For each input readelf output, localplt.awk parses each 'Relocation
section' entry, checks its offset against the dynamic section entry, and
saves each DT_JMPREL, DT_RELA, and DT_REL offset value it finds. After
all lines are read, the script checks if any segment offset differed
from 0, meaning at least one 'Relocation section' was matched.
However, if the shared object was built with RELR support and the static
linker could place all the relocation on DT_RELR, there would be no
DT_JMPREL, DT_RELA, and DT_REL entries; only a DT_RELR.
For the current three ABIs that support (aarch64, x86, and powerpc64),
the powerpc64 ld.so shows the behavior above. Both x86_64 and aarch64
show extra relocations on '.rela.dyn', which makes the script check to
succeed.
This patch fixes by handling DT_RELR, where the offset is checked
against the dynamic section entries and if the shared object contains an
entry it means that there are no extra PLT entries (since all
relocations are relative).
It fixes the elf/check-localplt failure on powerpc.
Checked with a build/check for aarch64-linux-gnu, x86_64-linux-gnu,
i686-linux-gnu, arm-linux-gnueabihf, s390x-linux-gnu, powerpc-linux-gnu,
powerpc64-linux-gnu, and powerpc64le-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 4f047d9ede)
The __rseq_size value is now the active area of struct rseq
(so 20 initially), not the full struct size including padding
at the end (32 initially).
Update misc/tst-rseq to print some additional diagnostics.
Reviewed-by: Michael Jeanson <mjeanson@efficios.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
(cherry picked from commit 2e456ccf0c)
While working on a patch to add support for the extensible rseq ABI, we
came across an issue where a new 'const' variable would be merged with
the existing '__rseq_size' variable. We tracked this to the use of
'-fmerge-all-constants' which allows the compiler to merge identical
constant variables. This means that all 'const' variables in a compile
unit that are of the same size and are initialized to the same value can
be merged.
In this specific case, on 32 bit systems 'unsigned int' and 'ptrdiff_t'
are both 4 bytes and initialized to 0 which should trigger the merge.
However for reasons we haven't delved into when the attribute 'section
(".data.rel.ro")' is added to the mix, only variables of the same exact
types are merged. As far as we know this behavior is not specified
anywhere and could change with a new compiler version, hence this patch.
Move the definitions of these variables into an assembler file and add
hidden writable aliases for internal use. This has the added bonus of
removing the asm workaround to set the values on rseq registration.
Tested on Debian 12 with GCC 12.2.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit 2b92982e23)
The z13/vector-optimized wcsncmp implementation segfaults if n=1
and there is only one character (equal on both strings) before
the page end. Then it loads and compares one character and misses
to check n again. The following load fails.
This patch removes the extra load and compare of the first character
and just start with the loop which uses vector-load-to-block-boundary.
This code-path also checks n.
With this patch both tests are passing:
- the simplified one mentioned in the bugzilla 31934
- the full one in Florian Weimer's patch:
"manual: Document a GNU extension for strncmp/wcsncmp"
(https://patchwork.sourceware.org/project/glibc/patch/874j9eml6y.fsf@oldenburg.str.redhat.com/):
On s390x-linux-gnu (z16), the new wcsncmp test fails due to bug 31934.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 9b76514103)
The __getrandom_nocancel used by __arc4random_buf uses
INLINE_SYSCALL_CALL (which returns -1/errno) and the loop checks for
the return value instead of errno to fallback to /dev/urandom.
The malloc code now uses __getrandom_nocancel_nostatus, which uses
INTERNAL_SYSCALL_CALL, so there is no need to use the variant that does
not set errno (BZ#29624).
Checked on x86_64-linux-gnu.
Reviewed-by: Xi Ruoyao <xry111@xry111.site>
(cherry picked from commit 184b9e530e)
The libc.a for alpha, s390, and sparcv9 does not provide
copysignf64x, copysignf128, frexpf64x, frexpf128, modff64x, and
modff128.
Checked with a static build for the affected ABIs.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit eaa8113bf0)
Some static implementation of float128 routines might call __isnanf128,
which is not provided by the static object.
Checked on x86_64-linux-gnu.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit 5d4999e519)
The commit 08ddd26814 removed the static exp10 on i386 and m68k with an
empty w_exp10.c (required for the ABIs that uses the newly
implementation). This patch fixes by adding the required symbols on the
arch-specific w_exp{f}_compat.c implementation.
Checked on i686-linux-gnu and with a build for m68k-linux-gnu.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
(cherry picked from commit 1f09aae36a)
The commit 16439f419b removed the static fmod/fmodf on i386 and m68k
with and empty w_fmod.c (required for the ABIs that uses the newly
implementation). This patch fixes by adding the required symbols on
the arch-specific w_fmod{f}_compat.c implementation.
To statically build fmod fails on some ABI (alpha, s390, sparc) because
it does not export the ldexpf128, this is also fixed by this patch.
Checked on i686-linux-gnu and with a build for m68k-linux-gnu.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
(cherry picked from commit 0b716305df)
If the pidfd_spawn/pidfd_spawnp helper process succeeds, but evecve
fails for some reason (either with an invalid/non-existent, memory
allocation, etc.) the resulting pidfd is never closed, nor returned
to caller (so it can call close).
Since the process creation failed, it should be up to posix_spawn to
also, close the file descriptor in this case (similar to what it
does to reap the process).
This patch also changes the waitpid with waitid (P_PIDFD) for pidfd
case, to avoid a possible pid re-use.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit c90cfce849)
The _dl_sysdep_parse_arguments function contains initalization
of a large on-stack variable:
dl_parse_auxv_t auxv_values = { 0, };
This uses a non-inline version of memset on powerpc64le-linux-gnu,
so it must use the baseline memset.
(cherry picked from commit f6ea5d1291)
Properly set libc_cv_have_x86_isa_level in shell for MINIMUM_X86_ISA_LEVEL
defined as
(__X86_ISA_V1 + __X86_ISA_V2 + __X86_ISA_V3 + __X86_ISA_V4)
Also set __X86_ISA_V2 to 1 for i386 if __GCC_HAVE_SYNC_COMPARE_AND_SWAP_8
is defined. There are no changes in config.h nor in config.make on x86-64.
On i386, -march=x86-64-v2 with GCC generates
#define MINIMUM_X86_ISA_LEVEL 2
in config.h and
have-x86-isa-level = 2
in config.make. This fixes BZ #31883.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
(cherry picked from commit 29807a271e)
On i386, set the default minimum ISA level to 0, not 1 (baseline which
includes SSE2). There are no changes in config.h nor in config.make on
x86-64. This fixes BZ #31867.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Tested-by: Ian Jordan <immoloism@gmail.com>
Reviewed-by: Sam James <sam@gentoo.org>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit 09bc68b0ac)
The test aims to ensure that malloc uses the alternate path to
allocate memory when sbrk() or brk() fails.To achieve this,
the test first creates an obstruction at current program break,
tests that obstruction with a failing sbrk(), then checks if malloc
is still returning a valid ptr thus inferring that malloc() used
mmap() instead of brk() or sbrk() to allocate the memory.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
Reviewed-by: Zack Weinberg <zack@owlfolio.org>
(cherry picked from commit 127fc56152)
Add a DSO (malloc/tst-aligned_alloc-lib.so) that can be used during
testing to interpose malloc with a call that randomly uses either
aligned_alloc, __libc_malloc, or __libc_calloc in the place of malloc.
Use LD_PRELOAD with the DSO to mirror malloc/tst-malloc.c testing as an
example in malloc/tst-malloc-random.c. Add malloc/tst-aligned-alloc-random.c
as another example that does a number of malloc calls with randomly sized,
but limited to 0xffff, requests.
The intention is to be able to utilize existing malloc testing to ensure
that similar allocation APIs are also exposed to the same rigors.
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit 3395157ff2)
Put each test on a separate line and sort tests.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit d49cd6a191)
Some shadow stack test scripts use the '==' operator with the 'test'
command to validate exit codes resulting in the following error:
sysdeps/x86_64/tst-shstk-legacy-1e.sh: 31: test: 139: unexpected operator
The '==' operator is invalid for the 'test' command, use '-eq' like the
previous call to 'test'.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit 155bb9d036)
This has been confirmed to work around some interposed mallocs. Here
is a discussion of the impact test ust/libc-wrapper/test_libc-wrapper
in lttng-tools:
New TLS usage in libgcc_s.so.1, compatibility impact
<https://inbox.sourceware.org/libc-alpha/8734v1ieke.fsf@oldenburg.str.redhat.com/>
Reportedly, this patch also papers over a similar issue when tcmalloc
2.9.1 is not compiled with -ftls-model=initial-exec. Of course the
goal really should be to compile mallocs with the initial-exec TLS
model, but this commit appears to be a useful interim workaround.
Fixes commit d2123d6827 ("elf: Fix slow
tls access after dlopen [BZ #19924]").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit afe42e935b)
In Linux 6.9 a new flag is added to allow for Per-io operations to
disable append mode even if a file was opened with the flag O_APPEND.
This is done with the new RWF_NOAPPEND flag.
This caused two test failures as these tests expected the flag 0x00000020
to be unused. Adding the flag definition now fixes these tests on Linux
6.9 (v6.9-rc1).
FAIL: misc/tst-preadvwritev2
FAIL: misc/tst-preadvwritev64v2
This patch adds the flag, adjusts the test and adds details to
documentation.
Link: https://lore.kernel.org/all/20200831153207.GO3265@brightrain.aerifal.cx/
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 3db9d208dd)
The a4ed0471d7 removed the generic version which is included by
features.h and used by Hurd.
Checked by building i686-gnu and x86_64-gnu with build-many-glibc.py.
(cherry picked from commit c27f8763cf)
It was raised on libc-help [1] that some Linux kernel interfaces expect
the libc to define __USE_TIME_BITS64 to indicate the time_t size for the
kABI. Different than defined by the initial y2038 design document [2],
the __USE_TIME_BITS64 is only defined for ABIs that support more than
one time_t size (by defining the _TIME_BITS for each module).
The 64 bit time_t redirects are now enabled using a different internal
define (__USE_TIME64_REDIRECTS). There is no expected change in semantic
or code generation.
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu, and
arm-linux-gnueabi
[1] https://sourceware.org/pipermail/libc-help/2024-January/006557.html
[2] https://sourceware.org/glibc/wiki/Y2038ProofnessDesign
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit a4ed0471d7)
This supports common coding patterns. The GCC C front end before
version 7 rejects the may_alias attribute on a struct definition
if it was not present in a previous forward declaration, so this
attribute can only be conditionally applied.
This implements the spirit of the change in Austin Group issue 1641.
Suggested-by: Marek Polacek <polacek@redhat.com>
Suggested-by: Jakub Jelinek <jakub@redhat.com>
Reviewed-by: Sam James <sam@gentoo.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 8d7b6b4cb2)
pidfd_getpid.c has
/* Ignore invalid large values. */
if (INT_MULTIPLY_WRAPV (10, n, &n)
|| INT_ADD_WRAPV (n, *l++ - '0', &n))
return -1;
For GCC older than GCC 7, INT_ADD_WRAPV(a, b, r) is defined as
_GL_INT_OP_WRAPV (a, b, r, +, _GL_INT_ADD_RANGE_OVERFLOW)
and *l++ - '0' is evaluated twice. Fix BZ #31798 by moving "l++" out of
the if statement. Tested with GCC 6.4 and GCC 14.1.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit f981bf6b9d)
This commit adds a simple bind/accept/connect test for an IPv4 TCP
connection to a local process via the loopback interface.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
(cherry picked from commit 3a83f79024)
This code expects the WCSCAT preprocessor macro to be predefined in case
the evex implementation of the function should be defined with a name
different from __wcsncat_evex. However, when glibc is built for
x86-64-v4 without multiarch support, sysdeps/x86_64/wcsncat.S defines
WCSNCAT variable instead of WCSCAT to build it as wcsncat. Rename the
variable to WCSNCAT, as it is actually a better naming choice for the
variable in this case.
Reported-by: Kenton Groombridge
Link: https://bugs.gentoo.org/921945
Fixes: 64b8b6516b ("x86: Add evex optimized functions for the wchar_t strcpy family")
Signed-off-by: Gabi Falk <gabifalk@gmx.com>
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
(cherry picked from commit dd5f891c1a)
On Fedora 40/x86-64, linker enables --enable-new-dtags by default which
generates DT_RUNPATH instead of DT_RPATH. Unlike DT_RPATH, DT_RUNPATH
only applies to DT_NEEDED entries in the executable and doesn't applies
to DT_NEEDED entries in shared libraries which are loaded via DT_NEEDED
entries in the executable. Some glibc tests have libstdc++.so.6 in
DT_NEEDED, which has libm.so.6 in DT_NEEDED. When DT_RUNPATH is generated,
/lib64/libm.so.6 is loaded for such tests. If the newly built glibc is
older than glibc 2.36, these tests fail with
assert/tst-assert-c++: /export/build/gnu/tools-build/glibc-gitlab-release/build-x86_64-linux/libc.so.6: version `GLIBC_2.36' not found (required by /lib64/libm.so.6)
assert/tst-assert-c++: /export/build/gnu/tools-build/glibc-gitlab-release/build-x86_64-linux/libc.so.6: version `GLIBC_ABI_DT_RELR' not found (required by /lib64/libm.so.6)
Pass -Wl,--disable-new-dtags to linker when building glibc tests with
--enable-hardcoded-path-in-tests. This fixes BZ #31719.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit 2dcaf70643)
The 680c597e9c commit made loader reject ill-formatted strings by
first tracking all set tunables and then applying them. However, it does
not take into consideration if the same tunable is set multiple times,
where parse_tunables_string appends the found tunable without checking
if it was already in the list. It leads to a stack-based buffer overflow
if the tunable is specified more than the total number of tunables. For
instance:
GLIBC_TUNABLES=glibc.malloc.check=2:... (repeat over the number of
total support for different tunable).
Instead, use the index of the tunable list to get the expected tunable
entry. Since now the initial list is zero-initialized, the compiler
might emit an extra memset and this requires some minor adjustment
on some ports.
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
Reported-by: Yuto Maeda <maeda@cyberdefense.jp>
Reported-by: Yutaro Shimizu <shimizu@cyberdefense.jp>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
(cherry picked from commit bcae44ea85)
This change follows two previous fixes addressing multiple definitions
of __memcpy_chk and __mempcpy_chk functions on i586, and __memmove_chk
and __memset_chk functions on i686. The test is intended to prevent
such issues from occurring in the future.
Signed-off-by: Gabi Falk <gabifalk@gmx.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Dmitry V. Levin <ldv@altlinux.org>
(cherry picked from commit ded2e0753e)
Commit c73c96a4a1 updated memcpy.S and
mempcpy.S, but omitted memmove.S and memset.S. As a result, the static
library built as PIC, whether with or without multiarch support,
contains two definitions for each of the __memmove_chk and __memset_chk
symbols.
/usr/lib/gcc/i686-pc-linux-gnu/14/../../../../i686-pc-linux-gnu/bin/ld: /usr/lib/gcc/i686-pc-linux-gnu/14/../../../../lib/libc.a(memset-ia32.o): in function `__memset_chk':
/var/tmp/portage/sys-libs/glibc-2.39-r3/work/glibc-2.39/string/../sysdeps/i386/i686/memset.S:32: multiple definition of `__memset_chk'; /usr/lib/gcc/i686-pc-linux-gnu/14/../../../../lib/libc.a(memset_chk.o):/var/tmp/portage/sys-libs/glibc-2.39-r3/work/glibc-2.39/debug/../sysdeps/i386/i686/multiarch/memset_chk.c:24: first defined here
After this change, regardless of PIC options, the static library, built
for i686 with multiarch contains implementations of these functions
respectively from debug/memmove_chk.c and debug/memset_chk.c, and
without multiarch contains implementations of these functions
respectively from sysdeps/i386/memmove_chk.S and
sysdeps/i386/memset_chk.S. This ensures that memmove and memset won't
pull in __chk_fail and the routines it calls.
Reported-by: Sam James <sam@gentoo.org>
Tested-by: Sam James <sam@gentoo.org>
Fixes: c73c96a4a1 ("i686: Fix build with --disable-multiarch")
Signed-off-by: Gabi Falk <gabifalk@gmx.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Dmitry V. Levin <ldv@altlinux.org>
(cherry picked from commit 5a2cf833f5)
/home/bmg/install/compilers/x86_64-linux-gnu/lib/gcc/x86_64-glibc-linux-gnu/13.2.1/../../../../x86_64-glibc-linux-gnu/bin/ld: /home/bmg/build/glibcs/i586-linux-gnu/glibc/libc.a(memcpy_chk.o): in function `__memcpy_chk':
/home/bmg/src/glibc/debug/../sysdeps/i386/memcpy_chk.S:29: multiple definition of `__memcpy_chk';/home/bmg/build/glibcs/i586-linux-gnu/glibc/libc.a(memcpy.o):/home/bmg/src/glibc/string/../sysdeps/i386/i586/memcpy.S:31: first defined here /home/bmg/install/compilers/x86_64-linux-gnu/lib/gcc/x86_64-glibc-linux-gnu/13.2.1/../../../../x86_64-glibc-linux-gnu/bin/ld: /home/bmg/build/glibcs/i586-linux-gnu/glibc/libc.a(mempcpy_chk.o): in function `__mempcpy_chk': /home/bmg/src/glibc/debug/../sysdeps/i386/mempcpy_chk.S:28: multiple definition of `__mempcpy_chk'; /home/bmg/build/glibcs/i586-linux-gnu/glibc/libc.a(mempcpy.o):/home/bmg/src/glibc/string/../sysdeps/i386/i586/memcpy.S:31: first defined here
After this change, the static library built for i586, regardless of PIC
options, contains implementations of these functions respectively from
sysdeps/i386/memcpy_chk.S and sysdeps/i386/mempcpy_chk.S. This ensures
that memcpy and mempcpy won't pull in __chk_fail and the routines it
calls.
Reported-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Gabi Falk <gabifalk@gmx.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Dmitry V. Levin <ldv@altlinux.org>
(cherry picked from commit 0fdf4ba48c)
This reverts commit 3148714ab6.
I had the wrong cherry-pick reference (the commit content is right; it's
just referring to a base that isn't upstream), but let's revert and reapply
for clarity.
Signed-off-by: Sam James <sam@gentoo.org>
This reverts commit ad92c483a4.
I had the wrong cherry-pick reference (the commit content is right; it's
just referring to a base that isn't upstream), but let's revert and reapply
for clarity.
Signed-off-by: Sam James <sam@gentoo.org>
This reverts commit ff110b2591.
I had the wrong cherry-pick reference (the commit content is right; it's
just referring to a base that isn't upstream), but let's revert and reapply
for clarity.
Signed-off-by: Sam James <sam@gentoo.org>
This change follows two previous fixes addressing multiple definitions
of __memcpy_chk and __mempcpy_chk functions on i586, and __memmove_chk
and __memset_chk functions on i686. The test is intended to prevent
such issues from occurring in the future.
Signed-off-by: Gabi Falk <gabifalk@gmx.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Dmitry V. Levin <ldv@altlinux.org>
(cherry picked from commit ded2e0753e)
Commit c73c96a4a1 updated memcpy.S and
mempcpy.S, but omitted memmove.S and memset.S. As a result, the static
library built as PIC, whether with or without multiarch support,
contains two definitions for each of the __memmove_chk and __memset_chk
symbols.
/usr/lib/gcc/i686-pc-linux-gnu/14/../../../../i686-pc-linux-gnu/bin/ld: /usr/lib/gcc/i686-pc-linux-gnu/14/../../../../lib/libc.a(memset-ia32.o): in function `__memset_chk':
/var/tmp/portage/sys-libs/glibc-2.39-r3/work/glibc-2.39/string/../sysdeps/i386/i686/memset.S:32: multiple definition of `__memset_chk'; /usr/lib/gcc/i686-pc-linux-gnu/14/../../../../lib/libc.a(memset_chk.o):/var/tmp/portage/sys-libs/glibc-2.39-r3/work/glibc-2.39/debug/../sysdeps/i386/i686/multiarch/memset_chk.c:24: first defined here
After this change, regardless of PIC options, the static library, built
for i686 with multiarch contains implementations of these functions
respectively from debug/memmove_chk.c and debug/memset_chk.c, and
without multiarch contains implementations of these functions
respectively from sysdeps/i386/memmove_chk.S and
sysdeps/i386/memset_chk.S. This ensures that memmove and memset won't
pull in __chk_fail and the routines it calls.
Reported-by: Sam James <sam@gentoo.org>
Tested-by: Sam James <sam@gentoo.org>
Fixes: c73c96a4a1 ("i686: Fix build with --disable-multiarch")
Signed-off-by: Gabi Falk <gabifalk@gmx.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Dmitry V. Levin <ldv@altlinux.org>
(cherry picked from commit 5a2cf833f5)
/home/bmg/install/compilers/x86_64-linux-gnu/lib/gcc/x86_64-glibc-linux-gnu/13.2.1/../../../../x86_64-glibc-linux-gnu/bin/ld: /home/bmg/build/glibcs/i586-linux-gnu/glibc/libc.a(memcpy_chk.o): in function `__memcpy_chk':
/home/bmg/src/glibc/debug/../sysdeps/i386/memcpy_chk.S:29: multiple definition of `__memcpy_chk';/home/bmg/build/glibcs/i586-linux-gnu/glibc/libc.a(memcpy.o):/home/bmg/src/glibc/string/../sysdeps/i386/i586/memcpy.S:31: first defined here /home/bmg/install/compilers/x86_64-linux-gnu/lib/gcc/x86_64-glibc-linux-gnu/13.2.1/../../../../x86_64-glibc-linux-gnu/bin/ld: /home/bmg/build/glibcs/i586-linux-gnu/glibc/libc.a(mempcpy_chk.o): in function `__mempcpy_chk': /home/bmg/src/glibc/debug/../sysdeps/i386/mempcpy_chk.S:28: multiple definition of `__mempcpy_chk'; /home/bmg/build/glibcs/i586-linux-gnu/glibc/libc.a(mempcpy.o):/home/bmg/src/glibc/string/../sysdeps/i386/i586/memcpy.S:31: first defined here
After this change, the static library built for i586, regardless of PIC
options, contains implementations of these functions respectively from
sysdeps/i386/memcpy_chk.S and sysdeps/i386/mempcpy_chk.S. This ensures
that memcpy and mempcpy won't pull in __chk_fail and the routines it
calls.
Reported-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Gabi Falk <gabifalk@gmx.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Dmitry V. Levin <ldv@altlinux.org>
(cherry picked from commit 789894a2f554d4503ecb2f13b2b4e93e43414f33)
The FSF's Licensing and Compliance Lab noted a discrepancy in the
licensing of several files in the glibc package.
When timespect_get.c was impelemented the license did not include
the standard ", or (at your option) any later version." text.
Change the license in timespec_get.c and all copied files to match
the expected license.
This change was previously approved in principle by the FSF in
RT ticket #1316403. And a similar instance was fixed in
commit 46703efa02.
(cherry picked from commit 91695ee459)
Using int may give false results for future dates (timeouts after the
year 2028).
Fixes commit 04a21e050d64a1193a6daab872bca2528bda44b ("CVE-2024-33601,
CVE-2024-33602: nscd: netgroup: Use two buffers in addgetnetgrentX
(bug 31680)").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 4bbca1a446)
These structs describe file formats under /var/log, and should not
depend on the definition of _TIME_BITS. This is achieved by
defining __WORDSIZE_TIME64_COMPAT32 to 1 on 32-bit ports that
support 32-bit time_t values (where __time_t is 32 bits).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 9abdae94c7)
The default <utmp-size.h> is for ports with a 64-bit time_t.
Ports with a 32-bit time_t or with __WORDSIZE_TIME64_COMPAT32=1
need to override it.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 4d4da5aab9)
Also compile dl-misc.os with $(rtld-early-cflags) to avoid
Program received signal SIGILL, Illegal instruction.
0x00007ffff7fd36ea in _dl_strtoul (nptr=nptr@entry=0x7fffffffe2c9 "2",
endptr=endptr@entry=0x7fffffffd728) at dl-misc.c:156
156 bool positive = true;
(gdb) bt
#0 0x00007ffff7fd36ea in _dl_strtoul (nptr=nptr@entry=0x7fffffffe2c9 "2",
endptr=endptr@entry=0x7fffffffd728) at dl-misc.c:156
#1 0x00007ffff7fdb1a9 in tunable_initialize (
cur=cur@entry=0x7ffff7ffbc00 <tunable_list+2176>,
strval=strval@entry=0x7fffffffe2c9 "2", len=len@entry=1)
at dl-tunables.c:131
#2 0x00007ffff7fdb3a2 in parse_tunables (valstring=<optimized out>)
at dl-tunables.c:258
#3 0x00007ffff7fdb5d9 in __GI___tunables_init (envp=0x7fffffffdd58)
at dl-tunables.c:288
#4 0x00007ffff7fe44c3 in _dl_sysdep_start (
start_argptr=start_argptr@entry=0x7fffffffdcb0,
dl_main=dl_main@entry=0x7ffff7fe5f80 <dl_main>)
at ../sysdeps/unix/sysv/linux/dl-sysdep.c:110
#5 0x00007ffff7fe5cae in _dl_start_final (arg=0x7fffffffdcb0) at rtld.c:494
#6 _dl_start (arg=0x7fffffffdcb0) at rtld.c:581
#7 0x00007ffff7fe4b38 in _start ()
(gdb)
when setting GLIBC_TUNABLES in glibc compiled with APX.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit 049b7684c9)
