Use a scope guard to print debug info in case of an early return.
Silences clang warning about sprintf being unsafe and deprecated.
Change-Id: Idcbfde1a6f2eb1143f51c1e5ecedbf3fe90d8ec8
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The doc said positive values for a negative range were intermediate
but the code actually rejects them if the value has an overt plus
sign, so make clear that intermediate is only for the case without a
sign. Incidentally comment on a test where it might not have been
obvious to the reader that a space is the locale's digit-grouping
chracter.
Pick-to: 6.5 6.5.0
Change-Id: I3edab74fe8c2cbe8448c0e523676f1fd0d0d8a9f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
From the manual page:
Note: modern applications may prefer to use the interfaces
described in utimensat(2).
Change-Id: Ib20d8b9b50626233852ca351452ce90841a39603
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make sure to properly close the cloned database connections and allow
one test for sqlite
Change-Id: Ia4eb4a684a3c432844e4b2a77bff69655b53f9b2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This example is useful but not a typical starting point for an
application.
Task-number: QTBUG-110647
Pick-to: 6.5
Change-Id: Ic4af8ed648c587b91110a7403fa80c619549289d
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Make them templates, for two reasons:
- so they can accept std::pmr types and, in general, any basic_string
with custom allocators and char_traits
- to break overload ambiguities with the Qt string view types
Also, add the missing C++20 char8_t overloads.
Also, avoid creation of a QString in the sizeof(wchar_t) == 2 case
(Windows). Add a comment to optimize for the sizeof(wchar_t) != 2 case
later.
Found in API review.
Pick-to: 6.5
Change-Id: I30139520f582a38863a0936f8eca4b1ed33e37c8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
otherwise there is no way to synthesize a "click" through the a11y API.
toggleAction only leads to a toggled() signal but the user may be more
discerning and only listen to clicked() (or QAction::triggered) to react
to **user** events not all toggle events. as such pressAction is always
superior to toggleAction when user input is meant to be synthesized
through a11y tooling.
Change-Id: I7f024d57087b545d3cfd1805026ea538b0b3e166
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
C++20 doesn't like arithmetic with enums anymore. While this hasn't
caused immediate pain, yet, fix it pro-actively for an imminent patch.
As a drive-by, fix the missing space at start of comment.
Pick-to: 6.5 6.4 6.4.3 6.2
Change-Id: Id08bb227c587bc7b900c593a7b6d2655ca32eefd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Also add one for types that are neither copy- nor move-constructible.
In contrast to resize(n), the QVLA(n) ctor worked for such types, so
make sure it stays that way.
Pick-to: 6.5 6.4 6.4.3 6.2 5.15
Change-Id: If54fbc9dd6a4808175c4bcb0ffb492b33c879746
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Use it in a few places.
[ChangeLog][QtCore][QMessageAuthenticationCode] Added
QCryptographicHash-style resultView().
Change-Id: I745d71f86f9c19c9a9aabb2021c6617775dab1cf
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Both QTimer's and QObjectPrivate's destructors print a warning if the
current object lives on another thread and has an active timer:
QWARN : tst_QTimer::moveToThread() QObject::killTimer: Timers cannot be stopped from another thread
QWARN : tst_QTimer::moveToThread() QObject::~QObject: Timers cannot be stopped from another thread
This timer is used to ask the thread to quit, which in turn allows us to
destroy this QObject without a cross-thread warning. Because it's
already fired once and done its duty, we can make sure it's not active
by simply making it single-shot.
Pick-to: 6.4 6.5
Change-Id: Ieec322d73c1e40ad95c8fffd17465067b27c044b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
A click on the selected item should deselect all other items before
editing starts.
Remove the part of the test case that assumes that we can have multiple
items selected in ExtendedSelection mode, and click on an item to start
editing while maintaining selection. That can never happen.
Pick-to: 6.5 6.4 6.2
Fixes: QTBUG-111131
Change-Id: I0312eed4614502cfb77eca26d3f7615427493d7d
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
The documentation for the RelationFlag enum was not very clear on what
was the "first" and "second" object.
And the fact that the AT-SPI backend (which these enum values originates
from) inverses "first" and "second" makes it harder to understand what
how it all fits together.
So when (with this change) Qt documents 'QAccessible::Labelled' as
"The returned object is labelled by the origin object"
AT-SPI documents ATSPI_RELATION_LABELLED_BY as:
"The origin object is labelled by the returned object"
(Documentation for AT-SPI is rewritten so that it shares the same
terminology)
Notice that the two objects are exchanged, which means that even if they
use the same 'Labelled' relation, the semantic gets 'inversed'.
This is already the case today, so we cannot change it. Therefore, to be
clear, the relation mapping will remain to be like this:
Qt Relation | Maps to AT-SPI | Qt explanation
----------------+-------------------------------+--------------------------------------------------------------------------------
Label | ATSPI_RELATION_LABELLED_BY | The returned object is a Label for the origin object
Labelled | ATSPI_RELATION_LABEL_FOR | The returned object is Labelled by the origin object
Controller | ATSPI_RELATION_CONTROLLED_BY | The returned object is the Controller for the origin object
Controlled | ATSPI_RELATION_CONTROLLER_FOR | The returned object is Controlled by the origin object
This mapping can already be seen in qAccessibleRelationToAtSpiRelation()
For the record, these future relations should then be mapped to like
this:
Qt Relation | Maps to AT-SPI | Qt explanation
----------------+-------------------------------+--------------------------------------------------------------------------------
Described | ATSPI_RELATION_DESCRIPTION_FOR| The returned object is described by the origin object
DescriptionFor | ATSPI_RELATION_DESCRIBED_BY | The returned object provides a description for the origin object
FlowsTo | ATSPI_RELATION_FLOWS_FROM | The returned object has content which flows logically to the origin object
FlowsFrom | ATSPI_RELATION_FLOWS_TO | The returned object has content which flows logically from the origin object
Change-Id: Ib245ec95564e4886dc6dbbb68abec2b23cd0e534
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Michael Weghorn <m.weghorn@posteo.de>
Runtime support is indicated via QRhi::Feature::HalfAttributes.
OpenGL support is available in OpenGL 3.0+, OpenGL ES 3.0+, and in
implementations that support the extension GL_ARB_half_float_vertex.
Other RHI backends (Vulkan, Metal, D3D11, and D3D12) all support this
feature.
Note that D3D does not support the half3 type. D3D backends pass half3
as half4.
tst_qrhi auto unit test included.
Change-Id: Ide05d7f62f6102ad5cae1b3681fdda98d52bca31
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Amends 0242be9060, and removes unwanted
side effect of having a modified style behavior for later functions.
Pick-to: 6.5 6.4 6.2
Change-Id: If3dff0d7ab9e6c6c10e7a92d0a3eaff98fa1457f
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Add Algorithm::NumAlgorithms and use it to iterate over all
statically-available algorithms, querying their hashLengthInternal().
This avoids having to statically_assert(<= MaxHashLength) everywhere,
and auto-adjusts the buffer size in SHA1_ONLY builds.
Yes, the extra case labels for NumAlgorithms are a nuisance, but at
least the compiler will remind us when we forget, unlike a missing
static_cast(<= MaxHashLength) that might easily be forgotten.
Adjust the test (which iterates over the QMetaEnum for
QCryptographicHash::Algorithm, so finds NumAlgorithms and tries to
pass it to the hash() function which responds with a
Q_UNREACHABLE(). Only test hashLength() == 0 for that enum value.
Pick-to: 6.5
Change-Id: I70155d2460464f0b2094e136eb6bea185effc9d5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Only Ukrainian is actually recorded in CLDR as using U+0415 as
exponent separator; all other Cyrillic-using locales officially use
plain ASCII 'E'. However, it seems reasonable, in all Cyrillic
locales, to recognize both (given that they look very similar).
Task-number: QTBUG-107801
Change-Id: I70a1e60a2d9fe7e254e01d32c5bad909ea4b8c76
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
In some locales signs and the exponent are not single character
tokens. Replace QLocaleData::numericToCLocale() with a tokenizer that
will cope with this. At the same time, cache the locale data needed in
support of that, so that we don't repeatedly recreate QString()
objects just to compare them against input tokens.
The caching class is inspired by Thiago's proposal for fixing the
performance, which also inspires the optimization of the C locale in
the tokenizer used here.
Add some testing that round-tripping numbers via strings works for the
locales with signs and exponents that use more than one character.
Task-number: QTBUG-107801
Change-Id: I9fd8409a371ed62ed969d9ebc8b09584e752f7fb
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If it's executable, it should specify how it's to be executed.
Change-Id: If5671712da3e1fbc42b15d22c1253129910091bc
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
It was confusing entry capacity with the bucket capacity. The value
maxNumBuckets() returned was the maximum number of entries. This issue
was harmless: we would just fail to cap the maximum to an allocatable
size. But the array new[] in the Data constructors would have capped the
maximum anyway (by way of throwing std::bad_alloc).
So instead of trying to calculate what the maximum bucket count is so we
can cap at that, simplify the calculation of the next power of 2 while
preventing it from overflowing in our calculations. We continue to rely
on new[] throwing when we return count that is larger than the maximum
allocatable.
This commit changes the load factor for QHashes containing exactly a
number of elements that is exactly a power of two. Previously, it would
be loaded at 50%, now it's at 25%. For this reason, tst_QSet::squeeze
needed to be fixed to depend less on the implementation details.
Pick-to: 6.5
Change-Id: I9671dee8ceb64aa9b9cafffd17415f3856c358a0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Saw this on my FreeBSD VM. The backtrace() function thought the nearest
symbol to something was "_ZTSNSt3__110__function6__baseIFbPvS2_EEE",
which decoded to
typeinfo name for std::__1::__function::__base<bool (void*, void*)>
The function pointer type inside parameter threw the decoder for a loop
and caused it to crash with the failed assertion in qbytearray.h:
inline char QByteArray::at(qsizetype i) const
{ Q_ASSERT(size_t(i) < size_t(size())); return d.data()[i]; }
I noticed this
- because tst_qtimer hung
- because qFormatLogMessage deadlocked acquiring QMessagePattern::mutex
- because the logging recursed
- because qCleanupFuncinfo failed an assertion while formatting the
backtrace (my QT_MESSAGE_PATTERN has %{backtrace})
- because QTimer::~QTimer -> QObject::killTimer printed a warning
- because tst_QTimer::moveToThread produces warnings
Pick-to: 5.15 6.2 6.4 6.5
Change-Id: Ieec322d73c1e40ad95c8fffd17464f86e9725991
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
The test does not build due to fbf2a3's change to QWasmLocalFileAccess
API. Align it with the new API.
Change-Id: I8e70e471c1f7dd812d3b2cf8e1bf33fd58310e81
Reviewed-by: Aleksandr Reviakin <aleksandr.reviakin@qt.io>
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
Three touch points that move/resize three windows simultaneously are
tested
Change-Id: I17d0c8c6c5c90f5121a098e5b67174167cd5aaa5
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
<bit> exists in C++20 and is properly both constexpr and optimized. But
in C++17 mode, we don't have constexpr bitops and instead elect to have
performance at runtime instead. But somewhere along the line, either
when they were added, when C++20 <bit> support was, or in any of the
bugfixes for other compilers, the nesting of #ifdef got messed up and we
declared that we had constexpr builtins for MSVC in C++17 too.
The macro QT_HAS_CONSTEXPR_BUILTINS isn't supposed to be used by anyone
else... but we ended up not being able to use it ourselves either. So
I'm renaming it to a more precise label.
Pick-to: 6.5
Change-Id: I9671dee8ceb64aa9b9cafffd1741b9b4060c9753
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The goal of this function is to ensure that dst is _always_
NUL-terminated. The only exception is if there's no space to write
even one NUL byte, of course, but not when src is nullptr but dst
would have space.
Update the docs to the new behavior and make them more precise.
Fix a test that assumed qstrncpy() would not write to dst for
(dst, nullptr, 10).
[ChangeLog][QtCore][qstrncpy()] Now NUL-terminates the target
buffer even when the source pointer is nullptr, provided the
target buffer has space for at least one byte.
Pick-to: 6.5 6.4 6.2 5.15
Change-Id: I7806d8c71e260f8f02b79af7b6ce94f23599dd69
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The window stack will now upkeep three groups of windows, always
on bottom (1), regular (2), always on top (3). Windows belonging to
(3) will always appear on top of (2) and (1), and windows from (2) will
always appear on top of (1).
The first window created in the application gets the (1) status, which
is in line with the root window mechanism used before.
Activation has now been decoupled from the top position on the window
stack as a window in (1) or (2) may be active, in spite of the top
window belonging to a higher group.
Fixes: QTBUG-110098
Change-Id: I51f4d2d47163fab26ce5ef28f7a4f23a522c7f91
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
Test documented behavior and serv as a baseline for future changes.
Change-Id: I36a914694d5244c89f28f3e403e11d65492a5eef
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
They were leftovers from QTDS driver removed with Qt6
Change-Id: I34863912bd41e0b4ca54bf443001f1cb3f20511a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We so far refetched the first observer after evaluating bindings, as
binding evaluating might change the list of observers.
However, that approach did not take into account that the 'this' pointer
might no longer be valid after binding evaluation: In case of a
QObjectBindableProperty (or a QObjectCompatProperty), binding evaluation
might cause a reallocation of the binding storage, and consequently the
invalidation of the QPropertyBindingData.
Fix this by refetching the QPropertyBindingData from the storage (if a
storage has been provided, which is always the case for the affected
classes).
Fixes: QTBUG-111268
Pick-to: 6.5 6.4 6.2
Change-Id: Ie7e143a0bbb18f1c3f88a81dd9b31e6af463584f
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
This does not really belong here as a built-in feature, esp.
considering that such testing is relevant for other backends
as well.
Change-Id: Ifbe3b8c6a430aacb9fcbdabf0e3761b14c48decc
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The QtSql for Mimer SQL sqldriver makes it possible to work with the
Mimer SQL database on different plattforms. There are drivers for
several other databases in QtSql and a driver for Mimer SQL will
benefit many users.
To build the Mimer SQL driver, download Mimer SQL from
https://developer.mimer.com
[ChangeLog][QtSql]
Added a QtSql plugin to work with the Mimer SQL database
Fixes: QTBUG-111219
Change-Id: Id6ba5de4de01189d0516ffbfa89efcb0d013115f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Drive-by change: use UTF-16 instead of UTF-8 for Eastern Arabic
Numerals, both are not human-readable but UTF-16 is one code point
instead of the two for UTF-8, less \x.
Pick-to: 6.5
Change-Id: I721f3989b7d776ddc4f9d337b21dca9d398fcc0d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Constructing from const char* etc is already covered by
constructorQByteArray.
I took a guess that the "// b(10)" comment is about testing constructing
a QString from a QChar[] that has an explicit \0 charcater. I tried
finding what the initial intent was but the trail went cold at the
"Initial import from the monolithic Qt" commit.
Pick-to: 6.5
Change-Id: I15bcdb24e55286eb6cd3056af0714a1eed581635
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Otherwise, double-click recognition will fail.
Use QEvent::clone when possible, or set the timestamp explicitly when
not.
As a drive-by, remove some long-dead code in affected code lines.
Fixes: QTBUG-102010
Pick-to: 6.5 6.4 6.2
Change-Id: I882bf6e8090bf6f182b7a0a3c62aa3a4c8db2e14
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
I.e. the second arg to QCOMPARE isn't what's being tested.
Drive-by changes:
- More _L1 usage, less blocky and easier to read
- QCOMPARE's second arg can be a View, it is smart enough and can
compare them just fine
- Replace a "//15 chars" comment with a QCOMPARE check
Pick-to: 6.5
Change-Id: I4f4b84b16b543df37b0ba2f9dd781b045b2ed397
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As of macOS 10.14 the keyboard assistant background is shipped as part
of the compiled asset catalog of the app, so looking it up via a URL
will fail.
Instead we look it up via NSBundle's dedicated image lookup function,
which handles both cases.
The logic has also been moved to qwizard.cpp, since the additional
plumbing via QPlatformNativeInterface was unnecessary.
The keyboard assistant itself no longer shows the background image
as of macOS 12, so we might consider doing the same, but the design
of the assistant has also changed significantly, so as long as our
QWizard layout looks like the old keyboard assistant we keep the
background as well.
Pick-to: 6.5 6.2
Change-Id: I7d42dd79b285f3518837458864bca6bc353b3b6d
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
- Port macros to QTest data rows in separate unittests
- Move DOUBLE_TEST-related data to toDouble() unittest
- Drop one redundant unittest:
QTest::newRow("const-charstar") << (const char*)0;
Pick-to: 6.5
Change-Id: Ie809895e9f5d58c2d3ec419689f409b55e24fcf7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
And switch to using test data rows (rooting out two macros in the
process).
Pick-to: 6.5
Change-Id: Ib31e6b59f90f0983c0efc4bef7cb246aedfcab5b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change test data to compile with NO_CAST_FROM_ASCII uncoditionally where
casting from ASCII isn't what's being tested by a unittest.
The goal is to add a variant of tst_qstring that is compiled with
QT_NO_CAST_FROM_ASCII so that the unittests cover that code path too.
The commits are split into smaller chunks (where there is a common
link between changed code, that code is put in a commit, otherwise I
kept the number of changed lines below ~150) to make reviewing them
easier.
Pick-to: 6.5
Change-Id: I14256f1bde7749a3023753dbb7ed8be72cb6bc14
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Amends 17c1ebf8bf, after which dragEnabled
item views toggled selection on click rather than on press. If the edit
trigger included SelectedClicked at the same time, then Ctrl-Clicking a
selected item would start editing the item, instead of toggling
selection.
Fix this by ignoring clicks with modifier when evaluating whether
editing should start.
Extend the mouseSelection test case by including a column for the
editTrigger, and cover the respective combinations.
Fixes: QTBUG-111131
Pick-to: 6.5 6.4 6.2
Change-Id: I9605f9b3d5a49e292551a34c3c4c7a5f9ecb2a89
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
`QStatusBar::removeWidget` was hiding the wrong widget (the next one),
since the `removeAt` call changed the item that the `item` variable
is referencing.
This fixes a regression in Qt 6.3.0 (7166a82844).
Pick-to: 6.5 6.4
Change-Id: I9977b47e6208f8d451ff1037bcb9f4e8414cb431
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thorbjørn Lindeijer <bjorn@lindeijer.nl>
using fileName is more correct in this case.
Task-number: QTBUG-98974
Pick-to: 6.5 6.4 6.2 5.15
Change-Id: I7c547bfc1c2321d4817dc087d3e962dbc2a0b7fd
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Not clearing the continuationData could lead to use-after-free when
there is an attempt to cancel an already finished future, which belongs
to an already-destroyed promise.
This patch fixes it be explicitly resetting continuationData to nullptr
in the clearContinuation() method, which is called from the QPromise
destructor.
Task-number: QTBUG-103514
Pick-to: 6.5 6.4 6.2
Change-Id: I6418b3f5ad04f2fdc13a196ae208009eaa5de367
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
A recent update moved handleScreenChange out of being a private slot.
Porting to the new syntax fixes the warning and moves to a compile-time
check.
Pick-to: 6.5
Change-Id: Ibd85c6caf7dca051d669250a94a82fbddbd3435d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
An effort has been made to support more keyboard layouts that provide
dead keys (US international, Mac-specific dead keys).
The dead key is translated now at the event conversion phase, not
when it is actually used for modifying keys, which simplifies the logic.
Unittests have been created to check the translation mechanism.
Fixes: QTBUG-86272
Change-Id: I07f7d63f5a37f8469c693b034b400da99379f519
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
It's completely unnecessary, since QFileInfo will query the file system
anyway and that has a much better view of what is normalized and what
isn't. More importantly, this fixes the mistake in failing to normalize
properly in removePaths(), which removed the ending slash of a root
directory such as "C:\\". That caused the path to become "C:", which
QFileInfo interprets as "current path on drive C:".
[ChangeLog][QtCore][QFileSystemWatcher] Fixed a bug that prevented
removePaths() from removing the root of a drive on Windows.
Fixes: QTBUG-110986
Pick-to: 5.15 6.2 6.4 6.5
Change-Id: I9671dee8ceb64aa9b9cafffd17419b6d69670876
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The test needs investigation. Skip it for now so that we can enable
CI for WASM but leave a note to investigate it.
Task-number: QTBUG-109954
Change-Id: I9448312c2c16ec4f31279dcbe4e2213681cabe8a
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The code for the QMetaMethod queuedConnectionTypes overload relied on
QMetaMethod::parameterMetaType and QMetaType::flags() to detect whether
we're dealing with a pointer (and then use the VoidStar metatype instead).
However, if the type was incomplete when the slot was defined, and the
type was not registered when connect was called, we would not find a
metatype for the argument.
However, in that case we might still be able to handle the method, by
checking whether the type name of the arguments ends with a "*".
This patch does that, fixing a regression from 5.15.
Pick-to: 6.5 6.4 6.2
Fixes: QTBUG-108537
Change-Id: I54cc48a3343444480ab9094fe1ebaaa5aa75cee0
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This tests resizing and moving in various setups. The test driver
communicates with the actual modules to assert various
postconditions.
It's semi-automated so that minimum interaction is required.
Change-Id: I745d689c6ffa6aa6d478b795dd433f5b067241f1
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
When SPIRV-Cross encounters a GLSL storage buffer runtime sized array,
it generates MSL code which expects a "buffer size buffer" containing a
list of storage buffer sizes to be bound. This patch adds RHI backend
support for Metal "buffer size buffers" on compute and graphics
(including tessellation) pipelines. Includes unit tests.
An accompanying patch to qtshadertools is required.
Change-Id: I9392bfb21803e1a868d7de420fedc097a8452429
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
There is something odd when running on Metal: note how the uv
is vec3 instead of vec2, in order to make the vertex-tesc-tese
data to look like this:
struct main0_out
{
float3 out_uv;
float3 out_normal;
float4 gl_Position;
};
if out_uv was float2 we'd get some strange rendering results,
perhaps due to something related to alignment. But have no means
to investigate this further.
Change-Id: I79d4edb2ddde3971c599c4326d98e99a49aa7122
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
With the introduction of a new atomic variable the users should use the
class QNtfsPermissionCheckGuard or the helper functions
- qEnableNtfsPermissionChecks()
- qDisableNtfsPermissionChecks()
- qAreNtfsPermissionChecksEnabled()
to enable/disable permission checks instead of manually managing the
variable qt_ntfs_permission_lookup (which is a non-atomic variable and
as such prone to data races).
Also moved the variable qt_ntfs_permission_lookup to qfile.h to make it
clash with the user-side declarations the documentation suggested to
use (and it is probably also a better fit thematically anyway).
[ChangeLog][QtCore][Deprecation Notice] Deprecated the variable
qt_ntfs_permission_lookup to avoid race conditions while enabling or
disabling permission checks. It can be replaced by the RAII class
QNtfsPermissionCheckGuard or with the functions
qEnableNtfsPermissionChecks(), qDisableNtfsPermissionChecks() and
qAreNtfsPermissionChecksEnabled().
Fixes: QTBUG-105804
Change-Id: I93a563864ffb3f9945551c34004d8ca393603b25
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Return the file engine impl of QFileInfo::completeBaseName() and
QDir::absolutePath() and QFileInfo::fileName() (based on
QAbstractFileEngine::BaseName) if the file engine impl is valid.
Amends f77668ffec.
Pick-to: 6.5 6.4 6.2 5.15
Task-number: QTBUG-98974
Change-Id: I28a8c75a6f25e30012b0791c12dbde51bfe8f62c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If a slot connected to a QMenu-action destroys the QMenu, then
we must not touch data members in subsequent code, and instead return
immediately.
We cannot use QBoolBlocker here, as that would reset the data
member of QMenuPrivate even when trying to return early.
Fixes: QTBUG-106718
Pick-to: 6.5 6.4 6.2
Change-Id: I6b5ea471b1bf1f9864e1384382100f8f6c01346f
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
dfb4697e4a made a change to selection
behavior that resulted in a regression where clicking on an item view
but not on an item would cause the current item to get unselected.
Changes the behavior to not update in this case.
Added a new test that specifially checks for this scenario and ensures
that the current item is still selected, even after the user clicks on
empty area.
Fixes: QTBUG-105870
Pick-to: 6.2 6.4 6.5
Change-Id: I191c3878819b99897083039fba0ab43908da5429
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
I don't begin to understand the semantics of the trackers here, but
whatever they are, they break with the fallback std::swap() 3-moves
implementation and lose track of alive objects, so provide an ADL swap
that does the right thing.
Amends dd58ddd5d9 (I think).
Pick-to: 6.5 6.4 6.2 5.15
Change-Id: I1cd49c95dca2d103a26c2c7ac0a896929135a6c8
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
A RAII wrapper around Qt::{begin,end}PropertyUpdateGroup().
[ChangeLog][QtCore][QScopedPropertyUpdateGroup] New RAII class
wrapping Qt::beginPropertyUpdateGroup() and
Qt::endPropertyUpdateGroup().
Fixes: QTBUG-110710
Change-Id: If2619e9584dd9d57985d63e3babca75421499ab9
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The "Private Use Area" are subsets of Unicode which are not
considered regular characters, but reserved for fonts to provide
custom glyphs.
If these were used and the main font did not have support for them,
we would look them up in other fonts and sometimes display an
arbitrary selection of glyphs, based on whatever existed on the
platform. This is unexpected and different from how native apps
work on Windows, for instance.
[ChangeLog][QtGui][Text] Font merging (automatic assignment of
alternative fonts) is no longer applied for characters in the
Private Use Areas of Unicode.
Pick-to: 6.5
Fixes: QTBUG-110502
Change-Id: Id2c63786aafda59bf170e0d7263eb78a391fe46d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
And don't use toLower() as QString::compare() and QCollator::compare()
can compare case-insensitively.
Change-Id: I999d787cb77e10a101da75d1bf0a5baf096a5c9b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I.e. don't detach in the replace() overloads that delegate to
replace_helper() if this string is shared, instead create a new string
and copy characters from this string to it, along with the "after"
string, then swap it with this.
Do the same thing if "before" is shorter than "after" and there isn't
enough capacity to do the replacement without reallocating.
Use std::copy* and std::move*, which will both fallback to
memmove/memcpy, but they have C++ API, which is more readable.
[ChangeLog][QtCore][QString] Using replace() on a currently shared
QString is now done more efficiently
Task-number: QTBUG-106184
Change-Id: If74ffa1ed47636dc23d543d6dc123d8f2b21d537
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Utf8 data is variable-width, ideally we want to write characters at most
once, so insert directly into the QString buffer if inserting at the end
(by delegating to append(QUtf8SV)), and use an intermediate buffer to
hold the converted data before inserting anywhere else.
Task-number: QTBUG-108546
Change-Id: Iabfaeecaf34a1ba11946bd67951e69a45d954d6d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of detaching when the string is shared, or if the the insertion
would cause a reallocation, create a new string and copy characters to
it as needed, then swap it with "this" string. This is more efficient
than detaching which would copy the whole string before inserting, as
some characters would be copied multiple times.
Use detachAndGrow(), otherwise QStringBuilder unitests fail:
PASS : tst_QStringBuilder1::initTestCase()
FAIL! : tst_QStringBuilder1::scenario() 'prepends < max_prepends' returned FALSE. ()
Loc: [tests/auto/corelib/text/qstringbuilder/qstringbuilder1/stringbuilder.cpp(61)]
PASS : tst_QStringBuilder1::cleanupTestCase()
The issue is that now when inserting, if the string is going to
reallocated, we create a new string, so the freeSpaceAtBegin()
optimization doesn't work the same way.
void checkItWorksWithFreeSpaceAtBegin(const String &chunk, const Separator &separator)
{
// GIVEN: a String with freeSpaceAtBegin() and less than chunk.size() freeSpaceAtEnd()
String str;
int prepends = 0;
const int max_prepends = 10;
while (str.data_ptr().freeSpaceAtBegin() < chunk.size() && prepends++ < max_prepends)
str.prepend(chunk);
QVERIFY(prepends < max_prepends);
...
...
each str.prepend() would have reallocated.
[ChangeLog][QtCore][QString] Calling insert() on a currently shared
string is now done more efficiently.
Task-number: QTBUG-106186
Change-Id: I07ce8d6bde50919fdc587433e624ace9cee05be8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the object is shared, instead of detaching, copy characters from
"this" to a new object except for the chacters that would be erased,
this is more efficient than detaching (which would copy the whole data
then erase).
- Extend tst_QString::removeIf() to catch a corner-case (that I saw
with tst_QByteArray::removeIf()).
- Add q_uninitialized_remove_copy_if, which works like
std::remove_copy_if but for uninitialized memory like
q_uninitialized_relocate_n (but copies rather than relocates/moves).
With the same static_assert from q_relocate_overlap_n that the type
destructor is non-throwing.
Added q_uninitialized_remove_copy_if in this commit rather than a
separate one so that it's unittested by its usage in eraseIf().
[ChangeLog][QtCore][QString, QByteArray] Removing characters from a
currently shared string or byte array is now done more efficiently
Task-number: QTBUG-106181
Task-number: QTBUG-106183
Change-Id: Icc0ed31633cef71d482b97e0d2d20d763163d383
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's not a very well written example, using (largely unneed) hacks to
implement what it does. It's also misleading - the syntaxhighlighter
example is a better showcase for building a useful code editor.
Move it to manual tests.
Fixes: QTBUG-111025
Pick-to: 6.5
Change-Id: I405d41688235bf3e9a08373e716769f26d02fec6
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The example follows bad and outdated practices:
- running time consuming and I/O heavy workload in the GUI thread
- calling processEvents to keep the UI responsive
- showing results only at the end of a search rather than continuously
Perhaps this example can be rewritten at some point to apply modern
practices (at least use a thread and emit signals), but it seems
to have low overall educational value.
Moving it to be a manual test for now.
Fixes: QTBUG-111002
Pick-to: 6.5
Change-Id: Id630fd4599096448ea4f96bcbf977b11a039796f
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
A QVariant(QString) was not convertible to an enum not registered with
Q_ENUM() which worked fine in Qt5.
The same problem exists for QVariant(enum) to QString.
Fix it by not bailing out when no metatype for the enum was found and
try to convert it to a qlonglong instead (which is then correctly
converted to the enum type).
Fixes: QTBUG-109744
Pick-to: 6.5 6.4
Change-Id: Ie7bb016a860455b69508f0f46b36474c9c294f3a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Implemented assign() methods for QVarLengthArray to align
with the criteria of std::vector, addressing the previously
missing functionality.
Reference:
https://en.cppreference.com/w/cpp/container/vector/assign
[ChangeLog][QtCore][QVarLengthArray] Added assign().
Fixes: QTBUG-106200
Change-Id: If671069808ff561b0f4c77b6c7f7aca360a0c663
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This fixes a use-after-free in QPropertyDelayedNotifications::notify.
Before this patch, evaluateBindings or a notify from a property index
might have caused the originalBindingData to become reallocated.
However, at that point, we've already restored the original bindingData
in evaluateBindings, so we won't track updates, and thus won't adjust
originalBindingStatus, which will then point to already freed data.
To remedy this, we no longer do the notification with data fetched from
originalBindingData, but instead use the information we have in the
proxyData.
We also need to enure that referenced bindings do not get deleted; for
that we keep the PendingBindingObserverList alive for the whole duration
of the endPropertyUpdateGroup.
As we now have the PendingBindingObserverList, we use it for the
notification logic, and only notify change handlers in
QPropertyDelayedNotifications::notify. That will allow a follow-up
cleanup of QPropertyObserverPointer::notify, and aligns the logic for
grouped updates with the logic for "nornal", non-grouped updates.
Amends f1b1773d0a.
Task-number: QTBUG-110899
Pick-to: 6.5 6.4 6.2
Change-Id: Iae826e620d9614b7df39d86d8a28c48c8a5c4881
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
That use case for the class never materialized, and it was actually
meant for internal use. However, we put it into the public header, so
we cannot remove it (and while undocumented, someone actually used it at
some point, compare e4d62651c2).
Mark it as deprecated instead so that it can be finally be removed in Qt
7.
Change-Id: I058c5831a44610121fbec6eaddebd8b33d4a16c9
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
qt_ntfs_permission_lookup is a global, non-atomic variable which
could cause problems in case of multiple threads. Introduce a
new atomic variable to handle permission lookups but instead of
manual incrementation/decrementation, implement a class to manage
the variable.
Since the atomic variable is not directly available to the user,
implement helper functions to increase/decrease/check the status
of the variable.
Task-number: QTBUG-105804
Change-Id: If6cbcdd653c7f50ad9853a5c309e24fdeb520788
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Introduce the qt-cmake-create script. The script generates the simple
CMakeLists.txt based on the source files located in the current or
specified directory. The initial version can generate a CMake code for
the following file types:
- .c .cc .cpp .cxx .h .hh .hxx .hpp - generates the qt_add_executable
call with prerequisites.
- .qml .js .mjs - generates the qt_add_qml_module call with
prerequisites.
- .ui - adds the found ui files to the existing executable. Requires
C++ files be present in the directory too.
- .qrc - generates the qt_add_resources call and adds the resources
to the existing executable. Requires C++ files be present in the
directory too.
- .proto - generates qt_add_protobuf call with prerequisites.
The QtInitProject.cmake script contains the 'handle_type' function that
allows extending the script capabilities and establish simple relation
chains between the file types.
Note: The initial implementation doesn't deal with sub-directories, so
all files from sub-directories will be added to and handled in the
top-level CMakeLists.txt file. This can be extended by user request.
Task-number: QTBUG-104388
Change-Id: I5abd9e07da109e867ff95986572ed2bf02ef9d3d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In addition to being an iconic part of Qt's history, wiggly is also
widely used for verifying on embedded hardware.
Change-Id: Ica86626d98ade2570eebe787860293380c21f96a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
The adaptor is a server-side implementation that must exist anyway and
is called by the QtDBus runtime. We don't want warning on the server
side because it must call those methods to implement the client API.
Since we have the XML introspection saved in a class property anyway,
the runtime won't be inspecting the method tags to see if
Q_DECL_DEPRECATED is there, to add to the XML (which it isn't
generating).
Pick-to: 6.5
Change-Id: I9671dee8ceb64aa9b9cafffd17416596135d26ca
Reviewed-by: David Faure <david.faure@kdab.com>
Commit 93dad2bf91 (6.0) changed
Q_DECL_DEPRECATED to use the [[deprecated]] attribute, which must appear
before inline and other keywords.
To keep it next to Q_NOREPLY, I also moved the "inline" into the next
string.
Added missing tests for both.
Pick-to: 6.2 6.4 6.5
Fixes: QTBUG-110979
Change-Id: I9671dee8ceb64aa9b9cafffd1741656e86f40453
Reviewed-by: David Faure <david.faure@kdab.com>
