Temp windows without parent are used frequently in our testsuite;
using g_warning on them causes the tests to fail, which is not
useful. Reduce the warning to a g_message.
Presently, Gtk will only send a startup notification completion message
for the first window that is shown. This is not good for the case of
GtkApplication, where we are expected to participate in
startup-notification for all windows.
We have avoided this problem by manually emitting the startup complete
message from after_emit in GtkApplication.
Unfortunately, this causes problems for windows that are shown with a
delay. It is also a dirty hack.
The reason for the original behaviour is simple: there is a static
boolean in gtkwindow.c which controls it. We remove this.
Instead, clear the startup notification ID stored in GDK when sending
the completion message. GtkApplication will re-set this the next time
an event comes in which needs startup-notification handling. In the
non-GtkApplication case, newly shown windows will still not send the
message, since the cookie will have been cleared.
Finally, we remove the hack from GtkApplication's after_emit.
This will probably cause some regressions in terms of lingering startup
notification messages. The correct solution here is to always use
gtk_window_present(), including when merely opening a new document (with
a new tab, for example).
https://bugzilla.gnome.org/show_bug.cgi?id=690791
This was a thinko - what we sometimes do for signal names is to
use I_() to intern them (to avoid a strdup), but I_() is not
currently available in gdk, so lets just skip this
microoptimization for now.
It looks like the gnome-continuous headers haven't quite
caught up yet, so try __NR_memfd_create instead.
If that doesn't work, i'll likely just add in a fallback
code path.
The tmpdir is used for a wide assortment of things, and
can easily fill up. If it fills then desktop will start
crashing with SIGBUS errors.
This commit changes the shm pool allocation code, to use
memfd_create, instead, so the shared memory files will
be anonymous and not associated with /tmp
https://bugzilla.gnome.org/show_bug.cgi?id=761095
create_shm_pool doesn't need the width or height, it just needs
the total size. By passing it in, we're requiring it to redo
stride calculation unnecessarily.
This commit drops the width and height parameters and makes the
function just take the total size directly.
https://bugzilla.gnome.org/show_bug.cgi?id=760897
Right now, we assume the stride for the image surface needs to
be 4 byte aligned. This is, in fact, true, but it's better to
ask cairo for the alignment requirement directly rather than
assume we know the alignment rules.
This commit changes the code to use cairo_format_stride_for_width
to calculate a suitable rowstride for pixman.
https://bugzilla.gnome.org/show_bug.cgi?id=760897
create_shm_pool unlinks the temporary file a little,
too late. It should be unlinked before ftruncate()
is called for two reasons:
1) if ftruncate fails, the file is currently not
getting cleaned up at all
2) in theory, if the file is public some other process
could muck with it
This commit just moves the unlink call a little higher
up.
https://bugzilla.gnome.org/show_bug.cgi?id=760897
This function does not ignore empty rectangles. Since this
is a fairly subtle point about the behavior, it is worth
spelling this out in the documentation. We've had a bug
open about this for a long time:
https://bugzilla.gnome.org/show_bug.cgi?id=464528
These functions will be automatically called by the windowing backend.
The usual hooks to run this from in gtk/ shouldn't even happen, but
it is worth to document which calls are expected and which aren't.
If the grab window is destroyed the grab will be implicitly removed,
although we won't get GdkSeat:ungrab called in order to clear our
internal window<->seat relation entirely. Setting a weak ref will
nullify the pointer we keep on the seat to the window, avoiding the
expected crashes.
Due to implicit grabs, we basically can guarantee that the pointer
won't have any buttons pressed at the time of wl_pointer.enter.
Seems like a good place to unset any button modifiers that might
have been left stale by compositor grabs.
This includes managing input events and source-side DND events,
as well as setting the appropriate cursor and emitting the signals
that are expected in this mode of operation.
This function (most similar to gtk_drag_get_cursor() helps figure out
the right cursor that applies to a given action. To be used by the
various backends.
We've traditionally left GTK+ to handle the input side of things,
letting GDK only manage the windowing-specific messaging. This
way of splitting responsibilities is not compatible however with
some backends, we must fold then input management at the DnD stage
into GDK (and backends) domain.
The gdk_drag_context_manage_dnd() call is meant to be the entry
point for this mode of operation, if the drag and drop operation
becomes managed, the caller (i.e. gtkdnd.c) doesn't need to perform
grabs, nor manage input events itself.
As a consequence of this, different aspects now belong to the
backend GdkDragContext implementation:
- Because the caller doesn't see keyboard events anymore,
keyboard navigation must be managed in GDK, so is the decision
of the current action based on modifiers/button pressed.
- Because the caller won't see input events in general, the lifetime
of the drag and drop operation is now communicated through the
::drop-performed, ::dnd-finished and ::cancel events
- Because the caller doesn't participate anymore on the action
being chosen, the pointer cursor must be set by the backend.
The caller is rather notified of the final action through the
::action signal.
The caller is still responsible of dealing with the corresponding
GdkSelection, ensuring its ownership and communicating the supported
mimetypes.
And use it to handle kinetic scrolling in the GtkScrolledWindow.
However, dropping the delta check causes the X11-based kinetic
scroll to break since we don't have the stop event here. Correct handling of
xf86-input-libinput-based scroll events is still being discussed.
https://bugzilla.gnome.org/show_bug.cgi?id=756729
This adds support for the new wl_pointer events available in v5.
The wl_pointer.axis_source events can be ignored for the purposes here, the
main reason they exist is so that the combination of axis_source=finger and
axis_stop triggers kinetic scrolling. We don't need to care about the source,
axis_stop is enough for us to tell us when we're scrolling.
The wl_pointer.frame events group events together and is intended as a
mechanism to coalesce events together. This for example allows us to now
send a single GTK scroll event for a diagonal scroll. Previously, the two
wl_pointer.axis events had to be handled separately.
The wl_pointer.axis_discrete event sends mouse wheel clicks where
appropriate, and is translated into up/down/left/right scroll events.
https://bugzilla.gnome.org/show_bug.cgi?id=756729
This prevents WM from drawing shadows around tooltip windows,
which, in Adwaita, should have no shadow and are CSD-ish (which means
that tooltip window is larger than it looks, and WM draws the shadow
only on the outside, leaving a gap between the visible tooltip edge and
the shadow).
https://bugzilla.gnome.org/show_bug.cgi?id=759898
When a cursor is specified in gdk_seat_grab(), the cursor is reverted as
soon as the pointer enters or leaves another window.
To avoid this issue, store the grab cursor separately, so we force-apply
it in ::set_window_cursor(). Also, unset early the seat info from the
window on gdk_seat_ungrab(), so the next time switch_to_pointer_grab()
happens we end up picking the cursor set for the window underneath the
pointer window.
Based on a patch by Olivier Fourdan <ofourdan@redhat.com>.
https://bugzilla.gnome.org/show_bug.cgi?id=760213
We are getting the mime data destroy notify called when we
destroy the surface in finalize. Trying to set the XSync counters
at this time is a) pointless and b) yielding an X error because
the counters have already been destroyed.
To avoid this, unhook the damage tracking before destroying
the surface.
https://bugzilla.gnome.org/show_bug.cgi?id=760188
We are setting mime data with a destroy notify on the cairo
surface to get notified when cairo registers damage for the
surface (in that case, it clears the mime data, calling the
destroy notify). Unfortunately, the destroy notify is also
called when we remove the mime data ourselves, which was
not intentional.
Use a flag in the window impl struct to ignore the callback
when we are clearing the hook.
Instead of creating an intermediate pixbuf, just render
the window surface onto the new surface. Doing things this
way lets us avoid the cairo_surface_mark_dirty() call in
gdk_pixbuf_get_from_window(), which is not generally safe
to call on 'random' surfaces - it asserts that the surface
has no mime data attached, and the X11 backend uses mime
data for damage tracking purposes...
We destroy the widget that is wrapped around the drag window
when the object data on the drag context gets cleared. Destroying
the window before that happens leads to unpleasantries. E.g. we may
try to access the frame clock, which doesn't exist anymore, and
things go downhill from there. So, keep the window alive for
a little longer.
We destroy the widget that is wrapped around the drag window
when the object data on the drag context gets cleared. Destroying
the window before that happens leads to unpleasantries. E.g. we may
try to access the frame clock, which doesn't exist anymore, and
things go downhill from there. So, keep the window alive for
a little longer.
X11 has the notions of "transient for group", and while it's an ICCCM
violation, it's commonly used and documented that a window manager
would treat a window with transient_for set to None to transient for all
windows of its group.
gtk uses this when an application sets a dialog type window but does not
specify an explicit transient.
While this works on X11, there is no such thing as groups in Wayland and
the closest equivalent which is set_parent() in xdg-shell takes only one
parent. This is what is used for modal dialogs.
To get something similar in behavior to what is available on X11, a
solution is to update the parent() of the dialogs without transient when
the active surface changes.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=759161
Quite a few applications use GTK_WINDOW_POPUP to create various
temporary windows and place then on screen. That works fine on X11 but
on Wayland there is no global coordinate system for regular surfaces.
If the application is using a gdk temp window and set a parent with
gtk_window_transient_for(), the gdk wayland backend has all it needs to
create a subsurface that can be placed at will by the application.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=759738
Always returning a left_ptr if we can't find anything better
broke firefox application-specific fallback for missing cursors.
Keep that working by only doing the fallback for the CSS cursor
names, not for things like hashes.
https://bugzilla.gnome.org/show_bug.cgi?id=760141
Always returning a left_ptr if we can't find anything better
broke firefox application-specific fallback for missing cursors.
Keep that working by only doing the fallback for the CSS cursor
names, not for things like hashes.
https://bugzilla.gnome.org/show_bug.cgi?id=760141
Functions requiring CoInitialize are called just in two places:
- the filechooser thread which calls its own CoInitializeEx
- the dnd code
Moving CoInitialize in the dnd specific init is cleaner and
we can pair it with the corresponding CoUninitialize since
CoUninitialize should be called as many times as CoInitialize.
Note that it is ok to call this function multiple times, so it
will not break if another codepath will need it in the future.
The patch also replaces the deprecated CoInitialize with the
equivalent call to CoInitializeEx (already used in the filechooser).
In most places, we can do with the pointer/keyboard of the default seat
instead of the client pointer. We can also remove some code from
gdk_input_init() because we know for sure there's no floating devices to
care about here.
There's places where we still need to deal with floating devices, which are
unseen by seats. Ignore deprecations and keep using GdkDeviceManager until
we can forget about floating devices.
There's places where we still need to deal with floating devices, which are
unseen by seats. Ignore deprecations and keep using GdkDeviceManager until
we can forget about floating devices.
There's places where we still need to deal with floating devices, which are
unseen by seats. Ignore deprecations and keep using GdkDeviceManager until
we can forget about floating devices.
There's places where we don't set a seat yet, plus the places
outside GTK+ where events are created, we should warn and fall
back to the master device seat with these.
Gdk Wayland backend walks up the transient windows tree, but does not
check for cycles when doing so.
As a result, if two or more windows are transient to each other, the
Wayland gdk backend will enter an infinite loop.
While this is clearly a bug in the application, gtk+/gdk should be more
robust and handle such errors more gracefully.
To avoid looping infinitely at various point in the code, check for a
possible loop when setting the transient relationship and deny the
request to set a window transient for another if that would create a
loop.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=759299
gdk_pixbuf_get_from_window() paints the given window onto a new cairo
surface. Create that new surface with the same device scale as the
window so that the result is not scaled down on hidpi screens.
This is similar to 657a43e (which was reverted), but doesn't modify the
behavior of gdk_pixbuf_get_from_surface().
https://bugzilla.gnome.org/show_bug.cgi?id=757147
Our actions on ::device-removed only actually applied to master
pointers, so listening to GdkDisplay::seat-removed and operating
on the seat pointer is equivalent.
