Unlike client, this needs a bit more changes:
- remove redundant (and outdated) stdlib.h includes
- use QRandomGenerator (instead of qsrand/qrand pair)
- replace QStringList with QVector<QString>
- Q_NULLPTR->nullptr, ExplicitType * -> auto
- fix some weird indentation
Task-number: QTBUG-60628
Change-Id: I12eed12711b1e622407bd8ecd1afdf56a2cf2097
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
For HTTP/1 it's done when no data expected and response headers received -
protocol handler emits channel->allDone which handles the status code and
sets (if needed) a redirectUrl. HTTP/2 protocol handler cannot emit allDone
(it has many requests multiplexed and actually cannot say allDone yet).
So we set a redirect url if we have the corresponding status code and
found 'location' header. Before it's too late.
Task-number: QTBUG-63471
Change-Id: Icfa871fb999e676650d62c45a20e689596da4028
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Otherwise QWindow::setFilePath() before create() would have no effect.
Change-Id: Ia2171054aa13e21316d525193d330efaf4653dbf
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Copy into the intended array elements, not into the start of the
array.
Change-Id: I05c4ece2450583c9358aa1eddfd702262e995146
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Most linux distribution uses libjpeg-turbo as a replacement for libjpeg.
Since Qt will be linked against -turbo more frequently than the "original"
libjpeg we should use it for the bundled copy, too.
Also add an import script.
[ChangeLog][Third-Party Code] Replaced bundled libjpeg by libjpeg-turbo 1.5.2
Change-Id: I41081db74f194cbc288820fc783c9fef16545efd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
... as soon as we updated multicastsender. Changes are minimal and mostly
cosmetic - use 'explcit' and 'nullptr' where appropriate, make a socket
data-member and not a pointer, move the 'datagram's declaration outside
of a loop.
Task-number: QTBUG-60628
Change-Id: Icfa46e6d2844c40a605f2f4066847594943a8ea8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Problem was for 32 bit macOS, or if QT_COORD_TYPE was configured
to be float.
Change-Id: I0a3d3d305f2e8a0f9be7c40f4fef7eabf4643d05
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This is mostly relevant for Apple platforms, where we can use the new
unguarded availability warnings to guarantee that proper version checks
are present when using APIs that are not necessarily available on the
deployment target.
Change-Id: Ie408704b2924e1220491a9ea30f0141dfa4867d9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... as soon as we updated the 'sender' example. Changes are purely cosmetic
though - 'explicit', nullptrs and local variables instead of redundant
data-members (QPushButton).
Task-number: QTBUG-60628
Change-Id: I572219da9d2a0ced07d94efb6f52f00b5a9c546d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
GCC 7 and other compilers compile this code just fine. GCC 6 fails, so
this is clearly a compiler bug. So revert the implementation of the
qWait() function back to the original, to make the problem disappear.
qtestsystem.h:58:42: error: ‘bool QTest::qWaitFor(Functor, int) [with Functor = bool (*)()]’ used but never defined [-Werror]
Change-Id: I0b48fc8e90304e0dacc3fffd14e8110138cc9f45
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
If you're using GCC 7 or Clang 4, Q_REQUIRED_RESULT expands to
[[nodiscard]] that must appear in as specific place on the line.
qcompilerdetection.h:1182:29: error: attribute ignored [-Werror=attributes]
qtestsystem.h:58:12: note: in expansion of macro ‘Q_REQUIRED_RESULT’
static Q_REQUIRED_RESULT bool qWaitFor(Functor predicate, int timeout = 5000)
^~~~~~~~~~~~~~~~~
Change-Id: I0b48fc8e90304e0dacc3fffd14e80ede168d5c6b
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This avoids looping prior to the main 16-byte loop, by performing one
load that may include bytes prior to the start of the string. This is
guaranteed not to fault, since str points to a valid character, but it
may cause Valgrind to print warnings.
Change-Id: I6e9274c1e7444ad48c81fffd14dcae854bba24b2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Child QWindows (or in the case of QWindows embedded in native applications:
top level QWindows where the corresponding NSView is a child of another
view, so not being the contentView of its window), still need some of the
NSWindow notifications to e.g. update their exposed state when the window
becomes visible.
We make sure to send the notification to all QCococaWindow children of
the relevant NSWindow, and let each callback decide if it should only
apply to content views.
This fixes an issue where a QWindow would never be exposed if the window
was a child NSView and added to a NSWindow that was yet to be shown.
Change-Id: I7f7df8bc5f4ca3ac553a2c146f8c3229b197c059
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Otherwise the deletion of the platform window may result in platform events
that then conclude the QWindow has a valid platform window and calls into
it, when it's been half-way destroyed.
Change-Id: If9eaad1b4e6aa414ba0f96475756a2146e0c01d5
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
From: https://tronche.com/gui/x/xlib/events/exposure/expose.html
"The circumstances in which the X server generates Expose events
are not as definite as those for other events."
On windows with XCB_GRAVITY_NORTH_WEST flag set we should not get
expose events according to e2665600c0,
but as stated earlier this might not always be true.
Nevertheless, sometimes we get expose event from X server when shrinking
window, but most of the time we don't. Make the test not flakey by
checking that we get at least 1 expose event, instead of exactly 1.
Now running test 500 times in a loop does not fail.
Task-number: QTBUG-63424
Change-Id: I8004e622020cc09e11b7d592faf6d9ee1b9cfee2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QGuiApplicationPrivate::processExposeEvent updates the QWindow's exposed
state, so we need to call QWindowSystemInterface::handleExposeEvent()
when going from non-exposed to exposed.
Change-Id: I461b2fb27cd8fd4bdb250d05d47f9af6cb3eb15c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Similar to broadcast sender:
- where possible use local variables instead of data-members
- where possible avoid heap-allocated objects, use sub-objects instead
- change signal-slot connection syntax (and as a "bonus" - show our QOverload)
Task-number: QTBUG-60628
Change-Id: I8cd4f888c1d0653bdc8591800e713bbd347ad2fb
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This patch contains:
- some cosmetic changes to make example look more like
modern C++;
- UI initialization code and SSL signals handling were split
into separate member-functions;
- useless checks 'if (socket)' were deleted;
- widget's minimum size is now fixed + font size
in 'CertInfo' dialog increased to make it readable.
Change-Id: I7aadb78896832a989494d280d6da0635045f948c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The QML API allowed only separate setting of geometry parameters which
causes flickering when all parameters need to be changed.
By exposing the setGeometry function it is possible to set all of these
at once using an imperative setGeometry call from JavaScript.
Note that bindings for x/y/width/height are still evaluated
sequentially, resulting in four calls to the platform window's
setGeometry. This patch only introduces an imperative workaround for
that issue.
Change-Id: Ie9b0d3c39434740e50757ba7cff0385ae80f47f4
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reduces duplication of logic and allows other primitives to be
built on top.
Change-Id: Ia100014cfb0c09ac2f47c3a156d0c76f0fddafa8
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
When tabbing/searching for the next focus widget, the current
code would check if the next widget in the focus chain
had a focus proxy, and if so, ignore it. The exact reason
for this behavior is not clearly understood, but some widgets
(e.g QSpinBox) has children (a QLineEdit) that sets the parent
as focus proxy. If we didn't ignore children with focus proxy, tabbing
from a QSpinBox would lead us to find the inner QLineEdit, which
(because of its proxy), would lead us back to the QSpinBox. And
therefore not be able to tab out.
But ignoring the focus proxy has other problems. Normally a focus
proxy is the next sibling to the widget it acts as a proxy for, and
tabbing to the widget will therefore appear correct. But if the
focus proxy is not the next sibling, the logic will fail, since
the tab would anyway give focus to the next sibling. This becomes very
apparent if the focus proxy is a child of the widget, since then
its likely that the focus proxy is not the _first_ child among all
the children. So tabbing to the parent would not give focus to
the proxy.
This patch will change this logic so that you are allowed to tab to a
widget with a focus proxy. But we check that if you do so, you actually
end up moving focus in the right direction. If not, we ignore it like
before. This will ensure that we tab correctly when dealing with focus
proxies, and especially when focus proxies are used to construct
compound widgets.
[ChangeLog][Widgets] When tabbing to a widget with focus proxy, focus
will now be given to the proxy rather than just being ignored.
Task-number: QTBUG-10907
Change-Id: I66d1da5c941fdd984bb2783cc355ca65b553b5dd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Factor out searching for the deepest focus proxy
in to a private function. Other than being called
from QWidget::setFocus(), this function will also be
used in subsequent patches.
Change-Id: I4450a42e362eccb64f8a88c7ea83b415101973b9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
QHostAddressPrivate is one QString and 24 bytes, allocated on the heap,
which is WAY too heavy for something that fits into 8 bits. So instead
of storing the expanded netmask inside QNetworkAddressEntryPrivate, we
store the simple prefix length and calculate the mask only if asked.
Change-Id: Ie05c6480d8a44fda817ffffd14d9ad4707aa8a92
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When I introduced QNetworkInterface in Qt 4.2, I didn't understand the
relationship between the prefix list and the unicast address list in the
IP_ADAPTERS_ADDRESSES structure. Turns out, there isn't a (direct) one
and the actual solution didn't come along until Windows Vista, adding
the prefix length to each address.
Change-Id: I6a556cca551116d77c7edf43f9c651dacb75348f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Commit 2589111dc0 removed the dynamic
function search, but did not remove the offsetof checks.
Change-Id: Ibd2b5263f7de551f47fe137dbe1a1b7b7cd71934
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Our iOS deployment target is now 8, so this code will never be executed.
Change-Id: I7dd4001c01d7c8c2e8e977753cb3fa246b19ce06
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
This allows us to retrieve the current OS type without constructing an
instance of the class, and it's also constexpr.
Change-Id: I8b32a1aebeb8139fe3fcf146e5de558fa1060bb8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Now that we accept STL datatypes in our ABI, expose a factory
function that takes a std::future<void>, and hide the QThread
subclass in our implementation. This also solves the problem
of a non-exported polymorphic class that would generate duplicate
vtables / typeinfo in all TUs.
Change-Id: I70a5c301e7c589de1a4a189db39b86b956d1ba0d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
"generate" is better than "get", and we already have "generate(it, it)"
which uses std::generate(). This changes:
- get32() → generate()
- get64() → generate64() and QRandomGenerator64::generate()
- getReal() → generateDouble()
Change-Id: I6e1fe42ae4b742a7b811fffd14e5d7bd69abcdb3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It was an oversight in 83729ad7a1
that this constructor is still in use in other modules. And in fact
we cannot remove public constructors without deprecating them first.
Task-number: QTBUG-63355
Change-Id: I64dbf9bc54c0bf6be7157f047b548d3b2c5bc2ed
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It was already revamped a fair bit 2 years ago
Replaced Q_NULLPTR with nullptr.
Added a minimum size to the progressbar dialog.
Update the label if a redirect is rejected.
Improve the overwrite dialog message.
Replaced the documentation image.
Task-number: QTBUG-60628
Change-Id: I0fb70d90e1d6ca84a8307bd6ea4ea1ce220feeaf
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Fix copyrights, update signal-slot connection syntax, use some simple
C++11 features (member-initializers, 'auto'), delete some data-members
(where a local variable is enough), where possible - use data-memebrs
as sub-objects (instead of heap allocated).
Task-number: QTBUG-60628
Change-Id: Ia440d8471eafb47481c0d010175c907037bae841
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Previously we pretended that there is only one touch device; but in fact,
different trackpads have different deviceIDs, and this may be useful
in some scenarios to tell them apart, as on other platforms.
So far we don't expect to get touch events from actual touchscreens
though, because macOS only turns single-touch events into mouse events
and does not interpret gestures on touchscreens. So there isn't API
which can distinguish touchscreens from touchpads as far as we know.
QCocoaTouch::getTouchDevice() takes the type as a parameter, just in
case this changes some day.
Change-Id: I56228471363235c5d0cc2a55a35a3c3288f3b1a1
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
QtQuick is beginning to have a use for this, to distinguish native
gestures which come from actual trackpad rather than from the "core pointer".
It might as well use a real device ID instead of making one up,
as it has to do for the core pointer.
So far on macOS, the device ID isn't a real one; but that can be fixed,
as the qCDebug lines demonstrate (different trackpads have different IDs).
Change-Id: I5841deb1c4cc0b77a3b1df70904f70b3d2d71853
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
The libraries are now 'libssl-1_1' and 'libcrypto-1_1', not 'ssleay32' or
'libeay32'. 64-bit versions also have -x64 suffix in their names.
Task-number: QTBUG-62692
Change-Id: Ic15bf8f8271d0f6266cb9d2143e292ddba643ded
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Introduce nullptr and override. Change the ready/valid columns to
use check marks. Right-align the numerical columns. Add a shortcut
to refresh. Sort by path, making sure the root volume is first.
Task-number: QTBUG-60635
Change-Id: I74cda7647f544902aaf4d2a0ab76986f1523aa6f
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
This autotest is blacklisted as it is deemed flaky.
Task-number: QTBUG-63260
Change-Id: I3e83bcb0dbbe4fbf9d5c16f764fbeeca2b52d10c
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
