Move some code (like registrations of meta types) from init() to
initTestCase() in the process.
Change-Id: I57db5156647cfadab554fbed853b2e68b2815f3b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Move the code from cleanup() into a separate cleanupTestData()
and call this from initTestData() and cleanup(). Remove slot init().
Change-Id: I4e7b5b89197ed0aa50f46f730e9c1d9c59749614
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
On some platforms our 1200 x 1000 bytes seems to be not enough to
fill kernel buffers (socket write). But it's not a reason to fail test,
just skip it.
Task-number:QTBUG-49205
Change-Id: I13ea6f315f9318288ba054cf8bfa6cdd61e489d2
Reviewed-by: Richard J. Moore <rich@kde.org>
Some of the examples make no sense without bearer management and
QNetworkSession is not defined if QT_NO_BEARERMANAGEMENT, so
tst_qnetworkreply.cpp has to be adjusted.
Change-Id: Ic2f73746cba74f670ae5b5e99b0be1461ff6d182
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Use QByteArray/QString addition instead in loops and for
test row names.
Change-Id: I7974ace5b34f2da43e7511044e80de1e733245ac
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Use character literals where applicable.
Change-Id: I1a026c320079ee5ca6f70be835d5a541deee2dd1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
A QAbstractSocket can be close()'d at any time, independently of its
current connection state. being closed means that we cannot use it to
read or write data, but internally it might still have some data to
send or receive, for example to an http server. We can even get a
connected() signal after close()'ing the socket.
We need to catch this condition and mark any pending data not yet
written to the socket for resending.
Task-number: QTBUG-48326
Change-Id: I6f61c35f2c567f2a138f8cfe9ade7fd1ec039be6
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Use QVERIFY2() with QTemporaryDir/File::errorString() consistently.
Attempt to catch issues like the below warning and follow-up issues.
QSYSTEM: tst_QFiledialog::clearLineEdit() QFileSystemWatcher: FindNextChangeNotification failed for "C:\Users\qt\_____aaaaaaaaaaaaaaaaaaaaaa" (Access is denied.)
Task-number: QTBUG-47370
Change-Id: I58a6e87c502627e976efa62ad73c912f3b2d49fa
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
The keyword no longer has a meaning for the new CI.
Change-Id: Ibcea4c7a82fb7f982cf4569fdff19f82066543d1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
This test fails on OS X: we first fill sockets' kernel buffers and then
we tryto write a 'residue', waiting in 'select' for 2 seconds.
It looks like on OS X (at least, 10.10) 2 seconds are not enough - we always have a timeout.
Wait ... 4 seconds.
Change-Id: Id679dccda10b8f7859b8dfa6456b91ec13d52f68
Reviewed-by: Richard J. Moore <rich@kde.org>
The test is very flakey in 5.5 integrations and the OS X CI machines have
notorious problems with networking stability. So the previously listed tests
are not really at fault, it's an infrastructure problem, that we choose to
ignore for the time being.
Change-Id: I7fbfa7b3778daa6b5e60d95b822847c92927122f
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
A couple of test always fail on OS X/iOS with SecureTransport
(simply not implemented yet).
Change-Id: Idd82262512938c36b657b497751738fdc804c182
Reviewed-by: Jeremy Lainé <jeremy.laine@m4x.org>
Reviewed-by: Richard J. Moore <rich@kde.org>
Also removed the XFAIL from connectToUnresponsiveHost
Change-Id: Ie0f5685a8fa437c00d22f9e76b51ac61347ce03b
Task-number: QTBUG-15111
Reviewed-by: Caroline Chao <caroline.chao@theqtcompany.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: Icaa1edafcc6e2779fbd6dbc2c058544d6e07f1e9
Reviewed-by: Richard J. Moore <rich@kde.org>
Non-OpenSSL backends are not able to report a specific error code
for self-signed certificates.
Change-Id: I56bf130335b2afa65cf2bd5248a40ac0e32f74c2
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
The test is crashing regularly (see bugreport).
Currently the test is not run in the regular CI system, that is why
the failures were not noticed.
Task-number: QTBUG-47128
Change-Id: I70d4ada0872316cc63d7629bb9ab2d055d70cf2a
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
This is a fix-up for cff39fba10.
That patch lead to some internal state issues that lead to the QTBUG-47048
or to QNetworkReply objects erroring with "Connection Closed" when
the server closed the Keep-Alive connection.
This patch changes the QNAM socket slot connections to be DirectConnection.
We don't close the socket anymore in slots where it is anyway in a closed state
afterwards. This prevents event/stack recursions.
We also flush QSslSocket/QTcpSocket receive buffers when receiving a disconnect
so that the developer always gets the full decrypted data from the buffers.
[ChangeLog][QtNetwork] Fix HTTP issues with "Unknown Error" and "Connection Closed"
[ChangeLog][QtNetwork][Sockets] Read OS/encrypted read buffers when connection
closed by server.
Change-Id: Ib4d6a2d0d988317e3a5356f36e8dbcee4590beed
Task-number: QTBUG-47048
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
They didn't show up in the "old" CI runs because they usually pass the second
time they are executed - which the testrunner does. The new CI doesn't do that
anymore, instead we now mark those tests explicitly and will track their record
of passing and failing in the new metrics database.
Change-Id: Id34dd6f792f38995b07b6fec88f833df64de2f8b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Set status code and status text if file was sent with reply.
Change-Id: Ie6acadc5c1d06538449262ffd8486e8de573b931
Task-number: QTBUG-45581
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Pasi Keränen <pasi.keranen@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
This patch fixes several upload corruptions if the server closes the connection
while/before we send data into it. They happen inside multiple places in the HTTP
layer and are explained in the comments.
Corruptions are:
* The upload byte device has an in-flight signal with pending upload data, if
it gets reset (because server closes the connection) then the re-send of the
request was sometimes taking this stale in-flight pending upload data.
* Because some signals were DirectConnection and some were QueuedConnection, there
was a chance that a direct signal overtakes a queued signal. The state machine
then sent data down the socket which was buffered there (and sent later) although
it did not match the current state of the state machine when it was actually sent.
* A socket was seen as being able to have requests sent even though it was not
encrypted yet. This relates to the previous corruption where data is stored inside
the socket's buffer and then sent later.
The included auto test produces all fixed corruptions, I detected no regressions
via the other tests.
This code also adds a bit of sanity checking to protect from possible further
problems.
[ChangeLog][QtNetwork] Fix HTTP(s) upload corruption when server closes connection
Change-Id: I54c883925ec897050941498f139c4b523030432e
Reviewed-by: Peter Hartmann <peter-qt@hartmann.tk>
Instead of making insignificant the all platform for
QtBase 5.5 integration.
Change-Id: Ief3f29c094bdbc90e684f19c1077ee595fb7d581
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Properly QSKIP tests that use disabled QProcess and symlink
features instead of excluding them silently by #ifdef.
Other reason is that moc doesn't respect QT_NO_* defines
in class definition which causes build issues on some
platforms.
Change-Id: I041020f7452f7d36c7ec8a5866a4ba5eb23d1f94
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
This commit adds support for following HTTP redirect responses on a per
request basis.
This behavior is disabled by default. It can be switched on by
setting the QNetworkRequest::FollowRedirectAttribute to true.
2 new error codes have been added to QNetworkReply:
* TooManyRedirectsError: Set when the number of redirects exceed a
given value set by the user (defaults to 50 if not set)
* UnsecureRedirectError: Set when we are redirecting from a 'https'
to 'http' protocol.
Test cases for the following scenarios:
* Single HTTP redirect using local test server
* Changing max-redirects
* Testing all redirect related error scenarios
The next commit will extend this feature at a QNAM level.
Task-number: QTBUG-8232
Change-Id: If9e28ad12bad08bcdc5bc511b1cd59dc9d8150f0
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
www.example.com is a reserved domain (RFC 6761), but IANA is running a
web server there. As for www.foo.com, that also exists, is a real
website and is often content-filtered in corporations (it triggers a
firewall warning for me -- "You attempted to visit a site that is in
violation of Intel acceptable use guidelines").
So use a localhost instead, since we don't actually need to connect to
the servers to do the work. And since we don't need to connect, I chose
port 4 as it's extremely unlikely someone is running an HTTP server
there (/etc/services lists it as unassigned).
Change-Id: Ia0aac2f09e9245339951ffff13c82439c6d5f945
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
There are more than 1000 new entries since the table has been
generated the last time.
Some auto tests needed to be adjusted, because some entries in
the TLD table were removed while others were added.
Change-Id: I4ceec392836d2031dfef49a0c5a857c31b36bb4c
Reviewed-by: Richard J. Moore <rich@kde.org>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
The Qt bug tracker URL changes as part of the qt.io transition
Change-Id: Icb4ab198943b93639b5e3a8d99262303785c6459
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
