbol calls.
* sysdeps/ieee754/ldbl-64-128/s_scalbnl.c (scalbnl): Likewise.
* sysdeps/ieee754/ldbl-opt/s_ldexpl.c (__ldexpl_2): Define as
strong alias of __ldexpl.
(scalbnl): Define using long_double_symbol.
* sysdeps/m68k/m680x0/fpu/s_scalbn.c (__CONCATX(scalbn,suffix)):
Remove alias.
* sysdeps/sparc/sparc64/soft-fp/s_scalbnl.c (scalbnl): Likewise.
* sysdeps/x86_64/fpu/s_scalbnl.S (scalbnl): Likewise.
* math/libm-test.inc (scalbn_test_data): Add errno expectations.
(scalbln_test_data): Add more errno expectations.
math.h incorrectly declares various functions for XSI POSIX 2001 and
2008 editions. gamma was removed in the 2001 edition but is still
declared, along with gammaf and gammal which were never standard
functions. isnan is still declared as a function, along with isnanf
and isnanl which were never standard functions, although in 2001 the
function was replaced by the type-generic macro. scalbf and scalbl
are declared although never standard, and scalb was removed in the
2008 edition but is still declared. The scalb type-generic macro in
tgmath.h shouldn't be present for any POSIX version, since POSIX never
had such a type-generic macro.
This patch disables all those declarations in the relevant cases (as a
minimal fix, it leaves them enabled for __USE_MISC). For the matter
of declaring scalb but not scalbf or scalbl for the 2001 edition, a
new macro __MATH_DECLARING_DOUBLE is added, defined by math.h around
includes of bits/mathcalls.h, for bits/mathcalls.h to use to test
which type's functions are being declared.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
[BZ #18967]
* math/math.h (__MATH_DECLARING_DOUBLE): New macro. Define and
undefine around includes of <bits/mathcalls.h>.
* math/bits/mathcalls.h [!__USE_MISC && __USE_XOPEN2K] (isnan): Do
not declare function.
[!__USE_MISC && __USE_XOPEN2K] (gamma): Likewise.
[!__USE_MISC && (!__MATH_DECLARING_DOUBLE || __USE_XOPEN2K8)]
(scalb): Likewise.
* math/tgmath.h [!__USE_MISC && __USE_XOPEN_EXTENDED] (scalb): Do
not define macro.
* conform/Makefile (test-xfail-XOPEN2K/math.h/conform): Remove
variable.
(test-xfail-XOPEN2K/tgmath.h/conform): Likewise.
(test-xfail-XOPEN2K8/math.h/conform): Likewise.
(test-xfail-XOPEN2K8/tgmath.h/conform): Likewise.
Bug 16296 notes that fegetround is a pure function and should be
marked as such in fenv.h. This patch implements that.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by this patch).
[BZ #16296]
* math/fenv.h (fegetround): Use __attribute_pure__.
* include/fenv.h (__fegetround): Likewise.
Similar to various other bugs in this area, ctan and ctanh can fail to
raise the underflow exception for some cases of results that are tiny
and inexact. This patch forces the exception in a similar way to
previous fixes.
Tested for x86_64 and x86.
[BZ #18595]
* math/s_ctan.c (__ctan): Force underflow exception for results
whose real or imaginary part has small absolute value.
* math/s_ctanf.c (__ctanf): Likewise.
* math/s_ctanh.c (__ctanh): Likewise.
* math/s_ctanhf.c (__ctanhf): Likewise.
* math/s_ctanhl.c (__ctanhl): Likewise.
* math/s_ctanl.c (__ctanl): Likewise.
* math/auto-libm-test-in: Do not allow missing underflow for ctan
and ctanh. Add more tests of ctan and ctanh.
On i386, the double version of exp10 can miss underflow exceptions if
the result is in the subnormal range for double but the last 11 bits
of the 64-bit extended-precision mantissa happen to be zero. This
patch forces the exception in a similar way to previous fixes.
As with the exp2 and exp fixes, the exp10f changes may in fact not be
needed to ensure underflow exceptions, but are included for
consistency and to fix the exp10 part of bug 18875 by ensuring that
excess range and precision is removed from underflowing return values.
Tested for x86_64 and x86.
[BZ #18875]
[BZ #18966]
* sysdeps/i386/fpu/e_exp10.S (dbl_min): New object.
(MO): New macro.
(__ieee754_exp10): For small results, force underflow exception
and remove excess range and precision from return value.
* sysdeps/i386/fpu/e_exp10f.S (flt_min): New object.
(MO): New macro.
(__ieee754_exp10f): For small results, force underflow exception
and remove excess range and precision from return value.
* math/auto-libm-test-in: Add more tests of exp10.
* math/auto-libm-test-out: Regenerated.
On i386, the double version of exp can miss underflow exceptions if
the result is in the subnormal range for double but the last 11 bits
of the 64-bit extended-precision mantissa happen to be zero. This
patch forces the exception in a similar way to previous fixes.
As with the exp2 fixes, the expf changes may in fact not be needed to
ensure underflow exceptions, but are included for consistency and to
fix the exp part of bug 18875 by ensuring that excess range and
precision is removed from underflowing return values.
Tested for x86_64 and x86.
[BZ #18875]
[BZ #18961]
* sysdeps/i386/fpu/e_exp.S (dbl_min): New object.
(MO): New macro.
(__ieee754_exp): For small results, force underflow exception and
remove excess range and precision from return value.
(__exp_finite): Likewise.
* sysdeps/i386/fpu/e_expf.S (flt_min): New object.
(MO): New macro.
(__ieee754_expf): For small results, force underflow exception and
remove excess range and precision from return value.
(__expf_finite): Likewise.
* math/auto-libm-test-in: Add more tests of exp.
* math/auto-libm-test-out: Regenerated.
Various exp2 implementations in glibc can miss underflow exceptions
when the scaling down part of the calculation is exact (or, in the x86
case, when the conversion from extended precision to the target
precision is exact). This patch forces the exception in a similar way
to previous fixes.
The x86 exp2f changes may in fact not be needed for this purpose -
it's likely to be the case that no argument of type float has an exp2
result so close to an exact subnormal float value that it equals that
value when rounded to 64 bits (even taking account of variation
between different x86 implementations). However, they are included
for consistency with the changes to exp2 and so as to fix the exp2f
part of bug 18875 by ensuring that excess range and precision is
removed from underflowing return values.
Tested for x86_64, x86 and mips64.
[BZ #16521]
[BZ #18875]
* math/e_exp2l.c (__ieee754_exp2l): Force underflow exception for
small results.
* sysdeps/i386/fpu/e_exp2.S (dbl_min): New object.
(MO): New macro.
(__ieee754_exp2): For small results, force underflow exception and
remove excess range and precision from return value.
* sysdeps/i386/fpu/e_exp2f.S (flt_min): New object.
(MO): New macro.
(__ieee754_exp2f): For small results, force underflow exception
and remove excess range and precision from return value.
* sysdeps/i386/fpu/e_exp2l.S (ldbl_min): New object.
(MO): New macro.
(__ieee754_exp2l): Force underflow exception for small results.
* sysdeps/ieee754/dbl-64/e_exp2.c (__ieee754_exp2): Likewise.
* sysdeps/ieee754/flt-32/e_exp2f.c (__ieee754_exp2f): Likewise.
* sysdeps/x86_64/fpu/e_exp2l.S (ldbl_min): New object.
(MO): New macro.
(__ieee754_exp2l): Force underflow exception for small results.
* math/auto-libm-test-in: Add more tests or exp2.
* math/auto-libm-test-out: Regenerated.
This patch adds more libm test inputs found through random test
generation to increase previously known ulps. This particular test
generation was run for mips64, so most of the increased ulps are for
ldbl-128 (float and double having been fairly well covered by such
testing for x86_64), but there's the odd ulps increase for other
formats.
Tested for x86_64, x86 and mips64.
* math/auto-libm-test-in: Add more tests of acos, acosh, asin,
asinh, atan, atan2, atanh, cabs, carg, cos, csqrt, erfc, exp,
exp10, exp2, log, log1p, log2, pow, sin, sincos, sinh, tan and
tanh.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
The ldbl-128 / ldbl-128ibm implementation of lgammal converts (the
floor of minus) non-integer negative arguments to int to determine the
value of signgam. When those values are outside the range of int,
this produces spurious "invalid" exceptions and incorrect values of
signgam. This patch fixes this by instead determining signgam through
comparing half the integer in question to floor of half the integer.
Tested for mips64, x86_64 and x86.
[BZ #18952]
* sysdeps/ieee754/ldbl-128/e_lgammal_r.c (__ieee754_lgammal_r): Do
not convert non-integer negative arguments to int to determine the
value of signgam.
* math/auto-libm-test-in: Add more tests of lgamma.
* math/auto-libm-test-out: Regenerated.
This patch adds more libm test inputs found through random test
generation to increase observed ulps on x86_64.
Tested for x86_64 and x86.
* math/auto-libm-test-in: Add more tests of acosh, atanh, cbrt,
cosh, csqrt, erfc, expm1 and lgamma.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
The existing implementations of lgamma functions (except for the ia64
versions) use the reflection formula for negative arguments. This
suffers large inaccuracy from cancellation near zeros of lgamma (near
where the gamma function is +/- 1).
This patch fixes this inaccuracy. For arguments above -2, there are
no zeros and no large cancellation, while for sufficiently large
negative arguments the zeros are so close to integers that even for
integers +/- 1ulp the log(gamma(1-x)) term dominates and cancellation
is not significant. Thus, it is only necessary to take special care
about cancellation for arguments around a limited number of zeros.
Accordingly, this patch uses precomputed tables of relevant zeros,
expressed as the sum of two floating-point values. The log of the
ratio of two sines can be computed accurately using log1p in cases
where log would lose accuracy. The log of the ratio of two gamma(1-x)
values can be computed using Stirling's approximation (the difference
between two values of that approximation to lgamma being computable
without computing the two values and then subtracting), with
appropriate adjustments (which don't reduce accuracy too much) in
cases where 1-x is too small to use Stirling's approximation directly.
In the interval from -3 to -2, using the ratios of sines and of
gamma(1-x) can still produce too much cancellation between those two
parts of the computation (and that interval is also the worst interval
for computing the ratio between gamma(1-x) values, which computation
becomes more accurate, while being less critical for the final result,
for larger 1-x). Because this can result in errors slightly above
those accepted in glibc, this interval is instead dealt with by
polynomial approximations. Separate polynomial approximations to
(|gamma(x)|-1)(x-n)/(x-x0) are used for each interval of length 1/8
from -3 to -2, where n (-3 or -2) is the nearest integer to the
1/8-interval and x0 is the zero of lgamma in the relevant half-integer
interval (-3 to -2.5 or -2.5 to -2).
Together, the two approaches are intended to give sufficient accuracy
for all negative arguments in the problem range. Outside that range,
the previous implementation continues to be used.
Tested for x86_64, x86, mips64 and powerpc. The mips64 and powerpc
testing shows up pre-existing problems for ldbl-128 and ldbl-128ibm
with large negative arguments giving spurious "invalid" exceptions
(exposed by newly added tests for cases this patch doesn't affect the
logic for); I'll address those problems separately.
[BZ #2542]
[BZ #2543]
[BZ #2558]
* sysdeps/ieee754/dbl-64/e_lgamma_r.c (__ieee754_lgamma_r): Call
__lgamma_neg for arguments from -28.0 to -2.0.
* sysdeps/ieee754/flt-32/e_lgammaf_r.c (__ieee754_lgammaf_r): Call
__lgamma_negf for arguments from -15.0 to -2.0.
* sysdeps/ieee754/ldbl-128/e_lgammal_r.c (__ieee754_lgammal_r):
Call __lgamma_negl for arguments from -48.0 or -50.0 to -2.0.
* sysdeps/ieee754/ldbl-96/e_lgammal_r.c (__ieee754_lgammal_r):
Call __lgamma_negl for arguments from -33.0 to -2.0.
* sysdeps/ieee754/dbl-64/lgamma_neg.c: New file.
* sysdeps/ieee754/dbl-64/lgamma_product.c: Likewise.
* sysdeps/ieee754/flt-32/lgamma_negf.c: Likewise.
* sysdeps/ieee754/flt-32/lgamma_productf.c: Likewise.
* sysdeps/ieee754/ldbl-128/lgamma_negl.c: Likewise.
* sysdeps/ieee754/ldbl-128/lgamma_productl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/lgamma_negl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/lgamma_productl.c: Likewise.
* sysdeps/ieee754/ldbl-96/lgamma_negl.c: Likewise.
* sysdeps/ieee754/ldbl-96/lgamma_product.c: Likewise.
* sysdeps/ieee754/ldbl-96/lgamma_productl.c: Likewise.
* sysdeps/generic/math_private.h (__lgamma_negf): New prototype.
(__lgamma_neg): Likewise.
(__lgamma_negl): Likewise.
(__lgamma_product): Likewise.
(__lgamma_productl): Likewise.
* math/Makefile (libm-calls): Add lgamma_neg and lgamma_product.
* math/auto-libm-test-in: Add more tests of lgamma.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
The uninitialized variable warnings in math/ having been fixed for all
the supported floating-point formats, this patch removes the use of
-Wno-uninitialized there, continuing with the goal of avoiding -Wno-
options in makefiles as far as possible..
Tested for x86_64 and x86 (full build and testsuite runs), and for
powerpc and mips64 (verified that glibc builds without errors).
* math/Makefile (CFLAGS): Don't add -Wno-uninitialized.
The csqrt implementations in glibc can miss underflow exceptions when
the real or imaginary part of the result becomes tiny in the course of
scaling down (in particular, multiplication by 0.5) and that scaling
is exact although the relevant part of the mathematical result isn't.
This patch forces the exception in a similar way to previous fixes.
Tested for x86_64 and x86.
[BZ #18370]
* math/s_csqrt.c (__csqrt): Force underflow exception for results
whose real or imaginary part has small absolute value.
* math/s_csqrtf.c (__csqrtf): Likewise.
* math/s_csqrtl.c (__csqrtl): Likewise.
* math/auto-libm-test-in: Add more tests of csqrt.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
The csqrt functions scale up small arguments to avoid underflows when
calling hypot functions. However, even when hypot does not underflow,
a subsequent calculation of 0.5 * hypot can underflow. This patch
duly increases the threshold and scale factor to avoid such underflows
as well.
Tested for x86_64, x86 and mips64.
[BZ #18823]
* math/s_csqrt.c (__csqrt): Increase threshold and scale factor
for scaling up small arguments.
* math/s_csqrtf.c (__csqrtf): Likewise.
* math/s_csqrtl.c (__csqrtl): Likewise.
* math/auto-libm-test-in: Add more tests of csqrt.
* math/auto-libm-test-out: Regenerated.
Various fma implementations have logic that, when computing fma (x, y,
z) where z is large (so care needs taking to avoid internal overflow)
but x * y is small, scale x * y up instead of down to avoid internal
underflows resulting from scaling down. (In these cases, x * y is
small enough that only its sign actually matters rather than the exact
value.)
The threshold for scaling up instead of down was correct for "if the
unscaled values were multiplied, the low part of the multiplication
could underflow", and the scaling was sufficient to ensure that the
low part of the multiplication did not underflow (given that cases of
very small x * y - less than half the least subnormal - were
previously dealt with). However, the choice in the functions wasn't
between scaling up or no scaling, but between scaling up and scaling
down (scaling down actually being needed when x * y isn't so small
compared to z and so the exact value does matter). Thus a larger
threshold is needed to ensure that scaling down doesn't produce values
the multiplication of whose low parts underflows. This patch
increases the thresholds accordingly.
Tested for x86_64, x86 and mips64 (with the MIPS version of s_fmal.c
removed so that the ldbl-128 version gets tested instead of the
soft-fp one).
[BZ #18824]
* sysdeps/ieee754/dbl-64/s_fma.c (__fma): Increase threshold for
scaling x * y up instead of down.
* sysdeps/ieee754/ldbl-128/s_fmal.c (__fmal): Likewise.
* sysdeps/ieee754/ldbl-96/s_fmal.c (__fmal): Likewise.
* math/auto-libm-test-in: Add more tests of fma.
* math/auto-libm-test-out: Regenerated.
This patch adds more test inputs to various libm functions found
through random generation to have larger ulps errors than previously
listed in libm-test-ulp, on at least one of x86_64 and x86.
Tested for x86_64 and x86.
* math/auto-libm-test-in: Add more tests of acos, acosh, asin,
asinh, atan, atan2, atanh, cabs, cbrt, cosh, csqrt, erf, erfc,
exp, exp2, lgamma, log, log1p, log2, pow, sin, sincos, tan, tanh
and tgamma.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
Similar to various other bugs in this area, some tanh implementations
do not raise the underflow exception for subnormal arguments, when the
result is tiny and inexact. This patch forces the exception in a
similar way to previous fixes.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #16520]
* sysdeps/ieee754/dbl-64/s_tanh.c: Include <float.h>.
(__tanh): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/flt-32/s_tanhf.c: Include <float.h>.
(__tanhf): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/ldbl-128/s_tanhl.c: Include <float.h>.
(__tanhl): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/ldbl-128ibm/s_tanhl.c: Include <float.h>.
(__tanhl): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/ldbl-96/s_tanhl.c: Include <float.h>.
(__tanhl): Force underflow exception for arguments with small
absolute value.
* math/auto-libm-test-in: Add more tests of tanh.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
This patch adds more tests of various libm functions found through
random test generation to give increased ulps on 32-bit x86.
Tested for x86_64 and x86.
* math/auto-libm-test-in: Add more tests of acosh, asin, asinh,
atanh, cabs, carg, cbrt, cosh, csqrt, erf, erfc, exp, exp10,
expm1, hypot, log, log10, log1p, log2, pow, sinh, tan and tgamma.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
ldbl-128ibm tanhl uses a too-small threshold to decide when to return
+/-1, resulting in large errors. This patch changes it to a more
appropriate threshold (the requirement is for 2*exp(-2|x|) to be small
in terms of ulps of 1).
Tested for x86_64, x86 and powerpc.
[BZ #18790]
* sysdeps/ieee754/ldbl-128ibm/s_tanhl.c (__tanhl): Increase
threshold for returning +/- 1.
* math/auto-libm-test-in: Add more tests of tanh.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
ldbl-128ibm sinhl uses a too-big threshold to decide when to return
the argument, resulting in large errors. This patch fixes it to use a
more appropriate threshold.
Tested for x86_64, x86 and powerpc.
[BZ #18789]
* sysdeps/ieee754/ldbl-128ibm/e_sinhl.c (__ieee754_sinhl): Use
smaller threshold for returning the argument.
* math/auto-libm-test-in: Add more tests of sinh.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
Similar to various other bugs in this area, some tan implementations
do not raise the underflow exception for subnormal arguments, when the
result is tiny and inexact. This patch forces the exception in a
similar way to previous fixes.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #16517]
* sysdeps/ieee754/dbl-64/s_tan.c: Include <float.h>.
(tan): Force underflow exception for arguments with small absolute
value.
* sysdeps/ieee754/flt-32/k_tanf.c: Include <float.h>.
(__kernel_tanf): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-128/k_tanl.c: Include <float.h>.
(__kernel_tanl): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-128ibm/k_tanl.c: Include <float.h>.
(__kernel_tanl): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-96/k_tanl.c: Include <float.h>.
(__kernel_tanl): Force underflow exception for arguments with
small absolute value.
* math/auto-libm-test-in: Add more tests of tan.
* math/auto-libm-test-out: Regenerated.
Similar to various other bugs in this area, some sinh implementations
do not raise the underflow exception for subnormal arguments, when the
result is tiny and inexact. This patch forces the exception in a
similar way to previous fixes.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #16519]
* sysdeps/ieee754/dbl-64/e_sinh.c: Include <float.h>.
(__ieee754_sinh): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/flt-32/e_sinhf.c: Include <float.h>.
(__ieee754_sinhf): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-128/e_sinhl.c: Include <float.h>.
(__ieee754_sinhl): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-128ibm/e_sinhl.c: Include <float.h>.
(__ieee754_sinhl): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-96/e_sinhl.c: Include <float.h>.
(__ieee754_sinhl): Force underflow exception for arguments with
small absolute value.
* math/auto-libm-test-in: Add more tests of sinh.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
The flt-32 implementation of powf wrongly uses x-1 instead of |x|-1
when computing log (x) for the case where |x| is close to 1 and y is
large. This patch fixes the logic accordingly. Relevant tests
existed for x close to 1, and corresponding tests are added for x
close to -1, as well as for some new variant cases.
Tested for x86_64 and x86.
[BZ #18647]
* sysdeps/ieee754/flt-32/e_powf.c (__ieee754_powf): For large y
and |x| close to 1, use absolute value of x when computing log.
* math/auto-libm-test-in: Add more tests of pow.
* math/auto-libm-test-out: Regenerated.
These tests were skipped by the use-test-skeleton conversion done in
commit 29955b5d because they were reused in other tests via the #include
directive, and so deemed worth an inspection before they were modified.
This has now been done.
ChangeLog:
2015-07-09 Arjun Shankar <arjun.is@lostca.se>
* elf/tst-leaks1.c (main): Converted to ...
(do_test): ... this.
(TEST_FUNCTION): New macro.
Include test-skeleton.c.
* localedata/tst-langinfo.c (main): Converted to ...
(do_test): ... this.
(TEST_FUNCTION): New macro.
Include test-skeleton.c.
* math/test-fpucw.c (main): Converted to ...
(do_test): ... this.
(TEST_FUNCTION): New macro.
Include test-skeleton.c.
* math/test-tgmath.c (main): Converted to ...
(do_test): ... this.
(TEST_FUNCTION): New macro.
Include test-skeleton.c.
* math/test-tgmath2.c (main): Converted to ...
(do_test): ... this.
(TEST_FUNCTION): New macro.
Include test-skeleton.c.
* setjmp/tst-setjmp.c (main): Converted to ...
(do_test): ... this.
(TEST_FUNCTION): New macro.
Include test-skeleton.c.
* stdio-common/tst-sscanf.c (main): Converted to ...
(do_test): ... this.
(TEST_FUNCTION): New macro.
Include test-skeleton.c.
* sysdeps/x86_64/tst-audit6.c (main): Converted to ...
(do_test): ... this.
(TEST_FUNCTION): New macro.
Include test-skeleton.c.
On tile (and any other machine with no FP exceptions) the
feenable_test() function will generate a "function defined but
not used" warning because all of the callers are commented out.
We already were ifdef'ing out the body of the function, so instead
just ifdef out the entire function if FE_ALL_EXCEPT == 0.
In non-default rounding modes, tgamma can be slightly less accurate
than permitted by glibc's accuracy goals.
Part of the problem is error accumulation, addressed in this patch by
setting round-to-nearest for internal computations. However, there
was also a bug in the code dealing with computing pow (x + n, x + n)
where x + n is not exactly representable, providing another source of
error even in round-to-nearest mode; it was necessary to address both
bugs to get errors for all testcases within glibc's accuracy goals.
Given this second fix, accuracy in round-to-nearest mode is also
improved (hence regeneration of ulps for tgamma should be from scratch
- truncate libm-test-ulps or at least remove existing tgamma entries -
so that the expected ulps can be reduced).
Some additional complications also arose. Certain tgamma tests should
strictly, according to IEEE semantics, overflow or not depending on
the rounding mode; this is beyond the scope of glibc's accuracy goals
for any function without exactly-determined results, but
gen-auto-libm-tests doesn't handle being lax there as it does for
underflow. (libm-test.inc also doesn't handle being lax about whether
the result in cases very close to the overflow threshold is infinity
or a finite value close to overflow, but that doesn't cause problems
in this case though I've seen it cause problems with random test
generation for some functions.) Thus, spurious-overflow markings,
with a comment, are added to auto-libm-test-in (no bug in Bugzilla
because the issue is with the testsuite, not a user-visible bug in
glibc). And on x86, after the patch I saw ERANGE issues as previously
reported by Carlos (see my commentary in
<https://sourceware.org/ml/libc-alpha/2015-01/msg00485.html>), which
needed addressing by ensuring excess range and precision were
eliminated at various points if FLT_EVAL_METHOD != 0.
I also noticed and fixed a cosmetic issue where 1.0f was used in long
double functions and should have been 1.0L.
This completes the move of all functions to testing in all rounding
modes with ALL_RM_TEST, so gen-libm-have-vector-test.sh is updated to
remove the workaround for some functions not using ALL_RM_TEST.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #18613]
* sysdeps/ieee754/dbl-64/e_gamma_r.c (gamma_positive): Take log of
X_ADJ not X when adjusting exponent.
(__ieee754_gamma_r): Do intermediate computations in
round-to-nearest then adjust overflowing and underflowing results
as needed.
* sysdeps/ieee754/flt-32/e_gammaf_r.c (gammaf_positive): Take log
of X_ADJ not X when adjusting exponent.
(__ieee754_gammaf_r): Do intermediate computations in
round-to-nearest then adjust overflowing and underflowing results
as needed.
* sysdeps/ieee754/ldbl-128/e_gammal_r.c (gammal_positive): Take
log of X_ADJ not X when adjusting exponent.
(__ieee754_gammal_r): Do intermediate computations in
round-to-nearest then adjust overflowing and underflowing results
as needed. Use 1.0L not 1.0f as numerator of division.
* sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c (gammal_positive): Take
log of X_ADJ not X when adjusting exponent.
(__ieee754_gammal_r): Do intermediate computations in
round-to-nearest then adjust overflowing and underflowing results
as needed. Use 1.0L not 1.0f as numerator of division.
* sysdeps/ieee754/ldbl-96/e_gammal_r.c (gammal_positive): Take log
of X_ADJ not X when adjusting exponent.
(__ieee754_gammal_r): Do intermediate computations in
round-to-nearest then adjust overflowing and underflowing results
as needed. Use 1.0L not 1.0f as numerator of division.
* math/libm-test.inc (tgamma_test_data): Remove one test. Moved
to auto-libm-test-in.
(tgamma_test): Use ALL_RM_TEST.
* math/auto-libm-test-in: Add one test of tgamma. Mark some other
tests of tgamma with spurious-overflow.
* math/auto-libm-test-out: Regenerated.
* math/gen-libm-have-vector-test.sh: Do not check for START.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
The ldbl-128 implementation of j1l produces spurious underflow
exceptions for some small arguments, as a result of squaring the
argument. This patch fixes it just to use a linear approximation for
sufficiently small arguments, and then to force an underflow exception
only in the cases where it is required.
Tested for mips64.
[BZ #18612]
* sysdeps/ieee754/ldbl-128/e_j1l.c (__ieee754_j1l): For small
arguments, just return 0.5 times the argument, with underflow
forced as needed.
* math/auto-libm-test-in: Add more tests of j1.
* math/auto-libm-test-out: Regenerated.
Similar to various other bugs in this area, j1 and jn implementations
can fail to raise the underflow exception when the internal
computation is exact although the actual function is inexact. This
patch forces the exception in a similar way to other such fixes. (The
ldbl-128 / ldbl-128ibm j1l implementation is different and doesn't
need a change for this until spurious underflows in it are fixed.)
Tested for x86_64, x86, mips64 and powerpc.
[BZ #16559]
* sysdeps/ieee754/dbl-64/e_j1.c: Include <float.h>.
(__ieee754_j1): Force underflow exception for small results.
* sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Likewise.
* sysdeps/ieee754/flt-32/e_j1f.c: Include <float.h>.
(__ieee754_j1f): Force underflow exception for small results.
* sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_jnf): Likewise.
* sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_jnl.c (__ieee754_jnl): Likewise.
* sysdeps/ieee754/ldbl-96/e_j1l.c: Include <float.h>.
(__ieee754_j1l): Force underflow exception for small results.
* sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise.
* math/auto-libm-test-in: Add more tests of j1 and jn.
* math/auto-libm-test-out: Regenerated.
Some existing jn tests, if run in non-default rounding modes, produce
errors above those accepted in glibc, which causes problems for moving
tests of jn to use ALL_RM_TEST. This patch makes jn set rounding
to-nearest internally, as was done for yn some time ago, then computes
the appropriate underflowing value for results that underflowed to
zero in to-nearest, and moves the tests to ALL_RM_TEST. It does
nothing about the general inaccuracy of Bessel function
implementations in glibc, though it should make jn more accurate on
average in non-default rounding modes through reduced error
accumulation. The recomputation of results that underflowed to zero
should as a side-effect fix some cases of bug 16559, where jn just
used an exact zero, but that is *not* the goal of this patch and other
cases of that bug remain unfixed.
(Most of the changes in the patch are reindentation to add new scopes
for SET_RESTORE_ROUND*.)
Tested for x86_64, x86, powerpc and mips64.
[BZ #16559]
[BZ #18602]
* sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Set
round-to-nearest internally then recompute results that
underflowed to zero in the original rounding mode.
* sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_jnf): Likewise.
* sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_jnl.c (__ieee754_jnl): Likewise.
* sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise
* math/libm-test.inc (jn_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
cexp, ccos, ccosh, csin and csinh have spurious underflows in cases
where they compute sin of the smallest normal, that produces an
underflow exception (depending on which sin implementation is in use)
but the final result does not underflow. ctan and ctanh may also have
such underflows, or they may be latent (the issue there is that
e.g. ctan (DBL_MIN) should, rounded upwards, be the next double value
above DBL_MIN, which under glibc's accuracy goals may not have an
underflow exception, but the intermediate computation of sin (DBL_MIN)
would legitimately underflow on before-rounding architectures).
This patch fixes all those functions so they use plain comparisons (>
DBL_MIN etc.) instead of comparing the result of fpclassify with
FP_SUBNORMAL (in all these cases, we already know the number being
compared is finite). Note that in the case of csin / csinf / csinl,
there is no need for fabs calls in the comparison because the real
part has already been reduced to its absolute value.
As the patch fixes the failures that previously obstructed moving
tests of cexp to use ALL_RM_TEST, those tests are moved to ALL_RM_TEST
by the patch (two functions remain yet to be converted).
Tested for x86_64 and x86 and ulps updated accordingly.
[BZ #18594]
* math/s_ccosh.c (__ccosh): Compare with least normal value
instead of comparing class with FP_SUBNORMAL.
* math/s_ccoshf.c (__ccoshf): Likewise.
* math/s_ccoshl.c (__ccoshl): Likewise.
* math/s_cexp.c (__cexp): Likewise.
* math/s_cexpf.c (__cexpf): Likewise.
* math/s_cexpl.c (__cexpl): Likewise.
* math/s_csin.c (__csin): Likewise.
* math/s_csinf.c (__csinf): Likewise.
* math/s_csinh.c (__csinh): Likewise.
* math/s_csinhf.c (__csinhf): Likewise.
* math/s_csinhl.c (__csinhl): Likewise.
* math/s_csinl.c (__csinl): Likewise.
* math/s_ctan.c (__ctan): Likewise.
* math/s_ctanf.c (__ctanf): Likewise.
* math/s_ctanh.c (__ctanh): Likewise.
* math/s_ctanhf.c (__ctanhf): Likewise.
* math/s_ctanhl.c (__ctanhl): Likewise.
* math/s_ctanl.c (__ctanl): Likewise.
* math/auto-libm-test-in: Add more tests of ccos, ccosh, cexp,
csin, csinh, ctan and ctanh.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (cexp_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch moves most tests of csin and csinh with finite inputs from
libm-test.inc to auto-libm-test-in. The remaining two tests of each
function with small arguments are not moved because moving them causes
the time required by gen-auto-libm-tests to go up from under 8 seconds
to over 11 minutes for me. (The current development version of MPC
has had speed improvements for mpc_sin for some time, but there hasn't
been a release containing those improvements yet.)
Tested for x86_64 and x86.
* math/auto-libm-test-in: Add more tests of csin and csinh.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (csin_test_data): Remove tests moved to
auto-libm-test-in.
(csinh_test_data): Likewise.
csin and csinh can produce bad results when overflowing in directed
rounding modes, because a multiplication that can overflow is followed
by a possible negation. This patch fixes this by negating one of the
arguments of the multiplication before the multiplication instead of
negating the result.
The new tests for this issue are added to auto-libm-test-in, starting
use of that file for csin and csinh. The issue was found in the
course of moving existing tests for csin and csinh (existing tests, by
being enabled in more cases than previously, showed the issue for
float and double but not for long double); that move will now be done
separately.
Tested for x86_64 and x86 and ulps updated accordingly.
[BZ #18593]
* math/s_csin.c (__csin): Negate before rather than after possibly
overflowing multiplication.
* math/s_csinf.c (__csinf): Likewise.
* math/s_csinh.c (__csinh): Likewise.
* math/s_csinhf.c (__csinhf): Likewise.
* math/s_csinhl.c (__csinhl): Likewise.
* math/s_csinl.c (__csinl): Likewise.
* math/auto-libm-test-in: Add some tests of csin and csinh.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (csin_test_data): Use AUTO_TESTS_c_c.
(csinh_test_data): Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Update.
Similar to various other bugs in this area, some sin and sincos
implementations do not raise the underflow exception for subnormal
arguments, when the result is tiny and inexact. This patch forces the
exception in a similar way to previous fixes.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #16526]
[BZ #16538]
* sysdeps/ieee754/dbl-64/s_sin.c: Include <float.h>.
(__sin): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/flt-32/k_sinf.c: Include <float.h>.
(__kernel_sinf): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-128/k_sincosl.c: Include <float.h>.
(__kernel_sincosl): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-128/k_sinl.c: Include <float.h>.
(__kernel_sinl): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-128ibm/k_sincosl.c: Include <float.h>.
(__kernel_sincosl): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-128ibm/k_sinl.c: Include <float.h>.
(__kernel_sinl): Force underflow exception for arguments with
small absolute value.
* sysdeps/ieee754/ldbl-96/k_sinl.c: Include <float.h>.
(__kernel_sinl): Force underflow exception for arguments with
small absolute value.
* sysdeps/powerpc/fpu/k_sinf.c: Include <float.h>.
(__kernel_sinf): Force underflow exception for arguments with
small absolute value.
* math/auto-libm-test-in: Add more tests of sin and sincos.
* math/auto-libm-test-out: Regenerated.
__kernel_standard_l converts long double arguments to double for use
in SVID "struct exception". This has special-case handling for when
that conversion would overflow or underflow but the original long
double function wouldn't. However, it turns out that "inexact"
exceptions can be spurious here as well, when the function is exactly
determined and __kernel_standard_l is being called for a domain error.
This patch fixes this by using feholdexcept / fesetenv to avoid
exceptions from the conversion, replacing the previous special-case
logic for overflow and underflow (this covers all functions using
__kernel_standard_l, not just those that actually need a change, since
there doesn't seem to be much point in restricting things just to the
functions that mustn't get "inexact" here).
Tested for x86_64 and x86.
[BZ #18245]
[BZ #18583]
* sysdeps/ieee754/k_standardl.c: Include <fenv.h>.
(__kernel_standard_l): Use feholdexcept and fesetenv around
conversion to double instead of special-casing overflow and
underflow.
* math/libm-test.inc (fmod_test_data): Add more tests.
(remainder_test_data): Likewise.
(sqrt_test_data): Likewise.
Since the libmvec tests went in I've noticed build failures from
parallel testing in math/, when those tests start building before
libm-test.c has been fully generated. (This only applies if libm test
sources have been modified after the original glibc build, because
otherwise libm-test.stmp was generated during the original build and
doesn't get regenerated during testing.)
Those tests depend on libm-test.stmp, but the dependency uses
$(libmvec-tests), which is set in the sysdeps Makefile fragments, and
appears before the inclusion of ../Rules, which is what includes those
fragments; thus, the dependency does not work and parallel make can
start building the vector tests too soon. This patch moves the
dependency further down so that the required variable is defined when
the dependency is.
Tested for x86_64.
* math/Makefile [$(PERL) != no]
($(addprefix $(objpfx), $(addsuffix .o, $(libm-vec-tests)))): Move
dependency on libm-test.stmp below the inclusion of Rules.
The csqrt implementations in glibc can cause spurious underflows in
some cases as a side-effect of the scaling for large arguments (when
underflow is correct for the square root of the argument that was
scaled down to avoid overflow, but not for the original argument).
This patch arranges to avoid the underflowing intermediate computation
(eliminating a multiplication in 0.5 in the problem cases where a
subsequent scaling by 2 would follow).
Tested for x86_64 and x86 and ulps updated accordingly (only needed
for x86).
[BZ #18371]
* math/s_csqrt.c (__csqrt): Avoid multiplication by 0.5 where
intermediate but not final result might underflow.
* math/s_csqrtf.c (__csqrtf): Likewise.
* math/s_csqrtl.c (__csqrtl): Likewise.
* math/auto-libm-test-in: Add more tests of csqrt.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
The dbl-64 and flt-32 implementations of exp2 functions produce
spurious underflow exceptions. The underlying reason is the same in
both cases: the computation works as (2^a - 1)*2^b + 2^b for suitably
chosen a and b, where a has small magnitude so 2^a - 1 can be computed
with a low-degree polynomial approximation, and (2^a - 1)*2^b can
underflow even when the final result does not. This patch fixes this
by adjusting the threshold for when scaling is used to avoid
intermediate underflow so it works for any possible value of a where
the final result would not underflow.
Tested for x86_64 and x86.
[BZ #18219]
* sysdeps/ieee754/dbl-64/e_exp2.c (__ieee754_exp2): Reduce
threshold on absolute value of exponent for which scaling is used.
* sysdeps/ieee754/flt-32/e_exp2f.c (__ieee754_exp2f): Likewise.
* math/auto-libm-test-in: Add more tests of exp2.
* math/auto-libm-test-out: Regenerated.
Similar to various other bugs in this area, some expm1 implementations
do not raise the underflow exception for subnormal arguments, when the
result is tiny and inexact. This patch forces the exception in a
similar way to previous fixes.
(The issue does not apply to the ldbl-* implementations or to those
for x86 / x86_64 long double. The change to
sysdeps/ieee754/dbl-64/wordsize-64/e_cosh.c is one I missed when
previously fixing bug 16354; the bug in that implementation was
previously latent, but the expm1 fixes stopped it being latent and so
required it to be fixed to avoid spurious underflows from cosh.)
Tested for x86_64 and x86.
[BZ #16353]
* sysdeps/i386/fpu/s_expm1.S (dbl_min): New object.
(__expm1): Force underflow exception for arguments with small
absolute value.
* sysdeps/i386/fpu/s_expm1f.S (flt_min): New object.
(__expm1f): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/dbl-64/s_expm1.c: Include <float.h>.
(__expm1): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/flt-32/s_expm1f.c: Include <float.h>.
(__expm1f): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/dbl-64/wordsize-64/e_cosh.c (__ieee754_cosh):
Check for small arguments before calling __expm1.
* math/auto-libm-test-in: Do not mark underflow exceptions as
possibly missing for bug 16353.
* math/auto-libm-test-out: Regenerated.
In the x86 / x86_64 implementations of expm1l, when expm1l's result
should underflow to 0 (argument minus the least subnormal, in some
rounding modes), it can be a zero of the wrong sign. This patch fixes
this by returning the argument with underflow forced in that case
(this is a 1ulp error relative to the correctly rounded result of -0,
which is OK in terms of the documented accuracy goals, whereas a
result with the wrong sign never is).
Tested for x86_64 and x86.
[BZ #18569]
* sysdeps/i386/fpu/e_expl.S (IEEE754_EXPL) [USE_AS_EXPM1L]: Force
underflow and return argument in case of subnormal argument.
* sysdeps/x86_64/fpu/e_expl.S (IEEE754_EXPL) [USE_AS_EXPM1L]:
Likewise.
* math/auto-libm-test-in: Add more tests of expm1.
* math/auto-libm-test-out: Regenerated.
Similar to various other bugs in this area, the x86 and x86_64
implementations of expl / exp10l can fail to produce underflow
exceptions when the unscaled result has trailing 0 bits so the scaling
down to subnormal precision is exact. This patch fixes this by
forcing the exception in the case of tiny results.
Tested for x86_64 and x86.
[BZ #16361]
* sysdeps/i386/fpu/e_expl.S [!USE_AS_EXPM1L] (cmin): New object.
[!USE_AS_EXPM1L] (IEEE754_EXPL): Force underflow exception for
tiny results.
* sysdeps/x86_64/fpu/e_expl.S [!USE_AS_EXPM1L] (cmin): New object.
[!USE_AS_EXPM1L] (IEEE754_EXPL): Force underflow exception for
tiny results.
* math/auto-libm-test-in: Add more tests of exp and exp10. Do not
mark underflow exceptions as possibly missing for bug 16361.
* math/auto-libm-test-out: Regenerated.
Similar to various other bugs in this area, some asinh implementations
do not raise the underflow exception for subnormal arguments, when the
result is tiny and inexact. This patch forces the exception in a
similar way to previous fixes.
Tested for x86_64, x86 and mips64.
[BZ #16350]
* sysdeps/i386/fpu/s_asinh.S (__asinh): Force underflow exception
for arguments with small absolute value.
* sysdeps/i386/fpu/s_asinhf.S (__asinhf): Likewise.
* sysdeps/i386/fpu/s_asinhl.S (__asinhl): Likewise.
* sysdeps/ieee754/dbl-64/s_asinh.c: Include <float.h>.
(__asinh): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/flt-32/s_asinhf.c: Include <float.h>.
(__asinhf): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/ldbl-128/s_asinhl.c: Include <float.h>.
(__asinhl): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/ldbl-128ibm/s_asinhl.c: Include <float.h>.
(__asinhl): Force underflow exception for arguments with small
absolute value.
* sysdeps/ieee754/ldbl-96/s_asinhl.c: Include <float.h>.
(__asinhl): Force underflow exception for arguments with small
absolute value.
* math/auto-libm-test-in: Do not mark underflow exceptions as
possibly missing for bug 16350.
* math/auto-libm-test-out: Regenerated.
I noticed that I'd left a spurious-underflow allowance behind in
auto-libm-test-in for a bug that was fixed some time ago. This patch
removes it.
Tested for x86_64 and x86.
* math/auto-libm-test-in: Remove spurious underflow allowance for
tests of cexp.
* math/auto-libm-test-out: Regenerated.
sysdeps/ieee754/ldbl-128ibm has its own versions of cprojl, ctanhl and
ctanl.
Having its own versions, where otherwise the math/ copies are
generally used for all floating-point formats, means they are liable
to get out of sync and not benefit from bug fixes to the generic
versions. The substantive differences (not arising from getting out
of sync and slightly different fixes for the same issues) are: long
double compat handling (also done in the ldbl-opt versions, so doesn't
require special versions for ldbl-128ibm); handling of LDBL_EPSILON
(conditionally undefined and redefined in other math/ implementations,
so doesn't justify a special version), and:
/* __gcc_qmul does not respect -0.0 so we need the following fixup. */
if ((__real__ res == 0.0L) && (__real__ x == 0.0L))
__real__ res = __real__ x;
if ((__real__ res == 0.0L) && (__imag__ x == 0.0L))
__imag__ res = __imag__ x;
But if that statement about __gcc_qmul was ever true for an old
version of that libgcc function, it's not the case for any GCC version
now supported to build glibc; there's explicit logic early in that
function (and similarly in __gcc_qdiv) to return an appropriately
signed zero if the product of the high parts is zero. So this patch
adds the special LDBL_EPSILON handling to the generic functions and
removes the ldbl-128ibm versions.
Tested for powerpc32 (compared test-ldouble.out before and after the
changes; there are slight changes to results for ctanl / ctanhl,
arising from divergence of the implementations, but nothing that
affects the overall nature of the issues shown by the testsuite, and
in particular nothing related to signs of zero resutls).
* math/s_ctanhl.c [LDBL_MANT_DIG == 106] (LDBL_EPSILON): Undefine
and redefine.
* math/s_ctanl.c [LDBL_MANT_DIG == 106] (LDBL_EPSILON): Undefine
and redefine.
* sysdeps/ieee754/ldbl-128ibm/s_cprojl.c: Remove file.
* sysdeps/ieee754/ldbl-128ibm/s_ctanhl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_ctanl.c: Likewise.
Here is implementation of vectorized sin containing SSE, AVX,
AVX2 and AVX512 versions according to Vector ABI
<https://groups.google.com/forum/#!topic/x86-64-abi/LmppCfN1rZ4>.
* bits/libm-simd-decl-stubs.h: Added stubs for sin.
* math/bits/mathcalls.h: Added sin declaration with __MATHCALL_VEC.
* sysdeps/unix/sysv/linux/x86_64/libmvec.abilist: New versions added.
* sysdeps/x86/fpu/bits/math-vector.h: SIMD declaration for sin.
* sysdeps/x86_64/fpu/Makefile (libmvec-support): Added new files.
* sysdeps/x86_64/fpu/Versions: New versions added.
* sysdeps/x86_64/fpu/libm-test-ulps: Regenerated.
* sysdeps/x86_64/fpu/multiarch/Makefile (libmvec-sysdep_routines): Added
build of SSE, AVX2 and AVX512 IFUNC versions.
* sysdeps/x86_64/fpu/multiarch/svml_d_sin2_core.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_sin2_core_sse4.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_sin4_core.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_sin4_core_avx2.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_sin8_core.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_sin8_core_avx512.S: New file.
* sysdeps/x86_64/fpu/svml_d_sin2_core.S: New file.
* sysdeps/x86_64/fpu/svml_d_sin4_core.S: New file.
* sysdeps/x86_64/fpu/svml_d_sin4_core_avx.S: New file.
* sysdeps/x86_64/fpu/svml_d_sin8_core.S: New file.
* sysdeps/x86_64/fpu/svml_d_sin_data.S: New file.
* sysdeps/x86_64/fpu/svml_d_sin_data.h: New file.
* sysdeps/x86_64/fpu/test-double-vlen2-wrappers.c: Added vector sin test.
* sysdeps/x86_64/fpu/test-double-vlen2.c: Likewise.
* sysdeps/x86_64/fpu/test-double-vlen4-avx2-wrappers.c: Likewise.
* sysdeps/x86_64/fpu/test-double-vlen4-avx2.c: Likewise.
* sysdeps/x86_64/fpu/test-double-vlen4-wrappers.c: Likewise.
* sysdeps/x86_64/fpu/test-double-vlen4.c: Likewise.
* sysdeps/x86_64/fpu/test-double-vlen8-wrappers.c: Likewise.
* sysdeps/x86_64/fpu/test-double-vlen8.c: Likewise.
* NEWS: Mention addition of x86_64 vector sin.
* math/Makefile: Added CFLAGS for new tests.
* math/test-float-vlen16.h: New file.
* math/test-float-vlen4.h: New file.
* math/test-float-vlen8.h: New file.
* math/test-double-vlen2.h: Fixed 2 argument macro and comment.
* sysdeps/x86_64/fpu/Makefile: Added new tests and variables.
* sysdeps/x86_64/fpu/libm-test-ulps: Regenerated.
* sysdeps/x86_64/fpu/test-float-vlen16-wrappers.c: New file.
* sysdeps/x86_64/fpu/test-float-vlen16.c: New file.
* sysdeps/x86_64/fpu/test-float-vlen4-wrappers.c: New file.
* sysdeps/x86_64/fpu/test-float-vlen4.c: New file.
* sysdeps/x86_64/fpu/test-float-vlen8-avx2-wrappers.c: New file.
* sysdeps/x86_64/fpu/test-float-vlen8-avx2.c: New file.
* sysdeps/x86_64/fpu/test-float-vlen8-wrappers.c: New file.
* sysdeps/x86_64/fpu/test-float-vlen8.c: New file.
We test vector math functions using scalar tests infrastructure with
help of special wrappers from scalar versions to vector ones. Wrapper
implemented using platform specific vector types and placed in separate
file for compilation with architecture specific options, main part of
test has no such options. With help of system of definitions unfolding
of which is drived from test code we have wrapper called in individual
testing function instead of scalar function. Also system of definitions
includes generated during make check header math/libm-have-vector-test.h
with series of conditional definitions which help to avoid build fails
for functions having no vector versions; runtime architecture check
to prevent runtime fails of test run on inappropriate hardware.
* math/Makefile: Added rules for vector tests.
* math/gen-libm-have-vector-test.sh: Added generation of wrapper
declaration under condition.
* math/test-double-vlen2.h: New file.
* math/test-double-vlen4.h: New file.
* math/test-double-vlen8.h: New file.
* math/test-vec-loop.h: Added initialization macro.
* sysdeps/x86_64/fpu/Makefile: Added variables for vector tests.
* sysdeps/x86_64/fpu/libm-test-ulps: Regenarated.
* sysdeps/x86_64/fpu/math-tests-arch.h: New file.
* sysdeps/x86_64/fpu/test-double-vlen2-wrappers.c: New file.
* sysdeps/x86_64/fpu/test-double-vlen2.c: New file.
* sysdeps/x86_64/fpu/test-double-vlen4-avx2-wrappers.c: New file.
* sysdeps/x86_64/fpu/test-double-vlen4-avx2.c: New file.
* sysdeps/x86_64/fpu/test-double-vlen4-wrappers.c: New file.
* sysdeps/x86_64/fpu/test-double-vlen4.c: New file.
* sysdeps/x86_64/fpu/test-double-vlen8-wrappers.c: New file.
* sysdeps/x86_64/fpu/test-double-vlen8.c: New file.
Here is implementation of cos containing SSE, AVX, AVX2 and AVX512
versions according to Vector ABI which had been discussed in
<https://groups.google.com/forum/#!topic/x86-64-abi/LmppCfN1rZ4>.
Vector math library build and ABI testing enabled by default for x86_64.
* sysdeps/x86_64/fpu/Makefile: New file.
* sysdeps/x86_64/fpu/Versions: New file.
* sysdeps/x86_64/fpu/svml_d_cos_data.S: New file.
* sysdeps/x86_64/fpu/svml_d_cos_data.h: New file.
* sysdeps/x86_64/fpu/svml_d_cos2_core.S: New file.
* sysdeps/x86_64/fpu/svml_d_cos4_core.S: New file.
* sysdeps/x86_64/fpu/svml_d_cos4_core_avx.S: New file.
* sysdeps/x86_64/fpu/svml_d_cos8_core.S: New file.
* sysdeps/x86_64/fpu/svml_d_wrapper_impl.h: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_cos2_core.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_cos2_core_sse4.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_cos4_core.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_cos4_core_avx2.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_cos8_core.S: New file.
* sysdeps/x86_64/fpu/multiarch/svml_d_cos8_core_avx512.S: New file.
* sysdeps/x86_64/fpu/multiarch/Makefile (libmvec-sysdep_routines): Added
build of SSE, AVX2 and AVX512 IFUNC versions.
* sysdeps/x86/fpu/bits/math-vector.h: Added SIMD declaration for cos.
* math/bits/mathcalls.h: Added cos declaration with __MATHCALL_VEC.
* sysdeps/x86_64/configure.ac: Options for libmvec build.
* sysdeps/x86_64/configure: Regenerated.
* sysdeps/x86_64/sysdep.h (cfi_offset_rel_rsp): New macro.
* sysdeps/unix/sysv/linux/x86_64/libmvec.abilist: New file.
* manual/install.texi (Configuring and compiling): Document
--disable-mathvec.
* INSTALL: Regenerated.
* NEWS: Mention addition of libmvec and x86_64 vector cos.
ldbl-96 remquol wrongly handles the case where the first argument is
finite and the second infinite, because the check for the second
argument being a NaN fails to disregard the explicit high mantissa bit
and so wrongly interprets an infinity as being a NaN. This patch
fixes this by masking off that bit, and improves test coverage for
both remainder and remquo (various cases were missing tests, or, as in
the case of the bug, were tested only for one of the two functions).
Tested for x86_64 and x86.
[BZ #18244]
* sysdeps/ieee754/ldbl-96/s_remquol.c (__remquol): Ignore explicit
high mantissa bit when testing whether P is a NaN.
* math/libm-test.inc (remainder_test_data): Add more tests.
(remquo_test_data): Likewise.
The i386 implementation of atanhl, for small arguments, does a
calculation that involves computing twice the square of the argument,
resulting in spurious underflows for some arguments. This patch fixes
this by just returning the argument when its exponent is below -32,
with underflow being forced as needed for subnormal arguments.
Tested for x86 and x86_64.
[BZ #18049]
* sysdeps/i386/fpu/e_atanhl.S (__ieee754_atanhl): For exponents
below -32, return the argument, with underflow if subnormal.
* math/auto-libm-test-in: Add more tests of atanh.
* math/auto-libm-test-out: Regenerated.
Similar to various other bugs in this area, some atanh implementations
do not raise the underflow exception for subnormal arguments, when the
result is tiny and inexact. This patch forces the exception in a
similar way to previous fixes. (No change in this regard is needed
for the i386 implementation; special handling to force underflows in
these cases will only be needed there when the spurious underflows,
bug 18049, get fixed.)
Tested for x86_64, x86, powerpc and mips64.
[BZ #16352]
* sysdeps/i386/fpu/e_atanh.S (dbl_min): New object.
(__ieee754_atanh): Force underflow exception for results with
small absolute value.
* sysdeps/i386/fpu/e_atanhf.S (flt_min): New object.
(__ieee754_atanhf): Force underflow exception for results with
small absolute value.
* sysdeps/ieee754/dbl-64/e_atanh.c: Include <float.h>.
(__ieee754_atanh): Force underflow exception for results with
small absolute value.
* sysdeps/ieee754/flt-32/e_atanhf.c: Include <float.h>.
(__ieee754_atanhf): Force underflow exception for results with
small absolute value.
* sysdeps/ieee754/ldbl-128/e_atanhl.c: Include <float.h>.
(__ieee754_atanhl): Force underflow exception for results with
small absolute value.
* sysdeps/ieee754/ldbl-128ibm/e_atanhl.c: Include <float.h>.
(__ieee754_atanhl): Force underflow exception for results with
small absolute value.
* sysdeps/ieee754/ldbl-96/e_atanhl.c: Include <float.h>.
(__ieee754_atanhl): Force underflow exception for results with
small absolute value.
* math/auto-libm-test-in: Do not allow missing underflow
exceptions from atanh.
* math/auto-libm-test-out: Regenerated.
The flt-32 implementation of tanf produces spurious underflow
exceptions for some small arguments, through computing values on the
order of x^5. This patch fixes this by adjusting the threshold for
returning x (or, as applicable, +/- 1/x) to 2**-13 (the next term in
the power series being x^3/3).
Tested for x86_64 and x86.
[BZ #18221]
* sysdeps/ieee754/flt-32/k_tanf.c (__kernel_tanf): Use 2**-13 not
2**-28 as threshold for returning x or +/- 1/x.
* math/auto-libm-test-in: Add more tests of tan.
* math/auto-libm-test-out: Regenerated.
The flt-32 implementation of lgammaf produces spurious underflow
exceptions for some large arguments, because of calculations involving
x^-2 multiplied by small constants. This patch fixes this by
adjusting the threshold for a simpler computation to 2**26 (the error
in the simpler computation is on the order of 0.5 * log (x), for a
result on the order of x * log (x)).
Tested for x86_64 and x86.
[BZ #18220]
* sysdeps/ieee754/flt-32/e_lgammaf_r.c (__ieee754_lgammaf_r): Use
2**26 not 2**58 as threshold for returning x * (log (x) - 1).
* math/auto-libm-test-in: Add another test of lgamma.
* math/auto-libm-test-out: Regenerated.
The flt-32 implementation of erfcf produces spurious underflow
exceptions for some arguments close to 0, because of calculations
squaring the argument and then multiplying by small constants. This
patch fixes this by adjusting the threshold for arguments for which
the result is so close to 1 that 1 - x will give the right result from
2**-56 to 2**-26. (If 1 - x * 2/sqrt(pi) were used, the errors would be
on the order of x^3 and a much larger threshold could be used.)
Tested for x86_64 and x86.
[BZ #18217]
* sysdeps/ieee754/flt-32/s_erff.c (__erfcf): Use 2**-26 not 2**-56
as threshold for returning 1 - x.
* math/auto-libm-test-in: Add more tests of erfc.
* math/auto-libm-test-out: Regenerated.
The sysdeps/ieee754/flt-32 version of atanf produces spurious
underflow exceptions for some large arguments, because of computations
that compute x^-4. This patch fixes this by adjusting the threshold
for large arguments (for which +/- pi/2 can just be returned, the
correct result being roughly +/- pi/2 - 1/x) from 2^34 to 2^25.
Tested for x86_64 and x86.
[BZ #18196]
* sysdeps/ieee754/flt-32/s_atanf.c (__atanf): Use 2^25 not 2^34 as
threshold for large arguments.
* math/auto-libm-test-in: Add another test of atan.
* math/auto-libm-test-out: Regenerated.
Similar to various other bugs in this area, some log1p implementations
do not raise the underflow exception for subnormal arguments, when the
result is tiny and inexact. This patch forces the exception in a
similar way to previous fixes. (The ldbl-128ibm implementation
doesn't currently need any change as it already generates this
exception, albeit through code that would generate spurious exceptions
in other cases; special code for this issue will only be needed there
when fixing the spurious exceptions.)
Tested for x86_64, x86, powerpc and mips64.
[BZ #16339]
* sysdeps/i386/fpu/s_log1p.S (dbl_min): New object.
(__log1p): Force underflow exception for results with small
absolute value.
* sysdeps/i386/fpu/s_log1pf.S (flt_min): New object.
(__log1pf): Force underflow exception for results with small
absolute value.
* sysdeps/ieee754/dbl-64/s_log1p.c: Include <float.h>.
(__log1p): Force underflow exception for results with small
absolute value.
* sysdeps/ieee754/flt-32/s_log1pf.c: Include <float.h>.
(__log1pf): Force underflow exception for results with small
absolute value.
* sysdeps/ieee754/ldbl-128/s_log1pl.c: Include <float.h>.
(__log1pl): Force underflow exception for results with small
absolute value.
* math/auto-libm-test-in: Do not allow missing underflow
exceptions from log1p.
* math/auto-libm-test-out: Regenerated.
Installation of libm.so as linker script only in case of libmvec.so build.
2015-05-14 Andrew Senkevich <andrew.n.senkevich@gmail.com>
* Makeconfig (rpath-dirs, all-subdirs): Added mathvec folder.
(libmvec): New variable.
* configure.ac: Added option for mathvec build.
* configure: Regenerated.
* mathvec/Depend: New file.
* mathvec/Makefile: New file.
* shlib-versions: Added libmvec.
* math/Makefile: Added rule for libm.so installation.
declarations for math functions in math.h. Added new headers math-vector.h
(only generic version for now) and libm-simd-decl-stubs.h with empty
definitions required for proper unfolding of new macros __MATHCALL_VEC which
will be used for declaration of vector math functions.
2015-05-14 Andrew Senkevich <andrew.senkevich@intel.com>
* bits/math-vector.h: New file.
* bits/libm-simd-decl-stubs.h: New header.
* math/Makefile (headers): Added new header libm-simd-decl-stubs.h.
* math/math.h (__MATHCALL_VEC): New macro.
of method for separation which exactly testing function needed to run with
help of generated during make check header with series of conditional
definitions.
2015-05-14 Andrew Senkevich <andrew.senkevich@intel.com>
* math/gen-libm-have-vector-test.sh: Script generates series of macros
for conditions in testing functions.
* math/Makefile: Added call of libm-have-vector-test.sh.
* math/libm-test.inc (HAVE_VECTOR): New macros.
of vector math functions infrastructure and several x86_64 implementations.
This patch is preparatory change in libm-test.c - splitting of macros which
form name of tested functions for ability to use separate name for tested
functions and for functions used in test suite infrastructure.
2015-05-14 Andrew Senkevich <andrew.senkevich@intel.com>
* math/test-double.c (FUNC_TEST): New macro.
* math/test-float.c: Likewise.
* math/test-idouble.c: Likewise.
* math/test-ifloat.c: Likewise.
* math/test-ildoubl.c: Likewise.
* math/test-ldouble.c: Likewise.
* math/libm-test.inc: Use FUNC_TEST for name of tested functions.
This patch adds more randomly-generated tests of various libm
functions that are observed to increase ulps on x86_64.
Tested for x86_64 and x86 and ulps updated accordingly.
* math/auto-libm-test-in: Add more tests of csqrt, lgamma, log10
and sinh.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch adds more randomly-generated tests of various libm
functions that are observed to increase ulps on x86_64.
Tested for x86_64 and x86 and ulps updated accordingly.
* math/auto-libm-test-in: Add more tests of acosh, atanh, cos,
csqrt, erfc, sin and sincos.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch adds more randomly-generated tests of various libm
functions that are observed to increase ulps on x86_64. (This process
must eventually converge, when my random test generation stops finding
inputs that increase the listed ulps, except maybe for any cases
uncovered where the errors exceed the maximum allowed 9ulp error and
so indicate actual libm bugs needing fixing.)
Tested for x86_64 and x86 and ulps updated accordingly.
* math/auto-libm-test-in: Add more tests of acosh, atanh, clog,
clog10, csqrt, erfc, exp2, expm1, log10, log2 and sinh.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch adds more randomly-generated tests of various libm
functions that are observed to increase ulps on x86_64.
Tested for x86_64 and x86 and ulps updated accordingly.
* math/auto-libm-test-in: Add more tests of atan, clog, clog10,
cos, csqrt, erf, erfc, exp2, lgamma, log1p, sin, sincos, tanh and
tgamma.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
