The RGBA8888 formats was incorrectly using the qt_gradient_quint32
which is argb specific. This caused vertical gradients but only
vertical gradients to be drawn incorrectly.
This changes the RGBA8888 formats formats to use the generic gradient
method and renames qt_gradient_quint32 to qt_gradient_argb32 to
indicate its limitation.
Change-Id: Ia1cd48ca7f4f78b64f31d6263e81cd8ac3b0954e
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
RGBx8888 to ARGB32_PM is incorrectly using the RGBA8888 to ARGB32_PM
which asserts the input format is RGBA8888. Since the routine also
performs an unnecessy premul, we should be using a the generic rgba2argb
routine.
Change-Id: I7b67328f804f5f2a9664a35c04836679e8c8b8e5
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
The XDG specification for file URIs requires us to use triple slashes in
file:/// for URLs with absolute paths. I don't like special-casing any
particular scheme, but we've done it for file for many years now.
Since we need to test this situation in a couple of places, it's easier
to just cache the result once, in setScheme (both functions).
Change-Id: I078b45b5b6c861f4caee082b4730fd6f67684ae4
Reviewed-by: David Faure <david.faure@kdab.com>
NVDA for example reads name and value, so that most of our
accessibles would lead to the same text being read twice in a row.
Instead use Name as that's best supported on all platforms.
[ChangedLog][QtWidgets] Fixed accessibility issues that would lead to
screen readers reading the same text twice.
Task-number: QTBUG-36678
Change-Id: I6c5c9cdcf5392c7135a65bd30f87a590c3c07fb4
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
The basedir xdg spec says:
"All paths set in these environment variables must be absolute.
If an implementation encounters a relative path in any of these variables it
should consider the path invalid and ignore it."
Therefore we ignore relative paths including the empty string.
Change-Id: I8f779b78981018051b16de23b2514f2e62b7ab39
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_QDir::tempPath already checks that there is no trailing slash.
Except of course when the path is "/" or "C:/", but we can't do much
about that unlikely corner case.
Change-Id: If71d5de1aeebc6720348cecbf659b7fceb83fb0e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
This is a no-op because QDir::cleanPath() already takes care of removing
the trailing slash.
Change-Id: Ic19d9a9dd7e377e04447c3ebc776b025f5f0c43a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The slot object was deleted after the mutex was relocked, which caused
a deadlock in case the functor destructor locked the same mutex again.
Change-Id: I5b4fb22fdb4483f91c89915872bfd548c31b0eea
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
In KDE, without this patch, the Q_ASSERT in the following code fragment
fails:
QFileDialog dialog;
QStringList list = QStringList() << "c (*.cpp)" << "h (*.h)";
dialog.setNameFilters(list);
QString filter("h (*.h)");
dialog.selectNameFilter(filter);
dialog.show();
Q_ASSERT(dialog.selectedNameFilter() == filter);
The reason for the fail is that the selectNameFilter() does not properly
propagate the filter to the QPA plugin. So the first part of this patch
adds d->options->setInitiallySelectedNameFilter(filter); in the function
QFileDialog::selectNameFilter().
The second part of this patch makes sure that the initially set name
filter in the QFileDialogOptions "options" is not overwritten in the
helperPrepareShow() function. This is achieved by adding an if(),
following the if() for the initiallySelectedfiles() the line below.
With this patch, the Q_ASSERT() holds true in KDE Framework 5's
file dialog integration.
Change-Id: I15d8c88a0fa3cdc03e3330f3458bbad139a71212
Reviewed-by: Kevin Ottens <kevin.ottens@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
For consistency with all other sources of paths, which do not return
a trailing slash, as tested by the unittest. This avoids double slashes
in paths, after apps append something to the path.
Change-Id: Iabcde11eee27df0b185780e2b655fbbb02ed63b5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtGui] Windows Accessibility now handles the disabled state
of widgets correctly.
Task-number: QTBUG-36603
Change-Id: Ifebcf44320072089da66e81728de94e8f12a3354
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Parse first for 'mmsize' because the regex for 'size' also fits to 'mmsize'.
Task-number: QTBUG-29133
Change-Id: Idc4950270818e496d5d94a97a172b7c780f069b1
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
If DMPAPER_USER is set from the print dialog then it is expected that
the specific member variables to get the custom width and length are
used. The size returned by querying the DC_PAPERSIZE is some random
default and is not the one actually requested by the user.
Also ensure that when it is a custom paper size from the driver
itself that we store the right paper size.
Change-Id: I760b8429ca1b01f5e303f2111b8d7ca1795c8ab8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Unlike the newer QOpenGLFramebufferObject, QGLFramebufferObject still
contains some unfortunate tests for !IsRenderBuffer when creating
renderbuffers. Removing these tests avoids asserting in debug builds
on drivers that are not conformant to the GL spec in this respect.
This means that the qgl autotest is now passing on such drivers too.
The tests do not make much sense in the first place since Qt is not
a conformance test suite.
Change-Id: I21d6272cd5cef9dd71eab57e46771d3ce7dacbfb
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
It's not "preliminary" anymore, and it doesn't return a QPlatformWindow,
but a QWindow.
Change-Id: Iaa1938728e689d97011dce8cf0d88ff8cb4a83b9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
[ChangeLog][QtGui] Accessibility on Linux reported all objects as being
editable instead of just editable text items.
Change-Id: I8bca2799a2e5b175b3ca515fee5dd02eae23829e
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Adding device mask verification for static device discovery.
DRM devices are no longer scanned if mask is set to input devices only
Change-Id: Ibd2e77280c2d93c707ba7bdb84c4ae3cb0932178
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Querying GL_MAX_SAMPLES is not supported in GLES2.
Avoiding the call also makes us play nice with Mesa in debug
mode since it gets rid of the warnings about the failing
glGetIntegerv call.
Change-Id: I05e501cc11af41a54fefc34ab919c5191e4f3f0a
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
2d05d3bd28 was not correct.
On OS X, when user uses CJK input method, only types single punctuation,
it was converted to CJK ones, and not showed in composing text.
Task-number: QTBUG-35700
Change-Id: I2d1063d2f837d075929dc5ebb5722fdefc6ee0f6
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Enable non power of two texture support for non compatible NPOT GPU.
If the context does not handle NPOTTexture feature, the image to bind is scaled to POT size. It works with OpenGL ES and Desktop version.
It is actually almost the same code as the one in QGLContextPrivate::bindTexture.
Change-Id: I6f0f511165c9e171a14f4ba6ba0b7a902e590cf6
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
This fixes a serious regression from
7d72516b52.
[ChangeLog] QFileSelector: the identifier for OS X has been changed back
to 'osx' from 'mac', and 'mac' and 'darwin' have now been added as
selectors for Darwin OS (which is the base of both OS X and iOS).
Task-number: QTBUG-35073
Change-Id: I83183e34c5a697338cc1ddcac33a41bd379ded12
Reviewed-by: Alan Alpert <aalpert@blackberry.com>
This bug causes that Cascades QML application cannot open more than
system ulimit defined number of different asset:///*.qml files.
The realFile is ordinary closed in the ~QNetworkReplyFileImpl(),
the QDeclarativeTypeLoader::::networkReplyFinished() calls
reply->deleteLater(). There are tricky situations when event-loop is
not entered and too many read already files are waiting for close.
This patch close() file when all the data is read. It can be done
this way since the QNetworkReplyFileImplnetworkreply is a sequential
device.
For more info, please, read comments on QTBUG-36032
Task-number: QTBUG-36032
Change-Id: I4002f21b4b0c7350af48b0dc6530d9606fd2794b
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
KDE calculated colors weren't set correctly rendering all calculated colors
"Light", "Midlight", "Mid" and "Dark" as black.
Issues fixed:
* QFrame with frameStyle Box|Raised didn't look raised but
instead just black border.
* QMdiArea had black background
* QToolBox separators were just black
Change-Id: I5e06bafe280f73af12f23960ae68a8b35e8549ac
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Kimmo Leppälä <kimmo.leppala@digia.com>
When changing a filter so that a previously empty proxy model becomes
populated sorting was not applied correctly.
This was caused by using mapToSource for getting source_sort_column
from proxy_sort_column. For an empty proxy model this won't work because
no valid proxy index can be created in this case.
We now directly use the root index column mapping instead by doing
essentially the same as QSortFilterProxyModelPrivate::proxy_to_source
but without the sanity checks needed for external use.
The sorting feature of QSortFilterProxyModel has always assumed that
the number of columns is specified by columnCount(QModelIndex()) so
the behavior doesn't change.
[ChangeLog][QtCore][QSortFilterProxyModel] Fixed sorting when a
previously empty proxy model becomes populated because of a change in
the filter.
Task-number: QTBUG-30662
Change-Id: I21322122e127889dfadc02f838f0119ed322dcab
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Removed QMoveEvent generating code from QWidgetPrivate::setGeometry_sys
for widgets with native window handles. A move event is already
generated for them by QGuiApplicationPrivate::processGeometryChangeEvent.
Task-number: QTBUG-32590
Change-Id: I73313a012851516047ac017f1e15a21774d8ffe2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Remove reference to released font-engine so we don't risk returning it
later.
Change-Id: I741a741567a079818c7f414ac1f9c0b5a9677322
Task-number: QTBUG-36522
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
If the user code installs a message handler that uses
any API that prints logs (handled by qt_message_print)
then this will lead to an infinite loop.
This patch adds a thread local storage to check
if the message handler is done before the thread
is calling it again.
Note: This check is performed only if the compiler
supports thread_local (__declspec(thread) for MSVC).
Change-Id: I43b0460b8f39b26a18de48a5652a5e55f0b336f8
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
There's no loss of data when converting a Unicode string to UTF-8,
so don't state that in the docs.
Change-Id: If26914ec674a994d9c59136448e8e4292d0412e8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The screenshots were taken on Windows 7 with the Aero theme.
Change-Id: I2517664e25389f4fb87408daec7b720dfb785bf0
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
