Do not set ANDROID_EMBEDDED unconditionally, as that for now is the
least likely configuration and it won't compile when the sysroot is real
Android.
If this gets revived, then it can be done by setting ANDROID_EMBEDDED in
the cache file directly via the cmake command line.
Change-Id: Ic1e1731f981414bd90b89fe91eaf0543a87d8c88
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The warning used to be a fatal error, until we found out that certain
packages might provide optional targets, or provide one target
out of a possible set.
Until we figure out a better way to deal with that, remove the
barrage of warnings while configuring.
Change-Id: Iacf93a997a8f87f81167ac7c4cc991212e7fca5d
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Jean-Michaël Celerier <jean-michael.celerier@kdab.com>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
We have find module wrappers for various system libs that use
FindPkgConfig. The _FOUND variable will be set to 1 if pkg-config
--exists returned true, but the imported target will not be created when
for example the provided library paths or header include paths are
outside of the sysroot - a good sanity check by cmake.
We require the targets for use though, so therefore we must unset the
_FOUND variable if we can't locate the targets.
Change-Id: Ia0dea657684a1847148664521265c42585890645
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We use
qt_find_package(SQLite3 PROVIDED_TARGETS SQLite::SQLite3)
which intends to find cmake's FindSQLite3.cmake and expects the
existence of the corresponding target. However qt_find_package first
tries to call find_package in config mode, which does not interact well
with vcpkg's sqlite, where sqlite3-config.cmake is provided to support
multi-config targets. So that call will appear to succeed, yet the
expected targets are not there of course.
Therefore this patch adds a sanity check for the target existence and
allows for a fallback to the module mode for find_package, in order to
find CMake's FindSQLite3.cmake.
Change-Id: I660f26c38369c3504df1c590e9d3a51ff1f65c6c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Also fix the QT_BUILD_SHARED_LIBS usage. While building qtbase, it
is assigned later than the call for
qt_generate_global_config_pri_file(), so it used always choose static.
Make sure to check for BUILD_SHARED_LIBS as well.
Change-Id: I66f03e5adacc89646147fc96154bee8002b2b9cc
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We used to copy a qconfig.cpp.in file verbatim.
Add some plumbing to actually compute the strings and their lengths
as it is done in qtbase/configure.pri.
Also make sure to replace the hardcoded linux mkspec with one that is
automatically determined.
Of course both the detection of the mkspec, and the hardcoded strings
for include, lib, etc. should be fixed in the future.
This is a stepping stone to allow building a Qt application using
the qmake built by CMake.
Change-Id: I2e6754f44b20b09b09d14fd85785d56288e6517b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
* Generate module .pri files
* Generate qconfig.pri
* Propagate MODULE_CONFIG from the .pro files
This enables the basic use-case of simple application builds that for
example use the moc. Omitted from the patch is support for private
module configurations, prl files (should we do this?) and possibly more
hidden gems that need to be implemented to for example support building
Qt modules with qmake.
Task-number: QTBUG-75666
Change-Id: Icbf0d9ccea4cd683e4c38340b9a2320bf7951d0d
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Toolchain files from sysroots (such as Yocto or Android) typically set
the CMAKE_FIND_ROOT_PATH_MODE_PACKAGE to ONLY to ensure that no external
packages are accidentally found. Similar to how we discover the Qt tools
packages for cross-compiling, we need to temporarily change the mode to
BOTH to locate our build internals.
Change-Id: Ib4374ee4a974379213218b7ec430637857ed02e7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Since LINUX is not set when targeting Android, we must extend these
conditions manually.
Change-Id: Ie78167d452e0806bfa64773c1e311a99f4a28f8c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We record extra CPU features such as neon, etc. in the sub-architecture
field, which may very well be empty. Allow for that and avoid cmake
warnings about indexed string access beyond the string boundaries.
Change-Id: I63e61c6427d156180039b8ac6f5b0f5f55c36ee8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When we replace the PWD key from qmake files and both the base and
current directory are the same, there's no need to add an extra './' to
the current working directory.
This also fixes a unit test in qtsvg as it requires the passed in path
to match exactly to the one outputed in the log files.
Change-Id: Ide9ca6a70493e8039d3af84a9e576d8f6a313f2a
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is meant to keep repo specific functions and macros that should
not pollute QtSetup.cmake. For example QtDeclarativeSetup.cmake
will automatically be included when building qtdeclarative.
Change-Id: I4d26cbb1a7ffafb153a888fc918af337000d5e41
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
The location of the forwarding headers when not yet installed, depends
on whether we do a prefix or non prefix build.
In a prefix build the /include folder should be in the current repo
build dir.
In a non prefix build, it should be under qtbase/include.
But the actual generated files to which the forwarding headers point,
are always in the current repo build directory.
Also syncqt needs to know both the current repo build directory
specified by -builddir, and the output directory specified by
-outdir.
In a prefix build, both are the same.
In a non-prefix build, builddir should be the current repo build dir,
and outddir should be qtbase's build dir.
Also for non-qtbase repo build directories (like declarative),
examples need to have the current_repo_build_dir/include directory
as an include path, so that framework style includes like
#include <QtQml/QQmlEngine>
work correctly.
Take care of all that, and add a bunch of comments explaining the whole
injected / generated headers interaction.
Change-Id: I612ad7549ce499c4979ee994e998b558716d45ca
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Check for the existence of CMakeLists.txt files before trying
to call add_subdirectory on examples, tests and src folders.
Change-Id: I7be76de5f7520c1dd181c610fd1dc2200ac74672
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Added library mapping information for any projects referencing the
QtNetworkAuth project.
Change-Id: I9c4309d26ee9895f94995d4844ffde4ee4444766
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
These were some hard requirements while porting QtQml .pro files so
that the generated CMake code is syntactically correct and the result
buildable.
This include handling of a few more different condition scopes
and disabling the c++ make_unique feature test.
Change-Id: Iae875ffaf8d100296e8b56b57d076455e5d72006
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
QtQml uses QLALR to generate a grammar, but the qmake qlalr feature
seems to be a general one, so the corresponding CMake implementations
are kept in qtbase for now.
Change-Id: Ibe916878b18155ddc5bb08793dd2075ebfa8f282
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
For developer builds, enable the compile commands database by default.
This allows Qt developers to use tools that utilize these (such as
clang-tidy, etc.) without any extra setup.
Change-Id: I79d70ef7dbe7c59864e93593c75f9ff6cd67c2ce
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
Some configure.json files contain new lines inside quoted strings,
which is not conformant with the JSON spec.
Add a new json_parser python module which uses pyparsing to preprocess
the json files to remove the new lines inside the quoted strings, and
then hands over the preprocessed content to the regular json module.
Change-Id: I5f8938492068dda5640465cc78f5a7b6be0e709a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Upstream's cmake build system installs libzstd_static for static builds,
so look for that as well. Now we can also recommend installing it via
vcpkg.
Change-Id: I0ba4c45ecd90bf7b1c9f1e5f84a440caa976a23c
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Let's recommend vcpkg only on Windows for now. That's best maintained
and works best there.
Change-Id: Ied06b6a3cb26d9e56d3f525c1d5a410223754fba
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
We constantly had to adjust the qmake grammar to handle line
continuations (\\\n) in weird places. Instead of doing that,
just do a preprocess step to remove all the LCs like we do with
comments, and simplify the grammar not to take into account the
LCs.
From some manual testing it doesn't look like we get any regressions.
Change-Id: I2017d59396004cf67b6cb54977583db65c65e7d3
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
setName() and setDebug() need to be called on a parser element before
the parser element is used as a sub-element in another parser element,
otherwise the debug output is not shown.
Hence the "iterate over all locals" approach works only partially.
Instead add a new decorating function add_element() for the
construction of each parser element, and make sure to enable debugging
inside that function.
Unfortunately there is no clean way to avoid duplicating the parser
element name both in the local variable and in the function argument.
Change-Id: Iaa9ed9b7dbb22ec084070b9c049cf51c841d442c
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Some qtdeclarative pro files caused exceptions when trying to parse
them using the script. This included the following:
- handling conditions divided by newlines and backslashes
- handling conditions that have no scope
The parser has been fixed to deal with those cases and relevant
tests were added.
After the change, all qtdeclarative project files are parseable by
the script.
Change-Id: Ib9736423f7fb3bcc1944b26cfb3114306b4db9a7
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Override the default debug actions to be decorated with proper
indentation for easier reading.
The setup only has to be done once, and not on each QMakeParser
creation.
Change-Id: If5f965b462c782c654ee8ebfdd33570e8f94b084
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Before this patch we enabled AUTOMOC, AUTORCC, AUTOUIC for all targets
that did not opt out.
Aside from being wasteful from a performance point of view,
this also caused issues when trying to build qtimageformats which
does not depend on Widgets which is the package that exposes uic.
To avoid this, enable only AUTOMOC for all targets by default, and
UIC and RCC can be opted in via the ENABLE_AUTOGEN_TOOLS option.
To facilitate this some refactoring had to be done, like moving some
common setup for all autogen tools into a separate call, and making
sure that extend_target understands the autogen options, because some
ui files are only added conditionally.
Also the conversion script has been adapted to output the
ENABLE_AUTOGEN_TOOLS option whenever a .pro file contains at least
one FORMS += foo assignment.
Note that we don't really use AUTORCC while building Qt, so nothing
opts into that at the moment.
Task-number: QTBUG-75875
Change-Id: I889c4980e9fb1b74ba361abed4044737f8842ea4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
These arguments are specific to the build and changes to them are _not_
affecting configuration.
Change-Id: I8c46a0dbea8978f13e78c5cb8f41987f4fde09c8
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Liang Qi <liang.qi@qt.io>
The variable was not reset when interating through all the Qt targets,
which resulted in QtTest wronlgy depending on QtWidgetTools.
Task-number: QTBUG-75875
Change-Id: I24da495fa53e9163992a1ed53f5cd7e1c6da5e51
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Signing package may take more then 10s while calling echo really
should take less then 60s ;-)
Change-Id: I1798981492d1467bb8b20099ea705b08ea9b0914
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The number of CPUs is set implicitly by MAKEFLAGS and NIJAFLAGS.
Change-Id: Ie9296f9a7872253c696536d7b3d6235c7881d42b
Reviewed-by: Liang Qi <liang.qi@qt.io>
At the moment, Coin builds tests as a separate qmake invocation
against an installed Qt. We need to support the same with CMake.
Change the tests subdirectory to be a standalone CMake project when
CMake does not detect an existing QtTest target while processing the
subdirectory. If the target exists, it means we are building the whole
repo, if the target does not exist, we need to call find_package
to find the installed Qt.
Refactor and move around a few things to make standalone tests build
successfully:
- add a new macro to set up paths to find QtSetup
- add a new macro to find all macOS frameworks
- add a new macro to set up building tests
- add a new macro that actually builds the tests
- export the INSTALL_CMAKE_NAMESPACE value into the BuildInternals
Config file
- export the CMAKE_BUILD_TYPE value, because a test project doesn't
have a .git subdir and thus defaults to be built in Release
mode, even though qtbase might have been built in Debug, so to
avoid the mixing, the propagate the build type
- stop overriding INSTALL_CMAKE_NAMESPACE and
QT_CMAKE_EXPORT_NAMESPACE inside QtSetup if they are set, because
the tests project doesn't specify a major version, and if we
override the values, the moc / uic targets don't get the correct
major version prefix and configuration fails
Change-Id: Ibdb03687302567fe325a15f6d1cb922c76240675
Fixes: QTBUG-75090
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Some Linux distros might not have a double-conversion library. Because
it is such an essential library for QtCore, compile and use the
the copy of the library bundled with Qt.
Also change library name to be a proper target with double colons,
so that in case the library is not found for some reason, the CMake
configure step would fail, instead of failing at link time.
Task-number: QTBUG-74133
Change-Id: I9f3b4298ae6e952891a7a89541d46878176bf1ce
Fixes: QTBUG-75891
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Handle a few more libraries that are used in qtimageformats repi.
Change-Id: Ia3b9a845bc6cb8ce98a477b9355011bbadc32c1a
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Add a prefix for generated .qrc files so for in-source builds we don't
end up overwriting htem.
Change-Id: I8eef582479eb45d67585f6aab87b288393bbadb5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Implement some aspects of qt_parts.prf to simplify the top-level
CMakeLists.txt for repositories that follow the common qt structure
(src, tools, tests, examples).
Change-Id: Ia35f4e9207e92c1cf0406353561b0cc52dcb0e59
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Some qt modules need to find 3rd party packages for which there
are no Config files. We need to write custom CMake Find modules to
find those packages. These find modules need to be installed so that
they are used when a user consumes the Qt packages.
Automatically include and install these find modules if they exist,
as part of qt_build_repo_end().
Change-Id: I14aad35ed2999cac8bdda65ca4aeaf74d04fdb71
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
The previous fix where the Grammar comment style was changed to
remove the newlines was incorrect, because if you have
foo=1#comment
bar=2
after the Grammar comment ignoring, it would transform into
foo=1bar=2
which will clearly fail to parse, so the new line has to stay.
But we would still have the following case which would fail:
foo=a \
# comment
b
Apparently qmake things that's the equivalent of
foo=a b
but the grammar parses it as
foo=a \
\n (newline)
b
Thus the parsing fails because there's a newline and then some
weird 'b' token which the grammar does not expect.
The best fix I found is to preprocess the source, to remove
completely commented out lines.
So:
foo=a \
# comment
b
gets transformed into
foo=a \
b
Change-Id: I2487a0dbf94a6ad4d917d0a0ce05247341e9b7da
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
It doesn't make much sense to look for X11 related packages on
macOS and Windows by default. Usually they would not be there, and
as a result the configuration step would show a long list of scary
not found packages, and also eat precious configure time.
Change the conversion script to allow putting conditions around
generated find_package calls.
These conditions can be manually set in the conversion script
library mapping, using the emit_if argument,
which we do for the X11 and Wayland related packages.
They are also computed by checking which features use a given library,
and if the feature is protected by a simple emitIf condition like
config.linux, the relevant library find_package call will be protected
by the same condition.
If a developer still wishes to look for all packages, they can define
the CACHE variable QT_FIND_ALL_PACKAGES_ALWAYS to ON.
The relevant configure.cmake files are regenerated in this patch.
Change-Id: I6f918a94f50257ec41d6216305dae9774933389a
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
