We used to compute the default exclusive build directory, eg 'debug', at
configure time, and then set OBJECTS_DIR, MOC_DIR, etc to include this
hard-coded default exclusive build directory. We then had to run a post-
process step where we replaced the 'debug' part with the current actual
exclusive build pass, eg 'release', resulting in long-standing bugs such
as QTBUG-491 where we end up replacing parts of the build output dirs
that were not part of the original exclusive build directory.
We now set the OBJECTS_DIR, MOC_DIR, etc defaults in configure like
before, but they do not include any exclusive-build information. The
exclusive build directory is handled as a separate step in default_post
where we adjust all entries in QMAKE_DIR_REPLACE to be exclusive
directories.
For backwards compatibility the new exclusive build behavior is only
enabled for variables named by QMAKE_DIR_REPLACE_SANE, which for Qt
itself applies globally to everything but DESTDIR, and for libs and
tools also applies to DESTDIR. The reason for leaving out DESTDIR in
the general case is because many tests and examples assume the old
behavior for DESTDIR. A side effect of including all the other
variables for Qt libs and tools is that the PCH output dir will be
uniformly set, which has been an issue on Windows in the past.
The addExclusiveBuilds function now takes two or more arguments,
each argument being the key for an exclusive build, which can be
customized eg. using $$key.{name,target,dir_affix}. Passing more
than two arguments results in three/four/etc-way exclusive builds,
eg debug/release/profile. Exclusive builds can also be combined, eg
static/shared + debug/release by making two calls to the function.
We also handle individual targets of combined exclusive builds,
eg static/shared + debug/release, meaning it is possible to run
'make debug' to build both static-debug and shared-debug.
Task-number: QTBUG-491
Change-Id: I02841dbbd065ac07d413dfb45cfcfe4c013674ac
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Otherwise we won't pick up CONFIG+= changes on the command line or
from the project file.
Change-Id: I6f7e9380f971e6271de5659534e9565024fe041d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
module names use dashes, but the internal module representation uses
underscores, so we must translate.
Change-Id: Ib6983d3731e7dae2a4d6232f8a5202390fd425e9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Before this patch, we would copy "$QTDIR/qml"
directly into the bundle as "qml". This would cause problems
if the user also tried to deploy qml files to a "qml" folder, or
if any other file in the bundle ended up with the name "qml" (which is the
case for QtDeclarative/tools/qml, where the executable is called "qml").
This patch will instead copy the contents of each import folder
into QMAKE_QML_BUNDLE_PATH, which will default to "qt_qml" on iOS
and "Resources/qt_qml" on OSX.
We also change the implementation to use a post script rather
then QMAKE_BUNDLE_DATA for two reasons:
1. Xcode does not like "copy build phases" to copy folders, only
files (You cannot even create such a phase from Xcode, although
it is possible to force it the way we create project.pbx. But
this was error prone)
2. We need to strip away unneeded files from the bundle, like
archives (which are linked in statically, not dlopened run-time).
Using rsync lets us copy and strip in one operation.
Change-Id: I7c2117f6cfbe11efdc272dff71adb0b1e619a5ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Synchronize .pdb file writing, otherwise parallel builds
will fail, when different compiler instances try to access
the same .pdb file.
See also
http://msdn.microsoft.com/en-us/library/vstudio/dn502518.aspx
Change-Id: I4998f10458d320fd98d633eded02d90bf25ed884
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the module project files declare what plugins they need, as that is
necessary for automatic android deployment.
enable wider usage of this by making the information available from the
module .pri files.
caveat: the variable is called "types", but is in fact paths, so there
can be particular plugins named.
use this new facility to replace the egregious hard-coded list of
plugin-to-module mappings from create_cmake.
possible todo: automate populating DEPLOYMENT (for wince, and whatever
else).
Change-Id: Ibb9c07cfe2b0008905204cbeb81e9c8e2ae4dc69
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
instead of being magic attributes of the main modules, the privates
are now proper modules of their own.
this cleans up some code paths, is more mappable to other build tools,
and enables private modules to depend on other private modules.
note that the library path is needed even in the "empty" private
modules, as in the framework case that's where headers are found.
consequently, the modules need to be explicitly marked with the new
"no_link" flag. this required some reorganization of qtAddModule().
Change-Id: I8e4f44a609f8d639cc01bcb658256870a627eb63
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This is needed to ensure that list(REMOVE_DUPLICATES) can work.
Change-Id: I3d992aa244fcdfbda7e3b48ce416e0ba5ffcde96
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is necessary so that list(REMOVE_DUPLICATES) works properly.
Change-Id: Id268637d76b1a8785c9ff0c6e09e9ad8a62bbfb6
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Allows project files or mkspecs to call qmake recursively using system()
with the right arguments, which we use to fix the ios default_post.prf.
Change-Id: I90d69e2b156bb0f0af1279188b11f81c84c24fb8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
it was introduced as a hack to simplify writing tests, but the change to
make use of it was backed out of testlib and nobody seems to care.
Change-Id: Icc86621b865276e86593afdb923247bbdca19d49
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The current NDK uses CPUVARDIR variable to define whether x86 or armle-v7 is used.
Therefore, the whole structure uses these two definitions to separate simulator
and device builds. Renaming blackberry-armv7le-qcc to blackberry-armle-v7-qcc
allows to directly use CPUVARDIR during Qt5 builds.
For compatibility reasons the old folder is kept and includes the new qmake.conf.
Change-Id: Ia7feeeabe16eda48140a65178af28cbb9bd085a9
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
it's wasteful, given that exactly one add-on module (and most probably
nobody else) needs it.
i'd do the same with yacc and lex, but i suspect this would cause quite
an uproar.
Change-Id: Ic2a6ca19e829393835f824e31cd0893e78c3fd39
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Otherwise, make would upon distclean first remove the xcode
project, then try to do xcodebuild distclean. xcodebuild would
then complain about a missing project.
Change-Id: I0a9a6af6d86d1a95e37f4bbafa38c63d892bf1cc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the variable may contain a complex command, so an exists() check is
doomed to failure if the tool is built dynamically.
also, the check is not really necessary: it failing indicates a bug in
the qt build system, and we don't really need to complicate the code to
deal with such corner cases.
Change-Id: I2e6087dcc6dd4a4f70bdf739550276f364c880dd
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
if the user knows that no additional imports need to be linked, this
can be used to optimize the build time.
as it happens, it can also be used to fix the build of the qml tools
themselves ...
Change-Id: Id77aea1f20cabdc2e831540c61d8a4b8e85c040b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This was created for the iOS port and intended to be cross-platform,
but since then they got cold feet and never added the support.
It makes no sense to only support this on Android. We need to
remove it again and hold off until we can find a proper solution.
Editing the AndroidManifest.xml is the non-cross-platform
solution for this.
Task-number: QTBUG-34166
Change-Id: I51d53b82a3412a9016de01612dd8df9ae12c6633
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Setting QT_ARCH when empty is a workaround for a missing qconfig.pri,
since it hasn't been written yet by configure. As qconfig.pri is
loaded by the generic qt_config.prf, putting our workaround in
our own wrapper for qt_config makes sense, as it keeps the logic
close to where the original QT_ARCH is resolved.
Change-Id: I49ffc21cf5dea5ca5b6254ca8084a4dcdc359a72
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This approach is similar to the earlier apprach of defining main=qt_main
when building the user's sources, but uses the linker to rename the
symbol instead, which is less fragile than using the preprocessor.
To keep the hybrid usecase unaffected by our wrapper logic we declare
both our main wrapper and a fallback qt_main as weak symbols, which
ensures that when the user's application links in our plugin the
real main/qt_main provided by the user is preferred over our weak
symbols.
Change-Id: Ic76f3ba8932430c4b13a1d3a40b8ed2322fe5eea
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Run qmlimportscanner, add found plugins to the LIBS
line, generate qml_plugin_import.cpp.
Change-Id: I6c6b927cceb36fa2dc405ad698f26d20398b33c8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
This code was added as an optimization for showing a mouse cursor on
the Raspberry Pi. What happens though is while the mouse cursor does
move more smoothly, the actual application becomes less smooth when the
mouse cursor is moved. By removing the custom cursor code, performance
will no longer be effected by rendering a moving mouse cursor.
Change-Id: I9f8ac6c236cd4ff6d8e1d999a461c3e6db75d7e3
Reviewed-by: Samuli Piippo <samuli.piippo@digia.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Non-framework builds would automatically link to whatever Qt library
matched the config at the time of running qmake, eg hard-coded to
libQtCore_debug, while Xcode itself allowed the user to switch between
release and debug configurations.
We now append an Xcode settings variable to the library path, which gets
resolved at build time depending on the current config in Xcode.
Change-Id: I12873e38a28d9595ef3fd0ae0ad849e6744833a9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Change-Id: I2e874af4f5bf22a3028b7099c39436c400136386
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
When building for x86, the prefix for the tools is not equal
to the prefix for the toolchain directory, so we need a separate
option for this.
Task-number: QTBUG-34110
Change-Id: Iefe8c37892eb6c31fc8762bfb7bc7c6c23cd8b1e
Reviewed-by: BogDan Vatra <bogdan@kde.org>
The source includes shouldn't be used by installations, so
don't install the extra file, but only use it if the package
is used from the build-dir.
Task-number: QTBUG-33970
Change-Id: I08f91b8a716e935cb04d1233d44cf5c092e240ce
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The DLLDESTDIR is not related to the install location and is not
populated for prefix_build configurations.
That resulted in the CMake files attempting to find the dlls in the lib/
directory instead of the bin/ directory.
Change-Id: Iec6a7c9b6dd656278b70ab128f3df9e8c45bbe4a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
* The explicitly linked support libraries like gnustl_shared, etc. can be
linked as private libs, there's no need for them to show up in the .prl files of our libraries.
* Removed the explicit linkage against libsupc++, which is a static library whos symbols
are also available in libgnustl_shared. It is only needed when linking against gnustl_static,
which we fortunately don't do.
For QtQml on Android this is more than just cleanup. Without the first change, the libgnustl_shared
comes early on in the link line, because it is a dependency of for example Qt5Network. Anything that
qml.pro itself adds to LIBS comes afterwards. That is not intended, we want libgnustl_shared to come
at the end of the link line, in order to make sure that the linker finds an overriding symbol from
another library earlier in the link line first.
The explicit linkage against libsupc++ affects the same, as that's the library
that contains the symbol we want to override locally (__cxa_end_cleanup).
(needed for QTBUG-33892)
Change-Id: Id6dff733d6610ae8b15aa72f9cf60ae2c7834194
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
We assume new Xcode versions and toolchains won't break anything, just
like for toolchains on other platforms.
Change-Id: Idb723dbcdbc82e85db1c55b19cd5fe863ca90933
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
As they are closely tied to the macx-ios-clang mkspec and can't be shared.
Change-Id: Icb59304cc1e4be12732f50175f3f84be289300c2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
The allows us to remove the custom logic in default_post for finding
the plist files, and also fixes issues when the wrapped mkspec had
its own feature files.
Change-Id: I4c26cf6a7809f527e170c51c57f59aaf6088774c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the problem is that there is no sed command on windows ... so build it
into qmake and invoke that from the generated makefiles. cmake does the
same, after all. ^^
Task-number: QTBUG-33794
Change-Id: Ib7077e18acbc5edd79f714c5779a5ed31ea6c093
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
When we build qml plugins, we now depend on embedding
the uri of the plugin into its meta-data using the new
-M switch to moc for static builds.
This patch will let this happen automatically whenever you
call load(qml_plugin) from your pro file.
With this patch, you only need to rebuild your plugin
to support static applications.
Task-number: QTBUG-28357
Change-Id: I99e2fc80688fa43cf734551553f4fa0cb5ed47ed
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Shared between UNIX and Win generators, and allows prfs after
default_post to rely on sane TARGET and DESTDIR values.
This allows us to clean up the DESTDIR logic in testcase.prf,
which was completely busted. Doing the two in separate commits
is unfortunately not possible as the old testcase.prf logic
was so broken it would barf if only looked at.
Change-Id: Ibf21216195c760ee46ae679c162b207b77a9d813
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Enabling vsync and double buffering improves the overall impression.
Enabling by default helps to get the best "out of the box"
If not desired, one can disable this behavior via:
export QT_EGLFS_IMX6_NO_FB_MULTI_BUFFER=1
Change-Id: I21ce5366ea5829140d8103cf2dbd8c487d079db6
Reviewed-by: Donald Carr <sirspudd@gmail.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
When outputting the deployment settings on Windows, the paths might
have backslashes. These need to be escaped, otherwise they will simply
be removed by the JSON parser (or converted into whatever they happen
to represent given the neighbouring character.)
Task-number: QTBUG-33926
Change-Id: I11f1bc7d1f8082c73329bdc02fb8d653a0b5c0ee
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Whenever the SDK updates the build tools it's put inside a new
subdirectory with the version number, so with every new version
we would have to update the java.prf feature. Instead, we iterate
over the available revisions and pick the lexicographically highest
one (which is sufficient as long as the major version is
double digits.)
Change-Id: I2392ef6261ef36ed741c80fa6f981486e7844e0a
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Without that define here moc cannot handle qsystemdetection
properly. While having to touch the mkspecs I also removed
the no longer needed WINRT define.
Change-Id: I0609bd173c7bc14ccdd862afc777d7793dda02b8
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Without bash's pipefail option we would end up with the exit code of
grep. Since we don't know which shell the user is running, we have
to explicitly call bash.
Change-Id: Ic3f6db0af9bb90a58001ccfbf9d6d21b6c9c9634
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Using the same approach as, wince qfunctions_winrt
is introduced to replace functions not available
on Windows Runtime by their successor functions/
equivalents.
Additionally this functionality is used for implementing
a fake environment because WinRT does not support
getting/setting of environment variables. The approach
here is also the same that is used for wince.
Change-Id: Ifc3b6b796ab8e8ea41456f4c929f9c3f65f24a0e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
A common problem is that examples and other apps are unusable on
Android when they are inside the Qt directory. There doesn't
really seem to be any good reason for having a special case in
place, since this will only affect applications which are not built
with the host toolchain, and we aren't building any command line
apps for the target devices. So the only thing this will affect are
the examples and we want those to be installed into the correct
path.
Change-Id: Ibae365e06eb77944f11e596c16c3c5baf798848c
Reviewed-by: BogDan Vatra <bogdan@kde.org>
We need to output integers here, since these are interpreted
as integers when reading the json.
Change-Id: I4206b3ac347b61a357bd2658f146979e06690141
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
By referring to crt.o by $(SDK) we allow Xcode to switch between the
iPhoneSimulator and the iPhoneOS SDKs.
Change-Id: I33d9f30b2f5a8f085dc4ddfc6e2ef228d02d639c
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
When warnings are treated as errors, no Android code will
compile, since one of the platform headers in the NDK triggers
the literal-suffix warning. So we need to mark this as no-error.
Change-Id: Icabf1c2f2d32f76ee157d04e62a28f83abeed8f1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If you specify ANDROID_API_VERSION to override the default
API versions used for building the jar files, this should
take precedence even when the .pro files specify a different
default API version (like QtAccessibility does when it sets
the default to android-16.) Otherwise it's impossible to
override these defaults.
Change-Id: Idef98aaf3b51490bd7ced8c53770ee2f5680b1db
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
Various global changes, primarily preprocessor flow, to support the
WinRT platform.
Change-Id: I3fa9cf91d5fb24019362e88fcf205e31b4f810b5
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
This outputs a json file with the necessary settings from qmake
so that an external build tool can easily get the settings without
having to parse the entire .pro source. Used by the androiddeployqt
tool.
Task-number: QTBUG-32856
Change-Id: I5d3ac0ab6a0350162d06b0a0bf0c9bcbd90d8b5a
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Remove the extern prototype as it's now defined in latest
firmware headers correctly. Moreover, the signature of the function
changed. This patch fixes both issues.
Change-Id: I0114b436dbaf5a171e6429a1e3760e292c7152cf
Reviewed-by: Andy Nichols <andy.nichols@digia.com>
WinRT passes the executable and Appx server info to the CRT main, and
supports several additional activation arguments as well. This handles the
arguments passed to main as well as the case where a modern app is
launched from an external application (e.g. Qt Creator).
Task-number: QTBUG-30198
Change-Id: Ia843e98c7843d5705f5f6d1c809de0b6bcdb5d26
Done-with: Kamil Trzcinski
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Warnings 654 and 411 appear to have disappeared by ICC 14.
Change-Id: Ic200f239a4a4377015d13b2f4ae85595ce864ace
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Apple only provides simulators for 5.0+, and we now rely on 5.0+ APIs.
Change-Id: I9ec047767b5f5e1b33aeef186ec6aff2b9c70a05
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
It's a supported platform from 5.2, and we want build-scripts/CI/etc to
adapt to the change as soon as possible.
Change-Id: I8c78351191f59a6ecab33acc0829d2535379c787
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Simo Fält <simo.falt@digia.com>
Instead of using a define to rename the user's main() function during
compilation, we leave the user code alone, and inject our wrapper one
step earlier in the process, at the application entry point 'start'.
This entry point is provided by crt1.o, which is normally linked into
the application automatically. The start() function sets up some state
and then calls main(), but we change the start() function to instead
call our main wrapper.
Instead of shipping our own crt1 binary/sources, we make a copy of
the appropriate crt1.o at build time, and modify its symbol table in
place. This is unproblematic as long as we keep the same length for
the wrapper function name, as the symbol names are just entries in
the global string table of the object file.
The result is that for the regular Qt use-case the user won't see
any changes to their main function, and we have more control over
the startup sequence. For the hybrid use-case, we no longer rely
on the fragile solution of having our back-up 'main' symbol in
a single translation unit, which would break eg with --load_all,
and we don't need to provide a dummy 'qt_user_main' symbol.
OSX 10.8 and iOS 6.0 introduced a new load command called LC_MAIN,
which places the state setup in the shared dyld, and then just
calls main() directly. Once we bump the minimum deployment target
to iOS 6.0 we can start using this loader instead of LC_UNIXTHREAD,
but for now we force the classic loader using the -no_new_main flag.
There's also a bug in the ld64 linker provided by the current Xcode
toolchains that results in the -e linker flag (to set the entry
point) having no effect, but hopefully this bug has been fixed
(or Apple has switched to the LLVM lld linker) by the time we
bump our deployment target.
Change-Id: Ie0ba869c13ddc5277dc95c539aebaeb60e949dc2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
The cmake directory may not be $PREFIX/lib/cmake, but
instead $PREFIX/lib/<arch>/cmake. Getting the PATH of such a
directory will not lead us to $PREFIX/, but to $PREFIX/lib.
Use a relative calculation instead.
Task-number: QTBUG-33223
Change-Id: Ice4e0f859ab1df238bad4eb942f073e84dd86cc3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lisandro Damián Nicanor Pérez Meyer <perezmeyer@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Commit a7ba0ad93e introduced the -Wno-
language. The warning about deprecated functions, variables or types is
-Wdeprecated-declarations.
Change-Id: I6d269851afefc6a3fc3bf6599c3c702eb164245e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the redundancy is entirely unnecessary at this point.
the cmake problem that prompted the revert has been fixed long since by
commit 4f5f9331d9.
This reverts commit 215f137e29,
thus restoring 6d61dfdbb74a2055438b999c6962f89cc3388eea..
Change-Id: I94749dc18d924163e9c9add500078d88ccd00ffc
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
"Make QGuiApplication::exec() run within NSApplicationMain()"
"Make Qt process native and timer events on Cocoa applications"
"Cocoa: Fix QFontDialog, QColorDialog auto-tests"
This reverts commits
1e14762b8de4b2a0b4badf7944e7d7
Change-Id: I80b65b5ee0297b090f807bd420664233dfc44f7b
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
We follow the same pattern as for iOS and Windows ports, making
sure the user's main() runs in a platform friendly environment. In
this particular case, it means calling the user's main() during the
call of NSApplicationMain(), and calling the user's main() function
(renamed to qMain() as in Windows) after receiving
NSApplicationDidFinishLaunchingNotification. In practice, this means
that NSApp is running when qMain() is called, and therefore when
QCoreApplication::exec() is called.
For those command-line utilities running on QGuiApplication, or any
deriving class, and that do not provide a bundle, we override the main
bundle's dictionary and get NSApplicationMain() to run as usual.
Added cocoa/cocoamain "subdir" to build libqtcocoamain.a (together with
cocoa/cocoaplugin -- plugins/platforms/cocoa is made a subdirs project).
This library is linked against all GUI Qt apps and provides the actual
main() function. It also catches the launching NSApplication notifications,
and calls the user's qMain() function. Note that this will happen in the
same cases when the user's application will run with the Cocoa QPA plugin.
Launch related code in QCocoaApplicationDelegate is moved to libqtcocoamain,
QNSApplication is removed (but sendEvent: redirection still there), and
code in QCocoaEventDispatcher dealing with calling [NSApp run] and related
has been removed since it's become unreachable.
ChangeLog: [Qt for Mac] Make QGuiApplication::exec() run within NSApplicationMain()
Change-Id: I790e5138c29aac2e0215a9147d0148fece40ca22
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Qt Creator needs to parse the qmake.conf in order to get the
architecture for this Qt build when the Qt build is added.
At this point it does not know that it's reading an android
project, so it can't set the right environment variables. By
moving the error to the bottom, we let Creator parse the whole
file before getting an error, so that it can detect the options
it needs to define the Qt version.
Change-Id: I119523cb21e330dc5e957a6992476c4c3d4ab7b5
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
The previous commit was unnecessary.
The value of QMAKE_CFLAGS is used for QMAKE_CXXFLAGS as well.
This is done in qcc-base.conf, which is included via
blackberry-armv7le.conf -> qcc-base-qnx-armv7le.conf -> qcc-base-qnx.conf -> qcc-base.conf
Currently, the BlackBerry arm compiler calls show duplicate entries.
This reverts commit 539f90e971.
Change-Id: I6e055ce9aafd16e91e15817946b7561bd76ee43e
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
It sounds like a good thing to have this warning, but for
future-proofing we can't have it. The system libraries might change
and add deprecation marks (OS X does that often). If they do that, we
don't want poor developers to have to fix all warnings before they can
build Qt again.
Change-Id: I4ff317da0de596c470bb1efe6e59bcf70aeec8fc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This allows us to go back to older versions of Qt with newer compilers,
that didn't exist when those versions were released. It also allows
someone upgrading their compiler and not being faced with having to fix
all warnings before Qt compiles.
This commit whitelists the following compilers:
* Apple Clang versions 4.0, 4.1 and 4.2 (OS X only)
* Intel Compiler versions 13.0, 13.1 and 14.0 (Linux only)
* GCC versions 4.6, 4.7 and 4.8 (all OS)
Notably, Clang on other other OS besides OS X and MSVC are missing.
Change-Id: I665160d40a59336da1904f2a6c1eda543e592b48
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Gcc 4.8 uses dwarf-4 by default which is not supported
by the GDB that is officially shipped with the NDK.
Change-Id: I913a038e095df52b0defd5d3da2606ef2e5456b7
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Due to forcing java 6 we need to pass the
bootstrap jar file (android.jar).
https://blogs.oracle.com/darcy/entry/bootclasspath_older_source
Change-Id: I530a7e2a7df40813011a6dde93d6ccc3aaaa61d6
warning: [options] bootstrap class path not set in conjunction with -source 1.6
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
This is new in CMake 2.8.12 and replaces the old properties
matching IMPORTED_INTERFACE_LINK_LIBRARIES_<CONFIG>.
Change-Id: I5d4c454972f2535f6792e95718c73d80c56ac24c
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This makes the diff clearer when adding plugin information
in a followup commit.
Change-Id: I857d9f71b08074f2ffa2f852ad72e5dd975adc3e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The first word of the .name variable of each extra compiler is
used as a key in a container that keeps track of them. See also:
qmake/generators/win32/msvc_objectmodel.cpp: VCProjectSingleConfig::filterForExtraCompiler
qmake/generators/win32/msvc_vcproj.cpp: VcprojGenerators::initExtraCompilerOutputs
Task-number: QTBUG-32912
Change-Id: I7ea5c58884db559621f50740075b7f2e4e3ef7f8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
under normal circumstances, any errors will be noticed already by the
pkg-config --exists call, which is silent anyway. therefore this doesn't
change anything in normal qmake usage.
however, lupdate's and creator's evaluators skip the --exists calls and
subsequently invoke the normal query, which then prints useless noise to
the terminal.
Task-number: QTBUG-28159
Change-Id: I536412060f3830aafeb0587f855cd6af11227bca
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Windows CE 5 and the depending Windows Mobile
is not supported.
Change-Id: I81b9599f837590a1375b6340e58c47b478c079ba
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Set the SONAME to the library name without the major
version number appended, as android does not have the versioned
symlinks.
Change-Id: I41c504869019a393a3f112b2f7fc81c7ad5afa1c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
qmake expects the generator to be the same for each node in the tree
of subdirs, including the leaf projects, which caused failures when
qmake tried to recurse out to the leaf projects and run 'make', when
the leaf project was an Xcode project.
We now wrap the Xcode project in a meta-makefile that just
calls out to xcodebuild to do the actual work. This allows us
to get rid of the hacky generator detection, and use the macx-xcode
mkspec instead of setting the generator, which is much cleaner.
Change-Id: I2fed6a4dd6343b6a320eb459ecae824553bff459
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
sed versions other than the GNU one often default to being POSIX-compliant,
in which case "+" (with and without escaping) is always an ordinary
character.
Achieve the same functionality in a way that works with both GNU and BSD
seds by using "xx*" insted of "x\+".
Change-Id: I1d2576a8c0e17b31f01a44d9632c57991e53780d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
To instrument a Qt application or library with the gcov coverage
tool, do `CONFIG+=gcov' in the application .pro file.
To instrument Qt itself with gcov, use the `-gcov' configure
option.
Change-Id: If24e91d95318609b0df1a76ed6d679bd92bcaab2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Return the native display created in QEglFSImx6Hooks in
platformDisplay().
Change-Id: I2b28ac66dce12a1054fc2f78dbfad0723f8e5688
Reviewed-by: Andy Nichols <andy.nichols@digia.com>
When building in thumb mode for armv5 applications will crash
with SIGILL on startup. This has been observed on armv7 devices
and emulators. It could be a bug in the gcc 4.4.3 toolchain, but
since the other toolchains in the NDK have other bugs that
make it impossible to use them for building, we need to disable
thumb until the cross-compiler has been fixed.
Task-number: QTBUG-31338
Change-Id: I22dd228158ef8c43b0b1d6e549d5725c1930536b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Change the version number to 1.0, and use the public doctype.
Change-Id: I9b071c80c410c31c38813c4447edd7b186226fab
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Now arm specific -mfloat-abi flag is added to compiler flags
only for arm architecture in linux_arm_device_post.conf.
Change-Id: Ie77ac6e0717d9d1fd9c14e1d6a26e86f08ab418c
Reviewed-by: Jarosław Staniek <staniek@kde.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Change-Id: I68d087b15839418008db5bf1c0c76ca303245519
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The $$path may already be absolute, so prepending a slash may
result in //usr/lib, for example.
Task-number: QTBUG-32570
Change-Id: If7a4f6fbec0216404cfe48c1da62d21d75b3e272
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
... as that causes debug+release installs to overwrite each other's
postprocessed files.
introduces CONFIG+=sliced_bundle, which instructs qmake to create
file-by-file install commands. we don't know whether people are not
putting files outside qmake's knowledge into the bundle build dir, so
this mode is not necessarily backwards-compatible, and thus off by
default.
Task-number: QTBUG-28336
Change-Id: I23e90985ccd3311f0237ed61aadca6d7ed8325b7
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Some packagers don't want to install the private headers.
Check the existence of private headers only if the 'Private' component
is specified when finding the package.
Task-number: QTBUG-32466
Change-Id: I1fdbfb25e8ce485cd051564b937f766b2733741a
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Use "_" instead of "-" in variables so variable replacement works
properly.
Change-Id: I2b17dca8f2351bc0933c165017f3fbb9393b0514
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
For developer builds, there is no need to run the test a second time.
Change-Id: I3564874cb2e9d6cc243e25a89ecd7f89df23b0bd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Should not be needed anymore (as of 3d0a60aaa4), as we now use libc++
automatically when C++11 support is enabled.
The specs were deprecated in Qt 5.1 (commit f7a7859a7).
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I6653f191b99f7c51c3f02a62c6ef68591b2dfa70
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This gives us better consistency across the Qt ecosystem.
Change-Id: Ie12ebb6e8c826ed2e0445eb37de0b79595da41c2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The test should still be run, even though it is insignificant.
Change-Id: I6a3853e2b0e9670152b4f329dbceed2986a7e008
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the forward-referenced directories don't exist yet, so we get pointless
warnings. in fact, this is why we do a multi-pass build in the first
place, and consequently using indexes during the first pass is
illogical.
Task-number: QTBUG-32152
Change-Id: I66bf6b43238827e87cb8bf6932d581b808c1032d
Reviewed-by: Martin Smith <martin.smith@digia.com>
the previous attempt broke ActiveQt, as it actually has public modules
without headers (they are provided by a common base module).
so explicitly mark the internal modules as such instead of applying
heuristics.
Change-Id: I8d8a2ee66f02c3444da2036a497e7f382f089f62
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Google moved dx.bat into a new build-tools/VERSION folder
meaning our dx.bat no longer found dx.jar. Fix this by
passing into our dx.bat, the location of the real dx.bat
Removed hardcoded 17.0.0 and %ANDROID_BUILD_TOOLS_REVISION%
path searches.
Change-Id: I91c12c01745d6f12edbd126102b8f06eba291402
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Add mkspec win32-msvc2013 and make VS 2013 known to configure and
qmake.
Change-Id: I6e63a4d679727a8a3f068f377956185996d72bce
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This reverts commit 1ef74a763a, as
assembler files in SOURCES break compiling with -pch, as we don't create
a respective PCH.
instead, compile assembler code with QMAKE_CC, not QMAKE_CXX.
the reason why this change is needed in the first place is not clear to
me, but i guess that CXX defines some c++-related macros when
preprocessing the file, which breaks further down the line. this is
counter-intuitive, as the g++ frontend should treat the same sources the
same way as the gcc frontend (differences should be limited the the ld
invocation).
Task-number: QTBUG-29765
Change-Id: Ic0116b3a5fa621f12ac41cadf3062ff00b538e85
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
if a private module was used without the suffix, it would not add any
include paths, but the library would be still added. as long as the
includes were written as <Module/private/Header>, this would not become
visible, as the public modules would add the common include path ...
however, this soon won't be the case for mac frameworks any more. this
change makes the problem visible early on.
Change-Id: I8b1a20313ad736cb49507f07fa623e9aa812f651
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The Qt CI system runs the unit tests after installation, but
with the qmake in the build directory. This means that the
installed content is not unit tested. Add an additional cmake
unit test to test the files in the install location.
The new test is marked insignificant for now until the true
effect on the CI system is known.
Task-number: QTBUG-27315
Change-Id: If9f12e88cfc741946cfabc25dbf789a11a2af4b8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The 'BUNDLEIDENTIFIER' key ensures that we generate an rfc1034
compatible identifier.
Change-Id: Ic5cefb8ae888d768dd793813e7ee3c23c9a5582a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
We haven't fully agreed on whether headers should be in $includedir or
not for builds with frameworks, since frameworks carry their headers
inside. However, this change came too late for Qt 5.1 for us to assess
the potential impacts -- it's known to break at least the cmake files we
ship.
So restore the build to the way it was.
This is a partial revert of 6d61dfdbb7.
Partial because the old behavior was partially broken: it did not
install headers for release builds. Now we always install (and in
debug-and-release mode, we might do it twice).
Task-number: QTBUG-32134
Change-Id: Ib84879c5a148d3717d16a7a90b2f5735fb5d80be
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
only the include statements found in public headers are constrained to
work with this flag. our own c++ files and private headers can use other
styles, which this flag breaks.
Change-Id: Icb1ced17dc438083731049788ac28349c87ba7ef
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
they are a somewhat different kind of private headers, but follow
generally the same logic.
Change-Id: Ic6f42ed7061dde2ffd0e32b1d713354b58a20970
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
We handle C++11 and libc++ through c++11.prf now, so separate mkspecs
are not needed. Deprecating them allows us to remove them in a later
release.
Change-Id: I4e525f445aeab88c926fa62cedef6aa9b32a7f55
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Erik Verbruggen <erik.verbruggen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the entry for the normal headers already ensures that there is the
correct version symlink. having an entry for the private headers as well
is pointless, and in fact clobbered the symlink for the actual library.
Change-Id: I2403761bf006b7bfa490ce85c7b0e46d5ef203c0
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
There have been fixes done to the MSVC qplatformdefs.h that aren't
reflected in the ICC one -- specially the inclusion of
windows.h. Since ICC is never tested, simply defer to the MSVC one and
hope it's enough.
Task-number: QTBUG-30839
Change-Id: I3c22638cc7fac3399d3606b1583608e95208df6e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the only case where we want to skip copying the bundled data (which is an
optimization only) is the debug sub-build when we are actually building
both debug and release.
Change-Id: I1f3f67ccd9a64033b133ffaf58639cd9f7107c27
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
i see no particular reason why debug builds should still get
"normal" headers.
Change-Id: I3625648549e8c234a365bab26823190ed2219cdf
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
there is no point in adding a structure we don't actually define.
Change-Id: Ica43123f17eca6ebd4b5b7ec2526ebabef31c82a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
it's cleaner, and it makes it possible to actually have a single else
branch.
Change-Id: I5ef917b678e2bd5a2face8ee19e942e5e952aa80
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
don't mess with the -F linker flag manually. qt headers include other
headers via the canonical Module/Header syntax, which means that the
compiler also needs the -F flag. QMAKE_FRAMEWORKPATH does exactly that.
Task-number: QTBUG-29003
Change-Id: I5f4af1a462697cd6996c54436ccdb9fc2b216020
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
... except for MAKEFILE_GENERATOR = XCODE. This means the spec no longer
hard-codes g++, and will work regardless of whether the default spec was
clang or g++.
This require us to set QMAKE_XCODE_GCC_VERSION properly for GCC, so that
additional compilation flags passed by Xcode will match the actual
compiler used.
Task-number: QTBUG-31713
Change-Id: If65140a7471cd16f483036742f1d5b86d0485c52
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Otherwise doing stuff like -spec macx-g++ when the default spec is clang
will not have an effect on the tools used.
Change-Id: Ia2769abfdd8c19f79d427b9f09707430e736305a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
If Qt was built with C++11, it links to libc++, and we need all projects
that use Qt to link against the same library.
Technically, we could do QMAKE_LFLAGS += -stdlib=libc++, but that hasn't
been tested enough without also enabling C++11, so we keep the
relationship between the two for now.
Change-Id: Ic628bcbade60cc82f93707f372c2119c24d9dc8a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Liang Qi <liang.qi@digia.com>
The cmake variable for the mkspec dir must specify the source
location if used in the build dir, and must specify the install
location if used in the install dir.
Change-Id: I2fee8cd0c7198e9fc5cbb63972e20c75636672d1
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
the evaluator has the bug that function arguments are inherited.
work around that by passing an explicitly empty 3rd parameter to
qtAddTargetEnv().
proper fix upcoming in less critical branch.
Change-Id: Ic45cc890abaa6271985590d4ebe02c96bff6dec4
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
qtAddModule() always returns true anyway.
the real checking is done by qtAddModules() and qtAddLibrary() itself.
Change-Id: Ieed821acc36dc57ca52aec3e6b2dd6513be9b6c1
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
unlike the .command, the .depend_command is not executed by make via its
chosen shell, but qmake itself via the system's native shell.
consequently, it needs different path separators and no make-escaping.
Task-number: QTBUG-31289
Change-Id: I480f815753632db6e8d4725f463f8a1fc59680a6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
nmake needs %-escaping in addition to $-escaping, not instead.
this has little practical impact, so it went unnoticed.
Change-Id: I144b6142eec0151d83a22e0ac5ead7b0415cdafa
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the vs ide executes the commands verbatim, so they must not be
make-escaped.
Task-number: QTBUG-31289
Change-Id: Ie73fd5c4da5527c2d10bc94ccdf60f8a1ca21351
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the precise syntax depends on what exactly the command is used for, so
we need to resolve it at the last moment. see followup commits.
This logically reverts commits 6f4ff81380
and 731e6bece5.
Change-Id: If285c91d7521069be86d32593b5c2ae2027b3038
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Change-Id: I840f963c3648d123b31f79aa2c8902c0ad74e982
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
instead, use the files directly from the source dir.
Change-Id: I03b728c66de6e03cade6dc153dcc78cea8e3f606
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
We can combine the hybrid and non-hybrid use-cases into a single static
library if we are careful about which symbols are included in which
object files. By limiting the main() and qt_user_main() functions to
their own translation units, the linker will only pick them up if they
are missing at link time (the user's program do not provide them).
This technique is resilient to the -ObjC linker flag, which includes all
object files that implement an ObjectiveC class or category, but will
fail if the -all_load flag is passed to the linker, as we'll then have
duplicate symbols for either main() or qt_user_main(). The latter should
not happen unless the user provides the flag manually, and in the case
he or she does, there's ways to work around it by providing less global
flags such as -ObjC or -force_load.
Change-Id: Ie2f8e10a7265d007bf45cb1dd83f19cff0693551
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Instead of force-loading the whole static library of the platform plugin
we tell the linker to look for the missing symbol qt_registerPlatformPlugin.
This symbol is provided by the same object file as the plugin's static
initializer, so the object file is included in the final binary and
the static initializer is run, resulting in the plugin registering with
Qt.
We could have marked the actual static initializer wrapper provided by
Q_IMPORT_PLUGIN(QIOSIntegrationPlugin) as undefined, but due to the C++
mangling this would look less intuitive on the linker command line than
the custom dummy function that we provide, which has C linkage.
Change-Id: I6805537e1f49260a41d48c555376964cb1fe75d8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
the commands are already quoted appropriately for the shell.
Change-Id: I746bb5fba2cd6548c5dc7ef81087c69a200ecbb8
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
in the actual specs, we also set 'gcc' for clang.
Change-Id: Ifc6b27d56596f34c944205795d665f545d090f80
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
These directories are not currently part of the Qt installation for mac
frameworks.
Task-number: QTBUG-31641
Change-Id: Ifef372cc2ebb692f9ae5a7b1f8dba5f683d1e7eb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is actually a list in CMake, not a value to be prepended
to paths. Specify the QT_SYSROOT instead to root the location
of include directories. CMake will soon get a CMAKE_SYSROOT
variable which will replace this.
Change-Id: I239f69f127f3676a3835aa4f29638f44ef209819
Reviewed-by: Volker Krause <volker.krause@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
nonrelocatable adds the full uri to the exported type information
which is the correct thing to do for the qt plugins (and 99% of
the cases).
This way import bla.x 1.0 works correctly in the code model.
Change-Id: Ia06873dd8b2ea4627e3297a98e8df87275ceaf73
Reviewed-by: Alan Alpert <aalpert@blackberry.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
make the include dir in the source tree the "main" include path, as
that's where the majority of the headers is. then selectively add the
shadowed dirs.
Change-Id: I03ad13cfcf77175c141b94d41b1221740d851faf
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
rename MODULE_PROFILE_DIR to MODULE_BASE_INDIR.
force MODULE_BASE_OUTDIR to be always the shadow of the above.
rename MODULE_BASE_DIR to MODULE_SYNCQT_DIR (the former is still
recognized for backwards compat with webkit).
the idea behind these changes is making the variable names and override
possibilities reflect their actual use.
Change-Id: Ica4062d7231a0ce13241670e0d0f43e6b1b97160
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
