This will sometimes mean a frame is skipped if a resize was requested
during the update phase of the frame dispatch. Not doing so can cause
trying to allocate a window smaller than the minimum size of the widget.
If compute_size() returns TRUE, the layout will not be propagated to
GTK. This will be used by the X11 backend to queue asynchronous resizes
that shouldn't yet allocate in GTK.
Not doing this means the next time the same surface is shown, if the
shadow size wasn't changed, it wouldn't be sent to the compositor, which
then would result in compositor deriving its own window geometry which
would include the shadow margin.
This fixes an issue where the file chooser dialog would grow each time
it opened.
The allocation of popups are part dependent of the allocation of the
root, which means the root must still be allocated when updates are
frozen, otherwise we'll try to allocate non-laid out popups.
This removes the GDK_CONFIGURE event and all related functions and data
types; it includes untested changes to the MacOSX, Win32 and Broadway
backends.
This removes the gdk_surface_set_shadow_width() function and related
vfuncs. The point here is that the shadow width and surface size can now
be communicated to GDK atomically, meaning it's possible to avoid
intermediate stages where the surface size includes the shadow, but
without the shadow width set, or the other way around.
GTK4 doesn't support arbitrary constraints when resizing a window (e.g.
steps, or aspect ratio), so we don't need to care about the result from
compute-size when doing interactive resizing.
This follows the trail of the Wayland backend in that GdkSurface changes
happen during the layout phase, and that a GDK_CONFIGURE no longer being
used to communicate the size changes of a surface; this now also uses
the layout signal on the GdkSurface.
If a surface scheduled a relayout, got frozen, and a layout phase
happened, then got unfrozen, it wouldn't see it's layout being
requested; avoid this race by remembering the pending phases until they
actually happened.
Reading the comment, it seems to be related being a window manager
decoration utility; this is not something GTK4 aims to handle, just drop
support for this.
By moving popup layout emission to the layout phase, the current
GdkPopup::poup-layout-changed signal has no value on its own as it'd be
ignored by GtkPopover.
Make the Wayland backend communicate the popup layout changes via the
common signal; but leave the rest intact until other backends catch up.
Put them in a anonymous struct, and separate the toplevel specific ones
into another anonymous struct inside the first one. Later popup related
fields will be added.
Don't have GtkRoot listen directly to the layout signal on the frame
clock, but let it pass through GdkSurface. This will allow GdkSurface to
be more involved in the layout phase.
Scheduling an update when frozen would reschedule when unfrozen; change
this to a generic pending phase enum, and use this for resrcheduling
paint and compute-size.
GdkSurface's are initialized to have the size 1x1, as otherwise we'd
receive an X11 error, would a corresponding X11 window be created.
This confuses the "saved size" mechanisms in the Wayland backend, as
treats 0 as uninitialized, and not 1.
Fix this simply not saving size that if it's smaller or equal than 1.
This will be handled between 'update' (which may trigger animation
ticks, CSS update, etc) and 'layout' which will allocate the widget
tree. It's meant to perform surface size computation, and is done
between these two phases in order to have an up to date state, and
letting the layout phase have an up to date size to layout in.
Concentrate state application to the start of a frame; this is to avoid
having GTK going back and forth between different state if so would
happen between two frames.
Queue it, and then wait for it to actually take effect, i.e. be
confirmed via a configure event from the compositor, before setting the
actual GdkSurface::state value.
The plan is to concencrate size computations as part of the frame clock
dispatch, meaning we shouldn't do it synchronously in the present()
function.
Still, in Wayland, and maybe elsewhere, it is done in the present()
function, e.g. when no state change was made, but this will eventually
be changed.
Mapping a surface under Wayland is an asynchronous process, where one
creates a surface and commits an initial state without having drawn
anything, then waiting for a configuration, which then is acknowledged
and content is painted and committed. Not until having received this
configuration is a surface actually mapped, so wait with setting the
mappedness until this.
We don't need the OpenGL view to be transparent if the window itself
is not transparent. This has the potential to speed up the compositing
of the GL view onto the NSWindow.
This fixes an issue where we would ignore events with Y delta
and no X delta while scrolling due to a typo when checking for
any delta.
This fixes deceleration of kinetic scrolling on the macOS backend.
Fixes#3418
We need to keep this consistent so that we can look things up
faster in other places. Therefore, just take the hit here and clear
the entire list ensuring prev/next poniters are cleared.
The keycode and modifier (state) parameters are in the wrong order
for gdk_key_event_new() in the gdk win32 backend, which causes
key up/down events to be populated incorrectly.
This isn't done automatically for us, so we need to synthesize it in
our hide helper.
With this commit, we properly re-focus the new main/key window after
we have closed a transient-for window.
We need to re-attach to the transient-for window whenever we present or
we risk getting placed behind the window by the display server. Apparently
that setting does not persist across a hide of the NSWindow.
since http RFC state that the header names should be processed case in-sensitive, broadway should not rely on the actual case. E.g. the go-language libraries tend to rewrite the header, which cause problems with e.g. Caddy
Fixes#3406
In gdk/win32/gdkmonitor-win32.c in function
populate_monitor_devices_from_display_config() refresh->Numerator * 1000
overflows for refresh->Numerator > 4294976.
Cast the factor 1000 to UINT64 to prevent the overflow.
Fixes#3394
The use of volatile was incorrect in GLib and has been that way for
a long time. Recently however that has changed, and this makes GTK
follow suit to avoid using volatile in the type registration.
See also: https://gitlab.gnome.org/GNOME/glib/-/merge_requests/1719
Combined with the above merge request for GLib, this fixes a large
number of compilation warnings when using Clang.
Use the set_minimized method of the xdg_toplevel
interface to implement minimization as well as possible.
It is not possible, since there is no corresponding
state that we could use to update our surface state,
but in practice, it works well enough.
Fixes: #2688
This commit fix the warning:
../gdk/wayland/gdkdisplay-wayland.c:1079: Warning: GdkWayland: gdk_wayland_display_set_cursor_theme: unknown parameter 'name' in documentation comment, should be 'theme'
Currently GTK can be built with G_ENABLE_DEBUG which enables various debug code and parsing
of those env vars, or without, which instead of parsing them prints a warning if they are set.
While building with G_ENABLE_DEBUG isn't strictly needed it's the only way to make GTK_DEBUG=interactive work,
which is a nice thing to have always.
This enables parsing of those env vars in any case and allows specific values being marked as also
available when not built with G_ENABLE_DEBUG (interactive for example). If not built with G_ENABLE_DEBUG
then all unavailable values will be marked as such in the help output and a note is added that
GTK needs to be built with G_ENABLE_DEBUG to use them, which should help discoverability.
Once we figure out what is going on with textures, changes are we'll be
able to let this stay a zero rect. But that is still a bit up in the air right now.
When we close grabbing popups due to an outside
click, check at each level if the click is still
outside. This makes closing the nested popover
menu in the popover on page 3 of widget-factory
work as expected, when you click the menubutton
again.
When an event happens on a non-grabbing popup that hangs off
a grabbing popup, don't trigger the autohide. This makes touch
text handles work inside the popover on page 3 of widget-factory.
We can just call gdk_surface_invalidate_rect here
like we do elsewhere in gdk, and I'm a bit uncertain
about the current code that adds an empty update
region.
The Cairo implementation for the Macos backend uses a toplevel
window with full transparency and a series of NSView to create opaque
regions. This improves compositor performance because it allows the
display server to avoid costly blends.
However, we want to ensure we clip better when exposing the
transparent region so that we only expose the shadows/corners as
necessary.
This typedef was not used in any public APIs, and is
only used in the MacOS backend. It is not worth preserving
as public API, move it to the only user.
This implements the basics for a GdkGLContext on macOS. Currently, rendering
only is fully working for the GskCairoRenderer case where we read back pixels
into a cairo surface for rendering. More work on synchronization is required for
the GL on GskGLRenderer case.
When we attempt to render a surface itself with GL, the context will ensure that
the new GdkMacosGLView is placed within the NSWindow. In other cases, we
use a dummy NSView and NSWindow for backing the NSOpenGLContext to
ensure that we can get accelerated drawing.
This gets GtkGLArea working when running with GSK_RENDERER=cairo.
This helps a situation where the window contents has not changed
in time for a drawing. Setting the texture gravity helps that side or
corner to be less jittery while moving.
Ideally, we can get to a point where we are synchronized and keeping
up with drawing fast enough to not need this. That may require some
work to drive frame clocks from drawRect: though.
The current code was marking queued events as flushed,
but left them in the queue. That doesn't make sense to
me - we should deliver all events we have before we
reach the paint phase of the frame cycle.
GLDEBUGPROC callback is defined with APIENTRY which is a windows
specific calling convention. That macro expands to nothing when building
on other platforms.
Fixes: #3268.
Call SetCapture() explcitly for the (new) modal window so that we make the
modal window respond to mouse input, and also call SetCapture() to the parent
of the transient window that we are destroying so that mouse input capture is
returned to the parent window.
This attempts to fix the following:
* Upon creating a new modal window, the new modal window does not receive
pointer input unless one switches to another program and back
* Upon closing a transient window, the parent window that activated the
transient window does not receive pointer input unless one switches to
another and back
This reverts commit fc2008f2.
Turns out, we *don't* have code to maintain Z-order. Restacking
code is not doint that, it just enforces a few weird Z-order-related
behaviours.
Make sure that we get the state of the modal window properly, and send out the
corresponding notification signals.
This will ensure that we do not try to activate windows that should have become
inactivated due to it opening modal windows and render the program unresponsive
because we are not activating the correct window that is due to receive user
input.
