Commit 2bc7a40048 taught the CoreText font database to populate the
families lazily, and in the process added a guard to ensure that we
didn't populate internal fonts (prefixed with a '.'), as these fonts
would then show up in font selection dialogs.
Commit 909d3f5c7 then added support for private fonts, by making it
possible to filter out any private fonts from font selection daialogs.
But the guard was not removed, so we were still not populating these
fonts. This guard has been removed, and the filtering function has
been updated to include the conditions of the guard.
Next, commit e5e93345c5 used [UIFont fontNamesForFamilyName:] to verify
that each family that we registered with the font database would also
have matching fonts when finally populated. This is not the right approach,
as [UIFont fontNamesForFamilyName:] does not handle internal fonts.
Instead we trust what CTFontDescriptorCreateMatchingFontDescriptors()
gives us, but make sure to register the resulting font descriptors
with the original/originating font family, instead of the one we pull
out of the font descriptor.
Finally, as of iOS 10, we can use CTFontManagerCopyAvailableFontFamilyNames
instead of [UIFont familyNames], which gives us all of the internal font
families like on macOS, instead of just the user-visible families. For
earlier iOS versions we manually add '.PhoneFallback', as we know it
will be available even if not listed in [UIFont familyNames].
The end result is that we register and populate families like '.PhoneFallback',
which is critical to supporting more esoteric writing systems.
The check in tst_QFont that styles for a given family is not empty has
been removed, as we can't guarantee that on all platforms, which is
also documented for QFontDatabase::styles().
Task-number: QTBUG-45746
Task-number: QTBUG-50624
Change-Id: I04674dcb2bb36b4cdf5646d540c35727ff3daaad
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Window managers typically grab the pointer after receiving
the _NET_WM_MOVERESIZE event. But they fail to do it for
touch sequences which have a receiver. So we should reject
the touch sequence before sending _NET_WM_MOVERESIZE event.
QSizeGrip calls startSystemResize() on MouseButtonPress event
which is synthesized by Qt on TouchBegin. We can find the id
of the touch point by comparing coordinates of the synthesized
MouseButtonPress event with coordinates of all TouchBegin events.
Then we use this id to reject the touch sequence (it's possible
only after receiving XI_TouchUpdate).
Change-Id: I26519840cd221e28b0be7854e4617c9aba4b0817
Task-number: QTBUG-51385
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The prolog and epilog did not force RGB32 to be converted to RGB64 with
alpha fully defined like the middle optimized part.
Change-Id: If7c4829f2239f9a3c524f78b9ce269e2b0b5b150
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
this also removes the need for passing pre-processed options via
configure.cfg, so get rid of that.
a somewhat unfortunate side effect is that the android-style-assets
feature had to move back to the top level, as the licensing options
depend on it.
Started-by: Lars Knoll <lars.knoll@qt.io>
Change-Id: Id4d1e0ba18b3e3104400293b8f0c7f2f65e68dea
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The function was incorrectly handling green and blue color channels
causing them to be dropped. This affects drawing non 32-bit images onto
10-bit per color channels formats such as RGB30.
Change-Id: I9211e253b1a9da0dada5c418d592a8f531265989
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Beside its usage in widgets, mouse grabs are required for QML menus to
work.
Task-number: QTBUG-57079
Change-Id: I306cb68624186da69725470e147bc7b979dac8e4
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Followup to 0484473: this is all new stuff for 5.8 and we don't need
to release it with pre-deprecated functions.
Task-number: QTBUG-54616
Change-Id: If17a4bec6fc36ca78d87517992374f101ae13b4f
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
This re-fixes commit d72ac3f35f, which
simply removed the #define but did so at the wrong place. Instead of
forcing the macro to be removed, let's simply not have it defined in the
first place.
Change-Id: Ie6dbad9bbbd9488887e8fffd148dd67d9a31b32e
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
-[NSMenu itemWithTag:] clearly states that it'll return the first
item with that tag. Furthermore, when and item has been synced more
than once, it could be that more than one such item exists in the
same menu (e.g. lately changing the role of Edit->Copy).
Change-Id: I95a4f0a151659ae273ba03a3cab4a720b781fc3a
Task-number: QTBUG-57404
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This should not happen, but it's clearly not the user's fault.
So we should try to carry on as gracefully as possible instead
of letting Cocoa abort the application.
The patch also factors the repeated calls to QCocoaMenuItem::
nsItem() in QCocoaMenu::insertNative() and improves a warning
from QCocoaMenuIten::sync().
Change-Id: Id00135c219aaf40fb565b19a65cab68f6d9863b2
Task-number: QTBUG-57404
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QHostAddress allowed assignment from a QString, but the respective
constructor is explicit, and rightfully so. So it does not make
sense that the assignment operator is provided, because of the
asymmetry caused between
QHostAddress addr = funcReturningQString(); // ERROR
addr = funcReturningQString(); // OK (until now)
By the same token, since SpecialAddress is implicitly convertible
to QHostAddress, provide the missing assignment operator from that
enum.
Add tests, rewriting the _data() function to use the enum instead
of an int to pass SpecialAddress values, and to test !=, too.
Added setAddress(SpecialAddress), since a) it was missing and
b) to share code between the ctor and the assignment operator.
Change-Id: Ief64c493be13ada8c6968801d9ed083b267fa902
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Several people agreed that the name was confusing and that this one
is better.
Task-number: QTBUG-54616
Change-Id: I31cf057f4bc818332b0551a27d1711599440207c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Sune Vuorela <sune@vuorela.dk>
Changes it to follow standard SIMD patterns so it can use
ALIGNMENT_PROLOGUE_16BYTES and SIMD_EPILOGUE helpers.
Should also improve performance by using aligned memory access.
Change-Id: I14a48b82e3f3de83bd7572aa82bed07f28ad944c
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
Similar to the way datagrams are handled for udp sockets the worker now
takes care of tcp data. Thus we avoid race conditions which stopped data
processing. It could happen that data was read from the socket into the
buffer and before readyRead was emitted the buffer was completely read.
In this case readNotification is set to false and no new data is processed
afterwards.
Additionally the buffer was replaced by a vector of QByteArray. The buffer
kept growing and was never cleared (and there is no obvious way for
clearing the buffer), so that an overflow happened eventually.
pendingReadOperations (and its mutex) could be removed as well. There is
only one situation where they could clash and that's the initial read.
Having two members is preferred over having a list of operations and a
mutex.
Task-number: QTBUG-56438
Change-Id: Idbad58e47785996023748c310530892163f24594
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
We have a 'channel' object connected to a socket with Qt::DirectConnection.
QHttpNetworkConnectionPrivate in its dtor (note, it's a private object destroyed
after its 'q' - QHttpNetworkConnection - was destroyed) calls socket->close()
and this can end up in socket setting an error and emitting (for example, in
QSslSocket::transmit). The slot (QHttpNetworkConnectionChannel::_q_error) will
access the now-dead/non-existing connection then. So disconnect the channel
from the socket early, before closing the socket.
Task-number: QTBUG-54167
Change-Id: I3ed4ba4b00650c3a39e5c1f33aa786e47bfbbc57
Reviewed-by: Konstantin Tokarev <annulen@yandex.ru>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
It doesn't like the access to the template instantiation in the ternary
operator.
error: operand types are incompatible ("FetchPixelFunc" and "<unnamed>")
Intel-Issue-ID: 6000164201
Change-Id: I73fa1e59a4844c43a109fffd148ca452796eebb1
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
That's what happens when you don't test and just rely on an the warning
listing. ICC has two warning numbers for deprecated warnings: one that
matches Q_DECL_DEPRECATED and one for Q_DECL_DEPRECATED_X.
Change-Id: I73fa1e59a4844c43a109fffd148ca7a05eda8f13
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The alpha channel of an RGB32 image was not properly ignored when doing
blending with partial opacity.
Now the alpha value is properly ignored, which is both more correct
and faster. This also makes SSE2 and AVX2 implementations match NEON
which was already doing the right thing (though had dead code for
doing it wrong).
Change-Id: I4613b8d70ed8c2e36ced10baaa7a4a55bd36a940
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Add a QT_QPA_EGLFS_KMS_PLANE_INDEX environment variable that applies
both to the GBM and EGLDevice backends. When set to a value between 0 and
the number of planes on the connector - 1, the chosen overlay plane will
be used for output, meaning there will be a drmModeSetPlane to configure,
and, in case of EGLDevice, the plane's corresponding EGL layer will get
chosen instead of the CRTC's.
Task-number: QTBUG-57386
Change-Id: I12c89472ea5730987052f39211fadc597d1302ef
Reviewed-by: Pasi Petäjäjärvi <pasi.petajajarvi@qt.io>
Add a QT_QPA_EGLFS_KMS_CONNECTOR_INDEX environment variable that applies
both to the GBM and EGLDevice backends. Instead of specifying all
uninteresting outputs as "off" in the config file in QT_QPA_EGLFS_KMS_CONFIG,
this variable provides a shortcut to force one single connector and ignore
all others in embedded systems with a fixed connector configuration. The index
must be between 0 and DRM connector count - 1.
Task-number: QTBUG-57386
Change-Id: I3f9562f48bf6b2ffaf9a0cc232e09a7e0c15645b
Reviewed-by: Pasi Petäjäjärvi <pasi.petajajarvi@qt.io>
Make it possible to identify from the logs that QT_QPA_EGLFS_LAYER_INDEX
was set, in order to help troubleshooting.
Change-Id: Ic22825e5df9f0eeb31f817f398b9f6c000c3a00f
Reviewed-by: Pasi Petäjäjärvi <pasi.petajajarvi@qt.io>
Parent patch introducing usage of this attribute did not add it to
the EGLStream support header. This is likely not fatal, but follow
the practice of defining the constants ourselves, in case they are
not present.
Change-Id: Ib16f9809f9c6a212570c49472bb840183232e68a
Reviewed-by: Pasi Petäjäjärvi <pasi.petajajarvi@qt.io>
If the StatusNotifierWatcher disappears and then appears again, we need
to register our tray icon again with it.
To do this, split the “register with watcher” part into a separate
method, and call it when m_dbusWatcher emits its serviceRegistered()
signal.
Change-Id: Id5fc8ac81b5038a61b678514dabd3eb9c8f1c106
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
- Declare as Q_MOVABLE_TYPE
- Prevent QList<QPointerUniqueId> from being instantiated
(use QVector instead)
- Add equality relational operators
- Add qHash() overload
- Replace non-default ctor with named ctor.
- Add Q_DECL_NOTHROW.
- Add Q_DECL_CONSTEXPR.
- Rename numeric() -> numericId().
- Update docs.
The extension vector for this class calls for additional
properties to be added later, but these are not user-
settable. It thus suffices to rely on the only data
member, a qint64, which can be reinterpreted to an index
into an array or hash with actual objects. This allows
to make the class a Trivial Type (ie. no overhead over
an int) while still supporting later extension. Cf.
QSslEllipticCurve as another example of such a class.
The extension has to maintain the following invariants,
encoded into user code by way of being used in inline
functions:
- m_numericId == -1 <=> !isValid()
This is trivial to support. An extension could not and
still cannot reinterpret the qint64 member as a d-pointer,
but a d-pointer is only necessary for user-settable
properties where updating a central private data structure
would cause too much contention.
Add a test.
Since this type is used in other modules, keep the existing
functions, but mark them as deprecated with the expectation
that these compat functions be removed before 5.8.0 final.
Task-number: QTBUG-54616
Change-Id: Ia3ede0ecaeeef4cd3ffa94a72b1050bd409713a5
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Setting QT_QPA_EGLFS_STREAM_FIFO_LENGTH to a >= 1 value changes from
mailbox to FIFO mode, with the specified length.
[ChangeLog][Platform Specific Changes][Linux] Added an option to switch
from mailbox to FIFO mode in eglfs' EGLStream backend. This is done by
setting the environment variable QT_QPA_EGLFS_STREAM_FIFO_LENGTH to a
>= 1 value, the desired length of the FIFO queue.
Change-Id: Ib98e2ff805f8c00ca2e224d1db5b9c1b2c9a04f0
Done-with: Pasi Petajajarvi <pasi.petajajarvi@theqtcompany.com>
Reviewed-by: Pasi Petäjäjärvi <pasi.petajajarvi@qt.io>
Do not create QByteArray from const char* to compare with other
QByteArray, because there is an overloaded operator==.
So avoid needless allocations.
Reorder condition, because isEmpty() method is cheaper than
string compare.
Change-Id: I8d2c8a0fb247528d9ce485007431167372d62bff
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This static method was introduced in
8758f532ae
and was unused even then.
Change-Id: Id0d409b7fade977bbbabfcdee0c432b7058f8ace
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
We can use 'override' directly since Qt 5.7.
Also remove redundant 'virtual' keywords.
Change-Id: Ia40be0e1e60e51f9d043ab575fd6b9305ea620b0
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
We parse the EXIF header in order to get the proper orientation, so
let's be a bit more careful in what we accept. This patch adds better
handling for reading past the end of the stream, plus it limits the
number of IFDs read (to avoid processing too much data) and deals with a
pathological case of the EXIF file format: EXIF (due to its TIFF
origins) permits the offset to the next IFD to be backwards in the file,
which means it could result in a loop or pointing to plain corrupt data.
We disallow any backwards pointers, since it seems that's what other
decoders do (libexif, for example).
Change-Id: Iaeecaffe26af4535b416fffd1489332db92e3888
(cherry picked from 5.6 commit 02150649f95b8f46f826e6e002be3fa0b6d009bc)
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Fixes: warning: implicit conversion from 'float' to 'double' to match
other operand of binary expression [-Wdouble-promotion]
Task-number: QTBUG-57068
Change-Id: I897a341aca83873bc6abd256a82a3b9f09409833
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The installation uses SDK 8.1 which does not have the required
include files. Add a check depending on NTDDI_VERSION.
Change-Id: I6323496aed2a2d6e22d41ec14bdf8c6cf1bf2f31
Reviewed-by: Konstantin Tokarev <annulen@yandex.ru>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Don't block the event that Qt depends on to close popups.
Task-number: QTBUG-57292
Change-Id: Ida1f928b81868f68a7b1e19cd0b83485d2a7232e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We can use 'override' keyword directly since Qt 5.7.
Change-Id: I31127478a0a96798a4e018d9996842204e307552
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
And get rid of related DEFINES in the pri file
Change-Id: I54cf25b7cb447af22b410213759044e8018939a6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
After all the check makes sense here. If a timer was removed as a result
of sendEvent and it was not at the end of the list the list is not
shrunk but the timer info's id is just set to INVALID_TIMER_ID.
Additionally the timer's object should be fetched before we unlock the
locker as timerIdToObject is changed in removeTimer and we might access
a nullptr if the timer has been removed.
Reverts c83ba01f7b
Task-number: QTBUG-56756
Change-Id: Ib1a04c02fbfcf4c939b4891d42f954dc9e87149e
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
This class is just a record with a bit of functionality on it.
To prevent pessimizing it compared to a C struct with the same
contents, mark all operations constexpr and remove the point-
less copy ctor (the generated one is just fine).
Converge on passing QRect, QSize, QPoint by value. Was mixed
cref and value passing before.
Saves ~1KiB each in text and data size on an UBSan build,
somewhat less, of course, on a normal one.
Change-Id: Ibae16792d822ff183a0c542380501978f2108d93
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Bound x and y to the clipping rect instead of the texture rect.
This has minor effects on lancelot, but all within the 5% fuzz.
Change-Id: Ia6141e4f7649dad53211bd959af1bce48372e26d
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Change-Id: Idb6216a645f7c9791674d16665331a63da46b132
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: James McDonnell <jmcdonnell@blackberry.com>
Turn styles into proper features and test for them
using qtConfig/QT_CONFIG.
Change-Id: I7e28785a46723364b90d8aa286f4d6e5ab085651
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Turn them into proper private features, and remove setting of
defines in the pri file.
Change-Id: Iafc11e93d4a9349bf15971dc1adac9a828ea03f6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
It was phrased for an out-of-date version of Qt.
Adapt phrasing to be future-proof. Reflow text.
Change-Id: Ic026a7719ba6fb1de2830358a75cd6f30c5f8897
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The check for 8x zoom was inverted and checked for 1/8x zoom.
Change-Id: I45156db709bab6b702769c2a70d4d2af51b5533a
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
... if sync() has already been called manually.
Change-Id: I11bd6810aa3c1065a72ffaa2001d1bdbf8bf9c89
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make it possible to identify its warnings in log files, like:
qdbusxml2cpp: Got unknown type `(s)' processing '../org.qtproject.QtDBus.Pinger.xml'
You should add <annotation name="org.qtproject.QtDBus.QtTypeName.Out0" value="<type>"/> to the XML description
qdbusxml2cpp: Got unknown type `(s)' processing '../org.qtproject.QtDBus.Pinger.xml'
You should add <annotation name="org.qtproject.QtDBus.QtTypeName.Out0" value="<type>"/> to the XML description
Change-Id: I242d9316b317de0164af2725b7836551f2f69037
Reviewed-by: Rolf Eike Beer <eb@emlix.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add parentheses after function names, replace
is different -> differs
Change-Id: I6332db1d1650ed8d8320c5f20cd79d0bf1870e27
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
As _BitScanForward and friends are not marked constexpr in Visual Studio,
functions using these may not be marked either.
Task-number: QTBUG-57086
Change-Id: I29cfa4459580b5740f1011e7f39309844518ce03
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
Code generated by moc very often calls deprecated functions, like
deprecated slots, signals and property getters and setters. There's no
way around that unless the class in question is willing to break binary
compatibility, so those warnings are actually harmless.
Change-Id: Iaeecaffe26af4535b416fffd1489d1a98ef8b34a
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This is the only warning we disable in a lot of places in Qt 5.8 source
code. If other warnings become common, we can add macros for them too.
Change-Id: Iaeecaffe26af4535b416fffd1489d1968e29c52a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The user can call qSetMessagePattern after program start, so we need to
be sure that the parsed argument data is properly cleared.
Task-number: QTBUG-57144
Change-Id: I1978c6b95bd84639a8c4fffd1487429b04725522
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Qt5Config restricts search paths of Qt components to ${_qt5_install_prefix}
to prevent accidentally using system Qt modules in case of restricted Qt
configuration. However this does not work properly when Qt is used without
installation, in particular when building cmake-based QtWebKit as a Qt
submodule, because ${_qt5_install_prefix} resolves to QtBase and does not
contain components from other modules.
This patch changes search path from ${_qt5_install_prefix} to all qt5
subdirectories.
Change-Id: Icf01a256097710889573ad69d847b9c3bffa1449
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
They should be enabled/disabled through the configuration system.
Remove some unused defines, and move one define from qglobal.h to
a proper feature definition in Qt Gui.
Change-Id: Ie8d5bff9712ba745af60b42ceca3f0440bed2706
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Short-cut the case-insensitive string comparison when lengths doesn't
match.
This reduces the time spend in ucstricmp from 8% during start-up of the
textedit example, to under 1%.
Change-Id: Ib3a92900b330453289ec9eff4830dfac6a9a5da2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of doing the conversion from the big-endian data by hand, let's
use the convenience functions from qendian.h.
Change-Id: If3966ca94428afabb1f5c922967fb9970f976622
Reviewed-by: hjk <hjk@qt.io>
Shuffled its parts to make clear which bits are public, private and
protected. QDateTimeEditPrivate makes rather heavy use of the last.
Change-Id: Ic5f9d0c5cc85f02e57d3f31e9ac31a17428c5311
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
If it fails, we get NULL back but haven't free()d the old pointer;
saving the NULL return over the old pointer forgets it, leaking the
memory it pointed to. This is particularly severe in the JSON
parser's grow(), where reading a very large JSON document can lead to
the last successful realloc() in a doubling pattern being very large
indeed; the subsequent failure will leak this very last allocation.
Only worth checking for, however, when the subsequent code takes care
to handle failure: in most cases, if realloc() fails, we're about to
crash anyway.
Change-Id: Icd3a503f169be224f0a058c58e8b7c82a3241ae7
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Text that should simply have been naming days of the week used
Qt::Sunday rather than the simple day name.
Change-Id: I64a3cdacd854c1c9c0fbf2d11826555086d674f4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We have:
...
auto networkSession = getNetworkSession();
...
getNetworkSession() can return non-null pointer even if
networkSessionStrongRef is null:
...
if (networkSessionStrongRef)
return networkSessionStrongRef;
return networkSessionWeakRef.toStrongRef();
....
We check the result:
if (networkSession) {
// here we disconnect signals
}
But we should use the same networkSession when disconnecting,
not start using networkSessionStrongRef suddenly, since it can
be null.
Task-number: QTBUG-57110
Change-Id: I96babb42c2182e741e6eabaf7d1abb88869861f4
Reviewed-by: Jesus Fernandez <jesus.fernandez@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
SHGetSpecialFolderPath is declared 'unsupported' by Microsoft, and has
problems with non-ASCII characters. Replace it by the newer
SHGetKnownFolderPath.
Task-number: QTBUG-50570
Change-Id: I8b2dfa10fa5dc30e6c3be094a2ba8d7c3504f2ca
GPush-Base: 4d181bd93234a3747b520d10417825a0147bfeb1
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Sending key events in addition causes applications to respond
twice to for example the back / forward extra mouse buttons.
Suppress the keypress by checking on the device. This is in
line with the other platforms, which do not send keypresses
either.
Native event filters will still be able to listen for
WM_APPCOMMAND.
Task-number: QTBUG-48117
Task-number: QTBUG-57198
Change-Id: I219e17244087663f06ab2c5a8cf4b880c3655700
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
qdrawhelper.cpp is now compiled without PCH, and changes
blocked by the ICE can be reinstated.
This reverts commit cd9de59177.
Task-number: QTBUG-56817
Change-Id: I8d674768d16b3705598bfe5d08ed98376c97a478
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The code is dead, as the codec is never used on macOS.
Change-Id: I86138f1c95e5564256b4d592f0044e83658def93
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Turn iconv off if ICU is being used (in line with codecs.pri)
and get rid of the DEFINES += GNU_LIBICONV in the pri file.
Change-Id: I6fbca975498adbb3e67f913ae9b1dd5cc53ee8da
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Looks up the canonical names of enumerated fonts and register them under
their preferred names if present.
Also changes the logic handling registration of english aliases, so it
is always done, even if it might in rare cases cause a double
registration since that is safe.
Task-number: QTBUG-53458
Change-Id: Ia010774b26072192b55697b717cc37442c852881
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This is now documented in the qt_attribution.json file added in commit
41a7d74385 .
Change-Id: I4f13397a14de7d9f98ba146cabf64dafac5dada4
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Place ANGLE at the start of the title, so that the different entries
are sorted correctly.
Change-Id: I11e9d25874f06450a3d9049b5f5c94aa53621e08
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Bring the copyright lines in the license and the one's
in the metadata into line by using the ones from forkfd.c.
Also bring back description of forkfd from 5.6 documentation.
Change-Id: I423ee8d5d1e1c866a34c346f78520d33ea099b5e
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Write down which files are under CC0, and which under BSD.
Change-Id: Ifdbfa3393b2a0f0d857e6c569bd105426c0719cb
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Windows CE is not supported since 5.6. No need to have checks anymore.
Change-Id: I384bd67e04dec06e83ee69b4ef5dc7dd97888c14
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
For WinRT QPrinter and co are disabled in the new configure system.
Still, we need to have printsupport enabled as a module, providing
no printer.
Task-number: QTBUG-56321
Change-Id: I95ce538e8f54073832af551ccf7f981e877a3b25
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Windows Information Protection is used for splitting corporate and
personal data, requiring connections to be established in a different
way instantiating ThreadNetworkContext.
Usage is enabled via the QT_WINRT_USE_THREAD_NETWORK_CONTEXT environment
variable.
Change-Id: I3aaa097b66fc616d42cd05a1e20bbcb004f6e467
Reviewed-by: James Tong
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The prior test deemed there to be narrowing if source and destination
integral-or-enum types didn't have the same signedness; but all values
of an unsigned source type can be represented in a larger signed
destination type, so there is no narrowing in this case.
Updated QObject test-case to match.
Change-Id: I517a5997adcad70e185d7469a8d26788e463cb75
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
In a case like the SVG iconengine there is no available sizes
implementation. However in that case we don't need to provide different
sizes as we can have SVG scale it for us to the one requested. So it is
assumed that with no available sizes implementation that the icon
engine will take care of this for us.
This ensures that SVG files can be used as icons inside the menu on
macOS.
Task-number: QTBUG-40225
Task-number: QTBUG-55932
Change-Id: If01ca582c4c07834e6de16652924e0b7e118c87c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
remove(int, int) with O(N) was used in a loop.
We had a quadratic complexity.
Use erase-remove idiom to fix it.
Change-Id: I643a2a75619ec5ea2bf99e48a25f64a7f69ba156
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Flushing all events to ensure that the expose (or other queued events) get
processed right away is dangerous. Instead, pass ExcludeUserInputEvents like
many other platform plugins do. This way queued input events do not get
processed at an unexpected point in time and so do not interfere with modal
dialogs for instance.
Task-number: QTBUG-57229
Change-Id: I9da09e62627d26485fb5a37fc190cb4a4bcb28b6
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Add new file for dynamically loading Window 10 Helpers via combase.dll
and add function qt_windowsIsTabletMode() querying
UIViewSettings::get_UserInteractionMode() for "Touch" mode.
The style hint QPlatformIntegration::ShowIsMaximized will then
reflect the tablet mode setting.
Task-number: QTBUG-56831
Change-Id: Ia361dd172fcf0e54fdfc70863c43527f3ea72fe2
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
By templating on the <chrono> types and unconditionally using
duration_cast to coerce the duration into a milliseconds, we
allowed code such as
mutex.try_lock_for(10us)
to compile, which is misleading, since it's actually a zero-
timeout try_lock().
Feedback from the std-discussions mailing list is that the
wait_for functions should wait for _at least_ the duration
given, because that is the natural direction of variance
(tasks becoming ready to run might not get a CPU immediately,
causing delays), while an interface that documents to wait
_no more_ than the given duration is promising something it
cannot fulfill.
Fix by converting the given duration to the smallest number
of milliseconds not less than the original duration. If that
is not representable in an int, use INT_MAX, emulating the
effect of a spurious wakeup, which are allowed to happen if
the function returns false in that case.
In the above example, the try_lock_for call is now equivalent
to
mutex.tryLock(1);
The tryLock() docs state that the actual waiting time does
not exceed the given milliseconds, but fixing that is a
separate issue.
Change-Id: Id4cbbea0ecc6fd2f94bb5aef28a1658be3728e52
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Found by ASan when it should have been found by me in the initial
review...
The old code did, in this order:
1. delete item->layout() (which deletes item, as QLayoutItem::layout()
is just a dynamic_cast implemented with virtual functions)
2. delete item->widget() (which is correct, but too late, as 'item'
may have already been deleted; this is the first use-after-free
bug)
3. delete item->spacerItem() (which is the second use-after-free).
Fix by deleting item->widget() (which may be a no-op), _then_ checking
for a QLayout, deleting all children (but not the layout), and finally
deleting item as a QLayoutItem.
Rename clearQLayoutItem() to clearAndDestroyQLayoutItem() to better
match what it actually does.
Change-Id: Id70a7a137dac5de466ef619f01bfd61dfc150418
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Samuel Gaist <samuel.gaist@edeltech.ch>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The previous documentation said:
"On OS X, the string returned resembles the sequence that is shown in
the menu bar."
That was not completely true because the string returned depends on the
format passed to the function.
Task-number: QTWEBSITE-744
Change-Id: I1b7d9367547326670d1b3a8cfe48f066910f5a10
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
We first hide identifier 'hr' and then later we check the one that was never
correctly initialized.
Task-number: QTBUG-57226
Change-Id: Ibbf1bb99aa752c2e4090caf4533dc5f5b71b5e41
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The time stamp is added at the end of the node information and
consequently this also bumps the version.
Task-number: QTBUG-57182
Change-Id: Ia10e006f28c0b168b2bcd74ed8b7098f84d10af3
Reviewed-by: hjk <hjk@qt.io>
Introduce helper functions switch_{on,off,from_to} to make
the code more readable, and prepare everything for later
optimizations reducing the sizes of critical sections (by
locking the mutex later, or even never).
This commit, however, is only concerned with shutting up
tsan.
In waitForResult(), simplified the code by removing an
unneeded if guard: the condition is checked in the while
loop immediately following in the then-block, and the
local variable declaration that precedes the loop is not
worth guarding.
Change-Id: I24bfd864ca96f862302536ad8662065e6f366fa8
Reviewed-by: David Faure <david.faure@kdab.com>
Add commercial licenses as an alternative to BSD for code that
is statically linked into applications by default. BSD requires
attribution even for commercial customers, which is not intended.
This is a manual backport of parts of change 71404b0be1 in 5.7,
and should be dropped when merging to 5.7.
[ChangeLog][License Changes] Static libraries that are linked
into executables (winmain and qopenglextensions) are
now licensed under BSD _and_ commercial licenses.
Change-Id: I0d33bc09c06548d63b11a39027e9bb12c1b9a915
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The outer scope it was in had a later clause with its own pos
variable.
Change-Id: I8d083d3d5935416ef82a78890ed145f02d6d6ded
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QModelIndex is not safe to be used to store an index as it is designed
to be discarded right after use as the index information can change.
Therefore a QPersistentModelIndex should be used instead to store the
index. Subsequently the m_index does not need to be updated whenever
the model changes anymore as this is already done for us.
Task-number: QTBUG-49907
Change-Id: Icc93e410de2821c503ea15a7a1dd9ae32634914e
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Even QByteArray::fromRawData() allocates memory.
Instead of QByteArray::contains() and indexOf(), use good ol'
strstr(), like already done elsewhere in the same function.
Apart from the memory allocations saved, this fixes a Coverity error
complaining that indexOf() can return -1. It's a false positive on the
first occurrence, because we didn't call that function unless we know
there is a "0x" in the string, but the second _was_ wrong, because we
applied it on a new buffer, with unknown content.
Coverity-Id: 11262
Change-Id: I18f352c5576e24f89a5c3ef7f2f1b2176f2a235d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Easy to miss otherwise and hasAcceptableInput() already references setValidator().
Change-Id: Id2d63050db670ab8f7150d7f76492664751cd2da
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This will be used in QtQuick to avoid costly string manipulation (which in turn
involves memory allocations).
Change-Id: I51a67a4cd97cc576f399483c9c0c13da1e1c6e72
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
When a menu item's enabled state changes after
-[QCocoaMenuDelegate menuWillOpen:] is invoked, i.e.,
during or after QMenu::aboutToShow() is emitted, that
state change may not be taken into account. This is
because the automatic menu validation, upon which Qt
relies, is not made aware of any such change.
By calling -[NSMenu update] when syncing the QPA menu
item, we induce Cocoa to invoke -[QCocoaMenuDelegate
validateMenuItem:] and ensure that previously synced
items, whose state may have changed, will be properly
updated. This, however, has a small side effect, namely
that menu-holding items will also go through the automatic
menu enabling path and may appear disabled since, until
now, they were not properly configured. In order to solve
this, we set the action on those items as well, and make
sure that both of QCocoaMenuDelegate's relevant methods,
validateMenuItem: and itemFired:, properly process
menu-holding items.
Menurama manual test updated accordingly.
Change-Id: I62f955538b8be09b8494ea0ce87fca7910148d38
Task-number: QTBUG-56850
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
That loop could never have worked properly.
Identified by analyze compile switch.
Change-Id: I5e987dc9f5c57d3ffbcf054b7b417b506c02e7e1
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The documentation for the qtmain license is right now pretty hidden.
The library is added by qmake independent of the Qt module that are
linked to, but it seems safe to assume people at least link against
Qt Core.
Change-Id: Id474990edde45feab6727bada2bc6a28946216cd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Since virtually all the logic is shared between QNSColorPanelDelegate
and QNSFontPanelDelegate, we extract the added buttons and
layouting logic and move it into its own class. This requires
the two afore mentioned Objective C classes to satisfy the
QNSPanelDelegate protocol.
Change-Id: Ie26e758f5db71920896d930a4f3644b51a1ce3fa
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
swap the branches for (not) reading from qt.conf, and use a state
variable instead of an 'else' for mutual exclusion. this is somewhat
more self-documenting, and allows for a saner handling of the mkspec
fallbacks (which really should have been in a separate [QMake] section
along with Host* and Sysroot, but changing that now is way too much
hassle downstream).
Change-Id: I80a73294022fd1e8d84fe501b737c4fc7758662f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
60985aa42 converted the QT_CONFIG use, not taking into account that the
feature isn't actually known to the configure system - it's coming
directly from the makespec. so revert that hunk (until we have a better
integration between makespecs and configure).
Task-number: QTBUG-57039
Change-Id: Iaf57b5f5339250055f1c378e091da3ab3fcd4292
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
When including a CSS file in a HTML file sent to QTextDocument, and the
CSS file starts with «@charset "UTF-8";», which is the correct way of
declaring that, the parsing fails.
If you omit the space, like «@charset"UTF-8";» the parsing succeeds,
which is wrong.
Fix this by expecting and swallowing whitespace after the @charset
tokens.
Task-number: QTBUG-54829
Change-Id: I32044e8d24bda70c1eb06bf74af50d4cabe2211d
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The buffer is fed into strstr() on the next loop iteration, but
strstr() expects a NUL-terminated string.
In the equivalent code some lines up, the buffer is explicitly
terminated, and we never write the last character of the buffer again,
so we'll not fall off the end of the buffer, but if we read less bytes
than in the last line, we'll parse garbage from the previous line.
Change-Id: I354e1ce1dea71188942305190500b4778a69b4ff
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
