Commit Graph

21 Commits

Author SHA1 Message Date
David Faure
12d8264a24 tst_qdbusabstractinterface: generate interface at compile time
in order to test for regressions in qdbusxml2cpp too.

Change-Id: Icd2a6f319c5fabf0b0f2a1fe8c70afcd2c84263e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Kevin Ottens <kevin.ottens@kdab.com>
2013-05-09 12:35:39 +02:00
Thiago Macieira
537679cb12 Fix wildcard signal disconnection in QDBusAbstractInterface
This has been broken forever, just like generic signal
disconnection. It didn't use to show up before because in Qt 4,
QObject's destructor would not call disconnectNotify().

Just like in the previous commit, we need to verify whether the signal
was disconnected from the last receiver. A wildcard disconnect might
be disconnecting only from a specific receiver.

Task-number: QTBUG-29498
Change-Id: I0790128ea878fdf3ac563c99d96c6aa7d270e9a3
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
2013-03-19 07:03:25 +01:00
Thiago Macieira
d2a98df9bc Make sure that signal disconnects don't disconnect too much
There has been a latent bug forever in QtDBus that would make a signal
disconnect actually disconnect too much. The reason is that
disconnectNotify() is called every time a signal is disconnected from
a receiver, but that doesn't mean it was the last connection.

This test checks whether disconnecting from voidSignal() to our test
receiver will also disconnect from exitLoop(). If it does, we'll get a
timeout. I could have implemented it with two receivers, but in the
buggy case, it would always fail first in the timeout verification.

Change-Id: I5766d8a38594eb25e65b304913251303660fad41
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
2013-03-19 07:03:17 +01:00
Thiago Macieira
6c48b9ad87 Remove bogus portion of unit test
In Qt 4, QSignalSpy didn't *really* connect to the signal it was
spying on. See the "we need to connect the signal somewhere in order
for D-Bus to enable the rules" comments.

In Qt 5, it connects, which rendered this section of the test bogus:
since the signal is still connected, the QSignalSpy will notice that
fact and will not be empty. This is passing due to a false
positive. The upcoming fix breaks it, so we need to remove it.

Change-Id: Ic8fbf7d0e941403e97149f5bc392334a52c66ab1
Reviewed-by: Lorn Potter <lorn.potter@jollamobile.com>
2013-03-15 21:37:51 +01:00
Sergio Ahumada
48e0c4df23 Update copyright year in Digia's license headers
Change-Id: Ic804938fc352291d011800d21e549c10acac66fb
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
2013-01-18 09:07:35 +01:00
Marc Mutz
b5b165ffb3 normalise signal/slot signatures [QtDBus tests]
Change-Id: I4a0441d37e455dce28072ee3650b2062bec65759
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2012-10-19 00:44:54 +02:00
Iikka Eklund
be15856f61 Change copyrights from Nokia to Digia
Change copyrights and license headers from Nokia to Digia

Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
2012-09-22 19:20:11 +02:00
Thiago Macieira
672b5b7ab6 Set the Qt API level to compatibility mode in all tests.
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.

Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
2012-08-01 15:37:46 +02:00
David Faure
9724642621 Fix unit confusion in ccf3b9e48b2d773999a9a88e249f79380618cde6
I wrote nonsense in that commit. The older methods that take a timeout
all take milliseconds, and the comments in the unit test really meant
milliseconds, not seconds. 1s is not shorter than 100ms....

Change-Id: Ic18899bb0462d89575dc5a9a311478adc4dea1cb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2012-05-02 22:49:26 +02:00
Debao Zhang
ade8888603 Don't use obsolete qVariantValue, qVariantCanConvert, etc.
qVariantValue and qVariantCanConvert are Compatibility members, while in
Qt4.8 they are marked as Qt 3 Support Members.

qVariantFromValue and qVariantSetValue are Obsolete members.

Change-Id: Ie8505cad1e0950e40c6f6710fde9f6fb2ac670fd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
2012-05-02 08:30:59 +02:00
Thiago Macieira
e02a144a3c Finish cleaning up com.trolltech -> org.qtproject in QtDBus
Lots of uses of the annotations and error names, plus a bunch of local
unit test names (including one file that had to be renamed).

The meta object generator is updated to support both the old and new
names. That means some references to com.trolltech *must* remain in the
source code.

Task-number: QTBUG-23274
Change-Id: Icc38ae040232f07c437e7546ee744a4703f41726
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Lorn Potter <lorn.potter@nokia.com>
2012-04-16 00:07:39 +02:00
Thiago Macieira
65e75acd05 Update the error codes in QtDBus
Change the old com.trolltech ones to org.qtproject and introduce Use
the alternate domain name for the Qt Project because the dash
character is not valid in interface and error names.

Task-number: QTBUG-23274
Change-Id: Iac1699e70525d67f983c10560932acff6b2ecde6
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
2012-04-16 00:07:25 +02:00
Rohan McGovern
e88f9a92b7 Stabilize tst_qdbusabstractinterface and make it XFAIL
This test was written incorrectly in a way which happened to allow it to
pass most of the time (but not all the time).

Reset the state of test objects between each test function, and mark the
broken functions with QEXPECT_FAIL and a link to a task.

Replace the unusual WaitForPinger construct with the usual
QTRY_VERIFY/QTRY_COMPARE method of verifying asynchronous operations.

Task-number: QTBUG-24262
Change-Id: I82d09002307c0b500bf60cd5b583674321b37609
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2012-02-20 23:34:35 +01:00
Jason McDonald
5635823e17 Remove "All rights reserved" line from license headers.
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.

Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2012-01-30 03:54:59 +01:00
Jason McDonald
629d6eda5c Update contact information in license headers.
Replace Nokia contact email address with Qt Project website.

Change-Id: I431bbbf76d7c27d8b502f87947675c116994c415
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2012-01-23 04:04:33 +01:00
Jason McDonald
1fdfc2abfe Update copyright year in license headers.
Change-Id: I02f2c620296fcd91d4967d58767ea33fc4e1e7dc
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2012-01-05 06:36:56 +01:00
Rohan McGovern
d04bf8f407 all remaining tests: eliminated usage of qttest_p4.prf
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.

Change-Id: I02fe27b2c1800f929250fa8694ca2976c9661a12
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
2011-10-25 08:42:23 +02:00
Jason McDonald
a165cbb1f0 Remove redundant logic from dbus test .pro files.
There was logic in .pro files for the dbus tests to omit the body of
each test if dbus was not available in the Qt build.  This was all
redundant however, because tests/auto/auto.pro already excluded all dbus
tests if dbus was not available in the Qt build.

Change-Id: Iaea06e38622e5227daec4d2e08106c2da3fb4013
Reviewed-on: http://codereview.qt-project.org/6372
Sanity-Review: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2011-10-11 07:02:14 +02:00
Lars Knoll
1363d5b9eb This passes just fine
Task-number: QTBUG-21424
Change-Id: Ied95373b2cf3882ec4f352ccbc285b578c66f83d
Reviewed-on: http://codereview.qt-project.org/5003
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
2011-09-20 21:57:18 +02:00
Holger Ihrig
5842e7e97e Temporarily disabled tests
Necessary to avoid CI blocking.
The tests should be enabled again as soon as possible.

Task-number: QTBUG-21424
Change-Id: Ibc54723855579095be0dea3bd3e071dd22a1fccf
Reviewed-on: http://codereview.qt-project.org/4825
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Matthew Cattell <matthew.cattell@nokia.com>
2011-09-14 05:06:23 +02:00
Jo Asplin
daf24b1b64 Moved dbus autotests into new directory structure
Task-number: QTBUG-21108

Change-Id: I8cdd4af59db3716921e7392379584f349ed29136
Reviewed-on: http://codereview.qt.nokia.com/3602
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2011-09-01 09:37:08 +02:00