If the monitor vfuncs are not implemented in a display class,
fall back to providing a single monitor object representing
the entire screen. This is not meant to be 'good enough', it
is just to provide some implementation until all backends
implement the monitor vfuncs. When that is the case, the
fallback should be removed.
NoSymbol is not a valid GDK symbol (it only has the concept of
VoidSymbol, for some reason, which is neither the same thing nor
produced by any sane keymap). Passing NoSymbol events through to GTK+
apps is unlikely to produce anything useful.
In particular, this meant VTE would scroll to the end of the buffer when
pressing Fn (required for Page Up/Down on Macs), as it was receiving a
keypress that wasn't a modifeir. This does not happen on X11, as the
KEY_FN keycode is above 255, so does not get sent to clients.
https://bugzilla.gnome.org/show_bug.cgi?id=764825
We don't care about the specific (possibly client-side) window that
requested the focus here, only the toplevel. Fixes mistakenly sent
focus events when the grab happens inside the current focus window.
https://bugzilla.gnome.org/show_bug.cgi?id=762756
Always associate a drag context with a GdkDisplay and use that when
getting a cursor for a given action.
If we don't do this, dragging on a window that doesn't use the default
display will make us use cursors from the wrong display.
https://bugzilla.gnome.org/show_bug.cgi?id=765565
Typically, there won't be any references on old frame timings except for
the most recent timing. So instead of discarding these and re-entering
gslice twice, just steal the old frame timing and reuse it.
https://bugzilla.gnome.org/show_bug.cgi?id=765592
Don't track all orphaned dialogs globally, as mixing them up with each
other would in most cases trigger errors when we try to pass bogus
values to Wayland requests.
https://bugzilla.gnome.org/show_bug.cgi?id=765474
The naming of pointers to GdkWaylandDisplay's were inconsistent.
Running the following commands in gtk+/gdk/wayland illustrate the
inconsistency:
$ grep -r '\<display_wayland\>' *.[ch] | wc -l
195
$ grep -r '\<wayland_display\>' *.[ch] | wc -l
81
This patch renames all occurrences of "wayland_display" to
"display_wayland". This is also consistent with naming in the X11
backend. A couple of whitespace changes were done as well in places
where the rename was already done, that added line breaks to long lines
that stood out.
https://bugzilla.gnome.org/show_bug.cgi?id=765474
When synthesizing keyboard repeat, we can potentially drift further from
the mark depending on the timing of the frame callback and how long it
took to deliver the event.
This patch attempts to reduce this by tracking from a stable epoch the
time of our next keyboard repeat.
https://bugzilla.gnome.org/show_bug.cgi?id=765567
This allows us to decide when the R and B color channels should be
flipped with a much better granularity.
For instance, when using GLX_EXT_texture_from_pixmap to create a GL
texture from a surface we don't need to swap the R and B channels, as
the internal representation of the texture data will already have the
appropriate colors.
We also don't need to flip color channels when blitting from a texture.
Cairo surfaces are in BGRA format, but we upload them as RGBA buffers on
GLES; this means that the R and B channels are flipped in the texture
data.
Instead of doing a costly channel flip before putting them on the GPU,
we can flip the values inside the GLSL shader we use specifically for
GLES.
We cannot use GL_BGRA and GL_UNSIGNED_INT_8_8_8_8_REV when reading back
from the frame buffer in the software fallback path, as they do not
exist on OpenGL ES.
This will make the slow path a bit slower, because of the implicit
format conversion.
When uploading a Cairo image surface to a GL texture we cannot use
GL_BGRA and GL_UNSIGNED_INT_8_8_8_8_REV on OpenGL ES, as they do not
exist in the core spec.
On some platforms we can ask the GL context machinery to create a GLES
context, instead of a GL one.
In order to ask for a GLES context at GdkGLContext realization time, we
use a bit field like we do for forward compatible, or debug contexts.
The 'use-es' bit also changes the way we select a default version,
because OpenGL and OpenGLES versions differ.
https://bugzilla.gnome.org/show_bug.cgi?id=743746
Windows save in hardware_keycode an information which is not so low
level and some application require the hardware scancode.
As Windows provides this information save it in GdkEventPrivate
and provide a function to get this information.
For no Windows system the function return the hardware_keycode instead.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=765259
This first adds a common autotools module that can be included by
the Makefile.am's to generate the file lists and the g-ir-scanner/
g-ir-compiler command lines to build the introspection files.
The autotools files for gdk/ and gtk/ are then updated to generate
the full file lists needed to build the introspection files, with
the full command lines for g-ir-scanner and g-ir-compiler as NMake
Makefile modules that can be used to build the introspection files
for Visual Studio builds.
https://bugzilla.gnome.org/show_bug.cgi?id=765195
These were showing up higher in Sysprof profiles.
The simple fix is to avoid the emit_by_name() and let the interface emit
the signals directly. No function preconditions are provided since these
are internal API.
If we get gdk_wayland_seat_flush_frame_event() with no previous event to be
flushed, we fallback into the scroll event checks. However, there's no check
performed there as to whether it really scrolled, so it'd always send a smooth
scroll event with 0/0 deltas in this case.
This should be mostly harmless, but still, we should only end up emitting scroll
events if those really happened.
The frame event is also meant to compress wl_pointer.leave events, at this
point the focus surface will be definitely NULL. In the end, wl_pointer.frame
should flush the last composed event despite the pointer focus.
https://bugzilla.gnome.org/show_bug.cgi?id=765065
We must emit the cancel event with the same semantics, and towards the GdkWindow
that is currently under the touchpoint, so make proxy_button_event() deal with
GDK_TOUCH_CANCEL.
Fixes the GDK_TOUCH_CANCEL event being emitted only on the toplevel, which is
usually non-sufficient.
Since Wayland is using libxkbcommon, it inherits X unfortunate
real/virtual modifier distinction, so we have to do the same
gymnastics we do for X to map between the two.
This should fix matching of accelerators using virtual modifiers
(modulo gnome-shell bugs regarding the handling of Super).
https://bugzilla.gnome.org/show_bug.cgi?id=764424
MoveWindow should not be used over the pre-existing move/resize
functions, which already correctly position a window with respect
to its parent, while also taking into account the size of window
decorations.
https://bugzilla.gnome.org/show_bug.cgi?id=765100
gdk_window_reparent() already changes children list for old and new parent.
Doing so twice results in a circular reference in the list, which can hang
the application later, for example in gtk_window_show().
https://bugzilla.gnome.org/show_bug.cgi?id=764845
This makes usage of _gdk_display again when creating a window.
This is needed because there is a window created when the display
is being initialized, so it becomes a chicken and egg problem.
For now we roll back this to fix the wintab crash but we might
want to fix this again in the future by improving the wintab
initialization.
https://bugzilla.gnome.org/show_bug.cgi?id=764664
The zoom/rotate change for quartz does not build on 10.7. This change
adds zoom/rotate support in quartz only for 10.8 and following. The
problems is described here:
https://bugzilla.gnome.org/show_bug.cgi?id=760276 and here
https://trac.macports.org/ticket/51052
NSEventPhaseMayBegin was only introduced in 10.8 although documentation
says it is introduced in 10.7. Tests on 10.7 indicate that the phase
property for the Magnify event is not supported at all on 10.7
On wayland, such axes are per-tool, we must update device capabilities
on the fly as new tools enter proximity, first the slave device so
it matches the current tool, and then the master device so it looks
the same than the current slave device.
Only the management of tablets and tools is added so far. No tablet events
are yet interpreted.
As it's been the tradition in GTK+, erasers are split into their own device,
whereas the rest of the tools are meant to be routed through the
GDK_SOURCE_PEN device. Both pen/eraser devices are slaves to a master
pointer device, separate to wl_pointer's. This is so each tablet can
maintain its own cursor/positioning accounting.
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
This will enable multiple "pointers" to have separate data here.
Will come out useful when adding support for tablets, as they
will have a separate cursor for all purposes.
Because there are multiple different types of styluses that can be used with
tablets, we have to have some sort of identifier for them attached to the
GdkDeviceTool, especially since knowing the actual tool type for a GdkDeviceTool
is necessary for matching up a GdkDeviceTool with it's appropriate
GdkInputSource in Wayland (eg. matching up a GdkDeviceTool eraser with the
GDK_SOURCE_ERASER GdkInputSource of a wayland tablet).
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
On the devices and backends that support it, this signal will be emitted
on slave/floating devices whenever the tool they are interacting with
changes. These notifications may also work as a sort of proximity events,
as the tool will be unset when the pen moves too far.
For backends, gdk_device_update_tool() has been included, all that should
be done on their side is just calling this whenever any tool might have
changed.
GdkDeviceTool is an opaque object that can be used to identify a given
tool (eg. pens on tablets) during the app/device lifetime. Tools are only
set on non-master devices, and are owned by these.
The accounting functions are made private, the only public call on
GdkDeviceTool so far is gdk_device_tool_get_serial(), useful to identify
the tool across runs.
