Before this patch a very accurate drop position below
or above an index was needed. Therefore it was not that
easy to do.
This patch increases the above/below area to be about
18% of the item (still leaving the most space for the item).
An average user will likely be 2-3x faster with dropping
below or above (while not losing much when dropping on items).
[ChangeLog][QtWidgets][ItemViews] Made it easier to
drop above and below items.
Change-Id: I47f0f80c76878c17ebf3f93d0a0cc82755971c2a
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Introduce nullptr and replace foreach with new C++11 range based for
loops. Minor fixups of signals, file dialog usage.
Apply the same changes to the ItemViews/puzzle example since it
shares parts of the code with DragAndDrop/puzzle. Make some
changes to both examples to that the diff of the two becomes
small for easier comparison.
Task-number: QTBUG-60635
Change-Id: I8af824229ebac24d6ec151eae92176d227695490
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
All systems must implement it by now. If there's any system still
without it, that means it has no IPv6 support, so they can disable
QtNetwork entirely.
[ChangeLog][Deprecation Notice] Starting with Qt 5.10, IPv6 support is
mandatory for all platforms. Systems without proper IPv6 support, such
as the getaddrinfo() function or the proper socket address structures,
will not be able to build QtNetwork anymore.
Change-Id: I3868166e5efc45538544fffd14d8c28046f9191b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Proximit events are sent to the QGuiApplication, catch them via
event filter.
Change-Id: I7f896e7d9f5c90347b9e3c708feb69abd1c5fc95
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Introduce Contact struct to store contact data and use it
instead of QPair<QString, QString>. Proper naming really
clarifies the code.
Task-number: QTBUG-60635
Change-Id: Ibfb421dfc854accc382212b0da46e7aafc0d528a
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The semantics of QWindow::requestUpdate() is that it's used when the
window needs updates outside of the normal window invalidation callbacks
such as expose and resize events, e.g. when doing animations.
As a result, user code might not be prepared to handle window
invalidations in the update-request callback, assuming those
will still be delivered as normal, so that's what we do.
This was exposed by resizing one of the simpler Qt Quick examples,
where the resize's expose event was delivered as an update request,
but didn't trigger an unconditional draw of the window as it should,
as the scenegraph didn't change in response to the resize, which is
typical for an update request.
Change-Id: Ida8f85f1cf61c332aa9b199520e6854c48d3ab40
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Otherwise we'll end up creating a NSPanel for the QMacNativeWidget which is
never closed, even if the backing NSView is moved to a new superview.
Ideally this would be based on [NSView viewDidMoveToSuperview] and
[NSView viewDidMoveToWindow], with retain/releases of the corresponding
NSWindow, but that needs more research, especially as AppKit on macOS
10.13 will always keep a strong reference to the NSWindow.
Task-number: QTBUG-63443
Change-Id: I9eec5ea871373d00dedf154600bf7005898cf37a
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The modern approach to offscreen rendering on macOS is via FBOs, which
means there's no reason to allocate an NSView and corresponding NSWindow
just for that. In the offscreen case the NSOpenGLContext has a nil-view.
Change-Id: I2d1d407069af4d5283e6f56fba83db8eaf694ac6
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
We were using the default ones, provided by RFC7540. It appears they are way
too restrictive and conservative: when downloading something relatively big,
a stream keeps spending the whole session/its own 'recv' windows and thus
we have to constantly send WINDOW_UPDATE frames. This significantly slows
down our HTTP/2 implementation, making it orders of magnitude slower than
HTTP/1.1. To fix this:
- We send SETTINGS_INITIAL_WINDOW_SIZE in the first SETTINGS frame
to inform our peer that per-stream WINDOW is bigger than 64Kb
- We increase the session's receive window size.
Task-number: QTBUG-63722
Change-Id: I31312fcfd5f0fc0aee6aaa5d3562cc7d1b931adc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Error out if it's missing or broken (Mersenne Twister not present).
This ensures that we never have a low-quality random generator in Qt.
Change-Id: I0a103569c81b4711a649fffd14ec80649df7087e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
NSTimeInterval is a typedef for double, but the code stored its value in
an int, and only then multiplied by 1000.
Fix by only truncating NSTimeIntervals to int(64_t) *after* the
multiplication by 1e3 to get milliseconds.
While it's highly unlikely that a transition will have fractional seconds
length, don't assume if you can just calculate the more exact result.
Adapted-From: Marc Mutz <marc.mutz@kdab.com>
Change-Id: I0911b9c945a94ca24c3dfb23ed6a849141076326
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This is C++, not qmake code. Amends 5fa6438633.
Change-Id: Ie5b88c3a06dbe089948488ea3b4b297a08164113
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We need it
1. to be sure, that thread is already attached to jvm
when we attach debugger to the process
2. to have a human-friendly name for main native thread
Change-Id: I1e572a0f09ec8af24a910835aaa6d302f6f2cb43
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Upgrading to a recent Vulkan SDK (e.g. 1.0.61) leads to getting
a few previously unseen warnings from the validation layers.
Fix these:
vkDebug: ParameterValidation: 8: vkCreateSampler(): The
samplerAnisotropy feature was not enabled at device-creation
time, so the maxAnisotropy member of the VkSamplerCreateInfo
structure must be 1.0 but is 0.000000.
vkDebug: DS: 461375808: vkCmdPipelineBarrier():
pImageMemBarriers[0].srcAccessMask (0x4000) is not supported by
srcStageMask (0x1). The spec valid usage text states 'Any given
element of pMemoryBarriers, pBufferMemoryBarriers or
pImageMemoryBarriers must not have any access flag included in
its srcAccessMask member if that bit is not supported by any of
the pipeline stages in srcStageMask, as specified in the table of
supported access types.'
vkDebug: DS: 6: vkCmdDraw(): Cannot use image 0x7 with specific
layout VK_IMAGE_LAYOUT_GENERAL that doesn't match the actual
current layout VK_IMAGE_LAYOUT_SHADER_READ_ONLY_OPTIMAL.
vkDebug: DS: 61: Descriptor set 0xc encountered the following
validation error at vkCmdDraw() time: Image layout specified at
vkUpdateDescriptorSets() time doesn't match actual image layout
at time descriptor is used. See previous error callback for
specific details.
Change-Id: I1a3200221ac725c2fa661eff3ac075262b9355c2
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Auto-reset events are automatically reset to non-signaled when we get
notified about the signaled state. This implies that we cannot check the
event state again in activateEventNotifiers. Instead, store the signaled
state in a QAtomicInt and test and decrement that.
This amends commit 85403d0a.
Task-number: QTBUG-63555
Change-Id: I0adee3d2929783f98d91060f9106c8b5266d72fa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The Qt documentation is using 'upper-left' everywhere except at
QRect(F) detailed description and Qt::CoordinateSystem enum description.
Therefore fix it in those four places to be consistent.
Task-number: QTBUG-59981
Change-Id: Ie652044d0207ea5a42888d9e1f1dc9a86b1e9410
Reviewed-by: Mats Honkamaa <mats.honkamaa@qt.io>
Reviewed-by: Tarja Sundqvist <tarja.sundqvist@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Use assignment. Fixes:
vulkan\qvulkaninstance.cpp(811) : error C2061: syntax error : identifier 'd_ptr'
vulkan\qvulkaninstance.cpp(812) : warning C4551: function call missing argument list
vulkan\qvulkaninstance.cpp(813) : error C2659: '=' : function as left operand
vulkan\qvulkaninstance.cpp(814) : error C2440: 'return' : cannot convert from 'QVulkanDeviceFunctions *&(__cdecl *)(void)' to 'QVulkanDeviceFunctions *'
There is no context in which this conversion is possible
vulkan\qvulkaninstance.cpp(832) : error C2061: syntax error : identifier 'd_ptr'
vulkan\qvulkaninstance.cpp(833) : error C2541: 'delete' : cannot delete objects that are not pointers
vulkan\qvulkaninstance.cpp(834) : error C2659: '=' : function as left operand
Change-Id: I859b141aa0cb24b1f85dc9f229262a4145651d7c
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Commit 282065d443 renamed the generator
functions but we didn't update all the docs.
Change-Id: I0a103569c81b4711a649fffd14ec877ffbfe710d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
There are a couple of Q_ASSERT wrapped by the new noexcepts, but most of
those aren't validation of external parameters, only of internal
construction. The two exceptions are the checks for pointer alignment.
Change-Id: I0a103569c81b4711a649fffd14ec8523d741dfb6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Incidentally, we can fix a typo.
[ChangeLog][QtNetwork][QNetworkInterface] Changed allAddresses() to not
include addresses found in inactive interfaces, matching the user
expectations of this function. If those addresses are needed for some
purpose, the application will need to call allInterfaces() and obtain
the addresses in each interface.
Task-number: QTBUG-51922
Change-Id: Iaf4157b7efa2416d898cfffd14d969c963ec0a2a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
I don't know why this needs to be a template specialization instead of
overload, like all the other toString overloads. With GCC 7, it was
calling QTest::toString<QHostAddress>, which returns nullptr.
Change-Id: I638cf58bfa7b4e5fb386fffd14ea7add0eef8f87
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
It must detach, otherwise it overwrites all QHostAddresses that were
sharing a given QHostAddressPrivate. This overload was introduced in
5.8 and probably as a result broke some pre-existing code, that previously
was using a conversion and the correctly working setAddress.
Conveniently, QHostAddress::clear() does: d.detach(); d->clear();,
exactly the first thing we do in other overloads of setAddress.
Task-number: QTBUG-63764
Change-Id: I63c36e877c9358d3ff26ba1f2e4adf35b771f426
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
SYSTEM is used for system() calls, while SHELL is used in the target
Makefiles.
Task-number: QTBUG-62985
Change-Id: Ia75d3939c59c98699359421166433e8b4a6ee35e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This code asks the platform theme to resolve SpellCheckUnderline to an
actual pen style (wave, solid, dash, etc.) but if there's no theme,
or if the default implementation in QPlatformTheme is used, the value is
still SpellCheckUnderline, which then casted to a PenStyle below in
qpainter.cpp:
pen.setStyle((Qt::PenStyle)(underlineStyle));
The value 7 is an invalid PenStyle, which leads to random behavior
when drawing the underline. Make it WaveUnderline if the platform theme
had no opinion on how to draw it.
Change-Id: I4f02f9b58f10582cee5aefce7a4d5cd300133140
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Unique begins with a "y" sound, hence a unique is correct.
Change-Id: I9eb6b4d4c9ddab45af931e97c041c24edf163eca
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
... so that it comments the actual code, not what this code was before.
Change-Id: Ib191b9d7bd3ae3cda39a15f0f711cb1dd3c5c2b7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The autotest has been blacklisted for RHEL 7.1 and RHEL 7.2 earlier already
and it is still failing in 7.4.
Task-number: QTBUG-46116
Change-Id: I0f33be849513a2debaf8c093dcd413fa09b5c681
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
kernel/qopenglcontext_p.h included opengl/qopengl.h as "qopengl.h",
triggering:
In file included from ..\..\include\QtGui\5.11.0\QtGui\private/qopenglcontext_p.h:1:
..\..\include\QtGui\5.11.0\QtGui/private/../../../../../src/gui/kernel/qopenglcontext_p.h(58,10): warning: #include resolved using non-portable Microsoft search rules as: ..\..\include\QtGui/../../src/gui/opengl/qopengl.h [-Wmicrosoft-include]
Task-number: QTBUG-63512
Change-Id: I867a8f2ceeb8a9369dfe0163c179572feadc033e
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The documentation of QKeyValueIterator was in the wrong place. This
patch moves it with the other iterators documentation.
Change-Id: I42ad529f72f9b19fdecfca7ddfeb6e6f4dcfebac
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
That overload documentation was missing the "exact" qualifier regarding
the search result.
Change-Id: I27a08b60f9b88ae497f8bd9d9ba6a99f4a9ab4d6
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
They are needed for older compilers that doesn't support
the __fp16 extension. Reverts under the assumptions other
compilers will optimize it away.
This reverts commit 6dc7e468df.
Task-number: QTBUG-63693
Change-Id: If780de001d8c12df0db12caaf62505f16e01b663
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
