This is used by uClibc, at least.
[ChangeLog][QtCore][QTimeZone] The TZDB back-end now recognizes the
contents of /etc/TZ as a fall-back for $TZ (as used by uClibc).
Fixes: QTBUG-75565
Change-Id: I3067e2d023cf30a85633575b5d7dc0ee3ec36927
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The TZ environment variable can validly contain a POSIX rule, rather
than an IANA ID, as described here:
http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap08.html#tag_08_03
However, if TZ were set to such a value, leading to it being used as
systemTimeZoneId(), it would be passed to QTzTimeZonePrivate::init(),
which is a no-op unless it manages to open a zoneinfo/ file with the
given ianaId as name. When the environment variable doesn't name a
zoneinfo/ file, we would thus get an invalid time-zone. We can,
instead, check whether the ianaId looks like a valid POSIX rule and,
if it does, use it as m_posixRule, enabling us to correctly handle
this case.
Tweak parsing of POSIX rules so that a zone using name "UTC" or "GMT"
with an offset other than 0 will be rejected as invalid. This avoids
parsing a zone name such as "GMT+17" or "UTC+00:01" as a POSIX rule,
where it should be understood as an offset from UTC (and only certain
well-established offsets are supported).
Added two test-cases to tst_QTimeZone::tzTest() for validity of a
POSIX zone value - a simple one constructed during discussion of the
bug, the other taken from an example in:
http://leaf.sourceforge.net/doc/buci-tz3.html
Task-number: QTBUG-75565
Change-Id: Ia5cb1cc56b13b0f6b56258e48be98d04d909e32a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Using the information from grafana we can unblacklist all the things
which are consistently passing.
Change-Id: I79917ca9c40e1df2dab46bb54cc0a2bd4a1a4621
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Using the information from grafana we can unblacklist all the things
which are consistently passing.
Change-Id: I3676d9cb5f9167039c3d1963521fa85785210f7c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Using the information from grafana we can unblacklist all the things
which are consistently passing.
Change-Id: If04963cd5f9a53ee2293d596f9111ebcb1add532
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Also undo changes in setNetworkAccessible and setConfiguration
since they introduced a change in behavior, which results
in auto-test failing.
Change-Id: I5d74c47338bff8f964ba2e27256902c79303e00f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Clang generates a 'constant-logical-operand' warning when it finds
a non-boolean constant in a logical operation. Just make
the enum's base type as bool here to suppress the warning.
Change-Id: Ie53f53fa54f57535f89598bdabc4d893f6a1cc32
Fixes: QTBUG-75737
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Can now detect nested quotes and code blocks inside quotes, and can
rewrite the markdown too.
QTextHtmlParser sets hard-coded left and right margins, so we need to do
the same to be able to read HTML and write markdown, or vice-versa,
and to ensure that all views (QTextEdit, QTextBrowser, QML Text etc.)
will render it with margins. But now we add a semantic memory too:
BlockQuoteLevel is similar to HeadingLevel, which was added in
310daae539 to preserve H1..H6 heading
levels, because detecting it via font size didn't make sense in
QTextMarkdownWriter. Likewise detecting quote level by its margins
didn't make sense; markdown supports nesting quotes; and indenting
nested quotes via 40 pixels may be a bit too much, so we should consider
it subject to change (and perhaps be able to change it via CSS later on).
Since we're adding BlockQuoteLevel and depending on it in QTextMarkdownWriter,
it's necessary to set it in QTextHtmlParser to enable HTML->markdown
conversion. (But so far, nested blockquotes in HTML are not supported.)
Quotes (and nested quotes) can contain indented code blocks, but it seems
the reverse is not true (according to https://spec.commonmark.org/0.29/#example-201 )
Quotes can contain fenced code blocks.
Quotes can contain lists. Nested lists can be interrupted with
nested code blocks and nested quotes.
So far the writer assumes all code blocks are the indented type.
It will be necessary to add another attribute to remember whether the
code block is indented or fenced (assuming that's necessary).
Fenced code blocks would work better for writing inside block quotes
and list items because the fence is less ambiguous than the indent.
Postponing cursor->insertBlock() as long as possible helps with nesting.
cursor->insertBlock() needs to be done "just in time" before inserting
text that will go in the block. The block and char formats aren't
necessarily known until that time. When a nested block (such as a
nested quote) ends, the context reverts to the previous block format,
which then needs to be re-determined and set before we insert text
into the outer block; but if no text will be inserted, no new block
is necessary. But we can't use QTextBlockFormat itself as storage,
because for some reason bullets become very "sticky" and it becomes
impossible to have plain continuation paragraphs inside list items:
they all get bullets. Somehow QTextBlockFormat remembers, if we copy it.
But we can create a new one each time and it's OK.
Change-Id: Icd0529eb90d2b6a3cb57f0104bf78a7be81ede52
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
- QObjects are always passed by pointer not by reference, by convention
- writeTable() takes QAIM rather than QATM to make testing via
QStandardItemModel possible in the future
Change-Id: I5bc6b8cd9709da4fb5d57d98fa22e0cb34360944
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Importer fixes:
- the first list item after a heading doesn't keep the heading font
- the first text fragment after a bullet is the bullet text, not a
separate paragraph
- detect continuation lines and append to the list item text
- detect continuation paragraphs and indent them properly
- indent nested list items properly
- add a test for QTextMarkdownImporter
Writer fixes:
- after bullet items, continuation lines and paragraphs are indented
- indentation of continuations isn't affected by checkboxes
- add extra newlines between list items in "loose" lists
- avoid writing triple newlines
- enhance the test for QTextMarkdownWriter
Change-Id: Ib1dda514832f6dc0cdad177aa9a423a7038ac8c6
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
It's a private header; but to be able to use it in a test, it has to
be as clean as a public header.
Change-Id: I868372406e62acc24051a6523fee89bb911a61f9
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
The new implementations of qIsNull use naked floating point
comparisons to 0 and suppress the warnings for clang and gcc; so add
suppression also for icc.
Fixes: QTBUG-75644
Change-Id: I59aa1443666a542f38197f2b124503cc562708cb
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
It is needed to be able to fetch extra information about the display via
DXGI interface.
Change-Id: Id83982eb07ade157719e430d0abcc2613409a343
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Before the patch the notification was emitted only when the docker
was attached to the panel or changed a position on it.
It looks like the old behavior was documented in a unittest,
so this patch might actually be a "behavior change".
Change-Id: Id3ffbd2018a8e68844d174328dd1c4ceb7fa01d3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Users should use range constructors instead to do the conversion.
Keep conversion methods between QList and QVector as these will turn
into a no-op in Qt 6, whereas forcing people to use range constructors
would lead to deep copies of the data.
Change-Id: Id9fc9e4d007044e019826da523e8418857c91283
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This closes one compatibility gap with QList, to make
it easier to replace QList with QVector in Qt6.
Change-Id: I5655bc4cd2150a6f09a1ed68c0742f3b42ca47e4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The QML language server needs to use QUrl as that is what the language
server protocol uses to specify files.
As we cannot implicitly cast char to QChar in the bootstrap library, we
need to apply a build fix in qipaddress.cpp.
Change-Id: Ifaf8421457b1f734402b5aad965ecdec764a73e8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
QSharedPointer uses a dummy header for qdoc; the functions
were implemented and documented as qdoc comments, but not
added to the dummy header.
Change-Id: Iec78e3566a528631557067fbeb5606916ea74f2d
Reviewed-by: Martin Smith <martin.smith@qt.io>
Amends 0df30ff22e: when adding the
checked and unchecked styles to the combobox, it changed the offsets
for the heading styles; so the combobox stopped changing to the correct
index when clicking on a heading, and also changed the heading
two sizes smaller than it should when attempting to select a different
heading level.
Change-Id: Ib3f61987c786e34f32a81bf7b3ebc5ca730f40df
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
It was not possible to interactively create the example text without
this feature; and in general it's necessary to work with nested lists.
But currently it does not deal with all possible changes of list nesting,
because the API seems incomplete for that purpose.
Task-number: QTBUG-75589
Change-Id: I3e29ca15a2e7c37300a0103ceb90670716472ffb
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Adding xcb_flush after xcb_bell makes it work, no need to move the
mouse.
Fixes: QTBUG-75617
Change-Id: Ieeb47468bf31cfa6fcf2d48da56d54b9e6eac6fe
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Mips archs were removed from Android NDK long time ago.
Change-Id: Icf64a1e2cfbe3fe7307c7898b14fd199d9eeaad3
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Mark QSqlite2 plugin as obsolete so it can be removed with Qt6. The last
sqlite2 release was 2005 so it's time to remove this plugin in Qt6.
[ChangeLog][QtSql][SQlite2] Marked QSQLITE2 plugin as obsolete - it will
be removed with Qt6 together with the QTDS plugin
Change-Id: I9861331d4eb2b13f38b9e0e09ad9472b70e9b6e2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
ask our users to use the range constructors instead. This will allow
us to remove the include dependency towards <list> and <vector> in
Qt 6.
Change-Id: Id90f2058432e19941de1fa847100a7920432ad71
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qt starts drag-and-drop on a mouse button press event. Cococa in
this case won't send the matching release event, so we have to
synthesize it here.
Task-number: QTBUG-72417
Change-Id: I645b6a2733c1ea11ac4545cf3405f826af45fa47
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Do not store this variable locally, because
a) it might change if the SDK location changes
b) does not play well with Qt installer packages which would provide the
include path of the build machine.
To achieve this we introduce the (usual) magic value - for
QMAKE_EXPORT_INCDIR_VULKAN to denote "do not export this value".
Fixes: QTBUG-73796
Change-Id: Ied26ee12cbcdf7f5f6e1caef5d29dadf6309c5d6
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
I was using a cheap usb-stick from ALDI supermarket with fat32,
and my application crashed because filesystem was empty.
Unrealistic scenario, but still just returning here false is better
than a crash
Change-Id: I8979d5a4e19ce57770ab03983e847b272ebf7019
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We get a call to storeFont for each supported script-type of
a font, but we use the font signature to register all the supported
types at once, and can thus save ~3/4 calls to addFontToDatabase.
Change-Id: I9d06252fb7f805e7babac58d82fa412ec4e0e36a
Fixes: QTBUG-59360
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Don't call or implement functions which are not available when compiling
with QT_DISABLE_DEPRECATED_BEFORE=0x050d00
Change-Id: I949b12bba880c516391f312f58c8748303a1790d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In Windows there are package-based systems like MSYS2 that provide
pkg-config for packages lookup.
This change skips autodetection only for MSVC which doesn't
provide the aforementioned feature.
Task-number: QTBUG-57436
Change-Id: Iaed517e93031adbd2fd9dbf350764f76569b94ea
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Fixes:
.../qcolorspace_p.h:70:25: warning: explicitly defaulted copy assignment operator is implicitly deleted [-Wdefaulted-function-deleted]
QColorSpacePrivate &operator=(const QColorSpacePrivate &other) = default;
^
.../qcolorspace_p.h:63:28: note: copy assignment operator of 'QColorSpacePrivate' is implicitly deleted because base class 'QSharedData' has an inaccessible copy assignment operator
class QColorSpacePrivate : public QSharedData
^
Change-Id: I20d453279ec2cb8b9b9d1364762c6e560d6f843d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Property flags such as SCRIPTABLE should not get controlled by
a function. I can't see this feature being used anywhere and it
leads to additional overhead that I'd like to get rid of for Qt 6.
Change-Id: Iaa10b2b3bfb7eec11401f7b6bb887c9467b67183
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
