Before running tests that depend on QWindow::requestActivate
Gets rid of several Wayland platform checks in tst_QWindow.
Change-Id: I7a5e029044a968dfcf87ecbb5105c01d52852d35
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Pier Luigi Fiorini <pierluigi.fiorini@liri.io>
And make it easier to fix if platformName == wayland-egl etc.
Change-Id: Ia2d62ba003796e08f3e8a5bbfd0c3fd9d185e4e0
Reviewed-by: Pier Luigi Fiorini <pierluigi.fiorini@liri.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
By using qWaitForWindowExposed instead of qWaitForWindowActivated.
Task-number: QTBUG-66824
Change-Id: Idf604157070731d9c92ccf64d8349c8571960b7c
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The test actually passes, so there's no need to skip it.
Task-number: QTBUG-66824
Change-Id: Id091776ff7ca7637fdcf0e0ced833982b5788d92
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
After a37785ec76 went in, it become
apparent that multi mouse button state handling in qtestlib is
non-existent, for details see QTBUG-64030 and QTBUG-63786. What
happened behind the scenes often was not what one would expect based
on the provided QTest::mouse* input sequence - events went missing,
incorrect events were generated, each subsequent test function
started with a state set from the function that run earlier. It is
easy to see how a minor change in one test could easily affect outcome
of other tests.
With a37785ec76, Qt platform plugins
are now responsible for sending explicit mouse button type and state
information; qtestlib should take full responsibility now as well.
But using the new API from a37785ec7 alone in qtestlib is not sufficient.
We need to reset mouse state between each new test function run (we do
this at function scope as that fits with the current qtestlib API user
expectations). This patch implements the necessary reseting logic.
Updated tst_qwindow.cpp::generatedMouseMove() to use QTest::mouse* APIs.
That test requires pressing multiple buttons, it was not possible with
QTest::mouse* APIs before this patch.
Added an auto test for multiple mouse button pressing/release in
tests/auto/testlib/selftests/mouse/. And few other tests which are
currently QSKIP-ed, but should be considered when re-designing qtestlib
APIs.
Task-number: QTBUG-64030
Change-Id: I39fdcbc73a467a7463ce2aed622bf22484095635
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Windows sends a mouse move with no buttons pressed to signal "Enter"
when a window is shown over the cursor. Discard the event and only
use it for generating QEvent::Enter as not to confuse tests.
This is preparing for the use of the new QPA API for mouse events.
Change-Id: I3eb7f3dad82d27d0b425c7eaf34b1eee11592074
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Remove BLACKLIST files which are no longer valid because the mentioned
CI systems are no longer active:
- opensuse-13.1
- opensuse-42.1
- rhel-7.1
- rhel-7.2
- rhel-7.3
- ubuntu-14.04
or the testcases are no longer available:
- QTBUG_14292_filesystem in qactiongroup
Change-Id: I80a4397059fafba169096440fdc07d45c76a1ed8
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
... and use it.
[ChangeLog][QtGui][QBitmap] Add overloaded QBitmap::fromImage that takes QImage rvalue
Change-Id: Idb6e6bb1645371996700349714041cc54bb3d005
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
QFontEngine::cloneWithSize() is used by QRawFont internally when switching
a raw-font from one size to another using setPixelSize. For CoreText, we
use a subclass of QCoreTextFontEngine to keep track of the QByteArray data
of a raw-font, but failed to overload cloneWithSize, so we would lose the
data whenever setPixelSize was called, resulting in missing text rendering
in QtWebKit. We now retain the data as we should.
Task-number: QTBUG-65923
Change-Id: I7d4186a3c32a61d48d1e9388e43f2792e8e46081
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
QAbstractItemModel::dataChanged() gained an optional role parameter
with Qt5 which was not filled within QListWidgetItem/QStandardItem
setData() functions
Task-number: QTBUG-55903
Task-number: QTBUG-63766
Change-Id: I4da9346ef8401cc8633dc4b2ea7d00451d1e3942
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Setting speed to 0 means the current frame will continue to be shown,
the finished signal is not emitted, and state remains QMovie::Running.
Task-number: QTBUG-65758
Change-Id: I681d902e3211c5899b21043e5177b7c73d5d3fb5
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The Embedded Android build (Boot to Qt Android injection) is defined by
having both Q_OS_ANDROID and Q_OS_ANDROID_EMBEDDED flags defined,
as well as having Qt config android-embedded.
This commit enables the possibility to build embedded Android builds.
(i.e. Qt build for Android baselayer only, without JNI)
Change-Id: I8406e959fdf1c8d9efebbbe53f1a391fa25f336a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
The size of the QStaticText was always adjusted, even if setTextWidth()
was used. Now size of the QStaticText is calculated according to
the set width of the text, and if no width was set, then the
automatically adjusted size is used.
[ChangeLog][QtGui][QStaticText] Fixed explicitly set width not being
respected.
Task-number: QTBUG-65836
Change-Id: If2f9f6952fb168f4bcb6d8fabfdc7360f8a36485
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
... that will be used if an icon can't be found in the
current theme.
The Icon Theme Specification
https://standards.freedesktop.org/icon-theme-spec/latest/ar01s05.html
states that unthemed icons must be searched in the base directories,
i.e. /usr/share/icons, ... But in practice unthemed icons are
installed into /usr/share/pixmaps and this dir is not used as
a base dir for icon themes. So it's better to explicitly specify
fallback dirs to avoid needless access to the filesystem.
Also some KDE application install their own unthemed icons
(into /usr/share/<appname>/pics), that can't be found by
QIconLoader. With this change it would be possible for them
to specify dirs with unthemed icons and thus be displayed
correctly in non-KDE environments.
[ChangeLog][QtGui][QIcon] Added fallbackSearchPaths() that
will be used to find icons missing in the current icon theme.
Change-Id: I0dc55ba958b29356a3b0a2123d6b8faa24d4c91e
Task-number: QTBUG-33123
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This removes the need to install an event filter on qApp just for this.
A similar thing was done with setPalette to reduce the number of event filters
in e.g. SystemPalette and Quick Controls.
[ChangeLog][QtGui][QGuiApplication] Added fontChanged signal
Change-Id: Ifa843aa42b91ac63ab17c3b064ac0e764aac77d3
Reviewed-by: J-P Nurmi <jpnurmi@qt.io>
Move the modeltest autotest in the right place, and fix the
other autotests that were using it to use the version now in QtTestLib.
Change-Id: Ic6838945f616d580f357c872ce0956c341be3b16
Reviewed-by: David Faure <david.faure@kdab.com>
We have the ability to blacklist tests for CI runs now.
Task-number: QTBUG-35109
Change-Id: I8590e83faba764dce2d52e8c62e2e2c63f7bf219
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
After we stopped sanitizing the fallback font list (with change
6ca48a847a), we now need to make
sure it is ordered so that the fonts that support the writing
system in question are always tested first, otherwise we can end up
loading a lot of fonts that will never be used.
Task-number: QTBUG-65605
Change-Id: Id2a65bbff3e64e6d6e6b4f72500778ee3e811e84
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
When we request fallback fonts, we cannot discriminate the fonts
based on the writing system support. This is especially important
since common script is now merged with other scripts, meaning that
a common script character will always go through the fallback
mechanism when not supported by the main font. When drawing
for instance a string of Devanagari characters on macOS, we would
get a list of 33 fallback fonts, but almost all of them would be
the default Devanagari font, since none of the other fallbacks
would support that script. Meaning that we would just check the
same font over and over, which makes no sense. The fallback list
has been retrieved specifically for the given script, so we do
not need to consider that when fetching the fonts.
For most of the common set, we will not have noticed the bug,
because at least one of the writing system-specific fallbacks will
have had support for latin characters as well. But when trying to
mix emojis and some non-common script, we would get a box in
place of the emoji, which had been adopted to the main script and
would only be looked for in the fonts supporting this.
Note that this exposed an issue with the QRawFont test on some
systems. When the sample text contained a space, it would
be possible to get a fallback font for this character, since
we now effectively support fallbacks. This is not the correct
behavior, but it is unrelated to this fix, and it was not what
the QRawFont::unsupportedWritingSystem() test was written to
check. I have therefore removed the space from the sample text
to make the test pass, and will make a separate task of fixing
the issue of merging fonts for whitespace characters.
[ChangeLog][QtGui][Text] Fixed a bug where mixing different
writing systems with emojis could lead to missing glyphs.
Task-number: QTBUG-61882
Change-Id: I00f6043bb01af1f2277723ccf643034aebf3e18f
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Setting the same brush on the same group and role should
not detach nor alter the result of QPalette::isCopyOf().
Task-number: QTBUG-56743
Change-Id: Ic2d0dd757d703b01e8c5d835a8c124b3317653f4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The QTextFormat::FontLetterSpacingType property was added outside
the span of the FirstFontProperty and LastFontProperty, so
the fontDirty flag would not be set when it was changed. There is
no binary compatible way to fix this before Qt 6, so for now, we
add a special case for it.
[ChangeLog][QtGui][Text] Fixed an issue where changing the letter
spacing type of a QTextCharFormat would not cause its font to
update.
Task-number: QTBUG-65345
Change-Id: I5ab53d7f82d529b57edceacfc3fa688c6741cd17
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: C. Boemann <cbo@boemann.dk>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The test would fail on Wayland with window decorations enabled because there
window content is drawn to an FBO before it's blended with the window
decorations (also drawn by the client).
Task-number: QTBUG-51741
Change-Id: I7c74ad235c6a2d50231a9f863da1810675dd4eae
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
QFontMetrics(F)::width() has been deprecated and is replaced by
horizontalAdvance(). This updates all usage of it in tests and
documentation.
It is worth noting that many or most of the usages of
QFontMetrics::width() probably intended to use boundingRect().width(),
but since it currently works, I have not looked into that, just
replaced the function name mechanically.
Change-Id: Iec382e5bad0b50f37a6cfff841bfb46ed4d4555f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The introduction of begin()/end() actually made most tests
that still use rects() duplicates. Keep them, though, for
test coverage (rects() takes a very different code path
from begin()/end()), but, under the assumption that Qt at
some point will default to built with deprecated APIs dis-
abled, make the test compile with disabled deprecated API.
Port some checks that still used rects() to begin()/end().
Change-Id: Ia7da80f0cd6ef69693f54a474924683624a2c3eb
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
During the container BoF session at the Qt Contributor Summit 2017 the
name of the signed size type became a subject of discussion in the
context of readability of code using this type and the intention of
using it for all length, size and count properties throughout the entire
framework in future versions of Qt.
This change proposes qsizetype as new name for qssize_t to emphasize the
readability of code over POSIX compatibility, the former being
potentially more relevant than the latter to the majority of users of
Qt.
Change-Id: Idb99cb4a8782703c054fa463a9e5af23a918e7f3
Reviewed-by: Samuel Gaist <samuel.gaist@edeltech.ch>
Reviewed-by: David Faure <david.faure@kdab.com>
A source of constant confusion is the QFontMetrics::width() function,
which does not return the bounding width of the text, but the advance
width. We deprecate this and add horizontalAdvance() instead, to avoid the
confusion in the future.
Note that there was an internal width() overload which was only there
for the purpose of supporting the Qt::TextBypassShaping flag. This
flag has already been replaced by public API, so no such
overload is added. Instead, we deprecate the TextBypassShaping flag
as well, which makes sense, since a replacement has been made.
Also note that there was a consistency problem with QFontMetrics and
QFontMetricsF, which are supposed to be interchangeable. The
QFontMetrics::width() functions for strings took an optional int length
argument, while the floating point version did not. This error is
corrected in the advance() functions.
[ChangeLog][QtGui][Text] Added QFontMetrics::horizontalAdvance() and
QFontMetricsF::horizontalAdvance() to replace the confusingly named
width() function. The latter has now been deprecated.
Change-Id: I0dfda43aa65c8235be32c62fade82cae05b29c79
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The vast majority is actually switched to QRandomGenerator::bounded(),
which gives a mostly uniform distribution over the [0, bound)
range. There are very few floating point cases left, as many of those
that did use floating point did not need to, after all. (I did leave
some that were too ugly for me to understand)
This commit also found a couple of calls to rand() instead of qrand().
This commit does not include changes to SSL code that continues to use
qrand() (job for someone else):
src/network/ssl/qsslkey_qt.cpp
src/network/ssl/qsslsocket_mac.cpp
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5285d43f4afbf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
... that become apparent after switching qtestlib to use enhanced mouse
event (a37785ec76). With the old code path,
where QGuiApplication was deducing event type it would deduce mouse release
event even when there wasn't one. The new code path doesn't do that, which
revealed an obscure problem when mixing QTest::mouse* APIs (where QWindow
overload goes through QWindowSystemInterface API and QWidget overload goes
through QApplication::notify() and sets mouse_buttons from there). What
happened in this specific test case "./tst_qtreeview selection statusTip" was:
// tst_QTreeView::selection sets mouse_buttons = Qt::LeftButton from QApplication::notify
QTest::mousePress(widget, Qt::LeftButton, ..)
// tst_QTreeView::statusTip
QTest::mouseMove(window, )
The old code path sees that position and state has changed, creates a fake
mouse event, which gets deduced as mouse release even if there wasn't one.
And by luck this happened to set mouse_buttons=Qt::NoButton. So when we use
mouse_buttons later to create QMouseEvent everything works as expected. With
the enhanced mouse we don't clear the pressed button from mouse_buttons (set
in tst_QTreeView::selection) as this is done only from press/release events,
then pass it to QMouseEvent and later because of that QApplicationPrivate::
pickMouseReceiver() returns nullptr.
The fix here is to use e->buttons when constructing QMouseEvent, instead of
relying on mouse_buttons which gets changed from various places and has other
issues that can not be solved without invalidating the current documentation
of QGuiApplication::mouseButtons() (e.g QTBUG-33161). Tests and any Qt code
in general should avoid using the fragile QGuiApplication::mouseButtons() API.
This patch does not affect the old code path (it continues working as before)
and fixes the issue described above for the enhanced mouse API. The enhanced
mouse API actually is better in a way that it does not get affected by button
state from test functions that run earlier, as opposed to the old code path
where every subsequent test function uses mouse_buttons in whatever state it
was left by the test functions that run earlier.
Not relying on mouse_buttons when creating QMouseEvent helped also to discover
other logic error. This caused an in incorrect button state for a mouse move
event that is generated for a release event that simultaneously changes a mouse
position.
Task-number: QTBUG-64043
Change-Id: I6ad8e49d8437ab0858180c2d0d45694f3b3c2d60
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
ultrix and reliant have not seen a release since 1995. dgux not since
2001. bsdi not since 2003. irix not since 2006. osf not since 2010.
dynix... unclear, but no later than 2002. symbian needs no mention.
All considered obsolete, all gone.
sco and unixware are effectively obsolete. Remove them until someone
expresses a real need.
Change-Id: Ia3d9d370016adce9213ae5ad0ef965ef8de2a3ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_noqteventloop.cpp 'event' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'canFetchMore' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'fetchMore' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'hasChildren' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'rowCount' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'columnCount' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'index' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'parent' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'data' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'begin' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'end' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'updateState' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'drawPixmap' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'type' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
Change-Id: I2a0c5da15994619383c1f90fee311927e58d7af0
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
From: https://tronche.com/gui/x/xlib/events/exposure/expose.html
"The circumstances in which the X server generates Expose events
are not as definite as those for other events."
On windows with XCB_GRAVITY_NORTH_WEST flag set we should not get
expose events according to e2665600c0,
but as stated earlier this might not always be true.
Nevertheless, sometimes we get expose event from X server when shrinking
window, but most of the time we don't. Make the test not flakey by
checking that we get at least 1 expose event, instead of exactly 1.
Now running test 500 times in a loop does not fail.
Task-number: QTBUG-63424
Change-Id: I8004e622020cc09e11b7d592faf6d9ee1b9cfee2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 542e11ab2b)
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
QStandardItemModel::setItemData replaces the content of an item data
with the new values rather than updating/inserting which is
the behavior for QAbstractItemModel. This patch aims to unify the
behavior.
[ChangeLog][QtWidgets][QStandardItemModel] Fixed setItemData()
incorrectly deleting unmodified data. That behavior is not
following QAbstractItemModel's documented behavior which is
no modification of data not provided in parameter.
Task-number: QTBUG-45114
Task-number: QTBUG-10872
Change-Id: I2be40cee372b68d9f71c976548ecda6dc3011241
Reviewed-by: David Faure <david.faure@kdab.com>
Commit ba1b73175b tried
blacklisting this autotest in Windows 7 only. This however
does not work. We can't pin point blacklisting to a specific
Windows version.
Task-number: QTBUG-63122
Change-Id: I5edb5b56fd86ad194214818a838db9cfd6be2ad1
Reviewed-by: Simo Fält <simo.falt@qt.io>
The qWaitFor functions themselves can not trigger a test failure, as that
will not result in the test function exiting early, so every single call
to qWaitFor needs to be wrapped in a QVERIFY.
Change-Id: Id15a1549f31d06cdbf788e1d84ea431c28636ec8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Convert QSysInfo/QOperatingSystemVersion to __builtin_available where
required or possible, or to QOperatingSystemVersion where
__builtin_available cannot be used and is not needed (such as negated
conditions, which are not supported by that construct).
Change-Id: I83c0e7e777605b99ff4d24598bfcccf22126fdda
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Swapping from RHEL 7.2 to 7.4 produces new autotest failures.
Task-number: QTBUG-63433
Change-Id: I3e59aa73b5874cfec06e166f521e06b0c7829743
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
From: https://tronche.com/gui/x/xlib/events/exposure/expose.html
"The circumstances in which the X server generates Expose events
are not as definite as those for other events."
On windows with XCB_GRAVITY_NORTH_WEST flag set we should not get
expose events according to e2665600c0,
but as stated earlier this might not always be true.
Nevertheless, sometimes we get expose event from X server when shrinking
window, but most of the time we don't. Make the test not flakey by
checking that we get at least 1 expose event, instead of exactly 1.
Now running test 500 times in a loop does not fail.
Task-number: QTBUG-63424
Change-Id: I8004e622020cc09e11b7d592faf6d9ee1b9cfee2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The function was only well defined from RGB32 and ARGB32PM formats,
this patch fixes it so it behaves well from all formats.
Task-number: QTBUG-63163
Change-Id: Id892531d9aaf997b707b430196c1166493792a2a
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
Although the window is refused input for the most part from the system,
it does not act like that it is blocked by the application modal dialog.
This ensures that it is the case and prevents things like being able to
double click on the title bar to maximize the window on Windows.
Task-number: QTBUG-49102
Change-Id: If1582819b90cb2ec9d891f664da24f13bfec7103
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Conflicts:
src/widgets/kernel/qwidget.cpp
This merge also extends the expected output of the pairdiagnostics
teamcity output (added in dev in commit
c608ffc56a) after the recent addition of
the flowId attribute to the teamcity output (commit
8f03656211 in 5.9).
Change-Id: I3868166e5efc45538544fffd14d8aba438f9173c
The blacklisting is not needed anymore as we now use -qt-harfbuzz.
This reverts commit b36e5faad4.
Task-number: QTQAINFRA-1363
Change-Id: I3ae50588204b27e6880416ae2cbc28dda53bb292
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
In Qt, we have QTextOption::tabStop, QTextEdit::tabStopWidth and
QPlainTextEdit::tabStopWidth.
Neither are very good names, since the tab stop is neither a
numerical value as in the former, nor does it have any dimensions
that can be measured, as in the latter. Vertical text advances
may also be supported by Qt at some point in the future, at
which point the name would make even less sense.
At the same time, we expose the actual type of the tab stop
distance as floating point in the QTextEdit and QPlainTextEdit
API instead of always rounding it to an int.
To avoid duplicating either of these APIs in Qt Quick, we
introduce tabStopDistance as the common term instead and deprecate
the old names.
[ChangeLog][Text] Introduced tabStopDistance property in
QTextOption, QTextEdit and QPlainTextEdit as replacement for
the inconsistently named tabStop and tabStopWidth properties.
QTextOption::tabStop, QTextEdit::tabStopWidth and
QPlainTextEdit::tabStopWidth have subsequently been deprecated.
Change-Id: Ib7e01387910cddb58adaaaadcd56c0e69edc4bc2
Reviewed-by: Paolo Angelelli <paolo.angelelli@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
I was mistaken before, the "es" part for that version isn't optional, it
*must* be omitted.
Change-Id: I9e83d2317523fb0a905e40b95a56033cf693b93b
Reviewed-by: Paul Lemire <paul.lemire@kdab.com>
The test fails when the system harfbuzz (version 1.3.2) is installed.
Change-Id: Id18a5a3c503f64ef56567d71655e433a46908b3f
Task-number: QTQAINFRA-1363
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The test fails when the system harfbuzz (version 1.3.2) is installed.
Change-Id: Id18a5a3c503f64ef56567d71655e433a46908b3f
Task-number: QTQAINFRA-1363
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
- Determine window sizes according to screen size and turn off
scrolling.
- Center the window to get it out of the way of taskbars.
- Make the window top-most.
- Turn off scaling so that coordinates passed to the QWindow
child match device coordinates and the child is positioned
correctly.
- Make the child window a yellow raster window for easier
debugging.
Task-number: QTBUG-45956
Change-Id: I05864770f8ed638d0a36f3e3f2afed73d2952436
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
These tests need fixing, but they are already partially blacklisted
and need investigation once the switch is completed.
Task-number: QTQAINFRA-1292
Task-number: QTQAINFRA-1355
Task-number: QTQAINFRA-1362
Change-Id: Ic50d0c4a01ee7e72be1129d418eff244ba783185
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The image appears to be 128x128. Fixes test failures
FAIL! : tst_QImageReader::readFromResources(rect.svg) Compared values are not the same
Actual (image.size()): QSize(128x128)
Expected (size) : QSize(105x137)
.\tst_qimagereader.cpp(1493) : failure location
FAIL! : tst_QImageReader::readFromResources(rect.svgz) Compared values are not the same
Actual (image.size()): QSize(128x128)
Expected (size) : QSize(105x137)
which likely do not show in the CI since the qtsvg module is not
available when checking only qtbase.
Change-Id: I84ebdde6f2251f56a00f16a54bd20d0c2b23638e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
When creating the statements, it is now possible to pass a list of
enabled layer names. Every node or edge which is not in the list of
enabled layers will be pruned from the graph prior to traversal. Note
that an empty layer list for a node or an edge means it is on all
layers.
Change-Id: I61a4df7d395b4beb42ee55ce08fef8ebe04263c9
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
In particular, go through QMetaType/QMetaEnum to deal with enums.
Change-Id: I2e847ba328eb46609b86b3dfd6c4dbf532d78b7d
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
In particular, go through QMetaType/QMetaEnum to deal with enums.
Change-Id: Idbe16c913c1d471a4a91d219f77876e498c192d9
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Passing a null pointer as a parameter to the setChild function no
longer crashes when calling the
QStandardItemModelPrivate::itemChanged signal. The child is removed
from the model.
The patch also fixes the behavior of deleting a item. A
dataChanged signal is emitted.
Change-Id: I027e8b0d84fe33c5fca056df870f0e60a020824b
Reviewed-by: David Faure <david.faure@kdab.com>
In the past, we had an undocumented text flag that worked with
one of the QPainter::drawText() overloads. This was never intended
as public API and served a specific cause in Qt WebKit at one point.
But there is a general need for such API, as disabling shaping features
easily gives 25% performance improvement on text rendering even for
fairly short strings.
This patch adds a new style strategy flag to disable shaping and
will just uses the CMAP and HDMX tables to get glyph indices and advances
for the characters. In Qt 6, the TextBypassShaping flag can be removed
completely and be replaced by the style strategy.
[ChangeLog][QtGui][Text] Added QFont::PreferNoShaping style strategy to support
improvements to performance at the expense of some cosmetic font features.
Task-number: QTBUG-56728
Change-Id: I48e025dcc06afe02824bf5b5011702a7e0036f6d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Fixes flakiness where we enter and exit window states too fast on macOS,
while also removing 2 second waits in the positioning tests that were
slowing things down needlessly.
Change-Id: Ia4ee4d4812474c520fdd3f76b047f4eabe1a8220
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This test verifies processEvents(WaitForMoreEvents)
behavior by first processing all pending events (in
a loop) and then verifying that a following processEvents
call actually waits.
But there is no guarantee that the OS won’t introduce
more events after the first loop has completed. This
does indeed seem to happen on recent versions of macOS.
Change the test to not require that the processEvents
call blocked and de-blacklist.
Task-number: QTBUG-61131
Change-Id: Ic8fa74a6085165442791264f6f137a2fa6083138
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The tests uses QWindow::requestActivate() to verify that a window does
not become active when a modal dialog is running, but on macOS we have
no guards for this, so the test can potentially fail.
In addition, due to a bug in QCocoaEventDispatcher, we end up waiting
5 seconds for that failure to manifest.
Task-number: QTBUG-61965
Task-number: QTBUG-61964
Change-Id: I2f1b62d953e9b6dabf2df0c3023564f27919c498
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Now the parameters from the prototypes are used as default values and
the graph file can overload them.
Change-Id: I9a8a73963c7e578bd0a34e96f76f147a12224f4f
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This will allow to make the prototypes more extensible when referred to
from a graph file while providing some sane defaults.
Change-Id: I1ae10182427d8a7d29c51a64e19e99139494ea92
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This will allow to create nodes having an entry point for tuning, still
need to be exploited by the loaders and the shader generator. Coming in
further commits.
Change-Id: I8384b0f528c9919e9f8d35102adde2b307f08b80
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
We forgot to check that the node content was correct and complete when
loading the graph.
Change-Id: Id4ee6aaba6ca268b0785e7fa3fb51a19817e7c9c
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Changes internal data-size and pointer calculations
to qssize_t.
Adds new sizeInBytes() accessor to read byte size, and
marks the old one deprecated.
Task-number: QTBUG-50912
Change-Id: Idf0c2010542b0ec1c9abef8afd02d6db07f43e6d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix a number of issues that caused polygons to not always be drawn
fully connected.
Ensures the original lastPixel is set when drawing closed polygons,
ensure we don't round away from the original starting point, and add
handling of edges that need to be rounded half a pixel sideways to line
up with endpoints.
Task-number: QTBUG-27053
Change-Id: Ib51ee5623a629996af51a0967096383f04e91e2f
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Especially in examples, where we should show off our convenience
functions, prefer calling these functions over doing arithmetic with
M_PI (or approximations thereto) and 180 (give or take simple
factors). This incidentally documents what's going on, just by the
name of the function used (and reveals at least one place where
variables were misnamed; the return from atan is in radians, *not*
degrees).
Task-number: QTBUG-58083
Change-Id: I6e5d66721cafab423378f970af525400423e971e
Reviewed-by: Jüri Valdmann <juri.valdmann@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reads the v4 and v5 info-header together with the rest of the info-
headers, and use that to report the correct image format before
decoding.
Change-Id: I69e2bcc54367b7f14820815ae2ae1fa2d8d5dc8c
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Like other QWindow properties we can just store it, and the platform
window should pick it up on creation like other properties.
[ChangeLog][QtGui][QWindow] setMask() no longer requires the window
to be created to have an effect; it can be set at any time.
Change-Id: I55b616363801b770bd61bda5325b443013b99866
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Currently a file with a .9.png extension will only have its @2x variant
found if it follows this format:
foo.9@2x.png
Since ".9" should be considered part of the file suffix, it should
ideally be able to look like this and still be picked up:
foo@2x.9.png
This patch makes qt_findAtNxFile() account for .9.* extensions.
This is needed for the image-based style support in Qt Quick Controls
2, which uses 9-patch images.
qmlbench benchmark results using
benchmarks\auto\creation\quick.image\delegates_image.qml with
QT_SCALE_FACTOR=2 show no difference in performance after this patch
is applied.
[ChangeLog][QtGui] High DPI variants of 9-patch images can now be
loaded using the following syntax: "foo@2x.9.png"
Change-Id: I6d1384113bef21b4fe85a104ee6b16869c93b077
Reviewed-by: J-P Nurmi <jpnurmi@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The return order of the keys is random, so let's sort both first, then
we can compare the lists. Should get rid of the test flakiness.
Change-Id: I2e89d3cc603da6a4667b3677350baa4d40d59b45
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This class allows to node definitions from a JSON representation. This
will come in handy to ship preset prototypes for use with
QShaderGraphLoader.
Change-Id: I3f3b5d7852e17d484069b4814ee6e5910997c613
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This class allows to load a shader graph from its JSON representation.
To avoid duplicating the shader snippets inside of the JSON which would
be a maintenance nightmare, we instead allow to register a set of node
prototypes by their name and only refer to said names inside the JSON.
Change-Id: I3e7b39e8b3c25f51f331a0a59dda883ac8e2bc57
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This class is meant to generate code from shader graphs
Change-Id: I1cf22352387f3f9f55e7589aa77a296689836911
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This is our "byte code" representing a flattened graph. It will be used
as input for the code generation.
Change-Id: Ie02a60d07c035f3d16872e79931eb7cde168a8d1
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This allows to connect our nodes together via ports. This way user code
can assemble a shader from simpler blocks.
Change-Id: I168dcf4af6aa11ad47b68d91e5a55e96ca922678
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Nodes will allow to describe inputs, outputs or value transformations in
a shader graph.
Change-Id: I44f806d9595fd0e68fc9026cda2b4fa0a62af283
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
The ports will be used to connect nodes from our shader graphs.
Change-Id: I9d4fbb1f7bd8320c4373ebb166a4fe13bd1482c9
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This is the first building block toward a node based generator for
shader programs.
QShaderFormat will be used by the other classes to qualify in which
format the code snippets and includes used are.
Change-Id: I11aefc6bb359832a853ed1b6bec302dc3516cfc4
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Use M_PI (and friends), where possible, in favor of hand-coded
approximations of various (in)accuracies. Where that's not available
(e.g. fragment shaders), use the same value that qmath.h uses for
M_PI, for consistency. Replaced math.h with qmath.h in places that
defined a fall-back in case math.h omits it (it's not in the C++
standard, although M_PI is in POSIX); or removed this entirely where
it wasn't used.
Reworked some code to reduce the amount of arithmetic needed, in the
process; e.g. pulling common factors out of loops. Revised an
example's doc to not waste time talking about using a six-sig-fig
value for pi (which we no longer do) - it really wasn't relevant, or
anything to be proud of; nor did the doc mention its later use.
Task-number: QTBUG-58083
Change-Id: I5a31e3a2b6a823b97a43209bed61a37b9aa6c05f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test was never loading images from a valid path, and thus never
had any fullfill the base option which meant nothing was tested.
Making it work revealed that the Format option on BMP formats doesn't
predict semi-transparent files.
Change-Id: I7035a0f63ebfbce940ce7a17a6142cf177480798
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Similar on how it is done for Windows desktop we also use the given
style hint when building the list of fallbacks a font family.
Change-Id: I71378581d07f20ebe5bf0bc757bba919cc70e118
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
This method now returns -1 by default, due to commit 6255cb893d
which mistakenly replaced -1 with Qt::IgnoreAction (0x0).
As a result, dropping is forbidden in a number of applications
(I detected this in zanshin).
Change-Id: I4922451216e08d5d3fe36f8ba87364a361b691bf
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
We have to use a temporary data path for winrt, as the applications
are sandboxed and cannot just put data anywhere.
Change-Id: I8f95de132e5b5ac77441cbbf26af873b8018c7cb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Corresponds to the similar function QPainterPath::intersects() and is
faster than calculating the intersection and then checking if it is
empty.
Change-Id: I694bb2206ed330a456a41d4118a952a68177b7a2
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
QPainterPath could in certain cases where sub-path points were on the
border of a rect fail to calculate intersects() correctly.
The patch adds handling of such cases by looking if end points cross in
or out of the rect. Other cases are already caught.
Task-number: QTBUG-31551
Change-Id: I6284da8ff8646d4636702923a76362302dde5767
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Return an empty size if no suitable entry found to avoid mismatch with
the returned pixmap()'s size (the QIconEngine::actualSize() returns the
originally requested size).
Change-Id: Ia278719a54392b62c5f9fc0529476baba5cd7df0
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The intersection algorithm for intersection with rects, might return
one edge of the rect even if that edge does not intersect with the path.
To deal with that we collapse paths with empty bounding rects to the empty path.
Task-number: QTBUG-60024
Change-Id: I3e305983c66548e772d7d7ce3de99d715edbdd1b
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Changed testing of focus of modal dialogs to match behavior on offscreen
and minimal platforms.
Change-Id: Ife3ea41b4b78df2e64c8d8e740332914b1e5a67c
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
... for calculated test data names.
In tst_qimage.cpp, use QLatin1String instead of QString for image
format pretty-printing, to avoid needless memory allocation and, more
importantly in the context of this patch, to make the result usable
with addRow(), which does not support %ls.
Change-Id: Ib1953aee2da235ae912917a450491ac8be69ca3a
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
CSS style such as "line-height: 1.5;" should be used as a multiplier,
but Qt uses it as percentage which makes line spacing way too small. To
workaround this, convert it to percent and use as
QTextBlockFormat::ProportionalHeight instead.
[ChangeLog][QtGui][Important Behvior Changes] Changed CSS line-height
property with multiplier to follow CSS spec
Task-number: QTBUG-56848
Task-number: QTCREATORBUG-17683
Change-Id: Icc98f7c0d4d07542a220702c287f23fa450ef875
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Fixes two separate errors. QImage::transform was incorrectly adding
colors to the color-table of the returned image when the converted image
would not be indexed, and qpnghandler was looking at non-empty color-
table instead of color format.
Task-number: QTBUG-43708
Change-Id: Ife14b6428ca65ac7d3a0b36a89a73e56d64586b4
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
