Commit Graph

7905 Commits

Author SHA1 Message Date
Oswald Buddenhagen
61bcd838fa automatically add the module version headers to %classnames
Change-Id: I7706a0d54e704320e9e1e480b387e46417739ccf
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:40:05 +02:00
Oswald Buddenhagen
e203e42906 automatically add the version header to HEADERS
Change-Id: I7c2e1d852ebdbc5cca7a3a31ab2b4c9ab9faffd9
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:40:04 +02:00
Oswald Buddenhagen
92c76ffcf1 factor out qt_module_headers.prf
this doesn't make too much sense as such, but the file will grow.

Change-Id: Iceaecdc24f83b3dafb40c8d2f1b6cddafa2d70a1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:40:04 +02:00
Oswald Buddenhagen
94bd205575 make sure that forwards for injected headers are not garbage-collected
qmake-generated version headers don't exist yet at the time syncqt runs,
so the forwarding headers would be deleted - just to be re-created a
moment later, thus changing the timestamp for no good reason.

Change-Id: I1b4c2f05f57c2315adf4b8dd726ea413ede1be5b
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:40:04 +02:00
Oswald Buddenhagen
912f7efbd4 fix status output for generated headers
Change-Id: I92c250037eb1b1838998cddbaea6ca065153e86e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:40:04 +02:00
Oswald Buddenhagen
b2dc56d5cf make headers.pri locality determination less convoluted
the location is determined by syncqt rather precisely. no need to
reverse-engineer config files.
$$HEADERS_PRI doesn't seem used anywhere, so don't set it as a side
effect.

Change-Id: I54a63356c350c0ddae4c880bf374fcd127282429
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:40:03 +02:00
Oswald Buddenhagen
a8ad1e77ba generate fwd-pris in qt_module_config, not in syncqt
the forwarding pri is loaded even if it was still created by syncqt, so a
top-level qmake -r will still catch it even in the future.

Change-Id: I2e4b556cd06eb88be9ee378662a2e6e1bff67ad7
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:40:03 +02:00
Oswald Buddenhagen
d31f4a560d bring statements into a somewhat logical order
Change-Id: I7bfbcd414bd2c8ff82e210c075b88f1ca00d3b73
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:40:03 +02:00
Oswald Buddenhagen
a18bd8203d remove qt from CONFIG for non-artifact templates
there is no point in adding Qt modules to SUBDIRS projects.
as QT contains core and gui by default, the operations are relatively
expensive, so skip them when they are unneeded.

Change-Id: Ibe6447ff452e403cb040fabe245d248edbda0eaa
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:40:03 +02:00
Oswald Buddenhagen
ffa2e1d007 define have_target CONFIG flag
the check whether we are building a lib or an app (and thus have a target)
is done by quite some feature files (and generally wrongly, as they do not
account for the new aux target), so centralize it in default_post.prf.

Change-Id: I868edbc4185be8a6c23ecd4a2c126024d73cdeb4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:40:02 +02:00
Oswald Buddenhagen
e7b9600103 add possibility to install a module with no library
the declarative module is a fake, so there is no library to install.

Change-Id: I0dcd39f3304e38adce9ea34e2268905525abd3d5
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:40:02 +02:00
Oswald Buddenhagen
c23767bab9 make version fallback code sane
the qt version is always set.
otoh, we need to allow the module to override the own version.

Change-Id: Ic3eb7dae59a5fb011cede09151553b652a0a1d78
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:40:02 +02:00
Oswald Buddenhagen
a07d4f8fb3 remove some symbian cruft
- Option::mmp_ext
- references to dead QMAKE_INTERNAL_ET_PARSED_* variables

Change-Id: I863605b23798cbca3f6c8ab5a154fd432f1f4dcc
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:40:02 +02:00
Oswald Buddenhagen
7d44bd0646 remove last traces of js support
don't even complain about trying to use js-based feature files. we have
been doing that for long enough.

Change-Id: Ib58ec204322442c488e8d780989f26b1e32595ed
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:40:01 +02:00
Oswald Buddenhagen
0202e15617 remove explicit RCC_DIR addition to INCLUDEPATH
qrc_ files are generally not meant to be included, so there is not much
point in doing this.
qprintsupport was a notable exception - which broke on mac and thus
needed a hack. just remove the qrc_ inclusion.

Change-Id: If5115665f331a280869e800673bf7b81d3ab559a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:40:01 +02:00
Oswald Buddenhagen
10075973e2 make qmake module path configurable separately
this is needed by webkit's creative directory layout.

Change-Id: I2317162c11696d2820423d63563b10d3024a6cb6
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:40:01 +02:00
Oswald Buddenhagen
45711a8b73 write forwarding pris to $outpath/mkspecs/modules
this makes qmake find them automatically now.
consequently, also do not write QMAKE_EXTRA_MODULE_FORWARDS to
.qmake.cache. still write the cache file, though, as otherwise a
top-level cache would mess up the module root detection.

Change-Id: I998b94fcc73ca3f8bf1af09a394ff8d40cf1fb76
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:40:01 +02:00
Oswald Buddenhagen
4aef57e02c remove useless variable assignment
Change-Id: I3552305473cd0150d83c1e2a3c9fb0c4097244cc
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:40:00 +02:00
Oswald Buddenhagen
926cf05f80 rename QMAKE_SYNCQT_OUTDIR => MODULE_BASE_OUTDIR
a variable name should not reflect the tool which uses it, but its
purpose - especially, as the scope will be extended soon.

this variable is used by webkit, which has a somewhat creative directory
layout.

Change-Id: Id3d3fad6ed9395cb967aeabc79e47a0ba17f5423
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:40:00 +02:00
Oswald Buddenhagen
ad92c6c7de make splitPathList() return an empty list for an empty string
this makes the user code a bit cleaner

Change-Id: I3713c73c5c19cf69341be65480917eda0b967b77
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:40:00 +02:00
Oswald Buddenhagen
f4b7e33c0b make qt_module_config.prf install the module pri file
absorb module.prf into qt_installs.prf, as that's where it belongs.
add qt_install_module option and automatically set it in
qt_module_config. make qt_installs use that option.

Change-Id: I860616f3a29a456f7b88ddaffa09375400c8911e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:40:00 +02:00
Oswald Buddenhagen
84fb7be6c1 make qtAddLibrary() a noisy compat wrapper for qtAddModule()
it's used by people (in particular, qt creator), so it would be not nice
to just delete it entirely.

Change-Id: I6bd849d00ebfe3b9b126e01a6d1c6e7c6584d8ac
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:39:59 +02:00
Oswald Buddenhagen
c4eed770be purge QMAKE_INCDIR_QT and QMAKE_LIBDIR_QT
they are equivalent to QT_INSTALL_(HEADERS|LIBS)/get.

Change-Id: Ic4b47f3ca7db55785b96f19020a2fa020a8d25bd
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:39:59 +02:00
Oswald Buddenhagen
9206932105 simplify code which determines how/where to create forwarding pris
the qtbase install dir being a build dir is a necessary and sufficient
condition for detecting a developer build.

Change-Id: I3d98c789ac6fbe570980459edabb9a941bf1e5d6
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:39:59 +02:00
Oswald Buddenhagen
ab9f0e694f move $QTDIR handling out of syncqt
instead, always pass -qtdir (which, btw, is a slight misnomer - it
should be -qtdatadir) with the correct path. this centralizes the
relevant logic in default_pre.prf.

Change-Id: Icc788d3f3e5f7b68b444e63e181efdea3b4ef160
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:59 +02:00
Oswald Buddenhagen
8b822825c5 make use of $$[FOO/get] properties
this cleans up a lot of hacks supporting the build of qt, including the
last bits of $QTDIR.

Change-Id: Id119886ed8097967dad6cf86ebd4e71d90c42841
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:39:58 +02:00
Oswald Buddenhagen
6a8f64136e introduce /get property variants
properties are now split into a write location $$[FOO] and a read
location $$[FOO/get]. the write locations are hard-coded and configurable
via qt.conf/Paths as before, while the read locations are configured via
qt.conf/EffectivePaths.

this finally provides a clean solution to the problem that during the qt
build itself tools and libraries need to be taken from somewhere else
than they are installed to.

Change-Id: I956c43bd082afd465e690fe75d0bee3c2c0f7c25
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
2012-06-19 16:39:58 +02:00
Oswald Buddenhagen
ab0d55e361 purge unused VcprojGenerator::findTemplate()
it looked fishy for years. now i know why. ;)

Change-Id: I822cadecaf8d914f383f9f907b92507852e434b4
2012-06-19 16:39:58 +02:00
Oswald Buddenhagen
b35d8e651b don't generate make_default targets
make_first really means the same, as the default target is 'first'
which immediately invokes make_first.

as a nice side effect, this fixes ALL_DEPS not being used by the subdirs
template's default target - make_default wasn't special-cased in the
right place, while make_first is.

Change-Id: I946cea3b2dae198eda61d31dbd19c6ccd15deac7
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:58 +02:00
Oswald Buddenhagen
c85dc033dc add $$reverse() function
returns the list with the order of the elements reversed.
one can easily implement this with existing functions, but this is way
faster and more readable.

Change-Id: I12d306eb9fe58fc332622274ea6b658192529491
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:39:57 +02:00
Oswald Buddenhagen
083f7c501f add $$shell_quote() function
to be used in system() calls and when assembling EXTRA_COMPILER and
INSTALLS .commands by hand.

Change-Id: Id706cd56aa267a9fb4b14e3416692b4716fafa5b
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:57 +02:00
Oswald Buddenhagen
09e01856b0 add $$absolute_path() and $$relative_path()
just exposes QDir::fooFilePath() wrapped into QDir::cleanPath()

Change-Id: I7a7644084825fd8092a9910ac20f695c4d9351f6
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:57 +02:00
Oswald Buddenhagen
d8e6c49bfa add $$native_path() function
more or less QDir::toNativeSeparators(QDir::cleanPath())

Change-Id: I52deee1e8086559eda5833b387a0cf64d21cbcd9
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:57 +02:00
Oswald Buddenhagen
f97913f2da add $$clean_path() function
just QDir::cleanPath()

Change-Id: I2d51e2385939d8926c00f296537ab7f6757d9a79
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:56 +02:00
Oswald Buddenhagen
1261c9b2f4 add $$format_number() function
Change-Id: I04266c1f5fb72af94073f3f508cee59085e365b6
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:56 +02:00
Oswald Buddenhagen
bf984d5f24 add $$shadowed() function
return the build directory corresponding to a given source directory.
this is the identity function if not shadow-building. if input lies
outside the source directory, return empty value.

Change-Id: I2d2a6b1112bd19989fe29cfe19a12d39a0d208c1
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:56 +02:00
Oswald Buddenhagen
6a66fef520 add $$val_escape() function
this quotes the elements of a variable in a way suitable for re-parsing
as qmake code.

Change-Id: I0e6ea2478c43b5aeff45f485a48ac8c86705dd4a
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:56 +02:00
Oswald Buddenhagen
ade089907b add $$enumerate_vars() function
this simply returns the keys of all variables in the context.

Change-Id: I0092f827744fcd257dfb9e7ca664c87c6f1cc763
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:39:55 +02:00
Oswald Buddenhagen
1388199d4f make defined() support testing definedness of variables
Change-Id: I58d2dd402d72ee5a19012a6b5a4ba111717d40cc
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:55 +02:00
Oswald Buddenhagen
7da934d776 add mkpath() function
Change-Id: I8809b9ee4e85fbe8cec95641d659f237c5f51a26
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:55 +02:00
Oswald Buddenhagen
b500397809 add log() function
this is a literal print to stderr.

Change-Id: Ib0a2f53373ebbc4e0bda07a38d656bce145b31cf
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:54 +02:00
Oswald Buddenhagen
064a5a08d2 add touch() function
this is equivalent to unix "touch --no-create --reference <ref> <file>".
QFile has no setLastModified() (even though QFileInfo has
lastModified()), so the implementation is low-level.

Change-Id: I6783e8f2613e168ad0c24e79e7384d5b2e4901ee
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:54 +02:00
Oswald Buddenhagen
84614cabfa add write_file() function
this dumps the contents of a variable into a file. each element of the
variable is considered a line; line terminators are added. all missing
directories are automatically created.

Change-Id: Idafeb873cea64e6705c894b3ab0ef21df69e7170
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:54 +02:00
Oswald Buddenhagen
2702f7637e add cache() function
this function adds the current contents of the named variable to the
cache. this comprises populating base_vars and appending an assignment
to .qmake.cache. if no cache file exists yet, it will be created in the
current output directory (and inherited by subdirs projects). if called
without a variable name, only create the cache file if missing.

Change-Id: I1e81c2238aa6a5817a6ebbfb022e2b995c349363
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:54 +02:00
Oswald Buddenhagen
64f475aabd add "blob" and "lines" modes to $$cat() and $$system()
this bypasses the otherwise done insane word splitting

Change-Id: Ia9b8980bc0770de3999544a06d239f55fb34f801
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:53 +02:00
Oswald Buddenhagen
c98b223567 rewrite fixPaths()
now the phonon paths are actually normalized.
just relying on File::Spec for the path relativization, so the code is
much shorter.

Change-Id: I69d6bac73e366ed0f754e1282a375871ce5559c4
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:53 +02:00
Oswald Buddenhagen
800aef3424 remove dead variable
Change-Id: Ic37c2a0da6346f044df10c7d8b5ee1a95efcc29c
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:53 +02:00
Oswald Buddenhagen
208184071e don't use abs_path on input arguments
for one, the input paths are already absolute.
second, if a path does not exists, abs_path will fail, which makes the
fallback code which tries to create them rather pointless.

Change-Id: Ie56ff09313e48e82e8bc8e8f06eca384644de464
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:53 +02:00
Oswald Buddenhagen
107aeb870b move moc, rcc and uic CONFIG additions to the respective qt modules
they don't belong into the global scope

Change-Id: I27a3de5f706392b3c4a84035521bc3b4e4055740
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:39:53 +02:00
Oswald Buddenhagen
290aae5a3a remove last traces of qbase.pri, qt_targets.pri and qt_installs.pri
qt_module_config.prf, qt_targets.prf and qt_installs.prf replace them

Change-Id: I6fc670ce8540dbd9ddaec1632d486e43a7ebf14b
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:39:52 +02:00