QSslCertificate::verify() has an undocumented and not very desirable property -
on some platorms it updates the default configuration, which can be surprising.
For example, we deprecated QSslSocket::setDefaultCaCertificates() and recommend
using QSslConfiguration::defaultConfiguration(), QSslConfiguration::setDefaultConfiguration(),
and QSslConfiguration::setCaCertificates(). If an application does this to select
CA roots it trusts explicitly, and then for some reason is calling verify, the
application can have its QSslSockets successfully connecting to a host, whose
root was not trusted by the application. Also, on Windows, defaultCaCertificates()
include system roots already, no need to have them twice.
[ChangeLog][QtCore][QtNetwork] QSslSocket::verify - do not change the default configuration
Pick-to: 5.15
Pick-to: 6.0
Pick-to: 6.0.0
Fixes: QTBUG-88639
Change-Id: I1cd40b259d0a6dcd15c78d1e7c027ff10859595c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
And extend an auto-test for this. When a cookie verification mechanism is
enabled, and verifier, indeed, verifies that some datagram is a 'Client Hello'
message with a proper cookie attached, we start a real DTLS handshake creating a
QDtls object and calling 'doHandshake'. In case cookie verification
was enabled, we need parameters from the verifier (it's a crypto-strong
'number' and hash algorithm) to 'lock and load' the TLS state machine in
a freshly created TLS session object. This code path previously was only
tested manually and was found by LCOV as untested.
Pick-to: 5.15
Pick-to: 6.0
Change-Id: Ieacb8c989997999ea10e15bda6ae106a0338b698
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
And do not run the test with QSslSocket::supportsSsl() returns false -
this may mean unresolved symbols and thus missing functionality,
like i2d_X509 etc. This also makes cases more like other, that already
had those checks.
Fixes: QTBUG-87386
Change-Id: If4e9a650ca325b6f70956f532891a4c1d50465c0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Some code-paths were never executed by auto-test, thus giving us LCOV's
diagnostic. Extend existing tests and add new ones.
Pick-to: 5.15
Change-Id: I648747547f0525a482216b1e1972fcc698c73f65
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
By extending (a bit) an auto-test to cover paths found by LCOV. All of them
is just to trigger the code that checks input parameters.
Pick-to: 5.15
Pick-to: 6.0
Change-Id: I62f9a9045038ff8d123fd1396f4bfd85e75c6d8f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
By adding auto-tests that were missing/not triggering the paths found
by LCOV.
Pick-to: 5.15
Pick-to: 6.0
Change-Id: I472f59e8e7292786c80d7c8dcebde53a2982e1ec
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
By simply extending the basic test to trigger qHash, isEqual and
a bunch of getters.
Pick-to: 6.0
Pick-to: 5.15
Change-Id: Ib1d88fc6d2ad623743cea77ac286ae6ac819dfd1
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
tst_qsslcipher was quite useless - now we test that default constructed
QSslCipher reports expected values. Test the non-default from the
different auto-test, where we are sure we have really useful
ciphersuites (with different parameters obtained from a TLS backend,
where it's possible).
Pick-to: 6.0
Pick-to: 5.15
Change-Id: Iff14a0580fed889cf9e0873bee01d968773626db
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
... instead of failing the test. On Ubuntu 20.04 when calling
'connect' with 0.0.0.1 we get EINPROGRESS and nothing else,
since our own internal timer has 30 s. timeout, the event loop
in the test stops before this and no socket error detected yet.
Handle such situation without failing a test.
Fixes: QTBUG-88042
Change-Id: Id6add27fcf9bbbe5fbf83a193652edf08fbad8d6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This reverts commit ee122077b0.
Reason for revert: This causes QProcess::readAll() to sometimes
return nothing after the process has ended.
Fixes: QTBUG-88624
Change-Id: I34fa27ae7fb38cc7c3a1e8eb2fdae2a5775584c2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
(cherry picked from commit 23100ee61e33680d20f934dcbc96b57e8da29bf9)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
When a foreign event loop that does not enter an alertable wait state
is running (which is also the case when a native dialog window is
modal), pipe handlers would freeze temporarily due to their APC
callbacks not being invoked.
We address this problem by moving the I/O callbacks to the Windows
thread pool, and only posting completion events to the main loop
from there. That makes the actual I/O completely independent from
any main loop, while the signal delivery works also with foreign
loops (because Qt event delivery uses Windows messages, which foreign
loops typically handle correctly).
As a nice side effect, performance (and in particular scalability)
is improved.
Several other approaches have been tried:
1) Using QWinEventNotifier was about a quarter slower and scaled much
worse. Additionally, it also required a rather egregious hack to
handle the (pathological) case of a single thread talking to both
ends of a QLocalSocket synchronously.
2) Queuing APCs from the thread pool to the main thread and also
posting wake-up events to its event loop, and handling I/O on the
main thread; this performed roughly like this solution , but scaled
half as well, and the separate wake-up path was still deemed hacky.
3) Only posting wake-up events to the main thread from the thread pool,
and still handling I/O on the main thread; this still performed
comparably to 2), and the pathological case was not handled at all.
4) Using this approach for reads and that of 3) for writes was slightly
faster with big amounts of data, but scaled slightly worse, and the
diverging implementations were deemed not desirable.
Fixes: QTBUG-64443
Change-Id: I1cd87c07db39f3b46a2683ce236d7eb67b5be549
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
The test authenticationCacheAfterCancel was the only one to fail
in recent COIN runs. This patch blacklists it on Ubuntu 20.04.
Task-number: QTBUG-88417
Change-Id: Idc85499da82336d291d9a90ecb941810a0e6c935
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The recent change handling missing elliptic curves introduced a problem
for '-no-ssl' configuration/build. The first version had some protection,
but it was openssl-specific and required a private feature, thus was
removed. Now the real ifdef must be with QT_NO_SSL
Fixes: QTBUG-88238
Pick-to: 5.15
Change-Id: I6fba26d6ab63850e1468e76f8b234703255a026c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The former *.platform.sh entry has been replaced by more specific
entries, replacing the wildcard with only selected second levels.
Task-number: QTBUG-87925
Change-Id: Ie4ba7c66ba9aa40eafe23f02faa12f19d791cff2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We want to re-enable Android tests in QTQAINFRA-3867. However,
many tests are failing already preventing that from happening.
QTBUG-87025 is currently keeping track (links) to all of those
failing tests.
The current proposal is to hide those failing tests, and enable
Android test running in COIN for other tests. After, that try
to fix them one by one, and at the same time we can make sure
no more failing tests go unnoticed.
Task-number: QTBUG-87025
Change-Id: Ic1fe9fdd167cbcfd99efce9a09c69c344a36bbe4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Ubuntu changed the default level from 1 to 2 and not accepting our
RSA 1024 anymore. While we are not testing the TLS library's strength,
we re-generate a ceritficiate to shut the thing (the botched, 'fixed' OpenSSL)
up for good.
Task-number: QTBUG-86187
Change-Id: I6151ce5210972ae938e52731157742910363afbe
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Move it to the section requiring SSL tests since it
requires QSslConfiguration.
Change-Id: I5c807976ce75fa5967bddb8edd7788dbfbb89375
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It's been obsolete for a long time already. Make sure
the compiler now warns about it and remove all remaining
uses in qtbase.
Change-Id: I0ff80311184dba52d2ba5f4e2fabe0d47fdc59d7
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Interesting, it only exploded now - initially we were too fast (faster than
500 ms) so never noticed. Now that more tests with the similar event loop
handling were introduced, the last one was catching a single-shot timer
signal, accessing long dead object).
Fixes: QTBUG-87612
Change-Id: I52446fa7b08ef90a4742af3662da7837a8602941
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
When a peer closes the connection, the device remains opened for reading
purposes. However, we should disable writing on disconnected socket.
Otherwise, if the user issues a write() call, a new pipe writer object
will be created and the write call occurs with invalid handle value.
Pick-to: 5.15
Change-Id: Id136798c7663df1fce7ed0aa4e3c6f5c65218a11
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
It's not possible to connect to microsoft.com with Schannel TLS 1.3 for
some reason (also tested with Internet Explorer), but other sites work
fine. Must be something they have to iron out for later.
In my experience this needs a preview release of Windows. One of my
machines is opted into the dev channel of Windows where they enabled TLS
1.3 by default, and it works well in my tests except for the part above.
On my other machine, after enabling TLS 1.3 through the registry, I fail
to complete the handshake with any site. So around March/April next year
is when this code would activate for most people.
MinGW apparently defines NTDDI_VERSION as the one for Windows Server
2003, so it currently doesn't build the new TLS 1.3 code. In Qt (as a
project) we could consider setting this higher, but that's out of scope
for this patch!
Fixes: QTBUG-81294
Change-Id: If329959c3a30ecbfbb8c0d335cc39ccb6d012890
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
As suggested by the message from QTestLib. This, indeed, fixed the
sadistic test. Also, make sure resources are not leaked.
Pick-to: 5.15
Fixes: QTBUG-87009
Change-Id: Id693a5a562ea5ebacc853e5fc0ab9654ba851e72
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This time based on grepping to also include documentation, tests and
examples previously missed by the automatic tool.
Change-Id: Ied1703f4bcc470fbc275f759ed5b7c588a5c4e9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
To avoid potential decompression bombs. This is implemented with just
a simple check that the ratio doesn't pass some hardcoded preset.
Change-Id: I17246f0f43e73280cdb35a8f03d65885f5678ad6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Clean up the state of the projects,
before changing the internal CMake API function names.
Task-number: QTBUG-86815
Change-Id: I90f1b21b8ae4439a4a293872c3bb728dab44a50d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
qt_add_test supports now QT_TEST_SERVER_LIST, which will add the test
servers as docker test fixtures.
The docker server will be started before the test is run, and stopped
after the test is run.
Running the tests in parallel is not supported.
Docker tests are currently only supported on Linux hosts.
Task-number: QTBUG-85034
Change-Id: If3cefe05c5dec19c14b05d2fa8b01a0b6d95e259
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Certain servers, like smtp.live.com, will send a request for a
certificate even though they don't require one. In Schannel this
manifests as a warning/info status (SEC_I_INCOMPLETE_CREDENTIALS).
In the cases where it's not needed we should suppress the warning and
try to connect anyway, which is done by calling
InitializeSecurityContext again when we get the status.
Pick-to: 5.15
Change-Id: I3c48140f2949d8557251a49a2b66946da9395736
Reviewed-by: Joshua GPBeta <studiocghibli@gmail.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
CentOS it seems not only backported some OpenSSL 3 functions,
but also raised the default security level to 2, making some of
our keys (and MDs?) 'too weak' and failing auto-tests here and
there as a result. For our auto-test we lower the level to 1,
as it is expected to be.
Fixes: QTBUG-86336
Pick-to: 5.15
Change-Id: I7062a1b292e8b60eb9c2b2e82bd002f09f9da603
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
AFAICT with GSSAPI the normal workflow is to run kinit or similar and
authenticate before running programs relying on it. Therefore
we can try to get the credentials before we choose whether or not
to use Negotiate.
Pick-to: 5.15
Task-number: QTBUG-85123
Change-Id: If0478fdd45389b2939ad87c2f582776fe56959bb
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Our authentication code is race-y by design:
1. When two requests are fired off and queued at the same time in the
same QHttpNetworkConnection then if one of them encounters
"authentication required" then it will copy whatever credentials it got
to all the other channels in the connection. This is likely what the
first part of the test is testing.
2. If a later request is fired off and it includes credentials in the
url then the newly included credentials should be used instead of the
cached ones.
The race here can occurr when one socket either takes too long to
connect or the connected signal is not received early enough. Then the
first socket is used for both requests and then we can hit case #2 when
the url contains credentials.
Pick-to: 5.15
Change-Id: I646a5378d8c1256b2de98b51912953df29f68cb2
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Remove around 1000 compiler warnings about missing overrides
in our auto tests.
This significantly reduce the compiler warning noise in our auto
tests, so that one can actually better see the real problems
inbetween.
Change-Id: Id0c04dba43fcaf55d8cd2b5c6697358857c31bf9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It's not guaranteed that all curves we want to use are supported
by a specific build of OpenSSL library we have to link with. Filter
out files that contain EC, which is not among the curves, reported
by QSslConfiguration::supportedEllipticCurves.
Fixes: QTBUG-46203
Pick-to: 5.15
Change-Id: I70d7e6fcacb3d81f8c771e4a8d6cca06295e7474
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
While we initially wanted to just disable the functionality the way it
is currently built forces people to do a full build of Qt just to enable
it. Instead of doing this half-measure let's just remove the code
completely from QtBase and rather prepare QtNetwork to handle being a
plugin that can be compiled at any time.
Task-number: QTBUG-80340
Change-Id: I19155c8c167cf932088f01b2a9706d0e7ab792d1
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
It wouldn't grab the cached entry since it was not deemed
"fresh" (and would never be fresh because we didn't know when it
originated from or when it expired). But the test still passed because
the reply produced a "finished" signal which ended the loop, but the
"finished" signal was due to an error which was unchecked.
Change-Id: I6ad271aa621bdb4a48b74bc8fd64c7e2caa8f179
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
And put a note about it in the documentation
Change-Id: I29126e4a80f83c256190e03b8fe01f3c869fd46d
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
HTTP/2 is only used initially before it transitions to using HTTP/1.1,
and in this case the amount of connections established should also
reach 6.
Change-Id: I300e171e46c846df1730c07469ea85a51cecfb63
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
