The current implementation of qIsNull only returns true if the value is
positive zero. This behaviour is not useful for use cases like
QPointF::isNull, where QPointF(-0, -0).isNull() will return false.
There doesn't seem to be a reason why the function exhibits this
behaviour (-0.0 is not accounted for in the unit tests), and for the
case of QSizeF::scale it causes a bug: qIsNull is used to check for
division by 0.0 before it proceeds, which fails in the case of -0.0.
Task-number: QTBUG-7303
Change-Id: I767e5280bd26614e8e78ae62b274eb9bc4ade385
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Size constraints set on a widget before the creation of
the QWidgetWindow were lost (for example, Qt Creator's
preference page).
Task-number: QTBUG-26745
Change-Id: I7c2f5aed9c8817795603e5ad3c24418d66627bab
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: hjk <qthjk@ovi.com>
"The documentation states that "secsTo() does not take into account any
milliseconds", however, this is not the case. Given times 12:30:01.500
and 12:30:02.400 secsTo returns 0. If milliseconds are not taken into
account, I would expect this to return 1 (i.e. interprets the times as
12:30:01 and 12:30:02 thus truncating the milliseconds)."
Note that tests were also written for QDateTime::secsTo(), as it uses
QTime::secsTo internally. This addresses Javier's issue in the
comments of QTBUG-9304.
Task-number: QTBUG-9304
Change-Id: I9efe0c8f710db859c1d086d67ba3e5b349a56c4e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDateTime currently serialises its private Spec enum. If a user was to
deserialise the individual components of a QDateTime separately, the
resulting timeSpec may be invalid when cast to the Qt::TimeSpec enum.
E.g.:
QDateTime dateTime(QDate(2012, 8, 14), QTime(8, 0, 0), Qt::UTC);
// ... serialise
// ... deserialise date, time, spec separately.
// spec == 2, the value of QDateTimePrivate::UTC.
// spec != UTC, will be set to LocalUnknown.
QDateTime deserialised(date, time, spec);
This patch serialises QDateTime objects in UTC and the value of
timeSpec() as opposed to QDateTimePrivate's spec. This changes the
serialisation behaviour of QDateTime for version 13 of QDataStream.
Task-number: QTBUG-4057
Change-Id: If650e7960dca7b6ab44b8233410a6369c41df73a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The asymmetry is intentional: the getters can use toLatin1() because the
called functions, with a QUrl::FullyEncoded parameter, return ASCII
only. This gives a small performance improvement over the need to run
the UTF-8 encoder.
However, the data passed to setters could contain non-ASCII binary data,
in addition to the percent-encoded data. We can't use fromUtf8 because
it's binary and we can't use toPercentEncoded because it already encoded.
Change-Id: I5ecdb49be5af51ac86fd9764eb3a6aa96385f512
Reviewed-by: David Faure <faure@kde.org>
Just in case someone (like me) changes the function signatures or adds
new functions.
Change-Id: I1025fea012d95ffe89acaf799aa58fd2b0babc80
Reviewed-by: David Faure <faure@kde.org>
Windows CE does not have support for GetGlyphOutline.
So addGlyphToPath will not work. QML uses it for their
distance field rendering. One option to bypass this issue
is to use freetype as rendering backend.
Change-Id: I965254344945cbdad771a5d505fb61c1cc2087df
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Task-number: QTBUG-21804
Change-Id: I475166f3f60b1278089baa255ace4e18baeb568e
Reviewed-by: Jani Honkonen <jani.honkonen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
When a stylesheet was set on a parent widget then in some cases it would
not get applied to all the child widgets. This was because the order of
the children list may have been modified while it was being set on
children. By making a copy of the list we prevent this from being a
problem.
Task-number: QTBUG-26321
Change-Id: Iea6bf72c69a0c39746f7ef5e7893dda5a93ed7e5
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The listitem width was calculated incorrectly because spacing was
not considered. This fixes the second part of the reported bug where
spacing is set. Added some tests to catch the issue relating to the
reported bug.
Also added a test to check spacing in general.
Task-number: QTBUG-21804
Change-Id: Icc6326bce914264d882a60a9fc0ebe7d2a08dbf6
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
If the selected item is scrolled with keyboard keys the selected item
will go outside the visible area. The scrolling did not take hidden
items into account when calculating the amount to be scrolled.
Task-number: QTBUG-21804
Change-Id: I63da0248cec43be464898f9dc8167e739f00ccd0
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Those are regular, integer types, of 16- and 32-bit width,
respectively. C++11's std::atomic supports them, so we should too.
C++11 also supports wchar_t, but since that type's size can change, I
don't feel like support for it in Qt is pressing.
Change-Id: I945b641c91a8a98be82715f878c382dee58ac98b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This allows one to write code that depends on these values at
compile-time.
Change-Id: I7d78524ed9c70d4141360496d1d764dcbfa92e62
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The fix for this failing test is not yet agreed to. Disable it to
allow progress with the CI system while the fix is decided.
Task-number: QTBUG-26869
Change-Id: Ia8089b8e66d750353e7c1c69597916af0d042856
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This allows us to remove the odd hacks to get the static metaobject
for the QWidget* metatype.
The QWidget* is still an automatic metatype thanks to the QObject
partial template specialization. It is registered as a metatype
at runtime automatically in qwidgetsvariant.cpp.
Change-Id: Ie01b69eadf2cbe87af1a86c3284550f60dcf9e94
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This is necessary whenever QPersistentModelIndexes are changed. Omitting
it means that views are not able to react to the change, such as QTreeView
clearing its (manually held) QModelIndex cache, and the QItemSelectionModel
clearing the item from its storage.
It is necessary to change a QSortFilterProxyModel test which assumed setItem
does not have any such effect. That test is ported to setData instead.
Task-number: QTBUG-18539
Change-Id: Id7a602f18b9773ba4d11019418de886860d26d3e
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
qUncompressCorruptedData() no longer hangs on QNX 650 and Blackberry OS
sytems.
Change-Id: Id131f9f1c6dcd358c152675c7e29ab937052c1d0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Modeltest asserts before the patch, and passes afterward.
Task-number: QTBUG-26515
Change-Id: I08a89cd5c9c59613badcddbd056a3d0b8fbbca13
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
GCC 4.8 warns:
main.cpp:165:60: warning: ‘type’ may be used uninitialized in this function [-Wmaybe-uninitialized]
app.arguments().at(3).toInt());
^
Change-Id: Ib0f6847031437b588e14c6708fdddea5fd474b58
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The bug is that the connection to emit that signal can be made
obsolete if the connection is made too early and the model is replaced.
In the bug report, the connection is made by calling view() early (thereby
causing the creation of a view and a QItemSelectionModel which operates on
the built-in QItemSelectionModel, and then connecting to that
QItemSelectionModel), and then when QComboBox::setModel() is called later
the built-in view creates a new QItemSelectionModel for it. The bug was
that that new QItemSelectionModel is not connected to. This patch fixes that
bug.
Task-number: QTBUG-4454
Change-Id: Ibbdb8731f16ab071008b4a19dc2cc7ae03cebc84
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
There are some security issues with undo/redo. User should not be
able to get the erased password back in any situation. Therefore
redo must be disabled completely and undo is limited only for erasing
previously entered text.
Task-number: QTBUG-14226
Change-Id: I2b38aca84adbad1c14db76b56ad6303d56b35b4d
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Task-number: QTBUG-26687
Change-Id: Iaa0197efe64c61505e22e4a63a1f5c012af0bc78
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
GCC 4.8 warns:
src/testlib/qtestmouse.h:219:67: warning: ‘popupMenu’ may be used uninitialized in this function [-Wmaybe-uninitialized]
{ mouseEvent(MouseClick, widget, button, stateKey, pos, delay); }
tests/auto/widgets/widgets/qtoolbar/tst_qtoolbar.cpp:862:12: note: ‘popupMenu’ was declared here
Change-Id: I19cfd1790fbd948e97bf740d4412ccf3bb98a330
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
A new class called QAccessibleTextWidget was added.
This class should implement all methods of QAccessibleTextInterface and
QAccessibleEditableTextInterface which only need a QTextCursor, and it
defines two pure virtual methods, to obtain and set the text cursor, so
accessible implementations of widgets which use a text cursor can implement
these two methods.
QAccessibleTextEdit is now a subclass of QAccessibleTextWidget and most of
its methods were moved to QAccessibleTextWidget.
This is a forward port of ba5d7d608cc31fc63354fd74d85a1bad7780fc45 from
Qt 4.8, and is a prerequisite for forward-porting QPlainTextEdit
Change-Id: I6093c4fa7e0a77b84de779479c6074db006efec1
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
This is a plugin that bridges the QAccessible world
to AT-SPI 2 on Linux.
Change-Id: I7af22621ee6a3cefc723b137b7f227a611cf6641
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
This test is doing a brute-force mapping. Coupled with changes to
QCOMPARE last year, this now allocates and deallocates a lot of memory
per iteration. On my Sandybridge, it takes two minutes to run:
111136.781153 task-clock # 0.999 CPUs utilized
371,692,633,238 cycles # 3.344 GHz
182,641,818,708 stalled-cycles-frontend # 49.14% frontend cycles idle
57,951,552,830 stalled-cycles-backend # 15.59% backend cycles idle
477,216,332,971 instructions # 1.28 insns per cycle
# 0.38 stalled cycles per insn
86,959,637,669 branches # 782.456 M/sec
309,185,237 branch-misses # 0.36% of all branches
111.264868818 seconds time elapsed
Changing the iteration step from 1 to 5 reduces the runtime to about 5
seconds.
Change-Id: I9cad6f85f535f472319da7cd6c4aa28e12ddf1b7
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
These projects are expected to fail, but we need to make sure they fail
for the right reason.
Change-Id: I8a7caaa663060712c5c7113ef3b054feba2e2287
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
In the CI system, an environment variable is used to convey
the CMAKE_PREFIX_PATH, but that can not be relied upon.
Change-Id: Ie4fbacaac6ae18f95a3b4d1e796a4b4c91a418c4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test has recently timed out in CI, but appeared to be making
progress. Give it more time to complete.
Change-Id: Ied0fb7aad35ed6d5889dd585a7545687617e5e19
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Task-number: QTBUG-26793
Change-Id: Ic19cb6581cd5838d26713998e152772a5d12da4f
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The newer CMake version has the POSITION_INDEPENDENT_CODE property which is
what we need here. The CMake 2.8.8 implementation uses awkward and incomplete
string manipulation which I don't want to maintain for any amount of time
when Qt 5.0 is released.
Change-Id: If7ace9c6925ccdbf800f1863fa2368e55fa44d7f
Reviewed-by: Brad King <brad.king@kitware.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
These functions are a faster version of {,!}qgetenv().is{Null,Empty}(),
a common pattern in Qt code.
Their main advantage is that they don't need to allocate memory, so
they can be used in noexcept functions, or dynamic initialisation of
namespace-scope statics, because throwing in these contexts invokes
std::terminate().
Change-Id: I651c5bd72f450b5d7df76590f8791572fe992af5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Library code might need to know this, e.g. when calling an external
process, to give it the right configuration. (For instance when
ksycoca code calls kbuildsycoca to recreate the DB at the right place).
Change-Id: I343ddefff816586f9d391973c08ff1e1ad86bf0e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
SRCDIR was not defined for WinCE but it should no longer be used.
Fixed test case to use QFINDTESTDATA instead.
Change-Id: I07cbf7d42790d33e2d205d1682ec10e7577a92bd
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Commit f9a17d7f0f fixed it for the case
where the sender object is in a different thread at transition setup
time. However, it still didn't work if either the sender object or the
state machine was moved to a different thread at some later time,
before the machine was started.
Therefore: Bite the sour grape and traverse all the machine's
transitions when the machine is being started, registering those
signal transitions whose sender objects are in other threads.
This will increase the machine's startup time (proportional to the
number of transitions), but at least it works in all known scenarios,
meaning we don't have to document weird restrictions regarding the
order in which the user's operations have to be done.
Task-number: QTBUG-19789
Change-Id: I5f1dd1321994e49635f52be65cf56d2678ed1253
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
This is consistent with QAbstractButton, QCalendarWidget,
QDialogButtonBox and QGroupBox (ie, all other widgets with
a clicked signal)
Task-number: QTBUG-26105
Change-Id: Ieafe988b5c03216796b69a7cd70ac1a03fc12b0a
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Previously, a QVariant parameter would be wrapped inside a new
QVariant, and you would have to cast the QSignalSpy's QVariant to
a QVariant to get the actual value. This behavior was unintuitive
and undocumented.
Check if the parameter type is QVariant, and copy it directly if it
is. This makes the QSignalSpy's QVariant directly usable (no need to
"unwrap" the value in user code).
Existing tests that use QSignalSpy together with QVariant parameters
(such as tst_QPropertyAnimation::valueChanged()) and do cast the
QVariant parameter to a QVariant, continue to work after this change;
this is because qvariant_cast<QVariant>() returns its input value
(unchanged) when the type is not QMetaType::QVariant.
Task-number: QTBUG-21645
Change-Id: Ibfb171edd60c0d3f7ca1d5419e5c5f3d0380d5b3
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The argument has been obsoleted and not documented since 2007. Get rid
of it now before Qt 5.0
Task-number: QTBUG-25089
Change-Id: I91a5508a5e1606f5b5c289501295c67be4abe6a0
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Replace SRCDIR define by QFINDTESTDATA, simplify code.
- Introduce a test for stdout mode that verifies the newline
convention.
- Use a temporary directory as not to clobber the
test directory and introduce an environment variable
UIC_KEEP_GENERATED_FILES to keep them for error
analysis.
Task-number: QTBUG-26730
Change-Id: I22e3bb5a9ca92a1977c29b165ea605f1017baa02
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
