in order to test for regressions in qdbusxml2cpp too.
Change-Id: Icd2a6f319c5fabf0b0f2a1fe8c70afcd2c84263e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Kevin Ottens <kevin.ottens@kdab.com>
QTreeView actually had a better model than QTableView, but after
previous patches QTableView now has a better one.
This patch makes sizeHintForColumn similar to what QTableView has.
Change-Id: I2f2d35e7aa66fc8990f54e2f4a12d97f490840e5
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Some of sizeHintForColumn is now moved into widthHintForIndex.
(and in QTreeView some of sizeHintForRow into heightHintForIndex)
This makes the code a bit more readable and it prepares some
extensions that will use these functions more. There should
be no semantic changes in this patch.
In releasemode this does not seem to have a performance cost.
(QTableView actually seemed to be a bit faster)
Change-Id: I940432ee01715ce94cd6aab5f3b2aa00dcd19ace
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
In some situations we can get into resizeSections in a hidden
QHeaderView. If the headerView is hidden then we look at all the
rows, and that can be extemely expensive for a large model.
This patch limits the sizeHint with only looking at a maximum
1000 rows. Though this is more inaccurate it is also faster -
and it is not much different from what QTreeView does.
Change-Id: Ief4b54c5a3c5a0db02e8b595c9b9b3162633ee67
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Don't send Qt::Key_unknown down the shortcut handling pipe, because
unknown keys are not part of a shortcut sequence and results in an assert.
Task-number: QTBUG-30871
Change-Id: Idd451fb793bd07124a96d75ed7b936f7ff584f28
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
To allow copying one QPair of two types to a QPair of two different
types.
Change-Id: Ie7aa84cf5a361be6b7d242517578172c35bcacfd
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
A new set of classes is introduced for iterating over the contents
of a container within a QVariant without knowing the exact type of
the container, but with the guarantee that the element type within
the container is a metatype.
The implementation of the iterable interface uses
the stl-compatible container API so that we can also iterate over stl
containers, or any other container which also conforms to stl norms.
This enables the functionality in the bug report.
Task-number: QTBUG-23566
Change-Id: I92a2f3458516de201b8f0e470982c4d030e8ac8b
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This patchs allows the user to convert defined QMetaType types like
MyType to be converted by using e.g. QVariant::toString(), mapping to
MyType::toString(). Also all the other QVariant::toXYZ() methods are
supported so far.
The patch adds static methods QMetaType::registerConverter supporting:
- implicit convertion
- conversion using member method of source type
- conversion using unary functor
Change-Id: I4f1db83d9c78bcc9df5c42f82f95cce0480cdcc3
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Christoph Schleifenbaum <christoph.schleifenbaum@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Breakage was caused by two typos
Change-Id: Ic9ca3a3db8dbf191b3bee8b2ef6e3513f7c9adc4
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Nicolas Arnaud-Cormos <nicolas@kdab.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Provide a new displayIntegerBase property which control the base used
by the spin box to display the value in its internal line edit.
Change-Id: Ibadc37107db8770d757b64350946bf19142e8f6c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This is a spin-off of 00b11cc.
Change-Id: I042f066bdb1d248a04473d4b0a31002330a73907
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Even though the intentions of this warning were good, the warning
was a bit harsh. In addition, in certain circumstances
(like the autotest demonstrates) we could end up calling object()
on an interface where the object was in the destructor. This
could happen because: *after* we got the destroyed() signal, the
widget would still notify the accessibility framework of a FocusOut
event.
Since the code even called object() from isValid(), we could not even
(as a defensive measure to circumvent this issue) check the isValid()
of an interface without getting this warning (duh).
So - for isValid(), the warning is not needed at
all, since the caller will of course check the result of isValid() and
act accordingly.
As for the result of object(), it should always be a pointer, but it
might point to a partially destroyed object. To detect this, you simply
check isValid() first:
if (iface->isValid())
doStuff(iface->object());
Change-Id: I206307fe618806133d8c6bc338c412d0009d7181
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
I also modified tst_QDnsLookup the test to use ';' as a separator as
opposed to spaces because I added MX and SRV records with multiple
RRs.
Change-Id: I62c7b6ad342c1bb23c4d9ac9730e35ab422e3ea2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Take into account the possibility that the target platform plugin does not
support platform services.
Change-Id: I48e7fac2e1230a9a7d450414044d23ed26b334be
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
At the moment if d->m_data == systemData() it calls
systemLocale()->query but forgets about the standalone part
so you get the wrong data
This patch introduces the new enums so that backends can implement
properly the standaloneMonthName feature properly. At the moment the Windows
and Mac ones still return the monthName, the Unix and Blackberry ones return
the data we store in months_data
Change-Id: Idc5a50b04ab1f914f16c7385be1dca2e027feae3
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Mehdi Fekari <mfekari@blackberry.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For bundling Qt, we need two things:
1. We need to build a regular .jar file out of the Java files,
so that they can be built into the app package. Dexing the
classes first (i.e. compiling the JVM bytecode to Dalvik
bytecode) is required for loading the .jar file at run-time,
but cannot be used for building it into the app, so we need
two different paths.
2. We need to specify which extra files have to be bundled for
each module (this is primarily for plugins and imports). This
is because there is no static dependency on these files, so
it cannot be detected during deployment.
Task-number: QTBUG-30751
Change-Id: I733603ee5d1c64bd7c5b9357eb5d993b9d0298f7
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Add the enablers so that Qt Creator (or another
deployment tool) can add a specification in the app's
meta data of which libraries are bundled and the
Java code required to extract plugins and imports into
the required directory structure inside the app's
data directory.
This is intended to be an alternative to using Ministro
for deployment, and the mechanism of extracting
libraries on first startup is a work-around for the
requirement in Qt of having this directory structure.
For Qt 5.2, the approach should be changed to load
plugins directly from the app's lib directory and
the other files in imports will be bundled as qrcs
in the native plugins.
Task-number: QTBUG-30751
Change-Id: Ibdb3a672548b4802f9bf3ecd05fc194426ac30e7
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
KeccakF-1600-opt32.c:497:5: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare]
harfbuzz-thai.c:264:49: error: comparison is always false due to limited range of data type [-Werror=type-limits]
These warnings are caused by "char" defaulting to unsigned on ARM. In
particular, the second warning was introduced by commit
785e95ef0a, which is not upstream...
qbenchmarkvalgrind.cpp:224:5: error: variable ‘_qzz_res’ set but not used [-Werror=unused-but-set-variable]
This one was fixed for x86-64 in 7b54571ec2 but not
for the other platforms.
KeccakF-1600-opt32.c:250:5: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare]
This one is wasn't caught before because it applies only to big-endian
code.
Change-Id: Ice33b639e55d95140cbf912bb81b6f508ed3744a
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
51ee309a79 introduced this check, but it
was supposed to be >= (it's available in 4.8.1, not after 4.8.1)
Change-Id: Id993b128de5c3500684833aea8ef556b31aac5f2
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The check in [QIOSOrientationListener orientationChanged] ensured we
never reported the two unsupported orientations through QPA, but we
were reporting back the orientation through QIOSScreen::orientation()
as well, and that didn't have a guard for -1. This resulted in crashes
in client code that assumed the range of QScreen::orientation() was
defined by the enum, such as the paintedwindow example.
The listener now ignores the two unsupported orientations, which leaves
us at the previous orientation. For the conversion function, we still
have to support all UIDeviceOrientations, so we fall back to portrait
for the two unsupported orientations. In the future we should consider
caching the previous value explicitly, or fall back to the interface
orientation.
Change-Id: Ic19d0ce86b4ddea250ea927d5e8664396b2b68fd
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Internally iOS double-buffers its rendering using copy instead of flipping,
so we reported that our context was single-buffered so that clients could
take advantage of the unchanged buffer. This failed when clients (such as
Qt itself) then assumed that calling swapBufferes() was not needed.
We now properly report that we're double-buffered, and we'll have to find
another way to report the way double-buffering works if that's still an
optimization we'd like to provide to clients.
Change-Id: Id2e4faa68ed3b837ad01d6f22b2927fc9c9769c2
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Since 39a052c664, QAccessible::State is no
logner an enum that moc understand.
moc currently silently ignores it the Q_ENUMS
Change-Id: Iecc30ad57055fc9ccaa33e9e9c400d96997d0902
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
QSharedDataPointer does not actually need a class derived from
QSharedData. All it needs is a member called "ref".
Change-Id: I2f7fe4cc143478ef7ef64681eada16e2d4c2e63a
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
It's not used anywhere, so we don't need to cache the locale data
index. We already have the pointer to the QLocaleData anyway.
This saves us a few roundtrips calculating the index from the data
pointer only to get the data pointer again.
Change-Id: I6905d20a382ddcb9fb04cc886a17499b467f905a
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Direct benefit is that the code between the two QLocale constructors
taking language, country and (maybe) scripts is merged.
This will also allow us to cache the QLocale::c() result.
Change-Id: Ia46c5a37764dc287bfcd3a52a022ac413c53a582
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
We have to call DetachCurrentThread() for each time we call
AttachCurrentThread(). Fortunately we have this convenience
class that we prepared earlier.
Task-number: QTBUG-30847
Change-Id: I5ffb94b336d3787a3bae197bab22b91770d58848
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
The back button would be non-responsive for 5 seconds after
hiding the software keyboard. This is a minimal change that
does not look into why we need to have a 5 second delay in
the first place.
Task-number: QTBUG-30752
Change-Id: Ied514b77650cea7accc37a03efef2ce861090f65
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
-This should allow any Qt 5 module which inherit qt-module-defaults
to link to the Qt Creator Manual.
Change-Id: If413fe299fa604d16c06fa261024c1a12be24b09
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Most of the logic was still following the 10.6 UI guidelines, and had
not yet been upgraded to the 10.7 new button look. We tried to keep
10.6 compatibility were possible, and improve 'small' and 'mini' Aqua
sizes support.
Change-Id: I64139f24cccd095e9349b27a987395210b55c586
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
The Config class is further modified to make
use of the current directory information it
stores with each configuration variable.
Task-number: QTBUG-30725
Change-Id: I34c845e6c05d7868266324f1d54e56f94d709f95
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
The Config class is modified to build a single
multimap containing a record for each variable
found in each .qdocconf file. Each reacord
contains not only the name and value of the
variable, but also its location in the qdocconf
file it was read from and the path to that file.
This single multimap replaces 3 maps in the
Config class.
Task-number: QTBUG-30725
Change-Id: I049a69790f943b24c014a24b55b2b39725a1b56f
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
When the control is read only. This is documented but not implemented.
Add functions to zoomIn and zoomOut.
Task-number: QTBUG-30845
Change-Id: I692b5f8cc5791498d34d35ea3dafa18b6e5d3e65
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
One can zoom in/out text inside a QTextEdit when the widget is
read-only or when using the zoomIn/zoomOut functions.
Zooming inside a HTML document only works if the font-style is not set
to a fixed size inside the document though. Adding this information
to the documentation.
Change-Id: I66a62da53827e1ce3241ba16b91e86926b97c297
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The majority format is "<Qt Module> C++ Classes" (see
http://qt-project.org/doc/qt-5.0/qtdoc/modules-cpp.html)
Also, fix a broken link (Qt Network C++ Classes)
"<Qt Module> C++ API" is perhaps the more correct format, but that's
part of a much bigger cleanup: QTBUG-30556
Change-Id: I753365e2bec8d85d9a5f686b4aa35c9eeeaf0871
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
With QUrl variants of the static methods, it is possible to get to use
VFS facilities of the platform if available.
Since we can't predict if the application will use the VFS available in
the platform or its own mechanisms, an extra parameter is provided to
restrict the protocols allowed to the user. This extra parameter
defaults to no restriction, which is the most convenient if the platform
file dialog and the application use a matching VFS. It's likely to be
the most common use.
Change-Id: I4c9effde9d194d226cd8b7a140eb9036187ba87b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Test locale-based formatting of numbers when we pass field width, base
and fill characters. This now tests the fact that we replace a '0' for
the locale's zero character.
Change-Id: Ib872a592fd9a754e3ef11495a9497a6947056631
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
