12 KiB
Title: Compiling the GTK Libraries Slug: gtk-building
Building GTK
Before we get into the details of how to compile GTK, we should mention that in many cases, binary packages of GTK prebuilt for your operating system will be available, either from your operating system vendor or from independent sources. If such a set of packages is available, installing it will get you programming with GTK much faster than building it yourself. In fact, you may well already have GTK installed on your system already.
In order to build GTK, you will need meson installed on your system. On Linux, and other UNIX-like operating systems, you will also need ninja. This guide does not cover how to install these two requirements, but you can refer to the Meson website for more information. The Ninja build tool is also usable on various operating systems, so we will refer to it in the examples.
If you are building GTK from a source distribution or from a Git
clone, you will need to use meson to configure the project. The
most commonly useful argument is the --prefix
one, which determines
where the files will go once installed. To install GTK under a prefix
like /opt/gtk
you would run Meson as:
meson setup --prefix /opt/gtk builddir
Meson will create the builddir
directory and place all the build
artefacts there.
You can get a list of all available options for the build by
running meson configure
.
After Meson successfully configured the build directory, you then can run the build, using Ninja:
cd builddir
ninja
ninja install
If you don't have permission to write to the directory you are
installing in, you may have to change to root temporarily before
running ninja install
.
Several environment variables are useful to pass to set before
running meson. CPPFLAGS
contains options to pass to the C
compiler, and is used to tell the compiler where to look for
include files. The LDFLAGS
variable is used in a similar fashion
for the linker. Finally the PKG_CONFIG_PATH
environment variable
contains a search path that pkg-config
(see below) uses when
looking for files describing how to compile programs using different
libraries. If you were installing GTK and it's dependencies into
/opt/gtk
, you might want to set these variables as:
CPPFLAGS="-I/opt/gtk/include"
LDFLAGS="-L/opt/gtk/lib"
PKG_CONFIG_PATH="/opt/gtk/lib/pkgconfig"
export CPPFLAGS LDFLAGS PKG_CONFIG_PATH
You may also need to set the LD_LIBRARY_PATH
environment variable
so the systems dynamic linker can find the newly installed libraries,
and the PATH
environment program so that utility binaries installed
by the various libraries will be found.
LD_LIBRARY_PATH="/opt/gtk/lib"
PATH="/opt/gtk/bin:$PATH"
export LD_LIBRARY_PATH PATH
Build types
Meson has different build types, exposed by the buildtype
configuration option. GTK enables and disables functionality
depending on the build type used when calling meson to
configure the build.
Debug builds
GTK will enable debugging code paths in both the debug
and
debugoptimized
build types. Builds with buildtype
set to
debug
will additionally enable consistency checks on the
internal state of the toolkit.
It is recommended to use the debug
or debugoptimized
build
types when developing GTK itself. Additionally, debug
builds of
GTK are recommended for profiling and debugging GTK applications,
as they include additional validation of the internal state.
The debugoptimized
build type is the default for GTK if no build
type is specified when calling meson.
Release builds
The release
build type will disable debugging code paths and
additional run time safeties, like checked casts for object
instances.
The plain
build type provided by Meson should only be used when
packaging GTK, and it's expected that packagers will provide their
own compiler flags when building GTK. See the previous section for
the list of environment variables to be used to define compiler and
linker flags. Note that with the plain build type, you are also
responsible for controlling the debugging features of GTK with
-DG_ENABLE_DEBUG
and -DG_DISABLE_CAST_CHECKS
.
Dependencies
Before you can compile the GTK widget toolkit, you need to have various other tools and libraries installed on your system. Dependencies of GTK have their own build systems, so you will need to refer to their own installation instructions.
A particular important tool used by GTK to find its dependencies
is pkg-config
.
pkg-config
is a tool for tracking the compilation flags needed for libraries
that are used by the GTK libraries. (For each library, a small .pc
text file is installed in a standard location that contains the
compilation flags needed for that library along with version number
information.)
Some of the libraries that GTK depends on are maintained by the GTK team: GLib, GdkPixbuf, Pango, and GObject Introspection. Other libraries are maintained separately.
- The GLib library provides core non-graphical functionality such as high level data types, Unicode manipulation, and an object and type system to C programs. It is available from here.
- The GdkPixbuf library provides facilities for loading images in a variety of file formats. It is available here.
- Pango is a library for internationalized text handling. It is available here.
- GObject Introspection is a framework for making introspection data available to language bindings. It is available here.
- The GNU libiconv library is needed to build GLib if your system doesn't have the iconv() function for doing conversion between character encodings. Most modern systems should have iconv().
- The libintl library from the GNU gettext package is needed if your system doesn't have the gettext() functionality for handling message translation databases.
- The libraries from the X window system are needed to build Pango and GTK. You should already have these installed on your system, but it's possible that you'll need to install the development environment for these libraries that your operating system vendor provides.
- The fontconfig library provides Pango with a standard way of locating fonts and matching them against font names.
- Cairo is a graphics library that supports vector graphics and image compositing. Both Pango and GTK use Cairo for drawing. Note that we also need the auxiliary cairo-gobject library.
- libepoxy is a library that abstracts the differences between different OpenGL libraries. GTK uses it for cross-platform GL support and for its own drawing.
- Graphene is a library that provides vector and matrix types for 2D and 3D transformations. GTK uses it internally for drawing.
- The Wayland libraries are needed to build GTK with the Wayland backend.
- The shared-mime-info
package is not a hard dependency of GTK, but it contains definitions
for mime types that are used by GIO and, indirectly, by GTK.
gdk-pixbuf will use GIO for mime type detection if possible.
For this to work, shared-mime-info needs to be installed and
XDG_DATA_DIRS
set accordingly at configure time. Otherwise, gdk-pixbuf falls back to its built-in mime type detection.
Building and testing GTK
First make sure that you have the necessary external
dependencies installed: pkg-config
, Meson, Ninja,
the JPEG, PNG, and TIFF libraries, FreeType, and, if necessary,
libiconv and libintl. To get detailed information about building
these packages, see the documentation provided with the
individual packages. On any average Linux system, it's quite likely
you'll have all of these installed already, or they will be easily
accessible through your operating system package repositories.
Then build and install the GTK libraries in the order:
GLib, Cairo, Pango, then GTK. For each library, follow the
instructions they provide, and make sure to share common settings
between them and the GTK build; if you are using a separate prefix
for GTK, for instance, you will need to use the same prefix for
all its dependencies you build. If you're lucky, this will all go
smoothly, and you'll be ready to start compiling your own GTK
applications. You can test your GTK installation
by running the gtk4-demo
program that GTK installs.
If one of the projects you're configuring or building fails, look closely at the error messages printed; these will often provide useful information as to what went wrong. Every build system has its own log that can help you understand the issue you're encountering. If all else fails, you can ask for help on the GTK forums.
Extra Configuration Options
In addition to the normal options provided by Meson, GTK defines various
arguments that modify what should be built. All of these options are passed
to meson
as -Doption=value
. Most of the time, the value can be true
or
false
, or enabled
, disabled
or auto
.
To see a summary of all supported options and their allowed values, run
meson configure builddir
x11-backend
, win32-backend
, broadway-backend
, wayland-backend
and macos-backend
Enable specific backends for GDK. If none of these options are given, the Wayland backend will be enabled by default, if the platform is Linux; the X11 backend will also be enabled by default, unless the platform is Windows, in which case the default is win32, or the platform is macOS, in which case the default is macOS. If any backend is explicitly enabled or disabled, no other platform will be enabled automatically.
vulkan
By default, GTK will try to build with support for the Vulkan graphics API in addition to cairo and OpenGL. This option can be used to explicitly control whether Vulkan should be used.
xinerama
By default, GTK will try to link against the Xinerama libraries if they are found. This option can be used to explicitly control whether Xinerama should be used.
media
By default, GTK will try to build the gstreamer backend for media playback support. This option can be used to explicitly control which media backends should be built.
print
By default, GTK will try to build various print backends if their dependencies are found. This option can be used to explicitly control which print backends should be built.
cloudproviders
This option controls whether GTK should use libcloudproviders for supporting various Cloud storage APIs in the file chooser.
sysprof
This option controls whether GTK should include support for tracing with sysprof.
tracker
This option controls whether GTK should use Tracker for search support in the file chooser.
colord
This option controls whether GTK should use colord for color calibration support in the cups print backend.
gtk_doc
and man-pages
The gtk-doc package is used to generate the reference documentation
included with GTK. By default support for gtk-doc is disabled
because it requires various extra dependencies to be installed.
If you have gtk-doc and pandoc installed and are modifying GTK,
you may want to enable gtk-doc support by passing in -Dgtk_doc=true
.
Additionally, some tools provided by GTK have their own
manual pages generated using a similar set of dependencies;
if you have xsltproc then you can generate manual pages by
passing -Dman-pages=true
when configuring the build.
introspection
Allows to disable building introspection support. This is option is mainly useful for shortening turnaround times on developer systems. Installed builds of GTK should always have introspection support.
build-tests
, install-tests
, demos
By default, GTK will build quite a few tests and demos. While these are useful on a developer system, they are not needed when GTK is built e.g. for a flatpak runtime. These options allow to disable building tests and demos.