Replace the gdk_surface_move_to_rect() API with a new GdkSurface
method called gdk_surface_present_popup() taking a new GdkPopupLayout
object describing how they should be laid out on screen.
The layout properties provided are the same as the ones used with
gdk_surface_move_to_rect(), except they are now set up using
GdkPopupLayout.
Calling gdk_surface_present_popup() will either show the popup at the
position described using the popup layout object and a new unconstrained
size, or reposition it accordingly.
In some situations, such as when a popup is set to autohide, presenting
may immediately fail, in case the grab was not granted by the display
server.
After a successful present, the result of the layout can be queried
using the following methods:
* gdk_surface_get_position() - to get the position relative to its
parent
* gdk_surface_get_width() - to get the current width
* gdk_surface_get_height() - to get the current height
* gdk_surface_get_rect_anchor() - to get the anchor point on the anchor
rectangle the popup was effectively positioned against given
constraints defined by the environment and the layout rules provided
via GdkPopupLayout.
* gdk_surface_get_surface_anchor() - the same as the one above but for
the surface anchor.
A new signal replaces the old "moved-to-rect" one -
"popup-layout-changed". However, it is only intended to be emitted when
the layout changes implicitly by the windowing system, for example if
the monitor resolution changed, or the parent window moved.
We can map a non-grabbing popup wherever, it's just the grabbing
popup-chain that needs to be ensured not to break any ordering rules.
Fix this by managing two lists; one of open popups, and another for
grabbing ones.
Now popups surfaces are always created with the parent set, so we don't
need to implement vorious guess work to try to find what the parent
might be. Remove that code and just use GdkSurface::parent which is
where the parent set during construction ends up at.
Add event queues specifically for surface configuration events
(xdg_surface.configure, xdg_toplevel.configure, xdg_popup.configure etc)
so that a configuration can be completed without having side effects on
other surfaces. This will be used to synchronously configure specific
GdkSurfaces, as is needed by the Gtk layout mechanisms.
The freezing is conditioned on various state, so lets make the thawing a
bit more robust. Without this there was a risk that we'd thaw too many
times if there was a frame callback requested while the conditions for
the freezing were not met.
Otherwise the compositor gets all confused when it's trying to make
drag happen but we know it's not going to happen.
After all, we exchange data behind its back, we just need to keep it
informed.
These don't take a duration, instead they call g_get_monotonic_time() to
and subtract the start time for it.
Almost all our calls are like this, and this makes the callsites clearer
and avoids inlining the clock call into the call site.
When we use if (GDK_PROFILER_IS_RUNNING) this means we get an
inlined if (FALSE) when the compiler support is not compiled in, which
gets rid of all the related code completely.
We also expand to G_UNLIKELY(gdk_profiler_is_running ()) in the supported
case which might cause somewhat better code generation.
usec is the scale of the monotonic timer which is where we get almost
all the times from. The only actual source of nsec is the opengl
GPU time (but who knows what the actual resulution of that is).
Changing this to usec allows us to get rid of " * 1000" in a *lot* of
places all over the codebase, which are ugly and confusing.
Copy just enough of libwayland-cursor to make our own
loading. This lets us drop the dependency on libwayland-cursor,
and changes the startup cost for cursor theme loading
from 25ms to 0.1ms.
At the same time, simplify the handling of scaled cursors -
instead of creating an array of theme objects, just make a
single theme object provide all scaled cursor sizes.
Add marks for when we do commits, swap buffer or
receive frame events. These are the low-level start
and end points of the frame cycle, and it is useful
to see them in the profiler.
We were always adding ASK to the list of possible
actions, and preferring it. This was causing the
ask cursor to show up when both the source and
the target support ASK, even though it is only
meant to happen if you hold the Alt modifier.
Instead, use one of the supported actions as
preferred action.
When creating a new GdkDrop object on drag_enter, take pending
source_actions and action into account. The code to store the
pending actions was already there, they were just not passed
on to the drop object when we create it.
We need to set the drag to NULL in gdk_wayland_drag_drop_done,
otherwise, all future drags will be considered local after the
first local one. Worse, they will also provide the wrong data.
We use a compilation symbol in our build to allow the inclusion of
specific headers while building GTK, to avoid the need to include only
the global header.
Each namespace has its own compilation symbol because we used to have
different libraries, and strict symbol visibility between libraries;
now that we have a single library, and we can use private symbols across
namespaces while building GTK, we should have a single compilation
symbol, and simplify the build rules.
The existing xdg-shell protocols do not support minimization in a way
that allows us to implement the GdkSurface API; the only minimization
operation does not come with a state notification, nor it comes with
a way to undo itself.
Closes: #67
The "iconified" state is mostly an X11-ism; every other platform calls
this state "minimized" because it may not involve turning a window into
an icon at all.
Using gsettings for this information does not work
in sandboxed scenarios, where settings are per-app.
Since the Wayland protocol provides this information
nowadays, just drop the old code for reading
the gsettings.
The event may end up freed after delivery, ensure to keep a ref in order
to emit the matching emulated crossed event matching a proximity event.
Closes: https://gitlab.gnome.org/GNOME/gtk/issues/2157
The code managing this accounting mixed seat and tablet output lists,
can't bode well. Fixes invalid reads on list elements, as there are
dangling pointers.
Closes: https://gitlab.gnome.org/GNOME/gtk/issues/2157
This is a requirement for using VK_KHR_incremental_present.
Vulkan Wayland drivers translate the VkPresentRegionsKHR to
wl_surface.damage_buffer(), which a v4-only request.
When calling gdk_wayland_surface_export_handle(), if we pass
some 'user_data' but no 'destroy_func', GTK4 crashes. That's
because in xdg_exported_handle() we are unconditionally calling
destroy_func -- even when it's NULL.
Fix that by checking if there's a destroy function before calling
it.
Fixes https://gitlab.gnome.org/GNOME/gtk/issues/2179
The xdg_output.done event is deprecated in xdg-output v3, so clients
need to rely on the wl_output.done event instead.
However, applying the changes on the fist wl_output.event when using
xdg-output v3 may lead to an incomplete change, as following xdg-output
updates may follow.
Make sure we apply xdg-output events on wl_output.done events with
xdg-output v3.
https://gitlab.gnome.org/GNOME/gtk/issues/2128
xdg-output v3 marks xdg-output.done as deprecated and compositors are
not required to send that event anymore.
So if the xdg-output version is 3 or higher, simply set the initial
value `xdg_output_done` to TRUE so we don't wait/expect that event
from the compositor.
https://gitlab.gnome.org/GNOME/gtk/issues/2053
Windows/surface's aren't supposed to be explicitly moved by any external
part, so don't provide API for doing so. Usage throughout Gdk is
replaced by the corresponding backend variants.
To separate how toplevels and popups are configured, a first step is to
introduce a resize-only vfunc for backends to implement. It's meant to
only configure toplevel windows, i.e. popups. Currently it's used for
both types, but introducing the resize-only API is a first step.
Configuration should happen in response to the xdg_surface.configure
event, not in the events that preceeds it. Do this by making all
configured state pending until the committing "configure" event. Also
split up toplevel vs popup configuration in a more clear way.
To make a frame clock tick as long as any of the associated surfaces
expect to receive ticks, make the surfaces inhibit freezing the clock,
instead of directly tell the frame clock to freeze itself.
This makes it so that as long as any surface using a certain frame clock
is not frozen (e.g. just received a frame event from the display
server), the frame clock will not be frozen.
With this, the frame clock is initiated as frozen, and won't be thawed
until any surface inhibits freeze. It will be frozen again, when every
surface has that previously inhibited freeze uninhibited freeze.
The xdg_output v2 interface has a `name` property that reflects the
output name coming from the compositor.
This is the closest thing we can get to a connector name.
The Wayland backend has a hack to work around
a race with popover mapping: If the surface size
changes before the initial configure, we hide and
show the surface. Unfortunately, the code was doing
this in a way that is externally observable (by
listening for surface state changes), and popovers
were observing it and hiding themselves in response.
Avoid this by not going through the GDK frontend
code for this.
With separate clocks, the phases are not coordinated,
which messes with GTKs size allocation machinery treating
the entire widget tree as a whole, and causes us to
run into assertion where popups get drawn before they
are allocated.
Store popup parents separately from transient-for
parents, since these are separate concepts with
different behaviors. And we need the parent in
the frontend, so we can use it in the fallback
move-to-rect implementation.
We don't need the complicated wrapper system anymore,
since client-side windows are gone. This commit moves
all the vfuncs to GtkSurfaceClass, and changes the
backends to just derive their surface implementation
from GdkSurface.
We want to use a gdk_surface_new_popup for popups,
and align the constructor names with the surface
types, so rename
gdk_surface_new_popup -> gdk_surface_new_temp
gdk_surface_new_popup_full -> gdk_surface_new_popup
The temp surface type will disappear eventually.
All the information in it is already contained
in the surface object we pass along, and none
of the backend implementations were using the
attributes at all.
The “xdg-output” protocol provides clients with the outputs size and
position in compositor coordinates, and does not provide the output
scale which is already provided by the core “wl_output” protocol.
So when receiving the wl_output scale event, we should update the scale
regardless of “xdg-output” support, otherwise the scale will remain to
its default value of 1 and the surface will be scaled up by the
compositor to match the actual output scale, which causes blurry fonts
and widgets.
Fixes: https://gitlab.gnome.org/GNOME/gtk/issues/1901
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
The change to keep some server resources around
until destroy was causing us to not recreate
the right things when a surface is hidden and
then shown again. Make sure to recreate everything.
The Wayland backend was dropping _all_ serverside
resources on hide, which is too early e.g. for
GtkGLArea which wants to use egl resources to
unload textures on unrealize.
Closes: https://gitlab.gnome.org/GNOME/gtk/issues/1485
We were adding incomplete frame timings to the
profile, which lead to occasional nonsense
numbers. Instead, only add timings to the profile
once we marked them as complete. This also
gives us an opportunity to add the presentation
time as a marker.
Make find_grab_input_seat return a GdkWaylandSeat
instead of a struct wl_seat, so we can use it and
avoid calling gdk_display_get_default_seat when
we need to get a serial later.
Save the information whether the cursor in use is the default one, and
don't create a new cursor object in that case.
We previously created a new cursor object every frame just to compare it
to the current cursor in use and then throw it away.
The skip-taskbar, skip-pager and urgency hints were
only ever implemented for X11, and are not very useful
with modern desktops. Relegate the functionality to
x11 backend api, and drop the GtkWindow api.
And update the surface accordingly (eg. scale on hidpi). The mechanism
that did that for wl_pointer has been made generic so it can be shared
with tablets too.
Closes: https://gitlab.gnome.org/GNOME/gtk/issues/1675
_gdk_wayland_cursor_get_buffer was not initializing
its out variables in the 'not found' case. This
was showing up in protocol traces as garbage hotspots
being sent to the compositor.
Closes: https://gitlab.gnome.org/GNOME/gtk/issues/1328
Previously, the GDK backend for Wayland would deduce the logical size
of the monitors from the wl_output size and scale.
With the addition of fractional scaling which advertises a larger scale
value and then scale down the client surface, the computed logical size
of the monitors in GDK would be wrong and confuse applications which
insist on using the monitor size and position (like Firefox).
The xdg-output protocol aims at describing outputs in a way which is more
in line with the concept of an output on desktop oriented systems by
presenting the outputs using their logical size and position appropriately
transformed.
Add support for the optional xdg-output protocol so that the size and
position of the monitors as reported by GDK is correct even when using
fractional scaling.
Fixes: https://gitlab.gnome.org/GNOME/gtk/issues/1828
Change the all the begin_drag and begin_move apis in
GdkSurface and GtkWindow to expect surface coordinates.
Update the x11 implementation to translate to root
coordinates where it matters. Wayland is ignoring the
coordinates anyway.
When the user approaches a tablet tool to the screen we get a proximity-in event
and in this moment we need to check the surface output scale to find the scaling
to be applied to the cursor.
And the same should be done when the tool is detached or the monitors
configuration changes.
https://gitlab.gnome.org/GNOME/gtk/issues/1675
Some of the flags got lost in the meson transition or were demoted from
error flags to warning flags.
This commit reintroduces them.
It also includes fixes for the code that had warnings with those flags.
The big one being -Wshadow.
As per the spec:
> The back buffer can
> either be reported as invalid (has an age of 0) or it may be
> reported to contain the contents from n frames prior to the
> current frame.
So a buffer age of 1 means that the buffer was used in the last frame.
We were handling buffer_age==1 the same as buffer_age==0, i.e. we
returned the full damage for the surface.
[1] https://www.khronos.org/registry/EGL/extensions/EXT/EGL_EXT_buffer_age.txt
When we decide to fall back because the settings portal
is not present, adhere to that decision elsewhere. And
treat the fontconfig-timestamp like the other special-cased
settings, with G_TYPE_NONE.
Under Wayland, we are currently directly using GSettings
for desktop settings. But in a sandbox, we may not have
access to dconf, so this may fail. Use the new settings
portal instead.
As GSettings now supports session-specific defaults, GNOME Classic
no longer uses a separate schema and the decoration layout is always
determined by the regular schema.
This essentially reverts commit add67b516c (although the code was
moved since then).
https://gitlab.gnome.org/GNOME/gtk/merge_requests/400
Let's just use the fact that a window was mapped as a subsurface to
remap it above another transient parent instead of relying on the more
complicated 'should-map-as-subsurface' helper function.
GLib master propagates argument types in g_clear_pointer(), which causes
the usual function pointer casts to GDestroyNotify to trip compiler
warnings. Additionally, this commit changes some cleanup functions where
appropriate (wl_data_source_destroy ->
gtk_primary_selection_source_destroy for struct
gtk_primary_selection_source).
Change GdkDrag::action to GdkDrag::selected-action, which is
more clearly different from actions, and follows the existing
name of the struct field and getter.
This lets us drop the ::action-changed signal for the
property change notification. But, can just as well move
the signal class handers which just update the cursor
to the ::action setter. No need to do this in the backends.
Rename gdkdnd.h to gdkdrag.h, to go along with gdkdrop.h
This commit includes the necessary updates to the X11, Wayland
and Broadway backends. Other backends have to be updated separately.
This is to go along with the newly introduced GdkDrop.
This commit includes the necessary updates to the X11, Wayland
and Broadway backends. Other backends have to be updated separately.
Also update the cursor surfaces of every seat when an output changes
scale. This could for example happen when a monitor scale is changed via
Settings.
This functionality is similar to Linux's memfd. It creates anonymous shared memory without touching the filesystem, which allows it to work in Capsicum capability mode (sandbox).
In particular, this patch removes:
gdk_surface_get_events()
gdk_surface_set_events()
gdk_surface_get_device_events()
gdk_surface_set_device_events()
Event masks so far still exist for grabs.
Includes implementation for Wayland and X11, which are the only backends
implementing the Startup Notification Protocol, returns NULL otherwise.
https://gitlab.gnome.org/GNOME/gtk/issues/1084
Similar to what has been done recently for DESKTOP_AUTOSTART_ID [1],
we need to get rid of this call to g_unsetenv() in the displays'
backends for X11 and Wayland, so that it's guarantee to happen any
thread is created, while still being accessible when needed.
Let's stash the value of this environment variable when loading the
GDK library, and provide a private method so that it can be retrieved
from the displays' backend when implementing gdk_display_make_default().
[1] https://gitlab.gnome.org/GNOME/gtk/commit/22269902
Closes: https://gitlab.gnome.org/GNOME/gtk/issues/979
When an animated cursor was set and the previous cursor animation delay
happened to be the same, we wouldn't restart the animation timeout and
just return G_SOURCE_CONTINUE assuming the timer would continue. This
assumption is however only valid if the function was called from the
timeout, which is not the case.
Instead also arm the timer also if there is no previous timer active.
gdk_wayland_*_grab()/ungrab() would emit crossing events which translate
as focus_in/focus_out events for keyboard.
However, the ungrab() functions compare the native toplevel as this is
what gets the Wayland pointer enter/leave events with the grab surface,
so if the grab is issued on a child gdk surface, those won't match and
we would emit more focus_out events than focus_in.
This means that a widget such as spice-gtk which issues a keyboard grab
whenever the pointer enters the surface and releases the grab when it
leaves the surface would get uneven numbers of focus_in/focus_out
events.
Also, gdk_wayland_seat_ungrab() would not emit crossing events for
keyboard devices, whereas gdk_wayland_device_ungrab() does, which adds
even more potential discrepancies between focus_in/focus_out events.
To solve this problem, introduce two new helper functions which check
the relevant native surfaces to emit crossing events when needed that
get called evenly from both gdk_wayland_seat_grab()/ungrab() and gdk
_wayland_device_grab()/ungrab() APIs.
Fixes: https://bugzilla.gnome.org/show_bug.cgi?id=780422
Closes https://gitlab.gnome.org/GNOME/gtk/issues/792
Instead of tracking offers in GdkWaylandSelection objects, track the
pending offer in the GdkWaylandSeat and pass it to the GdkDragContext
once we get an enter event.
The header linux/input.h used by GDK is specific to Linux. It is
possible to get a few Linux headers on FreeBSD by installing v4l_compat,
but it is usually better to use the one shipped with FreeBSD.
We prefer dev/evdev/input.h to linux/input.h here, so it will always use
dev/evdev/input.h on FreeBSD regardless of v4l_compat.
https://svnweb.freebsd.org/changeset/ports/465644
Broke up a long line, added an empty one, indented another one, and re-aligned
a large amount of function parameter names that got misaligned in some past
refactoring.
https://bugzilla.gnome.org/show_bug.cgi?id=791939
This commit adds support the stable version of the xdg-shell protocol.
Support for the last version of the unstable series is left intact, but
will not receive new features.
The stable version is prioritized above the older version.
https://bugzilla.gnome.org/show_bug.cgi?id=791939
Now that all Cairo contexts are ported to managing cairo surfaces
themselves, the old fallback code that didi the managing is no longer
needed.
Also clarify the behavior of gdk_cairo_context_cairo_create() wrt the
vfunc by doing the early exit and the clipping outside of it.
We used to pass 2 regions to GdkDrawCotnext.end_frame() but code was
confusing what they meant. So we now don't do that anymore and only pass
the region that matters: The frame region.
This makes the previous gdk_draw_context_is_drawing() function public
under a new name.
I decided against the old name because we use the term "frame" for a
drawing operation, so I wanted to have this boolean flag reuse the term.
Also, split it into its own file - which was the original reason for
looking at this code, the rewrite was an unintentional side effect.
This changes the context to create surfaces on demand.
So whenever the compositor holds onto a surface while GDK wants to
render, it just creates a new surface. If the compositor releases
surfaces, we will retain one for the next frame to be rendered, but free
all extra ones.
This way, we should get to a stage where we have exactly as many
surfaces as needed and never allocate/free any.
And make the GdkCairoContext as abstract.
The idea of this and thje following commits is to get rid of all
Cairo code in gdksurface.c (and $backend/gdksurface-$backend.c)
by moving that code into the Cairo context files.
In particular, the GdkSurfaceClass.begin_frame/end_frame()
functions (which are currently exclusively used by the Cairo code
should end up being moved to GdkDrawContextClass.begin/end_frame().
This has multiple benefits:
1. It unifies code between the different drawing contexts.
GL lives in GLContext, Vulkan in VulkanContext and Cairo in
CairoContext. In turn, this makes it way easier to reason about
what's going on in surface-specific code. Currently pretty much
all backends do things wrong when they want to sync to drawing
or to the frame clock.
2. It makes the API of GdkSurface smaller. No drawing code (apart
from creating the contexts) needs to remain.
3. It confines Cairo to the Drawcontext, thereby making it way
more obvious when backends are still using it in situations
where it may now conflict with OpenGL (like when doing the dnd
failed animation or in the APIs that I'm removing in this
branch).
4. We have 2 very different types of Cairo contexts: The X/win32
model, where we have a natively supported Cairo backend but do
double buffering ourselves and use similar surfaces and the
Wayland/Broadway model where we use image surfaces without any
Cairo backend support and have to submit the buffers manually.
By not sharing code between those 2 versions, we can make the
actual code way smaller. We also get around the need to create
1x1 image surfaces in the Wayland backend where we pretend
there's a native Cairo surface.
The shortcuts inhibitors hash table is created when we create a
GdkWaylandWindow implementation for a GdkWindow, and it's destroyed once
we finalize the instance. The fake "root" window we create for the
Wayland display does not have a backing native window, so the shortcuts
inhibitors hash table is set to NULL; this causes a critical error
message when calling g_hash_table_destroy() on it. The finalization of
the root window happens when we close a display connection.
We should use g_clear_pointer(), instead, as it's NULL safe.
Without this change, the displayclose test fails, as all warnings are
considered fatal.
We can't freeze the frame clock on commit, but only after-paint,
otherwise the frameclock will resume in the paint stage.
So freeze the frame clock at the end of the frame if we are waiting for
a frame callback.
Note; The diff is only lage because of indentation changes due to
avoiding early returns in favor of a branch.
Instead of going through an ancillary script to strip away the
`WL_EXPORT` annotation from the generated code, we should bump up the
required version of Wayland, and use the `private-code` argument for
wayland-scanner, which does the right thing for us.
That way, we can store the right region there: The actual painted area
instead of the exposed area (which is way too small).
Also, the GL context is the only user of this data, so storing it there
seems way smarter.
A side effect of vkQueuePresentKHR is the Vulkan implementation calling
wl_surface_commit() on the corresponding Wayland surface. Thus, before
this, we must synchronize the surface state (e.g. opaque region, window
geometry, etc) that changed since last time. Prior to this commit this
was done after calling vkQueuePresentKHR(), causing the surface state to
always correspond to the previous buffer state. As of this commit this
is now done before calling vkQueuePresentKHR(), thus before
wl_surface_commit().
A side effect of eglSwapBuffers* is the EGL implementation calling
wl_surface_commit() on the corresponding Wayland surface. Thus, before
swapping buffers, we must synchronize the surface state (e.g. opaque
region, window geometry, etc) that changed since the last buffer swap.
Prior to this commit, this was done after eglSwapBuffers*, causing the
surface state to always correspond to the previous buffer state. As of
this commit this is now done before swapping the buffers, thus before
wl_surface_commit().
If a surface is unmapped by the client while gdk is processing updates,
(for example Firefox un-mapping its window on Expose events), the
windowing backend resources might be lost (for example with Wayland)
which can cause a crash in end_paint().
Make sure we drop the cairo surfaces as well when hiding the surface,
that will avoid the crash in gdk_surface_impl_wayland_end_paint() when
trying to attach the staging cairo surface to a released wl_surface,
these will be recreated when needed when the surface becomes visible
again and there is no need to keep such buffers around for a surface
which is not visible anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=793062
This is an automated change doing these command:
git sed -f g gtk_widget_set_has_window gtk_widget_set_has_surface
git sed -f g gtk_widget_get_has_window gtk_widget_get_has_surface
git sed -f g gtk_widget_set_parent_window gtk_widget_set_parent_surface
git sed -f g gtk_widget_get_parent_window gtk_widget_get_parent_surface
git sed -f g gtk_widget_set_window gtk_widget_set_surface
git sed -f g gtk_widget_get_window gtk_widget_get_surface
git sed -f g gtk_widget_register_window gtk_widget_register_surface
git sed -f g gtk_widget_unregister_window gtk_widget_unregister_surface
git checkout NEWS*
This is an automatic rename of various things related
to the window->surface rename.
Public symbols changed by this is:
GDK_MODE_WINDOW
gdk_device_get_window_at_position
gdk_device_get_window_at_position_double
gdk_device_get_last_event_window
gdk_display_get_monitor_at_window
gdk_drag_context_get_source_window
gdk_drag_context_get_dest_window
gdk_drag_context_get_drag_window
gdk_draw_context_get_window
gdk_drawing_context_get_window
gdk_gl_context_get_window
gdk_synthesize_window_state
gdk_surface_get_window_type
gdk_x11_display_set_window_scale
gsk_renderer_new_for_window
gsk_renderer_get_window
gtk_text_view_buffer_to_window_coords
gtk_tree_view_convert_widget_to_bin_window_coords
gtk_tree_view_convert_tree_to_bin_window_coords
The commands that generated this are:
git sed -f g "GDK window" "GDK surface"
git sed -f g window_impl surface_impl
(cd gdk; git sed -f g impl_window impl_surface)
git sed -f g WINDOW_IMPL SURFACE_IMPL
git sed -f g GDK_MODE_WINDOW GDK_MODE_SURFACE
git sed -f g gdk_draw_context_get_window gdk_draw_context_get_surface
git sed -f g gdk_drawing_context_get_window gdk_drawing_context_get_surface
git sed -f g gdk_gl_context_get_window gdk_gl_context_get_surface
git sed -f g gsk_renderer_get_window gsk_renderer_get_surface
git sed -f g gsk_renderer_new_for_window gsk_renderer_new_for_surface
(cd gdk; git sed -f g window_type surface_type)
git sed -f g gdk_surface_get_window_type gdk_surface_get_surface_type
git sed -f g window_at_position surface_at_position
git sed -f g event_window event_surface
git sed -f g window_coord surface_coord
git sed -f g window_state surface_state
git sed -f g window_cursor surface_cursor
git sed -f g window_scale surface_scale
git sed -f g window_events surface_events
git sed -f g monitor_at_window monitor_at_surface
git sed -f g window_under_pointer surface_under_pointer
(cd gdk; git sed -f g for_window for_surface)
git sed -f g window_anchor surface_anchor
git sed -f g WINDOW_IS_TOPLEVEL SURFACE_IS_TOPLEVEL
git sed -f g native_window native_surface
git sed -f g source_window source_surface
git sed -f g dest_window dest_surface
git sed -f g drag_window drag_surface
git sed -f g input_window input_surface
git checkout NEWS* po-properties po docs/reference/gtk/migrating-3to4.xml
Rename all *window.[ch] source files.
This is an automatic operation, done by the following commands:
for i in $(git ls-files gdk | grep window); do
git mv $i $(echo $i | sed s/window/surface/);
git sed -f g $(basename $i) $(basename $i | sed s/window/surface/) ;
done
git checkout NEWS* po-properties po
This renames the GdkWindow class and related classes (impl, backend
subclasses) to surface. Additionally it renames related types:
GdkWindowAttr, GdkWindowPaint, GdkWindowWindowClass, GdkWindowType,
GdkWindowTypeHint, GdkWindowHints, GdkWindowState, GdkWindowEdge
This is an automatic conversion using the below commands:
git sed -f g GdkWindowWindowClass GdkSurfaceSurfaceClass
git sed -f g GdkWindow GdkSurface
git sed -f g "gdk_window\([ _\(\),;]\|$\)" "gdk_surface\1" # Avoid hitting gdk_windowing
git sed -f g "GDK_WINDOW\([ _\(]\|$\)" "GDK_SURFACE\1" # Avoid hitting GDK_WINDOWING
git sed "GDK_\([A-Z]*\)IS_WINDOW\([_ (]\|$\)" "GDK_\1IS_SURFACE\2"
git sed GDK_TYPE_WINDOW GDK_TYPE_SURFACE
git sed -f g GdkPointerWindowInfo GdkPointerSurfaceInfo
git sed -f g "BROADWAY_WINDOW" "BROADWAY_SURFACE"
git sed -f g "broadway_window" "broadway_surface"
git sed -f g "BroadwayWindow" "BroadwaySurface"
git sed -f g "WAYLAND_WINDOW" "WAYLAND_SURFACE"
git sed -f g "wayland_window" "wayland_surface"
git sed -f g "WaylandWindow" "WaylandSurface"
git sed -f g "X11_WINDOW" "X11_SURFACE"
git sed -f g "x11_window" "x11_surface"
git sed -f g "X11Window" "X11Surface"
git sed -f g "WIN32_WINDOW" "WIN32_SURFACE"
git sed -f g "win32_window" "win32_surface"
git sed -f g "Win32Window" "Win32Surface"
git sed -f g "QUARTZ_WINDOW" "QUARTZ_SURFACE"
git sed -f g "quartz_window" "quartz_surface"
git sed -f g "QuartzWindow" "QuartzSurface"
git checkout NEWS* po-properties
The internal known_globals hashtable is used to carry accounting for
interfaces that depend on others (as ordering is not guaranteed), extend
its usage so it also keeps track of unimplemented interfaces (here at
least).
The API call will then use this to allow querying the globals offered by
the compositor, it will be useful to determine whether we can use
text-input protocols or should fallback to other IMs.
Remove all the old 2.x and 3.x version annotations.
GTK+ 4 is a new start, and from the perspective of a
GTK+ 4 developer all these APIs have been around since
the beginning.
The GDK_POINTER_MOTION_HINT_MASK enumeration value is gone, but we're
still keeping around the "is_hint" field in GdkEventMotion, even though
every backend sets it to `false` — except for the core X11 device
manager.
GdkContentFormatsBuilder is currently not introspectable, as it does not
have a GType. We can turn it into a boxed type, but we need to implement
memory management for it.
The current gdk_content_formats_builder_free() function returns a newly
constructed value, so we cannot use it as a GBoxedFreeFunc; additionally
copying a GdkContentFormatsBuilder contents would make it a bit odd, as
you could get multiple identical GdkContentFormats out of the copies.
A simple approach is to model the GdkContentFormatsBuilder API to follow
the GBytes one: use reference counting for memory management, and have
a function to release a reference, return a GdkContentFormats, and reset
the GdkContentFormatsBuilder state.
For language bindings, we can provide a get_formats() function that
returns the GdkContentFormats instance and resets the builder instance,
leaving the reference count untouched.
For C convenience we can keep gdk_content_formats_builder_free(), and
make it a wrapper around gdk_content_formats_builder_get_formats(), with
the guarantee that it'll free the builder instance regardless of its
current reference count.
https://bugzilla.gnome.org/show_bug.cgi?id=793097https://blogs.gnome.org/otte/2018/02/03/builders/
GDK has a lock to mark critical sections inside the backends.
Additionally, code that would re-enter into the GTK main loop was
supposed to hold the lock.
Back in the Good Old Days™ this was guaranteed to kind of work only on
the X11 backend, and would cause a neat explosion on any other GDK
backend.
During GTK+ 3.x we deprecated the API to enter and leave the critical
sections, and now we can remove all the internal uses of the lock, since
external API that uses GTK+ 4.x won't be able to hold the GDK lock.
https://bugzilla.gnome.org/show_bug.cgi?id=793124
The main GDK thread lock is not portable and deprecated.
The only reason why gdk_threads_add_timeout() and
gdk_threads_add_timeout_full() exist is to allow invoking a callback
with the GDK lock held, in case 3rd party libraries still use the
deprecated gdk_threads_enter()/gdk_threads_leave() API.
Since we're removing the GDK lock, and we're releasing a new major API,
such code cannot exist any more; this means we can use the GLib API for
installing timeout callbacks.
https://bugzilla.gnome.org/show_bug.cgi?id=793124
BTN_STYLUS3 is defined by the Linux 4.15 kernel and is sent when the
third button on a stylus is pressed. At the moment, only Wacom's "Pro
Pen 3D" has three stylus buttons. Pressing this button triggers a button
8 event to be sent under X11, so we use the same mapping here.
https://bugzilla.gnome.org/show_bug.cgi?id=790033
We have a couple of Python 3.x scripts that parse C files, and since C
does not have any encoding, we need to force one ourselves, to avoid the
case when we're running the build in a non-UTF-8 locale.
https://bugzilla.gnome.org/show_bug.cgi?id=792497
This state flag is used in several places in GTK+, for example to
ignore RESIZE_INC hints if tiled. Setting it is also necessary for
backwards compatibility with applications that changed their behaviour
when tiled, such as GNOME Terminal and its MATE fork.
Signed-off-by: Simon McVittie <smcv@debian.org>
https://bugzilla.gnome.org/show_bug.cgi?id=789357
The query function for cursor sizes and capabilities
are not very interesting. At least, they are not used
in GTK+, and all backends but X11 just hardcode
made-up values anyway. So, lets drop them.
As far as possible, use per-display debug flags.
This will minimize the debug spew that we get from
the inspector if it is running on a separate display.
Instead, pass the source window to gdk_drag_begin().
Also make Wayland use this window instead of the one under the pointer
(though those 2 Windows are most likely the same anyway).
Without selections, drags can't have them either.
Also included is removing the selection from GtkSelectionData.
Includes a bunch of crude cleanups to Wayland code that no longer has to
care about selection atoms.
It won't stand true anymore that the GdkEventType argument is the
first field of the GdkEvent* structs. All callers have been updated
to use event->any.type instead.
Instead of just passing the GdkContentFormats, we are now passing the
GdkContentProvider to gdk_drag_begin().
This means that GDK itself can now query the data from the provider
directly instead of having to send selection events.
Use this to provide the private API gdk_drag_context_write() that allows
backends to pass an output stream that this data will be written to.
Implement this as the mechanism for providing drag data on Wayland.
And to make this all work, implement a content provider named
GtkDragContent that is implemented by reverting to the old DND
drag-data-get machinery inside GTK, so for widgets everything works just
like before.
Instead, pass the actions as part of gdk_drag_begin() and insist DND is
always managed.
A new side effect is that gdk_drag_begin() can now return %NULL.
This is the replacement for selection usage.
Backend implementations for X11 (missing support for backwards compat
formats like COMPOUND_TEXT) and Wayland are included.
GTK code should be adapted to use gdk_drop_read_*() functions instead
of gtk_drag_get_data().
In order to map a window with the correct initial parent-child
relationship when a modal dialog is set up to be a child of an imported
foreign window, the relationship must be set up before the window is
mapped.
In order to do this, if a window is not yet mapped, postpone the
relationship setup until when the window is eventually mapped.
https://bugzilla.gnome.org/show_bug.cgi?id=791062
Traditionally (and on most backends) there's a single master pointer driven
by all pointing devices. The notable exception is Wayland though, where
master pointing devices are created per capability in the case of
pointer/touch, and one for each drawing tablet.
This function call makes it easy to access all these.
https://bugzilla.gnome.org/show_bug.cgi?id=790920
