It's necessary to make the test pass on certain platforms.
Change-Id: I717d492df437c0ffb75b21d9ef23ce602160fad1
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
We'll be adding calendar code here as well, and tools/ was getting
rather crowded, so it looks like time to move out a reasonably
coherent sub-bundle of it all.
Change-Id: I7e8030f38c31aa307f519dd918a43fc44baa6aa1
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It's perhaps best to ensure that functions we are deprecating shall no
longer be used in tests. Also, fix the "0 as nullptr" warnings.
Change-Id: I2f22c9b9482e80fa120bcd728ec269198a36678f
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
MD4C now makes it possible to detect indented and fenced code blocks:
https://github.com/mity/md4c/issues/81
Fenced code blocks have the advantages of being easier to write by hand,
and having an "info string" following the opening fence, which is commonly
used to declare the language.
Also, the HTML parser now recognizes tags of the form
<pre class="language-foo">
which is one convention for declaring the programming language
(as opposed to human language, for which the lang attribute would be used):
https://stackoverflow.com/questions/5134242/semantics-standards-and-using-the-lang-attribute-for-source-code-in-markup
So it's possible to read HTML and write markdown without losing this information.
It's also possible to read markdown with any type of code block:
fenced with ``` or ~~~, or indented, and rewrite it the same way.
Change-Id: I33c2bf7d7b66c8f3ba5bdd41ab32572f09349c47
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
At the moment, Coin builds tests as a separate qmake invocation
against an installed Qt. We need to support the same with CMake.
Change the tests subdirectory to be a standalone CMake project when
CMake does not detect an existing QtTest target while processing the
subdirectory. If the target exists, it means we are building the whole
repo, if the target does not exist, we need to call find_package
to find the installed Qt.
Refactor and move around a few things to make standalone tests build
successfully:
- add a new macro to set up paths to find QtSetup
- add a new macro to find all macOS frameworks
- add a new macro to set up building tests
- add a new macro that actually builds the tests
- export the INSTALL_CMAKE_NAMESPACE value into the BuildInternals
Config file
- export the CMAKE_BUILD_TYPE value, because a test project doesn't
have a .git subdir and thus defaults to be built in Release
mode, even though qtbase might have been built in Debug, so to
avoid the mixing, the propagate the build type
- stop overriding INSTALL_CMAKE_NAMESPACE and
QT_CMAKE_EXPORT_NAMESPACE inside QtSetup if they are set, because
the tests project doesn't specify a major version, and if we
override the values, the moc / uic targets don't get the correct
major version prefix and configuration fails
Change-Id: Ibdb03687302567fe325a15f6d1cb922c76240675
Fixes: QTBUG-75090
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Silence a warnings flood about qVariantFromValue(), QString::null
and QWeakPointer::data().
Change-Id: I73347190c0fa396b39b9efd00447cf24e48259a0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The two perform related calculations, so test them together.
RESULT : tst_QDate::monthLengths():
0.33 msecs per iteration (total: 87, iterations: 256)
Change-Id: I86b36a9182b00c0a1f40e858ed3e7812434974c4
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use QCOMPARE rather than QVERIFY an equality; ditch a stray blank line.
Change-Id: Ie828837919fb9d3cc774d82d0eebcf7728fed645
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
setHtml() or setMarkdown() can result in attempting to load resources
such as images that are needed to render the page. Whenever the
resource has a relative URL, loading depends on the baseURL having
already been set so that a complete URL can be constructed.
QTextDocument::resource() is called to load images, and uses baseUrl().
A little later, QTextBrowserPrivate::resolveUrl() is given an URL that
already has been extended with the baseURL if known; but it has its own
logic to resolve the resource URL against currentURL, or else to treat
it as a local file path if a file exists at that location. The autotest
was relying on this fallback to the local relative file path before; but
now it tests both with a local filename in the current directory for the
source HTML and also with a fully resolved source URL containing the
complete file path.
Also made minor style improvements in tst_QTextBrowser's TestBrowser class.
Change-Id: I46a850015d0e9c5bc5f13b9e37179a9323ab1980
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
They are going to be deprecated soon.
Use a lambda to mimic the adjacent addActions() calls.
Also, I didn't want to add a scope or extend the lifetime
of the return value of actions() until the end of the
function, and
for (QAction *action : actGroup.action())
would detach. I'd've made it a helper function, but it's
used only once, so... a lambda.
Change-Id: I2b3aae463036fd61a9cca7b4ef991b8752869bf3
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Fix some ui glitches for QAbstractSpinBox:
- update geometry when buttons are toggled on/off
- calc button size with subControlRect instead hardcoded 20px
- when buttons are not shown, don't add the button size in
sizeFromContents for common and macOS style
Fixes: QTBUG-39713
Fixes: QTBUG-75303
Task-number: QTBUG-67126
Change-Id: Ibf330c76deb16358a481bba6bd429fff6a5d57ae
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QScopedPointer uses normal delete, but we need delete[].
Change-Id: Id62a2c55f75ef4aa60580f5e04c4bf306a6dd3c9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Such files do not exist (as per QFileInfo::exists), but on some
platforms that rely on realpath(), QFileInfo::canonicalFilePath did
not return the empty string.
Use the same logic on macOS as we already did on Android, and include
a test case. Remove the unnecessary dynamic memory allocation and
use a stack-allocated array instead, unless we use modern POSIX in
which case realpath() will alloc the memory for the result for us.
Change-Id: Ide987c68ebf00cbb7b1a66c2e9245a12c7807128
Fixes: QTBUG-44242
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It's not clear why this test fails - and only does so sometimes - but
fail it does, so we ned to skip it to let development keep going. As
it happens, the same platform over-optimizes various computations
using qfloat16; which can at least be used to test for this platform,
since it wrongly distinguishes two qfloat16 values that theory and all
other platfomrs agree should coincide.
Fixes: QTBUG-75812
Change-Id: Ie9463d7dc21bca679337b475d13417b9f42bbf9b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Add support for surrogate code points U+D800 through U+DFFF,
represent them with JSON escape sequences.
https://github.com/tc39/proposal-well-formed-stringify
Change-Id: I84fea53a8ef400beebefdba10ea82dc510fe7dda
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test is failing in 5.13 for unknown reasons.
Task-number: QTBUG-72296
Task-number: QTBUG-72344
Change-Id: I24c1ad1b6def3096de99caeeebeee6e204cc75ca
Reviewed-by: André de la Rocha <andre.rocha@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Conflicts:
src/corelib/tools/qlocale_data_p.h
(Regenerated by running the scripts in util/local_database/)
src/gui/opengl/qopengltextureuploader.cpp
Done-With: Edward Welbourne <edward.welbourne@qt.io>
Done-With: Allan Sandfeld Jensen <allan.jensen@qt.io>
Change-Id: I12df7f066ed0a25eb109f61c4b8d8dea63b683e2
If the deadline is far in the future, the conversions to nanoseconds
or internal arithmetic may overflow and give an invalid object, thus
the deadline may end up in the past. Added a test to the testlib
selftest for sleep.
[ChangeLog][QtCore][QDeadlineTimer] Fixed integer overflows
leading to immediate timeouts.
Task-number: QTBUG-69750
Change-Id: I9814eccdf9f9b3add9ca66ec3e27e10cd5ad54a8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
dbus1_linked is only evaluated to true when the dbus package is found.
If it was not found, then it makes no sense to link against the
_nolink target, because no package was found in the first place.
When the package is not found, QtDBus uses a minimal dbus header which
is included with QtDBus sources, so there is no need for the _nolink
target.
This amends cc141cc5c6 and fixes a build
failure on macOS.
Change-Id: I71dcbb7465ad13b0bf03579f51412c373125caba
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
The window tends to grow to span screens in multi-screen setups; force it to
be on the primary screen by showing it maximized in that case.
Change-Id: I984ba7a4cd4abd1f862c59c8dca0e2275f44c724
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
- Use nullptr
- Use range-based for
- Use correct static invocation
- Set a title on shown windows to make it possible to identify
slow tests
- Fix the class declarations, use override, member initializations
- Use Qt 5 connection syntax where possible
- Ensure top level widget list is empty after each test, delete left-over
menu bars and disable menu animations
Change-Id: Ieeb943ea669cd139f1835088b816802e777a9676
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Use a fuzz check (cf 6309062722) and a minimum
size similar to tst_qwidget to make the test pass on large monitors with or
without active scaling.
Change-Id: I5a9e28e38e1d007057894c349c94f0e6fe12009c
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
- Use nullptr
- Fix C-style casts
- Fix redundant bool expressions
- Fix else after return
- Remove unnecessary casts to int from registered enums
- Fix most signedness-related warnings
- Use range-based for
- Use correct static invocation
- Set a title on shown windows to make it possible to identify
slow tests
- Fix the class declarations, use override, member initializations
- Use Qt 5 connection syntax
- Remove unused variables
- Streamline code in some cases
Change-Id: I1350b382b0b7d0f3198039fdc78892cfa1dd498d
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
- Use nullptr
- Fix C-style casts
- Remove unnecessary casts to int from registered enums
- Fix most signedness-related warnings
- Use range-based for
- Use correct static invocation
- Set a title on shown windows to make it possible to identify
slow tests
- Fix the class declarations, use override, member initializations
- Streamline code in some cases
Change-Id: I4c9b99126cff02136def0e03accdf1129fe6d72b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
- Use nullptr
- Fix C-style casts
- Use range-based for
- Use correct static invocation
- Set a title on shown windows to make it possible to identify
slow tests
- Fix the class declarations, use override, member initializations
- Use Qt 5 connection syntax; use lambdas where applicable
to remove helper slots
- Streamline code in some cases
- Replace helper function to convert touch points by the one in
QWindowSystemInterfacePrivate
- Use a logging category for the debug outpt, silencing some output
Change-Id: Ia46c7ad7c08f3afc8e5869ea99b66e406de97781
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The is a copy of the QString::SplitBehavior enum, but scoped
in the Qt namespace instead of inside QString, where it creates
problems using it elsewhere (QStringView, in particular).
Overload all QString{,Ref} functions taking QString::SplitBehavior
with Qt::SplitBehavior.
Make Qt::SplitBehavior a QFlags for easier future extensions (e.g.
a hint to use Boyer-Moore searching).
Added tests in QStringApiSymmetry.
[ChangeLog][QtCore] Added new Qt::SplitBehavior.
[ChangeLog][QtCore][QString/QStringRef] The split functions now
optionally take Qt::SplitBehavior.
Change-Id: I43a1f8d6b22f09af3709a0b4fb46fca61f9d1d1f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code contained a sizeable chunk of string parsing along with
qDebug()s in the normal path of execution. That code, however, was
only used for Qt's own autotests.
The idea of this patch is, then, to not only move the autotest case
into the cold text section (using Q_UNLIKELY), but also to completely
exclude it, when QT_BUILD_INTERNAL is not set.
Unfortunately, the structure of the function did not really lend
itself to #ifdefing that part of the code out (production code was in
the middle of non-production code), so I transformed the engine
selection code into a lambda, replacing assignment with returns, and
swapping the branches of the central if around to yield a single block
of code that can be excluded from compilation with just one #ifdef.
As a consequence, the runtime code is almost unaffected, and the
function is much easier to read now.
Since the test-specific code is only compiled into Qt now in developer
builds, guard the tests that rely on this behavior with the same macro.
Change-Id: I9fd1c57020a13cef4cd1b1674ed2d3ab9424d7cd
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Setting the childMode property to ParallelStates will result in an
invalid state machine. This is never checked (worse, we explicitly
allow it and have a constructor to set it), but it results in
findLCCA failing, which then results in a failing assert or crash.
This fix in this patch is to handle this case separately. The proper
fix would be to remove completely the ability to set the childMode
on a QStateMachine, but that will have to wait until Qt6.
Fixes: QTBUG-49975
Change-Id: I43692309c4d438ee1a9bc55fa4f65f8bce8e0a59
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Note that the test is still disabled, but this is needed in any case.
Change-Id: Ib7523ba800b94c32690c1bd09b23fc2078c71d4e
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
We have been rather sloppy in how read-only versus editable is handled.
According to the definition, editable signifies that in principle a
widget allows the user to change its text. Read-only means that this
ability is (currently) disabled.
Task-number: QTBUG-75002
Change-Id: I5d71843abcdaac52f4a60a1abcac2604341f6c96
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
The formatting of times in Norwegian has reverted to using dots in
place of colons, as it did before v31 (commit 82deb0ad1), so reverted
the tests to their state before that.
Change-Id: I8a09ce253731bb0f0f3caca117f06ad568940a81
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Also de-duplicate the "monospace" string in qgenericunixthemes.cpp,
and add tst_QFontDatabase::systemFixedFont() to verify that
QFontDatabase::systemFont(QFontDatabase::FixedFont) really returns
a monospace font across platforms. Replace commented-out qDebug()s
with qt.text.font.match and qt.text.font.db logging categories to
troubleshoot when the test fails (among other uses). Add qt.qpa.fonts
logging category to unix themes to show default system and fixed fonts
(font engines on other platforms are already using this category).
Fixes: QTBUG-54623
Change-Id: I2aa62b8c783d9ddb591a5e06e8df85c4af5bcb0c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Not removing QT_EMULATED_ALIGNOF logic from qglobal.h at this point, as
it might be used elsewhere.
Change-Id: Ie78922bb604a54aed03ab5b88e31a7f29a3a4de0
Fixes: QTBUG-73561
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Without this, a local build of this test on macOS fails.
Change-Id: Ie03fa47ff0a54db752af47f223fbe5724cd9c976
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code made two incorrect assumptions: that the strings used are "AM"
or "PM", or would be translated. Instead, the locale provides the
correct strings, and there is no need to translate. However, in order
not to break existing translations, we give those preference.
And that the AM/PM string is not longer than 4 characters, while in
e.g Spanish/Columbia locale the strings are "A. M." and "P. M.", ie 5
characters long. Also, the use of qMin in a function that is asked to
provide the maximum section length is wrong.
[ChangeLog][QWidgets][QDateTimeEdit] Use the information provided by
the locale to determine the AM/PM strings, unless they are already
translated.
Change-Id: I6d1b05376e5ac62fc58da2cdea2e6cb732ec6747
Fixes: QTBUG-72833
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
In this threaded setup the server can sometimes have the data before it
calls "waitForReadyRead", what happens then is that we fail the wait and
as a result the test fails overall.
Let's check if we actually got some data after all and then continue if
we did. Since both the client and the server currently wait the same
amount of time (2s) the max timeout for the client was increased by
0.5s so it has some time to notice that the server got the message.
Change-Id: Ib5915958853413047aa5a7574712585bcae28f79
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
(cherry picked from commit e79b1dcdf5)
Reviewed-by: Simo Fält <simo.falt@qt.io>
(cherry picked from commit d53b8b77bc)
Change-Id: I2f6ffb8e0a9b4d591edb6925e48baffcefc14511
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
If this callback is not set then OpenSSL will call the callback
used for <= TLS 1.2 unconditionally when connecting. If using PSK it
will call it again later once the preshared key is needed.
We don't currently handle the TLSv1.3 PSK, but we definitely should.
But for now we can work around it - when psk_use_session_callback is
called we simply change the PSK callback to a dummy function whose only
purpose is to restore the old callback.
This is mostly done to keep behavior the same as it is now for users
(and to keep our tests running).
Later we can add a new signal and handle this new feature properly.
Reviewed-by: Simo Fält <simo.falt@qt.io>
(cherry picked from commit d8efc8d718)
Task-number: QTBUG-67463
Change-Id: I4aca4ae73ec4be7c4f82a85e8864de103f35a834
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
We use global object to store errors found by q_X509Callback.
Thus, we also use a lock/mutex. It would appear all tests
involving in-process server and QNAM are prone to intermittent
failures on our Windows VMs - it's always about timeouts due
to the client socket (QNAM) locking and the server socket blocking
main thread while trying to acquire the same lock.
The real fix is to re-write our verification callback so that
it does not need locking/does not block the main and 'http'
threads as a result. But such change is too dangerous for
5.13.0 so we instead have a somewhat handicapped/reduced
test on Windows.
The fixed QSSlSocket will go into 5.13.
Task-number: QTBUG-76157
Change-Id: Ia54701bcb3f6f079a69e52c8904ac3efcee4a787
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
[ChangeLog][QtCore][QTextBoundaryFinder] Sentence breaking now
no longer breaks between uppercase letters and comma.
This is a deviation from the Unicode specification,
but produces less surprising behavior.
Fixes: QTBUG-75857
Change-Id: If1e78b3be3f20250d01100353ea7da6110985f82
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
QT_DEPRECATED_X() was not added with
d6d33f0b80 for the deprecated
QComboBox functions - Add them now.
Change-Id: I8d4ea08766ae6ff052dfccac6c3f35ecf34affb7
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
- Never for global inputs
- Otherwise only if the temporary is referenced more than once
-> meaning it's actually caching the result of some operation
Tests updated accordingly.
Change-Id: Ic76615370d23dee3965ca6350d5257a8be5a3e22
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This way we don't need to run rcc during cmake time
Change-Id: Id92111bce6c2b6798f3b18552cea82c8d07c4fc0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The file system appears to cache too aggressively, so if the reported
storage size doesn't change after flushing to disk, ignore the failure.
Change-Id: Iba7dce79591447fac296bfe92c2dc993d36d0c2a
Fixes: QTBUG-69868
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Don't go into an infinite loop breaking pages, when an image is about
as large as the page. Correctly take top and bottom margins into account
when calculating whether the image could fit on one page.
Amends change 416b4cf685.
Fixes: QTBUG-73730
Change-Id: Id311ddf05510be3b1d131702f4e17025a9861e58
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
...and other slight modernizations and minor fixes.
Change-Id: Ide587d9fe59ca9113ae775882c99a50debaf9000
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The full stroker does not produce good results for aliased lines
thinner than 1 pixel. Avoid it by making sure that such thin lines
are painted by the cosmetic stroker, even when they have
non-uniform transformation.
Fixes: QTBUG-73866
Change-Id: I7b5f0fa555903246e0c3fd92cd435cc8c0b15a24
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
QDateTime's short names setUtcOffset() and utcOffset() have been
deprecated since 5.2, in favor of setOffsetFromUtc() and
offsetFromUtc().
QDate's shortDayName() and shortMOnthName() have been deprecated since
5.10, in favor of QLocale's dayName() and monthName(). Also, the
tests that were using them are testing methods only present when the
datestring feature is enabled; so condition them on that feature.
Change-Id: Ibfd4b132523ca8fbc1cb163353a44e0500877fd5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a regression introduced by 63967313f5 which blocked signals
on the view, but not on the model.
Change-Id: Ib2f93fe6ef842264aaba200c98ee4a19065ca220
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
Reviewed-by: Laurent Montel <laurent.montel@kdab.com>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
If columns are removed and we get notified via layoutChanged, the code
tries to restore old section sizes, and went out of bounds, leading to
an assert in QVector. Simply add an if() to skip restoring out-of-bounds columns.
This comes from https://bugs.kde.org/show_bug.cgi?id=395181,
which translates into the unittest that is part of this commit.
Change-Id: Ide42176a758f87b21957c40508127d67f1d5a2d9
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Add a test that checks for the Presence of Qt for Python
and runs Python compile tests on the baseline files.
Task-number: PYSIDE-797
Change-Id: I7e15c3c75261a7d94fc6654a95d49ba323cbe7d6
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
[ChangeLog][QtCore][QMetaObject] Non-copyable lambdas can now be used
with invokeMethod(). For consistency reasons, the functor object is
now always moved.
Fixes: QTBUG-69683
Change-Id: I66ff5e21d6d1926f0f7c5f8c304bed1a90b69917
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
When re-parenting, some widgets change their children. For example
QLabel, when set to rich text, will not update, until receiving a polish
call, at which time getting a list of all children recursively and then
trying to call functions on them will crash, since the children change
in the middle of this operation.
Fixes: QTBUG-69204
Fixes: QTBUG-74667
Change-Id: I95dd83ebeed14c017e22552ddd47658ae8a09353
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Usually, when you load a plugin, you don't want to load just any plugin
that fulfills a given interface, but rather a specific one. When loading
dynamic plugins you can differentiate the plugins by file name. This
doesn't work in the static case, and file names are also separate from
the plugin metadata shipped inside the plugin files.
To solve this problem, different hacks have been developed in various
places. QML extension plugins add a special property "uri" via the -M
option of moc, QML debug plugins expect you to add a json file with
an array of "Keys", Qt Creator plugins have a "Name" in their json
files, etc.
By allowing the identifier for the plugin to be specified inline with
the metadata declaration we can make many of the above workarounds
obsolete and provide a clean way for users to find their plugins.
Task-number: QTBUG-74775
Change-Id: Ie2af16c49d4c5aa5a77fab0fae1e0a4449bd7a39
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
If the start position of a backward string search was the at the start
of a paragraph, the code would start searching at an illegal position
(at the eol character) in the preceding paragraph. That caused
that whole paragraph to be skipped, so any matches there
would not be found. Fix by making sure the search starts at legal
position.
Fixes: QTBUG-48035
Change-Id: Id6c0159b6613ec75ec617a0a57096ceef2b4cbd0
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
- Use nullptr
- Fix warning about inconsistent parameter naming in CsvCompleter::pathFromIndex()
- Fix C-style casts
- Use range-based for
- Use correct static invocation
- Set a title on shown windows to make it possible to identify
slow tests
- Use initializer lists
- Fix the class declarations, use override, member initializations
- Remove goto, streamline code
- Use auto to avoid repeating the type
- Introduce std::unique_ptr
Task-number: QTBUG-38014
Change-Id: Ia8ecd799064d630648b385b606848d7474c51363
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The class used the default debug operator for QObject, which outputs
the object's address. This makes it hard to compare the log output.
Make the existing QObject formatting helper from the EventFilter
publicly usable by providing a helper with a stream operator.
Change-Id: Ifab83e23cc792a5efe231fd9ae84e0439ab0d609
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
This is needed for cases where we use e.g. "file:///test.html?query#Fragment".
The fragment and query were already preserved for the qrc scheme. This
fixes it for the file scheme.
Change-Id: I5713e4a25372fdd55ac255b1c6228b4dea419244
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Use the comparison helpers to do fuzzy checking of geometries.
Change-Id: I00f4403f3bca2e8a3996e938a85ba799e083058c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
We use global object to store errors found by q_X509Callback.
Thus, we also use a lock/mutex. It would appear all tests
involving in-process server and QNAM are prone to intermittent
failures on our Windows VMs - it's always about timeouts due
to the client socket (QNAM) locking and the server socket blocking
main thread while trying to acquire the same lock.
The real fix is to get rid of global variable/locking, we'll
have it later (quite a change and requires a lot of accuracy).
Task-number: QTBUG-76247
Change-Id: Iffc90d9e16783f17f62e836e01c35f22681bdd39
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Use QTRY_COMPARE to fix recent fails like
FAIL! : tst_QGraphicsView::cursor2() Compared values are not the same
Actual (view.viewport()->cursor().shape()): IBeamCursor
Expected (Qt::SizeAllCursor) : SizeAllCursor
Task-number: QTBUG-76259
Change-Id: Ie9d4bbe45a3be6064ec88ee237360beb92a61481
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
It's really failing only on Windows 10 it seems.
Task-number: QTBUG-76259
Change-Id: Ieb541dc994a17e82478a5cc2643e0a89fd5aa97d
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Liang Qi <liang.qi@qt.io>
NoDefaultConstructorRef1 was taking a reference of the input, which
meant in the first test it would get a reference to the temporary
created by the 1 literal. A temporary that would be out of scope by
the time we check its value.
Instead add a test with unique_ptr to test we can pass movable
temporaries.
Change-Id: I6b02377dfe30c82b6e71bfb3353a81ad81558ed3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qt5_add_big_resources is only available if using CMake 3.9 and later.
This amends cdccd0222b.
Task-number: QTBUG-55680
Task-number: QTBUG-75806
Change-Id: Ibba7af6ee7edfb226368937d543b7ec5cc93eb16
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
- Move the fuzz check introduced by
6309062722 to a shared header for
reuse. Use it in in more places to account for rounding errors
introduced by odd window frame sizes when scaling is active.
- Use the test widget size to ensure windows do not violate the
minimum decorated window size on Windows when scaling is inactive
on large monitors.
Task-number: QTBUG-46615
Change-Id: Icf803a4bc2c275eadb8f98e60b08e39b2ebebedd
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
It should have been qfloat16(1)/qfloat16(infinity) in any case.
Sadly, that behaves no better than qfloat16(1.f/qfloat16(infinity)),
which was promoting the infinity back to float. So retain the check
for over-optimization (but make the comment more accurate).
This is a follow-up to d441f6bba7.
Change-Id: Iec4afe4b04081b0ebfbf98058da606dc3ade07f4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... spotted with the brand-new checks for that in QCharRef.
The rx[i] == ~~~ check is clearly wrong, as rx is the regexp
we're building and `i` was not supposed to index into it.
The intended meaning was wc[i] == ~~~, testing if we were seeing
the closing bracket of a character set. We need to check for
that immediately for dealing with the special syntax of []...] where
the ] belongs to the character set (it can't be the closing one
as character sets cannot be empty).
Fix and add a regression test. Bonus: this code was almost
unchanged since 2009.
Change-Id: I958cd87fc25558e9d202d18b3dd4a35d0db16d8d
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: hjk <hjk@qt.io>
The value of NColorRoles got changed since 5.11. It introduced one more
role called "PlaceholderText" in the ColorRole enumeration.
When using QDataStream (5.12) to read QPalette objects from a file
written by 5.9 (<5.11), the processing results are inconsistent.
Fixes: QTBUG-74885
Change-Id: I14d57f9603a26e5890b4fd57c7e464c5b38eb3f2
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Skip based on support for window activation instead of platform. Makes it clear
why the tests are skipped, and also enables them automatically if we implement
a shell extension that adds support for it.
Task-number: QTBUG-66849
Change-Id: I322aba5ce5f8db651db7b71f223ffacec037c920
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Up until now, the QShaderGenerator would create temporary variables
for uniform, attributes, const. This change makes it use the global
inputs directly rather than relying on the intermediate properties.
Change-Id: Ia9497367d61e536969fe87536606f309c286dbb2
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
GL2/ES2 expect it to be attribute and not in like later versions of OpenGL.
Task-number: QTBUG-74829
Change-Id: Iddd22386ed315d6e6843d8225e49a4b73b6ad9ba
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Without this change, the target of a symbolic link that points to a UNC
share would include UNC in the target path, and not be correctly made
absolute.
Add a relevant test case, and use the opportunity to factor out the
helper code that creates NTFS symlinks into a function that takes
care of error handling.
The file created with the new test case only gets cleaned up correctly
when passing the file path into QDir::rmdir, which is either way the
right thing to do.
[ChangeLog][QtCore][QFileInfo] Fixed resolving of symbolic links to UNC
shares on NTFS file systems.
Change-Id: I9ba75d627aedf7c4cc289f0cb71088d795d30d8a
Fixes: QTBUG-73688
Task-number: QTBUG-63970
Task-number: QTBUG-30401
Task-number: QTBUG-20791
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QMetaObject::newInstance returns a QObject, thus it's not possible to
create a new instance of a Q_GADGET using this function. Previously, we
returned a non-null QObject pointer for such scenarios, which then
leads to crashes when one tries to use it. Now, we check whether the
meta object inherits QObject's meta object, and error out early
otherwise.
Change-Id: I7b1fb6c8d48b3e98161894be2f281a491963345e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The first replacement had missed objective-C++ code some places ourside
the src dir.
In C-files Q_DECL_NOTHROW is replaced with Q_DECL_NOEXCEPT as we still
need to turn it off when compiled in C mode, but can get rid of the old
NOTHROW moniker.
Change-Id: I6370f57066679c5120d0265a69e7e378e09d4759
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Can be used to make smaller binaries, and possibly speed up ARGB32
rendering on some platforms.
Change-Id: I7647b197ba7a6582187cc9736b7e0d752bd5bee5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Extend the history by a persistent model index list
reflecting the selection.
[ChangeLog][QtWidgets][QFileDialog] The widgets-based dialog now
remembers the selected files when navigating the history
Fixes: QTBUG-71415
Change-Id: I86774439be070c1b922acd0e9a27d029f02f68d3
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
to test different h2 modes: "h2c" (clear text with protocol upgrade),
"h2" (encrypted, negotiating via ALPN extension), "h2-direct" (encrypted,
no ALPN), "h2c-direct" (plain text, no protocol upgrade). This patch-set
is an amendment to the recent fix in the protocol handler where we were
crashing in "h2c-direct" mode.
Change-Id: I3ff5ed1396a59b72b59a95f927d404ccd202d0b8
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The test changes the current directory to the test directory
in fromUserInputWithCwd(), but did not restore it, causing:
Totals 898 passed, 0 failed, 1 skipped, 0 blacklisted, 368ms
********* Finished testing of tst_QUrl *********
QTemporaryDir Unable to remove "C:\\TEMP\\tst_qurl-ryVxqu" most likely due to the presence of read-only files.
Restore the old directory at the end to fix this.
Change-Id: I62669868f3c6d97dd38ebac76515428c14b7e1e7
Reviewed-by: David Faure <david.faure@kdab.com>
QTimer::singleShot is optimized for zero timeouts when using the API
taking a string method name. This optimization was not used for the API
taking a PMF or functor. This patch adds it, making the various API
calls behave similarly from a performance point of view.
The approach taken here requires a QObject context object. If none is
available, e.g. a nullptr was passed explicitly, or the
QTimer::singleShot(O, Functor) API was used, the optimization could
not easily be applied. This is not only bad from a performance POV,
but also poses as a potential source for heisenbugs: Using the
different API versions of QTimer::singleShot would use different code
paths internally, which then would not ensure the expected slot call
order. This problem actually existed already when mixing the
string-based slot syntax with PMF/functors in the QTimer::singleShot
API.
This patch overcomes this hurdle and fixes all of the above: When we
encounter a 0ms single shot timer, and no QObject context object is
available, we fall back to the main thread, or create a temporary
QObject for any other thread. The updated and extended benchmark
shows that this is still a significant performance improvement
over using a timer:
********* Start testing of qtimer_vs_qmetaobject *********
Config: Using QtTest library 5.14.0, Qt 5.14.0 (x86_64-little_endian-lp64 shared (dynamic) release build; by GCC 8.2.1 20181127)
PASS : qtimer_vs_qmetaobject::initTestCase()
PASS : qtimer_vs_qmetaobject::bench(singleShot_slot)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_slot":
7.48 msecs per iteration (total: 748, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_pmf)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_pmf":
7.20 msecs per iteration (total: 720, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_functor)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_functor":
6.79 msecs per iteration (total: 679, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_functor_noctx)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_functor_noctx":
6.92 msecs per iteration (total: 693, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_string)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_string":
7.34 msecs per iteration (total: 735, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_pmf)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_pmf":
6.90 msecs per iteration (total: 690, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_functor)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_functor":
6.62 msecs per iteration (total: 662, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_slot)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_slot":
7.45 msecs per iteration (total: 745, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_pmf)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_pmf":
7.46 msecs per iteration (total: 747, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_functor)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_functor":
6.70 msecs per iteration (total: 671, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_functor_noctx)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_functor_noctx":
13.75 msecs per iteration (total: 1,376, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_string)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_string":
7.05 msecs per iteration (total: 706, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_pmf)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_pmf":
6.70 msecs per iteration (total: 670, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_functor)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_functor":
6.58 msecs per iteration (total: 658, iterations: 100)
PASS : qtimer_vs_qmetaobject::cleanupTestCase()
Totals: 16 passed, 0 failed, 0 skipped, 0 blacklisted, 20977ms
********* Finished testing of qtimer_vs_qmetaobject *********
Without the change to qtimer.cpp, the results are:
********* Start testing of qtimer_vs_qmetaobject *********
Config: Using QtTest library 5.14.0, Qt 5.14.0 (x86_64-little_endian-lp64 shared (dynamic) release build; by GCC 8.2.1 20181127)
PASS : qtimer_vs_qmetaobject::initTestCase()
PASS : qtimer_vs_qmetaobject::bench(singleShot_slot)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_slot":
7.45 msecs per iteration (total: 745, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_pmf)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_pmf":
112.84 msecs per iteration (total: 11,285, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_functor)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_functor":
115.62 msecs per iteration (total: 11,563, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_functor_noctx)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_functor_noctx":
110.81 msecs per iteration (total: 11,082, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_string)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_string":
7.04 msecs per iteration (total: 704, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_pmf)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_pmf":
6.62 msecs per iteration (total: 662, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_functor)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_functor":
6.62 msecs per iteration (total: 662, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_slot)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_slot":
7.45 msecs per iteration (total: 746, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_pmf)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_pmf":
118.42 msecs per iteration (total: 11,842, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_functor)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_functor":
119.35 msecs per iteration (total: 11,936, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(singleShot_functor_noctx)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"singleShot_functor_noctx":
130.96 msecs per iteration (total: 13,096, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_string)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_string":
8.08 msecs per iteration (total: 808, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_pmf)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_pmf":
6.79 msecs per iteration (total: 680, iterations: 100)
PASS : qtimer_vs_qmetaobject::benchBackgroundThread(invokeMethod_functor)
RESULT : qtimer_vs_qmetaobject::benchBackgroundThread():"invokeMethod_functor":
7.49 msecs per iteration (total: 749, iterations: 100)
PASS : qtimer_vs_qmetaobject::cleanupTestCase()
Totals: 16 passed, 0 failed, 0 skipped, 0 blacklisted, 153995ms
********* Finished testing of qtimer_vs_qmetaobject *********
Additionally, this patch adds a unit test to verify that the slot call
order for 0ms single shot timers is followed while mixing the various
API versions. It fails without this patch but passes now.
Finally, another test is added to verify that using QTimer::singleShot
before a QCoreApplication was constructed is still working properly.
Change-Id: I0d6211554b6198cb3e527be9ec3adc572b1b54ee
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Until now, QEasingCurve was not streaming all it's internal state.
Therefore, doing store/reload operation through QDataStream would not
yield the same curve as the original. This patch fixes it.
[ChangeLog][QtCore][QEasingCurve] QEasingCurve now properly streams all
the data needed to QDataStream.
Change-Id: I1619501f5b4237983c8c68e148745a5e58863f55
Fixes: QTBUG-68181
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Removes handling of missing Q_COMPILER_NULLPTR, Q_COMPILER_AUTODECL,
Q_COMPILER_LAMBDA, Q_COMPILER_VARIADIC_MACROS and
Q_COMPILER_AUTO_FUNCTION.
We haven't supported any compilers without these for a long time.
Change-Id: I3df88206516a25763e2c28b083733780f35a8764
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Includes a fixup for 03fadc26e7, which
removed the check on empty transition list, needed when no data are
available. Ensured that such a data-free zone would in fact be
noticed as invalid during init().
Fixed handling of times before the epoch (we still want to consult a
POSIX rule, if that's all that's available) while ensuring we (as
documented) ignore DST for such times.
Fixed handling of large times (milliseconds since epoch outside int
range) when looking up POSIX rules. Gave QTimeZonePrivate a YearRange
enum (to be moved to QTimeZone once this merges up to dev) so as to
eliminate a magic number (and avoid adding another). Moved
year-munging in POSIX rules after the one early return, which doesn't
need the year range.
Added test-cases for the distant past/future (just checking UTC's
offsets; SLES has a minimal version of the UTC data-file that triggers
the bugs fixed here for them).
Fixes: QTBUG-74666
Fixes: QTBUG-74550
Change-Id: Ief7b7e55c62cf11064700934f404b2fc283614e1
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Enum class are serialized using the declared size.
[ChangeLog][QtCore][QDataStream] Enumerations can now
be serialized through QDataStream without the need of
manually defining streaming operators.
Change-Id: Iae9a63eb62b5a5615b657766a3c4c66ba4d98d0e
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Paolo Dastoli <paolo.dastoli@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Hardcoding IP addresses and their respective DNS records is fragile.
We care about Qt producing the same result as other DNS querying tools,
so testing that instead.
Running a python script for this is easiest, and assumed to be quite
reliable.
In case where python fails/is not present, fall back to nslookup.
That tool is available on Linux, macOS, and Windows, although the
output it produces varies. This change implements very basic
line-parsing that can interpret the various results encountered
during testing on those platforms.
This also reverts commit bbaceff253fae13d8e56691bc9de7e1981db5118,
which blacklisted the tests that failed due to changes in DNS
records.
Use the opportunity to replace usage of gitorious.org.
Change-Id: I967de226bd603c805df7fe3ed4e871d92d2d0750
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
In Korean text, they typically can use both the "Western" style of
word wrapping, i.e. breaking on spaces, as well as the East-Asian
style of potentially breaking between all syllables. However,
the Unicode Line Breaking Algorithm, TR14 defaults to breaks on
syllables and specifies a possible tailoring where Hangul is
mapped to the AL class instead:
"When Korean uses SPACE for line breaking, the classes in rule
LB26, as well as characters of class ID, are often tailored to AL"
When using Qt, the user would expect the WordWrap wrap mode to
break between words in Korean. If you want the syllable-based
text layout, you would use WrapAnywhere, probably accompanied
by line justification.
To avoid breaking QTextBoundaryFinder and other potential clients
of QUnicodeTools which depend on getting the precise Unicode
data from the algorithm, we do this by passing a flag from
QTextEngine when initializing the attributes. This way, it
can also be made optional later on, if we decide there is
a reason to add an additional wrap mode specifically to
handle cases like this.
[ChangeLog][Important Behavioral Change] WrapWord now
correctly prefers line breaks between words in Korean text.
WrapAnywhere can still be used to get breaks between syllables
instead.
Done-with: Alexey Turitsyn <alexey.turitsyn@lge.com>
Task-number: QTBUG-47644
Change-Id: I37b45cea2995db7fc2b61e3a0cc681bbdc334678
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
- Remove unused dummyWidget and thus empty slots initTestCase(),
cleanupTestCase().
- Add slot cleanup() checking for an empty top level widgets list
and introduce QScopedPointer to ensure it passes.
- Use QTRY_VERIFY in hideAndShowOnWindowStateChange().
Flakyness has been observed on openSUSE:
FAIL! : tst_QSizeGrip::hideAndShowOnWindowStateChange(Qt::Window) '!sizeGrip->isVisible()' returned FALSE. ()
Loc: [tst_qsizegrip.cpp(126)]
Change-Id: I340fc1892dc00bcff1985e5a8a1e535975736484
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
The test was never used or compiled, it has to be fine to add it :-)
Change-Id: If210c19515a545a6dbaef18a16dc018c0348070d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
More specifically, for masks and rotated images.
Add tests for it, also add tests that image metadata is
forwarded for converted and copied images.
Fixes: QTBUG-49259
Change-Id: I05d4a468b17f53a2625500b871c01b2c53b981a1
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Also add a test checking that devicePixelRatio is forwarded to
derivatives of QPixmap.
Change-Id: Idb2b3f033ccc0fd49bf54b11f5dffbce5a19b006
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
A string can parse as a non-zero double that's smaller than the
smallest float yet be a faithful representation of the smallest float.
So rather than testing for non-zero doubles less than the smallest
float, test for non-zero doubles that cast to float zero; these
underflow. This means small values close below the smallest float
shall round up to it, rather than down to zero, requiring a tweak to
an existing test. Added a test for the boundary case (and tidied the
test data).
Fixes: QTBUG-74833
Change-Id: I4cb30b3c0e54683574b98253505607caaf88fbfb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Various patterns seem to have been copied, notably counting time from
QTime(0, 0) rather than using QTime::msecsSinceStartOfDay() and its
setter. Unsuitable value types also put in an appearance, and
QTime()'s parameters after the first two default to 0 anyway.
Corrected a lie in QTime()'s default constructor doc; it does not work
the same as QTime(0, 0) at all.
Change-Id: Icf1a10052a049e68fd0f665958f36dbe75ac46d5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is done by adding a QWindowPrivate::allowsClickThrough() function,
so this could easily be adapted later on if desired for other
platforms.
Fixes: QTBUG-41126
Change-Id: I1157e5e7e7667ff11d1a5d21b3ce8c4b13202272
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The QBrush constructor taking a QGradient would assert or crash if
passed a null (NoGradient) gradient. But it is not necessary for the
API to be as brittle as that: instead the result can simply be a null
QBrush object, i.e. the same as the default QBrush() constructor
creates (style == NoBrush).
This issue comes up now since with the recent introduction of
QGradient presets, the API opens for using QGradient directly, whereas
earlier, only the subclasses QLinearGradient etc. were to be used.
Fixes: QTBUG-74648
Change-Id: I1a9b1c4654e4375aa6684700a262cc0946851448
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
For applications that set VERSION the installation targets of pdb
files were wrong in qmake's nmake Makefile generator.
Replace code that tries to reconstruct that target's versioned
extension with TARGET_EXT which already contains the fully resolved
target extension.
Fixes: QTBUG-74265
Change-Id: I9553a5f70170e077a59c866079ae51647ae80bef
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
TestMethods::invokeTest() has an outer loop on global data (albeit
with a comment that said otherwise). On its first cycle, we run the
test function's *_data() method, if it has one; there is an inner loop
on the rows this created. If the *_data() QSKIP()s, we need to skip
the whole test; otherwise, a QSKIP() in one sub-test should not lead
to skipping the remaining sub-tests.
Moved the check for *_data() QSKIP()ping to right after *_data()
returns, inside the "first global cycle" block that runs it.
Previously, this check was done before entering the loop on local data
rows, but outside that "first global cycle" block: consequently, later
global cycles would fall foul of this check (even though the *_data()
hasn't been run in this cycle, much less QSKIP()ped in it) if the last
sub-test of the previous global cycle had QSKIP()ped.
When running a single test for one specific data row, if the test's
*_data() QSKIP()ped, this misplaced check would also have lead to a
misleading "Unknown testdata" warning.
Changed testlib/selftests' tst_globaldata::skipSingle() to trigger the
bug (by having its last local row of first global row skip, which
caused the second global row to be omitted) to verify this is also
fixed; and amended one of its comments to reflect what's now to be
expected. Updated the test's expected output files.
Task-number: QTBUG-61774
Change-Id: I99596b595c6d1184038f23383844c6ff51a0cd91
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Put all connections that get disconnected into a singly
linked orphaned list.
Whenever the refcount on the connectionData drops down to
one, this list can safely be cleared, even with the planned
removal of locking in activate().
Use an id integer in the connection to acoid activating newly
added connections.
Fixes: QTBUG-72649
Change-Id: Ide3d116ae7fc9ca497598c1c2b71d43b4339c92d
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The DNS entry for the host has changed, dig answers with dns.google,
not with google-public-dns-a.google.com. While developing a proper
fix to the test, blacklisting this particular lookup allows
integrations to pass in the meantime.
Change-Id: Id37da6b24554803bf4e2c84be5b949ded40566e8
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The test was added as commented in 2012, before it was not even
mentioned in the pro file. I guess it was never run.
Change-Id: Ib787c7811ab4f7f32a99869167cde2e12dbe3156
It is constantly passing according to grafana.
Change-Id: I4953cd54e27adde8dad79e9a0f025960802e6c7a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Fixed the other tests that used the methods, so that they now get the
data from QLocale instead; and added the missing feature #if-ery, as
these are textdate methods.
Change-Id: I896f356bdf88037db23590c71d0aeb0b8722bfa7
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
The code had min and max of an integral type and tested min + min / 2,
which naturally overflowed, provoking a compiler warning. The test
was meant to be testing min - min / 2; but min is even, so this is
just min / 2; and doubling that won't overflow (which is what the test
is about). As it happens, min + min / 2 is in fact max - max / 2,
which *would* be a good value to test, since max is odd. So add a
test for that and remove the broken test.
Change-Id: Iec34acbf0d5d7993d41ff844875dc10480b8eb1f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In particular, document the mis-behavior it takes for granted in one
test. Renamed some variables so that they're visually distinct from
one another and actually mean something intelligible. Renamed the
sub-tests to say what's actually happening. Reading the test output
now at least makes it possible to see what's wrong. I'll fix that in
a later commit.
Task-number: QTBUG-61774
Change-Id: I3e5f83b8baa3c6afbca9231b5bbc89d17f3e57e2
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Don't just wait for 300ms for the thread to finish, this can
lead to faling tests esp. on slow hardware.
Also fix a mem leak.
Change-Id: Ifa90da5507fc6d65ef77e368d7c238271623ff53
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
It has been completely untested for a while and saw some breakage.
So let's add a selftest for it. ('-vs' when running tests)
Change-Id: Ibfb5ac0a2d741de7c3f519d91202d4977996045e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Use move on the existing value as well so the constructor makes more
of a difference.
Change-Id: Iee2080da7b7d2d88eb108f0448c61423c7256979
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This benchmark was not compiled, and it only covered some parts of the
API. Enable it, and also measure the performance of PMF and Functor API
variants, for both QTimer::singleShot and QMetaObject::invokeMethod.
This uncovers that the zero-timeout optimization for the singleShot is
not applied to the PMF and Functor API variants:
********* Start testing of qtimer_vs_qmetaobject *********
Config: Using QtTest library 5.11.0, Qt 5.11.0 (x86_64-little_endian-lp64 shared (dynamic) release build; by GCC 7.2.1 20171224)
PASS : qtimer_vs_qmetaobject::initTestCase()
PASS : qtimer_vs_qmetaobject::bench(singleShot_slot)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_slot":
5.20 msecs per iteration (total: 520, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_pmf)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_pmf":
75.93 msecs per iteration (total: 7,594, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_functor)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_functor":
77.90 msecs per iteration (total: 7,790, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(singleShot_functor_noctx)
RESULT : qtimer_vs_qmetaobject::bench():"singleShot_functor_noctx":
76.23 msecs per iteration (total: 7,624, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_string)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_string":
4.99 msecs per iteration (total: 499, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_pmf)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_pmf":
5.37 msecs per iteration (total: 538, iterations: 100)
PASS : qtimer_vs_qmetaobject::bench(invokeMethod_functor)
RESULT : qtimer_vs_qmetaobject::bench():"invokeMethod_functor":
4.74 msecs per iteration (total: 474, iterations: 100)
PASS : qtimer_vs_qmetaobject::cleanupTestCase()
Totals: 9 passed, 0 failed, 0 skipped, 0 blacklisted, 50220ms
********* Finished testing of qtimer_vs_qmetaobject *********
Change-Id: I46336613188317124804638627f07eb135dc0286
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
DragEnter events always should start with the default state, which
is accepted = false. This was a copy-and-paste error introduced by
f8944a7f07.
Fixes: QTBUG-73977
Change-Id: I34b3ea97c9b4f4fc040a9e6f1befd6124533361d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QDoubleSpinBox did not resize when setPrefix() was called because the
cached size hint was not reset.
Fix it by resetting the cached size hints and update the geometry the
same way it's done for QSpinBox::setPrefix().
Fixes: QTBUG-74520
Change-Id: I6f42a24ab0a4ce987ecbe1505a634d929474436b
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
In this threaded setup the server can sometimes have the data before it
calls "waitForReadyRead", what happens then is that we fail the wait and
as a result the test fails overall.
Let's check if we actually got some data after all and then continue if
we did. Since both the client and the server currently wait the same
amount of time (2s) the max timeout for the client was increased by
0.5s so it has some time to notice that the server got the message.
Change-Id: Ib5915958853413047aa5a7574712585bcae28f79
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
And export the required symbols in OpenSSL so we can run the test there
as well even if it's not needed for any functionality.
Change-Id: I4246d2b0bbdd42079d255f97f3c66ce8bb37390b
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QSqlError::text() returns single space if QSqlError is not valid. In
addition, it adds space in case one of driverText or databaseText
is empty.
Change condition upon which space is added between databaseText and
driverText, and update unit test to cover these cases.
Fixes: QTBUG-74575
Change-Id: I52cce9b0287a523d7ff9059cff38bcd8b26eb303
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
When using a style that wants to draw into the layout's margin (like
macOS style does with group box titles), parts of the widgets would be
clipped by the parent if the available margin is smaller than necessary.
This moves the x/y coordinates to at least 0/0, and adjusts width and
height accordingly.
[ChangeLog][QtWidgets][QLayout] Prevent clipping of group box titles
on macOS (and similar styles that draw into layout margins)
Change-Id: I32148a92858c13fb2325da4d0a2a58996e0e8930
Fixes: QTBUG-67608
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
[ChangeLog][QtCore] Added support of deduction guides for QPair
Change-Id: I41a798390dc2c925b0f8432ba12aa345724de2d7
Reviewed-by: Martin Smith <martin.smith@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
They are the only Qt symbols neither prefixed with q or with the Qt
namespace. This changes preserves source and binary compatibility
while making it possible to define conflicting symbols.
Change-Id: I6d4181206e63faa922fa0c8b644e0a4b88826a97
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The test is flaky which was uncovered by the upcoming
QTimer::singleShot optimization patches:
When the Emitter's thread is started and executes the timout functor
before the state machine is started, then the state machine will never
see the emitSignalWithNoArg signal and thus never transition to the
final state and finish.
This patch ensures that the code in the background thread is only run
after the state machine was started to fix this flakyness.
Change-Id: I6f91a2420165662ece75e550a6d73fe098137d4c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
LRESULT on Windows 64 is a 64bit type, adapt filter functions of
QAbstractNativeEventFilter and QAbstractEventDispatcher accordingly.
Fixes: QTBUG-72968
Change-Id: Ie53193e355f0b8e9bd59fa377f43e2b4664a2ded
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Initially TESTSERVER_COMPOSE_FILE could be manually specified.
Later this got removed by accident. Re-enable this feature.
Furthermore, check if a module has a platform-specific compose file. If
not, fall back to a default docker-compose.yml. This is useful to
include testserver.pri from other modules, where no platform-specific
requirements are present, ie the image from provisioning works on all
platforms.
Change-Id: Icb92552fd61196be332b2431ab0f8a43b9157fc8
Reviewed-by: Ryan Chu <ryan.chu@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
In the QNetworkAccessManager machinery we would treat "no-cache" as if
it meant "don't cache" while in reality it means "don't return these
cached elements without making sure they're up-to-date"
At the same time as this change is made let's add test data for
"no-store", which replaces the "no-cache" test data.
Fixes: QTBUG-71896
Change-Id: Ieda98f3982884ccc839cac2420c777968c786f6e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mikhail Svetkin <mikhail.svetkin@qt.io>
It can happen that QDataStream is fed a QVariant that contains a QPixmap
representation, that will make the application crash when trying to
restore it
This is specially important for cases in which applications expose dbus
interfaces with QVariantMaps
Change-Id: Ife4feaef30f30e7e27d88464bd6b2a247f743123
Reported-by: Fabian Vogt <fabian@ritter-vogt.de>
Reviewed-by: Fabian Vogt <fabian@ritter-vogt.de>
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Recurse down the sibling at column 0 of the index instead down the
index.
Change-Id: Ie78d8b28eab7438ca3f83ee0df177115ca82806e
Fixes: QTBUG-73864
Reviewed-by: David Faure <david.faure@kdab.com>
While an invalid time-zone shall have no transitions, so may various
constant zones, like UTC. The TZ data may include only the POSIX rule
for such a zone, in which case we should use it, even if there are no
transitions.
Broke out a piece of repeated code as a common method, in the process,
since I was complicating it further.
Added test for the case that revealed this; and made sure we see a
warning if any of the checkOffset() tests gets skipped because its
zone is unsupported.
Fixes: QTBUG-74614
Change-Id: Ic8e039a2a9b3f4e0f567585682a94f4b494b558d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Set object names on the widgets in restoreState(), fixing:
QWARN : tst_QMainWindow::restoreState() QMainWindow::saveState(): 'objectName' not set for QDockWidget 0x7ffcb45e5e00 ';
QWARN : tst_QMainWindow::restoreState() QMainWindow::saveState(): 'objectName' not set for QToolBar 0x7ffcb45e5dd0 ''
QWARN : tst_QMainWindow::restoreState() QMainWindow::saveState(): 'objectName' not set for QDockWidget 0x7ffcb45e5e00 ';
QWARN : tst_QMainWindow::restoreState() QMainWindow::saveState(): 'objectName' not set for QToolBar 0x7ffcb45e5dd0 ''
Task-number: QTBUG-74242
Change-Id: I19f19e93de9df00d001b820a31836ce0b3cd2877
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
[ChangeLog][QtCore][QVariant] Fixed a bug that caused isNull() to be
true after downcasting a QObject* payload using convert().
Fixes: QTBUG-73196
Change-Id: Ifda15952f873d7142c95609b69ac424bbf16b723
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Introduce a logging category for the qDebug()-output.
Add a meta type registration for QList<QPersistentModelIndex>, fixing
numerous warnings like:
WARN : tst_QItemModel::remove(QStandardItemModel:invalid start, valid count 5) QSignalSpy: Unable to handle parameter 'parents' of type 'QList<QPersistentModelIndex>' of method 'layoutChanged', use qRegisterMetaType to register it.
Fix a Clang warning about potential misuse of operator ,
Task-number: QTBUG-73864
Change-Id: I60998403a44f5df8767926951ee13d1ed1e93c37
Reviewed-by: David Faure <david.faure@kdab.com>
If this callback is not set then OpenSSL will call the callback
used for <= TLS 1.2 unconditionally when connecting. If using PSK it
will call it again later once the preshared key is needed.
We don't currently handle the TLSv1.3 PSK, but we definitely should.
But for now we can work around it - when psk_use_session_callback is
called we simply change the PSK callback to a dummy function whose only
purpose is to restore the old callback.
This is mostly done to keep behavior the same as it is now for users
(and to keep our tests running).
Later we can add a new signal and handle this new feature properly.
Task-number: QTBUG-67463
Change-Id: I4aca4ae73ec4be7c4f82a85e8864de103f35a834
Reviewed-by: Simo Fält <simo.falt@qt.io>
In this threaded setup the server can sometimes have the data before it
calls "waitForReadyRead", what happens then is that we fail the wait and
as a result the test fails overall.
Let's check if we actually got some data after all and then continue if
we did. Since both the client and the server currently wait the same
amount of time (2s) the max timeout for the client was increased by
0.5s so it has some time to notice that the server got the message.
Change-Id: Ib5915958853413047aa5a7574712585bcae28f79
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
(cherry picked from commit e79b1dcdf5)
Reviewed-by: Simo Fält <simo.falt@qt.io>
We use global object to store errors found by q_X509Callback.
Thus, we also use a lock/mutex. It would appear all tests
involving in-process server and QNAM are prone to intermittent
failures on our Windows VMs - it's always about timeouts due
to the client socket (QNAM) locking and the server socket blocking
main thread while trying to acquire the same lock.
The real fix is to get rid of global variable/locking, we'll
have it later (quite a change and requires a lot of accuracy).
Task-number: QTBUG-76247
Change-Id: Iffc90d9e16783f17f62e836e01c35f22681bdd39
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
(cherry picked from commit 91ab70d17f)
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
The code for generating round line joins is optimized with a shortcut
for the inner, normally invisible joins. For certain joins of a
tightly turning bezier, this optimization would lead to visible
painting error. Fix by avoiding the optimization if the next control
point is so close as to allow such tight turns.
As a driveby, make the angle > 90 test cheaper, since absolute
precision is not required in the optimization choice.
Fixes: QTBUG-75008
Change-Id: I293e0776003310dc36fa7f43fbcd9c25f1f8fa5d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
@3x is in use on iOS already, so extend the handling in QImageReader
to all single-digit factors, like QIcon does.
Fixes: QTBUG-76273
Change-Id: Ic9442731c0549dbe8f797e1ddb1a09d8447e8441
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Fix test for systems that do not resolve their hostname to localhost.
Not using name resolution also makes the test more robust.
Change-Id: I558b9a975b9021536709db87fbf6a3b314f7ca79
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Copy the test data into a temporary directory and do all the work there
without tainting the source directory. More importantly, do not pull in
any settings from the Qt build to test what actual users will encounter.
Change-Id: I793b86bfadb7597efb47c8f2d3fc863384c78a79
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
A QCOMPARE(..., true) isn't much use; and failure would have set the
object's .errorString(), which seems like it'd be worth reporting, so
use QVERIFY2() instead.
Change-Id: I2f3f9379984694891de81d2ffebc696d91eec70f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The rules of std don't permit us to add an overload for
fpclassify(qfloat16), so we need our own equivalent that we *can*
overload. Deploy it in the few places we use fpclassify().
Extended qnumeric's testing to cover qFpClassify().
Change-Id: Ie5a0a5cc24599d1571404c573d33c682b0d305a5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Renamed the test, since it covers both, verified slightly more and
added checks that QCOMPARE() copes as intended. Fixed some minor
coding-style defects in the process.
Change-Id: I49c2ffa0568a29e9e4b7f7395d4cacdeb0401da0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When set to ExclusiveOptional, the new exclusionPolicy property let the
user uncheck the active checkable action in an exclusive group.
[ChangeLog][QtWidgets][QActionGroup] Added new exclusionPolicy
property. Set it to ExclusiveOptional to allow unchecking the active
checkable action in an exclusive group.
Change-Id: I61a9885cfd076d631cddf8c08313e4b488e5dc38
Fixes: QTBUG-71160
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
androidtestrunner is a tool needed to run qt tests on Android.
Now you can run tests as simple as you run them on Linux, macOS,
Windows.
"$ make check" it's all you need to run tests on the default android
device.
ANDROID_DEVICE_SERIAL env variable can be used to use a specific android
serial.
Use cases:
$ make -j1 check
-j1 is needed to make sure we don't run multiple tests in parallel.
$ ANDROID_DEVICE_SERIAL="emulator-5554" make check
Run the test on "emulator-5554"
$ make TESTARGS="-- -xml" check
Switch to xml output. All params after -- are passed to test
application.
$ make TESTARGS="-- -o out.xml,xml -o out.txt,txt -o -,tap -vs" check
Create two files out.xml and out.txt in the current folder and print
"tap" format to stdout and enable logging of every signal emission.
[ChangeLog][Android] Make it easy to run Qt tests on Android.
"$ make check" is all it's needed to run a test on an Android device.
Change-Id: I1a7f64b62608f7367b5a6aabf5d6c6e7e50242e6
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Wait for the result at the target index if the future
is running and the iterator index is past the current
result count.
Determine if there is a result at the target index
after waitForResult() returns, and return -1/end if
not.
Also support decrementing the end iterator. In this
case wait for the future to finish in order to get
the final result count.
Task-number: QTBUG-59811
Change-Id: I8fcc711bab2e72c3c5196a55b794d25e18bb324d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Comes with backends for Vulkan, Metal, Direct3D 11.1, and OpenGL (ES).
All APIs are private for now.
Shader conditioning (i.e. generating a QRhiShader in memory or on disk
from some shader source code) is done via the tools and APIs provided
by qt-labs/qtshadertools.
The OpenGL support follows the cross-platform tradition of requiring
ES 2.0 only, while optionally using some (ES) 3.x features. It can
operate in core profile contexts as well.
Task-number: QTBUG-70287
Change-Id: I246f2e36d562e404012c05db2aa72487108aa7cc
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
... except where they are actually the component under test.
Java-style iterators are scheduled for deprecation.
Change-Id: If4399f7f74c5ffc0f7e65205e422edfa1d908ee8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
- Fix qmake build
- Fix QtNetwork moc-ing, by including the moc files
inside the cpp files
- Fix sql odbc plugin by including QT_PLUGIN define
- Fix Boostrap to link against the Platform target, to get the
correct Unicode and WIN64 defines.
- Fix vulkan headers to be found
- Fix freetype bzip and png unresolved symbols / linker issues
when building minimal platform plugin (also need to make
sure to use the vcpkg toolchain instead of CMAKE_PREFIX_PATH
because then find_package is overridden, which does magic
to properly propagate static library dependencies).
- Fix qfilesystementry test not to be built without private
tests feature (it led to undefined symbols issues).
- Make sure to remove QT_NO_CAST_TO_ASCII define when building
QtCore, so that the qstringbuilder3 test builds
successfully.
Task-number: QTBUG-74140
Change-Id: I353d08392b604d55f8e62cdd8696d1e19a3c084a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Set AA_UseHighDpiPixmaps.
Task-number: QTBUG-52622
Change-Id: Ic4373a9c94952f50bc1ad36bcc0dec850efc124a
Reviewed-by: Robert Loehning <robert.loehning@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When the toolbar was moved from one position to another it could end up
increasing the size of the saveState data due to extra lines. This
removes any needless ones that should not be included.
Change-Id: I1c5d094ae1405d6a82db5fcdc3cd081904706837
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
While touching the code, deduplicate some methods.
Change-Id: I28f469f0e9ae000a34466b0ecc604b5f3bd09e63
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Needed to disable QT_NO_UNSHARABLE_CONTAINERS, as this
triggers asserts.
QMetaType also has some Qt 6 specific code disabled to
get things to compile.
Fix various details in autotests to accommodate for
the changes with Qt 6.
Add a workaround for black lists on macos, where
QSysInfo::productType() now returns 'macos' and not
'osx' anymore.
Change-Id: Ie26afb12a2aac36521472715934a7e34639ea4d0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Can now detect nested quotes and code blocks inside quotes, and can
rewrite the markdown too.
QTextHtmlParser sets hard-coded left and right margins, so we need to do
the same to be able to read HTML and write markdown, or vice-versa,
and to ensure that all views (QTextEdit, QTextBrowser, QML Text etc.)
will render it with margins. But now we add a semantic memory too:
BlockQuoteLevel is similar to HeadingLevel, which was added in
310daae539 to preserve H1..H6 heading
levels, because detecting it via font size didn't make sense in
QTextMarkdownWriter. Likewise detecting quote level by its margins
didn't make sense; markdown supports nesting quotes; and indenting
nested quotes via 40 pixels may be a bit too much, so we should consider
it subject to change (and perhaps be able to change it via CSS later on).
Since we're adding BlockQuoteLevel and depending on it in QTextMarkdownWriter,
it's necessary to set it in QTextHtmlParser to enable HTML->markdown
conversion. (But so far, nested blockquotes in HTML are not supported.)
Quotes (and nested quotes) can contain indented code blocks, but it seems
the reverse is not true (according to https://spec.commonmark.org/0.29/#example-201 )
Quotes can contain fenced code blocks.
Quotes can contain lists. Nested lists can be interrupted with
nested code blocks and nested quotes.
So far the writer assumes all code blocks are the indented type.
It will be necessary to add another attribute to remember whether the
code block is indented or fenced (assuming that's necessary).
Fenced code blocks would work better for writing inside block quotes
and list items because the fence is less ambiguous than the indent.
Postponing cursor->insertBlock() as long as possible helps with nesting.
cursor->insertBlock() needs to be done "just in time" before inserting
text that will go in the block. The block and char formats aren't
necessarily known until that time. When a nested block (such as a
nested quote) ends, the context reverts to the previous block format,
which then needs to be re-determined and set before we insert text
into the outer block; but if no text will be inserted, no new block
is necessary. But we can't use QTextBlockFormat itself as storage,
because for some reason bullets become very "sticky" and it becomes
impossible to have plain continuation paragraphs inside list items:
they all get bullets. Somehow QTextBlockFormat remembers, if we copy it.
But we can create a new one each time and it's OK.
Change-Id: Icd0529eb90d2b6a3cb57f0104bf78a7be81ede52
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
- QObjects are always passed by pointer not by reference, by convention
- writeTable() takes QAIM rather than QATM to make testing via
QStandardItemModel possible in the future
Change-Id: I5bc6b8cd9709da4fb5d57d98fa22e0cb34360944
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Importer fixes:
- the first list item after a heading doesn't keep the heading font
- the first text fragment after a bullet is the bullet text, not a
separate paragraph
- detect continuation lines and append to the list item text
- detect continuation paragraphs and indent them properly
- indent nested list items properly
- add a test for QTextMarkdownImporter
Writer fixes:
- after bullet items, continuation lines and paragraphs are indented
- indentation of continuations isn't affected by checkboxes
- add extra newlines between list items in "loose" lists
- avoid writing triple newlines
- enhance the test for QTextMarkdownWriter
Change-Id: Ib1dda514832f6dc0cdad177aa9a423a7038ac8c6
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Before the patch the notification was emitted only when the docker
was attached to the panel or changed a position on it.
It looks like the old behavior was documented in a unittest,
so this patch might actually be a "behavior change".
Change-Id: Id3ffbd2018a8e68844d174328dd1c4ceb7fa01d3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Users should use range constructors instead to do the conversion.
Keep conversion methods between QList and QVector as these will turn
into a no-op in Qt 6, whereas forcing people to use range constructors
would lead to deep copies of the data.
Change-Id: Id9fc9e4d007044e019826da523e8418857c91283
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This closes one compatibility gap with QList, to make
it easier to replace QList with QVector in Qt6.
Change-Id: I5655bc4cd2150a6f09a1ed68c0742f3b42ca47e4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
ask our users to use the range constructors instead. This will allow
us to remove the include dependency towards <list> and <vector> in
Qt 6.
Change-Id: Id90f2058432e19941de1fa847100a7920432ad71
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This provides the ability to write live data from a table to Markdown,
which can be useful to load it into a text document or a wiki.
But so far QTextMarkdownWriter is still a private class, intended to be
used experimentally from QtQuick and perhaps later exposed in other ways.
Change-Id: I0de4673987e4172178604e49b5a024a05d4486ba
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Remove remaining handling of missing support for rvalue refs.
Change-Id: I78bab8bccfeeb9c76f464f345874364a37e4840a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Mimicking what we currently have for QSharedPointer, but also adding
* snake_case version (matching the ones in std)
* rvalue-overloaded versions (matching the C++2a overloads).
[ChangeLog][QtCore][QSharedPointer] Overloads of
qSharedPointerObjectCast have been added to work on std::shared_ptr.
Change-Id: I26ddffd82b000bf876e7c141fdce86a7b8c1d75a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A QTextDocument can now be written out in Markdown format.
- Add the QTextMarkdownWriter as a private class for now
- Add QTextDocument::toMarkdown()
- QTextDocumentWriter uses QTextMarkdownWriter if setFormat("markdown")
is called or if the file suffix is .md or .mkd
- Add QTextEdit::toMarkdown() and the markdown property
[ChangeLog][QtGui][Text] Markdown (CommonMark or GitHub dialect) is now
a supported format for reading into and writing from QTextDocument.
Change-Id: I663a77017fac7ae1b3f9a400f5cd357bb40750af
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>