In German layout, "Ctrl+]" is "Ctrl+AltGr+9".
Task-number: QTBUG-51848
Change-Id: I8c05c13a4d46c0818ce4f56ce476c5310a677af2
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Avoid unnecessary allocations.
Create QString from QStringRef only where necessary.
Change-Id: I8f2a7dce51430162c84328e23ab3cc071227d6ae
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The previous definition of signals does not need to be "public". It may
have been something else.
Change-Id: Id69569111e7d4e619e22ffff144b4855e6acdbef
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
it's used outside qtbase (by qtimageformats), so this is needed for
modular builds to work.
Change-Id: I3dffa76178502894bd063af366bd9a74be3b316a
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Also made a small comment fix
Task-number: QTBUG-53605
Change-Id: Ica9a06fe7a70f92f2a19a6df3ffdeaf1985e2eb6
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
It was added in 2.6.22. If we pass it to 2.6.21, we'll get -ENOSYS,
which is bad for QMutex. This fix simply defines it to 0 if the header
doesn't define it.
But as a consequence: if Qt is built with newer kernel headers, it won't
run on older versions. It's not likely that someone is still using Qt
5.7 on a 2.6.21 kernel (v2.6.21.7 was released on 2007-08-04).
Change-Id: Icb178bb113bb437c9b67fffd1451dd7bb964f0c8
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
protocolServerSide test fails with 'ssl3-any' and 'tls1.0-any' combo
on RHEL 7.2 with OpenSSL v1.0.1e-fips, it would work as OPENSSL_NO_SSL2
code-path, but OPENSSL_NO_SSL2 is not defined, so socket is in state
connected while it's expected to be unconnected.
Task-number: QTBUG-53608
Change-Id: Ib321b95129a6ab5b0691b40cb4acc612125633b2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
setEmptyDefaultConfiguration - this test (and this was stated explicitly
in comments!) must be the last test to run, otherwise, it can make subsequent
tests fail.
-exitLoop must be in 'protected slots' section not to be executed as a test,
since ... it's aux function, not a test.
Task-number: QTBUG-53608
Task-number: QTBUG-53603
Change-Id: I49d6d57ba927ecc4f20ae2d9325ad02fa46b0922
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Since 5.7 we can write downloaded byte arrays directly to the
QIODevice's internal read buffer without any memcpy/alloc overhead.
This makes various other buffers redundant, so remove them.
Task-number: QTBUG-45926
Change-Id: I577af70f856c9b852b7569a0070ae2bcbb4faaae
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Markus Goetz (Woboq GmbH) <markus@woboq.com>
Small adjustment to a76d709. Instead of removing the selection
handles immediately when an object loses focus, we choose to
animate them out the same way we do when we lose selection.
We do this by setting the handle visibility to false, which will
trigger the fade-out animation. Then we wait a for the animation
to finish before we remove and delete them fully.
Change-Id: Iaa93969af086000d9e1cf8a39bd12c6a8b70c89e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
A cast is not a conversion. If the value is not already a string type
we are just getting an empty string for all metatypes that can be
converted to string.
Change-Id: I4643cc9fd509c21568fdc2133403c3ed8cb38a10
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
it ends up in QtGui via two different routes (freetype and the png
handler), and we really don't want to have two copies of it in there.
Change-Id: I40760bcb6c615b90ed9f402450bb657c77884613
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This routine is often called to down-convert pixmaps and backing
stores to RGB32.
This patch replaces a comparison in each pixel, with a single AND in
each pixel and a comparison at each line. The new form is also auto-
vectorized by at least GCC.
Change-Id: I3e07585a3ec12f888321d35da57ac99b561dbec4
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Add convenience QWindowsWindow::formatWindowTitle() and use
that in QWindowsIntegration::createPlatformWindow().
Task-number: QTBUG-53394
Change-Id: I76ebade97c5af71ffa3d11075511b94a54a3dbf8
Reviewed-by: J-P Nurmi <jpnurmi@qt.io>
Both checks are not relevant in Qt's context and were skipped before but
they sneaked back in with the latest ANGLE update.
Change-Id: Ic44de5468a3254afd76ef4804d97d245676daeb1
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Affects systems like the NVIDIA DRIVE CX. This did not show up so far
because there was no error when Q_PROCESSOR_ARM was not set.
Task-number: QTBUG-53493
Change-Id: I107155b6dc1a881eca6f57374ad8db4458875243
Reviewed-by: Dominik Holland <dominik.holland@pelagicore.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Apple Mail will pick up and attempt to use the vCard
flavor, which then fails since the data Qt placed
on the clipboard is not actually a valid vCard.
Place data in the vCard format on the clipboard
only if the mime type is “text/vcard”.
[ChangeLog][OS X] Pasting text from Qt applications
to Apple Mail now works.
[ChangeLog][OS X] “text/vcard” is now required as
the mime type when placing vCards on the clipboard.
Task-number: QTBUG-48953
Change-Id: Id029b20317f2c5ad8ae225912484de3c97498d29
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
When a URL is dropped on a Firefox window, the "text/x-moz-url" data
takes precedence over the "text/uri-list". The "text/x-moz-url" is
interpreted as UTF16, however, the data from Qt 5 applications is not
in the correct format. The code to create correct UTF16 data exists,
but it is not called for two reasons: The atomName will never be
"text/x-moz-url" because it is changed to "text/uri-list" by
mimeAtomToString() and the InternalMimeData::hasFormatHelper() case is
already handled above and the else part will never be considered.
This patch fixes the check and brings it into the right order.
Task-number: QTBUG-49947
Change-Id: I5ebd31914cc6c1417c513c1ff09e0e858a16915d
Reviewed-by: Dmitry Shachnev <mitya57@gmail.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
When dropping URLs from Firefox or Chrome, the contents are encoded as
UTF16, but not correctly decoded. Moreover, the special handling of
"text/x-moz-url" drops does not work because this format is converted to
"text/uri-list" before. This fixes the handling for URL list and also
for UTF16 "text/html".
Task-number: QTBUG-47981
Change-Id: I1153f21ede07b2bfe4d104e0fe8bc8487ec5c165
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
QMenuBar now receives a parent changed event for each of its parent,
grand-parent, ... This fixes a crash caused by an invalid QWidget
pointer and makes sure the keyboard shortcuts events are relayed to the
menu bar in all parenting/re-parenting cases by installing an event
filter on each parent
Task-number: QTBUG-53205
Change-Id: I419e6cbc52e28a67fb08a848a7161b4cb8ae4ae5
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
While previous SDKs used the form "CE_SDK (CE_ARCH)" in their
configuration/platform names, this is not true fo the Toradex SDK.
Inside Visual Studio the platform is only called "Toradex_CE800"
instead of "Toradex_CE800 (ARMV7)".
In order not to break other SDKs CE_PLATFORMNAME is introduced and
used in the wince80colibri-armv7-msvc2012 mkspec. If the variable
is set qmake uses it as the platform name in its vcproj generator.
Change-Id: Icb501bf6446a9f617745a0d2c7a80b240680b043
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
make the 'cleaned' more robust by making sure we do not read past the
buffer in some cases. We must also use resize and not reserve on the
outpt buffer because reseve is meant as a hint and we are not supposed
to write past the size of the QByteArray even if it is reserved.
[ChangeLog][moc] Fixed crash on file ending with \\\r
Task-number: QTBUG-53441
Change-Id: I901e6c0ffc7f8877de3d07fd08cf26495461d294
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Robert Loehning <robert.loehning@qt.io>
As the functionality is not available for udp sockets trying to
call it will cause a crash on socket close.
Task-number: QTBUG-53424
Change-Id: Id80b36a248d12bf360135b2374c0a0efdab3a1f0
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
so far, each module had to do it in its .qmake.conf. by now, all modules
have been adjusted to the expected structure, so we can enable it
centrally.
Change-Id: I16b4e7581e51bfc54e71d2f7f852858ae0b47281
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Other popular specs have this as well.
Change-Id: I44245f37857d476b9ee53ecad021261b94214b2f
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
Reviewed-by: Louai Al-Khanji <louai.al-khanji@qt.io>
EGL headers including X headers has traditionally been problematic due
to getting macros for Status, None, etc.
In most cases this is not an issue anymore because on embedded one will
almost always use a driver targeting the framebuffer or DRM/KMS and
therefore the EGL headers do not pull in X dependencies.
Furthermore, Mesa supports MESA_EGL_NO_X11_HEADERS which we set, avoiding
the problem altogether with Mesa regardless of targeting X11 or KMS.
However, other drivers do not have this option. On i.MX6 for instance,
targeting X11 is problematic due to not having EGL_API_FB defined, which
in turn means the EGL headers pulls in X headers in order to be able to
define the native display and window types as Display and Window.
Try to play nice with this use case by reshuffling the includes and
undefining the problematic names.
This restores patch set 2 from the previously merged, and then reverted
commit. This here is safe since the egl.h include and the following undefs
are only done internally for eglfs and can have therefore no effect on
other code.
Task-number: QTBUG-52928
Change-Id: I383e783d5064dc8fb41f3ef56d2a4f4fcd31a6cf
Reviewed-by: Louai Al-Khanji <louai.al-khanji@qt.io>
Remove _POSIX_C_SOURCE usage as the reason why it was added is not
clear anymore and it causes compile errors on BSD systems if not
circumvented by adding further defines to re-enable function calls
hidden by the _POSIX_C_SOURCE define. (__BSD_VISIBLE on FreeBSD/OpenBSD
and _NETBSD_SOURCE on NetBSD)
Change-Id: Ic6b49ddcd6c481b0f2acd598cea5470604e00507
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
don't pretend that these two flags can be set separately - the
configures set them in tandem.
Change-Id: Ib0beae0152de09026d4627fd3ae0feabd9ce1b81
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
To compile the kms qpa plugin, only libdrm is needed.
Remove the libudev dependency for the compile check to enable
building of the qpa plugin on platforms where libudev is not present
such as BSD systems (but where KMS works)
Change-Id: Icd0be70a8949578a6158d523428706890a9674eb
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
When compiling on Windows to for example Android, we may be using the unix
generator, but the make command may be mingw32-make.
Task-number: QTBUG-53038
Change-Id: If8d1e1bea733cf1b4ed837c423a34ecfb3cafd1f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Remove the extra write buffer from QLocalSocketPrivate and use
QIODevice's new internal write buffer.
Change-Id: I4297774ee89da2df59782adae8b804296e7f3301
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Use QRingBuffer::append instead of an explicit reserve + memcpy.
Change-Id: I237d1e43a377e156c148e89e410e15e400e1e426
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Using multiple concurrent requests can cause a delay between a socket
closing and getting deleted. At that point the state was closingDown,
but not wasDeleted yet. Especially on slower arm devices, callbacks are
done from another thread causing synchronization issues.
Hence closingDown needs to be synced and handleReadyRead needs to have
more criterias to return early to avoid invalid access crashes.
Easiest to reproduce is heavy scrolling on the mapviewer example when it
downloads a huge amount of tiles and cancels those requests when not in
view anymore.
Change-Id: I442b6243bbefb3af938b6b1b3739a6a85b4887c0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Allows to get rid of some QStringLiterals, reducing QtGui
text size by ~2Kib.
Change-Id: Ic033fad5673aadc85930842dfccc24299df154f7
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
QDialogButtonBox does not have translations, it queries
QPlatformTheme for button texts. So in order to ensure
that the buttons added to QColorDialog natively are
translated it should be set to use QPlatformTheme instead.
Change-Id: I67d0e509398aa81f9de9b8785544c1e23bb596d9
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QVariant::canConvert<Enum> was returning true for everything can can be converted
to integer, but not for integer itself. That's because in QVariant::canConvert
we set the targetType to Int of it's an enum, but the Int->Int case was not
on the conversion matrix. So this commits adds it to the conversion matrix
and now QVariant::canConvert<Enum> returns consistently true for int itself.
But even tough canConvert returned true, it did not actualy do any conversion
to the enum type itself. Fix that by handling the case properlt in 'convert'
[ChangeLog][QtCore][QVariant] Fixed QVariant::canConvert and conversion from
integer types to enumeration types.
Task-number: QTBUG-53384
Change-Id: I6ac066f3900e31bfcea7af77836ddfc7730bd60b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
fbGetDisplay() expects a context pointer, but the config test was
calling this function without any arguments, causing the test to
fail even when the Vivante EGLFS device integration is actually
supported.
This got broken in 5.7 by the INTEGRITY changes in
9b35b0e8dc.
Task-number: QTBUG-53282
Change-Id: I233d93618b1c8a31d12b31139d3bfbd3d6429839
Done-with: Carlos Rafael Giani <dv@pseudoterminal.org>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
7edd10e6c added this compression feature, but some applications may
need to disable it.
[ChangeLog][X11] It's now possible to unset AA_CompressHighFrequencyEvents
to disable the new X event compression feature that was added in 5.6.0.
This is a replacement for the WA_NoX11EventCompression flag in Qt 4.
Task-number: QTBUG-44964
Change-Id: I37a9c8a4831f1c02eda0f03b54125f3255d25500
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
