So far we did bind the definition of Q_COMPILER_VARIADIC_MACROS to
C++11 (so gcc, clang will not define it in default gnu++98 standard).
However, variadic macros are a feature of the gcc preprocessor since
version 2.97, and are enabled in the default configurations on gcc, clang,
icc.
This might cause warnings and errors though if one enables additional
warnings in gcc, clang (e.g. by -pedantic). Anyhow, as a precedent
qglobal.h already relies on 'long long' ... The warning can be disabled
by adding '-Wno-variadic-macros'.
[ChangeLog][Compiler Specific Changes] Variadic macros are now enabled
more liberally for gcc, clang, icc. If you have warnings (because you e.g.
compile with -pedantic), disable them by -Wno-variadic-macros.
Change-Id: Ie979b85809508ad70cab75e6981f20496429f463
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This partially reverts 5764f5e6ea and
fixes the problem differently.
After this commit, "file:///foo" is still equal to "file:/foo", but
"foo:///foo" becomes different from "foo:/foo", as it should be.
Task-number: QTBUG-36151
Change-Id: Ia38638b0f30a7dcf110aa89aa427254c007fc107
Reviewed-by: David Faure <david.faure@kdab.com>
This is extremely useful, since the most common action after a failed
compare-and-swap is to loop around, trying again with the current
value as found in memory.
Code currently written as:
do {
Type value = atomic.load();
...
} while (!atomic.testAndSetRelaxed(value, desired));
Becomes:
Type value = atomic.load();
do {
...
} while (!atomic.testAndSetRelaxed(value, desired, value));
In most CPU architectures, the value that was found in memory is known
to the compare-and-swap code, so this is more efficient than the
previous code. In architectures where the value is not known, the new
code is no worse than before.
The implementation sometimes modified an existing function, sometimes
it added a new one, depending on whether more registers were needed in
the assembly (like ARMv6-7), the code became more complex (ARMv5), the
optimizer failed (C++11), or it was just plain equivalent (MIPS).
Change-Id: I7d6d200ea9746ec8978a0c1e1969dbc3580b9285
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This implementation is based on GCC's implementation of std::hash<FP>, but only
to the extent of checking for zero before hashing the bits. The bit hasher is
the Qt one; I didn't even look what GCC uses.
The check against 0.0 is mandated by the requirement to have
\forall x,y: x == y => qHash(x) == qHash(y)
which would be violated for x = 0.0 and y = -0.0 if we only hashed the bits.
Implemented out-of-line to avoid potential FP-comparison warnings, as well
as to be able to use the file-static hash() functions, which gets inlined
unlike qHashBits(), which cannot be.
[ChangeLog][QtCore][QHash/QSet] Allowed to use float, double and long double
as QHash/QSet keys.
Change-Id: I38cec4afb860f17e9f8be7b67544e58b330f8fff
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This test can assume that the QObject::signalsBlocked property works as
advertized, so just check signalsBlocked() in repsonse to QSignalBlocker
manipulations.
Change-Id: I99e4ef9c4ed05c3840233d92a587636d2d78f59a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Change 85e57653 caused a compile error for code that does
Q_DECLARE_LOGGING_CATEGORY(cat);
//..
qCDebug(cat()) << // ...
error: C3848: expression having type 'const QLoggingCategory' would lose
some const-volatile qualifiers in order to call 'QLoggingCategory
&QLoggingCategory::operator ()(void)'
This is a regression from Qt 5.2. Fix the error by adding a const version
of operator()().
Change-Id: I2fb04f2e155962adee0f98089fc5a159000bef56
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Added basic functionality to socket for WinRT. Even though not
all auto tests pass yet, this patch can be seen as a foundation
for upcoming work in this area. Reading from and writing to TCP
socket works and one can listen for tcp connections.
Change-Id: Id4c25ba1c7187ed92b6368c785c4f62837faded7
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Conversion from UTC to local time will result in same datetime value,
if local time is in UTC.
Change-Id: Icd4ea57cb46cc97bcc8fce4f4e579bf64a4d4b10
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
It was not possible to get the actual process ID (in a cross-platform
manner) from QProcess, as the user would need to handle the returned
typedef (Q_PID) differently on Unix and Windows.
On Unix Q_PID is the actual process ID, but on Windows it's a pointer
to a PROCESS_INFORMATION structure, which among other fields contains
the process ID. Instead of returning a pointer on Windows,
QProcess::processId() will return the actual process ID on both Windows
and Unix.
[ChangeLog][QtCore][QProcess] Added processId() to QProcess. This
function will, unlike pid(), return the actual process identifier on
both Window and Unix.
Task-number: QTBUG-26136
Change-Id: I853ab721297e2dd9cda006666144179a9e25b73d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Initial submission of a new class QByteArrayList with the
purpose of aggregating and then joining QByteArray instances.
[ChangeLog][QtCore] Added new QByteArrayList class.
Change-Id: I2a9dc71ff7aadb19ebc129a0d47ac8cd33895924
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Allow configuration of logging rules from outside of the application,
either through a configuration file (.config/QtProject/qtlogging.ini),
or through a file specified by a QT_LOGGING_CONF environment
variable.
The logging rules from the different sources are concatenated: First
the rules from QtProject/qtlogging.ini are applied, then
QLoggingCategory::setLoggingRules(), finally from the environment.
This allows an application to overwrite/augment the system wide rules,
and in turn that can be tailored for a specific run by setting a
configuration in the environment variable.
[ChangeLog][QtCore][Logging] The logging framework can now be configured
with an .ini file.
Change-Id: I442efde1b7e0a2ebe135c6f6e0a4b656483fe4b1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Passing a constructor as second argument to foreach didn't work when
building with gcc.
For MSVC this already worked as a different foreach implementation is
used.
Change-Id: Id98444c699b4cebc14ea62076c5f7cba33ffb824
Reviewed-by: hjk <hjk121@nokiamail.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The debug output of all categories will be visible by default,
except from the "qt.*" categories. "qt.*" categories are private
and their default debug output will be hidden.
[ChangeLog][QtCore][Logging] Enable qCDebug's for all categories except qt one's
Change-Id: Ibe147c8bbe0835a63b3de782288b9c3251321d8f
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
The basedir xdg spec says:
"All paths set in these environment variables must be absolute.
If an implementation encounters a relative path in any of these variables it
should consider the path invalid and ignore it."
Therefore we ignore relative paths including the empty string.
Change-Id: I8f779b78981018051b16de23b2514f2e62b7ab39
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The slot object was deleted after the mutex was relocked, which caused
a deadlock in case the functor destructor locked the same mutex again.
Change-Id: I5b4fb22fdb4483f91c89915872bfd548c31b0eea
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Code units 0xD800 .. 0xDFFF are not UCS-4, so we can't happily return them.
Instead, if we encounter a stray surrogate, replace it with 0xFFFD, which
is what Unicode recommends anyhow.
References:
§3.9 Unicode Encoding Forms
D76: Unicode scalar value: Any Unicode code point except high-surrogate
and low surrogate code points.
As a result of this definition, the set of Unicode scalar values consists
of the ranges 0 to D7FF_16 and E000_16 to 10FFFF_16, inclusive.
[...]
UTF-32 encoding form: The Unicode encoding form that assigns each Unicode
scalar value to a single unsigned 32-bit code unit with the same numeric
value as the Unicode scalar value.
§ C.2 Encoding Forms in ISO/IEC 10646
UCS-4. UCS-4 stands for “Universal Character Set coded in 4 octets.” It is
now treated simply as a synonym for UTF-32, and is considered the canonical
form for representation of characters in 10646.
§ 3.9 Unicode Encoding Forms (Best Practices for Using U+FFFD)
and
§ 5.22 Best Practice for U+FFFD Substitution
Whenever an unconvertible offset is reached during conversion of a code
unit sequence:
1. The maximal subpart at that offset should be replaced by a single
U+FFFD.
2. The conversion should proceed at the offset immediately after the
maximal subpart.
[...]
Whenever an unconvertible offset is reached during conversion of a code
unit sequence to Unicode:
1. Find the longest code unit sequence that is the initial subsequence of
some sequence that could be converted. If there is such a sequence, replace
it with a single U+FFFD; otherwise replace a single code unit with a single
U+FFFD.
2. The conversion should proceed at the offset immediately after the
subsequence which has been replaced.
[ChangeLog][QtCore][QString] QString::toUcs4 now does not return invalid
UCS-4 code units belonging to the surrogate range (U+D800 to U+DFFF)
when the QString contains malformed UTF-16 data. Instead, U+FFFD
is returned in place of the malformed subsequence.
Change-Id: I19d7af03e749fea680fd5d9635439bc9d56558a9
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
That commit made QString::toXxx (8-bit) functions use C++11 ref
qualifiers, so we need to match it here.
Change-Id: I45b50464d36f858d012b12e0cb511aae347ddb6f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
UCS-4 iterator over a QString.
Kept private for now so we can still work on the API.
Done-with: Thiago
Change-Id: I377f8bb1921e591ee3292c08c3e097fb6bc7f0c4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Because they make sense. I'm even thinking that the char16_t version
should get a QString implicit constructor. Maybe both encodings.
Change-Id: Ifffc61dd890795fbbbd5f7cb5efb3e6287d1270e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This fixes a serious regression from
7d72516b52.
[ChangeLog] QFileSelector: the identifier for OS X has been changed back
to 'osx' from 'mac', and 'mac' and 'darwin' have now been added as
selectors for Darwin OS (which is the base of both OS X and iOS).
Task-number: QTBUG-35073
Change-Id: I83183e34c5a697338cc1ddcac33a41bd379ded12
Reviewed-by: Alan Alpert <aalpert@blackberry.com>
When changing a filter so that a previously empty proxy model becomes
populated sorting was not applied correctly.
This was caused by using mapToSource for getting source_sort_column
from proxy_sort_column. For an empty proxy model this won't work because
no valid proxy index can be created in this case.
We now directly use the root index column mapping instead by doing
essentially the same as QSortFilterProxyModelPrivate::proxy_to_source
but without the sanity checks needed for external use.
The sorting feature of QSortFilterProxyModel has always assumed that
the number of columns is specified by columnCount(QModelIndex()) so
the behavior doesn't change.
[ChangeLog][QtCore][QSortFilterProxyModel] Fixed sorting when a
previously empty proxy model becomes populated because of a change in
the filter.
Task-number: QTBUG-30662
Change-Id: I21322122e127889dfadc02f838f0119ed322dcab
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
introduced by b0b22e8d49 .
Change-Id: Ia57331ce9373a414f2bc56962412f20ef83bd7ca
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
This simplifies the code a lot and avoids silly mistakes where a
specific integer type is missing (such as char16_t).
Change-Id: Id91dfd1919e783e0a9af7bfa093ca560a01b22d1
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This aimed to disctinct joining types "L", "T", and "U" from just "U".
Unicode 6.3.0 has introduced a character with joining type "L" and
Unicode 7.0 will add a few more characters of joining type "L", so
we'll have to deal with it anyways.
[ChangeLog][QtCore][QChar] Added JoiningType enum and joiningType()
method that deprecates the old QChar::Joining enum and joining() method.
Change-Id: I4be3a3f745d944e689feb9b62d4ca86d1cf371b0
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
q_func() which is declared in Q_DECLARE_PUBLIC is usually private.
We should use q_ptr directly in QObjectPrivate::connect, otherwise
it does not compile when trying to access the private q_func
Change-Id: I235165a0994327102dbb31c390c2cafdffe806dc
Reviewed-by: Kurt Pattyn <pattyn.kurt@gmail.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The support for QArrayData variadic arguments without C++11 for GCC
has been removed in commit 69478da0f0 . Change the autotest to reflect
that, too.
Change-Id: I40468f5d67cb2db553fd7a7d5b604f46403ac538
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Even if the system is not under high load, this test can generate 4
updates on Windows. This is seems to be because the timer actually
triggers before its supposed to (sometimes the second start() triggers
an update right before the animation is done (at timestamp 399 for
instance), forcing it to generate yet another timer event in order to
reach the end)).
Under high load conditions, too many things can break this test,
usually it finishes even before the pause(), causing the
QVERIFY(animation.state() == QAbstractAnimation::Paused);
to fail.
Change-Id: Id94c0d16656675bc6165b7795f3c41a30616a3ba
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Allows us to sanity check the iOS build in the CI.
Change-Id: I16f9bfafef3988dcab6efd3155503ca0d0b4d1d8
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Add support for using qCDebug and friends in the 'printf style' way.
This allows an almost mechanical conversion of existing qDebug, qWarning,
qCritical macros, and allows avoiding the size overhead the streaming
style incurs (mostly due to inlined QDebug code).
To handle this gracefully we require variadic macros (part of
C++11/C99). For compilers not supporting variadic macros we fall back
to checking the category in QMessageLogger.
[ChangeLog][QtCore][Logging] Allow qCDebug macros to be used in a printf
style.
Change-Id: I5a8fb135dca504e1d621bb67bf4b2a50c73d41b9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some comparison operators comparing to const char *
where not implemented correctly.
Task-number: QTBUG-34024
Change-Id: Idbdc64c8ed93e88d9f2b2f55213bc785b33cb543
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The documentation implies that cd() and cdUp() functions return false if
the new directory is not readable, but that is not the case. It is an
obvious mistake in the documentation, because cd'ing into a nonreadable
directory is perfectly valid.
Provided also with a test to verify that cd() actually returns true with
nonreadable directories.
Change-Id: I4aa3e859b35c64266df510a203574e3701aea77c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Data::allocate(0) returns a pointer to read-only memory, updating d->size
will segfault. The safety check for this exists in all other QVector ctors
already.
Change-Id: Ida0fe4182de56ee62c7f91e8652cfafbfd7b8410
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commit 773dd01 introduced a general mingw platform scope, which
is cleaner and more flexible than matching the spec name.
Change-Id: Ie3a9cb791a83f7c8a51bc4e23069190c452ab521
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For example, QObject is non copyable (its copy constructor is deleted or
private via Q_DISABLE_COPY). It should still be allowed to pass a reference
to a QObject as an argument to as signal (or slot).
This fixes a compilation failure.
Task-number: QTBUG-36119
Change-Id: I9bcf477e347d69fdae2543c99781b6421883be78
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For convenience, it reads more easily (and is somewhat expected) to
be able to add a string to a QJsonArray like you might with a
QVariantList: QJsonArray() << "string". Previously, QJsonValue provided
a private void* ctor to explicitly deny this case because it would
implicitly convert to a boolean. This ctor provides a const char* ctor
(much like QVariant) that interprets the incoming text as utf8 and
creates a String type QJsonValue.
[ChangeLog][QtCore][QJsonValue] Added constructor to QJsonValue for const char *
Change-Id: Icafa954d3da1fb264f9d0fd7cd1a1d2fbbe15095
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
operators for +, +=, and << were added to QJsonArray to make
it easier to work with, and more closely resemble the Qt
container classes
[ChangeLog][QtCore][QJsonArray] Added convenience methods to QJsonArray for appending QJsonValues
Change-Id: I96e0a43015f7c0f980cbbef7f20bd2085ee04795
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
update-mime-database does not exist, so there is no point in
trying to build this test.
Change-Id: Id60f2f8fc3af33d3f7ae2fb4f1042356b60f6596
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Wolfgang Bremer <wbremer@blackberry.com>
* Mongolian and Phags-pa characters have been given a Joining_Type
classification for contextual shaping. As a part of these additions,
one Phags-pa character has the Joining_Type value of L (Left Joining),
which no character had been assigned before.
* The unassigned code points in the Currency Symbols block have been
given the Bidi_Class property value ET and the Line_Break property
value PR, to help implementations support new currency symbols,
when they are encoded.
* Hebrew letters and basic punctuation marks have been assigned
the newly introduced Word_Break property values Hebrew_Letter,
Single_Quote, and Double_Quote.
* The Bidi_Class property has been extended with four new values
for directional isolates.
For more details, see http://www.unicode.org/versions/Unicode6.3.0/
Change-Id: Iad62d02edc58a8497898dcd6d6c70d5aece317ea
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Change-Id: I9c0b110e36dd80c6a0b7275aa13bc548419aca9c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: John Layt <jlayt@kde.org>
Reviewed-by: Mehdi Fekari <mfekari@blackberry.com>
Fix parsing of ISO Date from being totally lenient to being semi-strict
by requiring the separator positions to be non-numeric.
[ChangeLog][Important Behavior Changes] Parsing of Qt::ISODate by
QDate::fromString() and QDateTime()::fromString() is not as lenient as
before, the date component separators are now required to be
non-numeric. This means a string like "2000901901" will no longer be
recognized as a valid ISO Date, but "2000/01/01" will still be even
though it doesn't strictly meet the ISO format of "2000-01-01".
Task-number: QTBUG-34141
Change-Id: I0e481144136c60d4cac61364b9b2c1d2cd1e78fc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Explicitly check that the QTimeZone is valid before trying to use it.
Change-Id: Iec415a2cb07071502fe71ee5ac92a7657e818f99
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's usually a bad idea to surround slots or signals with #ifdef since
moc may not parse it the same way the compiler does.
Change-Id: I6a3623ed7cb9fbc1b966df9d60f71b7fdf91acfe
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
There was a comment about the test failing for max() because of an
overflow. That happens if you're at UTC or ahead of it (to the East of
the Prime Meridian), which is how this test usually gets run (UTC,
Europe/Oslo, Europe/Helsinki, Pacific/Auckland). But if you're behind
UTC (to the West of the Prime Meridian), then the overflow happens for
min().
Change-Id: Iebba49d1303e9f18f5038f5cf23c77bf83e5fd4b
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
The encoder is in qjsonwriter.cpp, which requires special handling for
ASCII due to the use of escape sequences. The decoder is in
qjsonparser.cpp, which only scan one character at a time.
As a side-effect, the JSON parser now reports the UTF-8 error in the
first character with error, instead of the last. This is probably what
should have been expected.
Change-Id: I52e5bc30d71466b6a36098b4150c61b2e385d8e9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Like before, this is taken from the existing QUrl code and is optimized for
ASCII handling (for the same reasons). And like previously, make
QString::fromUtf8 use a stateless version of the codec, which is faster.
There's a small change in behavior in the decoding: we insert a U+FFFD for
each byte that cannot be decoded properly. Previously, it would "eat" all bad
high-bit bytes and replace them all with one single U+FFFD. Either behavior is
allowed by the UTF-8 specifications, even though this new behavior will cause
misalignment in the Bradley Kuhn sample UTF-8 text.
Change-Id: Ib1b1f0b4291293bab345acaf376e00204ed87565
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QVarLengthArray] Added the indexOf, lastIndexOf and
contains functions to QVarLengthArray. These functions make the class
more similar to QVector.
Change-Id: I9bd2b22bd8b7151c2d17aede36e5f2126570600b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
According to docs DynamicPropertyChange event should be sent from
setProperty function only when property is added, removed or
changed.
Change-Id: I080a27a4119a63580b03172f4b5b367338c6f440
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Windows 7 and later have LOCALE_SSHORTTIME, which is what we need.
Task-number: QTBUG-33718
Change-Id: I4c3f113d17102a37fb752de56f06b312f27c7887
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
This is only possible for two important reasons:
1) QString and QByteArray d pointers are both done with QArrayData and
that class does not care that the alignof(T) changes from 2 to 1,
so we can give the pointer from QString to QByteArray
(after adapting the allocated size, which is now double)
2) conversion from UTF16 to Latin1 always has fewer bytes (exactly half)
Change-Id: I17b2690c910f3de8db55156c6d6b5f55be06d827
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
tst_QObject is getting big, so make a separate test for QSignalBlocker,
but leave parts of signalsBlocked() in tst_QObject as that seemed to
have been the only check for blockSignals(true) actually blocking signal
emission.
Change-Id: I1cfac035e0e39203eea8626d43f316cc6244ee86
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
When QSignalBlocker was reviewed, move semantics were asked for.
This patch add them.
This makes QSignalBlocker usable as a by-value argument (to transfer
control of signal blocking into a function) as well as as a return
value (to transfer control of signal blocking out of a function).
Change-Id: I714aa2a283bb33dba76e860649e88ed202e913c5
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
To be able to call SetNamedPipeHandleState on stdin in a child
process, we must create a read-end pipe handle with the
FILE_WRITE_ATTRIBUTES flag set.
This can't be done with CreateNamedPipe but only with CreateFile.
Therefore we're creating the handles for the child process always
with CreateFile now. Besides, it's conceptually cleaner to have the
server handle of the named pipe in the calling process.
[ChangeLog][QtCore][Windows] Fix regression from Qt4 in QProcess.
It wasn't possible anymore to alter pipe modes of stdin in child
processes.
Task-number: QTBUG-35357
Change-Id: I85f09753d0c924bdc8a6cef1ea5dbe6b2299c604
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
It's still a relocation, but at least it can be marked read-only
after the relocation run, if indeed the dynamic linker goes to
such a length.
Change-Id: Ibadddac3ab99d2e58cc32cfd57311bddd3bdb0ef
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QHash::key() is O(n) and we're calling it n times. That can make repeated
calls to the meta object builder very slow, as for example QQmlPropertyMap
when inserting properties repeatedly.
Fortunately this is easy to fix, as the value in the hash map is also the
index, so we can simply iterate over the hash once. With the exception of
the class name, which we have to treat specially to ensure that it is always
the first entry in the string table.
Task-number: QTBUG-32720
Change-Id: Ic954c45c454107feee83216131f601cc69d4c63b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
It's unexpected that all messages generated by the stream version
of qDebug and friends have a trailing space. It also makes switching
to categorized logging (which only supports the stream version) difficult,
since all autotests checking for debug output would have to be adapted.
Task-number: QTBUG-15256
Change-Id: I8d627a8379dc273d9689f5611184f03607b73823
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This will break network paths passed as command line arguments.
Introduced by 4ff6951550 .
Task-number: QTBUG-35432
Task-number: QTBUG-30628
Change-Id: Ice9ce15275ef69e9e9e82daf5a303e7c56294368
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Make
QCommandLineParser::add{Help,Version}Option()
QCommandLineOption::setDefaultValue()
QCommandLineOptionPrivate::setNames()
have transaction semantics: either they succeed, or they change nothing.
It's trivial to provide this guarantee, so do it.
Add a test for the surprising property that setDefaultValue("") resets
defaultValues() to an empty QStringList instead of one that contains
the empty string.
Change-Id: I61623019de3c7d2e52c24f42cc2e23ec5fddc4da
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix isValidId() which was failing valid IDs because it was splitting
name parts by \ instead of /. it was also rejecting offset from UTC
formats names. Add unit tests.
Task-number: QTBUG-35025
Change-Id: I4d23d2e54f4a9fac9afcc4eff0a02d6f4af21385
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As the last line in the QObject destructor, we call setParentHelper(0) to
remove ourselves from the parent. In the process of that we also initiate the
QML parentChanged callback. The first thing that parentChanged callback used to
do (but now does it too late, after 26350b5ceafa0ade1328037f6234a7d288eb8f48 in
qtdeclarative) is to check if the object was deleted and then return. We could
re-introduce the check there, but I think it's cleaner to not bother calling
the callback on a dead object in the first place.
Change-Id: Ia4d43b65a9b3744a451b4c312a2d6f9c0e3b67dc
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
* Add a check for the case sensitivity of the file system, so that
unit tests can determine whether names of preference files with
different case should generate an error or not.
* Add check for OS X native file format in rainersSyncBugOnMac().
Task-number: QTBUG-32655
Done-with: Liang Qi <liang.qi@digia.com>
Change-Id: I76821653dd4ebc00e20abdbb5b79c1a80290dece
Reviewed-by: Liang Qi <liang.qi@digia.com>
For the conflicts in msvc_nmake.cpp the ifdefs are extended since we
need to support windows phone in the target branch while it is not there
in the current stable branch (as of Qt 5.2).
Conflicts:
configure
qmake/generators/win32/msvc_nmake.cpp
src/3rdparty/angle/src/libEGL/Surface.cpp
src/angle/src/common/common.pri
src/corelib/global/qglobal.h
src/corelib/io/qstandardpaths.cpp
src/plugins/platforms/qnx/qqnxintegration.cpp
src/plugins/platforms/qnx/qqnxscreeneventhandler.h
src/plugins/platforms/xcb/qglxintegration.h
src/widgets/kernel/win.pri
tests/auto/corelib/thread/qreadwritelock/tst_qreadwritelock.cpp
tests/auto/corelib/tools/qdatetime/tst_qdatetime.cpp
tests/auto/gui/text/qtextdocument/tst_qtextdocument.cpp
tools/configure/configureapp.cpp
Change-Id: I00b579eefebaf61d26ab9b00046d2b5bd5958812
Tweak a handful of tests which didn't compile on this platform.
Change-Id: I208d9eb289dfb226746c6d0163c3ea752485033b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Since contains() just wraps indexOf(), which has a QLatin1String overload,
add one for contains(), too, for consistency.
[ChangeLog][QtCore][QString] Added QLatin1String overload of contains()
Change-Id: I2acc628a51e00789fb2b90400cf0c523a5b5e65a
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The private method dateForLocalTime() was not checking that transitions
were valid, resulting in infinite looping when a time zone didn't have
any future transitions.
Change-Id: I0e5d07063861778dd86056a80c36fdd9f9d36133
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Fix parsing of TZ file abbreviations, to correctly return cases where
POSIX rule doesn't have separate DST rules, and where abbreviation
is a sub-string of another abbreviation, otherwise any toString() call
will crash.
Add test to exercise all available time zones, especially useful for TZ
file to confirm all file format variations dealt with. Fix parsing of
Version 3 of TZ file, and ICU display name, to allow all files generated
from release 2013f to pass, otherwise isValid() call will crash.
Task-number: QTBUG-34061
Change-Id: Ie0b6abc218adff1c8967eb33fdb0762041d2305f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The name Olson was misspelled as Olsen in the public api of QTimeZone
which is needed to be fixed before first public release in 5.2 would
freeze the api and prevent it being fixed. It has been decided that
renaming as IANA ID would be more future-proof.
Fixes to the private code will be done separately to keep this patch
against release branch to the minimum required.
Task-number: QTBUG-34735
Change-Id: I8ee90644862c907f6d1937b8536f0c02583ae736
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
GCC refuses to use a merely static const uint array in a constexpr function.
Fix by making the array constexpr if supported by the compiler.
Change-Id: Idd59d3f74f8f4e98aad82bc892f4a6469932df9f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This necessitates adding d==0 checks in QCollator. By documenting that
moved-from instances can only be assigned to or destroyed, we can
limit the functions in which to check for d==0 to the assignment
operator and the destructor.
Doing otherwise would destroy all advantages of move semantics by
introducing a heap allocation to re-populate other.d.
Add a test for this (QCollator didn't have any before).
Change-Id: Ic6ff202072822bebfd5e48259c3d0fa345a63118
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Rather than breaking at column 79 precisely, break entire words,
to improve readability.
Change-Id: Ie30db00f0e6ed95cce87480c3b91804826c6076b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Previously matched Qt.platform.os, however that can only provide one
string. Multiple selectors can be present at once, so we can provide
both unix and linux instead of having to pick the most specialized one.
Task-number: QTBUG-34796
Change-Id: I219517d740fa7385e923a9e09cb7e241378fbaee
Reviewed-by: David Faure <david.faure@kdab.com>
Up to now, the feature classe Uniform Initialization was subsumed by the
Q_COMPILER_INITIALIZER_LISTS flag together with support for
std::initializer_list.
This caused at least two problems:
1. On QNX, the standard libray does not ship <initializer_list>, even
though the compiler (a GCC 4.6, IIRC) supports it. But since there
was only one Q_COMPILER flag for both, support for the compiler-only
part of the feature had to be disabled, too.
2. MSVC 2013 supports initializer lists, but has a bug that renders full
uniform initialization support, as required for QUuid, useless.
By splitting the feature into two, we can separate them better, and do
so in QUuid, which is the only class that currently takes advantage of
uniform initialization (to provide constexpr constructors).
Since Q_COMPILER_INITIALIZER_LISTS worked as a flag for uniform
initialization so far, with the two known exceptions above,
UNIFORM_INIT is defined whenever INITIALIZER_LIST is, except that
I don't revert UNIFORM_INIT on QNX as I do for INITIALIZER_LISTS
and that I expect the MSVC 2013 features to set INITIALIZER_LIST,
but not UNIFORM_INIT.
Task-number: QTBUG-34705
Change-Id: I81916e950a0f3aab3de7977e0326d2de3d31b14c
Reviewed-by: Yuchen Deng <loaden@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
need to leave some items out like media folder access, as this is not
available by default and also requires certain capabilities to use
those.
Furthermore updated the tests for sandboxing as well as skip cmd.exe
related tests as that does not exist on WinRT.
Change-Id: I992b1e195b79615bea0be4f84f56cfb8f0d902bf
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Currently network is only required to gather the host info for one
test case. That does not justify to disable all other tests, which can
provide useful information on the state when doing a port. Hence
disable that testcase if no network is available.
Change-Id: I202ef49b3e07ae69ec85ee0432ae0a771a90e816
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Add few cases where conversion to or from LongLong was missing
We need to make it work if we want to use variant.canConvert<qint64>
[ChangeLog][QtCore][QVariant] Fixed QVariant::canConvert with longlong
Change-Id: I0f65073802b62d99250601dd90a8cd2e4d934b60
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The tracing API still misses some real-world exposure. Let's
re-do this in dev to have more time.
This reverts parts of following commits:
466e0dff4b7a47aebe9ea652bab6a78f0654ceb84162522edd32f27b43679ff81bdc1a
Change-Id: If97340c37b8b3363f597683336a8390d5ff386f1
Reviewed-by: hjk <hjk121@nokiamail.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
The problem is the verifyConstExpr<>() line involving the ~ operator.
The result as an integer is a value that can no longer be represented
in an int. This is known at compile time and thus template deduction,
which only has an int to match against, fails.
To fix, use an unsigned int as the first template argument of
verifyConstExpr<>().
Clang's error message for this is really sub-optimal, cf.
http://llvm.org/bugs/show_bug.cgi?id=17834
Change-Id: I3a77dc54d2bee12b016d75724ac1bd7801f4cf2d
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Make sure that the size of QIntegerForSize<N>::{Signed,Unsigned} is
actually N.
Change-Id: I221304f7c420e80758ef7b115bafb7cf1f8c8829
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This is what ConfigLocation was meant to be. A directory shared by all
applications. Unfortunately when I wrote the fallback on Windows,
I picked DataLocation (which is app-specific) instead of
GenericDataLocation (which is shared between apps). This makes it
impossible to have config files shared between apps, e.g. for libraries.
It also makes ConfigLocation quite inconsistent (on Windows one cannot
use it to load another app's config file, while it works everywhere else).
All this is fixed by GenericConfigLocation, which is shared between apps.
Change-Id: I23a755131061d4fea01e13dd1038fbd8ef333a5d
Reviewed-by: Alex Richardson <arichardson.kde@googlemail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Only DirectConnection is tested
Change-Id: I525c6a65428489c34e58d1d9600b4e5ebda733b9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
WinRT doesn't use the Windows Timezone backend, so don't build the
Windows test.
Change-Id: I32620546de3ad1f19402cc1359f8038200c915ec
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
This should be using qputenv; putenv is deprecated on MSVC.
Change-Id: I7c27cf5f7955624fa3553b7a34ab11c6fae462b8
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
The current synchronization mechanism was racy: decrementing waitingThreads
and then hoping that the wakeOne will wake a thread before its expiry
timeout happens. In other words, on timeout, a just-assigned task would
never run. And then no other task would run, if maxThreadCount is reached.
Fixed by using a queue of waiting threads (rather than just a count), and by
moving the wait condition into the thread itself, so we know precisely
which one we're waking up, and we can remove it from the set of waiting threads
before waking it up, and therefore it can determine on wakeup whether it
has work to do (caller removed it from the queue) or it expired (it's still
in the queue). This is reliable, whereas the return value from QWaitCondition::wait
isn't reliable, when the main thread has already decided that this thread
has work to do.
Task-number: QTBUG-3786
Change-Id: I1eac5d6c309daed7f483ac7a8074297bfda6ee32
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I don't think I ever worked on a project of non-trivial
size that didn't at some point add a QSignalBlocker.
This commit adds code, tests and documentation. Later
commits will convert naked blockSignals() calls to use
QSignalBlocker.
The implementation is purely inline to avoid the heavy
overhead of cross-dll function calls for this miniscule
task. This should not be a problem because QSignalBlocker
only uses public API and a pattern that we anyway need
to keep working until Qt 6, at least, so even changing
the implementation later will be no problem as the old
implementation lurking in non-recompiled code will be
acceptable, too.
This implementation is an evolution from KDTools'
KDSignalBlocker, with the following changes:
- Implements unblock() and reblock()
- Uses the return value of blockSignals() instead of a
separate signalsBlocked() call.
Change-Id: I1933dfd72a0f5190324be377cfca3c54cf3d6828
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
We must not include qt_windows.h in public headers,
otherwise we're cluttering the environment with a colorful
bouquet of Windows API preprocessor macros and typedefs.
Task-number: QTBUG-34058
Change-Id: I415717ea2a47f39e7f4b7ce1c1df9d49afc99278
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Use the correct identifier for the OS X operating system.
Change-Id: I7158a6b77e5e7418bc6b0a565f003500820a346d
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
The RFC 2822 date format should always use en_US locale for month and
day names instead of whatever the system locale is. Also remove some
duplicate code.
Change-Id: Ia2f7ee405b4e0e2f04980301783b9488628da73f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Changed the processing of non-character code handling in the UTF8 codec.
Non-character codes are now accepted in QStrings, QUrls and QJson strings.
Unit tests were adapted accordingly.
For more info about non-character codes,
see: http://www.unicode.org/versions/corrigendum9.html
[ChangeLog][QtCore][QUtf8]
UTF-8 now accepts non-character unicode points; these are not replaced
by the replacement character anymore
[ChangeLog][QtCore][QUrl]
QUrl now fully accepts non-character unicode points; they are encoded as
percent characters; they can also be pretty decoded
[ChangeLog][QtCore][QJson]
The Writer and the Parser now fully accept non-character unicode points.
Change-Id: I77cf4f0e6210741eac8082912a0b6118eced4f77
Task-number: QTBUG-33229
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Check if the datetime is valid before converting it to a different time
spec. If it is invalid then just change the spec to keep behavior
consistent with 5.1.
Task-number: QTBUG-34020
Change-Id: I6630ec1d50f810a2178ab3222bd32af018085f81
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change the default output of the logging framework to prefix messages
with a 'category: ' in case the category is not "default", so that e.g.
QLoggingCategory cat("qt.core.codes.windows");
qCWarning(cat) << "MultiByteToWideChar: Cannot convert multibyte text";
will print
qt.core.codes.windows: MultiByteToWideChar: Cannot convert multibyte text
while output from qWarning etc will show unaltered output. This should
help users to discover categories, and to group output together.
Change-Id: Iac2e1514f7dc5671966c36a440a119c857564cfc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: hjk <hjk121@nokiamail.com>
the function is a trivial wrapper for the QTextCodec one, so there is
little point in explicitly testing it.
Change-Id: I0c4950e5a54b7ffff9ba73a001cedb517497a596
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The pointer can be null. Going trough the reference invokes undefined
behavior here.
Change-Id: Ia84e4e732cdcbbaee0f5f0679765d18069ea8b2d
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
This yields the same results as previously and is more in line
with existing interfaces.
Change-Id: I0bf0372bf18f3bfde579385cddbe594bf71e3c52
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
qtbase/tests/auto/corelib/io/qfilesystemwatcher/tst_qfilesystemwatcher.cpp:652:36: warning: adding 'int' to a string does not append to the string [-Wstring-plus-int]
f.write(QByteArray("i am " + i));
~~~~~~~~^~~
qtbase/tests/auto/corelib/io/qfilesystemwatcher/tst_qfilesystemwatcher.cpp:652:36: note: use array indexing to silence this warning
f.write(QByteArray("i am " + i));
^
& [ ]
Change-Id: Icc966559be3c2cde3416193b8a1ddab7e0323ade
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: Ib1047731667ba8a7b9db2f62924eb42a6b85b4fd
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Change-Id: I88d98421978e0f5c55af8647f3f74c265b45bd37
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
- Remove irrelevant test subdirs via .pro files
- Follow WinCE codepaths where applicable
- Replace unsupported Win32 APIs with WinRT equivalents
This does not aim to fix any failures in the tests themselves; it only
makes them compile.
Change-Id: Ia82bc0cc402891f8f6238d4c261ee9152b51be80
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
On one suse box I have both /usr/bin/sh and /bin/sh which means that the
test should prefer the one first in the path instead of random order.
Change-Id: Ie94bf8404479fa42a36a8ee45e09986114693871
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The QCoreApplication test has quite a few test cases that we would like
to exercise using the GUI event-dispatcher. Instead of duplicating the
tests for the GUI dispatcher, we inherit tst_QCoreApplication, which
also lets us add extra tests that are specific to tst_QGuiApplication.
Change-Id: Ib411457131b8d3fed871f682c1c0568577f6127d
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
At the Daylight Tme to Standard Time transition, the local time repeats
itself, i.e. 2am occurs twice. Qt's behavior when setting this using
the local time is ambiguous, as it depends on the system implementation
of mktime, which behaves differently on different platforms. Currently
this behavior remains undefined. When setting using an msecs or time_t
value however we can determine the correct instance to use and cache it
to ensure that any conversion back from local time to msecs is performed
consistantly on all platforms.
Note that caching this value will result in any calculations being wrong
should the system time zone change, or its rules change. This will be
fixed in Qt 5.3 when the system time zone change signal is implemented
and QDateTime switches to using QTimeZone instead of mktime to provide
consistnt behavior across platforms.
The QTimeZone spec does not require this fix as it already caches the
correct offset in setMSecsFromEpoch().
Change-Id: I799588db474e744a6d81e80f6a0442920569ebd3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This function is useful if a floating point comparison requires a
certain precision. The return value can be considered as the precision.
For instance, if you want to compare two 32-bit floating point values
and all you need is a 24-bit precision, you can use this function like
this:
if (qFloatDistance(a,b) < (1 << 7)) { // The last 7 bits are not
// significant
// precise enough
}
Task-number: QTBUG-32632
Change-Id: I020a58d2f9f9452ac3c510b4bb560dc806f0d93c
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Mac uses the CLDR format codes which need to be translated into their
Qt equivalent. The existing code mistranslates the year code, is
outdated for a number of new codes introduced in recent versions of
CLDR, and by default accepted any codes it didn't recognize.
This change updates support to the latest version of CLDR, fixes the
treatment of years, and defaults to ignoring any new format codes
added in the future.
Note that this change cannot have auto tests written as the system
locale formats change between versions of OSX. Testing must be
done manually by changing system locale and formats.
Task-number: QTBUG-25057
Change-Id: I69dda25b4a0b38d3971995644546306876922d57
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
In case of implicit memory sharing, QString::reserve caused data
truncation if given size was smaller than size of data.
Task-number: QTBUG-29664
Change-Id: If2da5ad051385635ebb829c18b5ebaa349f08e8a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Except where we're actually testing QCoreApplication::applicationName()
and friends.
Change-Id: I25514884c11f43a4f82b1f818f822dc3d79f69a3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Fixes the obvious race between the test of 'release' in the thread
and the setting of 'release' in the test function.
Change-Id: I92df52d7b18e8154f17229a3dbd4a0e58f4a3b5b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The code uses a QSignalSpy to check whether the thread started,
but the signal emission (and subsequent appending to the spy) and
the check for spy.count() before the final thr.wait() are not
synchronized:
The signal emission happens-after the thr.start() and -before the
final thr.wait(). Likewise, the spy.count() happens-after thr.start()
and -before thr.wait(), but neither one happens-before the other.
Thus, there is a data race.
The wait(200) between thr.start() and mutex.unlock() doesn't help,
either, because we check only that it doesn't return true, iow, we
check that it timed out. But it will happily do that if the thread
has not yet started executing, so there's no happens-before relation
to be had via that avenue, either.
I first fixed by moving the spy.count() check to after thr.wait().
In that case:
signal emission happens-before thread finishing
happens-before thr.wait() returning
happens-before spy.count()
so no race.
Arguably, that makes the check rather useless, so I decided to remove
it completely.
Change-Id: I6bb47c4114961ee6e9251cfebeb4b7794ba674a9
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Add support to QDateTime for time zones using the new QTimeZone class.
[ChangeLog][QtCore][QDateTime] Add support for a new Qt::TimeZone
spec to be used with QTimeZone to define times in a specific
time zone.
Change-Id: I21bfa52a8ba8989b55bb74e025d1f2b2b623b2a7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add backend implementation for Windows times zones.
Change-Id: I30946f6672488c3f1d1d05754e9479aa62cce46f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add a backend for TZ Files.
If available uses ICU for the display names and translations, otherwise
the abbreviation is used.
Change-Id: I58c777462810b1a76ea7bd95886836b70b8a3db5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Implement the new QTimeZone class based on the Olsen Time Zone ID's.
This is the base implementation and does not include the Platform
backends which are implemented separately.
This change does include a default UTC backed to be used if no Platform
backend is available, i.e. if QT_NO_SYSTEMLOCALE is set and ICU is not
configured. This backend also provides a default set of time zones in
the standard "UTC+00:00" offset format that are guaranteed to always
exist regardless of the Platform backend.
This change includes conversion functions between the Olsen ID's and
Windows ID's using a conversion table based on Unicode CLDR data.
This is implemented for all platforms for scenarios such as a Linux
program needing to communicate with a Windows Exchange Server using
the Windows ID.
The CLDR conversion table is included under the UNICODE license, see
http://unicode.org/copyright.html for details.
[ChangeLog][QtCore][QTimeZone] Added new QTimeZone class to support
time tone calculations using the host platform time zone database
and the Olsen time zone ID's.
Change-Id: Ibb417d08cf2663a0979d2be855d2c6ad6ad01509
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When using __LINE__ to construct unique names, use of Q_STATIC_ASSERT
is limited to one instance per line of code. On compilers that support
__COUNTER__ (GCC and MSVC, probably others), we can get around that
limitation by using that one to always get a new unique number, so
use it.
Change-Id: I89bcfaa32376b7a665f03e4275e89b13fa3e650d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
New API:
static QString QString::fromCFString(CFStringRef string);
CFStringRef QString::toCFString() const;
static QString QString::fromNSString(const NSString *string);
NSString *QString::toNSString() const;
static QUrl QUrl::fromCFURL(CFURLRef url);
CFURLRef QUrl::toCFURL() const;
static QUrl QUrl::fromNSURL(const NSURL *url);
NSURL * QUrl::toNSURL() const;
Add Q_OS_MAC-protected function declarations to header
files, add implementation to _mm files.
CF and NS types are forward-declared in the header
files to avoid including the CoreFoundation and Foundation
headers. This prevents accidental use of native types
in application code. Add helper macros for forward-
declaration to qglobal.h
Add cf_returns_retained/ns_returns_autoreleased attributes
to toCFString() and toNSURL(). These attributes assists
the clang static analyzer. Add Q_DECL_ helper macros
to qcompilerdetection.h.
Add test functions (in _mac.mm files) to the QString
and QUrl tests. Split out the test class declarations
into a separate headers files.
Change-Id: I60fd5e93f042316196284c3db0595835fe8c4ad4
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
This is consistent with other areas of Qt:
qmake, Qt.platform.os (QML), qbs.targetOS (QBS), and #define Q_OS_OSX.
Change-Id: Ibf98e6ba3556a14187dadae1b0235e9c907c9001
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Merge most parts of the qlogger framework from
git://gitorious.org/qtplayground/qlogger.git
The categorized logging feature is a replacement for qDebug, qWarning and
friends. With logging statements in an app/library, a developer can
turn on the statements they care about and turn off the ones they don't.
Most work for this was done by Wolfgang Beck and Lincoln Ramsay.
Task-number: QTBUG-25694
Change-Id: Ib0cdfbbf3694f86ad9ec553b2ea36f09a477cded
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add new method to return if the current time is Daylight Time.
[ChangeLog][QtCore][QDateTime] Added new method isDaylightTime() to
return if the datetime is in Daylight Time or not.
Change-Id: Icb93fd5dd0b2f7d83d2d4643eeb12922c1137e3e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When Daylight Time transtion goes from Standard Time to Daylight Time
there is a "missing" hour, i.e. at 2am CET the clock goes forward to
3am. Currently QDateTime ignores this gap and considers the time to be
valid and able to be manipulated. This change respects the transition,
so any time set in the missing hour is considered invalid, and any date
maths returns valid results.
The validity in the current time zone needs to be checked every time
isValid() is called in case the system time zone has changed since the
last time it was checked. This is done by calling mktime to check the
returned result matches the expected result. This could be very
inefficient, but the returned offset value is cached each time so
mktime is not required to be called again within each method call,
effectively meaning mktime is called the same number of times by
each method. Note that this means any new methods added must be
careful to ensure either isValid() or refreshLocalTime() is called
first by any method needing to use the UTC value.
[ChangeLog][QtCore][QDateTime] The Standard Time to Daylight Time
transition for Qt::LocalTime is now handled correctly. Any date set
in the "missing" hour is now considered invalid. All date math results
that fall into the missing hour will be automatically adjusted to a
valid time in the following hour.
Change-Id: Ia652c8511b45df15f4917acf12403ec01a7f08e7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change from storing the date and time as QDate and QTime to a serialised
msecs format. This format is a direct translation of the QDate and
QTime values, it is not the actual msecs since the Unix epoch. This
msecs format ensures we are always able to recreate the original QDate
and QTime values, but should still simplify the code and improve
performance.
Because we no longer store the explicit date and time we need to store
their isNull()/isValid() status separately.
The changes in storage results in the same memory footprint as before.
Note that this change does not optimize the code nor set out to fix the
known bugs, it only seeks to maintain the current behavior, although
some bugs are fixed implicitly. More bug fixes and optimizations will
follow.
[ChangeLog][Important Behavior Changes] The supported date range in
QDateTime has been reduced to about +/- 292 million years, the range
supported by the number of msecs since the Unix epoch of 1 Jan 1970
as stored in a qint64, and as able to be used in the
setMSecsSinceEpoch() and toMSecsSinceEpoch() methods.
Change-Id: I98804d8781909555d3313a3a7080eb8e70cb46ad
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On linux using QFileSystemWatcher with inotify backend when a watched
file is moved and added again to the watched files its path is not
replaced with the new one. This behavior prevents the emission of
the fileChanged signal with the wrong file path.
Task-number: QTBUG-33211
Change-Id: Ib45d8efdf5afbf8b8f6b4b26e43f3d6ee740aca6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Similar to commit 8b062418 (MetaType: Fix operator{+,-}(int)
with the type-erased const_iterators., 2013-09-11), explicitly
create a copy of the iterator and intialise it.
Change-Id: I8b9edef40ca00c826f72768cba4a0992e55371f8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Up to now, it was only possible to connect to functors in a direct
way, without being capable of using Qt::ConnectionType. This patch
allows for specifying a receiver for Functors and function
pointers, hence making it possible to specify effectively the
connection type.
To do this properly, it was needed to add an enum in FunctionPointer
representing whether the considered function is a member function
or not, to reduce ambiguity upon overloaded calls.
Moreover, now senders are checked for the existence of a slot obj
as well. This way, should the context be freed, the slot obj and
the functor contained in it will be freed as well.
On a side note, connecting to a static slot
(like QCoreApplication::quit) specifying the receiver object is
now compiling.
Change-Id: I46474099413b1dc6ca4db9934191d469baeef070
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
For easy cross-platform and cross-device UIs, automatic asset swapping
based on filename is being developed. This API provides the logic for
the swapping, so that applications can use it themselves with the same
logic as any automatic swapping done in application templates.
Selector set is initially minimal, aiming for just platform selection
and enabling a common selection mechanism for Qt platforms to use.
Change-Id: I219517d740fa7385e923a9e09cb7e241378f857a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The responsibility of sendWindowSystemEvents() is to process events from
the window system. Historially that logic was part of the QPA/QWS event
dispatcher, which naturally also sent posted events. Through refactoring,
the code at some point ended up in in the QWindowSystemInterface class,
still with the posting of events in place.
This resulted in QPA event dispatchers adopting a pattern of just calling
sendWindowSystemEvents(), as that would cover both posted and window system
events. Other event dispatchers would call sendWindowSystemEvents(), and
then use a base-class implementation from QtCore for processing events,
resulting in two calls to QCoreApplication::sendPostedEvents() per
iteration of processEvents(). This breaks the contract that processEvents
will only process posted events that has been queued up until then.
We fix this entanglement by removing the sendPostedEvents() call from
QWindowSystemInterface::sendWindowSystemEvents() and move it to the
respective event dispatchers. For some EDs it means an explicit call
to sendPostedEvents, while others were already doing sendPostedEvents
though a separate source (GLib), or using a base-class (UNIX/BB), and
did not need an extra call.
We still keep the ordering of the original sendWindowSystemEvents()
function of first sending posted events, and then processing any
window system events.
Task-number: QTBUG-33485
Change-Id: I8b069e76cea1f37875e72a034c11d09bf3fe166a
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
The old code smply copied 100 shorts from the pointer passed into the
ushortarray ctor, regardless of the actual bounds of the original array.
Fix by making the ctor take the array by deference, deducing the size
as a template parameter, and only copying that much.
Fixes asan trace:
==18660==ERROR: AddressSanitizer: memcpy-param-overlap: memory ranges [0x7fff3c56de00,0x7fff3c56dec8) and [0x7fff3c56dd60, 0x7fff3c56de28) overlap
#0 0x457161 in memcpy asan_interceptors.cc:330
#1 0x4c40fe in ushortarray::ushortarray(unsigned short*) qtbase/tests/auto/corelib/io/qurlinternal/tst_qurlinternal.cpp:62
#2 0x4b0437 in ushortarray::ushortarray(unsigned short*) qtbase/tests/auto/corelib/io/qurlinternal/tst_qurlinternal.cpp:63
#3 0x47b643 in tst_QUrlInternal::idna_testsuite_data() qtbase/tests/auto/corelib/io/qurlinternal/tst_qurlinternal.cpp:119
...
Change-Id: Ie497bc8d337bc680a562482ca71ace535797ffb3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
'val' was set to
QList<...>() << ... << ...
further down.
Fixes a Clang warning.
Change-Id: I5fe80d87dbe2c1d50652dfd7b6c5f4a9198cd467
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Q_STATIC_ASSERT gives better error with C++11 enabled.
Aslo the qt_check_for_QOBJECT_macro had warning on some compiler since
it used null reference
Change-Id: Ic6115da800064b00c50a5762f0b79f5f656bf750
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A number of QDateTime functions directly use or modify the data stored
in the private, but future changes to store msecs and status make this
maintenance more complicated. Where possible simplify this code to use
the standard msecs functions, standard constructors, or public api
instead. This greatly simplifies the functions and the following msecs
storage code changes.
This is an intermim step towards storing the time in msecs. Some
functions will be slower as a result of this change, optimization
will take place after all the msecs changes are completed.
Note this also removes a test that used valid QDates outside the range
of msecs, this change in behavior will be documented in the final
mscs change.
Change-Id: I6ef710f24babc7024091010064082e9be0b5bbfe
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Test the Daylight Time transitions. QDateTime does not correctly deal
with many of these scenarios so those tests are marked as QEXPECTFAIL.
These bugs will be progressively addressed in coming commits.
Change-Id: I01eba9d6143a792f081542cb198e221efcf28e98
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
The "base64url" encoding is defined in RFC 4648, which is the newest
version of Base64. There are also a few situations where the ending
'=' is not desired.
Change-Id: I9bb9fa55817b57d125189e4e795d6fde97caea6d
Reviewed-by: Richard J. Moore <rich@kde.org>
Add new public api to get and set the number of msecs since the start
of the day. Modify QDateTime to use the new msecs api.
[ChangeLog][QtCore][QTime] Added new methods fromMSecsSinceStartOfDay()
to create a new QTime from an msecs value, and msecsSinceStartOfDay()
to return the QTime as the number of msecs since the start of the day.
Change-Id: I285b725b883f1f5524fda87ca81bd64ed99fe6f4
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
This avoids dynamic construction of the private class. According to
the benchmark we go from 4,550 to 3,900 instruction reads per iteration.
(without change 32629676 the baseline is 5,600)
Change-Id: I5df925e30dbd49bdde87173e481820574ce5abe1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make sure we don't modify the lhs. Instead copy it and advance the
copy.
Change-Id: I3440e8e175bfc299f8f83b816faca54fa3f79e43
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Any known smart pointer in a QVariant can be handled in this way. The
metatype system can be informed of new smart pointer types using an
existing macro which is now documented.
This is very similar to the existing infrastructure
for containers.
Change-Id: Iac4f9fabbc5a0626c04e1185d51d720b8b54603d
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
New functions left, right, mid were missing in the api.
Change-Id: I3590a84431555d009d5012b204c111385bdceed3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
which would interpret 'path' as a hostname.
The check is in the public setPath so that the internal one can still
support parsing URLs such as ftp://ftp.example.com//path.
[ChangeLog][Important Behavior Changes][QUrl and QUrlQuery]QUrl now
normalizes the path given in setPath, removing ./ and ../ and duplicate
slashes.
Change-Id: I05ccd8a1d813de45e460384239c059418a8e6a08
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
-DKEY="VALUE" was correctly turned into -DKEY=VALUE,
but -DKEY=\"VALUE\" was turned into -DKEY=\VALUE"
due to the erroneous check ('quote' is still 0 when
encountering the first '\' character).
This fixes QCoreApplication::arguments() as used by
moc.exe after porting to QCommandLineParser.
Further investigation shows that double-quotes and single-quotes
are handled differently. The tests now ensure that this parser
respects what Windows sends in argv, and in particular that
QTBUG-15379 doesn't regress, as well as fixing QTBUG-30628.
Task-number: QTBUG-15379, QTBUG-30628
Change-Id: I95062c9a6022632b321b2f6fae3089f07be7b5c6
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Replace that need with a macro so that registration of the
container helper conversions is done at the time of registration
of the container (usually when it is put into a QVariant).
Change-Id: I823fb3fdbce306ebc9f146675ac43724cec678d5
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
