Change 3370ab9119 introduced
warnings from MSVC:
tst_qsqlquery.cpp(4005): warning C4805: '==': unsafe mix of type 'const bool' and type 'int' in operation
tst_qsqlquery.cpp(4059): note: see reference to function template instantiation 'void runIntegralTypesMysqlTest<bool>(QSqlDatabase &,const QString &,const QString &,const bool,const T,const T)' being compiled
with [ T=bool ]
tst_qsqlquery.cpp(4006): warning C4805: '==': unsafe mix of type 'const bool' and type 'int' in operation
tst_qsqlquery.cpp(4006): warning C4804: '/': unsafe use of type 'bool' in operation
tst_qsqlquery.cpp(4026): warning C4804: '+=': unsafe use of type 'bool' in operation
Extract an overload taking a QVector of values and use that for the
bool case instead of looping over min/max to generate a sequence of values
for bool.
Change-Id: I72583774e788b8df899f22ed1a64278217e664f6
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
The alpha channel of an RGB32 image was not properly ignored when doing
blending with partial opacity.
Now the alpha value is properly ignored, which is both more correct
and faster. This also makes SSE2 and AVX2 implementations match NEON
which was already doing the right thing (though had dead code for
doing it wrong).
Change-Id: I4613b8d70ed8c2e36ced10baaa7a4a55bd36a940
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Add a QT_QPA_EGLFS_KMS_PLANE_INDEX environment variable that applies
both to the GBM and EGLDevice backends. When set to a value between 0 and
the number of planes on the connector - 1, the chosen overlay plane will
be used for output, meaning there will be a drmModeSetPlane to configure,
and, in case of EGLDevice, the plane's corresponding EGL layer will get
chosen instead of the CRTC's.
Task-number: QTBUG-57386
Change-Id: I12c89472ea5730987052f39211fadc597d1302ef
Reviewed-by: Pasi Petäjäjärvi <pasi.petajajarvi@qt.io>
Add a QT_QPA_EGLFS_KMS_CONNECTOR_INDEX environment variable that applies
both to the GBM and EGLDevice backends. Instead of specifying all
uninteresting outputs as "off" in the config file in QT_QPA_EGLFS_KMS_CONFIG,
this variable provides a shortcut to force one single connector and ignore
all others in embedded systems with a fixed connector configuration. The index
must be between 0 and DRM connector count - 1.
Task-number: QTBUG-57386
Change-Id: I3f9562f48bf6b2ffaf9a0cc232e09a7e0c15645b
Reviewed-by: Pasi Petäjäjärvi <pasi.petajajarvi@qt.io>
Make it possible to identify from the logs that QT_QPA_EGLFS_LAYER_INDEX
was set, in order to help troubleshooting.
Change-Id: Ic22825e5df9f0eeb31f817f398b9f6c000c3a00f
Reviewed-by: Pasi Petäjäjärvi <pasi.petajajarvi@qt.io>
Parent patch introducing usage of this attribute did not add it to
the EGLStream support header. This is likely not fatal, but follow
the practice of defining the constants ourselves, in case they are
not present.
Change-Id: Ib16f9809f9c6a212570c49472bb840183232e68a
Reviewed-by: Pasi Petäjäjärvi <pasi.petajajarvi@qt.io>
If the StatusNotifierWatcher disappears and then appears again, we need
to register our tray icon again with it.
To do this, split the “register with watcher” part into a separate
method, and call it when m_dbusWatcher emits its serviceRegistered()
signal.
Change-Id: Id5fc8ac81b5038a61b678514dabd3eb9c8f1c106
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Setting QT_QPA_EGLFS_STREAM_FIFO_LENGTH to a >= 1 value changes from
mailbox to FIFO mode, with the specified length.
[ChangeLog][Platform Specific Changes][Linux] Added an option to switch
from mailbox to FIFO mode in eglfs' EGLStream backend. This is done by
setting the environment variable QT_QPA_EGLFS_STREAM_FIFO_LENGTH to a
>= 1 value, the desired length of the FIFO queue.
Change-Id: Ib98e2ff805f8c00ca2e224d1db5b9c1b2c9a04f0
Done-with: Pasi Petajajarvi <pasi.petajajarvi@theqtcompany.com>
Reviewed-by: Pasi Petäjäjärvi <pasi.petajajarvi@qt.io>
Do not create QByteArray from const char* to compare with other
QByteArray, because there is an overloaded operator==.
So avoid needless allocations.
Reorder condition, because isEmpty() method is cheaper than
string compare.
Change-Id: I8d2c8a0fb247528d9ce485007431167372d62bff
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This static method was introduced in
8758f532ae
and was unused even then.
Change-Id: Id0d409b7fade977bbbabfcdee0c432b7058f8ace
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
We can use 'override' directly since Qt 5.7.
Also remove redundant 'virtual' keywords.
Change-Id: Ia40be0e1e60e51f9d043ab575fd6b9305ea620b0
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
If 5ca9631d3a is reverted, this test
segfaults on Unity most of the times.
Task-number: QTBUG-55966
Change-Id: Ice59842e0a1a7930e3cd10c4c7319ef033fe6a58
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
it's wrong to use the escape function for makefiles, as the command
goes directly to a popen() call.
Task-number: QTBUG-57343
Change-Id: I34a8e4d8fb406303c593e7c1e24019e0f756e7f8
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Fixes: warning: implicit conversion from 'float' to 'double' to match
other operand of binary expression [-Wdouble-promotion]
Task-number: QTBUG-57068
Change-Id: I897a341aca83873bc6abd256a82a3b9f09409833
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Don't block the event that Qt depends on to close popups.
Task-number: QTBUG-57292
Change-Id: Ida1f928b81868f68a7b1e19cd0b83485d2a7232e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We can use 'override' keyword directly since Qt 5.7.
Change-Id: I31127478a0a96798a4e018d9996842204e307552
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Q_UINT64_C appends a literal, which causes warnings:
tst_qtextstream.cpp(2026): warning C4146: unary minus operator applied to unsigned type, result still unsigned
tst_qtextstream.cpp(2030): warning C4146: unary minus operator applied to unsigned type, result still unsigned
tst_qtextstream.cpp(2031): warning C4146: unary minus operator applied to unsigned type, result still unsigned
tst_qtextstream.cpp(2032): warning C4146: unary minus operator applied to unsigned type, result still unsigned
tst_qtextstream.cpp(2289): warning C4146: unary minus operator applied to unsigned type, result still unsigned
tst_qtextstream.cpp(2309): warning C4146: unary minus operator applied to unsigned type, result still unsigned
tst_qtextstream.cpp(2329): warning C4146: unary minus operator applied to unsigned type, result still unsigned
tst_qtextstream.cpp(2355): warning C4146: unary minus operator applied to unsigned type, result still unsigned
tst_qtextstream.cpp(2381): warning C4146: unary minus operator applied to unsigned type, result still unsigned
tst_qtextstream.cpp(2411): warning C4146: unary minus operator applied to unsigned type, result still unsigned
Change-Id: I69ac87c224b75aff059477362d8a317c7e766ec2
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
And get rid of related DEFINES in the pri file
Change-Id: I54cf25b7cb447af22b410213759044e8018939a6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
After all the check makes sense here. If a timer was removed as a result
of sendEvent and it was not at the end of the list the list is not
shrunk but the timer info's id is just set to INVALID_TIMER_ID.
Additionally the timer's object should be fetched before we unlock the
locker as timerIdToObject is changed in removeTimer and we might access
a nullptr if the timer has been removed.
Reverts c83ba01f7b
Task-number: QTBUG-56756
Change-Id: Ib1a04c02fbfcf4c939b4891d42f954dc9e87149e
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
This class is just a record with a bit of functionality on it.
To prevent pessimizing it compared to a C struct with the same
contents, mark all operations constexpr and remove the point-
less copy ctor (the generated one is just fine).
Converge on passing QRect, QSize, QPoint by value. Was mixed
cref and value passing before.
Saves ~1KiB each in text and data size on an UBSan build,
somewhat less, of course, on a normal one.
Change-Id: Ibae16792d822ff183a0c542380501978f2108d93
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
.. instead of manually casted 0s.
QCOMPARE(., nullptr) was added for Qt 5.8. Make use of the new API.
In tst_qwidget.cpp, as a drive-by, change
qApp->focusWidget() -> QApplication::focusWidget()
Change-Id: I1331b8916b026d48e01534d1ed0b3d72f3f3d50c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Bound x and y to the clipping rect instead of the texture rect.
This has minor effects on lancelot, but all within the 5% fuzz.
Change-Id: Ia6141e4f7649dad53211bd959af1bce48372e26d
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Change-Id: Idb6216a645f7c9791674d16665331a63da46b132
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: James McDonnell <jmcdonnell@blackberry.com>
Turn styles into proper features and test for them
using qtConfig/QT_CONFIG.
Change-Id: I7e28785a46723364b90d8aa286f4d6e5ab085651
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Turn them into proper private features, and remove setting of
defines in the pri file.
Change-Id: Iafc11e93d4a9349bf15971dc1adac9a828ea03f6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
tst_qtcpsocket.cpp:606:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
tst_qtcpsocket.cpp:670:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
tst_qfile.cpp(2661): warning C4334: '<<': result of 32-bit shift implicitly converted to 64 bits (was 64-bit shift intended?)
tst_qarraydata.cpp(760): warning C4334: '<<': result of 32-bit shift implicitly converted to 64 bits (was 64-bit shift intended?)
main.cpp:40:33: warning: ignoring return value of 'char* fgets(char*, int, FILE*)', declared with attribute warn_unused_result [-Wunused-result]
Change-Id: I80ccef29b71af6a2c3d45a79aedaeb37f49bba72
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
It was phrased for an out-of-date version of Qt.
Adapt phrasing to be future-proof. Reflow text.
Change-Id: Ic026a7719ba6fb1de2830358a75cd6f30c5f8897
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The check for 8x zoom was inverted and checked for 1/8x zoom.
Change-Id: I45156db709bab6b702769c2a70d4d2af51b5533a
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
... if sync() has already been called manually.
Change-Id: I11bd6810aa3c1065a72ffaa2001d1bdbf8bf9c89
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make it possible to identify its warnings in log files, like:
qdbusxml2cpp: Got unknown type `(s)' processing '../org.qtproject.QtDBus.Pinger.xml'
You should add <annotation name="org.qtproject.QtDBus.QtTypeName.Out0" value="<type>"/> to the XML description
qdbusxml2cpp: Got unknown type `(s)' processing '../org.qtproject.QtDBus.Pinger.xml'
You should add <annotation name="org.qtproject.QtDBus.QtTypeName.Out0" value="<type>"/> to the XML description
Change-Id: I242d9316b317de0164af2725b7836551f2f69037
Reviewed-by: Rolf Eike Beer <eb@emlix.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Compare to QLatin1String and use reinterpret_cast to fix MSVC warning:
tst_qstring.cpp(1271): warning C4312: 'type cast': conversion from 'unsigned int' to 'void *' of greater size
Change-Id: I4f26d72f0fad59e09636fe609a2772309a688e5c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
