Instead of QCoreApplication::quit() directly calling exit(0), which would
leave QGuiApplication and client code out of the loop, we now send the
Quit event, and let it pass through event delivery, before finally ending
up in QCoreApplication::event(), where we call exit(0).
This has the advantage that QGuiApplication can ensure all windows are
closed before quitting, and if any of those windows ignore the close
event the quit will be aborted. This aligns the behavior of synthetic
quits via QCoreApplication::quit() with spontaneous quits from the
platform via QGuiApplicationPrivate::processApplicationTermination.
Clients who wish to exit the application without any event delivery or
potential user interaction can call the lower level exit() function
directly.
[ChangeLog][QtGui] Application termination via qApp->quit() will now
deliver Quit events to the application, which in turn will result in
application windows being closed as part of the application quit,
with an option to cancel the application quit by ignoring the close
event. Clients who explicitly want to exit the application without
any user interaction should call QCoreApplication::exit() explicitly.
Task-number: QTBUG-45262
Task-number: QTBUG-33235
Task-number: QTBUG-72013
Task-number: QTBUG-59782
Change-Id: Id4b3907e329b9ecfd936fe9a5f8a70cb66b76bb7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Make QTBF ready for Qt6 by using qsizetype in the API and use
QStringView where it makes sense.
Change the exported API of qunicodetools to use QStringView as
well and use char16_t internally.
Change-Id: I853537bcabf40546a8e60fdf2ee7d751bc371761
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Calibrated to match F16C and ARM-FP16 hardware conversions.
Change-Id: I3bdd4d3db3046fee4aeb24e4ce8b9bc9a06e0397
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Just starting 20 threads to test this won't cut it if
the machine you're testing on has an ideal thread count
of 16 or larger.
Change-Id: Icba8f00aa836fec6da41c71b318e9e17bdd47c0e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Since waiting for a spy employs polling, it may happen
that while waiting for a startedSpy we had received already
a signal for finishedSpy. This explains current flakiness.
The fix is to connect to lambdas instead and update
the hit count accordingly. Inside lambdas we also
ensure the correct order for started / finised signals.
After waitForFinished() unblocks we ensure that possible
pending asynchronous signals (started / finished) are processed
and check the final state.
Task-number: QTBUG-83076
Change-Id: I16963ef9c011cb613d7b409d3e3032303a942336
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Addresses ### Qt 6 comment, and documentation pointing out that the parameter
value is ignored. It wasn't ignored in the code, but that's the kind of change
we can make now.
With this change, QUnifiedTimer::updateAnimationTimers is only called with -1
as the currentTick input parameter, also from Qt Declarative. Make it default,
so that leaf modules can be fixed. Once that it done, the parameter can be
removed completely.
Change-Id: I80c57ff92f3b615b932dd73d711cf6397347efd8
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
C++20 via P1120 is deprecating arithmetic operations between
unrelated enumeration types, and GCC 10 is already complaining.
Hence, these operations might become illegal in C++23 or C++26 at
the latest.
A case of this that affects Qt is in key combinations: a
QKeySequence can be constructed by summing / ORing modifiers and a
key, for instance:
Qt::CTRL + Qt::Key_A
Qt::SHIFT | Qt::CTRL | Qt::Key_G (recommended, see below)
The problem is that the modifiers and the key belong to different
enumerations (and there's 2 enumerations for the modifier, and one
for the key).
To solve this: add a dedicated class to represent a combination of
keys, and operators between those enumerations to build instances
of this class.
I would've simply defined operator|, but again docs and pre-existing
code use operator+ as well, so added both to at least tackle simple
cases (modifier + key).
Multiple modifiers create a problem: operator+ between them yields
int, not the corresponding flags type (because operator+ is not
overloaded for this use case):
Qt::CTRL + Qt::SHIFT + Qt::Key_A
\__________________/ /
int /
\______________/
int
Not only this loses track of the datatypes involved, but it would
also then "add" the key (with NO warnings, now its int + enum, so
it's not mixing enums!) and yielding int again.
I don't want to special-case this; the point of the class is
that int is the wrong datatype. Everything works just fine when
using operator| instead:
Qt::CTRL | Qt::SHIFT | Qt::Key_A
\__________________/ /
Qt::Modifiers /
\______________/
QKeyCombination
So I'm defining operator+ so that the simple cases still work,
but also deprecating it.
Port some code around Qt to the new class. In certain cases,
it's a huge win for clarity. In some others, I've just added
the necessary casts to make it still compile without warnings,
without attempting refactorings.
[ChangeLog][QtCore][QKeyCombination] New class to represent
a combination of a key and zero or more modifiers, to be used
when defining shortcuts or similar.
[ChangeLog][Potentially Source-Incompatible Changes] A keyboard
modifier (such as Qt::CTRL, Qt::AltModifier, etc.) should be
combined with a key (such as Qt::Key_A, Qt::Key_F1, etc.) by using
operator|, not operator+. The result is now an object of type
QKeyCombination, that stores the key and the modifiers.
Change-Id: I657a3a328232f059023fff69c5031ee31cc91dd6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Traditionally when calling reserve it's because you expect to append
up to X amount of bytes. We should keep that behavior the same.
With another patch still in the works current behavior caused an issue
with QStringBuilder in QNAM, as mirrored in the testcase attached.
Change-Id: I9792a8f158fc9235e3de48ac8b06ac2c10e7f3dc
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Views / delegates absolutely *adore* hammering data(). A simple
QListView showing a couple of dozens entries can call data()
a hundred of times on the first show.
Back of the hand calculation,
* 2 times per visible item (sizeHint() + paint()),
* times 9 roles used by the default delegate,
* times 20 visible items
= 360 as a bare minimum, assuming the view doesn't redraw twice
accidentally. Move the mouse over the view, and that'll cause
a full update with certain styles: 360 calls to data() per update.
This has an overhead visible in profilers. The model's data()
has to re-fetch the index from its data structure and extract
the requested field every time.
Also, QVariant is used for the data interexchange,
meaning anything that won't fit in one is also a memory allocation.
This problem will likely be gone in Qt6Variant as that
will store sizeof(void*) * 3, meaning QImage/QPixmap and similar
polymorphic classes will fit in a QVariant now...
So I'm trying to to remove part of that overhead by allowing
views to request all the data they need in one go. For now,
one index a a time.
A view might also store the data returned. The idea is that
the same role on different indexes will _very likely_
return variants of the same type. So a model could move-assign
the data into the variant, avoiding the memory allocation
/deallocation for the variant's private.
This patch:
1) Introduces QModelRoleData as a holder for role+data.
2) Introduces QModelRoleDataSpan as a span over QModelRoleData.
The idea of a span type is twofold. First and foremost, we are
in no position to choose which kind of container a view should
use to store the QModelRoleData objects for a multiData() call;
a span abstracts any contiguous sequence, leaving the view free
to do whatever it wants (statically allocate, use a vector, etc.).
It also solves the problem of efficient passing the roles and
gathering the returned variants from multiData().
3) Add multiData(), which populates a span of roles for a given
model index. The main advantage here is that a model can fetch
all the needed information for a given index just once, then
iterate on the span and provide data for each requested role.
Cf. this with data(), where every call has to re-fetch
the information for the index.
A couple of models have been ported to multiData(), as well as
QStyledItemDelegate.
[ChangeLog][QtCore][QModelRoleData] New class.
[ChangeLog][QtCore][QModelRoleDataSpan] New class.
[ChangeLog][QtCore][QAbstractItemModel] Added the multiData()
function.
Change-Id: Icce0d108ad4e156c9fb05c83ce6df5f58f99f118
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
So far QPropertyAlias was limited to working with QProperty<T>.
Change the implementation, so it can be constructed from any
property or even a QBindable<T>.
Change-Id: I175cffe94a9ef332367d39faa976eb065b0e6ffe
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Add a new BINDABLE declaration to the Q_PROPERTY() macro that tells moc
where to find the QBindable for the property.
Add a QUntypedBindable base class to QBindable<T> that gives access to
generic functionality and checks argument compatibility at runtime.
QBindable<T> will still do static checking at compile time.
Add QMetaProperty::isBindable() and QMetaProperty::bindable()
to be able to dynamically access the binding functionality.
Change-Id: Ic7b08ae2cde83fd43e627d813a886e1de01fa3dc
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Add a compatibility property class that makes porting to the new
property system as simple as possible.
Binding evaluation for those compat properties is eager, as we
do not control possible side effects of the code in the existing
setters.
Change-Id: Ic56347abb49e40631ec73e88c6d40d4bdb05ca29
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Add a QObjectComputedProperty. This class doesn't store the data
itself, instead relies on a getter method to compute it's value.
As the property is read-only, one can not bind to it, but it can
be used in other property bindings.
Change-Id: I0f6bffdd9f80f1d0829826f93a47257f2b3127af
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Add Q_OBJECT_BINDABLE_PROPERTY() macro that can be used to define
a bindable property inside QObject.
The macro and the class behind it creates storage for a property
that is bindable inside a QObject or QObjectPrivate. The property
only uses as much space as the data contained, ie. it has no
storage overhead, as long as no bindings are being used.
Bindings are being stored and looked up in the QBindingStorage
associated with the owning object.
Change-Id: I1dadd7bddbad6fbf10cfa791d6461574b9db82dd
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Add a private QBindableInterface and a public QBindable<T>
class, that will be the API interface for accessing bindings
for properties in QObject.
The QBindable class gives access to all aspects of
the property related to bindings. This includes setting
and retrieving bindings, installing observers and creating
a direct binding on this property.
Change-Id: Iaead54d2bd6947bd2cda5052142b2a47dd8bf7c4
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
These look rather weird, an explicit property.setBinding() call
is simply better in this case, and also more aligned with the API
we can offer in QObject.
Change-Id: Ifb00fd47a75e6b3bc94e34bf49e4f13249565bfe
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
And all related functionality. This is being replaced by
Q_BINDABLE_PROPERTY and Q_OBJECT_BINDABLE_PROPERTY in the
next few commits. The new infrastructure coming will play
nicer along with the existing property system.
Commented out some autotests, that will get reimplemented
with the updated infrastructure.
Change-Id: I50c30bd4d5c6c6b6471f8eb93870e27d86f5a009
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Rename QPropertyBase to QPropertyBindingData, as it contains the
data related to bindings. The new name fits better, as the data
can now also live somewhere else than the data strored in the
property.
Change-Id: I489efb86ad2e0bad2740c9d1aa74506fe103d343
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Since we will be storing property data differently in most cases,
having this special case would create too many additional complications.
Change-Id: I27042b0730559bb375d8e3c07324398403a9885d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Enable the arrow operator for all types that could have members, so
that one can e.g. write myStringProperty->size() instead of having to
use the less convenient myStringProperty.value().size().
Also cleaned up the rvalue ref overloads to be
disabled for basic types. For those we now also
return by value, for more complex types we
return a const reference.
Change-Id: If6a75898dc0a097f57052488f0af0cd7166b3393
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
If one needed to listen to a signal just once, one had to
store the QMetaObject::Connection object returned by connect()
and use it to disconnect the slot after the first signal
activation.
This has led to a proliferation of using wrappers (and enough
TMP); they usually look like this:
1) create a shared_ptr<QMO::Connection>, allocating its payload;
2) create a lambda, capturing the shared_ptr by value;
3) in the lambda, disconnect the connection (through the shared_ptr),
and call the actual slot;
4) connect the signal to the lambda, storing the returned
QMO::Connection into the shared_ptr.
This is expensive, error prone for newcomers, and tricky to
support as a general facility inside one's projects.
We can do better, just support single shot connections right
in QObject.
[ChangeLog][QtCore][QObject] Added the Qt::SingleShotConnection
flag. When a connection is established with this flag set,
the slot is going to be activated at most once; when the signal
is emitted, the connection gets automatically broken by Qt.
Change-Id: I5f5feeae7f76c9c3d6323d841efba81c8f98ce7e
Fixes: QTBUG-44219
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
One could guess it by assuming that disconnecting for a destroyed
receiver and disconnect() with given receiver use the same
implementation, but without closely knowing the implementation a
reader of the documentation can't know for sure.
Also add a test to prove that what the new documentation says is
really true.
Also remove an unnecessary negation in the preceding sentence.
Change-Id: I9d24442bb1a4646b89f969bad1a4d0e1eafa7534
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This is in line with QMetaType and will be used to implement a mutable
QSequentialIterable. Later on, a QMetaAssociation will be added as
well, to implement a mutable QAssociativeIterable.
The code here represents the minimal set of functionality needed to have
a practical sequential container. The functionality is not completely
orthogonal. In particular, the index based operations could be
implemented in terms of iterator-based operations.
Task-number: QTBUG-81716
Change-Id: Ibd41eb7db248a774673c701549d9a03cbf2e48b6
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
We need to add these two classes at the same time, because
QAnyStringView makes all QUtf8StringView relational operators moot. We
might want to add some later, esp. for UTF-8/UTf-8 comparisons, to
avoid the pessimization that we can't early-out on size() mismatch in
QAnyStringView equality operators, but that's an optimization, not a
correctness issue, and can be fixed in a source-compatible way even
after Qt 6 is released.
To deal with the char8_t problem in C++20, make QUtf8StringView a
class template out of which two UTF-8 views can be instantiated: the
Qt 7 version, which depends on C++20 char8_t as value_type, and the Qt
6 version where value_type is a char. Use inline namespaces to map the
QUtf8StringView identifier to one or the other, depending on the C++
version used to compile the user code. The inline namespace names must
needs be a bit ugly, as their inline'ness depends on __cpp_char8_t. If
we simply used q_v1/q_v2 we'd be blocking these names for Qt inline
namespaces forever, because it's likely that inline'ness of other
users of inline namespaces in Qt depends on things other than
__cpp_char8_t. While inline'ness of namespaces is, theoretically
speaking, a compile-time-only property, at least Clang warns about
mixed use of inline on a given namespace, so we need to bite the
bullet here. This is also the reason for the QT_BEGIN_..._NAMESPACE
macros: GCC is ok with the first declaration making a namespace
inline, while Clang warns upon re-opening an inline namespace as a
non-inline one.
[ChangeLog][QtCore][QUtf8StringView] New class.
[ChangeLog][QtCore][QAnyStringView] New class.
Change-Id: Ia7179760fca0e0b67d52f5accb0a62e389b17913
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Since 5.0: assignment/construction from QObject pointer
Since 5.14: data() to recover the packaged pointer
Change-Id: I5d6ab561ce39bc0d9d3e5035eb2ca38139cd76b6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The Unicode table code can only be safely called on valid code-points.
So code that calls it must only pass it valid Unicode data. The string
iterator's Unchecked Unchecked methods only provide this guarantee
when the string being iterated is guaranteed to be valid UTF-16; while
client code should only use QString, QStringView and friends on valid
UTF-16 data, we have no way to be sure they have respected that.
So take the few extra cycles to actually check validity in the course
of iterating strings, when the resulting code-points are to be passed
to the Unicode table look-ups. Add tests that case mapping doesn't
access Unicode tables out of range (it'll trigger the new assertion).
Added some comments to qchar.h that helped me understand surrogates.
Change-Id: Iec2c3106bf1a875bdaa1d622f6cf94d7007e281e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add Q_REQUIRED_RESULT to force callers to check the return; the
QTranslator object is unusable if load() fails.
Check the result in QTranslator's own test.
Task-number: QTBUG-85700
Change-Id: I07509c76470cc87626190670665cd3162bfb17e7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
A large slice of it has been deprecated since 5.2.
Reflowed a doc paragraph pointed out, in the deprecation commit, as
having been left ragged by its edits.
Note: qSwap() is documented as \deprecated but not marked, where it's
defined, as deprecated.
Change-Id: Iaff10ac0c4c38e5b85f10eca4eedeab861f09959
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
PCRE2 already uses size_t which we can now make full use of.
Change-Id: Icb5efd5c6ef27f2e31a9780bf62f5671ddc603cd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As there is now a chance that a QMetaMethod already contains the
metatypes for its arguments, we can just query it directly (and use the
fallback to name lookup logic that already exists there).
This also allows us to avoid creating a QList of names, and only
requires us to do a name lookup in case the connection actually fails.
Change-Id: Idda30bc4b538a94476ae6c533776c22340f0030d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I don't think we want to have implicit conversion
from a const char * or a QByteArray to a QUuid.
Change-Id: Idfe7450ce15b89e295aa7af7ccf1fc94f5acd4f9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Restored previously deleted logic of setting GrowsBackwards flag for
prepend-like cases. This should be sufficient to fully enable prepend
optimization
Fixed QList::emplace to not use implementation detail logic. Updated
tests to cover changed behavior and its correctness
Task-number: QTBUG-84320
Change-Id: I4aadab0647fe436140b7bb5cf71309f6887e36ab
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Introduced prepend optimization logic to QCommonArrayOps.
Trying to rely on original QList behavior
Task-number: QTBUG-84320
Change-Id: I46e6797b4edad804a3e3edb58307c9e96990fe01
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Introduced allocation function in QArrayDataPointer with
interface similar to QArrayData::allocate that supports growing
strategies. This func is used instead of the original in cases
when prepend-aware storage is needed. Tried to follow Qt5 QList
policy in terms of space reservation
Updated QPodArrayOps::reallocate to be aware of growing
shenanigans. It doesn't look like a perfect solution but it is
rather close and similar to what Qt6 QList is doing when not
growing (e.g. reserve/squeeze)
Added initial QCommonArrayOps with helper function that tells
when reallocation is preferable over just using the insert-like
operation. This comes up later on when GrowsBackwards policy is
properly supported in operations
Essentially, 2/3 main data management blocks for prepend optimization
are introduced here. The last one being a generalized data move that
is done instead of reallocation when existing free space is not enough
Task-number: QTBUG-84320
Change-Id: I9a2bac62ad600613a6d7c5348325e0e54aadb73d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Currently QFuture::waitForFinished() exits as soon as the future is not
in the running state. If the user calls it before
QPromise::reportStarted() is called, it will exit immediately, because
nothing is running yet. Fix the behavior to wait for the finished state.
[ChangeLog][Important Behavior Changes][QtCore] Fixed the behavior of
QFuture::waitForFinished() to wait until the future is actually in the
finished state, instead of exiting as soon as it is not in the running
state. This prevents waitForFinished() from exiting immediately, if at
the moment of calling it the future is not started yet.
Task-number: QTBUG-84867
Change-Id: I12f5e95d8200cfffa5653b6aa566a625f8320ca8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QString still has the overloads of relational operators taking
QByteArray. Add back QByteArray's relational operators taking
QString for symmetry. See also the comments of
d7ccd8cb45 for more details.
[ChangeLog][EDITORIAL] Remove the changelog about QString/QByteArray
operators being removed. They're back.
Change-Id: I22c95e727285cf8a5ef79b3a4f9d45cb66319252
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QCoreApplication has a special internal mechanism to control whether
the event dispatcher should block after delivering the posted events.
To handle queued connections in nested loops properly, we should use
that functionality.
Pick-to: 5.15
Fixes: QTBUG-85981
Change-Id: I124179a23b26a995cf95ed379e97bfa62c95f42a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
First, use QT_MKDIR instead of QFileSystemEngine::createDirectory(), as
the latter can't create a directory with the right permissions. That
would allow an attacker to briefly obtain access to the runtime dir
between the mkdir() and chmod() system calls.
Second, make sure that if the target already exists that it is a
directory and not a symlink (even to a directory). If it is a symlink
that belongs to another user, it can be changed to point to another
place, which we won't like.
And as a bonus, we're printing more information to the user in case
something went wrong. Sample outputs:
QStandardPaths: runtime directory '/root' is not owned by UID 1000, but a directory permissions 0700 owned by UID 0 GID 0
QStandardPaths: runtime directory '/dev/null' is not a directory, but a character device, socket or FIFO permissions 0666 owned by UID 0 GID 0
QStandardPaths: runtime directory '/etc/passwd' is not a directory, but a regular file permissions 0644 owned by UID 0 GID 0
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-tjmaciei'
QStandardPaths: runtime directory '/tmp/runtime-tjmaciei' is not a directory, but a symbolic link to a directory permissions 0755 owned by UID 1000 GID 100
Pick-to: 5.15 5.12 5.9
Change-Id: Iea47e0f8fc8b40378df7fffd16248b663794c613
Reviewed-by: David Faure <david.faure@kdab.com>
The convenience API used to look up the index of a named capturing
group expects NUL terminated strings. Therefore, we can't just
use it together with QStringViews, which may be not. Use the
non-convenience API instead.
Pick-to: 5.15
Change-Id: I25ca14de49b13ee1764525f8b19f2550c30c1afa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove QTypeInfo::isStatic, as that's not used anymore in Qt 6.
Also remove sizeOf, it's unused, and we have QMetaType for that if
required.
Remove all typeinfo declaractions for trivial types, as the default
template covers them correctly nowadays.
Finally set up a better default for isPointer, and do some smaller
cleanups all over the place.
Change-Id: I6758ed37dfc701feaaf0ff105cc95e32da9f9c33
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
While it could be done before it's nice to not have a custom "local"
struct or the size in an out-parameter.
Change-Id: Ie910f7060b1dadf037312d45e922f8e2deafe3ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Better to provide the correct meta type to convert to.
Change-Id: I8e0d46e4ba482186201c157e302c03874bd38e7b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
And remove one of the type id to name mapping that still
existed in QMetaType. QMetaTypeInterface can provide that,
so there's no need to have a second copy of the data.
qMetaTypeTypeInternal() can still map all the names of all
builtin types to ids. That functionality is for now still
required by moc and can't be removed yet.
Change-Id: Ib4f8e9c71e1e7d99d52da9e44477c9a1f1805e57
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It's only used for dynamic types in DBUS and QML, where we control
things good enough to be able to handle the lifetime of those
interfaces there.
Change-Id: Ia7f8970d17a85b195db85fcdc2d8f1febd8753f4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Those were not yet supported by QMetaType.
Change-Id: I9f85476049f200e35939ac58ef7e8b4e7cbe0b77
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use the fact that we return the conversion function as a lambda
to find out reliably whether a conversion between two types
can be done.
This requires some minor adjustments to our tests:
* Nothing can convert to an unknown type and vice versa
* Adjust results to the fact that we don't convert from char
to QString anymore (where the old method was incorrect)
* QStringList->QString requires some adjustments, as we only
convert if the string list has exactly one element. For now
we return true in canConvert(), but the conversion behavior
in this case is something we should rethink, as it is very
surprising.
Change-Id: I3f5f87ee9cb99d690f5a7d13b13d6a6313d8038e
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Take the opportunity to properly handle the underlying type
(size and signed vs unsigned).
Change-Id: I0cb8cf40acac6de03c24ed3fe570db68268952c8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This will ensure full symmetry in what QVariant and
QMetaType support. With this done, QVariant will become
simply a container that can hold any QMetaType with fully
symmetric functionality between both.
Change-Id: I796d4368a2bc0f08cf4f70f4465ed6a0e07bdd76
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
There's no point in storing small types with an external
refcount, even if they aren't movable. Simply copying
the type should be faster in pretty much all cases, while
this uses less memory.
Change-Id: I127474f8e3c5fa042f530684f9d5bfccbba134ca
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Refactor the methods retrieving data in Q*Iterable so
that we don't return pointers with unclear ownership. Instead,
copy the data into a out pointer provided by the caller.
This also means there is no need for the metatype flags
anymore and we can remove those.
Change-Id: I517de23a8ccfd608585ca00403aca0df2955f14b
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Store a QMetaType, not a meta type id in the classes.
Change-Id: If27a60512a46fa029cc914d65b8cad7f89d7f3b0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove the old revision of the interface, this is not
required with Qt 6 anymore, as everything is being
recompiled anyway.
Change-Id: I66070c4dc6b5e2a6d22f5a9ebea7688ed38333fe
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
And remove the old manual registration code for those operators.
Add some special handling for long/ulong, as these types could be
streamed as a QVariant so far, but are not directly streamable
through QDataStream.
[ChangeLog][QtCore][QMetaType] The QMetaType::registerStreamOperators()
and QMetaType::registerDebugStreamOperator() methods have been
removed. The streaming operators for a type are now automatically
registered together with the type registration. This implies that the
operators should be visible wherever the type is visible and being used.
[ChangeLog][Behavior Incompatible Changes] Because the QDataStream and
QDebug serialization operators are automatically registered with
QMetaType, the declarations of those functions must be present at any
point where the type is used with QMetaType and QVariant.
Change-Id: I4a0732651b20319af4a8397ff90b848ca4580d99
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reduce the scopes so that also the result of 1-arg-sliced() can be
called 'sliced'.
Change-Id: Ie156f76838f8650d6926d3c198007aaf12f90734
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QLatin1String::mid() etc were changed from narrow to wide contract,
but the narrow-contract replacements weren't added. This blocks using
the narrow-contract functions in QStringTokenizer.
As a drive-by, Q_REQUIRED_RESULT -> [[nodiscard]] and Q_DECL_CONSTEXPR
-> constexpr. Also centralize most Q_ASSERT()s in a single function,
verify(), in an attempt to reduce the amount of string data generated
from the asserts in assertive builds.
[ChangeLog][QtCore][QLatin1String] Added from(), sliced(), first(n),
last(n) functions.
[ChangeLog][QtCore][QLatin1String] size_type/size() is now qsizetype
(was: int). This makes QLatin1String(ptr, 0) ambiguous now between the
(ptr, ptr) and (ptr, qsizetype) constructors.
Change-Id: Ie195f66ae1974eb0752c058aa9f3b0853ed92477
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The serialization code neglected to check against null. Sinze zones
are saved either by IANA ID or in our special OffsetFromUtc format,
representing an invalid zone by a string that cannot possibly be a
valid IANA ID will do.
Fixes: QTBUG-86019
Pick-to: 5.15
Pick-to: 5.12
Change-Id: I6882026403d00f8b254aab34c645f1cf8f9fcc2d
Reviewed-by: Taylor Braun-Jones <taylor@braun-jones.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
setFilterRegExp retains the caseSensitivity() while setFilterRegularExpression did not.
Change setFilterRegularExpression to also retain the case sensitivity.
Fixes: QTBUG-83313
Pick-to: 5.15
Change-Id: I46f494d320aee99d50612f01f63558c693276989
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: David Faure <david.faure@kdab.com>
MidButton had its // ### Qt 5: remove me
upgraded to Qt 6 at 5.0; but it dates back to 4.7.0
Replace the many remaining uses of MidButton with MiddleButton in the
process.
Pick-to: 5.15
Change-Id: Idc1b1b1816673dfdb344d703d101febc823a76ff
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Export some private functions from QUtf8 to resolve
undefined symbols in Qt5Compat after moving QStringRef.
Task-number: QTBUG-84437
Change-Id: I9046dcb14ed520d8868a511d79da6e721e26f72b
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The string representation of std::pair<T1,T2> is now always
"std::pair<T1,T2>". This is in line with how we translate QPair,
avoiding typename mismatches that would previoulsy occur, because the
full name of pair on libc++ was "std::__1::pair".
Fixes: QTBUG-84924
Change-Id: Ia6c044a7327d69e4b4f4a31496c6b2408d85ebb9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Just like any other container, it's legitimate for the user to
pass key/values belonging to the same container.
Q(Multi)Map::remove(Key) are already safe (either they call
erase() directly on std::(multi)map, where it does the right thing,
or they skip elements while detaching).
However, QMultiMap::remove(Key, T) wasn't safe in this regard
(the implementation is hand rolled), so take copies before start
erasing.
Change-Id: I87767d608b83216a6ff264fb6c8f145fdb5934f8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Added functions that tell how much free space is available at the
beginning and at the end of the storage
Updated preconditions of operations to use freeSpace* functions
Also, changed casts uint(this->size) to size_t(this->size)
Task-number: QTBUG-84320
Change-Id: Iad94c1060a00f62068da9d1327e332a00d4f4109
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Refactored certain bits of qarraydataops.h: picked exception-related
building blocks and put them into one place, (somewhat) documented
the usage, added tests
Personally, the existing code seemed rather complicated to analyze
(and do mental experiments for corner cases), especially when staring
at the whole thing for a while or "returning back" from some other work
and I still have my doubts that everything works correctly. Testing the
building blocks that are used should:
a) increase trust into existing code (provided the usage is correct)
b) give more use cases of how to use the building blocks, which in turn
would allow to compare and contrast tests vs implementation
Task-number: QTBUG-84320
Change-Id: I313a1d1817577507fe07a5b9b7d2c90b0969b490
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Updated insert() methods:
* Refined Q_ASSERT() checks
* Fixed implementation issues (some of which resulted in
actual crashes)
* Allowed to insert at the end. This is safe as far as I can
tell and actually would allow to simplify considerable chunks
of code (mainly, copyAppend versions to just return
insert at the end)
Updated tests accordingly
Change-Id: I0ba33ae5034ce8d5ff95b753894e95d71ba00257
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Extended existing tests with QArrayData's allocation options
Added extra tests on array operations covering append, insert,
emplace, erase and truncate. "Raw" QArrayDataPointer is used instead of
test-specific SimpleVector to check the behavior without some custom
logic in-between
The change targets future updates to array operations in the light of
prepend optimization: as the array operations would become more complex,
these tests should give a much better coverage (specifically due to
likely non-trivial implementation details and optimizations)
Task-number: QTBUG-84320
Change-Id: I6581e2cb48f81b82ee5052d1dcea3da2819df47a
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Check that we can successfully instantiate the data
stream operator for a container before we actually try.
This is required so we can automate registration of debug
stream operators with QMetaType.
Change-Id: Ib100a5242470d7fc8067058cc4d81af2fa9354b0
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Check that we can successfully instantiate the debug
stream operator for a container before we actually try.
This is required so we can automate registration of debug
stream operators with QMetaType.
Change-Id: I3943e7a443751d250c33b2ca1b9cf29207cfe6c4
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
It was marked internal anyway. Use the constructor taking a
QMetaType instead.
Change-Id: I15b9cd0911aac063a0f0fe0352fa2c84b7f7c691
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Both normal and relaxed constexpr are required by our new minimum of
C++17.
Change-Id: Ic028b88a2e7a6cb7d5925f3133b9d54859a81744
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
A few new files were added with old-school defines.
Change-Id: Ieb2c71e094e55102f3f39fb9551823f36863f5f4
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
After reimplementing Qt JSON support on top of CBOR, there were
unintended behavior changes when converting QVariant{, List, Map} to
QJson{Value, Array, List} due to reusing the code for converting
QVariant* types to CBOR types, and from CBOR types to corresponding JSON
types. In particular, conversions from QVariant containing QByteArray to
JSON has been affected: according to RFC 7049, when converting from
CBOR to JSON, raw byte array data must be encoded in base64url when
converting to a JSON string. As a result QVariant* types containing
QByteArray data ended up base64url-encoded when converted to JSON,
instead of converting using QString::fromUtf8() as before.
There were also differences when converting QRegularExpression.
Reverted the behavior changes by adding a flag to internal methods for
converting CBOR to JSON, to distinguish whether the conversion is done
from QVariant* or CBOR types. These methods now will fall back to the old
behavior, if the conversion is done using QJson*::fromVariant*().
Additionally fixed QJsonValue::fromVariant conversion for NaN and
infinities: they should always convert to QJsonValue::Null. This works
correctly when converting from variant to QJsonArray/QJsonObject, but has
been wrong for QJsonValue.
Added more tests to verify the expected behavior.
[ChangeLog][Important Behavior Changes] Restored pre-5.15.0 behavior
when converting from QVariant* to QJson* types. Unforeseen consequences
of changes in 5.15.0 caused QByteArray data to be base64url-encoded; the
handling of QRegularExpression was also unintentionally changed. These
conversions are now reverted to the prior behavior. Additionally fixed
QJsonValue::fromVariant conversions for NaN and infinities: they should
always convert to QJsonValue::Null.
Fixes: QTBUG-84739
Change-Id: Iaee667d00e5363906eedbb67948b7b39c9d0bc78
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
isNull() would forward to the contained type and check that type's
isNull() method for some of the builtin types. Remove that behavior
and only return true in isNull(), if the variant is invalid, doesn't
contain data or contains a null pointer.
In addition, implement more consistent behavior when constructing
a QVariant using the internal API taking a copy from a void *.
isNull() should return true in both cases. This mainly changes behavior
for some corner cases and when using our internal API.
[ChangeLog][Important Behavior Changes] QVariant::isNull()
no longer returns true when the variant contains an object of some
type with an isNull() method, that returns true for the object;
QVariant::isNull() now only returns true when the variant contains
no object or a null pointer.
Change-Id: I3125041c4f8f8618a04aa375aa0a56b19c02dcf5
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Comparing two variants will not try to convert the types
of the variant anymore. Exceptions are when both types are
numeric types or one type is numeric and the other one a
QString. The exceptions are there to keep compatibility with
C++ and to not completely break QSettings (which needs automatic
conversions from QString to numeric types).
[ChangeLog][Important Behavior Changes] Comparing two
variants in Qt 6 will not try attempt any type conversions before
comparing the variants anymore. Instead variants of different type
will not compare equal, with two exceptions: If both types are numeric
types they will get compared according to C++ type promotion rules. If
one type is a QString and the other type a numeric type, a conversion
from the string to the numeric tpye will be attempted.
Fixes: QTBUG-84636
Change-Id: I0cdd0b7259a525a41679fb6761f1e37e1d5b257f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove the compare method in the QVariant::Handler struct. Rely
on the generic support provided by QMetaType instead.
[ChangeLog][Important Behavior Changes][QVariant] QVariant will now use builtin support in
QMetaType to compare its content. This implies a behavioral change
for some graphical types like QPixmap, QImage and QIcon that will
never compare equal in Qt 6 (as they do not have a comparison
operator).
Change-Id: I30a6e7116c89124d11ed9052537cecc23f78116e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Change-Id: Ibdc95e9af7bd456a94ecfffd16066c47ea9766d0
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][QtCore][QJsonDocument] Fixed a bug that caused
QJsonDocument's equality operator to crash if one of the operands was
default-constructed and the other wasn't.
Pick-to: 5.15
Fixes: QTBUG-85969
Change-Id: I5e00996d7f4b4a10bc98fffd1629f835f570ef6b
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Use the actual minimum value, rather than minus the maximum, and adapt
the overflow expectations so that they're correct west of Greenwich as
well as east.
Change-Id: I7a5f4510db0fdea3855b5b2bd4c4a86882030efd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Due to a limitation of mktime(), we would have declared it invalid.
Tidied up qt_mktime() slightly in the process.
Change-Id: I25469e314afee6e0394e564bc69a98883005d4ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Removed isCompressed(), deprecated since 5.15, and (since 5.13)
addSearchPath() and searchPath().
Change-Id: I4b6fb8077c02bbe322334e474eaf0a2a7caf0004
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QString's fromUtf16() prefers char16_t data over ushort.
Change-Id: Ib20c5afa09ceabb4e91fe434b6a057edb4739a53
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
mkspecs/features/qt.prf adds a dependency on the system threading
library if the Qt Core thread feature is enabled. Because qt.prf is
loaded by any public or internal Qt project, it's essentially a public
dependency for any Qt consumer.
To mimic that in CMake, we check if the thread feature is enabled, and
and set the Threads::Threads library as a dependency of Qt6::Platform,
which is a public target used by all Qt modules and plugins and Qt
consumers.
We also need to create a Qt6Dependencies.cmake file so we
find_package(Threads) every time find_package(Qt6) is called.
For the .prl files to be usable, we have to filter out some
CMake implementation specific directory separator tokens
'CMAKE_DIRECTORY_ID_SEP' aka '::@', which are added because we call
target_link_libraries() with a target created in a different scope
(I think).
As a result of this change, we shouldn't have to hardcode
Threads::Threads in other projects, because it's now a global public
dependency.
Task-number: QTBUG-85801
Task-number: QTBUG-85877
Change-Id: Ib5d662c43b28e63f7da49d3bd77d0ad751220b31
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Receiving an rvalue still requires to check whether the parameter
is detached, otherwise we can't steal its backing std::map.
Change-Id: Ie88dbf39fd777112ad7bb20a46d5c2d65be8eb3d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... and QMultiMap as std::multimap.
Just use the implementation from the STL; we can't really claim that
our code is much better than STL's, or does things any differently
(de facto they're both red-black trees).
Decouple QMultiMap from QMap, by making it NOT inherit from
QMap any longer. This completes the deprecation started in 5.15:
QMap now does not store duplicated keys any more.
Something to establish is where to put the
QExplictlySharedDataPointer replcement that is in there as an
ad-hoc solution. There's a number of patches in-flight by Marc
that try to introduce the same (or very similar) functionality.
Miscellanea changes to the Q(Multi)Map code itself:
* consistently use size_type instead of int;
* pass iterators by value;
* drop QT_STRICT_ITERATORS;
* iterators implictly convert to const_iterators, and APIs
take const_iterators;
* iterators are just bidirectional and not random access;
* added noexcept where it makes sense;
* "inline" dropped (churn);
* qMapLessThanKey dropped (undocumented, 0 hits in Qt, 1 hit in KDE);
* operator== on Q(Multi)Map requires operator== on the key type
(we're checking for equality, not equivalence!).
Very few breakages occur in qtbase.
[ChangeLog][Potentially Source-Incompatible Changes] QMap does not
support multiple equivalent keys any more. Any related functionality
has been removed from QMap, following the deprecation that happened
in Qt 5.15. Use QMultiMap for this use case.
[ChangeLog][Potentially Source-Incompatible Changes] QMap and
QMultiMap iterators random-access API have been removed. Note that
the iterators have always been just bidirectional; moving
an iterator by N positions can still be achieved using std::next
or std::advance, at the same cost as before (O(N)).
[ChangeLog][Potentially Source-Incompatible Changes] QMultiMap does
not inherit from QMap any more. Amongst other things, this means
that iterators on a QMultiMap now belong to the QMultiMap class
(and not to the QMap class); new Java iterators have been added.
Change-Id: I5a0fe9b020f92c21b37065a1defff783b5d2b7a9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Avoids the conversion from UTF-8 for uses that are not dumping a string.
Mass conversion of Qt sources left for future opportunity.
Fixes: QTBUG-85811
Change-Id: I4ca4a35b687b46c39030fffd1626ae6c3294cacf
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We can end up in a situation where a (soon to be destroyed) observer is
owned by a binding which is about to be deleted. If in that situation
the binding is destroyed first, we end up with a dangling pointer
and ensuing memory corruption. Instead, we now first transfer the
ownership of the observer and only destroy the binding afterwards.
Fixes: QTBUG-85824
Change-Id: I721c0319281ada981ae7896bd2e02e9a0cc901b8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Fixes warning by Clang:
warning: 'const volatile' type qualifiers on return type have no effect
[-Wignored-qualifiers]
const volatile unsigned long long * const volatile func_KVPKVull() {...}
^~~~~~~~~~~~~~~
Change-Id: Ia4aae6521c84f4a18d92ad5035af5b247d283140
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Made QPromise::swap public, added free standing swap() for
QFutureInterface and QPromise. Updated QPromise special member
functions. Extended tests
Task-number: QTBUG-84977
Change-Id: I5daf6876df306d082441dbcdf5ae4dee3bfc0ead
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
We already had append(const QList &) and now there's an overload
taking an rvalue reference.
Change-Id: Id2fbc6c57badebebeee7b80d15bb333270fa4e19
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I don't know why std::shared_ptr allows this, but why not.
[ChangeLog][Important Behavior Changes] QSharedPointer objects will now
call custom deleters even when the pointer being tracked was null. This
behavior is the same as std::shared_ptr.
Fixes: QTBUG-85285
Pick-to: 5.15
Change-Id: I24006db8360041f598c5fffd161c260df0313b55
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
‘t’
Specifies that the argument is a ‘ptrdiff_t’.
This modifier was introduced in ISO C99.
We use qsizetype, which is the same width as ptrdiff_t, so it makes no
difference in va_arg().
Change-Id: Iea47e0f8fc8b40378df7fffd16255730109413a5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Deprecated in 5.15 in favor of CBOR.
Fixes: QTBUG-81239
Change-Id: I711d4bd7dd1247f58e77ac9fa53304cbe5028918
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Our hardware optimized conversions of float to qfloat16 rounds to even
where our table based conversion truncated to zero.
The rounding is not in this patch exactly round to even like the
hardware implementation but much closer.
Change-Id: I4c5e72c15fef9079d3660680b2727ff7ba4e768a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
BLAKE2 does not specify requirements about specific hash sizes and
since QCryptographicHash does not support dynamic hash sizes, only the
most common hash sizes could be covered by this.
The supported hash sizes were chosen to match the ones supported by the
Linux kernel.
The new hashing algorithms for QCryptographicHash are:
* BLAKE2b (160 bit, 256 bit, 384 bit, 512 bit)
* BLAKE2s (128 bit, 160 bit, 224 bit, 256 bit)
[ChangeLog][QtCore][QCryptographicHash] Added BLAKE2b and BLAKE2s
hashing algorithms.
Fixes: QTBUG-78198
Change-Id: Id9e0180a974093982fdf1cdd6180988a2e5e9f4f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We already have the information in the QMetaTypeInterface, and provide
functions to access sizeof. Adding alignof support seems natural, and
should make it easier to handle over-aligned types.
This should also be helpful in QVariant.
Change-Id: I166be76f4b7d2d2e524a3a1e513bd2f361e887c1
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The tests are testing deprecated functionality, which we
still want to test.
Change-Id: Iad6ed35800896170c17fe019c7a6ecda22398ac3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Infinite is only when the mantissa is 0, everything else is NaN.
std::isnormal returns false on zero.
Pick-to: 5.15
Change-Id: I897fc0dc3b8a9c557bb1922ea7ca8df501e91859
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since 5.14: intersect(), angle(). Also removed definition of M_2PI
from test, since its last use was in the tests being removed.
Change-Id: Ie3a12247e3760e8bfdd3a659cd06245c86b198c2
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
QUrl::fromEncodedComponent_helper() only existed to support some old
methods deprecated since 5.0, that I recently removed.
It was the only caller of qt_urlRecodeByteArray() aside from that
function's own autotest.
Both were private.
Task-number: QTBUG-85700
Change-Id: I5d09fd44e768847ce51a1ae7043150922cb5314c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
warning: comparison of integers of different signs: 'qsizetype' (aka 'long long') and 'unsigned long'
Change-Id: I03acb1f7aed782169a0a42cd8afc84b85991cd1e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
warning: format specifies type 'int' but the argument has type 'qsizetype' (aka 'long long')
Change-Id: I6099b53efecea46d191d5dc019c986f99e49c1f1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Deprecated since 5.0. Renamed a function in a manual test that no
longer needs to say it's Qt5-specific.
Change-Id: I6f2159c702f389d378a0e4d86bd4fe633298b100
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
The -arch_blank argument to lipo is no longer supported.
Pick-to: 5.15
Pick-to: 5.12
Change-Id: I47efcb3633f23b7a18d66211bc16d5c9dbc067c8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since 5.8: setHidden(), isHidden()
Part of the QCommandLineParser test also used setHidden().
Change-Id: I05a1c63ff3beb1167ed75632c1b71d7fff17f09e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Since 5.0: QUrl's image of the QUrlQuery API
Remove deprecation-suppression from tst_qurl.cpp, too.
Change-Id: Ide826283cb4e177fb34fb4080502f5a4620bd5d7
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Since 5.3 joining() and old Joining type
Replaced by JoiningType joiningType()
Change-Id: Iefee50aaf94cec6d67b5fc004b3e68357b2015c5
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
This only arises when the system locale tells us to use its zero as
our zero digit, since no CLDR locale uses it by default. Adapt an
MS-specific QLocale::system() test to use Suzhou numbering, so as to
test this.
While updating the locale-restoration code to also restore the digits
being set in that test, add restore code for the long time format,
where previously only the short time format was restored. Add a
comment to make it less likely one of those shall be missed in future.
Fixes: QTBUG-85409
Change-Id: I343324bb563ee0e455dfe77d4825bf8c3082ca30
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QEasingCurve has a richer variety of curves and curveShape was already
implemented by changing the easingCurve property.
[ChangeLog][QtCore][QTimeLine] Deprecated QTimeLine's curveShape
property in favor of the easingCurve property.
Pick-to: 5.15
Change-Id: I7261c0f24d7e02bc94624f0b74d699df62de1a52
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
For types that don't have an operator==(), always trigger the binding
and the changed notification.
Task-number: QTBUG-85578
Change-Id: I41374f6d13c88106f4de83864e82172f3a248150
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Smart pointers like QSharedPointer<T> do have a value_type, but their
equality does not depend on T being comparable. Therefore, instead of
simply checking for T::value_type, test for a few other container
requirements.
This also required to add an additional check for std::optional, as that
one has an unconstrained operator== on MSVC.
Change-Id: Iefd048f7aa360f4713ecd79f80acd7dae72ee18c
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Read three more values from CLDR and add a byte to the bit-fields at
the end of QLocaleData, indicating the three group sizes. This adds
three new parameters to various low-level formatting functions. At the
same time, rename ThousandsGroup to GroupDigits, more faithfully
expressing what this (internal) option means.
This replaces commit 27d1391280 with a
fuller implementation that handles digit-grouping in any of the ways
that CLDR supports. The formerly "Indian" formatting now also applies
to at least some locales for Bangladesh, Bhutan and Sri Lanka.
Fixed Costa Rica currency formatting test that wrongly put a separator
after the first digit; the locale (in common with several Spanish
locales) requires at least two digits before the first separator.
[ChangeLog][QtCore][Important Behavior Changes] Some locales require
more than one digit before the first grouping separator; others use
group sizes other than three. The latter was partially supported (only
for India) at 5.15 but is now systematically supported; the former is
now also supported.
Task-number: QTBUG-24301
Fixes: QTBUG-81050
Change-Id: I4ea4e331f3254d1f34801cddf51f3c65d3815573
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
During review of a refactor (coming shortly), Thiago wondered what the
magic numbers were. On closer examination, I concluded that they were
wrong and wrote some tests to prove it. This commit adds those tests;
replaces the misguided old code with something that passes them; and
documents the reasons for the various parts of its decisions.
In the process, tidy up QLocaleData::doubleToString() somewhat and
rename some of its variables to conform to Qt coding style.
Change-Id: Ibee43659b1bdb0707639cdb444cfe941c31d409f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use aggregation instead. Prepare for using QPromise instead of QFutureInterface.
Task-number: QTBUG-84702
Change-Id: Ic88564dca8c83a178a281cb843032292210a6d25
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Given we optimize for the case where the new value is of the
same type of the one already stored in the variant, enable move
assignment for that case.
As a drive-by, avoid a path to detach() for data() if we know
we're detached.
Change-Id: I9abbdc10637ce77ebb747b49d83e1ef914d997bb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
And mark some methods as inline.
Performance is critical for our new property system. Compiling
it in one unit makes it possible for the compiler to do a much
better job at inlining and generating optimized code.
Improves performance of binding evaluations by another 20%.
Change-Id: I5a2aa93c74d2b68418b0a9d2e34d8199bb71e3ad
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Avoid any QVariant or type dependent code in the cpp files.
Instead, let the binding wrapper determine if the value
has changed and return true/false accordingly.
This required also some reworking of the guard mechanism
for notified properties, where the guard function wrapper
now calls first the binding evaluation function and then
passes the result to the guard.
Change-Id: I350d07a508ccc0c5db7054a0efa4f270b6a78ec3
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
There's no point in returning a usually empty error when
evaluating bindings, adding overhead to the regular code
path.
Instead, the error can be set on the currently evaluating
binding if required. This streamlines the functor used to
wrap the binding and should thus expand to less code and
execute faster in the regular case.
To achieve this, expose a pointer to the currently evaluating
binding in the private API (as QtQml needs it to be able to
report errors).
The error case now requires one additional TLS lookup, but
we don't really care about performance in that case anyway.
Change-Id: Iecb450e765244930a41d813fcf8eb4013957a6a3
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Remove location(). The method would always return an empty value. If you need the location,
the binding itself has it.
Remove setDescription() and require that the description gets passed
in the constructor. Never create a d pointer if type is NoError, so we
can quickly check for it inline.
Change-Id: I7eb8a94786281069d6ea2d82567c09aa50c52ef6
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The issue has been introduced when refactoring QByteArray::count
implementation (see 631127126c).
Because the last argument of QByteArrayMatcher::indexIn() method
has a defult value, it has been compiling without issues, but was being
called with incorrect size parameter. Fixed it to pass the length of the
input data correctly.
Change-Id: Ic9c2f33733131ec17276aa889f2d7ea40ec79b01
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
And generate a few more test projects that were missing.
Change-Id: I5df51106549aa5ae09bc3c42360e14b143719547
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Use pro2cmake with '--api-version 2' to force regenerate
projects to use the new prefixed qt_foo APIs.
Change-Id: I055c4837860319e93aaa6b09d646dda4fc2a4069
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
