The PBXResourcesBuildPhase will optimize resources, such as turning XIB
files into NIB files, running pngcrush on images, turning string files
into binary plists, etc, so we prefer that if possible.
Unfortunatly this phase does not support custom paths, so whenever we
encounter bundle data with a custom path we fall back to the regular
PBXCopyFilesBuildPhase.
Change-Id: I539db03dd7982fd37293123b6428cdb695f64d2b
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
The Xcode generator creates a makefile for running 'make qmake', and the
makefile passes -o to ensure it writes to the same Xcode project. This
fails when qmake then treats -o foo.xcodeproj/project.xcproj as not only
setting the output filename, but also the output directory to foo.xcodeproj,
which results in the Xcode project trying to reference files relative
to this directory, such as '../main.cpp'.
Unfortunatly the output filename parsing happens too early for us to know
whether or not the generator is Xcode, so we just have to assume that
a certain combination of output filename and directories means we are
generating an Xcode project.
Change-Id: I0901d4db995f287c35cbbbd015683d5abda6d0f5
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Replace them with dashes, like Xcode itself does.
Change-Id: I302425363a2eef13394025cd4a9e414048ce55ce
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
There was quite a bit of cruft left over from older Xcode version. We
now produce Xcode 3.2 compatible files, similar to what Xcode would do
when asked to upgrade one of our generated files. In particular:
- Removed refType
- Set more lastKnownFileTypes
- Renamed defaultConfigurationIsName to defaultConfigurationName
- Add runOnlyForDeploymentPostprocessing = 0 to build phases
- Don't put buildSettings directly into PBXNativeTarget
- Don't write productSettingsXML
- Don't write startupPath
- Don't write name when path is the exact same
- Write empty buildSetting lists as empty string
- Don't write empty PBXBuildFile settings
- Don't write generated/neede filenames for PBXShellScriptBuildPhase
- Use PBXFileReference instad of PBXFrameworkReference
- Prune deprecated buildSetting variables
- Remove deprecated PBXBuildStyle sections
- Resolve correct CC/CPLUSPLUS/LDPLUSPLUS
- Write IPHONEOS_DEPLOYMENT_TARGET
Change-Id: Ia2365c2623fe898878bd10636c3b85145c1cff04
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Instead of letting each qmake variable have its own auto-generated name
we try to group common variables into similar groups as used by the Xcode
templates provided by Apple.
We also prevent the same files from ending up multiple times in a group.
Change-Id: I73b13d6071bb7b3cd1501c422a99c60743221485
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Move the Carbon dependency to the Cocoa platform plugin instead, where
it's actually used.
CoreFoundation was not used by any plugins and could be removed
completely.
Change-Id: I1c825cdf94e2cc348ea13519b894fd868be0d14a
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Added the following functions to QStringRef: toShort, toUShort, toInt,
toUInt, toLong, toULong, toLongLong, toULongLong, toFloat, and toDouble.
These functions use the corresponding functions found in QLocale.
Updated tst_qstringref.cpp to exercise the new functionality.
Change-Id: I38668a0cc7da0c101a62613fd16cb5a98286617f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Allows us to dynamically generate the command line option for iOS later,
and allows the user to override QMAKE_MACOSX_DEPLOYMENT_TARGET with the
expected effect on the command line options.
We unset PERL5LIB to ensure we get the system Perl libraries, since the
Mac OS 10.6 CI machine seems to have a broken XML::Parser::Expat from
macports/CPAN.
Change-Id: I04430c7b1daf9452d72f9a04a6b7f8d0d6926884
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Change-Id: I09286388e9af7ec472b394be87204746f8ae22b1
Reviewed-by: James Turner <james.turner@kdab.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
This now includes support for OpenGL 4.3
Change-Id: I964284843dffe806280e7f67cde67f17e84dc6df
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Must use ; as the path delimiter instead of :
Change-Id: I549e1652ef5bbae09c8fddec3e83ac9f52cec3a4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Before a buffer swap the new QEglFSHooks::waitForVSync method is
called which looks at QT_QPA_EGLFS_FORCEVSYNC and - if that is set
and non-null - calls ioctl with the FBIO_WAITFORVSYNC request on
the framebuffer device.
This is required on some embedded platforms where the driver does not
support VSYNC yet the Kernel provides a generic implementation.
I tested this using QML_RENDER_TIMING=1 which proofs that the frame
rate for an example of mine drops from >125fps to a straight ~60fps
with a few frames that take ~33ms (i.e. 30fps) as expected for VSYNC.
To prevent excessive open/close calls on the frame buffer device
per frame, the file descriptor is now cached. To keep the QEglFSHooks
interface as clean as possible this is done via a global static in
qeglfshooks_stub.cpp and initialized and freed in platformInit and
platformDestroy.
Change-Id: I4d31b227c65ff22aa089db0fbc62c89a59cbb6c7
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
These will be needed by the upcoming OpenGL enablers so move them
out of qopenglfunctions.h to somewhere that any opengl related file can
access them.
Change-Id: I0c788559397d446ec7210e2ad940da862179710d
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
The motivation for this patch is twofold:
1: we need a way (for iOS/Android) to tell the current window to remove
focus from the focus object when the user hides the input panel.
Otherwise, if the focus object is e.g a line edit, the cursor will
continue to blink inside it, which is wrong. As it stands, telling
the active window to deactivate
(by calling QWindowSystemInterface::handleWindowActivated(0)), will cause
the whole application to deactivate if no windows are active, which
is not what we want.
2: Qt currently understands just two application states, Activated and
Deactivated. On mobile platforms we can have other states
as well, like "suspended" on iOS. So controlling the application
state should not depend on window activation, but instead be controlled
through a separate API by the platform plugin.
This patch will add the following function:
QWindowSystemInterface::handleApplicationStateChanged(Qt::ApplicationState newState)
that lets us control the application state from the plugin. This also
means that we factor out application state handling from window
activation, which also gives us a way to remove focus from a window while
keeping the application active.
To not break existing desktop platforms that relies on application
activation being tied to window activation, we need to make this API
opt-in by using a platform integration capability hint. This is not optimal, but
found necessary after investigating several other solutions.
Which states (other that active/inactive) it makes sense
to add to Qt::ApplicationState will be a topic for later patches.
Change-Id: Ic6fdd3b66867abb67da43eba04ec86f06d82ff94
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
This fixes QMetaType detection of const reference arguments in signals
while connecting using the new syntax and Qt::QueuedConnection
const references should have the same QMetaType as non references.
That means we need to remove the const reference while getting the
QMetaType.
Change-Id: I9b2688da7fb9ae985aec0d8fa62a1165357ffe71
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Now that we always build against an SDK, we can be sure that the
function declaration for CTFontCopyDefaultCascadeListForLanguages
is available in the CoreText CTFont.h header.
Change-Id: I304a701548833e5c7774b4fd2e72eb8c541dd103
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
When cross compiling between two systems that use different
program file formats (such as PECOFF vs ELF) -x cannot be
relied upon, so -f should be used instead.
Change-Id: I4c80646b2b1fbdd6072589d4d9e852adda83424a
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This is because on some systems, /usr/bin/perl is too old to
run syncqt. MSYS is one such system.
Change-Id: I3e1aa2db557cc3919618350775e7218ae05aa93f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This change lets you call QHostInfo::lookupHost() with a null receiver
in order to warm up the DNS cache. This allows you to try to get the
DNS request in flight early.
Change-Id: Icfdd28146479aa534ae9ceb472f75e08aaa39cd2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It was not possible to extract data from the archive on OSX
which was created on Windows platform because of wrong
separators. Archive was created on Windows via QZipWriter and
opened on OSX with QZipReader. It consisted of a lots directories
and subdirectories with files. The solution is to use '/' separator
for internal representation.
Change-Id: Ic0837ca184bb6188129d53b587a5df2ec61e4e05
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Activate the window of the widget under mouse pointer before replay mouse
press event.
Change-Id: I9e699374accf108aa49b2a3c73d5e76631100dfd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
When the cursor specified is a bitmap one we cannot cache it based on
the shape as the pixmap set on the cursor may be different. Therefore
we should always create a new cursor in this instance.
Change-Id: I2c201590ff632490d76c1b423908ae32aa584eb6
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
When setFloating(true) is called before show, frame strut events
are not enabled for the native window (since there is none yet)
in QDockWidgetPrivate::setWindowState(). In that case, do
it in the show event handling.
Task-number: QTBUG-29012
Change-Id: I93b679f20200c149d608a1bcc65b4936a035c6a0
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
When QProcess->start() is called, Qt creates a pipe to the process to
get its exit value and output.
It does this with qt_create_pipe, which calls qt_safe_pipe.
qt_safe_pipe, on failure, returns 1. qt_create_pipe then
sets errno and returns void.
The calling function, QProcessPrivate::startProcess, does not check
errno, and thus continues to fork the process, assuming the pipe has been
created successfully.
The child process then has no way to pass its exit value to the calling
process, since the communication pipes it would normally use do not
exist, and thus when it exits it becomes a zombie.
As a bonus, if waitForFinished is called on a broken process, a crash
results because it is trying to wait on a pipe which does not exist.
The fix makes qt_create_pipe return an integer, and QProcess::startProcess
check the return value, set processError and not create the child
process.
Task-Number: QTBUG-18934
Change-Id: I2e1effdd0617be5b8c5492bcbcf5f2b1584b2241
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The QAbstractSocket API has been already using this as a return type. Hence,
this has already been exposed to the public API users, anyhow.
http://qt-project.org/doc/qt-5.0/qtnetwork/qabstractsocket.html#socketDescriptor
A minor mistake has also been fixed in this commit at the quintptr section.
Change-Id: I8143b3050428548ff6baee2e3a0bce4058ea8701
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Building against the local /System can cause build issues when for example
the headers have not been updated to reflect the system version. The system
headers are updated as part of installing the command line tools from within
Xcode, not as part of the system update process, so we might think we are
on 10.8, but the system headers will not reflect that, and we get build
breaks. It's preferable to always build against an SDK, so that we have
a known state for the OS X libraries and headers.
We choose the latests SDK by default, as recommended by Apple.
Change-Id: I79028217ff3a9cbe45aa4cb05ed6dd90388dee50
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
And update test to use the clang makespec now that it's the default.
Change-Id: Ifdd34c4220ad76f60b91fd6ef39d189f0f6525f9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Add an encrypted signal to QNAM and QNetworkReply to allow applications
to perform additional checks on the certificate chain beyond those done
as part of the standard SSL validation. This allows things like
certificate change notification to be implemented for QNAM as they can
be for QSSLSocket currently.
Change-Id: I693e3e6fec8b7040379b7e7f1f819550e6b2617f
Reviewed-by: Peter Hartmann <phartmann@rim.com>
Add intermediate certificates to our server sockets, and to our client
certs.
Change-Id: Ib5aa575473f9e84f337bebe35099506dd7d7e2ba
Task-Number: QTBUG-19825
Task-Number: QTBUG-13281
Reviewed-by: Peter Hartmann <phartmann@rim.com>
Instead of storing a single QSslCertificate for a the local cert, store
a list of them. This will allow us to handle server sockets that use a
certificate that is not issued directly from the CA root in future.
Change-Id: I9a36b9a99daa9c0bdd17f61b4ce1a7da746f2e96
Reviewed-by: Peter Hartmann <phartmann@rim.com>
When rendering to PDF using the PDF paint engine on Mac it would
consider it to be rendering as HIDPI when ScreenResolution was used.
This would mean nothing was being rendered at all in the PDF as a
result.
Task-number: QTBUG-28709
Change-Id: Ieb97ca9d0b47f6b96debbcf5e05e96c39292e412
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
We also have to make sure that when moving back to a page
that has a focusWidget(), the focus should go to the focusWidget()
Task-number: QTBUG-18242
Change-Id: Ibfa7d6361c1a456480b2f1584a88ef4c4f405709
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Exhausting the symbol list while looking for the
final right parenthesis means it is missing.
Task-number: QTBUG-29308
Change-Id: Iccf5897b0f5eb719699fd12d6c8e4a16ff189d9b
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>