The xdg_output.done event is deprecated in xdg-output v3, so clients
need to rely on the wl_output.done event instead.
However, applying the changes on the fist wl_output.event when using
xdg-output v3 may lead to an incomplete change, as following xdg-output
updates may follow.
Make sure we apply xdg-output events on wl_output.done events with
xdg-output v3.
https://gitlab.gnome.org/GNOME/gtk/issues/2128
Previously, the manufacturer property of the GdkMonitor was NULL,
and having at least PNP id at GdkMonitor.manufacturer makes it
possible to distinguish between different monitors programmatically.
xdg-output v3 marks xdg-output.done as deprecated and compositors are
not required to send that event anymore.
So if the xdg-output version is 3 or higher, simply set the initial
value `xdg_output_done` to TRUE so we don't wait/expect that event
from the compositor.
https://gitlab.gnome.org/GNOME/gtk/issues/2053
Windows/surface's aren't supposed to be explicitly moved by any external
part, so don't provide API for doing so. Usage throughout Gdk is
replaced by the corresponding backend variants.
The generic layer still does the heavy lifting, leaving the backends
more or less just act as thin wrappers, dealing a bit with global
coordinate transformations. The end goal is to remove explicit surface
moving from the generic gdk layer.
To separate how toplevels and popups are configured, a first step is to
introduce a resize-only vfunc for backends to implement. It's meant to
only configure toplevel windows, i.e. popups. Currently it's used for
both types, but introducing the resize-only API is a first step.
Configuration should happen in response to the xdg_surface.configure
event, not in the events that preceeds it. Do this by making all
configured state pending until the committing "configure" event. Also
split up toplevel vs popup configuration in a more clear way.
When unreffing the stream from a different thread, the close function
will schedule its cleanup asynchornously in the main thread.
We need to make sure the stream object stays alive for as long as
that hasn't happened, so ref() it.
Fixes#2003
Instead of the toplevel driving popups, have the popups listen to the
frame clock themselves. Otherwise, if the toplevel for some reason isn't
drawn by the compositor and stops drawing new frames, popups wouldn't
get painted either.
To make a frame clock tick as long as any of the associated surfaces
expect to receive ticks, make the surfaces inhibit freezing the clock,
instead of directly tell the frame clock to freeze itself.
This makes it so that as long as any surface using a certain frame clock
is not frozen (e.g. just received a frame event from the display
server), the frame clock will not be frozen.
With this, the frame clock is initiated as frozen, and won't be thawed
until any surface inhibits freeze. It will be frozen again, when every
surface has that previously inhibited freeze uninhibited freeze.
The xdg_output v2 interface has a `name` property that reflects the
output name coming from the compositor.
This is the closest thing we can get to a connector name.
The migration from GdkScreen's monitor API to GdkMonitor left out a way
to get the connector's name of a monitor.
While there's no real guarantee coming from the underlying graphics
system that the connector's name is stable, some system components may
use it to uniquely identify a monitor until the next plug in/out event.
This gives us marks to track the duration of processing certain types of
GdkEvent. It also provides some basic struct information in cases where
having that information would likely be useful for debugging.
The Wayland backend has a hack to work around
a race with popover mapping: If the surface size
changes before the initial configure, we hide and
show the surface. Unfortunately, the code was doing
this in a way that is externally observable (by
listening for surface state changes), and popovers
were observing it and hiding themselves in response.
Avoid this by not going through the GDK frontend
code for this.
1) In the SetWindowPos() function (and the WINDOWPOS struct) the
"hWndInsertAfter" argument/field means the window that will be
directly above after the change, not the window that will be
directly below. MSDN says "precedes" for SetWindowPos(), but
WINDOWPOS documentation is more precise: this is the window
behind which the affected window will be placed. Apparently,
Z-axis goes back-to-front.
Therefore, logging should be reworded correctly.
2) When we switch away from the application and then switch back
to a transient window, we need to bring up its transient-owner
(and its transient-owner's owner and so forth) as well,
otherwise our transient (modal) window might be transient for
something that might not be visible.
3) When we bring up a window, we should bring all of its children
(popup windows) on top of it.
Because Windows doesn't provide a function to bring one window
on top of the other, we have to work around this by calling
SetWindowPos() twice, swapping the windows between the calls.
Similar to previous removals of g_cclosure_marshal_VOID__VOID we can remove
other marshallers for which are a simple G_TYPE_NONE with single parameter.
In those cases, GLib will setup both a c_marshaller and va_marshaller for
us. Before this commit, we would not get a va_marshaller because the
c_marshaller is set.
Related to GNOME/Initiatives#10
This uses the new sysprof-3 ABI to implement the capture writer. It also
uses the statically linked libsysprof-capture-3.a that is provided with
Sysprof for the capture writing to ensure that we do not leak any symbols
nor depend on any additional libraries.
The GTK_TRACE_FD can be used to pass a FD for tracing into Gtk. Sysprof
uses this when the Gtk instrument is selected for recording.
If we set c_marshaller manually, then g_signal_newv() will not setup a
va_marshaller for us. However, if we provide c_marshaller as NULL, it will
setup both the c_marshaller (to g_cclosure_marshal_VOID__VOID) and
va_marshaller (to g_cclosure_marshal_VOID__VOIDv) for us.
Root coordinates are going away, so this
api does not make sense anymore. Use
gdk_surface_get_device_position instead.
We still keep this as internal api for
root-coordinate using backends.
The X backend was storing global coordinates
in surface->x/y, and keeping the parent-relative
positions in its own fields. Switch this around
to store the relative position in x/y, as is
expected by the frontend.
This function returns the position relative to
the surface parent, so will always return 0 for
non-popups. The out arguments don't need to
allow-none either - nobody passes NULL for these.
We maintain offsets for popups, so we can translate
coordinates between surfaces that are attached directly
or indirectly to the same toplevel. Add an api for that.
CSS does not do exponents, so printing numbers close to 0 as 1.234e-15
does not work.
Also up the accuracy to 17 digits because that's what everyone else
uses.
GTK4 doesn't have WS_CHILD windows anymore, so hWndParent argument
to CreateWindowEx() is always interpreted as the owner window,
not the parent window.
A window with an owner:
* is above the owner in Z-order
* is destroyed when the owner is destroyed
* is hidden when the owner is minimized
This is enforced by the OS.
GTK can only allow this for popup windows.
Desktop window must never[0] be an owner.
[0]: https://devblogs.microsoft.com/oldnewthing/20040224-00/?p=40493
Popups can't be active or inactive, so emitting GDK events
in response to WM_ACTIVATE makes no sense for these kinds
of GDK surfaces.
The jury is still out on whether we should block (return 0)
or ignore (don't return anything) this message.
Blocking WM_NCACTIVATE (which we currently ignore) is definitely
not an option - it completely breaks input somehow.
1) Handle GDK_SURFACE_POPUP in RegisterGdkClass()
(for now pretend it's the same as GDK_SURFACE_TOPLEVEL)
2) Remove useless code from GDK_SURFACE_TOPLEVEL case in _gdk_win32_display_create_surface()
(now there's just GDK_SURFACE_TOPLEVEL there, no need for a type check)
3) Have a separate case for GDK_SURFACE_POPUP and ensure that
it doesn't get WS_CHILDWINDOW (and neither should GDK_SURFACE_TEMP).
There is no need for popups to connect to the frame
clock to pause and unpause events on the display -
the toplevel already does it.
And don't connect to paint either - handle paint
on popups recursively.
Somewhat change the order of initialization (to be closer
to what Wayland backend does).
Also remove the wrapper field that is no longer needed -
it used to hold a pointer to the main GdkWindow instance,
which wrapped GdkWin32ImplWindow. Since impls are gone,
nothing is wrapping anything anymore.
Fix a substitution error, where wrong pointer was added
to the hash table. Added a comment to ensure that future readers
(including myself) won't be confused by the fact that we're
inserting a pointer instead of the handle itself.
Since we are now sharing frame clocks with multiple
surfaces, we can no longer dispose them unconditionally
when a surface goes away. Only do it if we are a
toplevel (without parent).
This was showing up as criticals on exit when opening
and closing any popover in widget factory.
Now that popups share the frame clock of their
parent, we have to be much more careful about
freezing the clock, since that may stop updates
for another surface.
This commit makes two changes that make the
X11 handling of the frame clock more similar
to the Wayland backend:
- Use gdk_surface_freeze_updates instead of
gdk_surface_freeze_toplevel_updates to avoid
affecting the frame clock
- Bail out early in before_paint/after_paint
if the surface is frozen, to avoid affecting
the frame clock
Together, these two make the X11 popup surface
type work without freezing updates for the toplevel.
With separate clocks, the phases are not coordinated,
which messes with GTKs size allocation machinery treating
the entire widget tree as a whole, and causes us to
run into assertion where popups get drawn before they
are allocated.
This api is meant to mimic xdg-popover.grab - we
show the surface, and dismiss it when we get events
on other surfaces. For foreign surfaces, the compositor
handles that for us; for our own, we check outselves
before delivering events to GTK.
Make them use o-r windows, and move
with their parent.
We do a sort-of ok job on stacking order
here - whenever the parent window gets a
ConfigureNotify, we just restack all popups
directly on top of their parent. This is good
enough to keep popups on top of their parent
while we drag it around, and it gets the popup
to disappear when raising another window on
top of the parent.
Store popup parents separately from transient-for
parents, since these are separate concepts with
different behaviors. And we need the parent in
the frontend, so we can use it in the fallback
move-to-rect implementation.
We don't need the complicated wrapper system anymore,
since client-side windows are gone. This commit moves
all the vfuncs to GtkSurfaceClass, and changes the
backends to just derive their surface implementation
from GdkSurface.
We want to use a gdk_surface_new_popup for popups,
and align the constructor names with the surface
types, so rename
gdk_surface_new_popup -> gdk_surface_new_temp
gdk_surface_new_popup_full -> gdk_surface_new_popup
The temp surface type will disappear eventually.
All the information in it is already contained
in the surface object we pass along, and none
of the backend implementations were using the
attributes at all.
We are not creating such surfaces anymore, and
they were only ever meaningfully implemented
on X11. Drop the concept, and the api for determining
if a surface is input-only.
We still need to keep the vfunc around, since the
fallback implementation of gdk_display_get_monitor_at_surface
uses it. So, a GDK backend must either have root coordinates
or always return a monitor from monitor_at_surface.
We still need to keep the vfunc around, since the
fallback implementation for move_to_rect uses it.
So, a GDK backend must either have root coordinates
or implement move_to_rect.
Start by adding a constructor. We have to call it
gdk_surface_new_popup_full for now, since gdk_surface_new_popup
is taken. This may be reshuffled later.
The “xdg-output” protocol provides clients with the outputs size and
position in compositor coordinates, and does not provide the output
scale which is already provided by the core “wl_output” protocol.
So when receiving the wl_output scale event, we should update the scale
regardless of “xdg-output” support, otherwise the scale will remain to
its default value of 1 and the surface will be scaled up by the
compositor to match the actual output scale, which causes blurry fonts
and widgets.
Fixes: https://gitlab.gnome.org/GNOME/gtk/issues/1901
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
The change to keep some server resources around
until destroy was causing us to not recreate
the right things when a surface is hidden and
then shown again. Make sure to recreate everything.
The Wayland backend was dropping _all_ serverside
resources on hide, which is too early e.g. for
GtkGLArea which wants to use egl resources to
unload textures on unrealize.
Closes: https://gitlab.gnome.org/GNOME/gtk/issues/1485
We need to store the region *before* adding our own damage area, because
we want to only store the changes of this frame, not the whole history.
So do it in the same place Vulkan does it.
Fixes#1900
We were adding incomplete frame timings to the
profile, which lead to occasional nonsense
numbers. Instead, only add timings to the profile
once we marked them as complete. This also
gives us an opportunity to add the presentation
time as a marker.
Besides requiring it at build time, require that the server the client
is running against exposes the XInput2 protocol. We no longer fallback
on a device manager for core events.
XInput2 is more than a decade old already, and the input improvements
there (and in every other backend really) make it untenable to have
support for X11 core input events dragging things behind.
GdkSurface::set_startup_id() is NULL on Win32 and would cause a segfault
if called.
While the documentation of the main caller of set_startup_id(),
gtk_window_set_startup_id(), mentions that it's not implemented on
Windows it can still be automatically called via Glade and simply doing
nothing on Win32 is going to be less disruptive than a segfault.
If SYSPROF_TRACE_FD is set in the environment,
interpret it as an fd to write profiling data
to.
If GTK_TRACE is set, write profiling data
to a file with name gtk.$PID.syscap.
This is writing data in the capture format of sysprof,
using the SpCaptureWriter. For now, this is using a
vendored copy of libsysprof. Eventually, we want to
use the static library that sysprof provides.
apis that takes multiple display-relative objects
should make sure that they are all from the same
display, or hard-to-track-down badness will happen
later on.
Add such a check for the surface and device arguments
of gdk_seat_grab. This helped in tracking down
critical warnings from combo boxes in the inspector.
Now that GdkSurface has properties, it makes
sense to turn the frame clock into one too.
This will make it easier to reshuffle some
of the surface constructors later.
Make find_grab_input_seat return a GdkWaylandSeat
instead of a struct wl_seat, so we can use it and
avoid calling gdk_display_get_default_seat when
we need to get a serial later.
Save the information whether the cursor in use is the default one, and
don't create a new cursor object in that case.
We previously created a new cursor object every frame just to compare it
to the current cursor in use and then throw it away.
The skip-taskbar, skip-pager and urgency hints were
only ever implemented for X11, and are not very useful
with modern desktops. Relegate the functionality to
x11 backend api, and drop the GtkWindow api.
And update the surface accordingly (eg. scale on hidpi). The mechanism
that did that for wl_pointer has been made generic so it can be shared
with tablets too.
Closes: https://gitlab.gnome.org/GNOME/gtk/issues/1675
_gdk_wayland_cursor_get_buffer was not initializing
its out variables in the 'not found' case. This
was showing up in protocol traces as garbage hotspots
being sent to the compositor.
Closes: https://gitlab.gnome.org/GNOME/gtk/issues/1328
Previously, the GDK backend for Wayland would deduce the logical size
of the monitors from the wl_output size and scale.
With the addition of fractional scaling which advertises a larger scale
value and then scale down the client surface, the computed logical size
of the monitors in GDK would be wrong and confuse applications which
insist on using the monitor size and position (like Firefox).
The xdg-output protocol aims at describing outputs in a way which is more
in line with the concept of an output on desktop oriented systems by
presenting the outputs using their logical size and position appropriately
transformed.
Add support for the optional xdg-output protocol so that the size and
position of the monitors as reported by GDK is correct even when using
fractional scaling.
Fixes: https://gitlab.gnome.org/GNOME/gtk/issues/1828
This function is a (private) function to parse a GdkRGBA accoridng to
the CSS specs. We should probably use it for gdk_rgba_parse(), but that
would change the syntax we accept there...
This also introduces a dependency of libgdk on libgtkcss.
So far, no users for this function exist.
This library is meant to be the new CSS library that gets used from GDK,
GSK and GTK for string printing and parsing.
As a first step, move GtkCssProviderError into it.
While doing so, split it into GtkCssParserError (for critical problems)
and GtkCssParserWarning (for non-critical problems).
Since commit 3b2f9395, the frame time may be set into the future, so
only ensure monotonicity, and don't store the offset. This prevents the
frame time from becoming out of sync with g_get_monotonic_time().
Fixes#1612
