qFuzzyIsNull has a fixed range, where qFuzzyCompare can tell if numbers
are different in a more relative range. Without it QPointFs that are
heavily scaled will be interpreted as identical, when they are quite
different at their own scale.
Task-number: QTBUG-60359
Task-number: QTBUG-62161
Change-Id: Ic4ba90e9e994aedff5548d690f053eb309b0a60b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It happens because our filesystemwatcher thinks it is subdirectory and not
two different paths
Task-number: QTBUG-60676
Change-Id: Ic753e9481cb26303a030044e0a5ab4d703bc529f
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
This is the counterpart of the previous commit.
[ChangeLog][QtCore] Added QCborStreamReader and QCborStreamWriter,
classes for low-level reading and writing of CBOR streams.
Change-Id: Ia0aac2f09e9245339951ffff13c72e4bffdf4a56
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
When a new model was set with setSourceModel() and the mapping was
built up, the destruction of the old model caused a reset in the
QSortFilterProxyModel which lead to an empty view or an assertion.
Now we properly disconnect the old model again and also clean up the old
mapping/persistent indexes when a new source model is set.
Task-number: QTBUG-44962
Task-number: QTBUG-67948
Task-number: QTBUG-68427
Change-Id: I2e0612899c210bde3ac0cfa59aefd78269deee5b
Reviewed-by: David Faure <david.faure@kdab.com>
[ChangeLog][QtCore][QSharedPointer] Fixed a problem that made create()
on a type with const qualification fail to compile.
Task-number: QTBUG-68300
Change-Id: I0825ff5b5f6f4c85939ffffd152f3e55e5b9caae
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
tst_QProcess hangs sometimes in QEMU. Based on my experiments in a debug VM the
offending test seems to be processesInMultipleThreads(), since that was were I
was able to reproduce the hanging in.
Since the whole test executable hangs, blacklisting is not enough, so skip the
test.
Task-number: QTBUG-67760
Change-Id: I34f8852be955a8612deac22b369f68d79a139d11
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The added test case contains the binary JSON equivalent of
["ž"]
with the modification that the string's length has been set to INT_MAX. In
Value::usedStorage this length is used through the pointer d like so
s = sizeof(int) + sizeof(ushort) * qFromLittleEndian(*(int *)d);
Because 2 * INT_MAX is UINT_MAX-1, the expression as a whole evaluates to 2,
which is considered a valid storage size. However, when converting this binary
JSON into ordinary JSON we will attempt to construct a QString of length
INT_MAX.
Fixed by using String::isValid instead of Value::usedStorage. This method
already takes care to avoid the overflow problem. Additionally, I've tried in
this patch to clarify the behavior of Value::isValid a bit by writing it in a
style that is hopefully more amenable to structural induction.
Finally, the test case added in my previous patch had the wrong file extension
and is renamed in this one.
Task-number: QTBUG-61969
Change-Id: I45d891f2467a71d8d105822ef7eb1a73c3efa67a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test relies on the existence of qt-project.org in resources. It
contains mimetype data and is automatically added. For static builds on
MSVC it is only added if it is actually needed though.
Change-Id: Icd1d74466607196f9b635205f7cb4d9b300ec4b8
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
If builtin_testdata is present additional data ends in inside of
resources so that tests can access this data when needed. The addiitonal
data has to be taken into account in the resource engine's test.
Change-Id: I10de6b9612ca49b314d77cfadd5b2360a5d90d53
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Change-Id: I399cc1aed3ee4151cf6adfd8f8780d8975604d52
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
The added test case is the binary JSON equivalent of
{"a":{"š":null}}
with two modifications. First, the length of the string "š" has been corrupted
to 0xFFFFFF00. Second and more import, the Base::size field of the inner object
has been reset to 0.
On its own the first modification would normally trigger a validation error.
However, due to the second modification the Value::usedStorage for the inner
object evaluates to 0, completely disabling all further validation of the
object's contents.
Attempting to convert this binary JSON into standard JSON will lead to the JSON
writer trying to construct a QString of length 0xFFFFFF00.
Fixed by validating also objects with usedStorage == 0.
Task-number: QTBUG-61969
Change-Id: I5e59383674dec9be89361759572c0d91d4e16e01
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The added test case is a binary JSON file describing an array which contains
itself. This file passes validation even though attempting to convert it to
plain JSON leads to an infinite loop. Fixed by rejecting it in validation.
Task-number: QTBUG-61969
Change-Id: Ib4472e9777d09840c30c384b24294e4744b02045
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This method takes a pointer+size pair, but begins reading through the pointer
without first checking the size parameter. Fixed by checking the size parameter.
A new test case is added with an empty binary json file. Although the test does
not fail under normal conditions, the problem can be detected using valgrind or
AddressSanitizer.
Task-number: QTBUG-61969
Change-Id: Ie91cc9a56dbc3c676472c614d4e633d7721b8481
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This allow to customize easily placeholders in QLineEdit by example.
Change-Id: I2bb379164376e1d88b42d6c86c2e5b8df99fbc56
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Replace the code for isRowSelected and isColumnSelected with
a much simpler algorithm for deciding if a row/column is selected.
In a model with a cross-hatch of unselectable indexes, the return values
of is(Column/Row)Selected would depend on the order in which the
selections were done.
Task-number: QTBUG-18001
Change-Id: I6aa4b1df7c07fae469a686041927fa8c42bc9b16
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This was originally added so that you could replace a T with
QAtomicInteger<T> in the same class and still keep ABI. However, for
legacy reasons, on 32-bit x86, types larger than 4 bytes keep an old
1990s alignment of only 4 bytes, but modern std::atomic<T> for those 8-
byte types enforces an alignment of 8 bytes. Therefore, the requirement
to keep alignment is not possible to guarantee.
In other words: you may not replace T with QAtomicInteger<T> or
std::atomic<T> and assume no ABI breakages in all platforms.
This is a requirement to implement atomicity. An 8-byte type aligned to
only a 4-byte boundary could cross a 16-byte boundary or, worse, cross a
cacheline boundary. Crossing the 16-byte boundary could be bad on some
processors, but crossing the cacheline boundary (addresses ending in
0x3C, 0x7C, 0xCC and 0xFC, or 4 out of 64 possible addresses or 6.25%)
is always bad: the CPUs cannot guarantee an atomic load or store
operation.
See also <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71660>.
Task-number: QTBUG-67858
Change-Id: If90a92b041d3442fa0a4fffd15283e4615474582
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
RCC generates code that registers resources automatically on program
startup via global constructors. When linking statically and nothing
references the symbols in the .o file compiled from the RCC generated
code, then the linker will discard the embedded resources and they will
not get initialized. That is why for static linking it is necessary to
explicitly initialize resources using the Q_INIT_RESOURCE macro.
We can avoid the need for the explicit initialization in the context of
plugins that are statically linked into the application. resources.prf
can generate a .cpp file with a helper function that contains all the
Q_INIT_RESOURCE calls for all resources in the plugin. That helper
function in turn is injected into the plugin entry point, which in turn
is guaranteed to be included in the final binary.
Change-Id: If1abf9c85ef92935020af073b989c58c1ae6ca63
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
That check is flaky on Windows. It doesn't seem to be testing Qt functionality.
I also don't see CreateFile2() documentation mentioning any guarantees that
opening the same file twice would give the same HANDLE each time.
Change-Id: Ica2e60571ae9fc39bf822803a2a9dd6add8323d7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Sometimes it is hard to find the line, when the warning
"QObject::connect: invalid null parameter" appears in the log.
This change adds the class names of the sender and receiver
to give a hint where to search for the wrong call to connect.
Change-Id: I00cead7d943f96d60f198cb3f0bed34ba10285c5
Reviewed-by: André Hartmann <aha_1980@gmx.de>
The drive has to be defined for every Windows configuration (also
including winrt).
Change-Id: I94a3131b8aec20cda97dc78f55b1d87aa10240e4
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Fix a mistaken #ifdef that should have been #if; and only call
QTimeZone::availableTimeZoneIds() once in transitionEachZone_data(),
while switching to use of a ranged-for.
Change-Id: Id27aae9ef450f21350283099c892ca7173884b94
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's useful when you need to check how long a hash will be without first
generating one.
[ChangeLog][QtCore][QCryptographicHash] Add a static method, hashLength,
which returns the length of the output of a hash function in bytes.
Change-Id: Id6a454016523de83d157fd95c50105c6db4bb1d9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This is a long overdue change so we don't break ADL of operator|.
I think will not break source or binary compatibility.
The problem is code like this:
namespace Foo {
struct MyStruct;
MyStruct operator|(MyStruct, MyStruct);
void someFunction() {
fooLabel->setAlignement(Qt::AlignLeft | Qt::AlignTop)
}
}
This would be an error before as ADL would find only the Foo::operator| and not
the global one since the arguments are not in the global namespace.
After this change, ADL works fine and this code compiles
This bites people with misterious error, see questions on
https://stackoverflow.com/questions/10755058/qflags-enum-type-conversion-fails-all-of-a-suddenhttps://stackoverflow.com/questions/39919142/broken-bitwise-or-operator-in-a-qt-project
[ChangeLog][QtCore] QFlags's operator| for enum types in the Qt namespace are
now declared in the Qt namespace itself.
Change-Id: I021bce11ec1521b4d8795a2cf3084a0be1960804
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The TZ database has recently revised its ccount of when they skipped a
day to cross the international date line, from skipping Jan 1st 1995
to skipping December 31st 1994. So Move the before-days check to
December 30th; and correct the Feb 2nd that was meant to be Jan 2nd
(and does need to remain so, for compatibility with systems with out
of date data).
Task-number: QTBUG-67497
Change-Id: I5b9483c553205817f995f91793662a5a85e03192
Reviewed-by: Liang Qi <liang.qi@qt.io>
The Q_ASSERT(mimePrivate.fromCache) at qmimedatabase.cpp:218
which I added in commit 7a5644d648, was being triggered when calling comment()
for invalid mimetypes such as db.mimeTypeForName("").
Change-Id: I8037041a4b435d2a5ba24ec94b7858e38b2f0bf2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Also use data-driven test to reduce duplication.
Change-Id: I9516e52267cb3c7b239030fd73dbbf23ac8f52f7
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This makes an irreversible global change: tests that do it will mess
with other tests. So make sure they're all last. This required
splitting up one test; and revealed another that secretly depended on
being run with C as default locale.
Task-number: QTBUG-67276
Change-Id: Ic24ef48b2c9bd5c37c1f11260b437628019624ca
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
Do not let a global qtlogging.ini interfere with an autotest.
This works around an issue on Ubuntu 17.10
Task-number: QTBUG-67385
Change-Id: I0d02835eb7a561b43fe0b98f4383c170c6d51303
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joni Jäntti <joni.jantti@qt.io>
Instead use QSignalSpy to wait directly for the expected events.
Change-Id: I319302ea7177fe690b5d885347c505454904518e
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
These two places were sort of manually implementing QTRY_VERIFY except that they
never time out.
Change-Id: I136e6c7400194327c0475c6acfc019825ccec1b5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Use QSignalSpy::wait or QTRY_VERIFY instead. This shaved off ~200 ms of the
running time of the test and is more reliable.
Some unconditional qWait()s still remain in this test. They are giving an
opportunity for the wrong thing to happen and thus are not waiting for any
specific condition to be fulfilled.
Task-number: QTBUG-63992
Change-Id: I25a4470fe8d6a5b8b5039b3ed77321d24faa1707
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This method will make QRegularExpression on par with QRegExp and
will allow to replace this class when a wildcard expression can be
set through an API (e.g. QSortFilterProxyModel::setFilterWildcard).
For other use cases, see QTBUG-34052.
[ChangeLog][QRegularExpression] Implemented support for wildcard
patterns.
Warning: QRegularExpression might not give the exact same result
as QRegExp as its implementation follows strictly the glob patterns
definition for the wildcard expressions.
Change-Id: I5ed4617ca679159430c3d46da3449f6b3100e366
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Many subclasses of QIODevice have a functionality to block execution
until some asynchronous I/O operation completes. In case we are using
QWinEventNotifier, a typical reimplemented waitFor{ReadyRead
|BytesWritten}() function could look like:
if (WaitForSingleObject(notifier.handle(),...) == WAIT_OBJECT_0) {
notifier.setEnabled(false);
ResetEvent(notifier.handle());
bool res = GetOverlappedResult(...);
...
return true;
}
Despite the fact that the operation ends synchronously, it leaves the
notifier in a state that indicates it has received the event, so its
next call to setEnabled(true) will produce a fake notification.
So, we should reset a notifier's history before enabling it again.
Change-Id: I62a9dd809ce6a7a40e9d8038f2a49299b36f8142
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Previously, we would divide by zero in BezierEase::findTForX if factorT3
was zero when solving the cubic equation.
This change fixes the problem by adding solutions for the special cases
where the cubic equation can be reduced to a quadratic or linear
equation.
This change also adds tests that cover cases where the equation becomes
quadratic, linear or invalid.
Task-number: QTBUG-67061
Change-Id: I2b59f7e0392eb807663c3c8927509fd8b226ebc7
Reviewed-by: Christian Stromme <christian.stromme@qt.io>
There are a couple of Qt classes where you almost always use the
same signal, for example QTimer::timeout, QPushButton::clicked,
and QAction::triggered.
Simply doing timer.connectTo([]{}) is much more convenient, less
tedious and even fun.
Not overloading connect() as it would be confusing to see the
receiver as first argument.
And not naming it onTimeout, as that's a popular way of doing it in
other frameworks. People would assume you could use on* with any signal.
If we ever have on* it should be all or nothing.
[ChangeLog][QtCore] Added QTimer::connectTo(), a shorthand way of
connecting to the timeout() signal.
Change-Id: Ida57e5442b13d50972ed585c3ea7be07e3d8e8d2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
disableNotifiersInActivatedSlot(disable_signaled2) fails, if a signaled
state of the event #2 is detected prior to the event #1. In this case,
we get a timeout on waiting for event #1 which was disabled by the
first notification.
So, accept a disabled state of the notifier in condition for successful
exit from the loop.
Change-Id: I8a2fe76f8ec9362556d1ca1fe0be39a93ed58977
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When the thread that got woken up by release() is supposed to release()
to wake up another thread, we were deadlocking. This happened because we
cleared the bit indicating that there was contention when the first
release(). Instead of storing a single bit, we now store the number of
threads waiting.
Task-number: QTBUG-66875
Change-Id: I72f5230ad59948f784eafffd15193873502ecba4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Matches glibc commit 9a0cc8c1bd7645bf3c988890ffb59639c07a5812.
[ChangeLog][QtCore][QUrl] Fixed a bug in parsing IPv6 addresses with
more than 4 hex digits in a component.
[ChangeLog][QtNetwork][QHostAddress] Fixed a bug in parsing IPv6
addresses with more than 4 hex digits in a component.
[1] https://sourceware.org/git/?p=glibc.git;a=commit;h=9a0cc8c1bd7645bf3c988890ffb59639c07a5812
Change-Id: I2701038131d91eb108aebb3bec16278e4efe3de2
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
When the source model of a QSortFilterProxyModel has rows removed, a
mapping is performed in order to figure out which corresponding rows in
the sorted and filtered view of the model are affected. In doing so it
constructs a vector of removal intervals which are subsequently used to
emit rowsRemoved signals. In the case where many rows are removed (e.g.
all of them), many removal intervals are identified that are often
adjacent and could be simplified, which is what this patch does. i.e.
instead of emitting 3 rowsRemoved for 0-3, 4-6, 7-12, now a single
rowsRemoved is emitted for 0-12.
Change-Id: Ia503091cc4928378c88257cd8b431582e9ff454e
Reviewed-by: David Faure <david.faure@kdab.com>
QDir::isAbsolutePath(name) thinks any path starting with a slash is
absolute; however, to return a valid absolute path, we need to put a
drive prefix onto such a name. So use QFileSystemEntry::isAbsolute()
for that check (it believes in the need for a drive, or UNC prefix)
and handle the absolute-but-for-drive case when it arises.
Add a regression test and make related changes to existing tests.
Task-number: QTBUG-50839
Change-Id: Id5d2b2586bb1423fa2d9375a298a4bb5241cffe0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The Q_GADGET macro cannot be used in templates. It can however be useful
to derive a template class from a Q_GADGET enabled base class to benefit
from type safety features in C++ (e.g. the class could represent an id
or handle for some C++ type).
For proper wrapping of a QVariant with a gadget value in a QJSValue, the
QMetaType::IsGadget flag must be set for the registered template
instance type - which does not happen prior to the fix because
IsGadgetHelper requires qt_check_for_QGADGET_macro to be defined in the
registered class but not in an ancestor class - in other words: The
class must declare Q_GADGET.
To overcome this, IsGadgetHelper/IsPointerToGadgetHelper can now
differentiate between a Q_GADGET flagged class (allowing
automatic registration) and a derived class, e.g. a template class
(forcing Q_DECLARE_METATYPE to be used explicitly).
[ChangeLog][QtCore][QMetaObject] It is now possible to use template
class instances inheriting from a Q_GADGET in Qml
Task-number: QTBUG-66744
Change-Id: I7632ad45cff79fa422b3f852ca0b963f35fab155
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Various tests were adapted to Q_OS_WIN to take account of the
deficiencies in its TZ APIs; which are now bypassed when ICU is
configured, as we use it instead. Replace some #if-ery on a local
define with QT_CONFIG(icu) and QMAKE_USE_PRIVATE += icu here, to match
in corelib/tools/tools.pri
Task-number: QTBUG-66367
Change-Id: Ia93abdeb7d12046310f0bb4a78c2669f8eecbbc2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The printVolumes function already adds line endings.
Change-Id: Id2553f881ccc0ab3c8b8fc77d3096dd5d968abda
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of the current working directory, which doesn't necessarily match
the location of the settings file.
Change-Id: Idffe2e87190cc9b6027fbba3b84e9dbf72ccf2f6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
all of these iterator classes already have a member operator+, which allows iter+int.
This commits addes non-member operator+, which allows int+iter, and forwards to the member
QList and QArrayData iterators now satisfy RandomAccessIterator concept
Change-Id: I25c1dd8cea299e735d5a5e288dbe23dc1d7a1933
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When first starting an Android app we have invocation order issue, to
load the platform plugin we create the default QLocale (needed by the
resource locator code to see if :/qt/etc/qt.conf exists) so when the
android platform plugin loads and creates its own QSystemLocale, the
QLocale defaultLocalePrivate is already created and pointing to
globalLocaleData which means that systemData won't be called and thus
the code that triggers the call to QLocalePrivate::updateSystemPrivate
won't be called when calling QLocale().
I thought of two ways of fixing this, one was calling
QLocalePrivate::updateSystemPrivatea() from the QAndroidSystemLocale
constructor, but giving the responsibility to not break things to the
plugin seems a little fragile, so making the check on QLocale()
seems better.
Without this patch an Android app doing
QApplication app(argc, argv);
qDebug() << QLocale().name();
qDebug() << QLocale().name();
qDebug() << QLocale::system().name();
qDebug() << QLocale().name();
would print
""
""
"ca_ES"
"ca_ES"
now it correctly prints "ca_ES" the four times.
Task-number: QTBUG-41385
Change-Id: I2cf419f59aa008fa3aca11295fe7d42c40bcc32e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Evaluating testlib's XML output in COIN would fail with:
"XML syntax error on line 7520: invalid UTF-8"
for the toLatin1() tests due to some Latin1/UTF8 mixup.
Add a helper function to convert the data to plain ASCII.
Task-number: QTQAINFRA-1797
Change-Id: I1c64878d4c2a67b8c2689905b5ffe6707b5963c1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test executable was not flaky in the normal sense that when run, it
sometimes passes and sometimes fails. Instead, in some builds it would fail
consistently and in some builds it would pass consistently.
The first test to fail was version(ok00, default to last version) which gives
"mylib" as the library name and -1 as the library version. The description
implies that QLibrary selects the biggest or last used version when given -1.
However, versions less than 0 are not used at all. Instead the loading uses only
the name to select the library. Change the description to match.
So why did the test sometimes pass, sometimes fail? The test uses two library
projects lib and lib2 which install two different major versions of libmylib.
That includes the symbolic links:
libmylib.so -> libmylib.so.1.0.0*
libmylib.so.1 -> libmylib.so.1.0.0*
libmylib.so.1.0 -> libmylib.so.1.0.0*
libmylib.so.1.0.0*
libmylib.so -> libmylib.so.2.0.0*
libmylib.so.2 -> libmylib.so.2.0.0*
libmylib.so.2.0 -> libmylib.so.2.0.0*
libmylib.so.2.0.0*
The key thing being that both set the libmylib.so symbolic link. In a
multithreaded installation it's undefined which happens to set the link last.
The test code expected libmylib.so to point to libmylib.so.2.0.0. Ensure that by
building and installing lib2 after lib.
Task-number: QTBUG-66722
Task-number: QTBUG-66216
Change-Id: Ic513c772902273049c28e43fc1d83d550aafcd23
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QJsonValue] fromVariant() conversion now converts
from QUrl and QUuid using special encoding forms to ensure best JSON
compatibility.
Change-Id: I56b444f9d6274221a3b7fffd150cdc5ca1f87ff1
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
For compatibility with other parsers that may expect it to be so.
Change-Id: I56b444f9d6274221a3b7fffd150cd66390f98fd5
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The refactoring to support multiple providers broke alias resolving
(e.g. "text/directory" would be an invalid mimetype, instead of being
resolved to "text/vcard"). The unittest didn't catch it because most of
it was running with a single mime directory (and therefore a single provider,
in the new model). Fixed by re-running a number of test methods once we
have a second mime directory.
Change-Id: Ib5da89ba79c11ed41813b2aff4bc71c30afcde7d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If _Thread_local is used on a block-scope declaration, it must be
combined with either static or extern to decide linkage.
Change-Id: I228b3520767197c6cdf5134ff5a666ab2aca33ea
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
They can be, if compiled with -Wl,-pie. Example:
$ file /usr/bin/ping
/usr/bin/ping: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 3.2.0
And you can't detect via the interpreter, since libraries can have
them too:
$ file /lib64/libc-2.26.so libQt5Core.so.5.11.0
/lib64/libc-2.26.so: ELF 64-bit LSB shared object, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2
libQt5Core.so.5.11.0: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 3.17.0
Change-Id: I940917d6763842499b18fffd15143bb80ce0e531
Reviewed-by: David Faure <david.faure@kdab.com>
[ChangeLog][QtCore][QByteArray] Added QByteArray::isUpper() and
QByteArray::isLower() to check if a byte array contains only uppercase
or only lowercase Latin1 letters.
Change-Id: I7ab3c775bc714138d4be259ac6fa2cfc70467ed4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix 'Too many segments for object format' errors for (Debug) builds
using Windows ICC.
Change-Id: Ie48f43199948477c426d0a4e557f039eda129b22
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix 'unresolved external symbol __imp_Reg*' errors for builds
using Windows ICC.
Change-Id: I99cb6d53c45cadb31b5675182753f168a7bf4ea3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test sometimes ended up with:
QThread: Destroyed while thread is still running
Received a fatal error.
This was because as a member variable of the local struct the QThread object was
sometimes destructed before the signal connection quitting it was handled. Fix
that by making sure that the thread is finished before finishing the test.
Also moved connecting to the state machine's signal to be before starting the
machine. Because the counting of QStateMachine::finished signal could hit 1
after the first signal is emitted and the test could pass without the code
working, check that both of the signals have been emitted.
Task-number: QTBUG-66372
Task-number: QTBUG-66216
Change-Id: If14141e39f37541032ddd8c6471daf40a77b0469
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Remove BLACKLIST files which are no longer valid because the mentioned
CI systems are no longer active:
- opensuse-13.1
- opensuse-42.1
- rhel-7.1
- rhel-7.2
- rhel-7.3
- ubuntu-14.04
or the testcases are no longer available:
- QTBUG_14292_filesystem in qactiongroup
Change-Id: I80a4397059fafba169096440fdc07d45c76a1ed8
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
If more than one VM tries to run the test at the same time, it times out. These
sharing violations were attempted to be worked around in 1c3dc8cfb, but the
workaround just leads to timeout, not success.
Task-number: QTQAINFRA-1727
Task-number: QTBUG-66216
Change-Id: If8bfd60dbb6575843680971d45b1c82e5beff534
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
[ChangeLog][QtCore][QString] Added the functions QString::isUpper
and QString::isLower to check if a string contains only uppercase
or only lowercase letters.
Change-Id: I12d3a47d4605eb4514842071e80a9ba0723d4e01
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
src/corelib/tools/qvarlengtharray.qdoc
src/corelib/tools/qvector.qdoc
Resolved documentation changes in favor of 017569f702,
which keeps the move overloads along with its const-ref sibling.
Change-Id: I0835b0b3211a418e5e50defc4cf315f0964fab79
Timeouts with subsequent failures to delete the temporary
directories have been observed in COIN.
Previously, QProcess:terminate() was used to end the processes,
which does not have any effect on console processes on Windows.
Add a helper function which resorts to kill() on failure
to terminate().
Change-Id: I05539d1703280d34b392f2e8ff8565b9a04d703c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This way, it's lossless.
This commit is a cherry-pick of ab1e507574,
which was reverted.
[ChangeLog][QtCore][QVariant] Conversions of QDateTime to strings now
contain the millisecond components.
Change-Id: I5e421e32396d44e4b39efffd150b744e40fff3a1
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Commit 8f52ad9fe0 ("ucstricmp: compare
null and empty strings equal") made sure empties and nulls would compare
equally, but may have broken the null vs non-empty comparison (which was
not tested). The commit message also said that it expected all callers
to handle null before calling into those functions, but that's not the
case for QStringView created from a null QString: the incoming "a"
pointer was null.
So just remove the checks for null pointers and rely on the size checks
doing the right thing.
[ChangeLog][QtCore][QString] Fixed a regression from 5.9 that caused
comparing default-constructed QStrings to be sorted after non-empty
strings.
Task-number: QTBUG-65939
Change-Id: I56b444f9d6274221a3b7fffd150c83ad46c599b6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
While we're at it, add a way to get it without the dashes too. I'm
calling it "id128", as in "128-bit ID", as seen in journald's sd_id128_t
type and the sd_id128_xxx() API.
[ChangeLog][QtCore][QUuid] Added a parameter to both toString() and
toByteArray() to allow controlling the use or not of the braces and
dashes in the string form.
Change-Id: I56b444f9d6274221a3b7fffd150cde706cfc5098
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This reverts commit ab1e507574. That was
supposed to be a minor behavior change, but ends up having visible
effects such as QtXmlPatterns xs:dateTime type now reporting sub-second
fractions. So we're reverting in 5.10 and re-applying in 5.11.
Change-Id: I741e49459c9a688c1c329d6cbd521cd4a0b2aa84
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Actually check that there's a T where ISO 8601 wants it (instead of
just skipping over whatever's there), with something after it; move
some declarations later; add some comments; and use the QStringRef API
more cleanly (so that it's easier to see what's going on). Simplify a
loop condition to avoid the need for a post-loop fix-up.
This incidentally prevents an assertion failure (which brought the
mess to my attention) parsing a short string as an ISO date-time; if
there's a T with nothing after it, we won't try to read at index -1 in
the following text. (The actual fail seen had a Z where the T should
have been, with nothing after it.)
Add tests for invalid ISOdate cases that triggered the assertion.
Task-number: QTBUG-66076
Change-Id: Ided9adf62a56d98f144bdf91b40f918e22bd82cd
Reviewed-by: Israel Lins Albuquerque <israelins85@yahoo.com.br>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit a9c111ed8c)
This is in preparation to adding CBOR support. We don't need yet another
dir for CBOR and placing it in src/corelib/json is just wrong.
Change-Id: I9741f017961b410c910dfffd14ffb9d870340fa6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QAbstractItemModel::dataChanged() gained an optional role parameter
with Qt5 which was not filled within QListWidgetItem/QStandardItem
setData() functions
Task-number: QTBUG-55903
Task-number: QTBUG-63766
Change-Id: I4da9346ef8401cc8633dc4b2ea7d00451d1e3942
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
The include is needed for std::unique_ptr on winrt.
Change-Id: I72a28bd0951cc947ac65877ccc35f464c757c444
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
The backwards iteration was done under the assumption that the only
valid modification of the winEventNotifierList in a slot connected to
activated() would be the removal of the notifier itself. This is wrong.
Instead, iterate forwards, like before 85403d0a, and check the index
against the current list size in every iteration. This ensures that we
do not run out of bounds while the list is modified.
Also, retry the activation loop if the list was modified by a slot
connected to activated(). This ensures that all notifiers with signaled
handles are activated.
Task-number: QTBUG-65940
Change-Id: I25f305463b9234f391abc51fe0628d02f49b6931
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This way, it's lossless.
Change-Id: I5e421e32396d44e4b39efffd150b744e40fff3a1
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The idx member of EventWithNotifier is unused.
Change-Id: I0f5aacaaad4b4e82c57ff7bb020586944014f139
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Adds inline handling of the C++17 type std::variant, so the type will
be resolved if converted into a QVariant.
Change-Id: I31809d70d7f347277389d42a3695836ec7a32d02
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commit 29bc68cf16 added support for
unsigned and commit 5ff7a3d96e later added
support for int. This commit adds support for qsizetype, which isn't int
on 64-bit platforms.
We do this by reorganizing the code and using the generic version of
__builtin_{add,sub,mul}_overflow from GCC 5 and Clang 3.8, which ICC 18
seems to support now too on Linux. That leaves older versions of GCC and
Clang, as well as MSVC, ICC on Windows, and the GHS compiler, to use the
generic implementations, as I've removed the assembly code those
versions of GCC and Clang on x86 are now uncommon.
Note: any older version of ICC probably breaks. We only support the
latest.
Change-Id: I9e2892cb6c374e93bcb7fffd14fc11bcd5f067a7
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The Embedded Android build (Boot to Qt Android injection) is defined by
having both Q_OS_ANDROID and Q_OS_ANDROID_EMBEDDED flags defined,
as well as having Qt config android-embedded.
This commit enables the possibility to build embedded Android builds.
(i.e. Qt build for Android baselayer only, without JNI)
Change-Id: I8406e959fdf1c8d9efebbbe53f1a391fa25f336a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Improves performance and STL compatibility by adding rvalue versions
of prepend and insert.
[ChangeLog][QtCore][QVarLengthArray] Added rvalue overloads of
prepend and insert.
[ChangeLog][QtCore][QVector] Added rvalue overloads of prepend
and insert.
[ChangeLog][QtCore][QVarLengthArray] Can now contain movable but
non-copyable types, such as std::unique_ptr.
Change-Id: I6c946acc5b67502c91c52ac5dea67cedb1af93a5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a regression test for bugs resulting from failure to take
account of the MS TZ APIs fake-DST handling of standard-time
transitions happening during DST. Has to skip the 2014 test on Win7,
as it's so old it doesn't know about the (for it) "future" transition.
Task-number: QTBUG-42021
Change-Id: I853b86d03a86f0269371bf1622bf63882fb8ee5d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When QFile::open is called with the NewOnly flag, the call will
fail if the file already exists. As usual, if the file does not exist,
it will be created. Like QTemporaryFile, there is a guarantee from
the operating system that you are not accidentally creating a new file
on top of an older file. When QFile::open is called with the
ExistingOnly flag, the call will fail if the file does not exist. The
ExistingOnly flag only provides new functionality when used with the
WriteOnly flag. For ReadOnly it provides no change in functionality,
as ReadOnly by itself already never creates.
Task-number: QTBUG-52244
Change-Id: I8e3206728f245f95172c225bf297023fb078fc6d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Data in item models is most often organized in rows, where each column
contains an attribute of the item represented by the row. Often when
sibling is used, it is to request another piece of data from the same
row. Having a specialized version makes this easier and less awkward
to do, simplifying
auto sibling = index.sibling(index.row(), columnOfInterest);
to
auto sibling = index.siblingAtColumn(columnOfInterest);
For symmetry reasons, siblingAtRow(rowOfInterest) was also added.
Change-Id: Ib203b2cdb16154cbb2680d16fb5c6a7538f33d07
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
The operator_eqeq(data13) test expected the local-time epoch and UTC
epoch to agree precisely if the localTimeType set by the test's
constructor says local time is UTC; however, when the local zone is
*sometimes* ahead of (or behind) UTC, due to DST, localTimeType is
duly set to indicate that, which doesn't preclude the zone agreeing
with UTC at the epoch. This indeed happens for Europe/London, which
agrees on the epoch but was ahead a few months later. So we can't
determine what outcome to expect based solely on localTimeType,
although we can be sure of a match when local time is UTC. So skip
this test when local time isn't UTC (and document what's going on a
bit better).
Task-number: QTBUG-65435
Change-Id: Id9b8aa0402f2a2b410e0234f6eca4ab0d1010bc4
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove usage of outdated header.LGPL21 and replace those with proper
one (header.LGPL in src, header.GPL-EXCEPT in tests)
Change-Id: Ia4d1c0d84b77f09787fe7c30670747a1fe2aff29
Reviewed-by: Liang Qi <liang.qi@qt.io>
Move the modeltest autotest in the right place, and fix the
other autotests that were using it to use the version now in QtTestLib.
Change-Id: Ic6838945f616d580f357c872ce0956c341be3b16
Reviewed-by: David Faure <david.faure@kdab.com>
When implementing a custom model there's the habit, in each and every
function that takes a QModelIndex, to carefully checking the index
passed by the caller. This index is checked for "legality" (*): does the
index belong to this model, is the index pointing to an existing row and
column, and so on. These checks are hand-rolled and, as such, slightly
different and possibly incomplete (i.e. wrong) every time.
What's worse, these checks are implemented via "ordinary" code (if
statements). However, passing an illegal index to a QAIM function is a
precondition violation, and as such does not (and must not) be
checked in ordinary conditions, as it triggers undefined behavior. On
the other hand, while debugging a custom model or a custom hierarchy
of (proxy) models, having such checks in place can be a significant
aid.
Enter checkIndex(): a debugging helper for QAbstractItemModel and its
subclasses. checkIndex() centralizes the checks for legality of a
given index. User code is free to assert on it, or have some other
fallback mechanism in case a check fails.
(*) Using "legality" here instead of "validity" in order to avoid
confusion between QModelIndex::isValid() and what checkIndex() really
does.
[ChangeLog][QtCore][QAbstractItemModel] Added
QAbstractItemModel::checkIndex(), a debugging function for
QAbstractItemModel subclasses.
Change-Id: I1eea0586b1ac3ededdbfbf46759145022dc5ad86
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Add some macros to enable systematic testing of QStringBuilder
expressions.
Change-Id: I6b7dbcb4a4ca0d1aebdfe7cb9861af881c0cd346
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Remove black-listing of test; the problem was due to misconfigured
time-zone on the CI system - it was on some zone that presently
coincides with UTC, not actually on UTC as supposed.
This reverts commit 597b96b8fa.
Change-Id: I72ad1dfa38532362c05aef33cd874f7f79879a41
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Also adjusted the text segmentation and line break algorithms
so that they can handle the new data, and pass the test suite.
Change-Id: Ib727fd80003e34e96458d7a681996de3fa3691e7
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Make sure we properly handle both directional embeddings as well as
directional isolates to determine the direction of the string.
According to the latest version of the Unicode bidi algorithm,
parts of the string contained inside an directional isolate is
to be ignored when determining the paragraph direction. Embedding
markers themselves are to be ignored as well, but not the characters
inside an explicit directional embedding or override.
This is also some required pre-work to get our BiDi algorithm
updated to the latest version of the standard.
Move the implementation to QStringView and implement the methods
in QString and QStringRef through that implementation.
Task-number: QTBUG-57743
Change-Id: I7f24e09198e22d6359c6534c9ae40a904e94c46e
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This patch updates the code from QSharedMemory to remove the use
of the deprecated QRegExp class. It also updates the unique key
test to avoid change of behavior going undetected.
Change-Id: I649e615027507898800bb5454a62a6cf8bbb2e18
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since its initial implementation, QRingBuffer had the following
fragilities in the architecture:
- it does not guarantee validity of the pointers, if new data will
be appended. As an example, passing an address of the QRingBuffer
chunk as a parameter to the WriteFileEx() function on Windows
requires the stability of the pointer. So, we can't add new data
to the QRingBuffer until the overlapped operation completed
(related issues were fixed for QWindowsPipeWriter and QSerialPort
in 5.6 branch by introducing an intermediate byte array);
- inefficient reallocations in reserve(), if a shared chunk was
inserted in the queue (we can get a reallocation in the place
where we don't expect it:
char *writePtr = buffers.last().data() + tail; <- line #133
).
Proposed solution is to avoid reallocation by allocating a new
block instead. That was accomplished by introducing a QRingChunk
class which operates on a fixed byte array and implements head/tail
pointers strategy for each individual buffer in the queue. So,
QRingBuffer is no longer dependent on QByteArray's internal
shrink/growth algorithms.
Change-Id: I05abab0ad78e22e4815a196037dfc6eff85325d1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This autotest fails on the new Ubuntu 16.04 template with UTC timezone
in the system settings.
Task-number: QTBUG-65435
Change-Id: I397f01ab3fed354a4eeec8b05415226a75fce5a1
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
On Windows, QFileInfo.isWritable() was returning true in situations
where the file would only be writable with elevated privileges. Using
AccessCheck instead of GetEffectiveRightsFromAcl to get the correct
results.
Done-with: Friedemann Kleint <Friedemann.Kleint@qt.io>
Done-with: Edward Welbourne <edward.welbourne@qt.io>
Task-number: QTBUG-30148
Change-Id: I7a3468ac069bf782ca312078e3a84107b6cd468c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
old style connects have protection against null sender and null receiver,
but new style only had against null sender.
Change-Id: Ie555ac078412918e60c3b60830fe1f3abfb7f5af
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Follow-up to d044b0b, with claimed to remove it but
didn’t.
Change-Id: Ifeeb6b062c7c41f1914d677e8aa20e4cb9378ac9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If a signal is emitted more than once in a multithreaded application the
QSignalEventGenerator::execute function asserts in the check for a valid
signal index. It happens after abandoning the state and all the
connections are disconnected. If we have pending signal to be
processed the QObject::sender() won't be able to resolve the sender
object.
Task-number: QTBUG-61463
Change-Id: I9d4b7266c6dddc9ff2e7453b05a6989876ccb332
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Commit 68bcccac took account of MS TZ APIs mis-describing non-DST
zones making changes to standard offset (e.g. Europe/Samara in 2011 at
the end of October); however a DST transition that coincides with an
equal and opposite change to standard offset, while the other end of
its DST period changes normally, ends up looking exactly the same
(although it's nominally subtly different), in MS's APIs. Thus fixing
the more common case broke this more obscure case; there is no way to
fix this (other than not using MS's broken-by-design APIs). So kludge
the test to skip the bit we know this breaks.
Task-number: QTBUG-64985
Change-Id: I068500e2e783ab72b400bfd6dbb7dbbd5b08a7bc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Also drops a few instances where the dependency was purely runtime,
especially for examples.
Change-Id: I2a0476f79928143596bdb3b8f01193af90574ae8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Previously, a 1, 2 or 3 for "dd" would be rejected because 10, 20 or
30 would fit in the field and be valid; but 4 or more was accepted,
even though it was too short for the field, because no suffix could
make it valid within the field-width.
[ChangeLog][QtCore][QDateTime] When parsing dates and times from
strings, fixed-width date-time fields, such as a "dd" for day,
QDateTime now rejects all values that should be padded, rather
than only doing so when the value is a prefix of some value that
would fill the field-width. Use a single letter for the field,
e.g. "d" for day, if you want to accept short
values. (QDateTimeEdit is not affected.)
Task-number: QTBUG-63072
Change-Id: I22d223c50057c3edab4ef7f01d9ed0f58e9139c1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Test-case taken from bug-report; fits in as an easy row in an existing
data-driven test. Add similar tests for date-time and time; and an
isValid test on the end of year 9999. The date-time parser was using
the end of year 7999 as maximum value for dates and date-times; extend
this to year 9999, as I can see no reason not to.
[ChangeLog][QtCore][QDateTime] Years up to 9999 can now be parsed
without error (previously 8000 and beyond were treated as invalid) in
all formats (not only in ISO format). Widgets handling dates now
support dates to 9999, likewise.
Task-number: QTBUG-64401
Change-Id: I518cfa6c2cb4ecc5a85b896dc9e56b4fdd8a8bb1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When a new source model was set to QSortFilterProxyModel, the model
tried to remap the persistent indexes to the new model which was wrong.
The correct solution is to clear the persistent indexes with
_q_sourceModelDestroyed() since the old source model went away.
Task-number: QTBUG-44962
Change-Id: Id39e9ac83324250e8bfa434aae467a9206d2590e
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
The previous commit didn't handle correctly the case where an entire
mime directory is deleted. The unittest wasn't testing that case,
now it is. We need to move providers into a new list, and then
delete those left over (i.e. now unused).
Change-Id: I04fd8b39b511a2331d706864f695ce5074acf916
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously, we would use mime.cache in all mime directories if at
least one of them had such a file (other than the most-local one),
otherwise the "source" XML would be used in all directories.
Now it's possible to use mime.cache in those directories which
have one, and XML in those directories that don't.
Not only is this more correct, it will allow in a subsequent
commit to bundle the binary cache in QtCore's qrc rather than
the very big XML file.
The design change to allow this is that now every provider
only deals with a single directory, and QMimeDatabasePrivate
takes care of creating multiple providers, one for each dir.
This required to move most of the loops from the binary provider
up to QMimeDatabasePrivate itself.
Change-Id: Iac82d5f5836b80d45076e586b903d16fa2525b34
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since removeAll() takes its argument by cref, if passing a reference
to an element of the container to removeAll(), the element may be
deleted (overwritten) by anyother value, leading to UB.
Add a test that actually happens to fail for me without the patch,
even though that might not be guaranteed (we may invoke UB).
Change-Id: If8c795113aeb515f4a9bdf1e072395b932295667
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
During the container BoF session at the Qt Contributor Summit 2017 the
name of the signed size type became a subject of discussion in the
context of readability of code using this type and the intention of
using it for all length, size and count properties throughout the entire
framework in future versions of Qt.
This change proposes qsizetype as new name for qssize_t to emphasize the
readability of code over POSIX compatibility, the former being
potentially more relevant than the latter to the majority of users of
Qt.
Change-Id: Idb99cb4a8782703c054fa463a9e5af23a918e7f3
Reviewed-by: Samuel Gaist <samuel.gaist@edeltech.ch>
Reviewed-by: David Faure <david.faure@kdab.com>
Allows categorized logging before QCoreApplication has been created,
which otherwise would silently fail to output anything because the
category would never be enabled, despite QT_LOGGING_RULES being set.
Change-Id: I1861e5366ea980dff2ffa753b137276c77278eee
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The test is removing 2 rows starting at the last row of a model.
As the comment indicates, that's clearly invalid.
Change-Id: I43ef00d602934965b206e2ba591ff8fd0a6ae398
Reviewed-by: David Faure <david.faure@kdab.com>
Unary ~ is not defined for enum classes, so we need a cast.
Change-Id: I79d495ebcc24ab960da8dae3be08eb307a9de448
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The assertion in isUnnamedFile() we had was incorrect after the file was
removed, since we cleared the name and possibly reset back to the
template. Since ~QTemporaryFile() calls remove(), this was easy to
trigger if you attempted to remove the temp file and leave
QTemporaryFile like that.
Take this opportunity to add to the docs of setAutoRemove() explaining
the possibility of unnamed files.
#7 0x00007f69bcc2b50e in qt_assert (
assertion=assertion@entry=0x7f69bcf194a0 "unnamedFile == d_func()->fileEntry.isEmpty()",
file=file@entry=0x7f69bcf19458 "io/qtemporaryfile.cpp",
line=line@entry=514) at global/qglobal.cpp:3123
#8 0x00007f69bcd672cf in QTemporaryFileEngine::isUnnamedFile (this=this@entry=0x55cd60644df0)
at io/qtemporaryfile.cpp:514
#9 0x00007f69bcd683f7 in QTemporaryFileEngine::remove (this=0x55cd60644df0)
at io/qtemporaryfile.cpp:396
#10 0x00007f69bcd48654 in QFile::remove (this=this@entry=0x7fffb393f7e0)
at io/qfile.cpp:513
#11 0x00007f69bcd6653b in QTemporaryFile::~QTemporaryFile (this=0x7fffb393f7e0, __in_chrg=<optimized out>)
at io/qtemporaryfile.cpp:719
Change-Id: I57a1bd6e0c194530b732fffd14f4ed28ca8185b2
Reviewed-by: Andreas Hartmetz <ahartmetz@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Both ARM and x86 can convert fp16 much faster in bulk than one at a
time. This also enables hardware accelerated conversion on x86, when
F16C isn't unconditionally available at compile time.
This code is implemented in C to ensure that there's no leakage of
inline symbols from the .obj file that was compiled by Visual Studio
with AVX support. Unfortunately, simd.prf uses $(CXX) instead of $(CC)
for all its sources, which means the file gets interpreted as C++ by
g++, clang++ and icpc. Those compilers at least don't leak any symbols.
Done-with: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I9d26d99e83392861fb09564e0e8e8d76cd8483b3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Tested with Clang, GCC 4.5 & up, ICC 17 and MSVC 2017. No current
version of MSVC supports C11 and GCC implemented the features slightly
later in C than in C++.
Change-Id: I57a1bd6e0c194530b732fffd14f45c5074c9a052
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This test makes sure that we do not introduce a regression where the
threads exited the inner loop over the queue before the queue was
empty. This was triggered by calling tryTake at least maxThreadCount
times, which left the same number of null pointers in the queue
and caused the inner loop to exit too soon for all the threads.
Change-Id: I3a9d800149b88d09510ddc424667670b60f06a33
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When parsing a date-time's zone, a stray Z denotes UTC (a.k.a. Zulu
time), despite not being a valid name for the zone. Clients parsing
such date strings had to treat the Z as a literal, rather than a
zone-ID, but then they got back a LocalTime instead of the UTC the
string actually described. So teach QTimeZoneParser to handle this
special case and adapt an existing test (that used a time ending in Z,
but had to treat it as a local time) to check this works.
[ChangeLog][QtCore][QDateTime] When parsing a time-zone, "Z" is now
recognized as an alias for UTC.
Change-Id: Ib6aa2d8ea2dc6b2da526b39aec74dbc007f90fd8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This allows us to make sure that the PID we read is from the same boot
as we are right now running. The collision could happen on embedded
systems where the boot sequence is fixed, so all the same processes
would have the exact same PIDs after reboot as they did before.
[ChangeLog][QtCore][QLockFile] QLockFile can now properly conclude that
a lock file from a previous boot of the same device is stale and can be
removed. This is implemented only for Linux and Apple operating systems.
Task-number: QTBUG-63425
Change-Id: I0b48fc8e90304e0dacc3fffd14e8e3a197211788
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
The issue was introduced by eaee1209f0, so
it affected only 5.9.2.
[ChangeLog][QtCore][QSemaphore] Fixed a regression that would make
tryAcquire() not to wait forever if the timeout was a negative
value. Note: new code is advised to only use -1 to indicate "forever",
as some other functions taking timeout periods do not accept other
values.
Task-number: QTBUG-64413
Change-Id: I57a1bd6e0c194530b732fffd14f58fce60d5dfc9
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This brings us to almost parity with the C++11 Random Engine API
requirements (see chapter 26.5.1.4 [rand.req.eng]). We don't implement
the templated Sseq requirements because it would require moving the
implementation details to the public API. And we don't implement the
<iostreams> code because we don't want to.
Change-Id: Icaa86fc7b54d4b368c0efffd14f05ff813ebd759
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Since we don't document how many bytes one needs (it's 2496), it's
difficult for the caller to provide just enough data in the seed
sequence. Moreover, since std::mt19937 doesn't make it easy to provide
the ideal size either, we can't actually write code that operates
optimally given a quint32 range either -- we only provide it via
std::seed_seq, which is inefficient.
However, we can do it internally by passing QRandomGenerator to the
std::mersenne_twister_engine constructor, as it's designed to work.
Change-Id: Icaa86fc7b54d4b368c0efffd14f0613c10998321
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Now only QRandomGenerator::system() will access the system-wide RNG,
which we document to be cryptographically-safe and possibly backed by a
true HWRNG. Everything else just wraps a Mersenne Twister.
Change-Id: I0a103569c81b4711a649fffd14ec8cd3469425df
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Since we're adding a deterministic generator that inherently does not
use syscalls, and people should really use that one by default, there is
no point in optimizing the secure generator wrt syscalls. Besides,
keeping the random data in memory for longer than needed is likely
inadviseable.
Change-Id: Ib17dde1a1dbb49a7bba8fffd14ed0871117fe930
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
To obtain "proper" directory behavior, we have to check against the
extracted "resources" directory instead of its qrc counterpart.
Change-Id: I4996ba74419945f78d356ad953a5b826ff663687
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
To obtain the file's handle, we need to obtain it from the extracted
test data instead of qrc.
Change-Id: I89c5c3f3a7da7e36205a439581a6d83efffdc07c
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Resource files are extracted to m_dataDir in tst_QFile::initTestCase.
Instead of trying to access the file from the resource on systems that
use qrc for bundling the test data, we have to use the files that were
extracted at the beginning of the test.
Change-Id: I35453fbdeb27e317d1342ff1cb7bbea9cebea14d
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
On some platforms (like UWP) files that are copied during
qfile auto tests are not writable by default. The cleanup will fail for
these files if the permissions are not set accordingly.
Change-Id: Id925dcadfc6b505c87f1f55d5ea05e286b60a5a5
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The vast majority is actually switched to QRandomGenerator::bounded(),
which gives a mostly uniform distribution over the [0, bound)
range. There are very few floating point cases left, as many of those
that did use floating point did not need to, after all. (I did leave
some that were too ugly for me to understand)
This commit also found a couple of calls to rand() instead of qrand().
This commit does not include changes to SSL code that continues to use
qrand() (job for someone else):
src/network/ssl/qsslkey_qt.cpp
src/network/ssl/qsslsocket_mac.cpp
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5285d43f4afbf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The milli-seconds since epoch value for an invalid transition is,
of course, invalidMSecs(), not invalidSeconds().
Added a comment while I was at it, explaining why we expect a
transition before the epoch, if such transitions are supported.
Change-Id: I0f376f9d69c0e6e79a309dc011943baa41175135
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ultrix and reliant have not seen a release since 1995. dgux not since
2001. bsdi not since 2003. irix not since 2006. osf not since 2010.
dynix... unclear, but no later than 2002. symbian needs no mention.
All considered obsolete, all gone.
sco and unixware are effectively obsolete. Remove them until someone
expresses a real need.
Change-Id: Ia3d9d370016adce9213ae5ad0ef965ef8de2a3ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... by moving them in QTestPrivate namespace (qtesthelpers_p.h). This
header file is a convenient staging area for helper APIs, eventually
some could be moved to public QTest API.
This header file utilizes the same pattern as other qtestlib header
files - wrapping functions with QT_${LIBNAME}_LIB to automatically
enable certain APIs based on what is in the projects dependencies,
e.g. QT += widgets.
Change-Id: Ic0266429939c1f3788912ad8b84fc6e0d5edd68b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Discussed during Qt Contributor Summit 2017. We concluded that we don't
want to make these functions public, as they do not follow Qt coding
style API. Specifically,
qStartsWith(a, b)
is not easily understood which argument is the needle and which argument
is the haystack (same problem memcpy() has). Compare that to
a.startsWith(b)
which can clearly be read in English as a subject-verb-object sentence.
This commit removes the unit tests that called compare().
Discussed-on: http://lists.qt-project.org/pipermail/development/2017-October/031060.html
Change-Id: Icaa86fc7b54d4b368c0efffd14ee6205eb9043fb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Right now,this does really nothing. This commit is just to allow us to
transition the other modules (besides qtbase) to use the syntax that
will become the API.
I've marked three places to use the system CSPRNG:
1) the QHash seed
2) QUuid
3) QAuthenticator
I didn't think the HTTP multipart boundary needed to be
cryptographically safe, so I changed that one to the global generator.
Change-Id: Ib17dde1a1dbb49a7bba8fffd14ecf1938bd8ff61
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Open failures due to sharing violations have been observed in Coin.
Change-Id: If7fbe01a454b3c343c0b87f73db50c28eae901c3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Guard the FILE * obtained by fopen() by a RAI class ensuring
the file is closed on destruction.
Change-Id: I9297f91ca2120238f3a44bad92bca5f920e01aa8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
There were a couple of corner cases where doing setPort() would result
in QUrl thinking that an authority was not present. Since the full URL
parsing implies that a host is always present if the authority is
present, then we also imply that setting the port number makes the host
be present too.
Change-Id: I69f37f9304f24709a823fffd14e67c12da18d69f
Reviewed-by: David Faure <david.faure@kdab.com>
The previous version was good, just not optimal. Because the input was
an unsigned 64-bit number, compilers needed to generate extra code to
deal with HW instructions that only convert 64-bit signed input. And
that was useless because a double uniformly distributed from 0 to 1 can
only have 53 bits of randomness.
The previous implementation did exactly what the Microsoft libstdc++ and
libc++ implementations do. In my opinion, those implementations have an
imperfect distribution, which is corrected in this commit. In those, all
random input bigger than 0x20000000000000 has a different frequency
compared to input below that mark. For example, both 0x20000000000000
and 0x20000000000001 produce the same result (4.8828125e-4).
What's more, for the libc++ and MSVC implementations, input between
0xfffffffffffff001 and 0xffffffffffffffff results in 1.0 (probability 1
in 2⁵³), even though the Standard is very clear that the result should
be strictly less than 1. GCC 7's libstdc++ doesn't have this issue,
whereas the versions before would enter an infinite loop.
Change-Id: Ib17dde1a1dbb49a7bba8fffd14eced3c375dd2ec
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Error out if it's missing or broken (Mersenne Twister not present).
This ensures that we never have a low-quality random generator in Qt.
Change-Id: I0a103569c81b4711a649fffd14ec80649df7087e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Auto-reset events are automatically reset to non-signaled when we get
notified about the signaled state. This implies that we cannot check the
event state again in activateEventNotifiers. Instead, store the signaled
state in a QAtomicInt and test and decrement that.
This amends commit 85403d0a.
Task-number: QTBUG-63555
Change-Id: I0adee3d2929783f98d91060f9106c8b5266d72fa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We're not going to crash to avoid core dumps getting recorded by
systemd, filling up filesystems or showing dialog boxes. We just need to
exit without running destructors. Now, exit() isn't supposed to run
function-scope destructors, so just in case we use _exit().
Change-Id: I0b48fc8e90304e0dacc3fffd14e909ff248ce1a1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
<future> is needed by QThread::create. Instead of a fragile series
of preprocessor tests, move its detection to a configure test.
This dramatically simplifies the code, but on the other hand ties
the availability of QThread::create() to the system used to compile
Qt (rather the one used to compile an application).
Change-Id: If1b06363379bf29126cfa68f2a0651cbb78a67f7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commits aba336c2b4 (in Qt 5.2) and
aba336c2b4 (in 5.6) both tried to deal
with this problem, with different levels of success. This is the third
attempt (and hopefully the charm).
Instead of modifying the path that the user provides, go straight ahead
and declare it invalid. This is supported by RFC 3986, which declares
this expansion impossible:
relative-part = "//" authority path-abempty
/ path-absolute
/ path-noscheme
/ path-empty
path-abempty = *( "/" segment )
path-absolute = "/" [ segment-nz *( "/" segment ) ]
path-noscheme = segment-nz-nc *( "/" segment )
The "path-abempty" and "path-noscheme" cases are the two issues we
already handle. This commit adds the third one: path-absolute, which
requires that the first segment of the path be of non-zero length.
That is, it is now possible again to have http://example.com//path
constructed piece-wise, without it producing http://example.com/path.
Additionally, it catches the case of http://example.com//path parsed
from full URL then followed by setAuthority("").
Change-Id: I69f37f9304f24709a823fffd14e67a5e7212ddcd
Reviewed-by: David Faure <david.faure@kdab.com>
The qWaitFor functions themselves can not trigger a test failure, as that
will not result in the test function exiting early, so every single call
to qWaitFor needs to be wrapped in a QVERIFY.
Change-Id: Id15a1549f31d06cdbf788e1d84ea431c28636ec8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When many runnables are executed, this improves the
performance by not resizing the queue for each runnable,
which was the case in the previous version, because of
many calls to QVector::takeFirst().
Also add a test that makes sure tryTake() is safe to
call and does not leave the queue in a bad state that
tries to use nullptr entries.
Change-Id: I608134ecfa9cfc03db4878dcbd6f9c1107e13e90
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Convert QSysInfo/QOperatingSystemVersion to __builtin_available where
required or possible, or to QOperatingSystemVersion where
__builtin_available cannot be used and is not needed (such as negated
conditions, which are not supported by that construct).
Change-Id: I83c0e7e777605b99ff4d24598bfcccf22126fdda
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This avoids looping prior to the main 16-byte loop, by performing one
load that may include bytes prior to the start of the string. This is
guaranteed not to fault, since str points to a valid character, but it
may cause Valgrind to print warnings.
Change-Id: I6e9274c1e7444ad48c81fffd14dcae854bba24b2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
"generate" is better than "get", and we already have "generate(it, it)"
which uses std::generate(). This changes:
- get32() → generate()
- get64() → generate64() and QRandomGenerator64::generate()
- getReal() → generateDouble()
Change-Id: I6e1fe42ae4b742a7b811fffd14e5d7bd69abcdb3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
For self-consistency with QSharedPointer and minor consistency
with std::unique_ptr (although QScopedPointer isn't movable, so we
can't claim STL compatibility with it).
[ChangeLog][QtCore][QScopedPointer] Added get().
Change-Id: Ib58f936afa0e0d5bce57a61d1467b69956f37ceb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In data(), index belongs to the proxy, not to the source. It needs
to be mapped back to it first.
Change-Id: Ie5dcbf13166dadf62f3d85b594d3227383132521
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
One example is VxWorks.
Change-Id: I253df715a9417c1f9cede79b1e1860924e0da8a9
Reviewed-by: Tuomas Heimonen <tuomas.heimonen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Performance is more important in this case than the theoretical benefit
of constexpr. This commit implements the SSE2 search for 16-bit null and
it might be possible to implement the equivalent for AArch64
(investigation required). It also adds a fallback to wcslen() for
systems where wchar_t is short (non-x86 Windows or 32-bit x86 build with
-no-sse2).
We can re-add the constexpr loop once the C++ language has a way of
overloading constexpr and non-constexpr. GCC has a non-standard way to
do that with __builtin_constant_p, which is also implemented in this
commit, but note that the inline function is still not constexpr.
Change-Id: I6e9274c1e7444ad48c81fffd14dcaacafda5ebdc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some valid UTF-16 characters cannot be expressed in XML 1.0 and a
QString may contain invalid unicode. In both cases we should not write
the respective data to the output stream, as that generates invalid XML,
which then cannot be read back by QXmlStreamReader. In addition we
should report an error if we encounter them.
The change filters the incorrect strings from the output and introduces
an "encodingError" flag which is reported from hasError().
[ChangeLog][Important Behavior Changes] Characters invalid in XML, such
as 0x0 or 0xfffe, as well as strings containing unmatched UTF-16
surrogates are now suppressed from the output of QXmlStreamWriter and
cause the error flag to be set.
Task-number: QTBUG-63150
Change-Id: Ia29bab768fed9681dd68e8934da2a7e3fcdfc3cd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QMacAutoReleasePool is backed by an NSAutoreleasePool, which documents that
"you should always drain an autorelease pool in the same context (invocation
of a method or function, or body of a loop) that it was created".
This means allocating QMacAutoReleasePool on the heap is not a supported
use-case, but unfortunately we can't detect it on construction time.
Instead we detect whether or not the associated NSAutoreleasePool has been
drained, and prevent a double-drain of the pool.
Change-Id: Ifd7380a06152e9e742d2e199476ed3adab326d9c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
