Most of the surface api we have in the Wayland backend
only makes sense for toplevels, so reshuffle things to
take a GdkToplevel instead of a GdkSurface.
Update all callers and the docs.
We must wl_surface.commit after xdg_surface.ack_configure to make it
have an effect. We failed to do so when a configure event didn't result
in new updates, so make sure we fall back on an simple
wl_surface.commit if there was no new actual frame painted.
Closes: #2910
In order to make the cairo renderer/context behave more similar to how
the OpenGL and Vulkan renderer/context behaves, request a frame callback
and commit in the end frame vfunc.
This means the end frame vfunc in cairo does
* attach buffer
* request frame callback
* sync surface state
* commit
Where as e.g. the OpenGL version of the same flow does
* attach buffer
* request frame callback
* sync surface state
* eglSwapBuffers()
where eglSwapBuffers() indirectly calls wl_surface_commit().
When using the gdk_display_close(), the handle to the Wayland compositor was not released. This could cause the consumption of all available handles, preventing other processes from accessing the display.
Fixing this by calling wl_display_disconnect() when releasing the GdkWaylandDisplay object.
Signed-off-by: Julien Ropé <jrope@redhat.com>
Handle both these settings, and the older settings-daemon ones for
backwards compatibility. The keys are already checked for existence
in the schema, so it will just use the existing ones.
Prefer this location, but also look for the old location in
settings-daemon for backwards compatibility. This applies to both
direct settings lookups and via the settings portal.
When we send an anchor rectangle with a width or
height of 0, mutter reponds with "Invalid anchor
rectangle size". So, don't do that.
This was seen as sudden disappearance of gtk4-demo
when you click the fishbowl benchmark all the way
through to the menubuttons.
Fixes: #3027
We might break the loop early, e.g. if we're unmapped before the round
trip finishes, and to avoid the callback to write to invalid stack
memory, destroy the callback so it won't be invoked.
Fixes: #3026
GTK will not up front know how to correctly calculate a size, since it
will not be able to reliably predict the constraints that may exist
where it will be mapped.
Thus, to handle this, calculate the size of the toplevel by having GDK
emitting a signal called 'compute-size' that will contain information
needed for computing a toplevel window size.
This signal may be emitted at any time, e.g. during
gdk_toplevel_present(), or spontaneously if constraints change.
This also drops the max size from the toplevel layout, while moving the
min size from the toplevel layout struct to the struct passed via the
signal,
This needs changes to a test case where we make sure we process
GDK_CONFIGURE etc, which means we also needs to show the window and
process all pending events in the test-focus-chain test case.
Make GdkEvents hold a single GdkDevice. This device is closer to
the logical device conceptually, although it must be sufficient for
device checks (i.e. GdkInputSource), which makes it similar to the
physical devices.
Make the logical devices have a more accurate GdkInputSource where
needed, and conflate the event devices altogether.
This uses the idle-inhibit protocol from wayland-protocols, to attach an
inhibitor to the GdkSurface. The inhibit function can be called as many
times as the user wants, but the uninhibit function MUST be called as
many times to unset the idle inhibition.
This has been tested on Sway.
The included fribidi header is not used in gdkkeys-wayland.c and already
included in gdk.c which causes linker issues due to the header defining
a global variable.
This is not used anymore now that surfaces are always toplevel in the
semantics of GdkWindow where child windows were available. We can drop
that and simplify the vfunc just a bit more.
Fixes#2765
If the tablet gets removed/freed while there are pad events in flight,
we leave a dangling pointer from the pad to the tablet, which may
lead to invalid reads/writes when handling the pad event(s).
If you run weston with the headless backend, you get a Wayland
display with no seat, which is just fine by the protocol.
gdk_display_get_default_seat() returns NULL in this case. Various
widgets assume that we always have a seat with a keyboard and a
pointer, since that is what X guarantees. Make things survive
without that, so we can run the testsuite under a headless
Wayland compositor.
We currently calling gdk_display_map_keyval up to
once per key event per shortcut trigger, and that function
does an expensive loop over the entire keymap and
allocates an array. Avoid this by caching the entries
in a single array, and have a lookup table for finding
the entries for a keyval.
To do this, change the GdkKeymap.get_entries_for_keyval
signature, and change the ::keys-changed signal to be
RUN_FIRST, since we want to clear the cache in the class
handler before running signal handlers. These changes are
possible now, since keymaps are no longer public API.
In the absence of icon themes (such as in a freshly
created toolbox container), we should not just fall back
to "no cursor", since that makes it hard even to close
the application. Fall back to an included default cursor
of last resort.
If the wl_surface receiving touch events is destroyed, we will get no
wl_touch.up event to remove the touchpoint from our internal accounting.
Check for this, and drop touchpoints happening in surfaces that do
disappear during operation.
We don't create a grabbing popup if it's not the top most one, as that
is a protocol violation, and complain if anything attempts to do it.
What we didn't do is handle this gracefully in the code that tries to
create said popup.
Fix this by dropping the attempt to show the popup on the floor, instead
of setting various state making it look like it succeeded. This won't
actually fix anything, but it'll result in a bit more accurate warnings
logged, as the state more correctly corresponds to the reality.
GdkEvent has been a "I-can't-believe-this-is-not-OOP" type for ages,
using a union of sub-types. This has always been problematic when it
comes to implementing accessor functions: either you get generic API
that takes a GdkEvent and uses a massive switch() to determine which
event types have the data you're looking for; or you create namespaced
accessors, but break language bindings horribly, as boxed types cannot
have derived types.
The recent conversion of GskRenderNode (which had similar issues) to
GTypeInstance, and the fact that GdkEvent is now a completely opaque
type, provide us with the chance of moving GdkEvent to GTypeInstance,
and have sub-types for GdkEvent.
The change from boxed type to GTypeInstance is pretty small, all things
considered, but ends up cascading to a larger commit, as we still have
backends and code in GTK trying to access GdkEvent structures directly.
Additionally, the naming of the public getter functions requires
renaming all the data structures to conform to the namespace/type-name
pattern.
A toplevel will only ever be transient-for to another toplevel, and only
a toplevel will ever be transient-for, so move the field into the
GdkWaylandToplevel, and make it a pointer to another GdkWaylandToplevel.
We them up there, so that code higher up compared to where they are
defined now can make use of them. Also add a few macros for type
checking and casting.
The third version of xdg-shell introduces support for explicit popup
repositioning. If available, make use of this to implement popup
repositioning.
Note that this does *NOT* include atomic parent-child state
synchronization. For that,
https://gitlab.freedesktop.org/wayland/wayland-protocols/issues/13 will
be needed.
This currently uses my own fork of wayland-protocols which adds meson
support, so that we can use it as a subproject. Eventually when
wayland-protocols' meson support lands upstream, we should change it to
point there.
Silence some meson warnings while at it to make CI happy.
This also bumps the glib requirement, since g_warning_once() is used.
Add all of the keyboard translation results in the key event,
so we can translate the keyboard state at the time the event
is created, and avoid doing state translation at match time.
We actually need to carry two sets of translation results,
since we ignore CapsLock when matching accelerators, in
gdk_event_matches().
At the same time, drop the scancode field - it is only ever
set on win32, and is basically unused in GTK.
Update all callers.
When we `Alt+Tab` away from a GTK application, it loses keyboard focus.
If we don't clear the modifiers, events from other devices that we
receive while unfocused will assume `Alt` is still pressed. This results
in e.g. Firefox navigating through the history instead of scrolling the
page when using the mouse wheel on it.
We don't get any information about modifiers while we are missing
keyboard focus, so assuming no modifiers are active is the best we can
do.
The shell sends us a modifier update immediately before we regain
keyboard focus, so the state shouldn't get out of sync.
Fixes https://gitlab.gnome.org/GNOME/gtk/-/issues/2112
With the current implementation, we use a `wl_seat` as the key for our
internal has table where we store the Wayland shortcuts inhibitors.
There is however no technical reason for this, and we could use a
GdkSeat instead, which will ease the implementation of the GdkToplevel
shortcut inhibition API.
There is no shape combining going on anymore, so
call this just gdk_surface_set_input_region, and
remove the offset arguments too. All callers pass
0 anyway.
Update all callers and implementations.
Sprinkle various g_assert() around the code where gcc cannot figure out
on its own that a variable is not NULL and too much refactoring would be
needed to make it do that.
Also fix usage of g_assert_nonnull(x) to use g_assert(x) because the
first is not marked as G_GNUC_NORETURN because of course GTester
supports not aborting on aborts.
Drop the input-mode, since it only makes sense for
floating devices, which we don't have anymore. And renamt
::input-source to ::source, to match the getter.
Update all users.
When a popup is already showing, and gdk_surface_present_popup() is
called, if the layout didn't change, we're not really interested in
relayouting.
In the future, we'll be able to get notified if position of the popup
would change by some environmental changes, but until then, just don't
support it.
Restructure the getters for event fields to
be more targeted at particular event types.
Update all callers, and replace all direct
event struct access with getters.
As a side-effect, this drops some unused getters.
Replace the gdk_surface_move_to_rect() API with a new GdkSurface
method called gdk_surface_present_popup() taking a new GdkPopupLayout
object describing how they should be laid out on screen.
The layout properties provided are the same as the ones used with
gdk_surface_move_to_rect(), except they are now set up using
GdkPopupLayout.
Calling gdk_surface_present_popup() will either show the popup at the
position described using the popup layout object and a new unconstrained
size, or reposition it accordingly.
In some situations, such as when a popup is set to autohide, presenting
may immediately fail, in case the grab was not granted by the display
server.
After a successful present, the result of the layout can be queried
using the following methods:
* gdk_surface_get_position() - to get the position relative to its
parent
* gdk_surface_get_width() - to get the current width
* gdk_surface_get_height() - to get the current height
* gdk_surface_get_rect_anchor() - to get the anchor point on the anchor
rectangle the popup was effectively positioned against given
constraints defined by the environment and the layout rules provided
via GdkPopupLayout.
* gdk_surface_get_surface_anchor() - the same as the one above but for
the surface anchor.
A new signal replaces the old "moved-to-rect" one -
"popup-layout-changed". However, it is only intended to be emitted when
the layout changes implicitly by the windowing system, for example if
the monitor resolution changed, or the parent window moved.
We can map a non-grabbing popup wherever, it's just the grabbing
popup-chain that needs to be ensured not to break any ordering rules.
Fix this by managing two lists; one of open popups, and another for
grabbing ones.
Now popups surfaces are always created with the parent set, so we don't
need to implement vorious guess work to try to find what the parent
might be. Remove that code and just use GdkSurface::parent which is
where the parent set during construction ends up at.
Add event queues specifically for surface configuration events
(xdg_surface.configure, xdg_toplevel.configure, xdg_popup.configure etc)
so that a configuration can be completed without having side effects on
other surfaces. This will be used to synchronously configure specific
GdkSurfaces, as is needed by the Gtk layout mechanisms.
The freezing is conditioned on various state, so lets make the thawing a
bit more robust. Without this there was a risk that we'd thaw too many
times if there was a frame callback requested while the conditions for
the freezing were not met.
Otherwise the compositor gets all confused when it's trying to make
drag happen but we know it's not going to happen.
After all, we exchange data behind its back, we just need to keep it
informed.
These don't take a duration, instead they call g_get_monotonic_time() to
and subtract the start time for it.
Almost all our calls are like this, and this makes the callsites clearer
and avoids inlining the clock call into the call site.
When we use if (GDK_PROFILER_IS_RUNNING) this means we get an
inlined if (FALSE) when the compiler support is not compiled in, which
gets rid of all the related code completely.
We also expand to G_UNLIKELY(gdk_profiler_is_running ()) in the supported
case which might cause somewhat better code generation.
usec is the scale of the monotonic timer which is where we get almost
all the times from. The only actual source of nsec is the opengl
GPU time (but who knows what the actual resulution of that is).
Changing this to usec allows us to get rid of " * 1000" in a *lot* of
places all over the codebase, which are ugly and confusing.
Copy just enough of libwayland-cursor to make our own
loading. This lets us drop the dependency on libwayland-cursor,
and changes the startup cost for cursor theme loading
from 25ms to 0.1ms.
At the same time, simplify the handling of scaled cursors -
instead of creating an array of theme objects, just make a
single theme object provide all scaled cursor sizes.
Add marks for when we do commits, swap buffer or
receive frame events. These are the low-level start
and end points of the frame cycle, and it is useful
to see them in the profiler.
We were always adding ASK to the list of possible
actions, and preferring it. This was causing the
ask cursor to show up when both the source and
the target support ASK, even though it is only
meant to happen if you hold the Alt modifier.
Instead, use one of the supported actions as
preferred action.
When creating a new GdkDrop object on drag_enter, take pending
source_actions and action into account. The code to store the
pending actions was already there, they were just not passed
on to the drop object when we create it.
We need to set the drag to NULL in gdk_wayland_drag_drop_done,
otherwise, all future drags will be considered local after the
first local one. Worse, they will also provide the wrong data.
We use a compilation symbol in our build to allow the inclusion of
specific headers while building GTK, to avoid the need to include only
the global header.
Each namespace has its own compilation symbol because we used to have
different libraries, and strict symbol visibility between libraries;
now that we have a single library, and we can use private symbols across
namespaces while building GTK, we should have a single compilation
symbol, and simplify the build rules.
The existing xdg-shell protocols do not support minimization in a way
that allows us to implement the GdkSurface API; the only minimization
operation does not come with a state notification, nor it comes with
a way to undo itself.
Closes: #67
The "iconified" state is mostly an X11-ism; every other platform calls
this state "minimized" because it may not involve turning a window into
an icon at all.
Using gsettings for this information does not work
in sandboxed scenarios, where settings are per-app.
Since the Wayland protocol provides this information
nowadays, just drop the old code for reading
the gsettings.
The event may end up freed after delivery, ensure to keep a ref in order
to emit the matching emulated crossed event matching a proximity event.
Closes: https://gitlab.gnome.org/GNOME/gtk/issues/2157
The code managing this accounting mixed seat and tablet output lists,
can't bode well. Fixes invalid reads on list elements, as there are
dangling pointers.
Closes: https://gitlab.gnome.org/GNOME/gtk/issues/2157
This is a requirement for using VK_KHR_incremental_present.
Vulkan Wayland drivers translate the VkPresentRegionsKHR to
wl_surface.damage_buffer(), which a v4-only request.
When calling gdk_wayland_surface_export_handle(), if we pass
some 'user_data' but no 'destroy_func', GTK4 crashes. That's
because in xdg_exported_handle() we are unconditionally calling
destroy_func -- even when it's NULL.
Fix that by checking if there's a destroy function before calling
it.
Fixes https://gitlab.gnome.org/GNOME/gtk/issues/2179
The xdg_output.done event is deprecated in xdg-output v3, so clients
need to rely on the wl_output.done event instead.
However, applying the changes on the fist wl_output.event when using
xdg-output v3 may lead to an incomplete change, as following xdg-output
updates may follow.
Make sure we apply xdg-output events on wl_output.done events with
xdg-output v3.
https://gitlab.gnome.org/GNOME/gtk/issues/2128
xdg-output v3 marks xdg-output.done as deprecated and compositors are
not required to send that event anymore.
So if the xdg-output version is 3 or higher, simply set the initial
value `xdg_output_done` to TRUE so we don't wait/expect that event
from the compositor.
https://gitlab.gnome.org/GNOME/gtk/issues/2053
Windows/surface's aren't supposed to be explicitly moved by any external
part, so don't provide API for doing so. Usage throughout Gdk is
replaced by the corresponding backend variants.
To separate how toplevels and popups are configured, a first step is to
introduce a resize-only vfunc for backends to implement. It's meant to
only configure toplevel windows, i.e. popups. Currently it's used for
both types, but introducing the resize-only API is a first step.
Configuration should happen in response to the xdg_surface.configure
event, not in the events that preceeds it. Do this by making all
configured state pending until the committing "configure" event. Also
split up toplevel vs popup configuration in a more clear way.
To make a frame clock tick as long as any of the associated surfaces
expect to receive ticks, make the surfaces inhibit freezing the clock,
instead of directly tell the frame clock to freeze itself.
This makes it so that as long as any surface using a certain frame clock
is not frozen (e.g. just received a frame event from the display
server), the frame clock will not be frozen.
With this, the frame clock is initiated as frozen, and won't be thawed
until any surface inhibits freeze. It will be frozen again, when every
surface has that previously inhibited freeze uninhibited freeze.
The xdg_output v2 interface has a `name` property that reflects the
output name coming from the compositor.
This is the closest thing we can get to a connector name.
The Wayland backend has a hack to work around
a race with popover mapping: If the surface size
changes before the initial configure, we hide and
show the surface. Unfortunately, the code was doing
this in a way that is externally observable (by
listening for surface state changes), and popovers
were observing it and hiding themselves in response.
Avoid this by not going through the GDK frontend
code for this.
With separate clocks, the phases are not coordinated,
which messes with GTKs size allocation machinery treating
the entire widget tree as a whole, and causes us to
run into assertion where popups get drawn before they
are allocated.
Store popup parents separately from transient-for
parents, since these are separate concepts with
different behaviors. And we need the parent in
the frontend, so we can use it in the fallback
move-to-rect implementation.
We don't need the complicated wrapper system anymore,
since client-side windows are gone. This commit moves
all the vfuncs to GtkSurfaceClass, and changes the
backends to just derive their surface implementation
from GdkSurface.
We want to use a gdk_surface_new_popup for popups,
and align the constructor names with the surface
types, so rename
gdk_surface_new_popup -> gdk_surface_new_temp
gdk_surface_new_popup_full -> gdk_surface_new_popup
The temp surface type will disappear eventually.