Don't show the mark simply because we have unicode code points
larger than 0x590.
Task-number: QTBUG-69665
Change-Id: I9af97383f3bcd52277a5288e7ad06ec240c7e51c
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Before this change, if you try to insert a row at the bottom of QSortFilterProxyModel
the row will be inserted in the source model at position proxy->rowCount rather
than at the bottom. This causes insert at apparently random positions in the source.
[ChangeLog][QtCore][QSortFilterProxyModel]
QSortFilterProxyModel::insertRows(row,count,parent) with
row == QSortFilterProxyModel::rowCount will insert at the bottom of the source model
rather than at the row QSortFilterProxyModel::rowCount of the source model
Task-number: QTBUG-58499
Task-number: QTBUG-69158
Change-Id: Ie78416c8fbc429303b8c9c98375630e3e4d85f6d
Reviewed-by: David Faure <david.faure@kdab.com>
When glGetError returns GL_CONTEXT_LOST, on XCB + Nvidia at least, the
error does not get cleared until the next successful
glGetGraphicsResetStatus.
We can't handle this properly until the start of the next frame where we
will hopefully have a valid context, but in the meantime we should avoid
locking up completely.
Change-Id: Id438d44d83b926e1f3e4281ca3704231bf1a23cf
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
qt_nameprep() already reset the string to its original length to
indicate failure, but we didn't handle that in qt_ACE_do(). So make it
have a return value whcih makes it easier to handle that case and do
handle it.
[ChangeLog][QtCore][QUrl] Fixed a bug that caused URLs whose hostnames
contained unassigned or prohibited Unicode codepoints to report
isValid() = true, despite clearing the hostname.
Change-Id: I41e7b3bced5944239f41fffd1545b7274c4b419d
Reviewed-by: David Faure <david.faure@kdab.com>
It's just adding the count of each half.
Change-Id: I9868946ceaf74002bde1fffd154b29908319007f
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Problem:
CMake Error in CMakeLists.txt:
A logical block opening on the line
.../qtbase/tests/auto/cmake/CMakeLists.txt:149 (if)
is not closed.
Broken by change 02ed1b36da
Change-Id: I6c04721edbccaa9fcdb53af92d33dfa87eeaebb8
Reviewed-by: Rolf Eike Beer <eb@emlix.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
The lower bound shouldn't be the smallest (positive) value representable
by a double, but the *lowest* (finite) value.
Task-number: QTBUG-69862
Change-Id: Ia66610e3c0f8d9643c329714607f5af573206fd8
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Otherwise there is a -Werror=narrowing error on big-endian
architectures (where htons does nothing).
Task-number: QTBUG-68390
Change-Id: Idb204a81aaedb9f4fde1d5fae406da36c7a1953e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry-picked from b206d1c808)
QMessageBox window ignores QCloseEvent if it was created
with Ok button and the detailed text was set. But it can
be closed if it contains only one button.
Make it closable if there are two buttons and one of them
is the "Show Details..." button.
[ChangeLog][QtWidgets][QMessageBox] A message box with two
buttons, one of which is the "Show Details..." button,
can be closed by clicking the X button on the window's
title bar.
Task-number: QTBUG-69526
Change-Id: Iba09e38561eb3898dc2aecfd38d8519d512a71c1
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This patch amends a62f1d0356.
If the initial backing store resize request is called with QSize(0, 0),
we end up with QXcbBackingStoreImage holding a default contructed QImage / m_qimage.
This happens because of the logic in QXcbBackingStoreImage::create(), where
if we detect that the requested segmentSize == 0, we do not allocate
any memory, and thus don't create a valid image in m_qimage. On subsequent
call to QXcbBackingStore::resize() we would only check if QXcbBackingStoreImage
object has been created, but not if it is in a valid state. This obviously
would cause problems.
This patch re-factors the logic to handle better resize to QSize(0, 0). And
make the code cleaner by:
- merging ::create and ::resize as semantically it is always resize().
- dropping unnecessary argument passing.
Task-number: QTBUG-69581
Change-Id: Ied337beb449dea8259fcf6b7d29f0a5bd553019d
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The value of 'tos' at the check might already be on the last element,
so triggering stack expansion on the second last element is too late.
Change-Id: Ib3ab2662d4d27a71effe9e988b9e172923af2908
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For some reason, the GLib event dispatcher was lowering the priority for
timers compared to other events like for example socket events.
the IDLE priority is for "Do this later when you are not busy", and that
is wrong for generic timer events.
See also https://bugs.kde.org/show_bug.cgi?id=230184
Task-number: QTBUG-48344
Change-Id: Id337a8f0c7fad3ebd5e5fa49d7831a0001ea9010
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
IBus clients cannot access the IBus socket path in Flatpak and
need to watch the D-Bus disconnection.
Change-Id: Ida1a5ce4fe112c1c4f8855ec886e74f2cbdcc8a0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
the global flags are deprecated in favor of per-library paths, but they
obviously should still work. but apparently no-one cares, because there
isn't even a bug report about it ...
amends 90eee08b3.
Change-Id: I85aee41ca11de1715d1c750ae8e663093e012fb7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When showing line and paragraph separators at an offset from the start
of the string, the end of string pointer would be incorrectly set, and
we would read past the end of the string. If any part of this memory
happened to match the line or paragraph separator, then we would
overwrite it and have a crash.
I couldn't find any reliable way to test this, since the crash depends on
the contents of the memory after the string allocated by the algorithm.
But with an overflow of 100 000 characters, I found that it crashed every
time I ran the test.
[ChangeLog][QtGui][Text] Fixed potential crash when using
QTextOption::ShowLineAndParagraphSeparators.
Task-number: QTBUG-69661
Change-Id: I17d1996b883560bacdc7ce114c8aeb2b0108faea
Reviewed-by: JiDe Zhang <zccrs@live.com>
Reviewed-by: Michal Lazo <xlazom00@gmail.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Until we can properly fix QPalette and QMacStyle,
we should disable dark appearance in Qt applications.
Disable by setting NSApp.appearance to Aqua, unless
dark mode support has been requested via Info.plist
or environment variable.
Read the NSRequiresAquaSystemAppearance Info.plist
key, don’t set NSApp.appearance if its value is false.
Also check the QT_MAC_REQUIRES_AQUA_SYSTEM_APPEARANCE
environment variable and apply similar logic. You then
enable dark mode support by setting:
QT_MAC_REQUIRES_AQUA_SYSTEM_APPEARANCE=0
which is slightly awkward, but matches Info.plist
behavior.
Task-number: QTBUG-68891
Change-Id: I86dc6cf3dee951d46c953396c57d2c31f2e4afcc
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
This change keeps the compatibility with old gradle.
It is needed for projects that must use the old gradle version.
src/tools/androiddeployqt/main.cpp was moved from qttools into
qtbase in 5.11. So re-apply c03f5673 in qttools here.
Task-number: QTBUG-69755
Change-Id: I2399d445f8208766e4185d717bb51f1317fdcc00
Reviewed-by: Volker Krause <volker.krause@kdab.com>
(cherry picked from commit e2f4193112)
Reviewed-by: Vikas Pachdha <vikas.pachdha@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
For single config mode (no debug_and_release) extra compilers wouldn't
get added to the vcxproj file.
Single config mode creates a temporary project, and that was incomplete.
Multi config mode, on the other hand, directly operates on the "real
data" and wasn't affected by this problem.
Task-number: QTBUG-69769
Change-Id: I9cd942e43d80adbeac9a3c8fbe1a5766bc9645a0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Turns out that there are two files and while a lot of distros symlink
one to the other, some distros lack the one in /etc.
[ChangeLog][QtCore][QSysInfo] Fixed QSysInfo::productType() to properly
detect some Linux distributions that ship with a minimal /etc.
Change-Id: Ia741b559c24d46c78fb2fffd1548cab414037220
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We haven't yet run the configure checks to see if statx and renameat2
are present in glibc, so this fails when we redefine the structures and
functions.
linux/stat.h:56:8: error: redefinition of 'struct statx_timestamp'
bits/statx.h:25:8: note: previous definition of 'struct statx_timestamp'
qfilesystemengine_unix.cpp:110:12: error: 'int renameat2(int, const char*, int, const char*, unsigned int)' was declared 'extern' and later 'static' [-fpermissive]
Change-Id: Ia741b559c24d46c78fb2fffd1548a792d22e3368
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Jüri Valdmann <juri.valdmann@qt.io>
Following commit 35ce6247 in IBus, IBus input plugin now connects to
session bus and use IBus portal to create input context when running
in Flatpak environment or IBUS_USE_PORTAL is set.
[ChangeLog][plugins][ibus] Support IBus portal. Qt programs in Flatpak
environment can now trigger IBus input method.
Change-Id: I561f5f873d709b8abeae554d804daa058f9f6e16
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Takao Fujiwara <takao.fujiwara1@gmail.com>
Generated C++ source files with extensions other than .cpp would not get
compiled, because the code ignored all other C++ source extensions like
.cc and .cxx.
Fix this by respecting the value of QMAKE_EXT_CPP and QMAKE_EXT_C.
Task-number: QTBUG-69770
Change-Id: I097dfef6920e353a351c97891cdbfdc9a859815f
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
If there's no background, we should copy the backingstore, so that the
backingstore is not blended with the result of the previous flush.
The unified toolbar case is covered by the window having a textured
background.
Task-number: QTBUG-69773
Change-Id: I2f4eed9f44a60ebe7495ce68cf5a54d3d2424b0c
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
According to MS sample code, MSAA requests should be replied with
UI Automation providers to enable the use the UIA-to-MSAA bridge, in
order to support MSAA-only clients. Also changing the mapping of
QAccessible::Client from UIA_CustomControlTypeId to UIA_GroupControlTypeId,
as it seems more appropriate and avoids an incorrect mapping to a push button
type in the UIA-to-MSAA conversion.
Change-Id: I5149d250da2d1bd7b14b44ca46e856a81c9be045
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
qt creator's clang code model is a bit more picky than the old one, so
we need a project that approximately works.
while we're at it, inline qmake.pri, add some missing files, and
beautify the source lists.
Change-Id: I87ca1db2ee3e55ea08e4c23f7913e882ab44fd21
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The character 'g' is only a valid format when converting numbers
to strings, but not other way round.
Change-Id: Ie772886e7a45a5067c0a3e4eaa3a6ccef8e69426
Reviewed-by: Martin Smith <martin.smith@qt.io>
Since image files easily can be (or corrupt files claim to be) huge,
it is worth checking for out of memory situations.
Change-Id: I635a3ec6852288079fdec4e14cf7e776fe59e9e0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
[ChangeLog][QtCore][QObject] Fixed a bug in setProperty() that caused a
property change not to take effect if the old value compared equal using
QVariant's equality operator, but the values were not strictly equal.
Task-number: QTBUG-69744
Change-Id: I00e04a465fcf4fc1a462fffd1547885861a07a64
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
It's stale. Thanks to Olivier B. for pointing out.
Change-Id: Ie01831ddac5446fdbdeefffd15463530818cff9e
Reviewed-by: Martin Smith <martin.smith@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
using qt$$MODULE isn't enough if the module is composed of submodules
which need the final module's headers, because that would require two
modules having the same module .pri file.
the first thought to fix this was to just use $$lower($$TARGET), but
that breaks for testlib (QtTest). while the config file name isn't
public api, it's included by a public header, so changing it is risky.
so instead stay with the original pattern, but make it explicitly
overrideable.
the cherry-pick is needed to support QtWebEngine 5.12 with Qt 5.11,
a requirement that was raised too late.
Change-Id: I758c46ed403620620d577ae16866ce751271b63e
Reviewed-by: Michal Klocek <michal.klocek@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
(cherry picked from commit 95b0e4c956)
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
* Remove () from links to QGuiApplication link names. The link targets
QGuiApplication, and the syntax Q(Gui)Application to suggest both
QGuiApplication and QApplication seems unnecessary, as QApplication
derives from QGuiApplication anyway.
* Move added in version line to the bottom of each entry that contains
said line for consistency.
* "was added in" > "has been added in"
Task-number: QTBUG-56077
Change-Id: Ife93acb7936ff9f0d3af2f2f456ad0db95419797
Reviewed-by: Nico Vertriest <nico.vertriest@qt.io>
A typo meant the color-table was not fixed. For safety fallback colors
are also made opaque.
Change-Id: I3e609882177604910c4343c86f00221a89af9078
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The fast image blending is only used for SourceOver composition, but
several of our embedded backends make heavy use of Source composition
which doesn't have a short-cut. This patch adds a blitting short cut
that works in those cases.
Task-number: QTBUG-69724
Change-Id: Icc61a67cc27bc83863153d69cae60dd986d26f69
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The rest of the RGB64 routines were optimized, but the loading of RGB32
was not as it was originally not used much, but with ARGB32 using the
RGB64 backend, it is essential for decent performance.
Task-number: QTBUG-69724
Change-Id: I1c02411ed29d3d993427afde44dfa83689d117e0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Set the Z-order to HWND_BOTTOM in that case.
Add a doc note stating that it only works for frameless or
full screen windows.
Task-number: QTBUG-53717
Change-Id: I7abf219a88aac715c51d27d925504da9e91b56f1
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Do not overwrite stdout/stderr by default, but only if requested.
This restores the behavior of QProcess::startDetached of Qt 5.9.
Task-number: QTBUG-67905
Change-Id: Idccf7b0da7bd80f88a0624286ddf2851bc974fb1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The ppm format specifies that the maximum color value field must be
less than 65536. The handler did not enforce this, leading to
potentional overflow when the value was used in 16 bits context.
Task-number: QTBUG-69449
Change-Id: Iea7a7e0f8953ec1ea8571e215687d12a9d77e11c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
