The function was only well defined from RGB32 and ARGB32PM formats,
this patch fixes it so it behaves well from all formats.
Task-number: QTBUG-63163
Change-Id: Id892531d9aaf997b707b430196c1166493792a2a
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Looks like whoever created the blacklist never tried to figure out why
it happened.
Change-Id: I84e45059a888497fb55ffffd14d2fb29e32a4521
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The issue itself is not really worth fixing (the very first request
being supposed to have a different proxy than any of the other
following requests before a session has been initiated), but we can
at least make the test pass when it is run alone.
Task-number: QTBUG-63134
Change-Id: I6c7df5c5653541031811e6bff562572061afae0f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Performance is more important in this case than the theoretical benefit
of constexpr. This commit implements the SSE2 search for 16-bit null and
it might be possible to implement the equivalent for AArch64
(investigation required). It also adds a fallback to wcslen() for
systems where wchar_t is short (non-x86 Windows or 32-bit x86 build with
-no-sse2).
We can re-add the constexpr loop once the C++ language has a way of
overloading constexpr and non-constexpr. GCC has a non-standard way to
do that with __builtin_constant_p, which is also implemented in this
commit, but note that the inline function is still not constexpr.
Change-Id: I6e9274c1e7444ad48c81fffd14dcaacafda5ebdc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QMacAutoReleasePool is backed by an NSAutoreleasePool, which documents that
"you should always drain an autorelease pool in the same context (invocation
of a method or function, or body of a loop) that it was created".
This means allocating QMacAutoReleasePool on the heap is not a supported
use-case, but unfortunately we can't detect it on construction time.
Instead we detect whether or not the associated NSAutoreleasePool has been
drained, and prevent a double-drain of the pool.
Change-Id: Ifd7380a06152e9e742d2e199476ed3adab326d9c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Tests should not use QCursor to emulate mouse move, see QCursor::setPos() docs.
The flakiness of the test on XCB is not surprising when the test queries geometry
even before the window has been shown. With the re-factored version I could not
reproduce flakiness anymore.
Removed Q_OS_MAC and closed QTBUG-26274 as test passes on macOS from which I
assume that the underlying issue has been fixed.
Removed Q_OS_QNX ifdef as test does not rely on QCursor anymore.
This patch also fixes the issues on minimal / offscreen platform plugins.
QCursor::setPos() is evil for auto test purposes.
Note:
We intentionally use QTest::mouseMove(QWindow *window, ..), not the QWidget overload.
The QWindow version gets routed through QWSI, which ensures that all necessary events
are generated as expect. In QWidget code path this is currently disabled by
QTEST_QPA_MOUSE_HANDLING.
Change-Id: I285c26cff09e3f2750f8c2abbb1f46c8f7be984a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Speeds up the test from approximately 770ms to 180ms.
Change-Id: I2e5479fd5190b841b44d4a66380d27b1c3b55162
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The sources were already added conditionally in the project file since
179fe5981f.
Change-Id: I0baaec2e772f3e596d311c1973b9745aa2b80423
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
[ChangeLog][QtCore][QFileInfo] Relative symbolic links on Windows are
now resolved to their absolute path by symLinkTarget().
Task-number: QTBUG-62802
Change-Id: I5826517130bd389aef994bf3f4b6d99b2a91b409
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
They aren't used in the API, so let's stop wasting library size.
Change-Id: I6e9274c1e7444ad48c81fffd14db247ecf825a57
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Since MSVC doesn't have <chrono> (according to QT_HAS_INCLUDE), the QSKIP
in the test was printed for every line in the table. Instead, add the
skip in the _data() function.
Change-Id: I6e9274c1e7444ad48c81fffd14dbcee5e5a322aa
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
There's no need for us to walk our own ancestor chain to figure out which
cursor to set. AppKit will automatically call cursorUpdate: on the view
that would be the hitTest target of the current mouse position, and by
falling back to super when no cursor is set for the current view, we
automatically get the behavior that effectiveWindowCursor tried to solve.
In addition, it solves the case of applyEffectiveWindowCursor applying
the arrowCursor when no cursor was set, which would mean that if any
native parent view of our view _did_ have a cursor set, we would not
fall back to the native view's cursor, but instead override it with
the arrow cursor. Following the responder chain gives the correct
behavior in this case.
Unfortunately, due to rdar://34183708, if a subview of one of our
views uses the legacy cursorRect approach to cursor management, the
cursor will not be reset back to our cursor via cursorUpdate: when
leaving the child and entering the parent view (our view). Moving
our implementation over to the legacy API would solve this problem,
but just propagate it to native parent views of our views, which
could potentially use NSTrackingAreas, and would not have _their_
cursors re-set.
Change-Id: Id20cc03136f0b1d4b9120750fe63ddc455363aaf
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
- Add view to contentView, to allow checking parent view interaction
- Render via requestUpdate instead of manual timer
- Add two windows to check subview interaction
Change-Id: Ib028e62f585d45e42c0429e69ea6f45c8a90fe54
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
This reverts commit 8561281768.
This change needs to be reverted because Windows 10 Creator's
Update doesn't fail on this test anymore during CI runs.
Reason for this is unknown.
Change-Id: Ice250ecedb14ac96fb3693b2d9884ef452a91cc2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This reverts commit 3d5bf00f18.
This change needs to be reverted because Windows 10 Creator's
Update doesn't fail on this test anymore during CI runs.
Reason for this is unknown.
Change-Id: I9f1c88606c97afc5952af34e04310612b783a9c2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
nullptr can be used directly in the Qt code since Qt 5.7.
Use it in generated code for consistency.
Change-Id: I249aeaf0a39b46ce1106b29d3ea4569a399908b7
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
This was added in c6612de3 for WEC7 which we do not support anymore.
Change-Id: I329374bb8375d629a6f7619236371c0fc953792d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Without TLS (and thus ALPN/NPN negotiation) HTTP/2 requires
a protocol upgrade procedure, as described in RFC 7540, 3.2.
We start as HTTP/1.1 (and thus we create QHttpProtocolHandler first),
augmenting the headers we send with 'Upgrade: h2c'. In case
we receive HTTP/1.1 response with status code 101 ('Switching
Protocols'), we continue as HTTP/2 session, creating QHttp2ProtocolHandler
and pretending the first request we sent was HTTP/2 request
on a real HTTP/2 stream. If the first response is something different
from 101, we continue as HTTP/1.1. This change also required
auto-test update: our toy-server now has to respond to
the initial HTTP/1.1 request on a platform without ALPN/NPN.
As a bonus a subtle flakyness in 'goaway' auto-test went
away (well, it was fixed).
[ChangeLog][QtNetwork][HTTP/2] In case of clear text HTTP/2 we
now initiate a required protocol upgrade procedure instead of
'H2Direct' connection.
Task-number: QTBUG-61397
Change-Id: I573fa304fdaf661490159037dc47775d97c8ea5b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Consider the following:
/root/target - a file
/root/path/link -> ../target
/root/path/other/exe - executable
Running from /root/path/other.
exe is:
#include <QDebug>
#include <QFileInfo>
int main()
{
qDebug() << QFileInfo("../link").symLinkTarget()
return 0;
}
The link references /root/target, but the current output is
/root/path/target.
The link doesn't depend on the PWD. It depends on its own directory.
Change-Id: I61e95018154a75e0e0d795ee801068e18870a5df
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A macro name ending in R might expand to a string; if this precedes a
string constant, we're juxtaposing the strings. My first parser for
raw strings would mistake it for a raw string instead, ignoring the
part of the identifier before R. Re-worked the exploration of what
came before the string to catch these cases, too.
The backwards parsing would also allow any messy jumble of [RLUu8]* as
prefix for the string; but in fact R must (if present) be last in the
prefix and *it* can have at most one prefix, [LUu] or u8. Anything
else is an identifier that happens to precede the string. Reworked
the parsing to allow only one prefix and not treat R specially unless
it's immediately (modulo BSNL) before the string's open-quotes.
Add link to the cppreference page about string literals, on which the
grammar now parsed is based.
Added a test for the issue this addresses.
Verified that this fails on 5.6, dev and 5.9 without the fix.
Expanded the existing test to cover R-with-prefix cases.
Task-number: QTBUG-55633
Change-Id: I541486c2ec909cfb42050907c84bee83ead4a2f4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
When calling resize() from showEvent(), we'd set the full geometry
on the widget's QWindow. This resulted in the top-level window
being moved to the top-left corner, even though no other call to
move() or setGeometry() had happened before.
The solution consists on calling the proper QWindow methods depending
on whether setGeometry_sys() is called for a move, a resize or both.
Furthermore, this needs QWindow::resize() to set its position policy
to frame-exclusive. The documentation states that is already the case
and we're setting the full geometry on the platform window, so we need
to convey that bit of information.
This also solves the age-old conundrum: "### why do we have isMove as
a parameter?"
Change-Id: I2e00fd632929ade14b35ae5e6495ed1ab176d32f
Task-number: QTBUG-56277
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Speeds up testing by a factor of 2.
Task-number: QTBUG-61827
Change-Id: I9d6c9d9786d35af3083bc7e98beb9a79dbcc7e11
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Unsetting the SOFTWARE environment variable will force lpstat to use
English for the output, so we can ensure that the test will pass
regardless of the language used for the machine.
Change-Id: Iddf5e8aadaa546ae3e0dd172df84e4e43ee02c2a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Introduce helper function which uses a number to build
unique names. Remove helper for deleting files since it
now uses a temporary directory. Add a few cases
that were overlooked in 88c68f4d9e.
Task-number: QTBUG-61827
Change-Id: I53355f99ffc3bfe6ad6994a5439710c9fa8cdad5
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
That means a file is never created, unless you ask for the name. There's
no chance of left-over temporary files being left behind. QSaveFile also
benefits from this, since the save file is not present on disk until
commit(). Unfortunately, QSaveFile must go through a temporary name
because linkat(2) cannot overwrite -- we need rename(2) for that (for
now).
[ChangeLog][Important Behavior Changes][QTemporaryFile] On Linux,
QTemporaryFile will attempt to create unnamed temporary files. If that
succeeds, open() will return true but exists() will be false. If you
call fileName() or any function that calls it, QTemporaryFile will give
the file a name, so most applications will not see a difference.
Change-Id: I1eba2b016de74620bfc8fffd14cc843e5b0919d0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Has become flaky on CI. Does not fail locally.
Change-Id: I42938849571938db78b16a72c215442a69f7c2d5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This test sets up two timers:
- a 100ms recurring timer
- a series of 10 200ms single-shot timers.
After quitLock lets exec() return it then uses a signal
spy to check if the 100ms timer fired at least 17/20
of the times it should.
However there is no guarantee that the 100ms timer
will fire more often than the 200ms timer. If the
native timer callbacks happen at 500ms intervals then
Qt will fire both timers (once) at that interval.
In practice this seems to happen on macOS CI under
system load and/or with the test app napping.
The primary goal for the test is to verify that exec()
returns when it should; we can remove the timer signal
spy.
Remove testQuitLock from BLACKLIST.
Timely timer:
524429311.389913 runLoopTimerCallback
524429311.389979 200ms fire
524429311.389997 100ms fire
524429311.490056 runLoopTimerCallback
524429311.490130 100ms fire
524429311.589752 runLoopTimerCallback
524429311.589929 200ms fire
524429311.589976 100ms fire
Delayed timer:
524429428.690887 runLoopTimerCallback
524429428.691002 100ms fire
524429428.691143 200ms fire
524429433.692103 runLoopTimerCallback
524429433.692205 100ms fire
524429433.692331 200ms fire
Change-Id: Iff4faaa1de3741cf4e217949d5ed17d4e70c6af2
Task-number: QTBUG-61499
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Change c12072c685 fixed a problem
where tab labels would overlap with the icons if the tab became
too small to contain the text. But it did not properly account
for the full area occupied by the icon, because the horizontal
padding is hardcoded to 4 in the mac style, whereas in the
common style (where the icon is drawn) it uses the pixel metric
for this.
In addition, the change only allocated space on the left side,
causing the label to no longer be centered.
Task-number: QTBUG-61235
Change-Id: Ieec4f7044584361f92045addbc8bbd81bd5c9fc7
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
The only reason our code wants PKCS12 files is for a private key, but
a valid file needn't contain one; and reading a file without lead to a
crash in QSslKeyPrivate::fromEVP_PKEY(). So check for missing key and
fail the load, since the file is useless to us. Also ensure the
caller's pkey is initialized, as we aren't promised that
PKCS12_parse() will set it when there is no private key.
Add a test for this case (it crashes without the fix) and update the
instructions for how to generate test data to cover it also.
(Corrected the wording there, too; at the interactive prompt,
"providing no password" really provides an empty password.)
Task-number: QTBUG-62335
Change-Id: I617508b903f6d9dee40d539b7136b0be8bc2c747
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Although the window is refused input for the most part from the system,
it does not act like that it is blocked by the application modal dialog.
This ensures that it is the case and prevents things like being able to
double click on the title bar to maximize the window on Windows.
Task-number: QTBUG-49102
Change-Id: If1582819b90cb2ec9d891f664da24f13bfec7103
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Calling -[NSMenu update] every time we add a new item can result in
a quadratic behavior since the function itself will iterate over all
the items in the menu. We solve this by using a 0-timer which will
trigger the call to update the next time the event loop spins.
Menurama manual test updated.
Change-Id: Ic155d364515cc93eb81b1c8085c8e44c93799954
Task-number: QTBUG-62396
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Added binary compatibility files for Qt 5.9.0.
'QOpenGLExtraFunctionsPrivate::Functions' and
'QOpenGLExtraFunctionsPrivate' have been blacklisted in
qtqa/tests/postbuild/bic/tst_bic.cpp, because those give false
positive fail in the binary compatibility tests.
Change-Id: I2231daef61a0c4677af36c85575b8dcd81070d44
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QLineEdit with a mask does not return empty fields with the
ImSurroundingText query. This is a problem for the input
context that is not aware of the mask and relies on the
fact that the cursor position never exceeds the boundaries
of the surrounding text.
This change fixes the issue by returning unmasked text with
the ImSurroundingText query.
[ChangeLog][QtWidgets][QLineEdit] Fixed behavior of the
ImSurroundingText query. Previously, it returned a masked
text whose length may be less than the cursor position.
Now it returns unmasked text, so the text length is always
greater than or equal to the cursor position.
Task-number: QTBUG-60319
Change-Id: I1c8009164836a1baa2e3a45958bf1ea5fa9be38d
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
On BSD systems (tested on macOS and FreeBSD), you *can* lseek(2) or
ftell(3) on a pipe and get its current position. But QFile will not get
the position when the file is sequential, so we need to return 0.
Technically speaking, we ought to do the same for block devices, but if
you're redirecting stdin, stdout or stderr in the unit test to or from a
block device, you deserve the extra work to add that yourself to the
test.
Change-Id: I3868166e5efc45538544fffd14d8a74e92963fe7
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
If a QFileInfo was constructed with an empty path, which could happen
with QFileInfo(QFile()) or via QDir, etc., then it would issue system
calls to empty paths and could even produce warnings. This commit makes
am empty path name be the same as a default-constructed QFileInfo and
corrects the use if 0 for ownerId and groupId to match the
documentation.
[ChangeLog][Important Behavior Changes] QFileInfo on empty strings now
behaves like the default-constructed QFileInfo. Notably, path() will now
be the empty string too, instead of ".", which means absoluteFilePath()
is no longer the current working directory.
Change-Id: I8d96dea9955d4c749b99fffd14ce34968b1d9bbf
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Conflicts:
src/widgets/kernel/qwidget.cpp
This merge also extends the expected output of the pairdiagnostics
teamcity output (added in dev in commit
c608ffc56a) after the recent addition of
the flowId attribute to the teamcity output (commit
8f03656211 in 5.9).
Change-Id: I3868166e5efc45538544fffd14d8aba438f9173c
The test verifies that a cookie with a date in the future is not
"expired" and will be sent to the server. This test started failing
on August 7th 2017 when the test case "0003" with it's cookie expiring
August 7th 2017 started ... expiring ;-)
Bumped all suspicious cookie test cases by a hundred years.
Change-Id: I7c09069ec4999e2ea0aae7b2a2819cced0fd6a99
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The blacklisting is not needed anymore as we now use -qt-harfbuzz.
This reverts commit b36e5faad4.
Task-number: QTQAINFRA-1363
Change-Id: I3ae50588204b27e6880416ae2cbc28dda53bb292
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
It was working on Linux because _GNU_SOURCE gets us POSIX.1-2008
compatibility, but not on macOS or the BSDs. There, we were still stuck
to full second precision.
This commit uses the template trick introduced by the futimes code
(which itself was inspired by commit 2fb42eb4af
in QtNetwork). Also note how it adds support for birth time, if the
system's stat struct has that information.
Tested to work on MacOS and FreeBSD. The manual filetest produces:
Name: .
Path: . (/usr/home/tjmaciei/src/qt/qt5)
Size: 1536 Type: Directory
Attrs: readable writable executable hidden nativepath
Mode: drwxr-xr-x
Owner: tjmaciei (1001) Group: tjmaciei (1001)
Access: 2017-07-13T20:03:47.916
Birth: 2017-07-13T20:03:47.916
Change: 2017-07-13T20:04:41.648
Modified: 2017-07-13T20:04:41.648
Linux will require support for statx(2).
Change-Id: I8d96dea9955d4c749b99fffd14cd97d7a8c6d45d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
In Qt, we have QTextOption::tabStop, QTextEdit::tabStopWidth and
QPlainTextEdit::tabStopWidth.
Neither are very good names, since the tab stop is neither a
numerical value as in the former, nor does it have any dimensions
that can be measured, as in the latter. Vertical text advances
may also be supported by Qt at some point in the future, at
which point the name would make even less sense.
At the same time, we expose the actual type of the tab stop
distance as floating point in the QTextEdit and QPlainTextEdit
API instead of always rounding it to an int.
To avoid duplicating either of these APIs in Qt Quick, we
introduce tabStopDistance as the common term instead and deprecate
the old names.
[ChangeLog][Text] Introduced tabStopDistance property in
QTextOption, QTextEdit and QPlainTextEdit as replacement for
the inconsistently named tabStop and tabStopWidth properties.
QTextOption::tabStop, QTextEdit::tabStopWidth and
QPlainTextEdit::tabStopWidth have subsequently been deprecated.
Change-Id: Ib7e01387910cddb58adaaaadcd56c0e69edc4bc2
Reviewed-by: Paolo Angelelli <paolo.angelelli@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The Unix stat fields "st_ctime" and "st_ctim" mean "change time", the
last time that the file/inode status fields were changed. It does not
mean "creation time". So this commit splits all of the internal API to
"birth" and "metadata change" instead of "creation" to avoid the
conflict.
Change-Id: I149e0540c00745fe8119fffd1463fe78b619649e
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
[ChangeLog][QtCore][QFileInfo] Deprecated created() because it could
return one of three different file times depending on the OS and
filesystem type, without the ability to determine which one is which. It
is replaced by metadataChangeTime() and birthTime().
[ChangeLog][QtCore][QFileInfo] Added QFileInfo::metadataChangeTime(),
which returns the time the file's metadata was last changed, if it is
known, and falling back to the same value as lastModified() otherwise.
On Unix systems, this corresponds to the file's ctime.
[ChangeLog][QtCore][QFileInfo] Added QFileInfo::birthTime(), which
returns the file's birth time if it is known, an invalid QDateTime
otherwise. This function is supported on Windows and on some Unix
systems.
Change-Id: I0031aa609e714ae983c3fffd1467bd8b3e3a593d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Added flowId='name' to each message when using TeamCity logging format.
This is necessary to distinguish separate processes running in parallel.
[ChangeLog][QtTest] Added flowId to messages when logging in TeamCity
format. FlowId is used to distinguish logging from multiple processes
running in parallel.
Change-Id: I7f5046c1058ff02770404caa2c9b3a5398f97f6b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commit 32a94e54 changed the API of the QPS engine (PaintCommands
class). Update the usage accordingly.
Change-Id: Ide57609e636dad0aa434d1049b600b72f731bc30
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This is required so that one can use QSettings in situations that
temporary files or renaming may not work.
[ChangeLog][QtCore][QSettings] Added setAtomicSyncRequired(), which
allows one to use QSettings with config files in unwriteable directories
or in Alternate Data Streams on NTFS on Windows. This used to work
before Qt 5.4, but remains a non-default behavior due to the potential
of data corruption.
Task-number: QTBUG-47379
Change-Id: I81480fdb578d4d43b3fcfffd14d4f77112f0402f
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
We can't use MoveFile to do atomic commits on an ADS, so QSaveFile needs
to detect when the target name is ADS and then use the direct fallback
mode.
[ChangeLog][QtCore][QSaveFile] Saving to Alternate Data Streams on NTFS
on Windows is now possible, but requires setDirectWriteFallback(true).
Task-number: QTBUG-47379
Change-Id: I81480fdb578d4d43b3fcfffd14d4bc062ae1750d
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
So we can use it in QTemporaryFile, QTemporaryDir and QFile::rename()
[ChangeLog][QtCore][QTemporaryDir] The class now supports the "XXXXXX"
replacement token anywhere in the template, not just at the end. This
behavior is similar to what QTemporaryFile supports.
Change-Id: I1eba2b016de74620bfc8fffd14ccb645729de170
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
A nullptr QVariant should become a null QString or QByteArray,
since null strings have previous in our APIs represented the null value
in the absence of a dedicated null metatype.
Change-Id: I3b8f6386ece314d7c196959fbcf042c4fe0508a0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Based on a test-case from Israel Lins Albuquerque, that my planned
fixes to our parsing of ISODate date-times would break.
Change-Id: I5658df9c7daed59d43aa5574df25d4d9eac4677d
Reviewed-by: Israel Lins Albuquerque <israelins85@yahoo.com.br>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Actually check that there's a T where ISO 8601 wants it (instead of
just skipping over whatever's there), with something after it; move
some declarations later; add some comments; and use the QStringRef API
more cleanly (so that it's easier to see what's going on). Simplify a
loop condition to avoid the need for a post-loop fix-up.
This incidentally prevents an assertion failure (which brought the
mess to my attention) parsing a short string as an ISO date-time; if
there's a T with nothing after it, we won't try to read at index -1 in
the following text. (The actual fail seen had a Z where the T should
have been, with nothing after it.)
Add tests for invalid ISOdate cases that triggered the assertion.
Change-Id: Ided9adf62a56d98f144bdf91b40f918e22bd82cd
Reviewed-by: Israel Lins Albuquerque <israelins85@yahoo.com.br>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I was mistaken before, the "es" part for that version isn't optional, it
*must* be omitted.
Change-Id: I9e83d2317523fb0a905e40b95a56033cf693b93b
Reviewed-by: Paul Lemire <paul.lemire@kdab.com>
Changes the QVariant::isNull() implementation for
pointer types so they return true if null.
[ChangeLog][QVariant] QVariants containing pointers will now return
true on isNull() if the contained pointer is null.
Change-Id: I8aa0dab482403837073fb2f376a46126cc3bc6b2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore] Added qEnvironmentVariable, which returns the value
of an environment variable in a QString, while qgetenv continues to be
used to return it in a QByteArray. For Unix, since most environment
variables seem to contain path names, qEnvironmentVariable will do the
same as QFile::decodeName, which means NFC/NFD conversion on Apple OSes.
I opted not to #include <qfile.h> from qglobal.cpp to implement that
QFile::decodeName functionality, so qglobal.cpp doesn't depend on
corelib/io and to avoid possible recursions.
Task-number: QTBUG-41006
Change-Id: I14839ba5678944c2864bffff141794b8aaa7aa28
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test fails when the system harfbuzz (version 1.3.2) is installed.
Change-Id: Id18a5a3c503f64ef56567d71655e433a46908b3f
Task-number: QTQAINFRA-1363
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The test fails when the system harfbuzz (version 1.3.2) is installed.
Change-Id: Id18a5a3c503f64ef56567d71655e433a46908b3f
Task-number: QTQAINFRA-1363
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
If in a slot connected to QAbstractItemView::clicked
QAbstractItemView::setModel(nullptr) is called the method
QAbstractItemView::mouseReleaseEvent will cause a segmentation fault.
The problem is that the method QAbstractItemView::model used in
QAbstractItemView::mouseReleaseEvent will return a nullptr if a null
model was set. The solution is to used d->model since it is always a
valid model. (See line d->model =
(model ? model : QAbstractItemModelPrivate::staticEmptyModel());
in method QAbstractItemView::setModel)
Change-Id: I6f01bdeac64495ee4a76adcc7bf8da8a7719ef4d
Reviewed-by: David Faure <david.faure@kdab.com>
- Determine window sizes according to screen size and turn off
scrolling.
- Center the window to get it out of the way of taskbars.
- Make the window top-most.
- Turn off scaling so that coordinates passed to the QWindow
child match device coordinates and the child is positioned
correctly.
- Make the child window a yellow raster window for easier
debugging.
Task-number: QTBUG-45956
Change-Id: I05864770f8ed638d0a36f3e3f2afed73d2952436
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
These tests need fixing, but they are already partially blacklisted
and need investigation once the switch is completed.
Task-number: QTQAINFRA-1292
Task-number: QTQAINFRA-1355
Task-number: QTQAINFRA-1362
Change-Id: Ic50d0c4a01ee7e72be1129d418eff244ba783185
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This test fails on Windows 10 x64 Creators Update CI builds for unknown reasons.
Change-Id: I766bccfd4dea9ea195c68403018b419e800a7b3b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
tst_qgraphicswidget::checkReason_ActiveWindow fails on Windows 10
Creators Update. Added expect fail for Windows platform.
Task-number: QTBUG-62244
Change-Id: I71868a496659e7136af9a5b74684ba39edaf03ae
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This workaround was created to make tst_qfocusevent test pass on Windows
10 x64 Creators Update.
Task-number: QTBUG-61467
Change-Id: I63eb149ae850174fb5de99761a6001e000a151a2
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
don't try to execute a binary from the install dir.
amends 8e776d39f.
Change-Id: I37990bc83b295379f0c93f4ca712e1bbf980fd44
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The store is using QSettings under the hood. A user can enable/disable
storing HSTS policies (via QNAM's setter method) and we take care of
the rest - filling QHstsCache from the store, writing updated/observed
targets, removing expired policies.
Change-Id: I26e4a98761ddfe5005fedd18be56a6303fe7b35a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Allows setting the stack size for the thread pool
worker threads. Implemented using QThread::stackSize.
Task-number: QTBUG-2568
Change-Id: Ic7f3981289290685195bbaee977a23e0c3c49bf0
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Update documentation to be clearer on the special null variant state
with no value as opposed to a variant with a null value, and only block
conversions of the former.
Change-Id: I24fd50285414e049de87de54a63700a89bd5adf1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The image appears to be 128x128. Fixes test failures
FAIL! : tst_QImageReader::readFromResources(rect.svg) Compared values are not the same
Actual (image.size()): QSize(128x128)
Expected (size) : QSize(105x137)
.\tst_qimagereader.cpp(1493) : failure location
FAIL! : tst_QImageReader::readFromResources(rect.svgz) Compared values are not the same
Actual (image.size()): QSize(128x128)
Expected (size) : QSize(105x137)
which likely do not show in the CI since the qtsvg module is not
available when checking only qtbase.
Change-Id: I84ebdde6f2251f56a00f16a54bd20d0c2b23638e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
When creating the statements, it is now possible to pass a list of
enabled layer names. Every node or edge which is not in the list of
enabled layers will be pruned from the graph prior to traversal. Note
that an empty layer list for a node or an edge means it is on all
layers.
Change-Id: I61a4df7d395b4beb42ee55ce08fef8ebe04263c9
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
In particular, go through QMetaType/QMetaEnum to deal with enums.
Change-Id: I2e847ba328eb46609b86b3dfd6c4dbf532d78b7d
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
In particular, go through QMetaType/QMetaEnum to deal with enums.
Change-Id: Idbe16c913c1d471a4a91d219f77876e498c192d9
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Commit 9e64fc9e1c caused a regression
which stored all QDateTime entries as if they were in localtime,
which causes them to be offset by the amount of local timezone
offset. This is fixed by adding "Z" if the time should be in UTC or
using "+/-hh:mm" if it should use fixed UTC offset or specific
timezone.
Task-number: QTBUG-57138
Change-Id: Ie60905dfb3a517db442b636ca41daf8348753d84
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Check we do handle DST after epoch and don't before.
Check we do notice various unusual transitions.
Check we do handle non-whole-hour-offset zones.
(Unfortunately, MS-Win lacks data for some of the zones and is wrong
about the two date-line crossers, so we skip those for it.)
Change-Id: If420d61b9db7f914ca25c22297c16e917ad2307a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QWinEventNotifiers were limited to 62 instances, because of
WaitForMultipleObject's limitation to MAXIMUM_WAIT_OBJECTS - 1 handles.
Use the RegisterWaitForSingleObject API which does not have this
restriction and executes waits in threads managed by the system. A
central manual reset event per event dispatcher is signaled in the
RegisterWaitForSingleObject callback and waited for in the event loop.
Task-number: QTBUG-8819
Change-Id: I3061811c18e669becf9de603bbdd7ba96e4d2fcd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
When ::WSAIoctl() reports 1 byte available for reading, we are trying
to peek an incoming datagram to ensure that the data is actually
delivered. But, according to MSDN docs, we are not allowed to pass NULL
as 'lpNumberOfBytesRecvd' parameter to ::WSARecvFrom() call, if
'lpOverlapped' parameter is also NULL.
The case with an empty datagram is fixed accordingly.
Change-Id: Id13038245332d3fb4bc18038d44a7cfd7ce04775
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Split the test in two: one test that requires the symlinks
and test files and one that does not need them.
In the test with test files, verify each step and the deletion
of the files.
Task-number: QTBUG-58654
Task-number: QTBUG-50835
Change-Id: I14de57ce7a1df2d834d5a7565c804dead1d89088
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test is just wrong.
It suggests, that it tests minimal block size,
but in reality it is checking if a maximal peak of block size
is bigger then expected minimum block size.
The minimal block size is 1, not 1024 / ideal threads count and
it is defined in BlockSizeManagerV2.
The maximal block size is defined and it is fixed, but it is an
implementation detail, probably not worth testing.
The test is based on a race condition as peakBegin and
peakBlockSize are modified in parallel from multiple threads,
without any synchronization.
Change-Id: I430eedcf83b0fa3e2ce2cfd294eaee7b301e48ae
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This needs a zone with transitions near the epoch; and the only CET
with DST that winter was Italy (copied by Malta), for which the Olson
database had a recent (2016) correction to its data, for that winter.
That means we get inconsistent results on O/Sen of different ages.
So add a separate testEpochTranPrivate(), alongside testCetPrivate(),
and test it with America/Toronto. (Unfortunately, MS-Win gets the
date wrong on the first transition after the epoch, so we have to code
round that.)
Since information before the epoch isn't reliably available, only test
the search backwards if nextTransition does find something before it.
(We can safely assume all real transitions happened since 1601;
non-celestial time-keeping wasn't accurate enough, before that, for
anyone to synchronize with anything but celestial time.)
Change-Id: I984b46938a2805b93bb2afd6855e317b5d66b386
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Found while working on suppressing the warning about the return value
(which is either 0 or -1) was being ignored.
Task-number: QTBUG-61968
Change-Id: I02d22222fff64d4dbda4fffd14d148b1724547ca
Reviewed-by: Florian Bruhin <qt-project.org@the-compiler.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Passing a null pointer as a parameter to the setChild function no
longer crashes when calling the
QStandardItemModelPrivate::itemChanged signal. The child is removed
from the model.
The patch also fixes the behavior of deleting a item. A
dataChanged signal is emitted.
Change-Id: I027e8b0d84fe33c5fca056df870f0e60a020824b
Reviewed-by: David Faure <david.faure@kdab.com>
This reverts commit 346cd79192. The bug
report was incorrect, since the suggested file name is actually valid,
it just happens to name an Alternate Data Stream (ADS) "20:803Z.txt" in
file "testLog-03".
[ChangeLog][QtCore][QFile] Reverted an incorrect change from Qt 5.9.0
that forbade the creation and access to Alternate Data Streams on NTFS
on Windows. This means that file names containing a colon (':') are
allowed again, but note that they are not regular files.
Task-number: QTBUG-57023
Change-Id: I81480fdb578d4d43b3fcfffd14d4f2147e8a0ade
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
The test is marked as expected failure for the last 3 years, in CI it
is proven to be somehow flaky and it is failing now because of XPASS
which is not covered by blacklist feature.
This patch extends efforts of 7eba6d039d
and 03b4838cb5 by blacklisting the test
completely.
Change-Id: Ia295d61620fa6bc97b168d4de9456a18ed5c064f
Task-number: QTQAINFRA-1333
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In the past, we had an undocumented text flag that worked with
one of the QPainter::drawText() overloads. This was never intended
as public API and served a specific cause in Qt WebKit at one point.
But there is a general need for such API, as disabling shaping features
easily gives 25% performance improvement on text rendering even for
fairly short strings.
This patch adds a new style strategy flag to disable shaping and
will just uses the CMAP and HDMX tables to get glyph indices and advances
for the characters. In Qt 6, the TextBypassShaping flag can be removed
completely and be replaced by the style strategy.
[ChangeLog][QtGui][Text] Added QFont::PreferNoShaping style strategy to support
improvements to performance at the expense of some cosmetic font features.
Task-number: QTBUG-56728
Change-Id: I48e025dcc06afe02824bf5b5011702a7e0036f6d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Currently QLocale::c().bcp47Name() returns "C" which, according to [BCP47], is
not a valid language tag. In particular it does not conform to the ABNF grammar
in section 2.1 which specifies a minimum length of 2 characters for all language
tags.
[BCP47]: https://tools.ietf.org/html/bcp47
This patch changes the return value to "en" seeing as the documentation for
QLocale::Language states that the C language is identical in behavior to
English.
Task-number: QTBUG-61949
Change-Id: I2a381def8fb7156467e01d105da92bb1f4821204
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When QCOMPARE(,) reports two 12-digit numbers, it's not always
immediately obvious what the difference is (much less what 1/3600000
of it is); nor is it obvious that (or why) a given 12-digit number is
in fact correct. In contrast, our eyes can make sense of a
QDateTime's reported value quite well, enabling us to see what's
different; and it's possible to at least confirm the plausibility of
2-or-3 am on a spring or autumn day at a plausible transition (or even
to confirm it exactly by consulting suitable web-sites). Also
document the actual transition happening in each case (since I *did*
consult a suitable web-site). So prefer to QCOMPARE(,) two QDateTime
values instead of two 12-digit qint64s.
Where a that would be unsuitable, at least compare the difference to
zero, to make the error easier to understand (except when one of the
twelve-digit numbers consists entirely of 9s; that, for once, actually
is easy to see).
Write various multiples of 3600 as the relevant intelligible whole
number times 3600, rather than premultiplying, to make it obvious to
reders what's going on.
None of this changes what is actually tested.
Change-Id: I488e751283a55d4623c93612af13ad631144900d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A loop initialized i = 0 and used i > 2 as its condition; it didn't
get very far. Consequently, the test it was in never checked whether
CET's 2011 transitions happened at the times expected - which they
didn't, as the times in question were in fact the times at which
Pacific/Auckland had its transitions that year.
Change-Id: I94d1f8df615c5bcfe48e73d41b4c7faf2beccb96
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The original test is quite unfortunate - it has cipher names hardcoded,
and it fails with OpenSSL 1.1 - no matching cipher found for 'RC4-SHA'
and QSslContext::initSsl fails with 'Invalid or empty cipher list'.
We skip this test entry for 1.1.
Change-Id: I810b80a62d9e27a60db71fd412af0c80630d976c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Moving the cursor is not synchronous.
Change-Id: I6b820af026585e1fcfef845cc712fa8f6812e941
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Make QVariant::toJsonValue do conversions as well as
QJsonValue::fromVariant.
Change-Id: I175d43677061470691e2e0104a800be355fbbd3d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
internalInsert() will set the cursor to the right position which accounts
for any input mask set on the control as well. Therefore it will already
be placed at the next correct position and should not be changed again
after that.
Task-number: QTBUG-40943
Change-Id: Ic0f5fad6999ddd367e435ec4409a5db5b9eacb7b
Reviewed-by: Daniel Teske <qt@squorn.de>
Reviewed-by: David Faure <david.faure@kdab.com>
Change-Id: Id220f10f4ff756230155c7c8f37713d53ed3ca0c
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It's flakey/failing on macOS, the menu is opened but opened above
the button, so the intersection test fails.
Change-Id: I6b13a1b0df2b07fa36bbb73071cdeb55547ac93a
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
...tst_qlineedit.cpp:1938:9: warning: explicitly assigning value of variable of type 'Qt::Key' to itself
-Wself-assign]
key = key;
~~~ ^ ~~~
Change-Id: I18a46f61e13f6e2c74edce869a1c36a7f3a0fb70
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Counting draw calls in the style is not a reliable way to count
italic items in the combobox.
Task-number: QTBUG-62080
Change-Id: I6cb6d54535f073f66cfcf61bb19eb645284c835d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Don't assume signals will not be emitted during show. The test should
focus on testing that changing the model results in change signals. What
happens before that is not under test, and not stable.
Change-Id: I71e62abc15fc81c069d7685e4342e795449c3632
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This hasn't done anything since at least Qt 5.0. It's possible it was
only used in Symbian, which we removed before the 5.0 release. This only
served to make the tst_QNetworkProxyFactory test slow.
[ChangeLog][QtNetwork][QNetworkProxy] The functions related to
QNetworkConfiguration are deprecated. They've performed no action since
Qt 5.0, so code using them can safely stop doing so.
Change-Id: I84e45059a888497fb55ffffd14d31b7c2978a04e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
It's failing when enabling synchronous expose events, but likely
due to making assumptions about expose behavior. Will be looked
at in more detail once the expose event patch is in, so we can
move forward.
Task-number: QTBUG-62092
Change-Id: Ie76b5f11ccf841981a42d2eda19fbcda8b43c36c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Getting the end position of the selection was not possible.
[ChangeLog][QtWidgets][QLineEdit] Added selectionEnd(), selectionLength(),
complementing selectionStart().
Change-Id: Iaecc624063d7c043f9502351f07eb76f869e86f1
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Fixes flakiness where we enter and exit window states too fast on macOS,
while also removing 2 second waits in the positioning tests that were
slowing things down needlessly.
Change-Id: Ia4ee4d4812474c520fdd3f76b047f4eabe1a8220
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
They fail when enabling synchronous expose events. Disabled for now
until we can look into why, but it's assumed to be an issue with the
test harness/how we hook into Quartz to send/observe events.
Task-number: QTBUG-62042
Change-Id: I723d049ec5d1029edb0ad3b1f47fffc829a8924b
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This is the result of running the (experimental) clang-tidy check
qt-modernize-qsharedpointer-create
Discarded changes:
- tst_qsharedpointer.cpp: not sure we want these replacements there
(→ separate change)
- tst_collations.cpp: hit in a template specialization that is
instantiated with both QSharedPointer and QSharedDataPointer.
Change-Id: I203c2646e91d026735d923473af3d151d19e3820
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test verifies processEvents(WaitForMoreEvents)
behavior by first processing all pending events (in
a loop) and then verifying that a following processEvents
call actually waits.
But there is no guarantee that the OS won’t introduce
more events after the first loop has completed. This
does indeed seem to happen on recent versions of macOS.
Change the test to not require that the processEvents
call blocked and de-blacklist.
Task-number: QTBUG-61131
Change-Id: Ic8fa74a6085165442791264f6f137a2fa6083138
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Verify that all pixels of the grabbed image are green instead
of comparing an image loaded from file.
The test then also passes when High DPI scaling is active in
which case a twice as big pixmap with DPR=2 is obtained when
grabbing the widget.
Change-Id: Ie5244a39a68ea0defd2590cf30f251d660d0869b
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Scale coordinates in a few places, remove pixmap scaling in
grabWindow() (Windows).
Change-Id: Iba9e5d3ca55422a14eda09c8d04329a455d3acb3
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This removes a lot of duplicated code that existed in both qglobal.cpp
and qsystemerror.cpp, including the hack to get the correct strerror_r
signature.
This removes the incorrect use of EACCES, EMFILE, ENOENT, and ENOSPC
from qt_error_string on Windows. qt_error_string is supposed to be used
only with Win32 error codes from GetLastError(), despite there being a
lot of uses in cross-platform and even Windows-specific code that pass
errno constants.
It may or may not work: that depends on whether the constants happen to
match. ENOENT matches ERROR_FILE_NOT_FOUND and one could argue that
ENOSPC matching ERROR_OUT_OF_PAPER is acceptable, but EMFILE isn't the
same as ERROR_BAD_LENGTH nor is EACCES, ERROR_INVALID_DATA.
Change-Id: I1eba2b016de74620bfc8fffd14cccb7f77f4b510
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ASN UTCTime uses two characters to encode a year (YY). When converting it
into QDate, it's quite naive to just add 2000. According to RFC 2459,
these YY represent dates in the range [1950, 2049].
This patch also introduces a helper function doing the checked conversion
from a string to int (to be reused in the following-up patches).
Task-number: QTBUG-61934
Change-Id: I3f6f471d24e8357b83b2f5973023b2b842751389
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It's broken due to tst_QWidget::testDeletionInEventHandlers,
but the root cause is not known yet.
Task-number: QTBUG-61986
Change-Id: I5b77efaf6910123d10a1456c54b873100e538a69
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The QWidget overload of qWaitForWindowExposed waits for the widget's
top level QWindow, which for the viewport is the graphics-view.
We want to explicitly wait for the viewport to be exposed, as the
viewport is covering the whole graphics-view, preventing it from
being exposed. See a6991376c.
Change-Id: I86df43871126562f09e4ce14931bc6fc7f06263d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Change-Id: I7dbe9c7a91301e0002f9e1827f6d0b495d2b9ec5
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The tests uses QWindow::requestActivate() to verify that a window does
not become active when a modal dialog is running, but on macOS we have
no guards for this, so the test can potentially fail.
In addition, due to a bug in QCocoaEventDispatcher, we end up waiting
5 seconds for that failure to manifest.
Task-number: QTBUG-61965
Task-number: QTBUG-61964
Change-Id: I2f1b62d953e9b6dabf2df0c3023564f27919c498
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The test assumes that resizing a QWidget to 0x0 will result in the
QWindow ending up with that size, and hence not being exposed, but
this is not the case. On a QWindow level we treat 0x0 as a trigger
for the platform layer to set the default size, and the window
ends up exposed.
Ideally QWindows should allow 0x0 sizes, but this is a bigger change.
In the meantime, we skip the tests so that other changes can be
integrated without the test failing.
Task-number: QTBUG-61953
Change-Id: Ib17187b4afd1b06eaa76653be18e93abea555b59
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Consider the raw string \\\\. The previous algorithm would consider
the last 3 \ to be escaped because the previous character is a \ and
thus calculating a maxLength of 3.
But this should be treated as two escaped \ with a maxLength of 2.
Change-Id: I6c4b8d090a2e1c6e85195d5920ce8b80aea1bc2d
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
When you are using a query that pulls from a number of different tables
then it can be ambiguous as to which table a particular field belongs to.
So this will make it possible to determine the table that a given field
belongs to if it is set.
Task-number: QTBUG-7170
Change-Id: I49b7890c0523d81272a153df3860df800ff853d5
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QVariant claims to be able to QVariantHash and QVariantMap, but the
actual conversion implementation is missing.
Task-number: QTBUG-61471
Change-Id: I0cba74642aa77dc423effed289bc7619922a89eb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The child viewport window covers the entire client
area of the parent window, which prevents the parent
window from being exposed.
This worked by accident until now, and was uncovered
by changes to the cocoa platform plugin implementation.
Change-Id: I0d62a1a33f125e5a9030c8def452a49886e54956
Task-number: QTBUG-50414
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
setDoubleStep works in the same manner as for setIntStep in that it is
just available for input dialogs getting a double.
[ChangeLog][QtWidgets][QInputDialog] Added setDoubleStep to enable
changing of the step amount for getDouble().
Task-number: QTBUG-17547
Change-Id: I5cabcfceb23324f8045f2b1e49017644418db01a
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Several tests are not valid for 1.1 anymore:
1. SSL2 was removed, but there is no OPENSSL_NO_SSL2 and the 'protocolServerSide'
test is trying to use QSsl::SSLv2 and thus is failing.
2. We now use the generic TLS_server/client_method instead of version specific
methods we have in pre-1.1 back-end. So, for example, a client socket with
QSsl::TLS_V1_0 in its SSL configuration will be able to negotiate
TLS 1.2 if our server socket wants it, while with TLSv1_client_method
(OpenSSL < 1.1) our test was expecting SSL handshake to fail.
Change-Id: I18efd5921c79b189e4d9529be09299a361a8a81d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Now the parameters from the prototypes are used as default values and
the graph file can overload them.
Change-Id: I9a8a73963c7e578bd0a34e96f76f147a12224f4f
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This will allow to make the prototypes more extensible when referred to
from a graph file while providing some sane defaults.
Change-Id: I1ae10182427d8a7d29c51a64e19e99139494ea92
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This will allow to create nodes having an entry point for tuning, still
need to be exploited by the loaders and the shader generator. Coming in
further commits.
Change-Id: I8384b0f528c9919e9f8d35102adde2b307f08b80
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
We forgot to check that the node content was correct and complete when
loading the graph.
Change-Id: Id4ee6aaba6ca268b0785e7fa3fb51a19817e7c9c
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Changes internal data-size and pointer calculations
to qssize_t.
Adds new sizeInBytes() accessor to read byte size, and
marks the old one deprecated.
Task-number: QTBUG-50912
Change-Id: Idf0c2010542b0ec1c9abef8afd02d6db07f43e6d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Now that QFileDevice::setFileTime() provides a portable way to prepare
our test file, we can verify QFileInfo does handle the distant past,
notably including negative time_t values. The old MS-specific code
used a time back in 1601, which we can't hope to support
cross-platform, so use one in 1901 that's a little inside the range of
32-bit time_t.
Task-number: QTBUG-47985
Change-Id: I2de3e79d8c7864221f92395813b63f373e4d8a3b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The output didn't previously make clear that the datum was invalid.
It's now explicitly invalid. At the same time, use QDebug's space()
and nospace() methods to make spacing choices explicit.
Revised a QDate test to match.
Change-Id: I4699f5897530b4caa31c22fdb07de149832b30f4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Separate the part varying between tests from the common form of all
the tests, so the reader can see the common pattern and know for sure
that there's not a typo or copy-and-paste glitch.
Change-Id: I3145a26ab42c104eb27756d906ac87f937024bad
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
macOS hasn't had SC_ScrollBarAddLine and SC_ScrollBarAddLine
since 10.7, when transient scrollbars first appeared.
We also make the warning message a bit more informative.
Change-Id: Idef4684162456d9bc274eea77908a6afe24fa0f5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Subtract the viewport margins from the contentsRect in
QCommonListViewBase::updateHorizontal/VerticalScrollBar(). This
affects list views in icon mode and list mode / ScrollPerPixel.
Task-number: QTBUG-61383
Change-Id: I6f2f7951ac9344ac21cef1eba061780d130e2467
Reviewed-by: David Faure <david.faure@kdab.com>
[ChangeLog][QtCore][QLocale] Fixed the conversion of QTime to string
form and parsing from string form to always treat the value as the
decimal fraction of the seconds component. That is, the string format
".z" produces/parses ".2" for 200 milliseconds and ".002" for 2
milliseconds. Use of "z" or "zzz" is discouraged outside decimal
fractions to avoid surprises.
Task-number: QTBUG-53565
Change-Id: Ia19de85ad35e4eb7bb95fffd14792caf9b4a5156
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QWindowsFileSystemWatcherEngine uses one change notification
per directory to watch directories or files within that
directory. Adding files and their directories in a sequence
caused the value in QWindowsFileSystemWatcherEngineThread::HandleForDirHash
to be overwritten.
Relax the check for the flags (watcher attributes) to use >= and recreate
the change notification of a directory should its flags be insufficient.
This triggers when a file is added after its directory since files
require more attributes.
Task-number: QTBUG-61792
Change-Id: I371a72f1934fa82c53aaf84beb907825031f1c81
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fixed crash on QCoreApplication::translate() call from qqmlThread while
QCoreApplication::{install,remove}Translator() is called from the GUI
thread.
[ChangeLog][QtCore][QCoreApplication] Calling
QCoreApplication::translate() is now thread-safe.
Task-number: QTBUG-57095
Change-Id: Ie5340a42040a829f311c01332e05d4bbaf60462c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Covers non-document mode, tab icon, and adds a more
useable interface. Some parts are still missing, like
tab orientation and long tab titles.
Task-number: QTBUG-61092
Change-Id: Idbda84f513e3ff7f87fa04ae4476b11bd8bb6bf2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Fix a number of issues that caused polygons to not always be drawn
fully connected.
Ensures the original lastPixel is set when drawing closed polygons,
ensure we don't round away from the original starting point, and add
handling of edges that need to be rounded half a pixel sideways to line
up with endpoints.
Task-number: QTBUG-27053
Change-Id: Ib51ee5623a629996af51a0967096383f04e91e2f
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Especially in examples, where we should show off our convenience
functions, prefer calling these functions over doing arithmetic with
M_PI (or approximations thereto) and 180 (give or take simple
factors). This incidentally documents what's going on, just by the
name of the function used (and reveals at least one place where
variables were misnamed; the return from atan is in radians, *not*
degrees).
Task-number: QTBUG-58083
Change-Id: I6e5d66721cafab423378f970af525400423e971e
Reviewed-by: Jüri Valdmann <juri.valdmann@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Since the result is an actual zero, this section of code looking for
underflows kicks in. But we forgot to take the capital letter into
account when parsing the number.
Task-number: QTBUG-61350
Change-Id: Ia53158e207a94bf49489fffd14c6abbd21f0bac0
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
tst_QLocale::macDefaultLocale() was determining local-time's current
offset from UTC and using it when working out what to expect the
offset at 1:2:3 today to be. When a transition happens after 1:2:3 on
its day (which is usual for DST changes in Europe), this lead to using
the new offset to test a time before the transition; the test was thus
wrong and failed.
Use the time to be tested (and current date) to compute the offset to
use, instead of using the current date-time.
Change-Id: I1c02a5579bca859e1d1aeb4f45b24871a08287af
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reads the v4 and v5 info-header together with the rest of the info-
headers, and use that to report the correct image format before
decoding.
Change-Id: I69e2bcc54367b7f14820815ae2ae1fa2d8d5dc8c
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Qemu uses some memory for each generated thread. This test creates
> 80000 threads and consumes about 10Gb of memory which is too
heavy for a VM.
Task-number: QTBUG-59966
Change-Id: I1bb8a0d7955778f5201948b41befcb9f1f391514
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
A visibile QOpenGLWidget receives a QEvent::WindowChangeInternal which triggers
a QOpenGLWidget::reset(). A hidden QOpenGLWidget never received this event
so it was never reset, resulting in a black rendering.
Includes unit-test that fails without this patch.
Change-Id: I9d2c57d66fa629f631a9829a5ebf4de09998ad75
Task-Id: QTBUG-60896
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The getentropy function, first found in OpenBSD, is present in glibc
since version 2.25 and Bionic since Android 6.0 and NDK r11. It uses the
Linux 3.17 getrandom system call. Unlike glibc's getrandom() wrapper,
the glibc implementation of getentropy() function is not a POSIX thread
cancellation point, so we prefer to use that even though we have to
break the reading into 256-byte blocks.
The big advantage is that these functions work even in the absence of a
/dev/urandom device node, in addition to a few cycles shaved off by not
having to open a file descriptor and close it at exit. What's more, the
glibc implementation blocks until entropy is available on early boot, so
we don't have to worry about a failure mode. The Bionic implementation
will fall back by itself to /dev/urandom and, failing that, gathering
entropy from elsewhere in the system in a way it cannot fail either.
uClibc has a wrapper to getrandom(2) but no getentropy(3). MUSL has
neither.
Change-Id: Ia53158e207a94bf49489fffd14c8cee1b968a619
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Fix regression introduced by 175f33ed8. 'expanding' property set to true
was ignored when QStyle::styleHint() returned Qt::AlignRight for
SH_TabBar_Alignment.
When we calculate tabs geometry, we put an empty tab at the front and
back and set its expansive attribute depending on tab alignment AND
'expanding' property.
Task-number: QTBUG-61480
Change-Id: I6a1827ae8a3f2c6bee5124c18c7f2b1c0a7862f3
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
tst_qvariant.cpp(80): warning C4309: 'initializing': truncation of constant value
tst_qvariant.cpp(4635): warning C4309: 'initializing': truncation of constant value
tst_qbytearray.cpp(1438): warning C4267: 'argument': conversion from 'size_t' to 'uint', possible loss of data
tst_qbytearray.cpp(1440): warning C4267: 'argument': conversion from 'size_t' to 'uint', possible loss of data
http2srv.cpp(64): warning C4018: '<=': signed/unsigned mismatch
tst_qinputdialog.cpp(352): warning C4804: '<=': unsafe use of type 'bool' in operation
Change-Id: Id012d88b7b20c5c9f128f2ef53753cc1d479f358
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Print time in the error handler to get some diagnostics
about when the network connection is dropped.
Task-number: QTBUG-61673
Change-Id: I376bec81f52d75c9b601f2af9b7e0b63f5883bb0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Use 15s instead of 10 (one check took 7.5s on my development machine, even).
Port to QTR_VERIFY_WITH_TIMEOUT instead of rolling our own waitForDone(),
as that reports (within limits) by how much the timeout was exceeded.
Change-Id: Id76a66d5f4fe3a4e814915add329eb4de3d264a7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
It breaks sth in QLocalSocket which is used in QtRemoteObject.
This reverts commit 5c6210e345.
Task-number: QTBUG-61668
Change-Id: Ib11890923773496e5d998b7709ef93b0a839a759
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>