Gives it its own changed signal, and simplifies setting from group,
while fixing an inconsistency in propagation.
Change-Id: I22b243210260a8878144fa4b60204df46f847f37
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The qdoc-file that contains the example documentation was
left behind when the OpenGL code moved from QtGui
to QtOpenGL. This causes all the snippet commands to fail.
Task-number: QTBUG-74409
Change-Id: I86a753d4fc832965e76a085062882e6c720becd2
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
This reverts commit c7ec07d401.
Reason for revert: This causes a memory leak on program termination.
The initial commit was an attempt to fix a deadlock where the user
destroys object from a thread that does not own the object. This is
an unsupported case and should be treated as an invalid report.
Pick-to: 5.15
Change-Id: I4957784b86a0361adb65b9d023542f96480f00ba
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
It really could only manifest itself if you started a request and then
immediately cancelled it and then started another one to the same
site. But only if in a certain race outcome - the connection that the
backend was establishing had to finish connecting after aborting but
before a new request had been queued!
Change-Id: I7cad2cf4ac1f64cc838498cefa076cd2c6d26701
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Mostly related to qstrlen().
Change-Id: I69e2052c83766e4fc466ed398d0d0eac011a77ec
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Address a ### Qt6 comment from change
283008e123, and start using
QStyledItemDelegate in more places, so those get proper
look and feel.
Change-Id: I39767ba99b7942faada1fba0ac241deb35563b63
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
I still have doubts that QEventPoint can't be made small enough that
copying would be cheaper than reference-counting and all the indirections
in now-noninline accessors, but this gives us the usual freedom to
change the data members later on.
Change-Id: I792f7fc85ac3a9538589da9d7618b647edf0e70c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Before, we used not so accurate QTest::qWait(50)
to measure the accuracy of more precise timer's interval.
In addition, the checked range for remainingTime (50, 200)
was probably wrong, since by definition it couldn't be more than 150,
as we started the timer with interval of 200 and waited at least 50.
In this fix we have additional "tester" timer to measure remainingTime
of "tested" timer. The "tester" is a singleShot timer with interval of
50, and is started together with "tested" timer. Whenever the "tested"
timer timeouts, it restarts the "tester" timer - this is done desired
number of times (2 by default, like in the original test).
The test itself lies now inside tester's lambda. We fix the tested
range (at least 1, no more than 150). The minimum value could in
theory be greater, but it's enough to test that it's not overdue.
Finally, we wait for expected number of test runs. We give it twice
as much time as is in theory needed.
Task-number: QTBUG-83419
Task-number: QTBUG-58519
Change-Id: I43836d787d804f22bb66515ebb215d040189c4f3
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
While it's possible to instantiate safe_delete using a nullptr, the
check in if-statement is 99.9(9) % of time redundant and equal
to if (true && object). Some compilers will issue a compilation
error (if warnings are treated as errors for example).
Change-Id: Ib593dc53deb6d2e4b77ea5c896610dc536c61b7c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
I accidentally noticed the message in a CI job, but it didn't fail the
build because the FATAL_ERRO was considered as another text token to
print, instead of a command keyword.
Change-Id: I0e30ebacbed32d1017f9ded681cd6b15cbc32573
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The qt_build_internals_disable_pkg_config_if_needed function didn't
actually check if the pkg-config executable is available when turning
the pkg-config feature on.
This broke certain configurations like Android (on some hosts).
Try to find the executable and take that into account when computing
the value of the feature.
Task-number: QTBUG-85399
Change-Id: Ie79c637f2d2b689c392862c90075d309906fe506
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The generated toolchain file embedded windows style paths for the
android sdk and chainloaded toolchain. This caused CMake does fail at
configure time while trying to evaluate backslashes as escape chars.
Also syncqt was searched for in libexec, which is not the right
directory on Windows. Use the host info package to get the location of
the 'libexec'.
Task-number: QTBUG-85399
Task-number: QTBUG-85911
Task-number: QTBUG-86053
Change-Id: I1b15ce84496d52c3fda2f65138e1eac43bc95c9e
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Rather than force setting the apple sysroot and Qt host paths, first
check if they are not already defined on the command line and if they
aren't, check that the paths with which Qt was configured exist.
The goal of the patch is to not set invalid paths, like when using a
Qt built in the CI, which will have a different host path / sysroot
compared to what a user has locally.
Task-number: QTBUG-85240
Change-Id: Ic37566b4fa845d8d1b4e4b5ba7fa4be769e99ca8
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Using find_library() to find an Xcode framework will end up embedding
the absolute path of the framework into INTERFACE_LINK_LIBRARIES.
A different machine might not have the SDK installed in the same
location, which will cause build failures. This happens in our CI
because Xcode is installed to /Applications/Xcode11.app.
To fix this, replace all system framework paths with
'-framework Foo' flags instead.
We already do this for OpenGL and OpenGL ES.
In the future we might want to convert these into full standalone
FindFoo scripts that expose proper targets.
Fixes: QTBUG-86299
Task-number: QTBUG-86422
Task-number: QTBUG-85240
Change-Id: I22b2b2d1d9e92108098d3974105e3758978cd8e2
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
It flaky fails for both normal and reverse cases.
Pick-to: 5.15
Task-number: QTBUG-41341
Change-Id: If6ecd6dc58f131bb67d46a5d508f59b6bb0fd962
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
[ChangeLog][Source-Incompatible Changes] QProcess::setupChildProcess()
was removed. To execute code in a child process, use
QProcess::setChildProcessModifier()
[ChangeLog][QtCore][QProcess] Added setChildProcessModifier() function
with which one can provide code to be run in the Unix child process
between fork() and execve(). With this function, it is no longer
necessary to derive from QProcess in order to execute actions in the
child process.
Another reason is that we can tell whether the std::function carries a
valid target much more easily than we can tell whether QProcess was
overridden.
The setupChildProcess() virtual function does not need to be marked
final, since no overrider could ever return an inaccessible private
class. This also makes sure the error presented to the user is about the
return type, not about attempting to override a final.
Clang:
error: virtual function 'f' has a different return type ('void') than the function it overrides (which has return type 'QProcess::Use_setChildProcessModifier_Instead')
GCC:
error: conflicting return type specified for 'virtual void MyProcess::setupChildProcess()'
note: overridden function is 'virtual QProcess::Use_setChildProcessModifier_Instead QProcess::setupChildProcess()'
ICC:
error: return type is neither identical to nor covariant with return type "QProcess::Use_setChildProcessModifier_Instead" of overridden virtual function "QProcess::setupChildProcess"
MSVC is not relevant since it doesn't compile to Unix.
Change-Id: Ia8b65350cd5d49debca9fffd15f801161363aea7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
We don't support older compilers from before they accepted
the architecture codenames.
Change-Id: If13a10ed95b34007858bfffd1631a08b425fa9c3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This was added for Qt 5 in 780137d585 but
apparently the change was never ported over to CMake.
Fixes: QTBUG-86452
Change-Id: If13a10ed95b34007858bfffd1631a084370a3232
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The implementation can be more efficient with two 32-bit fields instead
of just one, but it depends on whether operations on 64-bit atomics are
locked or not.
Quick check for the following architectures does not reveal any
problems, but someone needs to investigate more. Notably, GCC and Clang
generate a call to libatomic's __atomic_load_n / __atomic_store_n / etc.
32-bit std::atomic<uint64_t>
Arch ::is_always_lock_free .is_lock_free()
ARMv7-A false true
i386 false true
MIPS false true
PPC false true
RISC-V false true
SPARC false true
Change-Id: Ia2273af1172d493092d6fffd163251a99064c51b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This reverts commit ff69227a49.
Reason for revert: 64-bit atomics on 32-bit systems are often
(but not always) worse than the 32-bit semaphore as it was
implemented. Plus the High32 and Low32 functions are returning
the same thing, forgetting the endianness check.
Change-Id: I5d5ade6e9bc7086600ff2302546385151e32142b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Android 11's SELinux rules block the RTM_GETLINK requests that
qnetworkinterface_linux.cpp needs to make. So disable this completely
and fall back on the older rimplementation. Bionic has some workarounds
in their getifaddrs() implementation to make this work.
Fixes: QTBUG-86394
Pick-to: 5.15 5.15.1
Change-Id: I87447a0ecdee4dc7b506fffd163180c2b1db7835
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
... and the associated enumeration.
Using them is almost always a certain mistake.
1) op+ between two enumerators of the same enumeration yields int,
not QFlags, so removing the type safety that QFlags is supposed to
give and breaking the semantics of bitwise operations.
2) op+ between two enumerators of different enumerations is
deprecated in C++20 (already flagged by GCC10), and again yields
int. This is a code smell. Dedicated classes (holding a combination
of unrelated enums) should be used instead.
3) op+ between an enumerator and its QFlags loses the semantic
meaning of bitwise operations. If the real meaning was to use
operator|, then use that instead; operator+ hides the intent,
and can introduce bugs by creating a result not expressible via
OR combinations of enumerators:
enum E { A = 0x01, B = 0x02 };
QFlags<E> f = E::A;
f + E::A; // ???
f + E::B; // ???
Identical reasoning applies for operator-. Technically the
other arithmetic operators could be disabled as well, but I
really don't expect any real-world usage for them.
This has spotted bugs in Qt.
[ChangeLog][Potentially Source-Incompatible Changes][QFlags] Using
operator+ or operator- with a QFlags object or with an enumeration
that has a corresponding QFlags object will now result in a
compile-time error, because it's a generally unsafe operation.
Use the proper bitwise operations instead (|, &, ~); or cast
the enumeration to a integral type before attempting arithmetic
manipulations on it.
Change-Id: I5eabc5195dec3d3082bc9da10dbc8cf5dff3e1eb
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QDateTime::toString uses the C locale since 5ba66c5622
So don't expect locale specific day- and month-names.
Task-number: QTBUG-80441
Change-Id: I08f53b6b33ed9e7eaaa58df4ca6a966c4ba9ef24
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Change QWindowsWindow::format() to return the QWindow's requested
format instead of storing it as do the other platforms. This will
cause the alpha (layered flag) to be adapted in
QWindowsBackingStore::flush(). Note that it does not fix
the issue; the window does not update correctly after
changing WS_EX_LAYERED.
Pick-to: 5.15
Task-number: QTBUG-60822
Change-Id: I3facd93f993b3b422b6818d55c1bce884fb57234
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Because we removed public setters from QTouchEvent and QEventPoint in
4e400369c0 and now it's proposed to give
QEventPoint a d-pointer again, the implementation of QTouchEventSequence
needs to start using QMutableEventPoint: being a friend will no longer
be enough, because the member variables won't be accessible in the future.
But because we have separate test libs for Gui and Widgets, it needs to
be further refactored into two classes.
Change-Id: I0bfc0978fc4187348ac872e1330d95259d557b69
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Remove compile warning for -Wdeprecated-declarations.
Change-Id: I747c8a390f26cfc4626e40c4684034c394bbf3c9
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Lars Schmertmann <lars.schmertmann@governikus.de>
The fix ensures that it can find the column for the array correctly
when reading/writing and also handles the integer typed arrays correctly
too.
Pick-to: 5.15
Fixes: QTBUG-83409
Change-Id: I92d982bdf0927e6ebc6dce84fec9ad6c44c26c25
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
The optimization resulted in losing out on window focus changes when
for example a native file dialog was shown, resulting in the cursor
blinking both in the parent window, and in the native file dialog.
Pick-to: 5.15
Pick-to: 5.12
Change-Id: I9c1f9df20fbc5c4b80f906ded70d9a2658b70438
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
As the connection could be lost and then reconnected for the same driver
instance then it should just do the LISTEN query as it will not do
anything if it is already subscribed.
Fixes: QTBUG-84356
Change-Id: I6179bca3991c3828ccee066fd96a6e5003c522be
Pick-to: 5.15
Reviewed-by: Lisandro Damián Nicanor Pérez Meyer <perezmeyer@gmail.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Instead of QCoreApplication::quit() directly calling exit(0), which would
leave QGuiApplication and client code out of the loop, we now send the
Quit event, and let it pass through event delivery, before finally ending
up in QCoreApplication::event(), where we call exit(0).
This has the advantage that QGuiApplication can ensure all windows are
closed before quitting, and if any of those windows ignore the close
event the quit will be aborted. This aligns the behavior of synthetic
quits via QCoreApplication::quit() with spontaneous quits from the
platform via QGuiApplicationPrivate::processApplicationTermination.
Clients who wish to exit the application without any event delivery or
potential user interaction can call the lower level exit() function
directly.
[ChangeLog][QtGui] Application termination via qApp->quit() will now
deliver Quit events to the application, which in turn will result in
application windows being closed as part of the application quit,
with an option to cancel the application quit by ignoring the close
event. Clients who explicitly want to exit the application without
any user interaction should call QCoreApplication::exit() explicitly.
Task-number: QTBUG-45262
Task-number: QTBUG-33235
Task-number: QTBUG-72013
Task-number: QTBUG-59782
Change-Id: Id4b3907e329b9ecfd936fe9a5f8a70cb66b76bb7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Following the introduction of QKeyCombination, reduce the number
of warnings raised by the test. Drive-by, remove some pointless
math like Qt::SHIFT+0, which does not make any sense and would
actually fail to compile (shortly).
Refactoring the test to fully use QKeyCombination (instead of
ints) is left as a future exercise; some QKeyCombination->int
warnings are still around.
Change-Id: If825bc4c369986623447927bb11493c4f58b544f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Fixed some QList documentation that described old API/behavior
Change-Id: I9101ebb7bed9bcac328509765f8e9b85d63d305b
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Ensured append is chosen instead of prepend for corner cases when
inserting into an empty container
Mirrored the logic in shouldGrowBeforeInsert function
Task-number: QTBUG-84320
Change-Id: I1c963a2588c331029e450fe55001bbf324f65fb4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Scoped prepend optimized allocation to only work when prepending into
a non-empty container. Otherwise, even appends would be considered
prepends since d.size == 0 when container is empty
This is, of course, not good for prepend cases but we prefer appends
over prepends. My proposal is to figure out what's the best strategy
based on use cases and performance measurements. For now, let's just
make sure appends are not additionally pessimized
Anyhow, this is an implementation detail and should not be considered
behavior change (at least not the one that is user noticeable)
Task-number: QTBUG-84320
Change-Id: Ibed616a2afa9bc24f78252f15a617bf92e2c6ea3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Ensured append is chosen instead of prepend for corner cases when
inserting into an empty container
Mirrored the logic in shouldGrowBeforeInsert function
Task-number: QTBUG-84320
Change-Id: I1c963a2588c331029e450fe55001bbf324f65fb4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Scoped prepend optimized allocation to only work when prepending into
a non-empty container. Otherwise, even appends would be considered
prepends since d.size == 0 when container is empty
This is, of course, not good for prepend cases but we prefer appends
over prepends. My proposal is to figure out what's the best strategy
based on use cases and performance measurements. For now, let's just
make sure appends are not additionally pessimized
Anyhow, this is an implementation detail and should not be considered
behavior change (at least not the one that is user noticeable)
Task-number: QTBUG-84320
Change-Id: Ibed616a2afa9bc24f78252f15a617bf92e2c6ea3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Fixed some QList documentation that described old API/behavior
Change-Id: I9101ebb7bed9bcac328509765f8e9b85d63d305b
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Following the introduction of QKeyCombination, reduce the number
of warnings raised by the test. Drive-by, remove some pointless
math like Qt::SHIFT+0, which does not make any sense and would
actually fail to compile (shortly).
Refactoring the test to fully use QKeyCombination (instead of
ints) is left as a future exercise; some QKeyCombination->int
warnings are still around.
Change-Id: If825bc4c369986623447927bb11493c4f58b544f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Instead of QCoreApplication::quit() directly calling exit(0), which would
leave QGuiApplication and client code out of the loop, we now send the
Quit event, and let it pass through event delivery, before finally ending
up in QCoreApplication::event(), where we call exit(0).
This has the advantage that QGuiApplication can ensure all windows are
closed before quitting, and if any of those windows ignore the close
event the quit will be aborted. This aligns the behavior of synthetic
quits via QCoreApplication::quit() with spontaneous quits from the
platform via QGuiApplicationPrivate::processApplicationTermination.
Clients who wish to exit the application without any event delivery or
potential user interaction can call the lower level exit() function
directly.
[ChangeLog][QtGui] Application termination via qApp->quit() will now
deliver Quit events to the application, which in turn will result in
application windows being closed as part of the application quit,
with an option to cancel the application quit by ignoring the close
event. Clients who explicitly want to exit the application without
any user interaction should call QCoreApplication::exit() explicitly.
Task-number: QTBUG-45262
Task-number: QTBUG-33235
Task-number: QTBUG-72013
Task-number: QTBUG-59782
Change-Id: Id4b3907e329b9ecfd936fe9a5f8a70cb66b76bb7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Make QTBF ready for Qt6 by using qsizetype in the API and use
QStringView where it makes sense.
Change the exported API of qunicodetools to use QStringView as
well and use char16_t internally.
Change-Id: I853537bcabf40546a8e60fdf2ee7d751bc371761
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
