Inherits QSurface and allows to use OpenGL from an arbitrary thread.
Platform plugins can implement QPlatformOffscreenSurface, otherwise an
invisible QWindow is used by QOffscreenSurface.
This patch includes an implementation of QOffscreenSurface for XCB
and EglFS platform plugins using pbuffers.
Change-Id: I57b4fc1db417331f34826dcfa754b7698782fde4
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
As long as fonts weren't used we supported using QImage in combination
with QCoreApplication in 4.x, and there's no reason we can't continue
doing so.
Task-number: QTBUG-29643
Change-Id: I2cf351d3c93f1c175bbf624e45024d39ab913111
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
QPixmap::load() would not detach, so multiple paths could get associated
with the same QPixmap, causing the wrong pixmap to be shown.
Task-number: QTBUG-29639
Change-Id: I064dd6a9611b5996853bec9fb20b6224a0adcf62
Reviewed-by: aavit <eirik.aavitsland@digia.com>
This finally makes it possible to make windows fullscreen etc from
QML by doing "visibility: Window.FullScreen". I don't see any reason
from not having the API at the QWindow-level instead of at the
QQuickWindow-level since this way it can benefit other use cases too.
Change-Id: If27344306eb563bc2ccd83296a46b1f2862e2db1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
This lets you write code like format.version() >= qMakePair(3, 2), and
format.setVersion(4, 2) instead of format.setMajorVersion(4);
format.setMinorVersion(2);
Change-Id: Ib052091cc12865ea0d5db52e468ed6cd28f14840
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
If the high bit in a mask is set, for instance if the mask is
0xff000000, and we shift it to the right by 24 positions, since the mask
was not declared as unsigned we ended up with a mask value of
0xffffffff. We then add 1 to this value and divide by the result,
causing a division by zero crash.
The masks need to be declared unsigned to prevent sign bit extension
when shifting right.
Task-number: QTBUG-29194
Change-Id: I79260344cebfbdd3ea86416a9c734dca76517999
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Revert to the pre highdpi-patch behaviour.
Before, both physical and logical DPI would be based
on the dpmx/dpmy variables, which could be changed
with setDotsPerMeter(). The highdpi patch introduced
separate ldpmx/ldpmy variables, which were not
changed by setDotsPerMeter().
This broke when loading images: setDotsPerMeter
would be called but the logical dpi would not change.
Remove ldpmx/ldpmy. Keep scaling the physical dpi
by the devicePixelRatio, which will be set to 1 by
default.
Task-number: QTBUG-29187
Change-Id: I0d6f5f3b8efae5fb1adc0a50b22a5da78324a282
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Introduces the methods QImageReader::supportedMimeTypes and
QImageWriter::supportedMimeTypes which corresponds to the similar
supportedImageFormats methods, except they return lists of MIME types.
Task-number: QTBUG-28177
Change-Id: Ibb0e264a12eaf972a8bfd6bd891dcd9f89efd085
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This is done to support texture uploads in an image provider. It ensures
we can load the texture using QImage in the image provider, and when
it is later painted as a pixmap, the cacheKey will be identical
(assuming no format conversion was required).
Change-Id: I54229511ed91ce5430cc478af5aff0d96685a2da
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
QRegularExpression counterpart for QRegExpValidator.
Change-Id: Ib391e73dd49e32aeb9b48e6f2217b67a17a83a11
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: I95b8b4b674e85b2b3c374931f6231d60f35be984
Reviewed-by: David Faure <david.faure@kdab.com>
With trailing spaces in some cases, we would not get the
"no justification at end of paragraph" special case, and continue
in the code, getting the unexpected case where line_length becomes
< 0 which would lead to memory corruption because we were writing
outside our buffers. I added an assert to catch this type of bug
earlier, and I added the trailing spaces to the test for the end
of the paragraph.
The test case added is one example which would crash.
Task-number: QTBUG-27354
Change-Id: Id720a6fa55dbc709ce04dd5321e55687bf960d75
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
As they are built-in, they are effectively registered at compile-time
already.
Change-Id: I7ae6ba16088eab5d19213fa7b07c2a7760988a86
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
this is much more elegant than the so far propagated !isEmpty(QT.foo.name).
also replace feature-specific tests (no-gui and no-widgets) and the
obsolete contains(QT_CONFIG, foo) syntax.
Change-Id: Ia4b3c8febcabf9eeca67b1f9173a523820b1038b
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
...and remove the outdated QUnicodeTables::Script enum.
QFontEngineData now has one extra slot that never used
(engines[QChar::Script_Inherited]). engines[QChar::Script_Unknown],
if accessed, would be set with a Box engine instance, and could be used
as a minor optimization some time later.
In order to preserve the existing behavior, we map all scripts up to Latin to Common.
Change-Id: Ide4182a0f8447b4bf25713ecc3fe8097b8fed040
Reviewed-by: Pierre Rossi <pierre.rossi@gmail.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
A pointer to the data of one qimage is used, with an offset, in a copy.
In the mono case, that could lead to overflow: the last row would
of the copy would stretch 1 byte beyond the end of the allocated
area. Fix by reducing the height of the copy, so that it keeps
within the allocated memory.
Task-number: QTBUG-28322
Change-Id: I09abfc83f738f8af000fc50f8c94f63dba3a6cfe
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
We need to do bounds comparison on the actual offset we're going to use
with _mm_load_si128 to read 16 bytes from memory (even though we won't
use the trailing bytes in the end).
Task-number: QTBUG-28324
Change-Id: Id0d6094da796ca67338d8ad225fa6b2f309bbe6e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This test fails on some setups and a pending critical change
causes the existing bug to trigger in CI. To avoid blocking
other changes because of this bug, it's been marked as
insignificant until such a time when it can be fixed.
Change-Id: Ide41f7b1c76209f9c05f95f996b2364d5dea5e67
Reviewed-by: Liang Qi <liang.qi@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
These tests have been failing on certain setups for a while,
but some new critical changes causes the failure to trigger
on the CI system as well. We mark them as insignificant until
they can be fixed.
Change-Id: I467e7030c55d6f23515275b4062c17068d2b688c
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
There are no proper implementations of this API, and as it stands it
only acts to confuse anyone who stumbles across it. It will be better to
revisit the full cross platform orientation API story for 5.1.
Change-Id: Iff7054a32c6e5e4ad0cc0493a5e4ecc35a6ec4f3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
we were already installing them into QtCore/private, so turn them into
proper private headers to start with. this cleans up our project files.
Change-Id: I0795f79e03b60b5854de9e4dc339e9b5a5e6fd87
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
As 672e7c875e did changing pos() to
position() and setPos() to setPosition().
Luckily there's not much code that uses these.
Change-Id: I1e1982f00412a22bd376e667a5e8c30b6149f9b5
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
geometryengine.cpp: In member function 'void
GeometryEngine::drawCubeGeometry(QGLShaderProgram*)':
geometryengine.cpp:159:93: warning: cast to pointer from integer of
different sie [-Wint-to-pointer-cast] geometryengine.cpp:167:95:
warning: cast to pointer f rom integer ofdifferent size
[-Wint-to-pointer-cast]
benchmarking.cpp: In member function 'void TestBenchmark::multiple()':
benchmarking.cpp:85:9: warning: variable 'result' set but not used
[-Wunused-but-set-variable]
benchmarking.cpp: In member function 'void TestBenchmark::series()':
benchmarking.cpp:120:9: warning: variable 'result' set but not used
[-Wunused-but-set-variable]
qstandarditemmodel.cpp:2717:45: warning: unused variable 'd'
[-Wunused-variable]
qxcbconnection.cpp: In member function 'xcb_timestamp_t
QXcbConnection::getTimestamp()': qxcbconnection.cpp:930:40: warning:
suggest parentheses around assignment used as truth value
[-Wparentheses]
tst_qguiapplication.cpp: In constructor
'BlockableWindow::BlockableWindow()': tst_qguiapplication.cpp:340:9:
warning:'BlockableWindow::enters' will be initialized after [-Wreorder]
tst_qguia pplication.cpp:339:9: warning 'int BlockableWindow::leaves'
[-Wreorder] tst_qguiapplication.cpp:342:12: waring: when initialized
here [-Wreorder]
tst_qsqltablemodel.cpp:570:10: warning: unused parameter 'value'
[-Wunused-parameter]
tst_qabstractitemview.cpp:1546:8: warning: unused parameter 'index'
[-Wunused-parameter]
Change-Id: I49c88547182e4669cfde2c2536403fc5573ca2da
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
remove private->public hack, make it build on all platforms;
replace homebrew testing code with QtTest based one
Change-Id: Iaed93fd21938620e58ae90189456df1b8061f2f5
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
For the special transparent color index, the decoder would skip
writing anything out (thus leaving the pixels at 0 rgba value).
Although correct for later frames, for the initial frame this would
loose the color information for such pixels (which one otherwise
could have made visible e.g. by converting then image to an
alpha-less image format).
Change-Id: I316cefce8f21797feedebfbf98296ad84eaa4b99
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
(cherry picked from qt/c309d424f45dc0e7b62fbbbabf20dbfe355f48a7)
Reviewed-by: aavit <eirik.aavitsland@digia.com>
Abbreviated properties are to be avoided. But all 3 of these
properties are redundant from the QML perspective; and because QRect,
QPoint and QSize are (wisely) not QObjects, it's not possible to bind
to _their_ properties, which make these QWindow properties less useful
than users might assume that they are.
Change-Id: I19c00b54b1d2712f9418e8bcf56e35a8008b89ef
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
windowTitle, windowModality, windowIcon and so on are named that way
to be similar to the ones in QWidget. However QQuickWindow inherits
all of the declared properties, and we would like to have shorter
property names in QML. If you are working with a Window then it's
obvious the title property is the window title. Unfortunately,
there must be patches in many other modules which depend on this one.
In order to avoid the need to merge them all at the same time,
there is also patch https://codereview.qt-project.org/#change,39001
which temporarily adds backwards-compatible accessors, which can be
removed after the other modules are able to build without them.
We should not rename windowState to state, because in QML, state
usually drives the state machine for animation transitions etc.
(although QWindow is not an Item, a user might get confused about it).
Related patches are
https://codereview.qt-project.org/#change,39001https://codereview.qt-project.org/#change,37764https://codereview.qt-project.org/#change,37765https://codereview.qt-project.org/#change,37766https://codereview.qt-project.org/#change,37762
Change-Id: Ie4424ec15fbdef6b29b137f90a2ae33f173edd21
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
A 180° rotation results in a TxScale QTransform with negative scaling
factors (x=-1.0 y=-1.0). This is not properly handled by blitter paint
engine yet, so use software rendering fallback in this case.
This rendering issue can be seen when using "-webkit-transform" CSS
property in WebKit with DirectFB QPA platform.
Change-Id: Iee496b6bf0c90ffe36c4235ceaa2c80f296b2ca4
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
These are useful when QWindow is exposed to QML.
Change-Id: I7ec49ef365183e2c784605889e8ea22c2ef34781
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Using
git ls-files -z | xargs -0 sed -i 's/ \+$//'
in the relevant directories.
Change-Id: I861ef9952fb32ed2db9ec8b67864ec7d0d61f0f2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
If a modal dialog was shown as a response to button click, the button
retained its hover highlight, because it didn't get leave event.
Fixed by tracking the most recently entered window and sending a leave
to it when modal dialog is shown that blocks it.
Also modified tst_QGuiApplication::modalWindow() autotest to check
for enters and leaves.
Task-number: QTBUG-27644
Change-Id: I387647e18a762a39d523e3df31221b9583a39f9d
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
in case when the layout is partially initialized.
We shouldn't access any data except of indices
if GlyphIndicesOnly flag has been passed in.
Change-Id: I264689b498e0f9de8b5c040d47dbae4f6ef391c4
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
The code sets it to input.length() iff the regexp doesn't
match the string, while the docs say it's *always* set.
Therefore, make the docs match what the code does and
add a simple test to enforce it.
We're not changing the code to match the docs because
1) it's better to stay conservative (we don't want
to break existing behaviour);
2) this behaviour mimics what the int/double validators do
(they don't move pos at all).
Change-Id: I958074558de6b0fc5944101c6535fc7e00442ae9
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Use the Qt4CompatiblePainting render hint when painting with QPainter to
treat default constructed QPens as cosmetic still.
The NonCosmeticDefaultPen render hint gets documented as obsolete, since
it was in any case not respected by the raster nor OpenGL paint engine.
Change-Id: I04d910e9700baf7f13a8aac07a3633014bb9283e
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
This makes QFont do a "light" detach when the font attributes data has been changed.
The new test clearly shows that the engine is now shared between
two font instances after changing the kerning attribute.
Change-Id: I59db822f459f02d111686dba7101b98e361fada9
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Qt 5 is the time to get rid of all the old inconsistencies in the raster
paint engine caused by trying to preserve the old X11 based
coordinate system where (0, 0) is in the center of the top-left pixel
instead of the upper left corner of said pixel. However, this was only
adhered for line drawing and path / rect filling, and not for image or
pixmap drawing and not at all when doing antialiased painting. By
defining the antialiased coordinate system as being the right one and
letting the aliased fill rules follow from that we finally end up with
some consistent behavior that doesn't lead to surprises and workarounds
in application code.
It is still possible for applications to get the old behavior by
setting the QPainter::Qt4CompatiblePainting render hint. This should
make porting easier for the few cases where an application relies on the
aliased fill rules we used to have in Qt 4.
Task-number: QTBUG-27500
Change-Id: If86b95e77d838ec83033d64af86632b9a73c74a9
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Changed it to check the Frame*Margin property instead of the
Block*Margin property as this was incorrect for a QTextFrameFormat.
Task-number: QTBUG-22173
Change-Id: I2c3066165fb592ed034874b1180593822859f933
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
As of 98c1eb1750, partially initialized
QGlyphLayout is ok for stringToCMap() if GlyphIndicesOnly flag is set,
thus we can use the glyphIndexes buffer directly and avoid copying.
Also add some checks to guarantee we're not falling into an undefined behavior
for the empty text or NULL buffer.
Change-Id: I662953703e4c65edbebabbe4b753972417d963f3
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Cursor dependant auto tests are currently skipped in various ways.
Some are checking PlatformQuirks::haveMouseCursor() that tries to
detect if the desktop environment is MeeGo, using obsolete Q_WS_X11.
Some are skipped if QT_NO_CURSOR or Q_OS_WINCE is defined and
some are actually missing the approriate guards.
=> unify by defining QTEST_NO_CURSOR in qtest-config.h when
appropriate ie. for platforms that have no regular mouse cursor
support or when QT_NO_CURSOR is defined.
Task-number: QTBUG-22551
Change-Id: I9a1e0e3156617945ae46226c79268955454c8a9a
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
This case has typically required specific work-arounds in other
rendering paths as well.
Task-number: QTBUG-25153
Change-Id: I217e710a30222792ebca3bf297e438d944c32992
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This reverts commit 101d04681f.
That change seems to have introduced a few regressions, and
Creator hits an assertion that it introduced because it assumes
the additionalFormats consists of well-formed ranges
(QTCREATORBUG-7995).
Change-Id: Ic4ae761e6e7f6df8a6b5ca565ceb250647420c15
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Q*Validator classes are not in QtWidgets,
so move them where they should stay.
Change-Id: Ie6ea45a026e640fad131002bc9762c575235f3f4
Reviewed-by: David Faure <david.faure@kdab.com>
There are now two different ways to implement synchronous
event processing. The platform plugins can choose which
one to use.
1) flushWindowSystemEvents()
Use to flush the event queue at one point, making
preceding calls synchronous.
2) setSynchronousWindowsSystemEvents(bool enable)
Makes all handle* functions synchronous, bypassing
the event queue completely.
Change-Id: I020b80c731fd13f855a377d7c91d06a4e39b6a0b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
This guarantees one will never get `!img.isNull()` after
load()/loadFromData() has failed, even if the image was
not null before.
Apply the same fix to QPixmap and QPicture.
Change-Id: Ida1ad6a6f0fc830df8e75ada0c163fc2d3360dea
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
They have unexpected results in Qt 5 (the Qt::GlobalColor one works
as expected in Qt 4, but was removed in Qt 5):
QVariant v = QVariant(Qt::red);
qDebug() << v; // QVariant(int, 7)
v = Qt::red;
qDebug() << v; // QVariant(int, 7)
The correct way is to use:
QVariant v = QVariant::fromValue(QColor(Qt::red));
The deleted constructors are the ones for which there is a class
with an implicit constructor taking the enum, and that class is
a built-in metatype.
QLocale::Language and QKeySequence::StandardKey would also fit
the description, but I can't include the header for QKeySequence
as it is in QtGui, and I don't want to include the qlocale header
in qvariant.h. Putting a QLocale::Language is probably very
uncommon anyway.
The QTextFormat test is doing the wrong thing, but the result isn't
being tested. Added new tests which fail before the patch.
Change-Id: Ia38a0784990f4d40ff7457a86daf58aabd4964eb
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The icon engine behind icons that are loaded from QIcon::fromTheme does
not scale any pixmaps that it returns. When using an icon theme with an
incomplete set of icons (for example, only a "128x128" folder),
QIcon::pixmap will always return 128x128 pixmaps even if you ask for
one of size 22x22.
This is contrary to the QIcon::pixmap documentation that says "The
pixmap might be smaller than requested, but never larger."
This patch uses the same code that is in the main QIcon class in the
PixmapEntry QIconLoaderEngineEntry to scale pixmaps if they are too big.
Change-Id: Ic25a3628ac82cfb899574245f658490a2dd49d54
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
This is useful when the additional formats are used on a
text layout using a raw font. It can also come in handy for
input methods operating on a QTextDocument.
We now consider all format range edges to generate the
associated items. The capitalization can be overridden via
the additionnal formats mechanism.
Adds an autotest that checks that this works with font capitalization.
Change-Id: I782d2c48d05b0dfbad480a9ca77198465292b358
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Expecting results were not correct. The test is passing.
Task-number: QTBUG-22362
Change-Id: Ie41c262019f76aace9062d7897d7934dc7437c3a
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Use PlatformClipboard::isAvailable() and fix build
when QT_NO_CLIPBOARD is defined.
Change-Id: I18c3af42fe39cf7618c2530723149848a10db985
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
The back-end might report screen orientation changes at any point and we
record it in screen.d->orientation. However QScreen::orientation()
returns the orientation filtered according to the mask.
Changing the mask sends a notification to the back-end, which might send
another update as a result of a possible subscription to system services
(accelerometer). However on platforms where no subscription is required, where
the platform plugin ignores the mask and always sends the latest orientation,
we should "simulate" the update by updating the filtered orientation according
to the new mask. The function is cheap to call as it won't emit any signals
unless the orientation actually changes.
This patch also adds missing flush() calls after handleScreenOrientationChange
calls in the tests to ensure that the (synthetic) window system events are
actually delivered to QScreen/QGuiApplication.
Change-Id: Iebdd050f947e658ff5bc388629aa4cb31ab497fe
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Commit ef2efafcc6 introduced a call to
QWindowSystemInterface::sendWindowSystemEvents() in
QGuiApplicationPrivate::init(), which in its implementation ends up calling
sendPostedEvents() before flushing and processing any pending (internal) window
system events.
This patch changes the call in init() to use
QWindowSystemInterface::flushWindowSystemEvents() instead, which is more gentle
in that regard.
The provided unit test verifies that no posted events are processed during the
execution of the QGuiApplication constructor while at the same time verifying
what the original changed tried to do: Allow a generic plugin to provide window
system specific defaults that are implemented using the event queue of
QWindowSystemInterface.
Task-number: QTBUG-26886
Change-Id: I129a907c00d947df60fe1a02efc67857580fce24
Reviewed-by: David Faure <faure@kde.org>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Introduce QCharAttributes and use it instead of HB_CharAttributes everywhere in Qt
(in Harfbuzz, the HB_CharAttributes is only used in the text segmentation algorithm
which has been moved from HB to Qt (well, most of it)).
Rename some members to better reflect their meaning,
remember to keep HB_CharAttributes in sync with QCharAttributes.
Also replace HB_ScriptItem with a (temporary) QUnicodeTools::ScriptItem struct
that will be replaced with a more efficient/friendly solution a bit later.
The soft hyphen and the mandatory break detection has been factored out
of the default text breaking algorithm to a higher level in order to refactor
the QCharAttributes bitfields and to optimize the implementation for the common case.
Change-Id: Ieb365623ae954430f1c8b2dfcd65c82973143eec
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
A modal window in front in the modal window list should never be blocked
by a modal window further back in the list. This was taken care of in
QGuiApplicationPrivate::isWindowBlocked(), we just need to make sure it
gets called when a new modal window gets shown so that its blocked
status is up to date.
Task-number: QTBUG-27206
Change-Id: I590f1715e66067edb178081352636f34fe54a885
Reviewed-by: Tim Jenssen <tim.jenssen@digia.com>
A horizontal line should round up at the same time as a vertical line
with square cap, when rendering at subpixel coordinates. Thus, the
special casing in the cosmetic stroker of offsetting by half a pixel
should be for flat caps instead of for square caps.
Task-number: QTBUG-26013
Change-Id: Ic09249337f814c7de95a17976ec9e651561a744b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Changing it outside of the test function definition to avoid running
empty/inapplicable test functions.
Change-Id: I713560cde7f715696984ed082d682900f5f1bcdd
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Caroline Chao <caroline.chao@nokia.com>
Introduced by 2e0003eda4. We were
missing a attributesEmitted=true which caused the output from
toHtml() to sometimes be invalid when using pixel sizes to
specify the font size.
Task-number: QTBUG-25778
Change-Id: Ied61fcaef425a590d71c0b52292ac676cb88ba52
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Jiang Jiang <gzjjgod@gmail.com>
This corrects the mismatch between using floats for internal storage
and qreal in the API of QVector*D which leads to lots of implicit
casts between double and float.
This change also stops users from being surprised by the loss of
precision when using these classes on desktop platforms and removes
the need for the private constructors taking a dummy int as the final
argument.
The QMatrix4x4 and QQuaternion classes have been changed to use float
for their internal storage since these are meant to be used in
conjunction with the QVector*D classes. This is to prevent unexpected
loss of precision and to improve performance.
The on-disk format has also been changed from double to float thereby
reducing the storage required when streaming vectors and matrices. This
is potentially a large saving when working with complex 3D meshes etc.
This also has a significant performance improvement when passing
matrices to QOpenGLShaderProgram (and QGLShaderProgram) as we no
longer have to iterate and convert the data to floats. This is
an operation that could easily be needed many times per frame.
This change also opens the door for further optimisations of these
classes to be implemented by using SIMD intrinsics.
This needs to be applied in conjunction with
https://codereview.qt-project.org/#change,33548
Task-number: QTBUG-21035
Task-number: QTBUG-20661
Change-Id: I9321b06040ffb93ae1cbd72fd2013267ac901b2e
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Previously QImage::fill() for Format_RGB888 expected a BGR value
instead of the RGB order defined by QRgb, making it counter intuitive to
use related to the 32-bit formats.
Fixed the QPixelLayout data for RGB888 and changed the byte order of
quint24 based on what the optimized image conversion routines expect.
Change-Id: I72926debbc6f5b5cb10b8aa0b2a2a916a04db946
Reviewed-by: Kim M. Kalland <kim.kalland@nokia.com>
Change d060b6f04f introduced some
new properties to QTextFormat which were unfinished and did not
match the documentation in the same change. I've updated the API
and docs to use the regular QFont enum for letter spacing type
instead of introducing bools (which inhibits expansions later)
or mutually exclusive properties in the text format.
Change-Id: Ife44993b6746c413e421fdaf92ebaaab6ba95977
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The current implementation of qIsNull only returns true if the value is
positive zero. This behaviour is not useful for use cases like
QPointF::isNull, where QPointF(-0, -0).isNull() will return false.
There doesn't seem to be a reason why the function exhibits this
behaviour (-0.0 is not accounted for in the unit tests), and for the
case of QSizeF::scale it causes a bug: qIsNull is used to check for
division by 0.0 before it proceeds, which fails in the case of -0.0.
Task-number: QTBUG-7303
Change-Id: I767e5280bd26614e8e78ae62b274eb9bc4ade385
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Windows CE does not have support for GetGlyphOutline.
So addGlyphToPath will not work. QML uses it for their
distance field rendering. One option to bypass this issue
is to use freetype as rendering backend.
Change-Id: I965254344945cbdad771a5d505fb61c1cc2087df
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Add new qt_handleXXX functions that forward to the QWindowSystemInterface
functions, and use those in the testlib inline functions. Remove use of
struct QWindowSystemInterface::TouchPoint from the testlib header files
(requiring some slight increase in ugliness in the two tests that use
that struct).
Also remove the qmake hack that adds private headers to all tests
Change-Id: Iec23537e55a44802f6e9cd463f7a0f82007c5250
Reviewed-by: Paul Olav Tvete <paul.tvete@nokia.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This allows to check whether QMetaTypeId2::MetaType exists, and can help
turn run-time into compile-time expressions, even without constexpr support,
or in situations where constexpr can't be used (because you can't overload
on it). This was designed for the QMetaType::registerConversion feature,
but it's much more widely applicable.
Change-Id: Iafa04add04bcb531b3f7fe3e751c7e91ee6a3bc0
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Remove usages from autotests with the exception of
widgets/kernel, widgets/widgets and widgets/graphicsview.
Change-Id: I917b2857ed0cd07a6b3dbcd69244f558086c6586
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
While the qWaitForWindowShown(QWidget *) is inherited
from Qt 4.8, the qWaitForWindowShown(QWindow *) was introduced
in Qt 5. As it is identical to qWaitForWindowExposed()
and removed already, it can be deprecated in Qt 5.
Remove its usages in qtbase.
Change-Id: I28788d120ad687a49f02b2b44de6b38a2832fe5c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This makes development on the meta type system easier because only
QtCore must be re-built to run most of the tests. The existing
QGuiVariant test needs to be run before pushing anyway, but not
so frequently.
Change-Id: I1fa66edbd790c957e1a232226847dd550227a477
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
No need to pass the dispatcher. Get rid of Windows logic to maintain
a stack of dispatcher associated with flags.
Change-Id: Ic2daad4b6762a46fac3274937effc188af436c9a
Reviewed-by: David Faure <faure@kde.org>
- Implement waitForWindowExposed() for toplevel windows.
- Implement waitForWindowShown(QWidget *) and mark as
deprecated in line with waitForWindowShown(QWindow*).
- Use in tests.
- Simplify tests (collapse waitForExposed, setActive
into setActiveWindow, waitForActive), remove most
hard-coded timeouts.
- Stabilize graphicsview tests by using waitForWindowActive.
Change-Id: Ic7c061e2745b36f71a715ee4e47c0346b11a91e8
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
When you're inserting a column in front of a rowspanned cell
and this cell is not the first in the rowspan, we would get
the wrong logical index of the new cell (putting it in
front of the initial cell with the rowspan). If the cell
does not span all rows, the table will get into a broken state
and trigger asserts in update(). To fix this, we search for
the first cell after the insertion point which has a logical
index higher than the cell directly before the insertion point.
Change-Id: I42e91a20d77b2ba9c5607f6cab23f51ed888cbd3
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Change-Id: I19d3b2e9a5180b13deb828b55195404ef20be295
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Export of color transparency component is added for cases where color
is exported to html. New static function colorValue() is added to
prepare CSS string representation of QColor. When the color is opaque,
it falls down to QColor::name() method which was used previously,
otherwise it returns 'rgba()' CSS statement or 'transparent' keyword in
case transparency is 0.
6-digit precision is used for alpha value as it's maximum which can be
processed properly by Gecko and Webkit engines
(http://lists.w3.org/Archives/Public/www-style/2009Dec/0295.html).
Import part for rgba() statement was also added to QCssParser. It
supports rgba() color values as stated in CSS Color Module Level 3
(http://www.w3.org/TR/css3-color/#rgba-color).
Import of undocumented statement 'rgba(int,int,int,int);' was also
added to preserve regression test success and to provide compatibility
with previous code relying on this behaviour.
Test cases added to QCssParser autotest for rgba(int,int,int,float)
statement and to QTextDocument autotest for rgba(int,int,int,float)
and 'transparent' statements for certain 'color', 'background-color'
and 'bgcolor' properties.
Change-Id: Id341c4e800249820d52edef8003e50f9a74d062b
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
removed printsupport tests for wince as there
is no print support on wince and removed the special
handling for wince from 4.8 on some tests as the dependent
modules are not part of qt base anymore
Change-Id: I4ffb22da11f98beee1013f775cb5ce4b936d3211
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Make test projects declare TEST_HELPER_INSTALLS rather than calling a
function exported by testcase.prf. load(testcase) may be unsafe, as
testcase.prf should be processed after default_post.prf.
Fixes silent disabling of various autotests.
Change-Id: I56b35ffd653a637ad5ab18d64dd1a1edadfac59f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
We only want to change the capitalization if the QScriptAnalysis flag
was Lowercase, Uppercase or SmallCaps.
Task-number: QTBUG-17485
Change-Id: Icbecb09b06a9153866ae81d592b3f6779c2dafb5
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
The dependencies on QFont, QBrush, QIcon are all in QtGui, so there's
little sense to still have these classes in QtWidgets.
This also copies and pastes a version of QWidgetItemData as
QStandardItemData inside qstandarditemmodel_p.h.
Change-Id: Ibafc5a30748e7ce0b54753309ae6dc4a797fc20e
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Source files which contain UTF-8 literals can not be compiled
by MSVC with Chinese/Japanese locale.
Change-Id: I5daa2e45c5e1ceb86da91e72288c24018c49c0f6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
We need to let the QGuiApplication determine whether quitting is appropriate
based on whether there are visible top level QWindows after the last top-level
QWidget was closed.
This solves the issue raised here: http://thread.gmane.org/gmane.comp.lib.qt.user/1880
The transientParent is the QWindow equivalent of parentWidget on QWidget, so the test
in QGuiApplication::shouldQuit is similar to the one in QApplication::shouldQuit.
Change-Id: I500eff8d5887f24415180134b3a4be3c630a896f
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
to make it conformant to the Unicode 6.1 specifications #14 and #29.
The most important changes are:
* The implementation has been reworked from scratch to fix all known bugs;
* Separate-out the grapheme and the line breaking implementation to eliminate
an overhead due to calculating unnecessary breaks;
* Stop using deprecated SG class in favor of resolving pairs of surrogates;
* A proper support for SMP code points;
* Support for extended grapheme clusters (a drop-in replacement for the legacy
grapheme clusters as of Unicode 5.1);
* The hardcoded tailoring of UBA has been eliminated which breaks the 7 years-old
lineBreaking test. Some later, we'll investigate if such a tailoring is still needed.
Change-Id: I9f5867b3cec753b4fc120bc5a7e20f9a73d89370
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This supercede https://codereview.qt-project.org/#change,25111 and fixes
some more cases;
The autotest crash is fixed as well (but the test itself omitted due to
.pro file misconfiguration)
Change-Id: I4a3adde18b4f9a8ac9822f700eee71d2a12b9c2c
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
to keep them consistent with positions for all other flags.
This changes the internal behavior so that attributes[0].lineBreakType now means
"break opportunity at start of the text (before the first character in the string)"
and is always assigned with HB_NoBreak to conform rule LB2
(see http://www.unicode.org/reports/tr14/#LB2).
The current implementation is based on the sample implementation from tr14
that aimed to be as simple as possible rather than to be optimal.
From now, we can use pieces of the attributes array "as is"
without having to adjust some positions. Or we can analize some long text
by chunks (e.g. paragraph by paragraph) and consume less memory.
This introduces a minor overhead that will be eliminated shortly.
Change-Id: Ic873a05a9d5203b1c3d5aff2e4445a3f034c4bd2
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
tst_QWindow::positioning() still fails on Mac OS X, and it does so in
several places. Skip this test for now as it causes isActive() to fail
as well. With positioning() QSKIP()ed, all the other test functions
pass:
Totals: 19 passed, 0 failed, 1 skipped
********* Finished testing of tst_QWindow *********
Task-number: QTBUG-23059
Change-Id: I58d036120c0121f515813cd20955ab3b82f81fe1
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
When switching the active window within the same application, Cocoa
sends us an NSWindowDidResignKeyNotification for the old activated
window, then an NSWindowDidBecomeKeyNotificationfor the newly activated
window. Our handling of this would first set Qt's active window to zero,
then immediately reset it afterwards. Avoid this by checking the key
window when handling the deactivation event, and don't set the active
window to zero if a new window has become active.
Task-number: QTBUG-24322
Change-Id: I8719fc501049eeaaebb75e9ea03261b2209458b6
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
It might be too expensive to always have an accelerometer sensor
running, so introduce API so that the application has to explictly ask
to get the orientation updates it's interested in.
Change-Id: Ib7dc5ad8807718409f744ebef53f4476aa05175d
Reviewed-by: Ian Monroe <ian.monroe@nokia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Reviewed-by: Kevin Ottens <kevin.ottens.qnx@kdab.com>
The use of QWeakPointer for tracking QObject pointers is to be
deprecated.
Change-Id: If460ca7f515db77af24030152f4bd56e1a5fae7c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Should be sufficient to allow implementing the actual functionality in
xcb/cocoa/windows to match the Qt 4 level of tablet event support.
Task-number: QTBUG-25864
Change-Id: Iebcca256dfba841d8976b58fda1b76026d3133a3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
These tests have passed a parallel stress test on all three of Linux,
Mac, Windows. Mark them with CONFIG+=parallel_test to allow CI to run
them in parallel, saving time.
Change-Id: I19fd333c3c645a67374ca998f6c8530dd236b0f8
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Calling handleMouseEvent() with w == 0 implies that the local position
is bogus and instead it should be calculated from the global position
once the target window is known.
Change-Id: If173d0570f6dcc8b7bc5d6f21fa1f69d06d9d702
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@nokia.com>
QChar is actually a ushort and passing it via const-ref is suboptimal
Change-Id: Ib806b90397de6a816142ed130a22c0fe10a85d79
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
- Move the files and tests
git mv src/widgets/kernel/qicon* qrc/gui/image/
git mv tests/auto/widgets/kernel/qicon/ tests/auto/gui/image/
- update the include of QIcon
git grep -O"sed -i s,QtWidgets/qicon,QtGui/qicon," "QtWidgets/qicon"
git grep -O"sed -i s,QtWidgets/QIcon,QtGui/QIcon," "QtWidgets/QIcon"
- Adapt QIcon \ingroup documentation
sed -i s/QtWidgets/QtGui/ src/gui/images/qicon*
- Adapt export macro
sed -i s/Q_WIDGETS_EXPORT/Q_GUI_EXPORT/g src/gui/image/qicon*
- Update .pri and .pro files
- Remove the use of QStyle::alignedRect by copying its content (and
adapt slightly
- Use QGuiApplication::palette() instead of QApplication::palette()
- Add a hook in QGuiApplicationPrivate to call the
QStyle::generatedIconPixmap() from QtWidgets
Another commit follows to adjust QMetaType::Icon and move the QVariant
and QMetaType icon handler back in QtGui
Change-Id: I1b63759f892ebc02dfc30f41bb6e76e0b7451182
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
QTextLine::cursorToX returned the line width for cursor positions
outside the width of a wrapped right to left line because the
leading space width was always calculated as 0.
Returning a non-zero width for the leading space does cause
problems for other uses of QTextEngine::alignLine() though
as the textAdvance already doesn't include the leading/trailing
space so subtracting it there double accounts for it.
Task-number: QTBUG-24801
Change-Id: I56cbb139814c32813bebb49de8c045b29154a958
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
e.g. in QStaticText, the data is used just to get the line's y-position
and re-calculates just after the loop to determine the bounding rect and to draw the text;
in QWidgetLineControl, the data re-calculated over and over while the result
is seems to remain the same; probably the caching is needed here too
Change-Id: I0f7eb291532f63eccb9c5f749daebb73ff90632f
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Because the QPA font database would query fallback families inside
findFont(), support for requesting multiple font families in order
of preference (like QFont("Times New Roman, Arial")) did not work,
because the Arial fallback was never attempted. To fix this, we
pass in the queried fallbacks and make sure they are tried before
any platform specific fallbacks.
Task-number: QTBUG-20986
Change-Id: Idb2b717856f013ce2874f00a8debaff60176d2fc
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
texts for the textKeys are stored each in a separate COM(ment) section
so that the maximum text's size is almost 65KB
Task-number: QTBUG-10568
Task-number: QTBUG-111
Change-Id: I7d693741e10e5d78d497cb0af448160077350bb2
Reviewed-by: aavit <qt_aavit@ovi.com>
If the next active window is already known at the time a focus
out is received, pass it to QWindowSystemInterface.
Fixes a test and Qt Creator's locator bar.
Task-number: QTBUG-24186
Task-number: QTCREATORBUG-1
Change-Id: I0aed4c386c08ed182555c95640e1637c5b67f5ce
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The main reasons for doing this are:
1. _qpa.h end up in the master QtGui include file. QtGui is meant for
userland applications. qpa code is neither binary nor source compatible.
Inadvertant use of QPA api makes the user code binary-incompatible.
2. syncqt creates forwarding headers for non-private header files. This
gives people the impression that this is public API.
As discussed on the mailing list, even though QPA api is internal and subject
to change, it needs to treated differently from private headers since they
will be used by in-qtbase and out-of-qtbase plugins.
This commit does the following:
1. The _qpa in QPA header files is dropped.
2. syncqt now treats any file with qplatform prefix as a special file and
moves it to qpa/ directory. The recommended way of using QPA API in plugins
is: #include <qpa/qplatformfoo.h>. This allows the user include QPA API
from multiple modules (for example, qplatformfoo might be in QtPrintSupport)
3. The user needs to explicitly add QT += <module>-private to get access to
the qpa api.
4. Creates compat headers for the olden style qplatformfoo_qpa.h and QPlatformFoo
includes.
This commit does not change the cpp filenames. This requires a more careful
merging of existing non qpa cpp files and existing cpp files on a case by
case basis. This can be done at anytime.
The following files are not renamed as part of this changed but will be fixed
as part of a future change:
src/gui/kernel/qgenericpluginfactory_qpa.h
src/gui/kernel/qgenericplugin_qpa.h
src/gui/kernel/qwindowsysteminterface_qpa.h
files were renamed using
for x in `find . -name "qplatform*_qpa.h"`; do git mv $x "${x/_qpa.h/.h}"; done
for x in `find . -name "qplatform*_qpa_p.h"`; do git mv $x "${x/_qpa_p.h/_p.h}"; done
includes were renamed using script
for file in `find . -name "*.h" -or -name "*.cpp" -or -name "*.mm"`; do
sed -i -e 's,.*#.*include.*<\(Qt.*/\)\?\(QPlatform.*\)>,#include <qpa/\L\2.h>,g' \
-e 's,.*#.*include.*"\(Qt.*/\)\?\(QPlatform.*\)",#include <qpa/\L\2.h>,g' \
-e 's,.*#.*include.* "\(qplatform.*\)_qpa.h",#include <qpa/\L\1.h>,g' \
-e 's,.*#.*include.*"\(qplatform.*\)_qpa_p.h",#include <qpa/\L\1_p.h>,g' \
-e 's,.*#.*include.*<\(Qt.*/\|Qt.*/private/\|private/\)\?\(qplatform.*\)_qpa\(.*\)>,#include <qpa/\2\3>,g' \
-e 's,.*#.*include.*"\(Qt.*/\|Qt.*/private/\|private/\)\?\(qplatform.*\)_qpa\(.*\)",#include <qpa/\2\3>,g' \
$file
done
Change-Id: I04a350314a45746e3911f54b3b21ad03315afb67
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
This test is passing for Windows now in CI due to recent fixes, so
remove the insignification.
Change-Id: Ib74aea443c4a66c9bf743d88e15d9f27f9ac2fe4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I2850033159508ebb1ff7564e15b99a146dbee94c
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
It seems that this case is failing on CI because OpenGL version,
so skip if OpenGL is not recent enough.
Task-number: QTBUG-24192
Change-Id: I543e7a092e5c107ee57cd9dce7dc5c890a0315cf
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
qVariantValue and qVariantCanConvert are Compatibility members, while in
Qt4.8 they are marked as Qt 3 Support Members.
qVariantFromValue and qVariantSetValue are Obsolete members.
Change-Id: Ie8505cad1e0950e40c6f6710fde9f6fb2ac670fd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
