AuroraMiddleware/glibc
1
0
Fork 0
mirror of https://sourceware.org/git/glibc.git synced 2024-11-27 07:20:11 +00:00
Code Issues Packages Projects Releases Wiki Activity
32,288 Commits 334 Branches 1,646 Tags 278 MiB
ffa448041b
Commit Graph

405 Commits

Author SHA1 Message Date
Joseph Myers
5a80d39d0d Obsolete pow10 functions. 
This patch obsoletes the pow10, pow10f and pow10l functions (makes
them into compat symbols, not available for new ports or static
linking).  The exp10 names for these functions are standardized (in TS
18661-4) and were added in the same glibc version (2.1) as pow10 so
source code can change to use them without any loss of portability.
Since pow10 is deliberately not provided for _Float128, only exp10,
this slightly simplifies moving to the new wrapper templates in the
!LIBM_SVID_COMPAT case, by avoiding needing to arrange for pow10,
pow10f and pow10l to be defined by those templates.

Tested for x86_64, and with build-many-glibcs.py.

	* manual/math.texi (pow10): Do not document.
	(pow10f): Likewise.
	(pow10l): Likewise.
	* math/bits/mathcalls.h [__USE_GNU] (pow10): Do not declare.
	* math/bits/math-finite.h [__USE_GNU] (pow10): Likewise.
	* math/libm-test-exp10.inc (pow10_test): Remove.
	(do_test): Do not call pow10.
	* math/w_exp10_compat.c (pow10): Make into compat symbol.
	[NO_LONG_DOUBLE] (pow10l): Likewise.
	* math/w_exp10f_compat.c (pow10f): Likewise.
	* math/w_exp10l_compat.c (pow10l): Likewise.
	* sysdeps/ia64/fpu/e_exp10.S: Include <shlib-compat.h>.
	(pow10): Make into compat symbol.
	* sysdeps/ia64/fpu/e_exp10f.S: Include <shlib-compat.h>.
	(pow10f): Make into compat symbol.
	* sysdeps/ia64/fpu/e_exp10l.S: Include <shlib-compat.h>.
	(pow10l): Make into compat symbol.
	* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Remove
	pow10.
	(CFLAGS-nldbl-pow10.c): Remove variable..
	* sysdeps/ieee754/ldbl-opt/nldbl-pow10.c: Remove file.
	* sysdeps/ieee754/ldbl-opt/w_exp10_compat.c (pow10l): Condition on
	[SHLIB_COMPAT (libm, GLIBC_2_1, GLIBC_2_27)].
	* sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c (compat_symbol):
	Undefine and redefine.
	(pow10l): Make into compat symbol.
	* sysdeps/aarch64/libm-test-ulps: Remove pow10 ulps.
	* sysdeps/alpha/fpu/libm-test-ulps: Likewise.
	* sysdeps/arm/libm-test-ulps: Likewise.
	* sysdeps/hppa/fpu/libm-test-ulps: Likewise.
	* sysdeps/i386/fpu/libm-test-ulps: Likewise.
	* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
	* sysdeps/microblaze/libm-test-ulps: Likewise.
	* sysdeps/mips/mips32/libm-test-ulps: Likewise.
	* sysdeps/mips/mips64/libm-test-ulps: Likewise.
	* sysdeps/nios2/libm-test-ulps: Likewise.
	* sysdeps/powerpc/fpu/libm-test-ulps: Likewise.
	* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
	* sysdeps/s390/fpu/libm-test-ulps: Likewise.
	* sysdeps/sh/libm-test-ulps: Likewise.
	* sysdeps/sparc/fpu/libm-test-ulps: Likewise.
	* sysdeps/tile/libm-test-ulps: Likewise.
	* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
 2017-09-01 21:13:18 +00:00
Stefan Liebler
e9f57484aa S390: Add new s390 platform z14. 
The new IBM z14 is added to platform string array.
The macro _DL_PLATFORMS_COUNT is incremented.

ChangeLog:

	* sysdeps/s390/dl-procinfo.c (_dl_s390_cap_flags): Add z14.
	* sysdeps/s390/dl-procinfo.h (_DL_PLATFORMS_COUNT): Increased.
 2017-08-15 14:00:07 +02:00
Joseph Myers
073e8fa773 Require binutils 2.25 or later to build glibc. 
This patch implements a requirement of binutils >= 2.25 (up from 2.22)
to build glibc.  Tests for 2.24 or later on x86_64 and s390 are
removed.  It was already the case, as indicated by buildbot results,
that 2.24 was too old for building tests for 32-bit x86 (produced
internal linker errors linking elf/tst-gnu2-tls1mod.so).  I don't know
if any configure tests for binutils features are obsolete given the
increased version requirement.

Tested for x86_64.

	* configure.ac (AS): Require binutils 2.25 or later.
	(LD): Likewise.
	* configure: Regenerated.
	* sysdeps/s390/configure.ac (AS): Remove version check.
	* sysdeps/s390/configure: Regenerated.
	* sysdeps/x86_64/configure.ac (AS): Remove version check.
	* sysdeps/x86_64/configure: Regenerated.
	* manual/install.texi (Tools for Compilation): Document
	requirement for binutils 2.25 or later.
	* INSTALL: Regenerated.
 2017-06-28 11:31:50 +00:00
Stefan Liebler
a37b5daa6b S390: Use cu21 instruction for converting from utf16 to utf8. 
This patch adds an ifunc variant to use the cu instruction on arch12 CPUs.
This new ifunc variant can be built if binutils support z13 vector
instructions.  At runtime, HWCAP_S390_VXE decides if we can use the
cu21 instruction.

ChangeLog:

	* sysdeps/s390/utf8-utf16-z9.c (__to_utf8_loop_vx_cu):
	Use vector and cu21 instruction.
	* sysdeps/s390/multiarch/utf8-utf16-z9.c:
	Add __to_utf8_loop_vx_cu in ifunc resolver.
 2017-06-27 17:09:43 +02:00
Stefan Liebler
f0137ff31d S390: Use cu24 instruction for converting from utf16 to utf32. 
This patch adds an ifunc variant to use the cu instruction on arch12 CPUs.
This new ifunc variant can be built if binutils support z13 vector
instructions.  At runtime, HWCAP_S390_VXE decides if we can use the
cu24 instruction.

ChangeLog:

	* sysdeps/s390/utf16-utf32-z9.c (__from_utf16_loop_vx_cu):
	Use vector and cu24 instruction.
    	* sysdeps/s390/multiarch/utf16-utf32-z9.c:
    	Add __from_utf16_loop_vx_cu in ifunc resolver.
 2017-06-27 17:09:43 +02:00
Stefan Liebler
593e4da186 S390: Use cu42 instruction for converting from utf32 to utf16. 
This patch adds an ifunc variant to use the cu instruction on arch12 CPUs.
This new ifunc variant can be built if binutils support z13 vector
instructions.  At runtime, HWCAP_S390_VXE decides if we can use the
cu42 instruction.

ChangeLog:

	* sysdeps/s390/utf16-utf32-z9.c (__to_utf16_loop_vx_cu):
	Use vector and cu42 instruction.
	* sysdeps/s390/multiarch/utf16-utf32-z9.c:
	Add __to_utf16_loop_vx_cu in ifunc resolver.
 2017-06-27 17:09:43 +02:00
Stefan Liebler
23ea69a9d6 S390: Use cu41 instruction for converting from utf32 to utf8. 
This patch adds an ifunc variant to use the cu instruction on arch12 CPUs.
This new ifunc variant can be built if binutils support z13 vector
instructions.  At runtime, HWCAP_S390_VXE decides if we can use the
cu41 instruction.

ChangeLog:

	* sysdeps/s390/utf8-utf32-z9.c (__to_utf8_loop_vx_cu):
	Use vector and cu41 instruction.
	* sysdeps/s390/multiarch/utf8-utf32-z9.c: Add __to_utf8_loop_vx_cu
	in ifunc resolver.
 2017-06-27 17:09:42 +02:00
Stefan Liebler
f21f59124d S390: Add new hwcap values for new cpu architecture - arch12. 
The new hwcap values indicate support for:
- Vector packed decimal facility
- Vector enhancements facility 1
- Guarded storage facility

Note: arch12 is NOT the official name of the new CPU.
It refers to the edition number of the Principle of Operations manual.

ChangeLog:

	* sysdeps/s390/dl-procinfo.c (_dl_s390_cap_flags):
	Add vxd, vxe, gs flag.
	* sysdeps/s390/dl-procinfo.h: Add HWCAP_S390_VXD, HWCAP_S390_VXE,
	HWCAP_S390_GS capability.
	* sysdeps/unix/sysv/linux/s390/bits/hwcap.h
	(HWCAP_S390_VXD, HWCAP_S390_VXE, HWCAP_S390_GS): Define.
 2017-06-27 17:09:42 +02:00
Stefan Liebler
83653f804d S390: Save and restore r12 in TLS_IE macro. 
The testcases elf/tst-tls1-static and elf/tst-tls2-static
are failing on s390 if gcc is configured with --enable-default-pie.

According to binutils, there are only four valid cases for IE -> LE transition:
lg %rx,(0,%ry)    -> sllg %rx,%ry,0
lg %rx,(%ry,0)    -> sllg %rx,%ry,0
lg %rx,(%ry,%r12) -> sllg %rx,%ry,0
lg %rx,(%r12,%ry) -> sllg %rx,%ry,0

Thus I've adjusted the TLS_IE macro in s390 tls-macros.h files in PIC case
in order to use r12 for the address of global offset table.
The adjusted macro definition is not used if gcc is not configured with
--enable-default-pie.

ChangeLog:

	* sysdeps/s390/s390-32/tls-macros.h (TLS_IE): Use r12 for GOT address.
	* sysdeps/s390/s390-64/tls-macros.h (TLS_IE): Likewise.
 2017-06-27 15:23:43 +02:00
Zack Weinberg
09a596cc2c Remove bits/string.h. 
These machine-dependent inline string functions have never been on by
default, and even if they were a good idea at the time they were
introduced, they haven't really been touched in ten to fifteen years
and probably aren't a good idea on current-gen processors.  Current
thinking is that this class of optimization is best left to the
compiler.

	* bits/string.h, string/bits/string.h
	* sysdeps/aarch64/bits/string.h
	* sysdeps/m68k/m680x0/m68020/bits/string.h
	* sysdeps/s390/bits/string.h, sysdeps/sparc/bits/string.h
	* sysdeps/x86/bits/string.h: Delete file.

	* string/string.h: Don't include bits/string.h.
	* string/bits/string3.h: Rename to bits/string_fortified.h.
	No need to undef various symbols that the removed headers
	might have defined as macros.
	* string/Makefile (headers): Remove bits/string.h, change
	bits/string3.h to bits/string_fortified.h.
	* string/string-inlines.c: Update commentary.  Remove definitions
	of various macros that nothing looks at anymore.  Don't directly
	include bits/string.h. Set _STRING_INLINE_unaligned here, based on
	compiler-predefined macros.
	* string/strncat.c: If STRNCAT is not defined, or STRNCAT_PRIMARY
	_is_ defined, provide internal hidden alias __strncat.
	* include/string.h: Declare internal hidden alias __strncat.
	Only forward __stpcpy to __builtin_stpcpy if __NO_STRING_INLINES is
	not defined.
	* include/bits/string3.h: Rename to bits/string_fortified.h,
	update to match above.

	* sysdeps/i386/string-inlines.c: Define compat symbols for
	everything formerly defined by sysdeps/x86/bits/string.h.
	Make existing definitions into compat symbols as well.
	Remove some no-longer-necessary messing around with macros.

	* sysdeps/powerpc/powerpc32/power4/multiarch/mempcpy.c
	* sysdeps/powerpc/powerpc64/multiarch/mempcpy.c
	* sysdeps/powerpc/powerpc64/multiarch/stpcpy.c
	* sysdeps/s390/multiarch/mempcpy.c
	No need to define _HAVE_STRING_ARCH_mempcpy.
	Do define __NO_STRING_INLINES and NO_MEMPCPY_STPCPY_REDIRECT.

	* sysdeps/i386/i686/multiarch/strncat-c.c
	* sysdeps/s390/multiarch/strncat-c.c
	* sysdeps/x86_64/multiarch/strncat-c.c
	Define STRNCAT_PRIMARY.  Don't change definition of libc_hidden_def.
 2017-06-20 08:21:24 -04:00
Stefan Liebler
b08a6a0dea S390: Sync ptrace.h with kernel. [BZ #21539] 
This patch removes PTRACE_GETREGS, PTRACE_SETREGS, PTRACE_GETFPREGS
and PTRACE_SETFPREGS as these requests does not exist on s390 kernel.

But the kernel has support for PTRACE_SINGLEBLOCK,
PTRACE_SECCOMP_GET_FILTER, PTRACE_PEEKUSR_AREA, PTRACE_POKEUSR_AREA,
PTRACE_GET_LAST_BREAK, PTRACE_ENABLE_TE, PTRACE_DISABLE_TE and
PTRACE_TE_ABORT_RAND.  Thus those are defined now.

The current kernel s390 specific ptrace.h file also defines
PTRACE_PEEKTEXT_AREA, PTRACE_PEEKDATA_AREA, PTRACE_POKETEXT_AREA,
PTRACE_POKEDATA_AREA, PTRACE_PEEK_SYSTEM_CALL, PTRACE_POKE_SYSTEM_CALL
and PTRACE_PROT, but those requests are not supported.
Thus those defines are skipped in glibc ptrace.h.

There were old includes of ptrace.h in sysdeps/s390/fpu/fesetenv.c.
The ptrace feature isn't used there anymore, thus I removed the includes.

Before this patch, <glibc>/sysdeps/unix/sysv/linux/s390/sys/ptrace.h
uses ptrace-request 12 for PTRACE_GETREGS,
but <kernel>/include/uapi/linux/ptrace.h uses 12 for PTRACE_SINGLEBLOCK.

The s390 kernel has never had support for PTRACE_GETREGS!
Thus glibc ptrace.h is adjusted to match kernel ptrace.h.

The new s390 specific test ensures, that PTRACE_SINGLEBLOCK defined
in glibc works as expected.  If the kernel would interpret it as
PTRACE_GETREGS, then the testcase will not make any progress
and will time out.

ChangeLog:

	[BZ #21539]
	* NEWS: Mention s390 ptrace request changes.
	* sysdeps/unix/sysv/linux/s390/sys/ptrace.h
	(PTRACE_GETREGS, PTRACE_SETREGS, PTRACE_GETFPREGS,
	PTRACE_SETFPREGS): Remove enum constant.
	(PT_GETREGS, PT_SETREGS, PT_GETFPREGS, T_SETFPREGS):
	Remove defines.
	(PTRACE_SINGLEBLOCK): New enum constant.
	(PT_STEPBLOCK): New define.
	(PTRACE_PEEKUSR_AREA, PTRACE_POKEUSR_AREA,
	PTRACE_GET_LAST_BREAK, PTRACE_ENABLE_TE, PTRACE_DISABLE_TE,
	PTRACE_TE_ABORT_RAND): New enum constant and define.
	* sysdeps/s390/fpu/fesetenv.c: Remove ptrace.h includes.
	* sysdeps/unix/sysv/linux/s390/tst-ptrace-singleblock.c:
	New file.
	* sysdeps/unix/sysv/linux/s390/Makefile: Add test.
 2017-06-19 16:27:25 +02:00
Stefan Liebler
5e5b3b8866 S390: Fix build with gcc configured with --enable-default-pie. [BZ #21537] 
Building glibc with gcc configured with --enable-default-pie failed on s390
due to assembler messages:
../sysdeps/unix/sysv/linux/s390/s390-32/__makecontext_ret.S:44:
Error: junk at end of line, first unrecognized character is `@'

HIDDEN_JUMPTARGET was expanded to exit@PLT@GOTOFF.
If SHARED is not defined, HIDDEN_JUMPTARGET is defined to JUMPTARGET
in sysdeps/s390/s390-32/sysdep.h.  There it expanded to exit@PLT
in non SHARED case as PIC is defined if gcc is configured with
--enable-default-pie. Thus I've changed the "ifdef PIC" to "ifdef SHARED"
as we do not want PLTs in the static obj files.  I've also changed this
in sysdeps/s390/s390-64/sysdep.h.

I've also adjusted sysdeps/unix/sysv/linux/s390/s390-32/__makecontext_ret.S.
If glibc is configured with --disable-hidden-plt, then NO_HIDDEN is defined.
In SHARED case HIDDEN_JUMPTARGET would be expanded to exit@PLT@GOTOFF
instead of __GI_exit@GOTOFF.
Now we jump to:
- __GI_exit if SHARED is defined
- exit@PLT if SHARED and NO_HIDDEN is defined
- exit if both are not defined.
On s390 31bit we have to setup GOT pointer in r12 if we use a PLT stub.
Therefore I use SYSCALL_PIC_SETUP from sysdep.h and added the missing semicolons.

ChangeLog:

	[BZ #21537]
	* sysdeps/s390/s390-32/sysdep.h (JUMPTARGET, SYSCALL_PIC_SETUP):
	Check SHARED instead of PIC.
	(SYSCALL_PIC_SETUP): Add missing semicolons.
	* sysdeps/s390/s390-64/sysdep.h (JUMPTARGET, SYSCALL_PIC_SETUP):
	Check SHARED instead of PIC.
	* sysdeps/unix/sysv/linux/s390/s390-32/__makecontext_ret.S
	(__makecontext_ret): Adjust code to jump to exit.
 2017-06-19 11:08:58 +02:00
Alan Modra
0572433b5b PowerPC64 ELFv2 PPC64_OPT_LOCALENTRY 
ELFv2 functions with localentry:0 are those with a single entry point,
ie. global entry == local entry, that have no requirement on r2 or
r12 and guarantee r2 is unchanged on return.  Such an external
function can be called via the PLT without saving r2 or restoring it
on return, avoiding a common load-hit-store for small functions.

This patch implements the ld.so changes necessary for this
optimization.  ld.so needs to check that an optimized plt call
sequence is in fact calling a function implemented with localentry:0,
end emit a fatal error otherwise.

The elf/testobj6.c change is to stop "error while loading shared
libraries: expected localentry:0 `preload'" when running
elf/preloadtest, which we'd get otherwise.

	* elf/elf.h (PPC64_OPT_LOCALENTRY): Define.
	* sysdeps/alpha/dl-machine.h (elf_machine_fixup_plt): Add
	refsym and sym parameters.  Adjust callers.
	* sysdeps/aarch64/dl-machine.h (elf_machine_fixup_plt): Likewise.
	* sysdeps/arm/dl-machine.h (elf_machine_fixup_plt): Likewise.
	* sysdeps/generic/dl-machine.h (elf_machine_fixup_plt): Likewise.
	* sysdeps/hppa/dl-machine.h (elf_machine_fixup_plt): Likewise.
	* sysdeps/i386/dl-machine.h (elf_machine_fixup_plt): Likewise.
	* sysdeps/ia64/dl-machine.h (elf_machine_fixup_plt): Likewise.
	* sysdeps/m68k/dl-machine.h (elf_machine_fixup_plt): Likewise.
	* sysdeps/microblaze/dl-machine.h (elf_machine_fixup_plt): Likewise.
	* sysdeps/mips/dl-machine.h (elf_machine_fixup_plt): Likewise.
	* sysdeps/nios2/dl-machine.h (elf_machine_fixup_plt): Likewise.
	* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_fixup_plt):
	Likewise.
	* sysdeps/s390/s390-32/dl-machine.h (elf_machine_fixup_plt): Likewise.
	* sysdeps/s390/s390-64/dl-machine.h (elf_machine_fixup_plt): Likewise.
	* sysdeps/sh/dl-machine.h (elf_machine_fixup_plt): Likewise.
	* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_fixup_plt): Likewise.
	* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_fixup_plt): Likewise.
	* sysdeps/tile/dl-machine.h (elf_machine_fixup_plt): Likewise.
	* sysdeps/x86_64/dl-machine.h (elf_machine_fixup_plt): Likewise.
	* sysdeps/powerpc/powerpc64/dl-machine.c (_dl_error_localentry): New.
	(_dl_reloc_overflow): Increase buffser size.  Formatting.
	* sysdeps/powerpc/powerpc64/dl-machine.h (ppc64_local_entry_offset):
	Delete reloc param, add refsym and sym.  Check optimized plt
	call stubs for localentry:0 functions.  Adjust callers.
	(elf_machine_fixup_plt, elf_machine_plt_conflict): Add refsym
	and sym parameters.  Adjust callers.
	(_dl_reloc_overflow): Move attribute.
	(_dl_error_localentry): Declare.
	* elf/dl-runtime.c (_dl_fixup): Save original sym.  Pass
	refsym and sym to elf_machine_fixup_plt.
	* elf/testobj6.c (preload): Call printf.
 2017-06-14 10:47:25 +09:30
Stefan Liebler
4bf7abaeb3 S390: Use generic spinlock code. 
This patch removes the s390 specific implementation of spinlock code
and is now using the generic one.

ChangeLog:

	* sysdeps/s390/nptl/pthread_spin_init.c: Delete File.
	* sysdeps/s390/nptl/pthread_spin_lock.c: Likewise.
	* sysdeps/s390/nptl/pthread_spin_trylock.c: Likewise.
	* sysdeps/s390/nptl/pthread_spin_unlock.c: Likewise.
 2017-06-06 09:41:56 +02:00
Stefan Liebler
12d2dd7060 Optimize generic spinlock code and use C11 like atomic macros. 
This patch optimizes the generic spinlock code.

The type pthread_spinlock_t is a typedef to volatile int on all archs.
Passing a volatile pointer to the atomic macros which are not mapped to the
C11 atomic builtins can lead to extra stores and loads to stack if such
a macro creates a temporary variable by using "__typeof (*(mem)) tmp;".
Thus, those macros which are used by spinlock code - atomic_exchange_acquire,
atomic_load_relaxed, atomic_compare_exchange_weak - have to be adjusted.
According to the comment from  Szabolcs Nagy, the type of a cast expression is
unqualified (see http://www.open-std.org/jtc1/sc22/wg14/www/docs/dr_423.htm):
__typeof ((__typeof (*(mem)) *(mem)) tmp;
Thus from spinlock perspective the variable tmp is of type int instead of
type volatile int.  This patch adjusts those macros in include/atomic.h.
With this construct GCC >= 5 omits the extra stores and loads.

The atomic macros are replaced by the C11 like atomic macros and thus
the code is aligned to it.  The pthread_spin_unlock implementation is now
using release memory order instead of sequentially consistent memory order.
The issue with passed volatile int pointers applies to the C11 like atomic
macros as well as the ones used before.

I've added a glibc_likely hint to the first atomic exchange in
pthread_spin_lock in order to return immediately to the caller if the lock is
free.  Without the hint, there is an additional jump if the lock is free.

I've added the atomic_spin_nop macro within the loop of plain reads.
The plain reads are also realized by C11 like atomic_load_relaxed macro.

The new define ATOMIC_EXCHANGE_USES_CAS determines if the first try to acquire
the spinlock in pthread_spin_lock or pthread_spin_trylock is an exchange
or a CAS.  This is defined in atomic-machine.h for all architectures.

The define SPIN_LOCK_READS_BETWEEN_CMPXCHG is now removed.
There is no technical reason for throwing in a CAS every now and then,
and so far we have no evidence that it can improve performance.
If that would be the case, we have to adjust other spin-waiting loops
elsewhere, too!  Using a CAS loop without plain reads is not a good idea
on many targets and wasn't used by one.  Thus there is now no option to
do so.

Architectures are now using the generic spinlock automatically if they
do not provide an own implementation.  Thus the pthread_spin_lock.c files
in sysdeps folder are deleted.

ChangeLog:

	* NEWS: Mention new spinlock implementation.
	* include/atomic.h:
	(__atomic_val_bysize): Cast type to omit volatile qualifier.
	(atomic_exchange_acq): Likewise.
	(atomic_load_relaxed): Likewise.
	(ATOMIC_EXCHANGE_USES_CAS): Check definition.
	* nptl/pthread_spin_init.c (pthread_spin_init):
	Use atomic_store_relaxed.
	* nptl/pthread_spin_lock.c (pthread_spin_lock):
	Use C11-like atomic macros.
	* nptl/pthread_spin_trylock.c (pthread_spin_trylock):
	Likewise.
	* nptl/pthread_spin_unlock.c (pthread_spin_unlock):
	Use atomic_store_release.
	* sysdeps/aarch64/nptl/pthread_spin_lock.c: Delete File.
	* sysdeps/arm/nptl/pthread_spin_lock.c: Likewise.
	* sysdeps/hppa/nptl/pthread_spin_lock.c: Likewise.
	* sysdeps/m68k/nptl/pthread_spin_lock.c: Likewise.
	* sysdeps/microblaze/nptl/pthread_spin_lock.c: Likewise.
	* sysdeps/mips/nptl/pthread_spin_lock.c: Likewise.
	* sysdeps/nios2/nptl/pthread_spin_lock.c: Likewise.
	* sysdeps/aarch64/atomic-machine.h (ATOMIC_EXCHANGE_USES_CAS): Define.
	* sysdeps/alpha/atomic-machine.h: Likewise.
	* sysdeps/arm/atomic-machine.h: Likewise.
	* sysdeps/i386/atomic-machine.h: Likewise.
	* sysdeps/ia64/atomic-machine.h: Likewise.
	* sysdeps/m68k/coldfire/atomic-machine.h: Likewise.
	* sysdeps/m68k/m680x0/m68020/atomic-machine.h: Likewise.
	* sysdeps/microblaze/atomic-machine.h: Likewise.
	* sysdeps/mips/atomic-machine.h: Likewise.
	* sysdeps/powerpc/powerpc32/atomic-machine.h: Likewise.
	* sysdeps/powerpc/powerpc64/atomic-machine.h: Likewise.
	* sysdeps/s390/atomic-machine.h: Likewise.
	* sysdeps/sparc/sparc32/atomic-machine.h: Likewise.
	* sysdeps/sparc/sparc32/sparcv9/atomic-machine.h: Likewise.
	* sysdeps/sparc/sparc64/atomic-machine.h: Likewise.
	* sysdeps/tile/tilegx/atomic-machine.h: Likewise.
	* sysdeps/tile/tilepro/atomic-machine.h: Likewise.
	* sysdeps/unix/sysv/linux/hppa/atomic-machine.h: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/atomic-machine.h: Likewise.
	* sysdeps/unix/sysv/linux/nios2/atomic-machine.h: Likewise.
	* sysdeps/unix/sysv/linux/sh/atomic-machine.h: Likewise.
	* sysdeps/x86_64/atomic-machine.h: Likewise.
 2017-06-06 09:41:56 +02:00
Adhemerval Zanella
eab380d8ec Move shared pthread definitions to common headers 
This patch removes all the replicated pthread definition accross the
architectures and consolidates it on shared headers.  The new
organization is as follow:

  * Architecture specific definition (such as pthread types sizes) are
    place in the new pthreadtypes-arch.h header in arch specific path.

  * All shared structure definition are moved to a common NPTL header
    at sysdeps/nptl/bits/pthreadtypes.h (with now includes the arch
    specific one for internal definitions).

  * Also, for C11 future thread support, both mutex and condition
    definition are placed in a common header at
    sysdeps/nptl/bits/thread-shared-types.h.

It is also a refactor patch without expected functional changes.
Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu,
arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu,
m68k-linux-gnu, microblaze-linux-gnu, mips{64}-linux-gnu, nios2-linux-gnu,
powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu,
tile{pro,gx}-linux-gnu, and x86_64-linux-gnu).

	* posix/Makefile (headers): Add pthreadtypes-arch.h and
	thread-shared-types.h.
	* sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h: New file: arch
	specific thread definition.
	* sysdeps/alpha/nptl/bits/pthreadtypes-arch.h: Likewise.
	* sysdeps/arm/nptl/bits/pthreadtypes-arch.h: Likewise.
	* sysdeps/hppa/nptl/bits/pthreadtypes-arch.h: Likewise.
	* sysdeps/ia64/nptl/bits/pthreadtypes-arch.h: Likewise.
	* sysdeps/m68k/nptl/bits/pthreadtypes-arch.h: Likewise.
	* sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h: Likewise.
	* sysdeps/mips/nptl/bits/pthreadtypes-arch.h: Likewise.
	* sysdeps/nios2/nptl/bits/pthreadtypes-arch.h: Likewise.
	* sysdeps/powerpc/nptl/bits/pthreadtypes-arch.h: Likewise.
	* sysdeps/s390/nptl/bits/pthreadtypes-arch.h: Likewise.
	* sysdeps/sh/nptl/bits/pthreadtypes-arch.h: Likewise.
	* sysdeps/sparc/nptl/bits/pthreadtypes-arch.h: Likewise.
	* sysdeps/tile/nptl/bits/pthreadtypes-arch.h: Likewise.
	* sysdeps/x86/nptl/bits/pthreadtypes-arch.h: Likewise.
	* sysdeps/nptl/bits/thread-shared-types.h: New file: shared
	thread definition between POSIX and C11.
	* sysdeps/aarch64/nptl/bits/pthreadtypes.h.: Remove file.
	* sysdeps/alpha/nptl/bits/pthreadtypes.h: Likewise.
	* sysdeps/arm/nptl/bits/pthreadtypes.h: Likewise.
	* sysdeps/hppa/nptl/bits/pthreadtypes.h: Likewise.
	* sysdeps/m68k/nptl/bits/pthreadtypes.h: Likewise.
	* sysdeps/microblaze/nptl/bits/pthreadtypes.h: Likewise.
	* sysdeps/mips/nptl/bits/pthreadtypes.h: Likewise.
	* sysdeps/nios2/nptl/bits/pthreadtypes.h: Likewise.
	* sysdeps/ia64/nptl/bits/pthreadtypes.h: Likewise.
	* sysdeps/powerpc/nptl/bits/pthreadtypes.h: Likewise.
	* sysdeps/s390/nptl/bits/pthreadtypes.h: Likewise.
	* sysdeps/sh/nptl/bits/pthreadtypes.h: Likewise.
	* sysdeps/sparc/nptl/bits/pthreadtypes.h: Likewise.
	* sysdeps/tile/nptl/bits/pthreadtypes.h: Likewise.
	* sysdeps/x86/nptl/bits/pthreadtypes.h: Likewise.
	* sysdeps/nptl/bits/pthreadtypes.h: New file: common thread
	definitions shared across all architectures.
 2017-05-09 17:49:17 -03:00
Zack Weinberg
2bfdaeddaa Rename cppflags-iterator.mk to libof-iterator.mk, remove extra-modules.mk. 
cppflags-iterator.mk no longer has anything to do with CPPFLAGS; all
it does is set libof-$(foo) for a list of files.  extra-modules.mk
does the same thing, but with a different input variable, and doesn't
let the caller control the module.  Therefore, this patch gives
cppflags-iterator.mk a better name, removes extra-modules.mk, and
updates all uses of both.

	* extra-modules.mk: Delete file.
	* cppflags-iterator.mk: Rename to ...
	* libof-iterator.mk: ...this.  Adjust comments.

	* Makerules, extra-lib.mk, benchtests/Makefile, elf/Makefile
	* elf/rtld-Rules, iconv/Makefile, locale/Makefile, malloc/Makefile
	* nscd/Makefile, sunrpc/Makefile, sysdeps/s390/Makefile:
	Use libof-iterator.mk instead of cppflags-iterator.mk or
	extra-modules.mk.

	* benchtests/strcoll-inputs/filelist#en_US.UTF-8: Remove
	extra-modules.mk and cppflags-iterator.mk, add libof-iterator.mk.
 2017-05-09 07:06:29 -04:00
Stefan Liebler
61f4fa7fd7 S390: Regenerate ULPs 
Updated ulps file - Needed if build with GCC 7.

ChangeLog:

	* sysdeps/s390/fpu/libm-test-ulps: Regenerated.
 2017-05-09 09:18:09 +02:00
Stefan Liebler
5ea9ce3749 S390: Move utf8-utf32-z9.c to multiarch folder and use s390_libc_ifunc_expr macro. 
The utf8-utf32-z9.c iconv module is using ifunc and thus the ifunc part should
be in multiarch folder.  Otherwise ifunc is used even if you configure
with --disable-multi-arch.

This patch moves the ifunc resolvers to the new file
sysdeps/s390/multiarch/utf8-utf32-z9.c. The resolvers are now implemented
with s390_libc_ifunc_expr macro instead of using gcc attribute ifunc directly.

The ifunc versions are implemented in sysdeps/s390/utf8-utf32-z9.c.
Each version is only implemented if needed or supported.  Therefore there is
a block at beginning of the file which selects the versions which should be
defined depending on support for multiarch, vector-support and used minimum
architecture level.  This block defines HAVE_[FROM|TO]_[C|CU|VX] to 1 or 0.
The code below is rearranged and surrounded
by #if HAVE_[FROM|TO]_[C|CU|VX] == 1.  There is no functional change.

The cu instructions are z9 zarch instructions.  As the major distros are
already using the newer z196 as architecture level set, those instructions
can be used as fallback version instead of the c-code.  This behaviour is
decided at compile time via HAVE_S390_MIN_Z196_ZARCH_ASM_SUPPORT.

ChangeLog:

	* sysdeps/s390/multiarch/utf8-utf32-z9.c: New File.
	* sysdeps/s390/utf8-utf32-z9.c: Move ifunc resolvers to multiarch
	folder and define ifunc versions depending on HAVE_[FROM|TO]_[C|CU|VX].
	(HAVE_FROM_C, HAVE_FROM_CU, HAVE_FROM_VX, HAVE_TO_C, HAVE_TO_VX,
	FROM_LOOP_DEFAULT, FROM_LOOP_C, FROM_LOOP_CU, FROM_LOOP_VX,
	TO_LOOP_DEFAULT, TO_LOOP_C, TO_LOOP_VX): New Define.
 2017-04-21 15:30:00 +02:00
Stefan Liebler
85286aaf1d S390: Move utf16-utf32-z9.c to multiarch folder and use s390_libc_ifunc_expr macro. 
The utf16-utf32-z9.c iconv module is using ifunc and thus the ifunc part should
be in multiarch folder.  Otherwise ifunc is used even if you configure
with --disable-multi-arch.

This patch moves the ifunc resolvers to the new file
sysdeps/s390/multiarch/utf16-utf32-z9.c. The resolvers are now implemented
with s390_libc_ifunc_expr macro instead of using gcc attribute ifunc directly.

The ifunc versions are implemented in sysdeps/s390/utf16-utf32-z9.c.
Each version is only implemented if needed or supported.  Therefore there is
a block at beginning of the file which selects the versions which should be
defined depending on support for multiarch, vector-support and used minimum
architecture level.  This block defines HAVE_[FROM|TO]_[C|VX] to 1 or 0.
The code below is rearranged and surrounded
by #if HAVE_[FROM|TO]_[C|VX] == 1.  There is no functional change.

ChangeLog:

	* sysdeps/s390/multiarch/utf16-utf32-z9.c: New File.
	* sysdeps/s390/utf16-utf32-z9.c: Move ifunc resolvers to multiarch
	folder and define ifunc versions depending on HAVE_[FROM|TO]_[C|VX].
	(HAVE_FROM_C, HAVE_FROM_VX, HAVE_TO_C, HAVE_TO_VX, FROM_LOOP_DEFAULT,
	FROM_LOOP_C, FROM_LOOP_VX, TO_LOOP_DEFAULT, TO_LOOP_C, TO_LOOP_VX):
	New Define.
 2017-04-21 15:30:00 +02:00
Stefan Liebler
df6cc7ee3b S390: Move utf8-utf16-z9.c to multiarch folder and use s390_libc_ifunc_expr macro. 
The utf8-utf16-z9.c iconv module is using ifunc and thus the ifunc part should
be in multiarch folder.  Otherwise ifunc is used even if you configure
with --disable-multi-arch.

This patch moves the ifunc resolvers to the new file
sysdeps/s390/multiarch/utf8-utf16-z9.c. The resolvers are now implemented
with s390_libc_ifunc_expr macro instead of using gcc attribute ifunc directly.

The ifunc versions are implemented in sysdeps/s390/utf8-utf16-z9.c.
Each version is only implemented if needed or supported.  Therefore there is
a block at beginning of the file which selects the versions which should be
defined depending on support for multiarch, vector-support and used minimum
architecture level.  This block defines HAVE_[FROM|TO]_[C|CU|VX] to 1 or 0.
The code below is rearranged and surrounded
by #if HAVE_[FROM|TO]_[C|CU|VX] == 1.  There is no functional change.

The cu instructions are z9 zarch instructions.  As the major distros are
already using the newer z196 as architecture level set, those instructions
can be used as fallback version instead of the c-code.  This behaviour is
decided at compile time via HAVE_S390_MIN_Z196_ZARCH_ASM_SUPPORT.

ChangeLog:

	* sysdeps/s390/multiarch/utf8-utf16-z9.c: New File.
	* sysdeps/s390/utf8-utf16-z9.c: Move ifunc resolvers to multiarch
	folder and define ifunc versions depending on HAVE_[FROM|TO]_[C|CU|VX].
	(HAVE_FROM_C, HAVE_FROM_CU, HAVE_FROM_VX, HAVE_TO_C, HAVE_TO_VX,
	FROM_LOOP_DEFAULT, FROM_LOOP_C, FROM_LOOP_CU, FROM_LOOP_VX,
	TO_LOOP_DEFAULT, TO_LOOP_C, TO_LOOP_VX): New Define.
 2017-04-21 15:30:00 +02:00
Stefan Liebler
51213e2b8d S390: Use new s390_libc_ifunc_expr macro in s390 8bit-generic.c. 
This patch adds s390_libc_ifunc_expr macro which uses the __ifunc base macro
in include/libc-symbols.h and lets the user define a generic expression to
choose the correct ifunc variant.  Furthermore as the base macro is used,
the ifunc resolver functions are now also using inhibit_stack_protector.
S390 needs its own version due to the hwcap argument of the ifunc resolver.

This new macro is now used in iconv code in 8bit-generic.c instead of using
gcc attribute ifunc directly.

ChangeLog:

	* sysdeps/s390/multiarch/ifunc-resolve.h
	(s390_libc_ifunc_expr_init, s390_libc_ifunc_expr): New Define.
	* sysdeps/s390/multiarch/8bit-generic.c
	(__to_generic, __from_generic): Use s390_libc_ifunc_expr to
	define ifunc resolvers.
 2017-04-21 15:30:00 +02:00
Adhemerval Zanella
db3d848e15 Build divdi3 only for architecture that required it 
As noted in [1], divdi3 object is only exported in a handful ABIs
(i386, m68k, powerpc32, s390-32, and ia64), however it is built
for all current architectures regardless.

This patch refact the make rules for this object to so only the
aforementioned architectures that actually require it builds it.

Also, to avoid internal PLT calls to the exported symbol from the
module, glibc uses an internal header (symbol-hacks.h) which is
unrequired (and in fact breaks the build for architectures that
intend to get symbol definitions from libgcc.a).  The patch also
changes it to create its own header (divdi3-symbol-hacks.h) and
adjust the architectures that require it accordingly.

I checked the build/check (with run-built-tests=no) on the
following architectures (which I think must cover all supported
ABI/builds) using GCC 6.3:

aarch64-linux-gnu
alpha-linux-gnu
arm-linux-gnueabihf
hppa-linux-gnu
ia64-linux-gnu
m68k-linux-gnu
microblaze-linux-gnu
mips64-n32-linux-gnu
mips-linux-gnu
mips64-linux-gnu
nios2-linux-gnu
powerpc-linux-gnu
powerpc-linux-gnu-power4
powerpc64-linux-gnu
powerpc64le-linux-gnu
s390x-linux-gnu
s390-linux-gnu
sh4-linux-gnu
sh4-linux-gnu-soft
sparc64-linux-gnu
sparcv9-linux-gnu
tilegx-linux-gnu
tilegx-linux-gnu-32
tilepro-linux-gnu
x86_64-linux-gnu
x86_64-linux-gnu-x32
i686-linux-gnu

I only saw one regression on sparcv9-linux-gnu (extra PLT call to
.udiv) which I address in next patch in the set.  It also correctly
build SH with GCC 7.0.1 (without any regression from c89721e25d).

[1] https://sourceware.org/ml/libc-alpha/2017-03/msg00243.html

	* sysdeps/i386/symbol-hacks.h: New file.
	* sysdeps/m68k/symbol-hacks.h: New file.
	* sysdeps/powerpc/powerpc32/symbol-hacks.h: New file.
	* sysdeps/s390/s390-32/symbol-hacks.h: New file.
	* sysdeps/unix/sysv/linux/i386/Makefile
	[$(subdir) = csu] (sysdep_routines): New rule: divdi3 object.
	[$(subdir) = csu] (sysdep-only-routines): Likewise.
	[$(subdir) = csu] (CFLAGS-divdi3.c): Likewise.
	* sysdeps/unix/sysv/linux/m68k/Makefile
	[$(subdir) = csu] (sysdep_routines): Likewise.
	[$(subdir) = csu] (sysdep-only-routines): Likewise.
	[$(subdir) = csu] (CFLAGS-divdi3.c): Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/Makefile
	[$(subdir) = csu] (sysdep_routines): Likewise.
	[$(subdir) = csu] (sysdep-only-routines): Likewise.
	[$(subdir) = csu] (CFLAGS-divdi3.c): Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/Makefile
	[$(subdir) = csu] (sysdep_routines): Likewise.
	[$(subdir) = csu] (sysdep-only-routines): Likewise.
	[$(subdir) = csu] (CFLAGS-divdi3.c): Likewise.
	* sysdeps/wordsize-32/Makefile: Remove file.
	* sysdeps/wordsize-32/symbol-hacks.h: Definitions move to ...
	* sysdeps/wordsize-32/divdi3-symbol-hacks.h: ... here.
 2017-04-06 15:14:34 -03:00
Stefan Liebler
fce3da82e5 S390: Clobber also r14 in TLS_LD, TLS_GD macros on 31bit. 
This patch also clobbers r14 in TLS_LD, TLS_GD macros on 31bit.
This ensures that r14 isn't used to save and restore r12 while
r14 is clobbered by the bas-instruction.

As note:
r12 can't be added to clobber list as gcc would fail with:
error: PIC register clobbered by ‘12’ in ‘asm’

For 64bit this fix was already done in 2004 in the
commit b80af23ac6.

ChangeLog:

	* sysdeps/s390/s390-32/tls-macros.h (TLS_LD, TLS_GD):
	Clobber also r14.
 2017-04-04 13:16:28 +02:00
Andreas Schwab
605c5ef4fb Remove _dl_platform_string 
There are no non-trivial uses of _dl_platform_string.
 2017-03-14 17:18:52 +01:00
Stefan Liebler
93adfe2d79 Update auto-libm-test-out for catan / catanh. 
I've used gmp 6.1.2, mpfr 3.1.5 and upstream mpc with fix in mpc_atan
(https://scm.gforge.inria.fr/anonscm/gitweb?p=mpc/mpc.git;a=commit;h=958aac9b15a659d6fb5edcb11778123f8a35b14f)
to build gen-auto-libm-tests and regenerated  catan / catanh out files.
Regenerated ULPs for s390 from scratch.  Now the catan / catanh tests
are passing.

ChangeLog:

	* math/auto-libm-test-out-catan: Regenerated.
	* math/auto-libm-test-out-catanh: Likewise.
	* sysdeps/s390/fpu/libm-test-ulps: Likewise.
 2017-03-10 08:45:29 +01:00
Stefan Liebler
72280a9e55 S390: Regenerate ULPs 
Updated ulps file.
There are still fails for long double catan / catanh
due to MPC bug.  See post from Joseph Myers:
https://www.sourceware.org/ml/libc-alpha/2017-03/msg00099.html

ChangeLog:

	* sysdeps/s390/fpu/libm-test-ulps: Regenerated.
 2017-03-08 08:34:58 +01:00
Stefan Liebler
022c9fec9b S390: Optimize atomic macros. 
This patch activates C11 atomic builtins by defining
USE_ATOMIC_COMPILER_BUILTINS to 1.
Note:
E.g. in nptl/pthread_key_delete.c if compiled with GCCs 6 and before,
an extra stack-frame is generated and the old value is stored on stack
before cs instruction but it never loads this value from stack.
An unreleased GCC 7 omit those stack operations.

E.g. in nptl/pthread_once.c the condition code of cs instruction is
evaluated by a sequence of ipm, sra, compare and jump instructions instead
of one conditional jump instruction.  This also occurs with an unreleased
GCC 7.

These shortcomings does not really hurt.  Nevertheless, the gcc guys are
investigating those ones and plan to fix them before GCC 7 release.

The atomic_fetch_abc_def C11 builtins are now using load-and-abc instructions
on z196 zarch and higher cpus instead of a loop with compare-and-swap
instruction.

Some of the non-C11 atomic macros from include/atomic.h are now implemented
with help of the C11 atomic builtins.  The other non-C11 atomic macros
are using the macros defined here.

ChangeLog:

	* sysdeps/s390/atomic-machine.h
	(USE_ATOMIC_COMPILER_BUILTINS): Define to 1.
	(__arch_compare_and_exchange_val_8_acq,
	__arch_compare_and_exchange_val_16_acq,
	__arch_compare_and_exchange_val_32_acq,
	__arch_compare_and_exchange_val_64_acq):
	Delete macro.
	(atomic_compare_and_exchange_val_acq,
	atomic_compare_and_exchange_val_rel,
	atomic_compare_and_exchange_bool_acq,
	catomic_compare_and_exchange_bool_acq,
	atomic_exchange_acq, atomic_exchange_rel,
	atomic_exchange_and_add_acq,
	atomic_exchange_and_add_rel,
	catomic_exchange_and_add, atomic_or_val,
	atomic_or, catomic_or, atomic_bit_test_set,
	atomic_and_val, atomic_and, catomic_and):
	Define macros with help of C11 atomic builtins.
 2017-03-06 15:28:25 +01:00
Torvald Riegel
cc25c8b4c1 New pthread rwlock that is more scalable. 
This replaces the pthread rwlock with a new implementation that uses a
more scalable algorithm (primarily through not using a critical section
anymore to make state changes).  The fast path for rdlock acquisition and
release is now basically a single atomic read-modify write or CAS and a few
branches.  See nptl/pthread_rwlock_common.c for details.

	* nptl/DESIGN-rwlock.txt: Remove.
	* nptl/lowlevelrwlock.sym: Remove.
	* nptl/Makefile: Add new tests.
	* nptl/pthread_rwlock_common.c: New file.  Contains the new rwlock.
	* nptl/pthreadP.h (PTHREAD_RWLOCK_PREFER_READER_P): Remove.
	(PTHREAD_RWLOCK_WRPHASE, PTHREAD_RWLOCK_WRLOCKED,
	PTHREAD_RWLOCK_RWAITING, PTHREAD_RWLOCK_READER_SHIFT,
	PTHREAD_RWLOCK_READER_OVERFLOW, PTHREAD_RWLOCK_WRHANDOVER,
	PTHREAD_RWLOCK_FUTEX_USED): New.
	* nptl/pthread_rwlock_init.c (__pthread_rwlock_init): Adapt to new
	implementation.
	* nptl/pthread_rwlock_rdlock.c (__pthread_rwlock_rdlock_slow): Remove.
	(__pthread_rwlock_rdlock): Adapt.
	* nptl/pthread_rwlock_timedrdlock.c
	(pthread_rwlock_timedrdlock): Adapt.
	* nptl/pthread_rwlock_timedwrlock.c
	(pthread_rwlock_timedwrlock): Adapt.
	* nptl/pthread_rwlock_trywrlock.c (pthread_rwlock_trywrlock): Adapt.
	* nptl/pthread_rwlock_tryrdlock.c (pthread_rwlock_tryrdlock): Adapt.
	* nptl/pthread_rwlock_unlock.c (pthread_rwlock_unlock): Adapt.
	* nptl/pthread_rwlock_wrlock.c (__pthread_rwlock_wrlock_slow): Remove.
	(__pthread_rwlock_wrlock): Adapt.
	* nptl/tst-rwlock10.c: Adapt.
	* nptl/tst-rwlock11.c: Adapt.
	* nptl/tst-rwlock17.c: New file.
	* nptl/tst-rwlock18.c: New file.
	* nptl/tst-rwlock19.c: New file.
	* nptl/tst-rwlock2b.c: New file.
	* nptl/tst-rwlock8.c: Adapt.
	* nptl/tst-rwlock9.c: Adapt.
	* sysdeps/aarch64/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
	* sysdeps/arm/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
	* sysdeps/hppa/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
	* sysdeps/ia64/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
	* sysdeps/m68k/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
	* sysdeps/microblaze/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
	* sysdeps/mips/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
	* sysdeps/nios2/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
	* sysdeps/s390/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
	* sysdeps/sh/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
	* sysdeps/sparc/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
	* sysdeps/tile/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
	* sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h
	(pthread_rwlock_t): Adapt.
	* sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h
	(pthread_rwlock_t): Adapt.
	* sysdeps/x86/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
	* nptl/nptl-printers.py (): Adapt.
	* nptl/nptl_lock_constants.pysym: Adapt.
	* nptl/test-rwlock-printers.py: Adapt.
	* nptl/test-rwlockattr-printers.c: Adapt.
	* nptl/test-rwlockattr-printers.py: Adapt.
 2017-01-10 11:50:17 +01:00
Joseph Myers
bfff8b1bec Update copyright dates with scripts/update-copyrights. 2017-01-01 00:14:16 +00:00
Torvald Riegel
ed19993b5b New condvar implementation that provides stronger ordering guarantees. 
This is a new implementation for condition variables, required
after http://austingroupbugs.net/view.php?id=609 to fix bug 13165.  In
essence, we need to be stricter in which waiters a signal or broadcast
is required to wake up; this couldn't be solved using the old algorithm.
ISO C++ made a similar clarification, so this also fixes a bug in
current libstdc++, for example.

We can't use the old algorithm anymore because futexes do not guarantee
to wake in FIFO order.  Thus, when we wake, we can't simply let any
waiter grab a signal, but we need to ensure that one of the waiters
happening before the signal is woken up.  This is something the previous
algorithm violated (see bug 13165).

There's another issue specific to condvars: ABA issues on the underlying
futexes.  Unlike mutexes that have just three states, or semaphores that
have no tokens or a limited number of them, the state of a condvar is
the *order* of the waiters.  A waiter on a semaphore can grab a token
whenever one is available; a condvar waiter must only consume a signal
if it is eligible to do so as determined by the relative order of the
waiter and the signal.
Therefore, this new algorithm maintains two groups of waiters: Those
eligible to consume signals (G1), and those that have to wait until
previous waiters have consumed signals (G2).  Once G1 is empty, G2
becomes the new G1.  64b counters are used to avoid ABA issues.

This condvar doesn't yet use a requeue optimization (ie, on a broadcast,
waking just one thread and requeueing all others on the futex of the
mutex supplied by the program).  I don't think doing the requeue is
necessarily the right approach (but I haven't done real measurements
yet):
* If a program expects to wake many threads at the same time and make
that scalable, a condvar isn't great anyway because of how it requires
waiters to operate mutually exclusive (due to the mutex usage).  Thus, a
thundering herd problem is a scalability problem with or without the
optimization.  Using something like a semaphore might be more
appropriate in such a case.
* The scalability problem is actually at the mutex side; the condvar
could help (and it tries to with the requeue optimization), but it
should be the mutex who decides how that is done, and whether it is done
at all.
* Forcing all but one waiter into the kernel-side wait queue of the
mutex prevents/avoids the use of lock elision on the mutex.  Thus, it
prevents the only cure against the underlying scalability problem
inherent to condvars.
* If condvars use short critical sections (ie, hold the mutex just to
check a binary flag or such), which they should do ideally, then forcing
all those waiter to proceed serially with kernel-based hand-off (ie,
futex ops in the mutex' contended state, via the futex wait queues) will
be less efficient than just letting a scalable mutex implementation take
care of it.  Our current mutex impl doesn't employ spinning at all, but
if critical sections are short, spinning can be much better.
* Doing the requeue stuff requires all waiters to always drive the mutex
into the contended state.  This leads to each waiter having to call
futex_wake after lock release, even if this wouldn't be necessary.

	[BZ #13165]
	* nptl/pthread_cond_broadcast.c (__pthread_cond_broadcast): Rewrite to
	use new algorithm.
	* nptl/pthread_cond_destroy.c (__pthread_cond_destroy): Likewise.
	* nptl/pthread_cond_init.c (__pthread_cond_init): Likewise.
	* nptl/pthread_cond_signal.c (__pthread_cond_signal): Likewise.
	* nptl/pthread_cond_wait.c (__pthread_cond_wait): Likewise.
	(__pthread_cond_timedwait): Move here from pthread_cond_timedwait.c.
	(__condvar_confirm_wakeup, __condvar_cancel_waiting,
	__condvar_cleanup_waiting, __condvar_dec_grefs,
	__pthread_cond_wait_common): New.
	(__condvar_cleanup): Remove.
	* npt/pthread_condattr_getclock.c (pthread_condattr_getclock): Adapt.
	* npt/pthread_condattr_setclock.c (pthread_condattr_setclock):
	Likewise.
	* npt/pthread_condattr_getpshared.c (pthread_condattr_getpshared):
	Likewise.
	* npt/pthread_condattr_init.c (pthread_condattr_init): Likewise.
	* nptl/tst-cond1.c: Add comment.
	* nptl/tst-cond20.c (do_test): Adapt.
	* nptl/tst-cond22.c (do_test): Likewise.
	* sysdeps/aarch64/nptl/bits/pthreadtypes.h (pthread_cond_t): Adapt
	structure.
	* sysdeps/arm/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
	* sysdeps/ia64/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
	* sysdeps/m68k/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
	* sysdeps/microblaze/nptl/bits/pthreadtypes.h (pthread_cond_t):
	Likewise.
	* sysdeps/mips/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
	* sysdeps/nios2/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
	* sysdeps/s390/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
	* sysdeps/sh/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
	* sysdeps/tile/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
	* sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h (pthread_cond_t):
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h (pthread_cond_t):
	Likewise.
	* sysdeps/x86/bits/pthreadtypes.h (pthread_cond_t): Likewise.
	* sysdeps/nptl/internaltypes.h (COND_NWAITERS_SHIFT): Remove.
	(COND_CLOCK_BITS): Adapt.
	* sysdeps/nptl/pthread.h (PTHREAD_COND_INITIALIZER): Adapt.
	* nptl/pthreadP.h (__PTHREAD_COND_CLOCK_MONOTONIC_MASK,
	__PTHREAD_COND_SHARED_MASK): New.
	* nptl/nptl-printers.py (CLOCK_IDS): Remove.
	(ConditionVariablePrinter, ConditionVariableAttributesPrinter): Adapt.
	* nptl/nptl_lock_constants.pysym: Adapt.
	* nptl/test-cond-printers.py: Adapt.
	* sysdeps/unix/sysv/linux/hppa/internaltypes.h (cond_compat_clear,
	cond_compat_check_and_clear): Adapt.
	* sysdeps/unix/sysv/linux/hppa/pthread_cond_timedwait.c: Remove file ...
	* sysdeps/unix/sysv/linux/hppa/pthread_cond_wait.c
	(__pthread_cond_timedwait): ... and move here.
	* nptl/DESIGN-condvar.txt: Remove file.
	* nptl/lowlevelcond.sym: Likewise.
	* nptl/pthread_cond_timedwait.c: Likewise.
	* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_broadcast.S: Likewise.
	* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_signal.S: Likewise.
	* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_timedwait.S: Likewise.
	* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_wait.S: Likewise.
	* sysdeps/unix/sysv/linux/i386/i586/pthread_cond_broadcast.S: Likewise.
	* sysdeps/unix/sysv/linux/i386/i586/pthread_cond_signal.S: Likewise.
	* sysdeps/unix/sysv/linux/i386/i586/pthread_cond_timedwait.S: Likewise.
	* sysdeps/unix/sysv/linux/i386/i586/pthread_cond_wait.S: Likewise.
	* sysdeps/unix/sysv/linux/i386/i686/pthread_cond_broadcast.S: Likewise.
	* sysdeps/unix/sysv/linux/i386/i686/pthread_cond_signal.S: Likewise.
	* sysdeps/unix/sysv/linux/i386/i686/pthread_cond_timedwait.S: Likewise.
	* sysdeps/unix/sysv/linux/i386/i686/pthread_cond_wait.S: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/pthread_cond_broadcast.S: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/pthread_cond_signal.S: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S: Likewise.
 2016-12-31 14:56:47 +01:00
Dmitry V. Levin
12f1ae05c0 Fix typos in the spelling of "implementation" 
Apply the following spelling fix:
$ git grep -El 'implemetn?ation' |
  xargs sed -ri 's/implemetn?ation/implementation/g'

[BZ #19514]
* resolv/res_send.c: Fix typo in comment.
* sysdeps/i386/i386-mcount.S: Likewise.
* sysdeps/s390/s390-32/s390-mcount.S: Likewise.
* sysdeps/s390/s390-64/s390x-mcount.S: Likewise.
* sysdeps/sparc/sparc-mcount.S: Likewise.
 2016-12-27 20:13:35 +00:00
Joseph Myers
0acb8a2a85 Refactor long double information into bits/long-double.h. 
Information about whether the ABI of long double is the same as that
of double is split between bits/mathdef.h and bits/wordsize.h.

When the ABIs are the same, bits/mathdef.h defines
__NO_LONG_DOUBLE_MATH.  In addition, in the case where the same glibc
binary supports both -mlong-double-64 and -mlong-double-128,
bits/wordsize.h defines __LONG_DOUBLE_MATH_OPTIONAL, along with
__NO_LONG_DOUBLE_MATH if this particular compilation is with
-mlong-double-64.

As part of the refactoring I proposed in
<https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>, this
patch puts all that information in a single header,
bits/long-double.h.  It is included from sys/cdefs.h alongside the
include of bits/wordsize.h, so other headers generally do not need to
include bits/long-double.h directly.

Previously, various bits/mathdef.h headers and bits/wordsize.h headers
had this long double information (including implicitly in some
bits/mathdef.h headers through not having the defines present in the
default version).  After the patch, it's all in six bits/long-double.h
headers.  Furthermore, most of those new headers are not
architecture-specific.  Architectures with optional long double all
use the ldbl-opt sysdeps directory, either in the order (ldbl-64-128,
ldbl-opt, ldbl-128) or (ldbl-128ibm, ldbl-opt).  Thus a generic header
for the case where long double = double, and headers in ldbl-128,
ldbl-96 and ldbl-opt, suffices to cover every architecture except for
cases where long double properties vary between different ABIs sharing
a set of installed headers; fortunately all the ldbl-opt cases share a
single compiler-predefined macro __LONG_DOUBLE_128__ that can be used
to tell whether this compilation is -mlong-double-64 or
-mlong-double-128.

The two cases where a set of headers is shared between ABIs with
different long double properties, MIPS (o32 has long double = double,
other ABIs use ldbl-128) and SPARC (32-bit has optional long double,
64-bit has required long double), need their own bits/long-double.h
headers.

As with bits/wordsize.h, multiple-include protection for this header
is generally implicit through the include guards on sys/cdefs.h, and
multiple inclusion is harmless in any case.  There is one subtlety:
the header must not define __LONG_DOUBLE_MATH_OPTIONAL if
__NO_LONG_DOUBLE_MATH was defined before its inclusion, because doing
so breaks how sysdeps/ieee754/ldbl-opt/nldbl-compat.h defines
__NO_LONG_DOUBLE_MATH itself before including system headers.  Subject
to keeping that working, it would be reasonable to move these macros
from defined/undefined #ifdef to always-defined 1/0 #if semantics, but
this patch does not attempt to do so, just rearranges where the macros
are defined.

After this patch, the only use of bits/mathdef.h is the alpha one for
modifying complex function ABIs for old GCC.  Thus, all versions of
the header other than the default and alpha versions are removed, as
is the include from math.h.

Tested for x86_64 and x86.  Also did compilation-only testing with
build-many-glibcs.py.

	* bits/long-double.h: New file.
	* sysdeps/ieee754/ldbl-128/bits/long-double.h: Likewise.
	* sysdeps/ieee754/ldbl-96/bits/long-double.h: Likewise.
	* sysdeps/ieee754/ldbl-opt/bits/long-double.h: Likewise.
	* sysdeps/mips/bits/long-double.h: Likewise.
	* sysdeps/unix/sysv/linux/sparc/bits/long-double.h: Likewise.
	* math/Makefile (headers): Add bits/long-double.h.
	* misc/sys/cdefs.h: Include <bits/long-double.h>.
	* stdlib/strtold.c: Include <bits/long-double.h> instead of
	<bits/wordsize.h>.
	* bits/mathdef.h [!_COMPLEX_H]: Do not allow inclusion.
	[!__NO_LONG_DOUBLE_MATH]: Remove conditional code.
	* math/math.h: Do not include <bits/mathdef.h>.
	* sysdeps/aarch64/bits/mathdef.h: Remove file.
	* sysdeps/alpha/bits/mathdef.h [!_COMPLEX_H]: Do not allow
	inclusion.
	* sysdeps/ia64/bits/mathdef.h: Remove file.
	* sysdeps/m68k/m680x0/bits/mathdef.h: Likewise.
	* sysdeps/mips/bits/mathdef.h: Likewise.
	* sysdeps/powerpc/bits/mathdef.h: Likewise.
	* sysdeps/s390/bits/mathdef.h: Likewise.
	* sysdeps/sparc/bits/mathdef.h: Likewise.
	* sysdeps/x86/bits/mathdef.h: Likewise.
	* sysdeps/s390/s390-32/bits/wordsize.h
	[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]: Remove
	conditional code.
	* sysdeps/s390/s390-64/bits/wordsize.h
	[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
	Likewise.
	* sysdeps/unix/sysv/linux/alpha/bits/wordsize.h
	[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/bits/wordsize.h
	[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
	Likewise.
	* sysdeps/unix/sysv/linux/sparc/bits/wordsize.h
	[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
	Likewise.
 2016-12-14 18:27:56 +00:00
Stefan Liebler
8068094f6e S390: Regenerate ULPs. 
Updated ulps file.

ChangeLog:

	* sysdeps/s390/fpu/libm-test-ulps: Regenerated.
 2016-12-02 12:52:36 +01:00
Joseph Myers
b2491db6c8 Refactor FP_ILOGB* out of bits/mathdef.h. 
Continuing the refactoring of bits/mathdef.h, this patch stops it
defining FP_ILOGB0 and FP_ILOGBNAN, moving the required information to
a new header bits/fp-logb.h.

There are only two possible values of each of those macros permitted
by ISO C.  TS 18661-1 adds corresponding macros for llogb, and their
values are required to correspond to those of the ilogb macros in the
obvious way.  Thus two boolean values - for which the same choices are
correct for most architectures - suffice to determine the value of all
these macros, and by defining macros for those boolean values in
bits/fp-logb.h we can then define the public FP_* macros in math.h and
avoid the present duplication of the associated feature test macro
logic.

This patch duly moves to bits/fp-logb.h defining __FP_LOGB0_IS_MIN and
__FP_LOGBNAN_IS_MIN.  Default definitions of those to 0 are correct
for both architectures, while ia64, m68k and x86 get their own
versions of bits/fp-logb.h to reflect their use of values different
from the defaults.

The patch renders many copies of bits/mathdef.h trivial (needed only
to avoid the default __NO_LONG_DOUBLE_MATH).  I'll revise
<https://sourceware.org/ml/libc-alpha/2016-11/msg00865.html>
accordingly so that it removes all bits/mathdef.h headers except the
default one and the alpha one, and arranges for the header to be
included only by complex.h as the only remaining use at that point
will be for the alpha ABI issues there.

Tested for x86_64 and x86.  Also did compile-only testing with
build-many-glibcs.py (using glibc sources from before the commit that
introduced many build failures with undefined __GI___sigsetjmp).

	* bits/fp-logb.h: New file.
	* sysdeps/ia64/bits/fp-logb.h: Likewise.
	* sysdeps/m68k/m680x0/bits/fp-logb.h: Likewise.
	* sysdeps/x86/bits/fp-logb.h: Likewise.
	* math/Makefile (headers): Add bits/fp-logb.h.
	* math/math.h: Include <bits/fp-logb.h>.
	[__USE_ISOC99] (FP_ILOGB0): Define based on __FP_LOGB0_IS_MIN.
	[__USE_ISOC99] (FP_ILOGBNAN): Define based on __FP_LOGBNAN_IS_MIN.
	* bits/mathdef.h (FP_ILOGB0): Remove.
	(FP_ILOGBNAN): Likewise.
	* sysdeps/aarch64/bits/mathdef.h (FP_ILOGB0): Likewise.
	(FP_ILOGBNAN): Likewise.
	* sysdeps/alpha/bits/mathdef.h (FP_ILOGB0): Likewise.
	(FP_ILOGBNAN): Likewise.
	* sysdeps/ia64/bits/mathdef.h (FP_ILOGB0): Likewise.
	(FP_ILOGBNAN): Likewise.
	* sysdeps/m68k/m680x0/bits/mathdef.h (FP_ILOGB0): Likewise.
	(FP_ILOGBNAN): Likewise.
	* sysdeps/mips/bits/mathdef.h (FP_ILOGB0): Likewise.
	(FP_ILOGBNAN): Likewise.
	* sysdeps/powerpc/bits/mathdef.h (FP_ILOGB0): Likewise.
	(FP_ILOGBNAN): Likewise.
	* sysdeps/s390/bits/mathdef.h (FP_ILOGB0): Likewise.
	(FP_ILOGBNAN): Likewise.
	* sysdeps/sparc/bits/mathdef.h (FP_ILOGB0): Likewise.
	(FP_ILOGBNAN): Likewise.
	* sysdeps/x86/bits/mathdef.h (FP_ILOGB0): Likewise.
	(FP_ILOGBNAN): Likewise.
 2016-12-01 02:56:55 +00:00
Adhemerval Zanella
c579f48edb Remove cached PID/TID in clone 
This patch remove the PID cache and usage in current GLIBC code.  Current
usage is mainly used a performance optimization to avoid the syscall,
however it adds some issues:

  - The exposed clone syscall will try to set pid/tid to make the new
    thread somewhat compatible with current GLIBC assumptions.  This cause
    a set of issue with new workloads and usecases (such as BZ#17214 and
    [1]) as well for new internal usage of clone to optimize other algorithms
    (such as clone plus CLONE_VM for posix_spawn, BZ#19957).

  - The caching complexity also added some bugs in the past [2] [3] and
    requires more effort of each port to handle such requirements (for
    both clone and vfork implementation).

  - Caching performance gain in mainly on getpid and some specific
    code paths.  The getpid performance leverage is questionable [4],
    either by the idea of getpid being a hotspot as for the getpid
    implementation itself (if it is indeed a justifiable hotspot a
    vDSO symbol could let to a much more simpler solution).

    Other usage is mainly for non usual code paths, such as pthread
    cancellation signal and handling.

For thread creation (on stack allocation) the code simplification in fact
adds some performance gain due the no need of transverse the stack cache
and invalidate each element pid.

Other thread usages will require a direct getpid syscall, such as
cancellation/setxid signal, thread cancellation, thread fail path (at
create_thread), and thread signal (pthread_kill and pthread_sigqueue).
However these are hardly usual hotspots and I think adding a syscall is
justifiable.

It also simplifies both the clone and vfork arch-specific implementation.
And by review each fork implementation there are some discrepancies that
this patch also solves:

  - microblaze clone/vfork does not set/reset the pid/tid field
  - hppa uses the default vfork implementation that fallback to fork.
    Since vfork is deprecated I do not think we should bother with it.

The patch also removes the TID caching in clone. My understanding for
such semantic is try provide some pthread usage after a user program
issue clone directly (as done by thread creation with CLONE_PARENT_SETTID
and pthread tid member).  However, as stated before in multiple discussions
threads, GLIBC provides clone syscalls without further supporting all this
semantics.

I ran a full make check on x86_64, x32, i686, armhf, aarch64, and powerpc64le.
For sparc32, sparc64, and mips I ran the basic fork and vfork tests from
posix/ folder (on a qemu system).  So it would require further testing
on alpha, hppa, ia64, m68k, nios2, s390, sh, and tile (I excluded microblaze
because it is already implementing the patch semantic regarding clone/vfork).

[1] https://codereview.chromium.org/800183004/
[2] https://sourceware.org/ml/libc-alpha/2006-07/msg00123.html
[3] https://sourceware.org/bugzilla/show_bug.cgi?id=15368
[4] http://yarchive.net/comp/linux/getpid_caching.html

	* sysdeps/nptl/fork.c (__libc_fork): Remove pid cache setting.
	* nptl/allocatestack.c (allocate_stack): Likewise.
	(__reclaim_stacks): Likewise.
	(setxid_signal_thread): Obtain pid through syscall.
	* nptl/nptl-init.c (sigcancel_handler): Likewise.
	(sighandle_setxid): Likewise.
	* nptl/pthread_cancel.c (pthread_cancel): Likewise.
	* sysdeps/unix/sysv/linux/pthread_kill.c (__pthread_kill): Likewise.
	* sysdeps/unix/sysv/linux/pthread_sigqueue.c (pthread_sigqueue):
	Likewise.
	* sysdeps/unix/sysv/linux/createthread.c (create_thread): Likewise.
	* sysdeps/unix/sysv/linux/getpid.c: Remove file.
	* nptl/descr.h (struct pthread): Change comment about pid value.
	* nptl/pthread_getattr_np.c (pthread_getattr_np): Remove thread
	pid assert.
	* sysdeps/unix/sysv/linux/pthread-pids.h (__pthread_initialize_pids):
	Do not set pid value.
	* nptl_db/td_ta_thr_iter.c (iterate_thread_list): Remove thread
	pid cache check.
	* nptl_db/td_thr_validate.c (td_thr_validate): Likewise.
	* sysdeps/aarch64/nptl/tcb-offsets.sym: Remove pid offset.
	* sysdeps/alpha/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/arm/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/hppa/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/i386/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/ia64/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/m68k/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/microblaze/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/mips/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/nios2/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/powerpc/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/s390/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/sh/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/sparc/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/tile/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/x86_64/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/unix/sysv/linux/aarch64/clone.S: Remove pid and tid caching.
	* sysdeps/unix/sysv/linux/alpha/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/arm/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/hppa/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/i386/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/ia64/clone2.S: Likewise.
	* sysdeps/unix/sysv/linux/mips/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/nios2/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/sh/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/tile/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/aarch64/vfork.S: Remove pid set and reset.
	* sysdeps/unix/sysv/linux/alpha/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/arm/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/i386/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/ia64/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/m68k/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/m68k/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/mips/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/nios2/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/sh/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/tile/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/tst-clone2.c (f): Remove direct pthread
	struct access.
	(clone_test): Remove function.
	(do_test): Rewrite to take in consideration pid is not cached anymore.
 2016-11-24 19:38:51 -02:00
Joseph Myers
93eb85ceb2 Refactor float_t, double_t information into bits/flt-eval-method.h. 
At present, definitions of float_t and double_t are split among many
bits/mathdef.h headers.

For all but three architectures, these types are float and double.
Furthermore, if you assume __FLT_EVAL_METHOD__ to be defined, that
provides a more generic way of determining the correct values of these
typedefs.  Defining these typedefs more generally based on
__FLT_EVAL_METHOD__ was previously proposed by Paul Eggert in
<https://sourceware.org/ml/libc-alpha/2012-02/msg00002.html>.

This patch refactors things in the way I proposed in
<https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>.  A new
header bits/flt-eval-method.h defines a single macro,
__GLIBC_FLT_EVAL_METHOD, which is then used by math.h to define
float_t and double_t.  The default is based on __FLT_EVAL_METHOD__
(although actually a default to 0 would have the same effect for
current ports, because ports where values other than 0 or 16 are
possible all have their own headers).

To avoid changing the existing semantics in any case, including for
compilers not defining __FLT_EVAL_METHOD__, architecture-specific
files are then added for m68k, s390, x86 which replicate the existing
semantics.  At least with __FLT_EVAL_METHOD__ values possible with
GCC, there should be no change to the choices of float_t and double_t
for any supported configuration.

Architecture maintainer notes:

* m68k: sysdeps/m68k/m680x0/bits/flt-eval-method.h always defines
  __GLIBC_FLT_EVAL_METHOD to 2 to replicate the existing logic.  But
  actually GCC defines __FLT_EVAL_METHOD__ to 0 if TARGET_68040.  It
  might make sense to make the header prefer to base things on
  __FLT_EVAL_METHOD__ if defined, like the x86 version, and so make
  the choices of these types more accurate (with a NEWS entry as for
  the other changes to these types on particular architectures).

* s390: sysdeps/s390/bits/flt-eval-method.h always defines
  __GLIBC_FLT_EVAL_METHOD to 1 to replicate the existing logic.  As
  previously discussed, it might make sense in coordination with GCC
  to eliminate the historic mistake, avoid excess precision in the
  -fexcess-precision=standard case and make the typedefs match (with a
  NEWS entry, again).

Tested for x86-64 and x86.  Also did compilation-only testing with
build-many-glibcs.py.

	* bits/flt-eval-method.h: New file.
	* sysdeps/m68k/m680x0/bits/flt-eval-method.h: Likewise.
	* sysdeps/s390/bits/flt-eval-method.h: Likewise.
	* sysdeps/x86/bits/flt-eval-method.h: Likewise.
	* math/Makefile (headers): Add bits/flt-eval-method.h.
	* math/math.h: Include <bits/flt-eval-method.h>.
	[__USE_ISOC99] (float_t): Define based on __GLIBC_FLT_EVAL_METHOD.
	[__USE_ISOC99] (double_t): Likewise.
	* bits/mathdef.h (float_t): Remove.
	(double_t): Likewise.
	* sysdeps/aarch64/bits/mathdef.h (float_t): Likewise.
	(double_t): Likewise.
	* sysdeps/alpha/bits/mathdef.h (float_t): Likewise.
	(double_t): Likewise.
	* sysdeps/arm/bits/mathdef.h (float_t): Likewise.
	(double_t): Likewise.
	* sysdeps/hppa/fpu/bits/mathdef.h (float_t): Likewise.
	(double_t): Likewise.
	* sysdeps/ia64/bits/mathdef.h (float_t): Likewise.
	(double_t): Likewise.
	* sysdeps/m68k/m680x0/bits/mathdef.h (float_t): Likewise.
	(double_t): Likewise.
	* sysdeps/mips/bits/mathdef.h (float_t): Likewise.
	(double_t): Likewise.
	* sysdeps/powerpc/bits/mathdef.h (float_t): Likewise.
	(double_t): Likewise.
	* sysdeps/s390/bits/mathdef.h (float_t): Likewise.
	(double_t): Likewise.
	* sysdeps/sh/sh4/bits/mathdef.h (float_t): Likewise.
	(double_t): Likewise.
	* sysdeps/sparc/bits/mathdef.h (float_t): Likewise.
	(double_t): Likewise.
	* sysdeps/tile/bits/mathdef.h (float_t): Likewise.
	(double_t): Likewise.
	* sysdeps/x86/bits/mathdef.h (float_t): Likewise.
	(double_t): Likewise.
 2016-11-24 18:44:50 +00:00
Florian Weimer
001f81ad1e s390x: Add hidden definition for __sigsetjmp 2016-11-15 15:51:01 +01:00
Florian Weimer
c74940f2a7 nptl: Document the reason why __kind in pthread_mutex_t is part of the ABI 2016-11-07 20:24:32 +01:00
Joseph Myers
799131036e Do not hardcode platform names in manual/libm-err-tab.pl (bug 14139). 
manual/libm-err-tab.pl hardcodes a list of names for particular
platforms (mapping from sysdeps directory name to friendly name for
the manual).  This goes against the principle of keeping information
about individual platforms in their corresponding sysdeps directory,
and the list is also very out-of-date regarding supported platforms
and their corresponding sysdeps directories.

This patch fixes this by adding a libm-test-ulps-name file alongside
each libm-test-ulps file.  The script then gets the friendly name from
that file, which is required to exist, so it no longer needs to allow
for the mapping being missing.

Tested for x86_64.

	[BZ #14139]
	* manual/libm-err-tab.pl (%pplatforms): Initialize to empty.
	(find_files): Obtain platform name from libm-test-ulps-name and
	store in %pplatforms.
	(canonicalize_platform): Remove.
	(print_platforms): Use $pplatforms directly.
	(by_platforms): Do not allow for platforms missing from
	%pplatforms.
	* sysdeps/aarch64/libm-test-ulps-name: New file.
	* sysdeps/alpha/fpu/libm-test-ulps-name: Likewise.
	* sysdeps/arm/libm-test-ulps-name: Likewise.
	* sysdeps/generic/libm-test-ulps-name: Likewise.
	* sysdeps/hppa/fpu/libm-test-ulps-name: Likewise.
	* sysdeps/i386/fpu/libm-test-ulps-name: Likewise.
	* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps-name: Likewise.
	* sysdeps/ia64/fpu/libm-test-ulps-name: Likewise.
	* sysdeps/m68k/coldfire/fpu/libm-test-ulps-name: Likewise.
	* sysdeps/m68k/m680x0/fpu/libm-test-ulps-name: Likewise.
	* sysdeps/microblaze/libm-test-ulps-name: Likewise.
	* sysdeps/mips/mips32/libm-test-ulps-name: Likewise.
	* sysdeps/mips/mips64/libm-test-ulps-name: Likewise.
	* sysdeps/nios2/libm-test-ulps-name: Likewise.
	* sysdeps/powerpc/fpu/libm-test-ulps-name: Likewise.
	* sysdeps/powerpc/nofpu/libm-test-ulps-name: Likewise.
	* sysdeps/s390/fpu/libm-test-ulps-name: Likewise.
	* sysdeps/sh/libm-test-ulps-name: Likewise.
	* sysdeps/sparc/fpu/libm-test-ulps-name: Likewise.
	* sysdeps/tile/libm-test-ulps-name: Likewise.
	* sysdeps/x86_64/fpu/libm-test-ulps-name: Likewise.
 2016-11-04 16:49:06 +00:00
Steve Ellcey
d060cd002d Define wordsize.h macros everywhere 
* bits/wordsize.h: Add documentation.
	* sysdeps/aarch64/bits/wordsize.h : New file
	* sysdeps/generic/stdint.h (PTRDIFF_MIN, PTRDIFF_MAX): Update
	definitions.
	(SIZE_MAX): Change ifdef to if in __WORDSIZE32_SIZE_ULONG check.
	* sysdeps/gnu/bits/utmp.h (__WORDSIZE_TIME64_COMPAT32): Check
	with #if instead of #ifdef.
	* sysdeps/gnu/bits/utmpx.h (__WORDSIZE_TIME64_COMPAT32): Ditto.
	* sysdeps/mips/bits/wordsize.h (__WORDSIZE32_SIZE_ULONG,
	__WORDSIZE32_PTRDIFF_LONG, __WORDSIZE_TIME64_COMPAT32):
	Add or change defines.
	* sysdeps/powerpc/powerpc32/bits/wordsize.h: Likewise.
	* sysdeps/powerpc/powerpc64/bits/wordsize.h: Likewise.
	* sysdeps/s390/s390-32/bits/wordsize.h: Likewise.
	* sysdeps/s390/s390-64/bits/wordsize.h: Likewise.
	* sysdeps/sparc/sparc32/bits/wordsize.h: Likewise.
	* sysdeps/sparc/sparc64/bits/wordsize.h: Likewise.
	* sysdeps/tile/tilegx/bits/wordsize.h: Likewise.
	* sysdeps/tile/tilepro/bits/wordsize.h: Likewise.
	* sysdeps/unix/sysv/linux/alpha/bits/wordsize.h: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/bits/wordsize.h: Likewise.
	* sysdeps/unix/sysv/linux/sparc/bits/wordsize.h: Likewise.
	* sysdeps/wordsize-32/bits/wordsize.h: Likewise.
	* sysdeps/wordsize-64/bits/wordsize.h: Likewise.
	* sysdeps/x86/bits/wordsize.h: Likewise.
 2016-11-04 09:37:44 -07:00
Stefan Liebler
8e36adc08e S390: Fix fp comparison not raising FE_INVALID. 
As gcc is using unordered comparison instructions which do not
raise invalid exception if any operand is quiet NAN,
FIX_COMPARE_INVALID is defined to 1.
Thus iseqsig is calling feraiseexcept as workaround.
 2016-10-17 10:37:11 +02:00
Stefan Liebler
18d6c45e12 s390: Refactor ifunc resolvers due to false debuginfo. 
This patch adjusts the s390 specific ifunc helper macros in ifunc-resolve.h to
use the common __ifunc macro, which uses gcc attribute ifunc to get rid of the
false debuginfo. Therefore the redirection construct is applied where needed.

Perhaps in future we can switch some of the internal symbols __GI_* from the
fallback variant to the ifunc function. But this change is not
straightforward due to a segmentation fault while linking libc.so with older
binutils on s390.

ChangeLog:

	[BZ #20478]
	* sysdeps/s390/multiarch/ifunc-resolve.h
	(s390_vx_libc_ifunc2, s390_libc_ifunc): Use __ifunc from libc-symbols.h
	to create ifunc symbols.
	(s390_vx_libc_ifunc_init, s390_vx_libc_ifunc_redirected
	, s390_vx_libc_ifunc2_redirected, s390_libc_ifunc_init): New define.
	* sysdeps/s390/multiarch/memchr.c: Redirect ifunced function in header
	for using it as type for ifunc function.
	* sysdeps/s390/multiarch/mempcpy.c: Likewise.
	* sysdeps/s390/multiarch/rawmemchr.c: Likewise.
	* sysdeps/s390/multiarch/stpcpy.c: Likewise.
	* sysdeps/s390/multiarch/stpncpy.c: Likewise.
	* sysdeps/s390/multiarch/strcat.c: Likewise.
	* sysdeps/s390/multiarch/strchr.c: Likewise.
	* sysdeps/s390/multiarch/strcmp.c: Likewise.
	* sysdeps/s390/multiarch/strcpy.c: Likewise.
	* sysdeps/s390/multiarch/strcspn.c: Likewise.
	* sysdeps/s390/multiarch/strlen.c: Likewise.
	* sysdeps/s390/multiarch/strncmp.c: Likewise.
	* sysdeps/s390/multiarch/strncpy.c: Likewise.
	* sysdeps/s390/multiarch/strnlen.c: Likewise.
	* sysdeps/s390/multiarch/strpbrk.c: Likewise.
	* sysdeps/s390/multiarch/strrchr.c: Likewise.
	* sysdeps/s390/multiarch/strspn.c: Likewise.
	* sysdeps/s390/multiarch/wcschr.c: Likewise.
	* sysdeps/s390/multiarch/wcscmp.c: Likewise.
	* sysdeps/s390/multiarch/wcspbrk.c: Likewise.
	* sysdeps/s390/multiarch/wcsspn.c: Likewise.
	* sysdeps/s390/multiarch/wmemchr.c: Likewise.
	* sysdeps/s390/multiarch/wmemset.c: Likewise.
	* sysdeps/s390/s390-32/multiarch/memcmp.c: Likewise.
	* sysdeps/s390/s390-32/multiarch/memcpy.c: Likewise.
	* sysdeps/s390/s390-32/multiarch/memset.c: Likewise.
	* sysdeps/s390/s390-64/multiarch/memcmp.c: Likewise.
	* sysdeps/s390/s390-64/multiarch/memcpy.c: Likewise.
	* sysdeps/s390/s390-64/multiarch/memset.c: Likewise.
 2016-10-07 10:11:21 +02:00
Stefan Liebler
7125ad021d S390: Regenerate ULPs 
Regenerated ulps file after recent commit "Use __builtin_fma more in dbl-64 code.".

ChangeLog:

    * sysdeps/s390/fpu/libm-test-ulps: Regenerated.
 2016-10-04 15:27:40 +02:00
Florian Weimer
a0a9b6e376 Remove the ptw-% patterns 
Nothing depends on the PTW macro anymore, so the mechanism to define
PTW for recompliations of libc routines is no longer needed.  The
source files are still recompiled for the nptl directory, just without
the “ptw-” prefix.

(Reducing the number of pattern rules in sysd-rules is critical for
improving make performance.)
 2016-09-14 16:02:06 +02:00
Joseph Myers
86bb437d6a Add femode_t functions: s390. 
This patch adds S/390 versions of fegetmode and fesetmode.  Untested.

	* sysdeps/s390/fpu/fegetmode.c: New file.
	* sysdeps/s390/fpu/fesetmode.c: Likewise.
 2016-09-07 16:47:30 +00:00
Joseph Myers
ec94343f59 Add femode_t functions. 
TS 18661-1 defines a type femode_t to represent the set of dynamic
floating-point control modes (such as the rounding mode and trap
enablement modes), and functions fegetmode and fesetmode to manipulate
those modes (without affecting other state such as the raised
exception flags) and a corresponding macro FE_DFL_MODE.

This patch series implements those interfaces for glibc.  This first
patch adds the architecture-independent pieces, the x86 and x86_64
implementations, and the <bits/fenv.h> and ABI baseline updates for
all architectures so glibc keeps building and passing the ABI tests on
all architectures.  Subsequent patches add the fegetmode and fesetmode
implementations for other architectures.

femode_t is generally an integer type - the same type as fenv_t, or as
the single element of fenv_t where fenv_t is a structure containing a
single integer (or the single relevant element, where it has elements
for both status and control registers) - except where architecture
properties or consistency with the fenv_t implementation indicate
otherwise.  FE_DFL_MODE follows FE_DFL_ENV in whether it's a magic
pointer value (-1 cast to const femode_t *), a value that can be
distinguished from valid pointers by its high bits but otherwise
contains a representation of the desired register contents, or a
pointer to a constant variable (the powerpc case; __fe_dfl_mode is
added as an exported constant object, an alias to __fe_dfl_env).

Note that where architectures (that share a register between control
and status bits) gain definitions of new floating-point control or
status bits in future, the implementations of fesetmode for those
architectures may need updating (depending on whether the new bits are
control or status bits and what the implementation does with
previously unknown bits), just like existing implementations of
<fenv.h> functions that take care not to touch reserved bits may need
updating when the set of reserved bits changes.  (As any new bits are
outside the scope of ISO C, that's just a quality-of-implementation
issue for supporting them, not a conformance issue.)

As with fenv_t, femode_t should properly include any software DFP
rounding mode (and for both fenv_t and femode_t I'd consider that
fragment of DFP support appropriate for inclusion in glibc even in the
absence of the rest of libdfp; hardware DFP rounding modes should
already be included if the definitions of which bits are status /
control bits are correct).

Tested for x86_64, x86, mips64 (hard float, and soft float to test the
fallback version), arm (hard float) and powerpc (hard float, soft
float and e500).  Other architecture versions are untested.

	* math/fegetmode.c: New file.
	* math/fesetmode.c: Likewise.
	* sysdeps/i386/fpu/fegetmode.c: Likewise.
	* sysdeps/i386/fpu/fesetmode.c: Likewise.
	* sysdeps/x86_64/fpu/fegetmode.c: Likewise.
	* sysdeps/x86_64/fpu/fesetmode.c: Likewise.
	* math/fenv.h: Update comment on inclusion of <bits/fenv.h>.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (fegetmode): New function
	declaration.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetmode): Likewise.
	* bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New
	typedef.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
	* sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(femode_t): New typedef.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
	* sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(femode_t): New typedef.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
	* sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(femode_t): New typedef.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
	* sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(femode_t): New typedef.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
	* sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(femode_t): New typedef.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
	* sysdeps/m68k/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(femode_t): New typedef.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
	* sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(femode_t): New typedef.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
	* sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(femode_t): New typedef.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
	* sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(femode_t): New typedef.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
	* sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(femode_t): New typedef.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (__fe_dfl_mode): New variable
	declaration.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
	* sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(femode_t): New typedef.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
	* sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(femode_t): New typedef.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
	* sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(femode_t): New typedef.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
	* sysdeps/tile/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(femode_t): New typedef.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
	* sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(femode_t): New typedef.
	[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
	* manual/arith.texi (FE_DFL_MODE): Document macro.
	(fegetmode): Document function.
	(fesetmode): Likewise.
	* math/Versions (fegetmode): New libm symbol at version
	GLIBC_2.25.
	(fesetmode): Likewise.
	* math/Makefile (libm-support): Add fegetmode and fesetmode.
	(tests): Add test-femode and test-femode-traps.
	* math/test-femode-traps.c: New file.
	* math/test-femode.c: Likewise.
	* sysdeps/powerpc/fpu/fenv_const.c (__fe_dfl_mode): Declare as
	alias for __fe_dfl_env.
	* sysdeps/powerpc/nofpu/fenv_const.c (__fe_dfl_mode): Likewise.
	* sysdeps/powerpc/powerpc32/e500/nofpu/fenv_const.c
	(__fe_dfl_mode): Likewise.
	* sysdeps/powerpc/Versions (__fe_dfl_mode): New libm symbol at
	version GLIBC_2.25.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-09-07 16:40:09 +00:00
Stefan Liebler
e9b424881a S390: Do not set FE_INEXACT with feraiseexcept (FE_OWERFLOW|FE_UNDERFLOW). 
On s390 feraiseexcept (FE_OVERFLOW|FE_UNDERFLOW) sets FE_INEXACT, too.
This patch uses z196 zarch load rounded instruction which can suppress
FE_INEXACT exception if gcc has z196 support in used configuration.
Otherwise FE_INEXACT flag is set as before. The gcc support is tested
in a new configure-check.

A comment in fsetexcptflg.c is corrected as new exceptions are not
executed with the next floating-point instruction if fpc is set with
_FPU_SETCW macro. It seems the comment was copied e.g. from
sysdeps/x86_64/fpu/fsetexcptflg.c file.

ChangeLog:

	* config.h.in (HAVE_S390_MIN_Z196_ZARCH_ASM_SUPPORT):
	New undefine.
	* sysdeps/s390/configure.ac: Add test for z196 zarch support.
	* sysdeps/s390/configure: Regenerated.
	* sysdeps/s390/fpu/fraiseexcpt.c (__feraiseexcept): Use ledbra
	instruction for raising over-/underflow if z196 zarch is supported
	by default.
	* sysdeps/s390/fpu/fsetexcptflg.c (fesetexceptflag):
	Correct comment.
 2016-08-31 14:54:55 +02:00
Joseph Myers
780257d48d Add fetestexceptflag. 
TS 18661-1 defines an fetestexceptflag function to test the exception
state saved in an fexcept_t object by fegetexceptflag.

This patch implements this function for glibc.  Almost all
architectures save exception state in such a way that it can be
directly ANDed with exception flag bits, so rather than having lots of
fetestexceptflag implementations that all do the same thing, the math/
implementation is made to use this generic logic (which is also OK in
the fallback case where FE_ALL_EXCEPT is zero).  The only architecture
that seems to need anything different is s390.

(fegetexceptflag and fesetexceptflag use abbreviated filenames
fgetexcptflg.c and fsetexcptflg.c.  Because we are no longer concerned
by 14-character filename limits, fetestexceptflag uses the obvious
filename fetestexceptflag.c.)

The NEWS entry is intended to be expanded along the lines given in
<https://sourceware.org/ml/libc-alpha/2016-08/msg00356.html> when
fegetmode and fesetmode are added.

Tested for x86_64, x86, mips64 and powerpc.

	* math/fetestexceptflag.c: New file.
	* sysdeps/s390/fpu/fetestexceptflag.c: Likewise.  Comment by
	Stefan Liebler.
	* math/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
	(fetestexceptflag): New function declaration.
	* manual/arith.texi (fetestexceptflag): Document function.
	* math/Versions (fetestexceptflag): New libm symbol at version
	GLIBC_2.25.
	* math/Makefile (libm-support): Add fetestexceptflag.
	(tests): Add test-fetestexceptflag.
	* math/test-fetestexceptflag.c: New file.
	* sysdeps/nacl/libm.abilist: Update.
	* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
	Likewise.
	* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
 2016-08-29 11:47:21 +00:00
Florian Weimer
d9067fca40 Do not override objects in libc.a in other static libraries [BZ #20452] 
With this change, we no longer add sysdep.o and similar objects which
are present in libc.a to other static libraries.
 2016-08-17 14:57:01 +02:00