For two reasons: 1) those operators are gone and 2) the ones that remain
are atomic.
Task-number: QTBUG-28532
Task-number: QTBUG-24627
Change-Id: I1e9d1b076d923546c1ee3d45f312066590f97416
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Make tst_qquickview::resizemodeitem pass.
Returning on equal geometry breaks for non-top-level
windows.
Change-Id: I3b361655e25b6cf2d5e29410dc1f3567ab8f54d9
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
The crash could happen if a QWidget in the UI got deleted, and
the AT client later tried to access the widget through the cache
(qAccessibleRecentSentEvents()).
Solution: Use a QPointer as a guard.
Task-number: QTBUG-26187
Change-Id: I1aa716766626cf171757e76ba255a6d5ae4fd854
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Manifests must be embedded into DLLs with the resource id 2, not 1.
This fixes a regression introduced in commit c9406bcf.
Task-number: QTBUG-28524
Change-Id: I93b1dfe4614d0535f47fd881b8688a23e83e845f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Ismo Haataja <ismo.haataja@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Task-number: QTBUG-28389
Task-number: QTBUG-28380
Change-Id: I91edd9c8aba60118d722bbf9ad5b85f994398823
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
QWindowsStyle considers QStyle::State_On as pressed, whereas
QMacStyle uses the same state for transient scrollbars. Thus,
to indicate transient scrollbars, QScrollBar::initStyleOption()
must set QStyle::State_On only when the current style actually
supports transient scrollbars.
Task-number: QTBUG-28523
Change-Id: I94d207b1e8c5c4bd6f4b99e8b4f1661197fbe9dd
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Commit 320b16110f changed the arguments
of swprintf to be compliant with latest MinGW-w64 headers: The headers now
excludes the non-standard swprintf(wchar*t,wchar_t*,...) version for C++11.
However, the swprintf(wchar_t*,size_t,wchar_t*,...) version is actually
not supported by e.g. stock Mingw-32 from mingw.org.
Instead, use _snwprintf(wchar_t*,size_t,wchar_t*,...), which both
MSVC, and all MinGW versions should support.
Task-number: QTBUG-28520
Change-Id: Icadd11773a25143e46a72c898adfd1c324f9c468
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
-value copied from qt-project.org
-more room between lines of text and the list at the landing page.
Change-Id: Iee995325ded0c803feca44d112c5e73a024917bb
Reviewed-by: hjk <qthjk@ovi.com>
Since all gui applications already need some QPA plugin added,
we might as well add the default plugin and generate the code
to import the plugins automatically.
User can opt out from the automation by removing relevant
items from CONFIG variable: link_qpa_plugin or import_plugins.
Task-number: QTBUG-28131
Change-Id: Ic171c363464c099143374d3e39bcc28f6edf73d2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
In SHA 51914375b6 the rubberband
selection was fixed, so it followed the scene-point on mousemove.
However wheelEvent could move the view - but avoid update of the
rubberband (that would not be updated until next mouse-move).
This patch fixes that (and generally improves rubberband behavior)
since QGraphicsViewPrivate::mouseMoveEventHandler is called by
replayLastMouseEvent, which is called from various places,
where we need to update the rubberband (e.g scrollContentsBy).
Change-Id: I1b78c27edaaecea797a2319086d7a11d437d2bd3
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This means the xcb plugin library will be named libqxcb.so instead of
libxcb.so, which doesn't clash with the system's libxcb.so. We need to
consistently apply this on all platforms for static linking to work.
Change-Id: I1640a7cae7b9846bbe62b19ab1c2c5bad7d02b4c
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This patch moves the rubberband-handling from QGraphicsView::mouseMoveEvent
to QGraphicsViewPrivate::updateRubberBand. This function is then
called from QGraphicsView::mouseMoveEvent.
I have removed some d-> and added some q-> but beside that
nothing is changed in the code.
Change-Id: Iab70c55635c43733e0e02bb70e2bb03b90bf62f0
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The QPointF ep is not modified. There is no reason it shouldn't
be const.
Change-Id: I41fb8f9ae5296a7a40f7eb8be13fc14d56915e3f
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Even though the code before theoretic is ok, we really shouldn't
have a reference since mapFromScene returns a QPointF and not a
const QPointF&.
Change-Id: I5ea8fd238bdbdd21fb1e3b6b5f280d45e3bc43ef
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
generally, don't install anything from the top-level examples dirs
automatically. the global README and the aggregator examples.pro are
installed explicitly.
Change-Id: I5f6b8760f37d917b800fa85979896a471778cac0
Reviewed-by: hjk <qthjk@ovi.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
it compiles just fine without it.
if this was meant to inject a newer version of JSC than what is in
QtScript, it can be redone without creating a bizarre hybrid.
Change-Id: I61fe60bfa6a9bdb6423e8a7135250e332a5835ec
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the feature was backported to qt 4.8, and people apparently started to
rely on it. it doesn't add too much overhead when not used, so enable it
by default again.
Change-Id: I15890027603ede733347f2c05b36ad1389c649cf
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Nikolai Kosjar <nikolai.kosjar@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
so other modules can actually re-use the code without referencing qtbase
sources.
Change-Id: Id66f07b476e539273dd32455e7642a17d7e5d0ef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this is a compile-only test, and it's not even marked as a testcase in
the autotest system.
Change-Id: I9b48ddad3c8e3e953d0e6fcfa010bab73289bc6f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
There are two ways to register a type: using Q_DECLARE_METATYPE(T) and
using qRegisterMetaType<T>("T"). Doing one thing in one translation
unit and another thing in another TU constitutes an ODR violation,
because the value of QMetaTypeId<T>::Defined will differ in the two
TUs.
By adding the information whether a type was declared with
Q_DECLARE_METATYPE to the typeFlags(), such a use will trigger
the existing binary-incompatibility failure that checks for
equality of the incoming type flags with the stored ones (if any).
I had to encode the type as a defaulted function argument in order
to avoid the linker merging instantiations of the function templates
and therefore rendering the detection moot.
Change-Id: I82017caf300458b411cc8ac2f6653536fac64117
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Add a missing 's' for plural form for signals. This fixes the linking
to Signals topic in class references.
Task-number: QTBUG-28450
Change-Id: Ic666e608b4b5b40b1f886ea581e54227e1a94678
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Manual tests are not supposed to be run by "make check"
Change-Id: I0539b94f5286e89ddad2edf487d4b0d82fc2f374
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Simo Fält <simo.falt@digia.com>
- Moved documentation for the Qt XML, Qt Widgets, Qt Concurrent, and
Qt Network examples from qtdoc.
- Grouped the documentation pages under relevant groups
- Fixed \snippet paths
Task-number: QTBUG-27515
Change-Id: I43c22a679e2eefbb48e3cd5893aa2afd3d905863
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Commit 0696071316 moved away from QDom but
also lost the ability to fill the introspection field of the created
QDBusIntrospection::Interface instances. This commit now generate the
string again as we proceed with the QXmlStreamReader based parsing.
Task-number: QTBUG-26668
Change-Id: I8f406e1f4e9d3e667a8557db69da36cac369ba4f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Revert "Doc: Removing entry in CSS for adding icons to HTTP links"
This reverts commit ceb2799163.
Also:
-edited image to use Qt Project brand colors
-removed breadcrumbs from CSS
Change-Id: I3c2e655f8eac463677b20b68bc2ffa0efd2fd468
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
With the change cff46983a, prepared queries can now store a
named paramater to be used more than once.
When using ?, thus positional binding, there is no named
parameter, thus there is no need to store it.
When prepare is called from a query with ?, it currently
causes an error when the feature QSqlDriver::NamedPlaceholders
is true. Because holders values are called while holders is
actually empty.
QSqlDriver::NamedPlaceholders is true for QOCI plugin only
but the problem is independant of the plugin used.
Adding a test case with a test driver to make the test runnable
without Oracle installed.
Change-Id: I6d7491f7e09a7b62d2d4d216b40fedd67e927e27
Reviewed-by: Matt Newell <newellm@blur.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
OpenSSL changed the layout of X509_STORE_CTX between 0.9 and 1.0
So we have to consider this struct as private implementation, and use
the access functions instead.
This bug would cause certificate verification problems if a different
version of openssl is loaded at runtime to the headers Qt was compiled
against.
Task-number: QTBUG-28343
Change-Id: I47fc24336f7d9c80f08f9c8ba6debc51a5591258
Reviewed-by: Richard J. Moore <rich@kde.org>
Configure will now generate QT_DEFAULT_QPA_PLUGIN qmake variable
to specify the default QPA plugin.
"CONFIG += qpa_default_plugin" statement in application .pro file
will add the default QPA plugin into QTPLUGINS.
"CONFIG += qpa_minimal_plugin" statement in application .pro file
will add the minimal QPA plugin into QTPLUGINS.
Task-number: QTBUG-28131
Change-Id: I12a241005f30b37467d783b50f0369b47e605e68
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Platform plugin is needed always when gui is linked to an application.
This is tedious to do manually for static builds, so provide support
for generating a source file that imports static plugins for
application projects.
"CONFIG += import_plugins" statement in application .pro file will
generate required import statements for all plugins specified with
QTPLUGIN variable.
The plugin class names are found from plugin's module pri generated
automatically when plugin is built, as long as the plugin specifies
the PLUGIN_CLASS_NAME in the plugin .pro file before loading
qt_plugin.prf.
Task-number: QTBUG-28131
Change-Id: I19f8ea48a3c1e9b5c81f4399c4b5d439a6d4bea1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
