The change in plugin loading has meant that different plugins in the
same plugin folder will not be handled properly when loaded with
different instances of QFactoryLoader.
A solution is to only unload compatability plugins from
QFactoryLoader::update() since they are the only plugins that are
actually loaded in that method.
This auto test shows the error on the current version of QFactoryLoader
and passes with the fix described above.
Change-Id: I12001525d51bb631d6742c5965357598322f247c
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The libraries were built into wrong directory in Windows. Fixed it so
that the libraries are built into debug and release directories like
the test executable.
Also fixed QMAKE_CLEAN statement, which was using incorrect separator.
Task-number: QTBUG-24151
Change-Id: Iade656af5f83ef2b79c2b9c4177df4a16b2f6821
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
- Changed unload_after_implicit_load() to use full path
- Turned off app_bundle
Change-Id: Ibdf3ae0dc833d97eba64298715eb88c70408fff6
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Marked four tests insignificant due to failures, these need to be
fixed later and then re-enabled:
- tst_qfilesystemwatcher
- tst_qsettings
- tst_qlibrary
- tst_qsharedpointer
- Skipped one invalid case (tst_QCoreApplication::argc())
- Ifdeffed around vsprintf issue in MSVC (tst_QByteArray::qvsnprintf())
Task-number: QTBUG-24157
Task-number: QTBUG-24146
Task-number: QTBUG-24128
Change-Id: I4db957a65fbf0093f5ae3dc1a04d792492818104
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
- Changed unittest to use QCoreApplication::applicationDirPath()
instead of QDir::currentPath().
Change-Id: I398f7ea8b4426be85432d0eb3767ef6d59488d0a
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When using QSignalSpy, always verify that the signal spy is valid. This
will cause the test to give a meaningful failure when spying on a
non-existant signal. Without this change, tests that spy on a signal to
ensure that it is not emitted (i.e. by comparing the spy count to zero)
could pass erroneously if something went wrong when creating the signal
spy, as an invalid QSignalSpy will always return a count of zero.
Change-Id: I41f4a63d9f0de9190a86de237662dc96be802446
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These comments were mostly empty or inaccurate. Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.
Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
In .pro files, removed wince/symbian-specific DEPLOYMENT cases and
replaced them with TESTDATA where appropriate.
In .cpp files, removed SRCDIR and relative paths to testdata and
replaced them with the QFINDTESTDATA macro where appropriate.
Modified test helper apps/libs to install themselves under the test
they relate to.
This change allows corelib tests to be correctly installed, along with
their testdata, via `make install'.
Change-Id: I5e202e2f3b577af7e39072d5c9fe13e0ca125304
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Use QVERIFY2 to include errorString() in the failure message.
Change-Id: Iecb4e7694c3d71bfb786908a6a6c26b187d60c8f
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The removal of plugin cache in qt5 (8ed47d961d)
means that only the original loading error (from QElfParser) is reported.
In Qt4 this was previously two different strings depending on if the library
had been previously cached.
Task-number: QTBUG-22834
Change-Id: I15a4adc7d0f8f23f16bb2aa8ba8b968db770f074
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This is the first change to re-enable the autotests for the individual
qtbase modules. This means adding subdir.CONFIG=no_check_target for each
module (except corelib) in tests/auto/auto.pro instead of in
tests/tests.pro
QFileSystemWatcher, QIODeice, QSettings, QTextStream, QSocketNotifier,
QVariant, QPluginLoader, QLocale: These tests currently fail, which
will block any changes that attempt to re-enable the autotests. Ignore
the failures for now by marking them as insignificant.
QAbstractItemModel: This test currently crashes, which can
destabilize the CI system when attempting to re-enable the autotests.
Skip this test for now by disabling the check target for it.
Change-Id: Ie5147d5c5cfae5e7d0a495d5c4788ce92fe2e6d8
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Use QVERIFY2 so that the test output shows the full error string when it
does not contain the expected sub-string.
Change-Id: I31f91bd5c47c082aacabd2333bc12137bc4d24a6
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Previously, the user had to recompile the test with an additional define
to see the plugin loader error string. By re-ordering the verification
statements, we can ensure that the error string is visible in the test
results whenever its value is not the expected value, thus eliminating
the need for conditional diagnostics.
Change-Id: Iae9ef0b7cbad551fd56f0e0439eaad034f2420e3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed code was already commented-out when it was first added in
2007, and would not form a useful test as it was not followed by any
verification steps. QLibrary::setLoadHints() is tested elsewhere, so
this code can vanish.
Change-Id: I1c4dcaacaf31b0f38136336414cfbe3de1a406f3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test is passing in CI.
Task-number: QTBUG-21402
Change-Id: I356476e458cac1cd434959fdf801011a607c9233
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Use QVERIFY2 to provide better test diagnostics.
Change-Id: I128004f4ee133ceed4d8f373bbbe4a0eee431ebf
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I7c1ffe9c8c294dbdc988e1582e580b1ed3f4593e
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Symbian is not a supported platform for Qt5, so this code is no longer
required.
Change-Id: I1172e6a42d518490e63e9599bf10579df08259aa
Reviewed-on: http://codereview.qt-project.org/5657
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This change disables failing tests to increase the
likelihood that 'make check' terminates with a zero
exit status. This is done to prevent the CI system
from blocking further commits once qtbase#refactor
is merged into qtbase#master.
Failing tests are marked as insignificant (by putting
'CONFIG += insignificant_test' in the .pro file).
Note: This is a temporary measure that needs to be cleaned up
once the refactor->master integration is complete.
Ideally all disabled tests need to be enabled and passing.
All changes will be marked by the string QTBUG-21402 in a comment
for easy location.
Task-number: QTBUG-21402
Change-Id: Ic4400671671f6d9b75b106a6aa4755b20e74378d
Reviewed-on: http://codereview.qt-project.org/4678
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
