Wait for the result at the target index if the future
is running and the iterator index is past the current
result count.
Determine if there is a result at the target index
after waitForResult() returns, and return -1/end if
not.
Also support decrementing the end iterator. In this
case wait for the future to finish in order to get
the final result count.
Task-number: QTBUG-59811
Change-Id: I8fcc711bab2e72c3c5196a55b794d25e18bb324d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
... except where they are actually the component under test.
Java-style iterators are scheduled for deprecation.
Change-Id: If4399f7f74c5ffc0f7e65205e422edfa1d908ee8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use setPath() instead, as advised in the deprecation warning.
Change-Id: I2f22220885938808c8efb85720ad10f7e05801ff
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some directories that depend on QtGui were being included without the
appropriate check for qtHaveModule(gui).
Change-Id: I7c348c74464d44cbd35a027f188f8a23bb2021d9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Regular update in preparation for 5.13, adding tests for additions
since 5.9.4/5.10.1/5.11.0's update 7e946030 (the last to record its
upstream version sha1). Corrected the license header: it's now
published under MPL 2.0 (not 1.1); and our secondary licensing of it
is as LGPL3. Deferred full header over-haul until we've worked one
out in detail.
[ChangeLog][Third-Party Code] Updated DNS public suffix list
Task-number: QTBUG-72623
Change-Id: Iabdbbbfd79624830396c2a6fe0a73389bd6ce5b7
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Blacklisting did not work as blacklist should have contained osx
instead macos
Change-Id: Ifd76a38d371ccce545eb5df030aaa819b00a5b48
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
[ChangeLog][qmake] A new feature "cmdline" was added that implies
"CONFIG += console" and "CONFIG -= app_bundle".
Task-number: QTBUG-27079
Change-Id: I6e52b07c9341c904bb1424fc717057432f9360e1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Constructing a QStringRef directly from the string, offset and a
length is UB if the offset + length exceeds the string's length.
Thanks to Robert Loehning and libFuzzer for finding this.
QString::midRef (as correctly used in both changed uses of QStringRef,
since 432d3b6962) takes care of that for us. Changed one UB case and
a matching but correct case, for consistency.
In the process, deduplicate a QStringList look-up.
Added tests to exercise the code (but the one that exercises the
formerly UB case doesn't crash before the fix, so isn't very useful;
the invalid read is only outside the array it's scanning, not outside
allocated memory).
Change-Id: I7051bbbc0267dd7ec0a8f75eee2034d0b7eb75a2
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test started to fail now also for latest Windows 10 Update
Restone 2. It's unclear why the test was succeeding before, since this
seems a generic Windows API issue.
Task-number: QTBUG-64985
Task-number: QTQAINFRA-2255
Change-Id: I804f6a61c63ea70157353d1aee9027d0735073ab
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This checks that intenalHwnd in QEventDispatcherWin32::remainingTime is
initialized. If calling remaningTime, before createInternalHwnd
is called, the timeout member in the WinTimerInfo struct is not
initialized and contains a random value. This adds a check for that and
in that case returns the requested timer interval as the timer has not
yet been started. createInternalHwnd is called on the first request to
process events.
It also adds a test for checking the remaining time. But the issue can
only be seen if solely running the remainingTimeInitial test in
tst_QTimer. If running the test along side another test the other
test likely calls processEvents indirectly, which hides the issue. I
don't know if this is an issue in practice (the bug has been there
for as long a the git history goes back, 2011), but it causes the
basic_chrono test to fail if run as the only test.
Change-Id: I05c35105da778912dedf8d749aa7c953841d986e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before this the remaining time in the two tests 'remainingTime' and
'basic_chrono' had to be within the interval [100,200]. This relaxes
that to [50,200]. This test seems to be failing a lot when staging
changes in gerrit. I can reproduce some of the problem when putting a
lot of load on my system and running the tests, then remaining time is
very random.
Also removes the blacklist of remaingTime on Windows and macOS, as
basic_chrono and remaningTime tests are basically the same. The
tests also fails on Linux some times in gerrit.
I was also thinking one could:
- blacklist both tests
- remove interval requirements; just check remaining time is [0,200]
- remove the tests
Task-number: QTBUG-61013
Change-Id: I5c8f0754d059598e023fe8e5d511f4a50bb4bac2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QFile/QFileInfo::readLink() functions are obsolete but were not marked
as deprecated.
Explicit mark them as deprecated so they can be removed with Qt6.
Change-Id: I52424dc5441e1f5b01015713df990bbec5186caa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
QProcess::finished(int)/readChannelMode()/setReadChannelMode() are
obsolete but were not marked as deprecated.
Explicit mark them as deprecated so they can be removed with Qt6.
Change-Id: Iedbfd80a3c987f35caf93181e9277913a18961d9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Useful in contexts such as other QDebug operators, where the class
is already known, and the full scope of the flags is not needed.
Change-Id: I546381b1722c9c846e2412e56763563b8f625212
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Useful in contexts such as other QDebug operators, where the class
is already known, and the full scope of the enum is not needed.
Change-Id: Ibd04b1fd4f0f914c7224a007fc248d4ebabcde3e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_QString::localeAwareCompare() is failing since
ab448f731e because the 'C' locale no
longer initializes ICU and falls back to simple QString comparison.
Fix it by explicitly setting the locale for the testdata to en_US so the
QCollator is properly initialized.
Task-number: QTBUG-73116
Change-Id: I9d4d55e666c5c52f93298dedb7e22da01a25318d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 9d2923c1b0)
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
Various tests were setting the default locale and relying on cleanup()
to "restore" the C locale; which needn't actually be the locale we
started out in and, in any case, was the wrong locale for some tests.
So handle this via an RAII class that records the actual prior locale
and restores it on destruction.
Fixes: QTBUG-73116
Change-Id: If44f7cb8c6e0ce81be396ac1ea8bab7038a86729
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_QString::localeAwareCompare() is failing since
ab448f731e because the 'C' locale no
longer initializes ICU and falls back to simple QString comparison.
Fix it by explicitly setting the locale for the testdata to en_US so the
QCollator is properly initialized.
Task-number: QTBUG-73116
Change-Id: I9d4d55e666c5c52f93298dedb7e22da01a25318d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tr() recognizes %n and %Ln. it offers no way to escape lone percent
signs, which implies that they must be interpreted verbatim, which is
what the code actually does. except that it would run off the end if the
% appeared at the end of the string.
Fixes: QTBUG-57171
Done-with: Mateusz Starzycki <mstarzycki@gmail.com>
Change-Id: Icf81925c482be1ea66ec8daafb3e92ad17ea7fab
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Its filePath() and absoluteFilePath() don't trust its own
isAbsolute(), due to some infelicities on MS-Win; and kludged round a
consequent problem with resource paths; but other virtual file systems
weren't catered for. Replace the convoluted test there with a static
bool function (so that future kludges in this area shall only need to
edit one place; and can document why they're needed) and use a more
robust test that handles all virtual file systems (by asking
QFileInfo) but falls back to QFileSystemEntry to work round the known
infelicities on MS-Win. Add regression test for asset library paths
issue on iOS. Ammends 27f1f84c1c.
Moved a couple of local variables to after the early return, since it
doesn't need them, in the process.
Task-number: QTBUG-70237
Change-Id: Ib3954826df40ccf816beebe5c3751497e3bf6433
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
qtbase/src/corelib/kernel/qmetatype.cpp: In static member function ‘static void QMetaType::destroy(int, void*)’:
qtbase/src/corelib/kernel/qmetatype.cpp:2599:27: error: ‘info.QMetaType::m_destructor’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (m_typedDestructor && !m_destructor)
~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~
qtbase/src/corelib/kernel/qmetatype.cpp:1868:15: note: ‘info.QMetaType::m_destructor’ was declared here
QMetaType info(type);
^~~~
qtbase/src/corelib/kernel/qmetatype.cpp:2600:26: error: ‘info.QMetaType::m_typedDestructor’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
m_typedDestructor(m_typeId, data);
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~
qtbase/src/corelib/kernel/qmetatype.cpp:1868:15: note: ‘info.QMetaType::m_typedDestructor’ was declared here
QMetaType info(type);
^~~~
The extended (not inlined) function may be called on a half
initialized invalid instance.
Change-Id: I26d677a8ad2bd0c5846233f06393e774d377936d
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Also blacklist tst_QRawFont::unsupportedWritingSystem() and
tst_QGlyphRun::mixedScripts() on windows for now.
Conflicts:
qmake/generators/makefile.cpp
src/corelib/itemmodels/qstringlistmodel.cpp
src/platformsupport/fontdatabases/windows/qwindowsfontengine_p.h
tests/auto/corelib/itemmodels/qstringlistmodel/tst_qstringlistmodel.cpp
tests/auto/gui/text/qglyphrun/BLACKLIST
tests/auto/gui/text/qrawfont/BLACKLIST
Task-number: QTBUG-72836
Change-Id: I10fea1493f0ae1a5708e1e48d0a4d7d6b76258b9
QStringListModel::setData documentation states that
"The dataChanged() signal is emitted if the item is changed."
This patch actually respects the doc. setData will check that the data
actually changed before sending the dataChanged signal.
[ChangeLog][QtCore][QStringListModel] setData will now emit the
dataChanged() signal only if the string set is different from
the one already contained in the model
Change-Id: I4308a6f3b4851203fb899c5e29a36076e0c32f2f
Reviewed-by: David Faure <david.faure@kdab.com>
The current implementation of wildcardToRegularExpression doesn't
anchor the pattern which makes it not narrow enough for globbing
patterns. This patch fixes that by applying anchoredPattern before
returning the wildcard pattern.
[ChangeLog][QtCore][QRegularExpression] The wildcardToRegularExpression
method now returns a properly anchored pattern.
Change-Id: I7bee73389d408cf42499652e4fb854517a8125b5
Fixes: QTBUG-72539
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Firefox, Chrome and various http libraries normalize /./ and /../ from
urls, but retain multiple adjacent slashes as is. Qt removes
duplicated slashes which makes it impossible to access some web
resources that rely on those.
Fixes: QTBUG-71973
Change-Id: Ie18ae6ad3264acb252fcd87a754726a8c546e5ec
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously, the C locale was treated as English because each back-end
takes the locale's bcp47Name(), which maps C to en. However, the C
locale has its own rules; which QString helpfully implements; so we
can delegate to it in this case. Extended this to sort keys, where
possible. Clean up existing implementations in the process.
Extended tst_QCollator::compare() with some cases to check this. That
required wrapping the test's calls to collator.compare() in a sign
canonicalizer, since it can return any -ve for < or +ve for >, not
just -1 and +1 for these cases (and it'd be rash to hard-code specific
negative and positive values, as they may vary between backends).
[ChangeLog][QtCore][QCollator] Added support for collation in the C
locale, albeit this is only well-defined for ASCII. Collation sort
keys remain unsupported on Darwin.
Fixes: QTBUG-58621
Change-Id: I327010d90f09bd1b1816f5590cb124e3d423e61d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
All types that can be trivially copied and destructed are by definition
relocatable, and we should apply those semantics when moving them in
memory.
Types that are trivial, are by definition not complex and should be
treated as such.
[ChangeLog][QtCore] Qt Containers and meta type system now use C++11
type traits (std::is_trivial, std::is_trivially_copyable and
std::is_trivially_destructible) to detect the class of a type not
explicitly set by Q_DECLARE_TYPEINFO. (Q_DECLARE_TYPEINFO is still
needed for QList.)
Done-with: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Change-Id: Iebb87ece425ea919e86169d06cd509c54a074282
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QUrlQuery] QUrlQuery now provides an
initializer list constructor. It can be created using a list of
key/value pairs.
Fixes: QTBUG-68645
Change-Id: Ief5939aa477718f6dd3580f2c60f95ff3aa892ae
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix clang-tidy warnings:
- Use range-based for and streamline some code
- Use nullptr
Change-Id: Iad43490d0e968baa76d54d3bf81558a48b19cdbd
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
That's an undocumented Qt 4/3/2 remnant, start remove usages.
Fix incorrect include header in qclass_lib_map.h as a drive-by.
Change-Id: I939be2621bc03e5c75f7e3f152546d3af6d37b91
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix deprecation warnings - replace qFindChild/Children() with
QObject::findChild/Children() and replace some 0 with nullptr.
Change-Id: If2f01d12fa91d09d98a61f73b0449a6773ac93db
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We'll be adding calendar code here as well, and tools/ was getting
rather crowded, so it looks like time to move out a reasonably
coherent sub-bundle of it all.
Change-Id: I7e8030f38c31aa307f519dd918a43fc44baa6aa1
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It's perhaps best to ensure that functions we are deprecating shall no
longer be used in tests. Also, fix the "0 as nullptr" warnings.
Change-Id: I2f22c9b9482e80fa120bcd728ec269198a36678f
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
We have a problem. Our types don't play well with the std unordered
containers, because they do not specialize std::hash. We therefore
force our users to come up with an implementation, hindering
interoperability, since any two developers are unlikely to come up
with compatible implementations. So combining libraries written by
different developers will result in ODR violations.
Now that we depend on C++11, and thus the presence of std::hash, we
still face the problem that the standard does not provide us with a
means to compose new hash functions out of old ones. In particular, we
cannot, yet, depend on C++17's std::hash<std::string_view> to
implement std::hash<QByteArray>, say. There's also no std::hash for
std::tuple, which would allow easy composition by using std::tie().
So piggy-back on the work we have done over the years on qHash()
functions, and implement the std::hash specializations for Qt types
using the existing qHash() functions, with a twist: The standard
allows implementations to provide means against predictable hash
values. Qt has this, too, but the seed is managed by the container and
passed to the qHash() function as a separate argument. The standard
does not have this explicit seed, so any protection must be implicit
in the normal use of std::hash.
To reap whatever protection that std library has on offer, if any, we
calculate a seed value by hashing int(0). This will be subject to
constant folding if there's no actual seed, but will produce a value
dependent on the seed if there is one.
Add some tests.
A question that remains is how to document the specialization. Can we
have a \stdhashable QDoc macro that does everything for us?
Task-number: QTBUG-33428
Change-Id: Idfe775f1661f8489587353c4b148d76611ac76f3
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
You cannot manipulate variables in custom target dependencies, so the
following code was invalid:
i386_d.depends = EXPORT_VALID_ARCHS=i386
In order to still build the fat binary, we split the project in four,
one for each architecture, plus one to create the final package.
Change-Id: If08cf54e2e4098a7e10df41b7ea8d2bf699f58be
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Some tests were fixed and others were skipped/blacklisted.
Task-number: QTBUG-63152
Change-Id: Ica7df555f8d152ee589865911130525101d4b941
Reviewed-by: Liang Qi <liang.qi@qt.io>
Fixed a misguided condition in the check for bogus texts in the sscanf
branch of the decoder; it checked for 'e' but neglected 'E', which is
just as valid.
Change-Id: I9236c76faea000c92df641930e401bce445e06c8
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Revised some toFloat()s to be consistent with the matching
toDouble()s; previously, they would return infinity if toDouble() did
but return 0 if toDouble() got a finite value outside float's range.
That also applied to values that underflowed float's range, succeeding
and returning 0 as long as they were within double's range but failing
if toDouble() underflowed. Now float-underflow also fails. Amended
their documentation to reflect this more consistent reality.
Added some tests of out-of-range values, infinities and NaNs.
[ChangeLog][QtCore][toFloat] QString, QByteArray and QLocale returned
an infinity on double-overflow (since 5.7) but returned 0 on a finite
double outside float's range, while setting ok to false; this was at
odds with their documented behavior of returning 0 on any failure.
They also succeeded, returning zero, on underflow of float's range,
unless double underflowed, where they failed. Changed the handling of
values outside float's range to match that of values outside double's
range: fail, returning an infinity on overflow or zero on underflow.
The documentation now reflects the revised behavior, which matches
toDouble().
Change-Id: Ia168bcacf7def0df924840d45d8edc5f850449d6
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
They actually return infinity if conversion overflows, while still
setting ok to false; they were documented to return 0 on failure, with
no mention of this special handling of overflow. Documented reality
rather than changing the behavior. Gave underflow as an example of
failure other than overflow (toDouble()s do indeed fail on it).
Added some tests of out-of-range values, infinities and NaNs.
[ChangeLog][QtCore][toDouble] QString, QByteArray and QLocale return
an infinity on overflow (since 5.7), while setting ok to false; this
was at odds with their documented behavior of returning 0 on failure.
The documentation now reflects the actual behavior.
Fixes: QTBUG-71256
Change-Id: I8d7e80ba1f06091cf0f1480c341553381103703b
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
A couple of QLocale tests were using setlocale twice to provide a
transient locale tweak in tests; however, if the test in between
fails, that can leave the program running in the "transient" locale
after. So implement a proper class whose destructor ensures the
transient is tidied away. Also change the locale in use by one of
these transient changes: it purported to be checking things didn't
depend on locale, but was using the same local as most of the
test-cases for its test.
Change-Id: I0d954edcc96019a8c2eb12b7a7c568e8b87a41d5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Use 'msvc' instead of 'win32-msvc' or even 'win32-mscv*'.
Change-Id: I21dc7748a4019119066aea0a88a29a61827f9429
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This test was taking so much time that it regularly timed out on WinRT
and when running in qemu. Reduce it from around 40 to 7 seconds on a
powerful desktop.
Now it either runs for two full seconds for each test function or until
it has done 50 iterations.
Fixes: QTBUG-71405
Change-Id: If752c1e65d3b19009b883f64edc96d020df479d1
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QFile::map() is documented to continue working after the QFile is
closed, so this should work for the resource file engine too.
Change-Id: I343f2beed55440a7ac0bfffd1563243a3966441f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We were returning a pointer to the compressed data and comparing to the
compressed data size.
Change-Id: I343f2beed55440a7ac0bfffd1563232d557c9427
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: hjk <hjk@qt.io>
Instead of using a QString with only the prefix, let's do a full
comparison to make sure there's no junk at the end of the file.
Take the opportunity to remove the nonsense of a space at the end of
most of these files (I didn't remove from all).
Change-Id: I343f2beed55440a7ac0bfffd15632228c1bfe78f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Both use same source, but link without and with Qt Gui library.
Task-number: QTBUG-71751
Change-Id: I5643a07a8067f5fc10fc66f717f19bc3e16a33ab
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test has been failing over and over since it was removed from the
blacklist. Obviously it is not stable.
This is a partial revert of commit
b10ee45546.
Task-number: QTBUG-71773
Change-Id: Ie2588538ee704652c2f09ce6ad947da3011e7dad
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test needs to also unregister its timers when it fails. Therefore,
wrap the registering and unregistering in an RAII class.
Task-number: QTBUG-71773
Change-Id: I6ef44e580880deecb32763b5b0cd71e1c26929be
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Including 4f7ad5ec44
to make appimage not ambiguous
Change-Id: I8db13fc785b267c09667ef38430bf98135c7f0d6
Reviewed-by: David Faure <david.faure@kdab.com>
The unit tests weren't running into this problem because the every
setDevice() was preceded by the object being initialized with the exact
same data, so there was never a previous error state. I've only changed
a couple of tests, left the other setDevice() unchanged so we test both
behaviors.
Fixes: QTBUG-71426
Change-Id: I1bd327aeaf73421a8ec5fffd1561a590e3933376
Reviewed-by: Nils Jeisecke <nils.jeisecke@saltation.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This avoids memory allocation and data copying in e.g.
QObject::property().
Detected by heaptrack's "Temporary allocations" counter in an
application using the breeze widget style (many animations).
Change-Id: Iabdb58a3e504cb121cce906ef707b0722de89df6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Implemented a new proxy model to transpose the source model.
Rows will become columns and vice-versa.
Both flat and tree models supported.
[ChangeLog][QtCore] New class QTransposeProxyModel to
swap rows and columns of the source model.
Change-Id: I902963c6b81aa0f63b5ad2bddca538f28b565084
Reviewed-by: David Faure <david.faure@kdab.com>
Replace BackgroundColorRole/TextColorRole with
BackgroundRole/ForegroundRole and explicit deprecate them for 5.13
Change-Id: I6b0d99844a32d2f5fdfd1878317a7b7422b800d3
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When QMimeProvider parses the shared mime database xml files,
it will read the <comment> element for mime comment and treat the
`xml:lang` attribute as locale language string. When no `xml:lang`
attr is provided, QMimeProvider will read the value and treat it as
a en_US locale string as the default key.
When we call QMimeType::comment(), it will try to get the locale
comment string with the default language (QLocale().name()), once
it can't find a matched result, it should return the default key
(which QMimeProvider set it as en_US locale before) as fallback.
Task-number: QTBUG-71314
Change-Id: I444f8159d6f19dfef6338cd79312f608d8f13394
Reviewed-by: David Faure <david.faure@kdab.com>
Follow the pattern of char and float, and treat shorts as a more generic
type in QVariant::canConvert()
Task-number: QTBUG-60914
Change-Id: Ib1cc7941ee47cb0fc0098f22f98a03cd6f6b63fe
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Added operator[] to QCborValueRef and mutating operator[] both there
and in QCborValue. If the value (referenced) is not a container, it
is replaced with a map and a reference into the result is returned.
If the value is an array and the key is a string, negative, or more
than 0xffff, the array is first converted to a map.
Change-Id: Ibbc9e480fb25eb3d05547c8a1b99e762b2a68b68
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The bitmap cache for the first 64 signals being connected was only set when the
connection is added. It was never unset when the connection was removed.
Internal use of the connectedSignals bitmap is not hurt by it occasionally
saying a signal is connected even though it is not, since the purpose of those
checks is avoiding expensive operations that are not necessary if nothing is
connected to the signal.
However, the public API using this cache meant that it also never spotted
signals being disconnected. This was not documented. Fix the behavior by only
using the cache if it is up to date. If it is not, use a slower path that gives
the correct answer.
To avoid making disconnections and QObject destructions slower, the cache is
only updated to unset disconnected signals when new signal connections are
added. No extra work is done in the common case where signals are only
removed in the end of the QObject's lifetime.
Fixes: QTBUG-32340
Change-Id: Ieb6e498060157153cec60d9c8f1c33056993fda1
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Spaceship operator was disabled for QCborValue, but not the test.
Change-Id: Icb91da689f62ef6de9f4fa926346505c5e50e9eb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
PCRE2 does not support JIT on winrt. This test row takes a long time
(30 seconds here) without JIT and thus might cause test timeouts in
COIN when run on winrt.
Change-Id: I79d9f6be16dbe16594ae2bf51f353acd06b3d2fe
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This way there is only one for loop, which is more optimizer friendly
Change-Id: Iaa02026627d5259c3eea1ff5664e8f22664eef73
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since Qt 5.10, qTo/FromBig/LittleEndian<float/double> stopped working.
It may be confusing, but big endian floats do exist, so not to break old
code, we should support them.
Change-Id: I21cdbc7f48ec030ce3d82f1cd1aad212f0fe5dd0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the test is stable in Qt 5.12.
Task-number: QTBUG-60993
Change-Id: I0c366567121688d9518e90b5e8f9ec1b4006b7b9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
on macOS, where it was skipped but where it now seems to be stable/work.
Task-number: QTBUG-39983
Change-Id: I100a57f23b43074ebacc012be247d92acc6ae336
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
POSIX specifies that tzset() consults environment variable TZ and
modifies some globals; it also specifies mktime(), localtime() and
strftime() to behave as if they called tzset(). Fortunately, we only
call strftime() from a test and only call localtime() when not
threaded. Provide wrappers for tzset() and mktime() that share the
lock used by our environment-access code, to prevent races on the
environment (and tzset()'s globals) when we call them.
In the process, re-use tst_QDateTime's TimeZoneRollback in its older
test systemTimeZoneChange() and presume that this can now be tested
cross-platform, since TimeZoneRollback is used in another test where
this works.
Fixes: QTBUG-71030
Change-Id: I79f559b8857ea2803e73501008bf0d7158c6731f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test triggered a compiler warning for good reason, it made no
sense, trying to change it to what it was probably meant to be.
Change-Id: I01a848272b42dae2aaa58a4f5bed998644d864da
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QImage's operator>>(QDataStream&) did not set an error mode on the
stream on read failures. That would break QDataStream transactions.
Since the current QImage serialization cannot differentiate between
truncated and corrupted data, we set the ReadPastEnd error as expected
by the transaction system.
Also specify the expected file format on decoding QImage from stream,
to avoid all the format handlers' canRead() being invoked. This is
necessary since some of them may call ungetChar(), which fails when
the stream is in a transaction.
Also add testing of this feature to the QDataStram transaction
autotest. That required a slight rewrite of the fake sequential
QIODevice subclass. The previous implementation had incorrect
behavior of peek(), which is required by QImage decoders.
Task-number: QTBUG-70875
Change-Id: If3f1ca7186ad1e6ca0e6e8ea81d2b2fbece6ea01
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use a template on the size of the char[], as suggested by Ville
Voutilainen. This resolves ambiguity about whether such look-ups
should be done via QString or QCborValue (not that it would have made
any difference).
When we come to add mutating indexing of QCborValue, chained
dereferences like map[i][j][k] need to stay in operator[] const
throughout, to avoid detaching intermediates to create references into
them due to using the mutating operator[] on the earlier dereference's
return. So const-qualify the QCborValue operator[] const variants at
the same time, to match those of QCborValue itself.
Change-Id: Ib1652ae9440fe3767a653afa2856b74040210e07
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Theoretically, it could improve the speed. Some of the modified lines
also make the style homogeneous.
Change-Id: Iaed7b16fa75e485be0f825220c366903525448ce
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a regression from commit 346c15102b, which creates a new QRegExp
in setFilterRegExp, losing previously set case sensitivity property
(i.e. when the code does proxy->setFilterCaseSensitivity(Qt::CaseInsensitive)
before setFilterRegExp).
Interestingly that commit ensured that setFilterFixedString would still
preserve CaseSensitivity, but not setFilterRegExp(QString).
Change-Id: I3d37d001ce6e86dd90e7e07431440a42607172f9
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
When a time-zone does a spring-forward, skipping an hour (either to
start DST or to move its standard time), there's an hour that doesn't
exist on the day in question. That hour can be the first hour of the
day, in which case using 0:0 as the default time is broken. So catch
this case and use the first time that day that makes sense.
Fixes: QTBUG-70823
Change-Id: I23dae9320a3cdd2c988841a7db1b111edb945730
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There is not reason why it should be kept in secret. Not having public
accessor forces a user code to keep a copy of the id. Visible for
example in QML (QQmlValueType).
Change-Id: If0de65fb8d91bcd50880c66b5f87c68f6d888dd3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Move the creation of the symbolic link/junction from the _data() slot
into the actual test function. The parameters are passed by a newly
introduced struct. This ensures only the symbolic links/junctions that
are actually needed are created. It can then no longer happen that
filtering for one data row invokes recursive deletion of the mountpoint
junction.
Also use of the newly introduced convenience createSymbolicLink()
in canonicalFilePath()
Task-number: QTBUG-63989
Change-Id: Ia78fd4ad6097136934ab5a375f4c352713d0f115
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
QUrl::RemoveAuthority is RemoveUserInfo | RemovePort | 0x10, so the
condition
if (options & QUrl::RemoveAuthority)
would match if any of the other bits for the username, password or port
were set, which meant we would skip the host comparison. Ditto for
username and RemovePassword.
[ChangeLog][QtCore][QUrl] Fixed a bug that caused QUrl::matches to
incorrectly compare two URLs with different hostnames or different
usernames as equal, if certain QUrl::RemoveXxx options were passed.
Change-Id: I015970a03b874898bba7fffd155856ab9d6cb1be
Fixes: QTBUG-70774
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Before this change we inserted newline only if an option has a
description and ended up with an arbitrary long line with all options.
[ChangeLog][QtCore][QCommandLineParser] Fixed a bug that caused the help
output to show two options or more in the same line if the options didn't
have a description.
Task-number: QTBUG-70174
Change-Id: Id54b9ae13ee596869e4dc14e09301aea19eed2f8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: If030b56ad97e047d89d442629262b4839df306d4
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Replacing the qmake test with the one corelib/thread/thread.pri uses
for those classes.
Change-Id: Ie803190b821736c89b056ae51b7dfe92046189eb
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
We were handling this properly, but not testing them. I guess we weren't
testing because the condition is a valid intermediate state, so
hasFailure() is correct it returning false.
Testing inspired by the bug reported in
https://github.com/intel/tinycbor/issues/137
Change-Id: Ib47c56818178458a88b4fffd1554ecfdd0af637e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is already blacklisted for macOS 10.12 and reproducing in 10.13.
Task-number: QTBUG-61037
Change-Id: I464e42d0ae5ab24104250edc69a90454ba605eaa
Reviewed-by: Liang Qi <liang.qi@qt.io>
The test was computing GMT with a suffix added to it for the offset;
but when the offset is zero there's no need for it. Cleaned up the
logic so that it only checks for a "padded to two digits with zero" if
the number is single-digit (and use string arithmetic in preference to
wantonly complex .arg()ing; and use simpler names). Since we don't
try to check anything unless GMT does appear in the string (because
the actual zone ID was used, instead of GMT with an offset), the case
of zero offset has nothing more to check than that GMT was present,
the precondition for checking anything.
Task-number: QTBUG-70322
Change-Id: I0b8abe7e63d9d72fa9cf32f188b47a78a849044b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's not thread-safe so should only be used within systemData()'s
locked code. This eliminates the last callers of it by making it a
local function of the compilation unit, exposing a method from
QSystemLocale() to get round its use of private parts. Make the
constructor for QSystemLocale only stomp its _systemLocale global if
previously unset, but let instantiation still clear
globalLocaleData.m_language_id, so that it can be used as a way to
trigger an update to system locale data.
Change-Id: I908dca9fd30bbf20f42321ab8f9094f2fa37b7b0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On platforms where char is signed, like x86, the following is an error
(narrowing conversion):
unsigned char x[] = { '\xc3' };
Change-Id: I495bc19409f348069f5bfffd15518f9ef4e43faf
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It takes multiple source models and concatenates their rows into a single model.
With full unit tests.
[ChangeLog][QtCore] New class QConcatenateTablesProxyModel, to
concatenate the rows from multiple source models.
Change-Id: Iaf4f325473adef106f423677fdc5ee0e35e87d35
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Before this patch QStringListModel::setItemData emitted dataChanged
twice if the roles map contained both DisplayRole and EditRole.
This fixes the duplication.
Increased efficiency of QStringListModel::itemData
Task-number: QTBUG-67511
Change-Id: Ibaea17530f15627a3cb8003e5284e54001731ded
Reviewed-by: David Faure <david.faure@kdab.com>
Implemented the virtual method moveRows to allow row movement.
[ChangeLog][QtWidgets][QListWidget] Implemented moveRows in model
Task-number: QTBUG-69807
Change-Id: I212b560b8778306a0315d9d5e4710efcc7dbbe44
Reviewed-by: David Faure <david.faure@kdab.com>
This new test double-checks the bugfix for QSortFilterProxyModel::insertRows
in commit 70ba75519d. Previously, when using QComboBox on top of
QSortFilterProxyModel and calling QComboBox::addItem with row==rowCount(),
an empty item was inserted in one place, and then another item was modified
(instead of the inserted empty one). This test checks that the above bugfix
indeed fixes the behavior of QComboBox::addItem when used in this manner.
Task-number: QTBUG-69158
Change-Id: Id01345e0525694a57250c656222d626e2267aa8e
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: David Faure <david.faure@kdab.com>
There was a QStringView::compare(QString, CaseSensitivity) but it's
good that the symmetric also exists
Change-Id: Ic789f11d41eb8cfa393cb51c19bd1f89bb87d912
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some people suggested the later, so let's have a second look at it
before it's too late.
Although I was in favor of the former I'm now having second thoughts.
connectTo() is meant to only be used in classes which have a clear dominant signal,
but there are rare classes that have two (example: QAbstractButton::toggled, QAbstractButton::clicked).
QAbstractButton::connectTo() would be ambiguous if we ever wanted to add these shorthand connects
to QtWidgets
Change-Id: I198ad3326d31dcf89b9c47a299124572ee7b11b3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
...not just the debug flag. The information is saved outside of the CBOR
map for two reasons:
1) removing the hack that depended on how QCborStreamWriter and
TinyCBOR internally work, allowing for the extra parameter to be
written directly. We wouldn't be able to use that hack anyway and would
have needed a further, uglier hack to encode a byte whose value we
don't know.
2) outside the map, this information can be parsed more quickly and
then we can discard any plugins we shouldn't actually load.
Since we're doing this for a flag, I decided to move the Qt version
there too for reason #2.
Change-Id: I61ecce6b1324410bbab4fffd153d4e5fc696d19e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
In preparation for Qt 6 deprecating the binary JSON format. Also reduces
the size of the metadata a little: for the xcb platform plugin, it went
down from 264 bytes to 138; for the jpeg image plugin, it went from 320
to 135.
I've had to change the signature so older versions of Qt won't try to
parse the CBOR data as Binary JSON. Unfortunately, before QJsonDocument
could get a chance to reject it, qJsonFromRawLibraryMetaData() needed to
allocate memory and that causes crashes with Qt < 5.11.2.
Change-Id: Ieb48f7c0dd0e4e0fb35efffd153bee34e16ce347
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We no longer support macOS 10.11, iOS/tvOS 10, or watchOS 3.
Change-Id: Ide03d8fac06185ef4162ba75ee54a0adf6916905
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Synced QMetaObjectBuilder::MetaObjectFlag with the MetaObjectFlags enum
from qmetaobject_p.h. Also added a few comments for Qt 6.
Change-Id: Ieccd5cf8d512a6bf7256b2f4db88d45662774536
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This feature is needed to register complex types (e.g. Q_GADGETS) at
runtime, using a single constructor method and added type parameter.
Without having the type id available to the Constructor it is impossible
to specialize behavior, thus requiring separate constructors for each
type. Generating these separate constructors at compile time is easy,
but not at runtime.
[ChangeLog][QMetaType] QMetaType can now register constructor for a set
of dynamic types.
Change-Id: I6071271d0e157864594dd07b4bc3a0abbeb15a44
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the test uses CoreFoundation api directly, so it must link it
explicitly.
amends 6c8f32388b.
Change-Id: I76b7d8ab41d6a66138eb45bd0f067cfee8e96cb8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The previous implementation wrongly calculated the necessary data type
to hold the offset indexes. It looked at the amount of elements,
but instead we should look at value for the last element in the offset
array
Change-Id: I84c6985dc3c329df3bbc5a14f9789170877b65bb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We were missing a few languages CLDR knew about; so add them to the
list in enumdata.py (and add trailing commas to lists to make future
additions not need to change the prior last line; python is perfectly
happy with this).
[ChangeLog][QtCore][QLocale] Added support for Western Balochi, Ido,
Lojban, Sicilian and Souther Kurdish.
Change-Id: I0d24cff46a0ae8db48ec1db8762088f877319982
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
This function allows to generate an array of offsets of substrings in
a string at compile time. This produces less verbose and easier to maintain
source code.
Change-Id: I5774b8b91906f6191f2b1244a676c07e7eb15b47
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The table and macros weren't extensible enough for non-Latin-based
languages.
Change-Id: I950f06de57aaf6bd0b24e0056e4acee2fb655f3d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We have #if-ery on Q_OS_DARWIN controlling an expectation of gettign
"GMT+1" and "GMT+2" instead of "CET" and "CEST" in two tests; this
turns out to not be a deficiency of macOS so much as of how we
configure Coin's VMs. While we fix that, we need to ignore failures
in these tests, so that we can pull the #if-ery out and clear the
blacklist once the VMs are set up properly.
Task-number: QTBUG-70149
Change-Id: If3577200cf980b3329161ab3eea7bd2e9d0124e0
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This reverts commit fd38c97a6c.
Apparently our actual VMs for 10.13 don't get this right, although the
ones used in testing did (prompting the fix this reverts). We
probably have mis-configured VMs, but this is the quick-fix to get
development moving again.
Task-number: QTBUG-70149
Change-Id: Ib96755d8e21d9b226e22fc985f13f34fa04117b1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
CLDR up to somewhere between v29 (used by 5.9) and v31.0.1 (used by
5.10 and later) claimed Costa Ricans don't include fractions in their
currency; now it claims they expec two digits. Apparently one of them
does expect those digits, so this is the regression test I'll be
cherry-picking back to LTS, to accompany the CLDR updates they need.
Task-number: QTBUG-70093
Change-Id: I138772cc6013fa74de4f7c54b836cac83421eab2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Implemented the virtual method moveRows to allow row movement
[ChangeLog][QtCore][QStringListModel] Implemented moveRows
Task-number: QTBUG-69807
Change-Id: I518f48a321bd755ab56f2fe84883d27324cc42ec
Reviewed-by: David Faure <david.faure@kdab.com>
_q_interpolate<T> subtracts 2 arguments of type T,
for unsigned types this can cause wrapping around
Task-number: QTBUG-57925
Change-Id: Iffa59f413579a3d5de8cb728fe71443d8e8a04aa
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
We want to store the metadata size and get it from the plugin in Qt 6.
Change-Id: Ieb48f7c0dd0e4e0fb35efffd153bebc2914d9a3c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
After updating MinGW toolchain from 5.3.0 to 7.30 test starts to fail.
Task-number: QTBUG-69947
Change-Id: I850d854b27e1cb4e1dd2cb600e8e79bd18bff4a0
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Simo Fält <simo.falt@qt.io>
They have been blacklisted on windows and macOS previously. Now failing
on WinRT as well.
Task-number: QTBUG-69962
Change-Id: I30ca23005b082e820ee896fa36a8984a1536ad6b
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Assume two MIME types A and B are registered, both with the same glob
pattern, A being parent of B, A with some magic rule, and B with another
magic rule. Given a file that matches the glob pattern and the magic rule
of A, the resulting MIME type depended on the order of registration of A
and B, because it would just check if some glob matching MIME type was
also a subclass of the magic matching MIME type.
The patch prefers the the MIME type that matches by magic if that
matches by glob pattern as well (i.e. A in our example).
The "recommended checking order" of the spec does handle that case.
Task-number: QTBUG-44846
Change-Id: I2af43f6199faf9a42cd9c35d3a045441afbd6217
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
This patch implements the support for QRegularExpression in
QSortFilterProxyModel.
[ChangeLog][QtCore][QSFPM] QSortFilterProxyModel now supports
QRegularExpression.
Task-number: QTBUG-46810
Change-Id: If932d55f98f9b8bcf3a72c03ffd51da52cb50ad1
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: David Faure <david.faure@kdab.com>
The match method still uses QRegExp. This patch updates the code to use
QRegularExpression and translates the wildcard patterns to a suitable
form for QRegularExpression.
[ChangeLog][Core][QDir] QDir now uses QRegularExpression internally for
wildcard matching. Note that QRegularExpression might not give the
exact same result as QRegExp as its implementation follows strictly the
glob patterns definition for wildcard expressions. Nevertheless, the
tests for QDir return the same results as before.
Change-Id: I095959443ac7362f7534e35454eff038061fca82
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
This patch refactors the wildcardToRegularExpression method to generate
a simpler regular expression. It also fixes some shortcomings of the
previous implementation.
Tests have been updated to ensure all cases are properly supported.
Change-Id: I454e3fe8fe0bb663b2f319d6fa2fa8aec626c50d
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Deep down in CoreFoundation, ICU is used, and this test triggers a
heap-buffer-overflow with AddressSanitizer. Disable this test for macOS
until Apple fixes it.
Task-number: QTBUG-69875
Change-Id: I43e4a69708be8cde3bde87c57db21f5b717f96b8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Before this change, if you try to insert a row at the bottom of QSortFilterProxyModel
the row will be inserted in the source model at position proxy->rowCount rather
than at the bottom. This causes insert at apparently random positions in the source.
[ChangeLog][QtCore][QSortFilterProxyModel]
QSortFilterProxyModel::insertRows(row,count,parent) with
row == QSortFilterProxyModel::rowCount will insert at the bottom of the source model
rather than at the row QSortFilterProxyModel::rowCount of the source model
Task-number: QTBUG-58499
Task-number: QTBUG-69158
Change-Id: Ie78416c8fbc429303b8c9c98375630e3e4d85f6d
Reviewed-by: David Faure <david.faure@kdab.com>
Add it to configure.json and replace all occurrences of QT_NO_THREAD
with QT_CONFIG(thread). Add conditions for other features that depend
on thread support. Remove conditions where we can use the QMutex and
QThreadStorage stubs.
Change-Id: I284e5d794fda9a4c6f4a1ab29e55aa686272a0eb
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
qt_nameprep() already reset the string to its original length to
indicate failure, but we didn't handle that in qt_ACE_do(). So make it
have a return value whcih makes it easier to handle that case and do
handle it.
[ChangeLog][QtCore][QUrl] Fixed a bug that caused URLs whose hostnames
contained unassigned or prohibited Unicode codepoints to report
isValid() = true, despite clearing the hostname.
Change-Id: I41e7b3bced5944239f41fffd1545b7274c4b419d
Reviewed-by: David Faure <david.faure@kdab.com>
The API originally proposed was flawed in the sense that the setter
function would use a modified version of the parameter given which would
have make it a black box for the user. This patch fixes that by removing
that setter and providing a static method that will return the pattern
suitably modified to be used by QRegularExpression the same way the
escape method does.
[ChangeLog][Core][QRegularExpression] Implemented support for wildcard
patterns through a static method.
Change-Id: I0054bcaffd7525dac569f54fa81f73b7e4544b2e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_QtEndian's transformRegion_template() was getting a
signed/unsigned comparison warning when T was unsigned in a
QCOMPARE(T-value, 0); so use T(0) instead.
Change-Id: I78cb2ab96f79393def65ed2c020aa3039017ab92
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
That way, we'll get told all the cases that fail, rather than only the
first. Provoked by investigation of failures that turned out to be
caused by QTBUG-69875.
Change-Id: I8fa2902cbbcb307cbe1fdec2e7d8d6b0c3eb998a
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
The CLDR data contains eight locales with numeric territory codes, 001
for World, 150 for Europe and 419 for Latin America. The last was
already known in our enumdata.py, but as "Latin America and The
Caribbean", which is not supported by the CLDR, so I've amended it
while adding the other two. This gives us support for Esperanto and
Yiddish (among others).
[ChangeLog][QtCore][QLocale] Added support for World and Europe as
(numeric) "country" codes ("territory" in CLDR terms), thereby
enabling support for Yiddish and Esperanto, among other locales using
such codes.
Task-number: QTBUG-57802
Change-Id: Ibb1180fb720743a3a0589527649d10f3c9cd123d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These tests kludge round Apple's use of GMT+1 and GMT+2 as names for
CET and CEST on Darwin; but 10.13 actually gets the names right, so
side-step out of the kludge when on this version or later.
Change-Id: Icb8a2f3ac30f0f621a19042dc03e0d281782dd41
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
They have a separate type that we can't recognize directly, but we
can check if we can recognize the QFlags<T> form, though we have to
add a lot of template-conditions to avoid triggering QFlags static
asserts.
Change-Id: I00853682c5376dd3cc411ff151f47bce2389e277
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Adds an enumName to QMetaEnum to carry the name of the enum since for
flags that doesn't match the name of the Qt type, but is needed if the
flag is scoped.
Change-Id: I1c0f77eb9e40e6fd1eb6a59bea77caf0f33fcf43
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
