Windows WM handles AeroSnap for normal windows on keydown. We did this
on keyup only because we do not get a keydown message, even if Windows WM
does nothing with a combination. However, in some specific cases it DOES
do something - and we have no way to detect that. Specifically, winkey+downarrow
causes maximized window to be restored by WM, and GDK fails to detect that. Then
GDK gets a keyup message, figures that winkey+downarrow was pressed and released,
and handles the combination - by minimizing the window.
To overcome this, install a low-level keyboard hook (high-level ones have
the same problem as normal message loop - they don't get messages when
Windows WM handles combinations) and use it to detect interesting key combinations
before Windows WM has a chance to block them from being processed.
Once an interesting combination is detected, post a message to the window, which
will be handled in due order.
It should be noted that this code handles key repetitions in a very crude manner.
The downside is that AeroSnap will not work if hook installation function call fails.
Also, this is a global hook, and if the hook procedure does something wrong, bad things
can happen.
https://bugzilla.gnome.org/show_bug.cgi?id=776031
Instead of using some kind of flawed logic about modifying a keypress result
when CapsLock is toggled, just add a CapsLock shift level (and all derived
shift levels, i.e. Shift+CapsLock and CapsLock+AltGr and Shift+CapsLock+AltGr)
and query Windows keyboard layout API about the result of keypresses involving
CapsLock.
Keysym table is going to be (roughly) twice as large now, but CapsLock'ed
keypresses will give correct results for some keyboard layouts (such as
Czech keyboard layout, which without this change produces lowercase letters
for CapsLock->[0,2,3,4...] instead of uppercase ones).
Keymap update time also increases accordingly.
https://bugzilla.gnome.org/show_bug.cgi?id=165385
Instead of checking for window state and giving it extra styles that
fit, just give it all styles that it is missing. It turned out that
otherwise it is impossible to, for example, restore a maximized window
via sysmenu. Also, be more flexible towards GDK/WM window state mismatches
and consider the window minimized/maximized if *either* GDK or WM thinks so.
https://bugzilla.gnome.org/show_bug.cgi?id=776485
Just set check_for_dpi_awareness = TRUE and eventually it will be handled
correctly, even if setDpiAwareFunc() returns E_ACCESSDENIED or shcore functions
are NULL.
https://bugzilla.gnome.org/show_bug.cgi?id=777031
When primary monitor is smaller than the actual monitor on which the
window is being maximized, the WM will do widnow size adjustments
that will completely screw the window size if we try to make it
smaller than 100% fullscreen (to account for taskbar size, for example).
Fix this by overriding maximized window size during WM_WINDOWPOSCHANGING.
https://bugzilla.gnome.org/show_bug.cgi?id=775808
Ensure that things build again, and instead use the Windows API to
acquire the screen dimensions (note: this may need to be scaled for
HiDPI, but since I do not own a WinTab-based device, I will need to
keep the dimensions as-is for now).
Also update the gdkdnd-win32.c code to use formats rather than targets.
https://bugzilla.gnome.org/show_bug.cgi?id=773299
Instead, turn the functions into backend API:
gdk_broadway_display_add_selection_targets()
gdk_broadway_display_clear_selection_targets()
Remove the old per-backend functions, too.
Like the X11 and Wayland backends, re-work how the cursors are being
handled. So, we use a hash table to cache up the HCURSORS that we
create along the way.
We still need to cache up the icon/cursor themes since this is something
that is not part of Windows but was added on to support icon/cursor themes
such as Adwaita on Windows, but should be in-line with what is going on in
GdkCursor.
Also, remove the _gdk_grab_cursor global variable in gdkprivate-win32.h,
and replace it with another variable in the GdkWin32Display structure,
to make things cleaner in the process.
https://bugzilla.gnome.org/show_bug.cgi?id=773299
Since on Windows we need to use a good amount of temporary GL contexts,
we need to switch back to the original GL contexts we were using when
we are done with the temporary GL contexts, otherwise multi-GL windows
will cause confusions causing display artifacts and crashes.
Also, use the GdkWin32GLContext::gl_hdc consistently throughout
the code and remove the GdkWin32Display::gl_hdc as Lukas K pointed out
that GdkWin32Display::gl_hdc becomes out-of-date and so the HDC that the
GL context is bound to becomes incorrect in sceanarios using multiple
windows with GtkGLArea/GdkGLArea items (which would cause the artifacts in
programs that use multiple windows with GtkGLArea/GdkGLArea items, and it
turns out that GdkWin32Display::gl_hdc is actually not necessary to help
keep track of the HDCs we use for our GL contexts.
This will also fix on Windows with GDK_GL=always, or when GSK's gl
renderer is used.
Partly based on patch from Lukas K <lu@0x83.eu>
https://bugzilla.gnome.org/show_bug.cgi?id=789213
Move the leftovers from the removals to use the current APIs, to fix the
build. Also for gdk_device_virtual_set_window_cursor(), only do
something when a valid GdkCursor is passed in here.
https://bugzilla.gnome.org/show_bug.cgi?id=773299
The preferred api to create cursors is by name, and the
GdkCursorType enumeration can directly trace its ancestry
to the horrible X cursor font. So lets stop using it.
Drop the screen argument from gdk_dnd_find_window_for_screen
and rename the function to gdk_dnd_find_window. The screen
argument does not add anything here since the drag context
is already tied to the display. Update all backends, and
update all callers.
Implement GdkDisplay->get_setting() using the existing
_gdk_win32_screen_get_setting() and get rid of GdkScreen->get_setting()
as a result, to follow the changes in GDK.
Also, since we don't emit settings events in the Windows GDK backend,
but we acquire settings to print using GDK_SETTING, drop all references
related to GDK_SETTING since that is now removed. Update the debug
strings that are print out as a result
(gdk_screen_get_setting->gdk_display_get_setting).
https://bugzilla.gnome.org/show_bug.cgi?id=773299
The list of surfaces passed into the function may be NULL, so don't try
to initialize the surfaces if it is so, to avoid a crash.
Also, remove the cast to GdkPixbuf* for getting surfaces->data, as we
are already using a cairo_surface_t*.
https://bugzilla.gnome.org/show_bug?id=773299
Those should be interpreted by widget-local gestures, not guessed at a
high level with no notions of the specific context. Users will want
GtkGestureMultiPress to replace these events.
Interpret NULL as "root window" here - we only have one
screen nowadays, so there is no choice involved, and this
will let us avoid dealing with the root window in the
fontend code.
It was suggested that the project files to be moved to win32/, so that we can
have one less layer of directories we need to go down into to reach the project files.
This adds support to the GDK Win32 backend so that we can support Vulkan
context creation for use in the GSK Vulkan renderer, so that we can test
it on Windows platforms as well.
https://bugzilla.gnome.org/show_bug.cgi?id=776544
Fix the build after the branch wip/alexl/simplify-gdkwindow was merged, as
there are some changes that broke things in the Windows backend, namely:
-gdk_win32_input_shape_combine_region() should not be removed at this
point (though it is a stub--otherwise GDK/Win32 will crash)
-Some more code need to be removed due to the removal of items in the
above-mentioned merged branch
Also, like the X11 backend, do not allow the creation of native child
windows, and stop checking for subsequent child windows
(GDK_WINDOW_CHILD), so that we can clean things up a bit.
https://bugzilla.gnome.org/show_bug.cgi?id=773299
We're not currently using this, and dropping it allows us to loose
a bunch of code which leads us towards the goal of having GdkWindow
only for toplevels (and reparenting makes not sense for toplevels).
We can't really support these on e.g. wayland anyway, and we're trying
to get rid of subwindow at totally in the long term, so lets drop this.
It allows us to drop a lot of complexity.
There were some parts that need some updates after the refactoring in
GDKGL, so that the code will continue to build and run.
For gdkwindow-win32.c, comment out the parts where we check for use_gl
(which was removed), since we are going to move all drawing to OpenGL,
but don't remove/disable the whole portion as that transition is not
complete at this point.
There a is new GDKGL function that checks for the damaged area of the back
buffer, but since the notion of "damage" is for *NIX (GLX/EGL for
Wayland/mir), meaning that there is no such extension for Windows in this
regard, so we can't support this on Windows as-is, at least for now.
https://bugzilla.gnome.org/show_bug.cgi?id=773299
... instead of a gl context.
This requires some refactoring in the way we mark the shared context as
drawing: We now call begin_frame/end_frame() on it and ignore the call
on the main context.
Unfortunately we need to do this check in all vfuncs, which sucks. But I
haven't found a better way.
No visible changes as GL rendering is disabled at the moment.
What was done:
1. Move window->invalidate_for_new_frame to glcontext->begin_frame
This moves the code to where it is used (the GLContext) and prepares it
for being called where it is used when actually beginning to draw the
frame.
2. Get rid of buffer-age usage
We want to let the application render directly to the backbuffer.
Because of that, we cannot make any assumptions about the contents the
application renders outside the clip area.
In particular GskGLRenderer renders random stuff there but not actual
contents.
3. Pass the actual GL context
Previously, we passed the shared context to end_frame, now we pass the
actual GL context that the application uses for rendering. This is so
that the vfuncs could prepare the actual contexts for rendering (they
don't currently).
4. Simplify the code
The previous code set up the final drawing method in begin_frame.
Instead, we now just ensure the clip area is something we can render
and decide on the actual method in end_frame.
This is both more robust (we can change the clip area in between if we
want to) and less code.
Only attempt to initialize Wintab after the display manager announces
that the first default display has been set. Fixes a segfault during
initialization of specific tablet drivers' wintab32.dlls. Add assertions
and verbose comments explaining this nonsense because this stuff is a
pain to have to keep fixing.
https://bugzilla.gnome.org/show_bug.cgi?id=774379
Move the orientation sanity-checks into the packet decode func.
Rationale: the packet handling func may otherwise read beyond the end of
device->last_axis_data.
Also expand them to cope with my test Huion's weird reporting.
Also correct the azimuth angle to align with GDK's presentation.
Most importantly, fix annoying comment typo.
https://bugzilla.gnome.org/show_bug.cgi?id=774265
Fix a regression introduced in 4ce6d10601
which causes devices with an odd-numbered zero-based index in the list
to be passed over incorrectly. This might present as yet another "device
does not send pressure" bug for ~50% of devices out there.
This commit also closes off another potential segfault for wintab_devices
lists which have an odd length.
https://bugzilla.gnome.org/show_bug.cgi?id=774699
As in the last commit on gdkdisplay-win32.c, we need to define that to be
0x0600 (Vista) or later so that the items needed in the Windows headers be
activated.
See: https://bugzilla.gnome.org/show_bug.cgi?id=768081#c62
... to be for Vista (0x0600) or later. This is so that the necessary
items in the Windows headers be activated so that the code will build
properly on mingw-w64, and we already require Vista or later for GTK+.
Thanks Ting-Wei Lan for pointing this out.
See: https://bugzilla.gnome.org/show_bug.cgi?id=768081#c62
This enables HiDPI support for GTK+ on Windows, so that the
fonts and window look better on HiDPI displays. Notes for the current
work:
-The DPI awareness enabling can be disabled if and only if an application
manifest is not embedded in the app to enable DPI awareness AND a user
compatibility setting is not set to limit DPI awareness for the app, via
the envvar GDK_WIN32_DISABLE_HIDPI. The app manifest/user setting for
DPI awareness will always win against the envvar, and so the HiDPI items
will be always setup in such scenarios, unless DPI awareness is disabled.
-Both automatic detection for the scaling factor and setting the scale
factor using the GDK_SCALE envvar are supported, where the envvar takes
precedence, which will therefore disable automatic scaling when
resolution changes.
-We now default to a per-system DPI awareness model, which means that we
do not handle WM_DPICHANGED, unless one sets the
GDK_WIN32_PER_MONITOR_HIDPI envvar, where notes for it are in the
following point.
-Automatic scaling during WM_DISPLAYCHANGE is handled (DPI setting change of
current monitor) is now supported. WM_DPICHANGED is handled as well,
except that the window positioning during the change of scaling still
needs to be refined, a change in GDK itself may be required for this.
-I am unable to test the wintab items because I don't have such devices
around.
https://bugzilla.gnome.org/show_bug.cgi?id=768081
Now that the autotools build folded the GDK/GSK bits into the main GTK+
DLL, there are some updates that need to be done for this. We need to:
-Fold the DllMain() of GDK-Win32 into the main GTK+ DllMain(), as we need
the HINSTANCE to register the window. We can't have two DllMain()'s in a
single DLL.
-Remove the GDK rc(.in) files, as that is not used anymore. Make the GTK+
.rc(.in) file load the gtk.ico GTK+ logo file instead so that we still
get the GTK+ logo for the application icon by default. Update the
autotools build files as well.
-Revert commit b9f9980 as LRN pointed out in comment 25 in bug 773299, as
GTK+ is now a monolithic DLL, and we ought not to export this private
function.
https://bugzilla.gnome.org/show_bug.cgi?id=773299
Commit d249e77 (API: screen: Remove gdk_screen_is_composited()) attempted
to update the GDK-Win32 for the removal of the API, but some parts were
missed. This updates the code so that things continue to build and run.
https://bugzilla.gnome.org/show_bug.cgi?id=773299
Switch code to use gdk_display_is_composited() instead.
The new code also doesn't use a vfunc to query the property but rather
requires the backend to call set_composited()/set_rgba() to change the
value.
Update the GDKGL implementation:
-Allow legacy contexts to be created.
-Use finer-grained attributes to ask for a pixel format when possible,
which also adds support for anti-aliasing
In fact the changes here are required for GTKGL to work properly on
Windows for 4.x.
Note that creation of gles contexts is not done here, as the system does
not support such contexts directly on Windows, but only through means such
as ANGLE, which is a totally different issue here.
https://bugzilla.gnome.org/show_bug.cgi?id=773528
We now need C99 features from the compiler which are only supported by
Visual Studio 2013 and later, so drop the MSVC 2008~2012 projects, and make
the baseline supported Visual Studio version be 2013. Update the build files
as a result.
These complicate a lot of GdkWindow internals to implement features
that not a lot of apps use, and will be better achieved using gsk.
So, we just drop it all.
This updates all the projects files to be be named appropriately as we move from GTK-3.x to 4.x,
and updates the autotools files so that things are distributed and generated properly.
Also remove deprecated/gtkstatusicon-quartz.c from gtk/Makefile.am, as that was causing 'make dist'
to fail as that file has been removed.
This fixes 'make dist' with the updated existing project files in proper order.
Note that this does not include the new GSK, which will be added later, so the project files do
not yet build the whole stack on Visual Studio at this point.
And with it, gtk_widget_get_visual() and gtk_widget_set_visual() are
gone.
We now always use the RGBA visual (if available) and otherwise fall back
to the system visual.
The cursor was set using gdk_window_set_cursor() even in
gdk_window_new().
So instead of having yet another flag, just make the users of that flag
call gdk_window_set_cursor() directly after the window was created.
X11 was the only backend to support it and people can just override it
using XSetClassHint() directly.
The docs already advertised the function as "Do not use".
Keep the existing call to XSetClassHint() in place, so that we keep
setting the same values as in GTK3.
... and gdk_screen_get_window_stack().
Those functions were originally added in
5afb4f0f11 but do not seem to be used as
they are not implemented anywhere but in X.
As GDK is not meant to fulfill window management functionality I'm going
to remove these functions without replacements.
... and gdk_screen_get_width_mm() and gdk_screen_get_height_mm() and
the shortcut counterparts that call these functions on the default
screen.
Modern display servers don't provide an ability to query the size of a
screen or display so we shouldn't allow that either.
The GLib main loop blocks on MsgWaitForMultipleObjectsEx to
determine if there are any incoming messages while also allowing
for background tasks to run. If all available messages are not
processed after MsgWaitForMultipleObjectsEx has signaled that
there are available, CPU usage will skyrocket.
From my limited understanding (by inspection of profiling
under Visual Studio):
Key is pressed - MsgWaitForMultipleObjectsEx unblocks, and
sends message to GDK's event handler. Some event is now queued.
g_poll unblocks, calls the g_event_dispatch which finally
resolves to gdk_event_dispatch. This then calls
_gdk_win32_display_queue_events, but since a message is already
queued, it fails to call PeekMessage and returns immediately.
At the next iteration, g_poll again calls MsgWaitForMultipleObjectsEx
which queues yet another event and returns almost immediately, since
there are events available which haven't been processed by PeekMessage.
The dispatch function is then called and the process repeats.
https://bugzilla.gnome.org/show_bug.cgi?id=771568
Pick the W32 API for possible deadkey+<something> combinations
and prefer these to other sources of deadkey combos.
Specifically, if W32 API supports at least one combo for a particular
deadkey, only use that data and do not attempt to do other, unsupported
combinations, even if they make sense otherwise.
This is needed to, for example, correctly support US-International
keyboard layout, which produces a combined character for <' + a>
combo, but not for <' + s>, for example.
This is achieved by stashing all the deadkeys that we find in
an array, then doing extra loop through all virtual key codes and
trying to combine them with each of these deadkeys. Any combinations
that produce a single character are cached for later use.
In GTK Simple IM context, call a new GDK W32 function to do a lookup
on that cached combination table early on, among the "special cases"
(which are now partially obsolete).
A limitation of this code is that combinations with more than
one deadkey are not supported, except for combinations that consist
entirely of 2 known deadkeys. The upshot is that lookups should
be relatively fast, as deadkey array stays small and the combination
tree stays shallow.
Note that the use of ToUnicodeEx() seems suboptimal, as it should
be possible to just load a keyboard library (KBD*.DLL) manually
and obtain and use its key table directly. However, that is much more
complicated and would result in a significant rewrite of gdkkeys-win32.
The code from this commit, though hacky, is a direct addition to
existing code and should cover vast majority of the use-cases.
https://bugzilla.gnome.org/show_bug.cgi?id=569581
This changes the group/level semantic.
Previously W32 backend used "group 0/1" to denote "AltGr OFF/ON"
and "level 0/1" to denote "Shift is OFF/ON".
Now "group" means "keyboard layout" and there can be up to 255 groups,
while AltGr and Shift are combined into a single level enum that
takes values between 0 and 4.
Unlike X, W32 doesn't do effective group overriding, meaning that
it will never tell the caller that a different group was actually
used (even for universal keys, such as Enter), because key symbol
table is completely fabricated and there's no point in trying to
save a few of kilobytes of RAM by not duplicating universal key
records for all groups.
Also contains many whitespace changes (tab elimination, fixed
indentation) and cleanup (axed a few global variables, these are
now accessed via the default keymap).
https://bugzilla.gnome.org/show_bug.cgi?id=768722
WINBOOL is MinGW-specific, so change it to BOOL, which is universally
available.
Also, Visua Studio is more picky on where __stdcall (WINAPI) is placed, so
fix that to be in-sync with what is done in the other sources.
Always associate a drag context with a GdkDisplay and use that when
getting a cursor for a given action.
If we don't do this, dragging on a window that doesn't use the default
display will make us use cursors from the wrong display.
https://bugzilla.gnome.org/show_bug.cgi?id=765565
Windows save in hardware_keycode an information which is not so low
level and some application require the hardware scancode.
As Windows provides this information save it in GdkEventPrivate
and provide a function to get this information.
For no Windows system the function return the hardware_keycode instead.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=765259
MoveWindow should not be used over the pre-existing move/resize
functions, which already correctly position a window with respect
to its parent, while also taking into account the size of window
decorations.
https://bugzilla.gnome.org/show_bug.cgi?id=765100
gdk_window_reparent() already changes children list for old and new parent.
Doing so twice results in a circular reference in the list, which can hang
the application later, for example in gtk_window_show().
https://bugzilla.gnome.org/show_bug.cgi?id=764845
This makes usage of _gdk_display again when creating a window.
This is needed because there is a window created when the display
is being initialized, so it becomes a chicken and egg problem.
For now we roll back this to fix the wintab crash but we might
want to fix this again in the future by improving the wintab
initialization.
https://bugzilla.gnome.org/show_bug.cgi?id=764664
This fixes a bug that was introduced by db1b24233e.
The reason why 0:0 coordinates were passed was that SWP_NOREPOSITION was
misinterpreted as SWP_NOMOVE. That is not the case - SWP_NOREPOSITION
prevents owner Z-order change, not the window position change.
Currently only one kind of decorative window is in use - the shape
indicator that is shown when snapping windows to the edge of the screen.
When normal toplevel class is used, its window procedure expects certain
motions from GDK (passing user data to CreateWindowEx(), registering
handle in a hash map etc), and might crash if that is not done.
Dumb window doesn't require anything, it can just be.
https://bugzilla.gnome.org/show_bug.cgi?id=763013
Now halfleft/halfright/fullup snaps do hug screen edges as intended.
Documents AeroSnap behaviour when snapped windows are drag-resized
(currently this implementation handles this in a very simplistic way).
Don't believe GTK when it tells us that window shadow is 0, preserve
previous values (but do remember that GTK wants no shadow, in case
we need that).
Fixes a couple of bugs in unsnapping (check offset against the half
of the window; don't put pointer in the middle of the window vertically
if it still fits in the top half).
https://bugzilla.gnome.org/show_bug.cgi?id=763013
Implements gdk_win32_window_set_shadow_width().
Uses shadow width/height to adjust max tracking size, allowing
windows to be drag-resized to cover the whole desktop.
Also uses SM_C*VIRTUALSCREEN instead of SM_C*MAXTRACK.
https://bugzilla.gnome.org/show_bug.cgi?id=763013
Indicator is a bare layered click-through native window,
painted completely by GDK, including animation.
This commit also isolates some of the more spam-ish debug logging
under ifdef.
This commit also changes the system metric used for maximal window
height for the snapping purposes. Turns out, SM_CYMAXTRACK is way
too large, use SM_CYVIRTUALSCREEN instead.
https://bugzilla.gnome.org/show_bug.cgi?id=763013
