Windows CE does not have support for GetGlyphOutline.
So addGlyphToPath will not work. QML uses it for their
distance field rendering. One option to bypass this issue
is to use freetype as rendering backend.
Change-Id: I965254344945cbdad771a5d505fb61c1cc2087df
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
qurl.cpp was removed from the Makefiles on 6ab6b0fc1c,
but I missed the .pro file. You're not supposed to use the .pro file
anyway, it's just for opening in Creator.
But if you forget to remove the qmake build step, it would get compiled.
Change-Id: Ia52ae7349e195df58f76f8d2c5f8b46adfdc7454
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
a module's project file may set MODULE_INSTALL_LIBS before loading
qt_module.prf to have an alternative RPATH linked into the users of that
module.
this is relevant only for linking against non-installed -prefix builds
of that module, as otherwise .libs from the module's pri file is used
for rpath.
Change-Id: Ib240e748cf130a71a5991dc643c368a983092ead
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Microsoft has named their new Visual Studio again
after the old naming schema.
Change-Id: Ib1b971807fa89d90b10892a2d78570058e564f3a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Nicolas Arnaud-Cormos <nicolas@kdab.com>
Under Windows it's quite possible that OpenSSL, DBUS or MySQL is
not installed into a central place. If -I and -L is
passed at configure time, it is added to all targets,
and if that path contained a conflicting header things would go
wrong.
Change-Id: Ic3338c49aa6eaa91b3abf5341e709ef604bf7aab
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
configure will now run qmake without -recursive, as on modern systems
one can get a lot more out of parallelization done by make, which qmake
cannot do.
use -fully-process to get back the old behavior. -dont-process is
unchanged.
Change-Id: I2874321a963175463ae8992f3ab2b01bc13c9922
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
i think this was a vestige from the old wince build proces
Change-Id: I13305de627c65fc1c93ba6d2383557ff5ea7a147
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
they are an unreadable and unmaintainable mess. the options are properly
documented below.
Change-Id: If2ec683fb7c3740b19798979f8a1f9cd8d84f457
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This option is important if you want to use configure's
and qmake's -sysroot (e.g. PKG_CONFIG settings, device-files),
but the toolchain (in combination with the rootfs)
is not able to handle gcc's --sysroot.
One known case is freescale's ltib setup where the toolchain
itself comes with all the essential files (e.g. crt1.o),
while the rootfs has none of those files, so gcc's
--sysroot can't be used. The rootfs on the other hand contains
all kinds of "less important" files/packages (e.g. libdbus).
For those "less important" files/packages Qt needs pkg-config
to be able to include/link properly. Therefore one needs
configures -sysroot without gcc's --sysroot.
Change-Id: Iaec9b07012f2945f3ecb3ced0ed95176721b5ecd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
msvc cannot use the same library for debug and release builds
if openssl libraries are linked statically into the network library.
Change-Id: Ic27ede2d9531b94aff4c50c1699947ce72caf286
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Without this, if you ran 'nmake qmake' or 'jom qmake' in qtbase's
top directory, it would simply tell you that 'qmake' was up to date.
After all, there is a directory called 'qmake' there.
Change-Id: I6cdb405e8106c137ecbab27923e524b924b19c84
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Detect CUPS availability automatically when cross-compiling from a Windows
host.
Change-Id: Ife9bb90732c39794a7b760ced4aaea232612fe54
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Do not build windows styles when the target platform is not Windows. This
makes a difference when cross-compiling.
Change-Id: I2184d39ed253af1069c5cdcd6a848611cff24789
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Enable auto detection for iconv when
cross-compiling from Windows hosts.
Change-Id: I699e0a31d938403f5e80e74be90df87f11f361ba
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
All auto detection tests were failing
because the default mkspec was not yet
installed during the time they were run.
Change-Id: Iad14580f38d1539d9831917e5c9c707eae4c0c90
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
In systems where no pkgconfig is available, such as QNX, we set
QT_LFLAGS_SQLITE to the default values.
Change-Id: I24edd589ce7baf2614480a91842ca756ead39463
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Tools for each module should be enabled by default.
Prior to qt_parts.prf, they have been enabled by default, but only by
accident - the value of QT_BUILD_PARTS with respect to 'tools' was
generally not respected.
Change-Id: Icd49d6128d4050ff1c865967a563e9ab88c5a3a2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
this stopped the installation of mkspecs for windows ce
Change-Id: Ic57337904b88e4460f9f4110b08ecefb1a2eed8b
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
that way it is actually possible to add additional parts from the qmake
command line.
Change-Id: I42e0b58424292cebafb57538a879204d370397bb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
this makes it unnecessary to dump qmakespec to .qmake.cache and
qmodule.pri.
Task-number: QTBUG-22700
Change-Id: I678c7ee7df2512184b9cd06d7a3be8bbd0b0da15
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this will fail now even on unix (and wouldn't have ever worked on
windows), as the full spec name is known only after reading the spec,
and qconfig.pri is read from inside the spec.
matching on the host_build flag is cleaner anyway.
Change-Id: I7da144e89ab3db0fad942d755d8cb0a0f3b85588
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Donald Carr <sirspudd@gmail.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
The SXE feature was used with Qtopia but is long gone. Clean it up.
Change-Id: I55fba97b6382300ba63e94f3a6c415227f571e37
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
refactoring and cleanup. fixes x-builds between different os families.
Conflicts:
mkspecs/features/qt.prf
Change-Id: I0205e6f07f77c9b015cf055dd87a471883949a91
qmake is needed by autoDetection()/tryCompileProject() to be able to build the
tests. This patch also add a new method - generateQConfigCpp() - which
generates qconfig.cpp, needed to build qmake.
Change-Id: Ic304a364a13a2b3c28433f2a299df222a56fed67
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
QT_NODLL is replaced by QT_STATIC, but the latter is implied if
QT_BOOTSTRAPPED is already defined. Therefore, simply remove the
QT_NODLL definitions.
Change-Id: Iac7ec0b494b7a78197c25d59547f45eaf92d7465
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Up until now, we had a mess of different macros used for building
DLLs, for building shared libraries on Unix systems and for building
static libraries. Some of the macros were contradictory and did not
work. From now on, there shall be only:
- QT_STATIC: indicates that it's a static Qt build and the export
macros should expand to empty
- QT_SHARED: indicates that it's a shared / dynamic Qt build and the
export macros should expand to Q_DECL_EXPORT or Q_DECL_IMPORT,
depending on whether the macro corresponds to the current module
being built (the QT_BUILD_XXXX_LIB macro comes from the module's
.pro file)
QT_BOOTSTRAPPED implies QT_STATIC since the bootstrapped tools link
statically to some source code.
QT_STATIC is recorded in qconfig.h by configure when Qt is configured
for static builds. Nothing is recorded for a shared / dynamic build,
so QT_SHARED is implied if nothing is defined. This allows for the
existence of a static_and_shared build: with nothing recorded,
defining QT_STATIC before qglobal.h causes the export macros to be
that of the static form. Linking to the static libraries is out of the
scope of this change (something for the buildsystem and linker to
figure out).
From this commit on, the proper way of declaring the export macros for
a module called QtFoo is:
#ifndef QT_STATIC
# ifdef QT_BUILD_FOO_LIB
# define Q_FOO_EXPORT Q_DECL_EXPORT
# else
# define Q_FOO_EXPORT Q_DECL_IMPORT
# endif
#else
# define Q_FOO_EXPORT
#endif
The type of the Qt build is recorded in QT_CONFIG (in qconfig.pri) so
all Qt modules build by default the same type of library. The keywords
are "static" and "shared", used in both QT_CONFIG and CONFIG. The
previous keyword of "staticlib" is deprecated and should not be used.
Discussed-on: http://lists.qt-project.org/pipermail/development/2012-April/003172.html
Change-Id: I127896607794795b681c98d08467efd8af49bcf3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
this was disabled before but
I2631ff687881278ba42edacd237a2130c103b69f
enabled it per default
Change-Id: Ic5a8e50d116cf6b15719668faf055967a6f34e06
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
now that the default specs really only forward to the real specs,
it is not necessary to copy any auxiliary files.
Change-Id: I169a61a045063b796062fe6af3a2afbe3f1c9da0
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Remove a non-ascii character from configureapp.cpp to let it to be
compiled successfully with MSVC2010 x64.
Change-Id: I0b016630be49e8731cc438abca4ef959124138be
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qmake can now produce proper mixed-target projects
Change-Id: I797f055f6e1487b9aefb75eee91d6c2cc4e6e56e
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
they are equivalent to QT_INSTALL_(HEADERS|LIBS)/get.
Change-Id: Ic4b47f3ca7db55785b96f19020a2fa020a8d25bd
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
properties are now split into a write location $$[FOO] and a read
location $$[FOO/get]. the write locations are hard-coded and configurable
via qt.conf/Paths as before, while the read locations are configured via
qt.conf/EffectivePaths.
this finally provides a clean solution to the problem that during the qt
build itself tools and libraries need to be taken from somewhere else
than they are installed to.
Change-Id: I956c43bd082afd465e690fe75d0bee3c2c0f7c25
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
always use normalized path separators, except when running native
commands or printing (note however that the qmake -query output will now
be consistently normalized).
Change-Id: I6ae920c3bc656cb517d1f4e4e5518cf79e002169
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
don't mess with the qmake cmdline args any more.
Change-Id: I399d87145d31d25e29951b6acd96387a3c7282f0
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
when qmake runs into the new option(host_build) command, it will restart
the project evaluation with a host spec.
the new default host spec is called default-host (gasp!). it is
overridden with the pre-exising -spec / -platform option, while the new
-xspec / -xplatform option overrides the pre-existing default spec.
specifying -spec but not -xspec will set the xspec, too, so the behavior
is backwards-compatible. same for the XQMAKESPEC override read from
.qmake.cache and the environment variable.
the cleaner solution would be adding -hostspec, to be symmetrical with
the override semantics, but that would deviate from configure in turn.
Change-Id: I4297c873780af16ab7928421b434ce0f1d3820da
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
This solved QTBUG-26111 in which qtjsbackend gets built with an
incomplete framework on Mac OSX. This was traced back to commit
6a6fd56e66 which moved QMAKE_CONFIG
values from .qmake.cache to mkspecs/qmodule.pri. Since qtjsbackend
contains config tests it creates its own .qmake.cache which was
previously masking this issue.
QMAKE_CONFIG incorrectly contained debug for debug_and_release builds
even though debug and release are already present in the CONFIG variable
in mkspecs/qconfig.pri. The changes to configure prevent CONFIG in
qmodule.pri from containing debug and release variables and ensure
that QT_CONFIG contains build_all and debug_and_release if appropriate.
Configure.app is also adjusted to match this behaviour.
The other part of the change is to qt_module_config.prf and
qt_plugin.prf. These changes take care of populating CONFIG with
the appropriate debug_and_release and build_all variables depending
upon what is present in QT_CONFIG. This ensures that the Qt modules
and plugins get built with the same configuration as qtbase.
The special handling for the qcocoa QPA plugin ensures that it is
built in release mode only to preserve the behaviour introduced by
commit 5603f94eaa.
Task-number: QTBUG-26111
Change-Id: I6f65aba50709e1b2431b8b4411ff30a06f7d8aed
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Modify configure.exe to run some configure-time tests and check if
the SSE and AVX compiler features are supported.
The tests themselves required a bit of changes to compile with
MSVC. The include in sse4_2.cpp was wrong. And for whatever reason, it
didn't like the volatile variables, which GCC, Clang and ICC have been
happy with. This should produce no effect in compilation, though: even
dead code must be syntactically correct. We're not running the output.
Change-Id: Ibe5d0904a378a7efed853c7215f88a2ddcefb1b3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Added three new methods, which are meant to be used internally to
configureapp.cpp:
- int platform(): returns an integer representing a platform
- QString platformName(): returns the platform name string to be used when
displaying the license agreement.
- QString qpaPlatformName(): returns the value to be defined as
QT_QPA_DEFAULT_PLATFORM_NAME.
Currently supported names are Windows, Windows CE, QNX and Blackberry. Default
is "Windows".
Change-Id: Ifa4d1b9c02cda956be9becdf8db195d3d494f1d5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
