Modularized example paths are defined in module-specific .qdocconf
files. This change fixes \example command for a number of examples to
be relative to those paths. This way, the manifest files will have a
correct project path for each example.
Change-Id: I6d3dba34a1eb04a2bc294520102e232ccd0f0ba2
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Add an 'isHighlighted' attribute to selected examples to bring them
to the top on Qt Creator Welcome mode/Examples tab.
Task-number: QTBUG-29354
Change-Id: I6c72c11f1f8359d889649ff5b7f91e5c4de583bd
Reviewed-by: Thomas Hartmann <Thomas.Hartmann@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
There is no longer any difference in install directories between demos
and examples (QT_INSTALL_DEMOS is obsolete and points to the same dir
as QT_INSTALL_EXAMPLES for compatibility). This change removes any
special handling of demos' paths used in manifest xml, enabling the
demos to be visible in Creator welcome mode as well.
Change-Id: I5afdf578a42d001fab05979d3ea1102fd52b51da
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Thomas Hartmann <Thomas.Hartmann@digia.com>
In Qt 5, I managed to break the guarantee that a deserialised local
datetime is the same time of day (potentially different UTC time),
regardless of which timezone it was serialised in. This happened after
I fixed QTBUG-4057 with If650e7960dca7b6ab44b8233410a6369c41df73a,
which serialised datetimes as UTC.
This patch reverts QDateTime serialisation to pre-Qt 5 behaviour to
restore the guarantee and consequently re-opens QTBUG-4057.
Change-Id: Iea877f7ed886f530b928067789b53534e89fe8cb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Necessary to make QWindow::fromWinId() work on Mac.
Change-Id: I0dc3a1b0d63cff61d484693aee711dc54fea6b2f
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
The warning causes a test failure since it occurs with XCB.
Introduced by enabling frame strut events for all widgets
by f2fcf75381 .
Task-number: QTBUG-30530
Task-number: QTBUG-29012
Change-Id: I025b55f5198a270072b33cae033221709db256aa
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
If tabFocusFirst is not cleared or set to another valid item,
there will be crash later if the removed item is deleted after
removal.
Task-number: QTBUG-30923
Change-Id: Iba9a6ce9334c52f8e552b0accda95ebb5fcfcdb1
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
config.cpp:313:9: error: variable ‘high’ set but not used [-Werror=unused-but-set-variable]
Change-Id: Iacb3cc0f395a3dad7afda1dca167ed8440ac6226
Reviewed-by: Martin Smith <martin.smith@digia.com>
The custom printf formatter Qt ships supports e.g. %lld, which is part
of gnu_printf, but not ms_printf. This fixes a lot of MinGW warnings.
Change-Id: Iff600f20ac23ecb88c4b569d2e668f5d4af6ef27
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
qWarning now depends on QT_MESSAGE_PATTERN, depending on that variable.
It will show things like the moc process id or the Parser::error
function name. We don't want that.
Change-Id: I5b35401200f0f7de2442aa77d700a82402081489
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
The current implementation kept a list of TouchPoints that
was reused when sending active touces to QPA. This list was
never cleaned up, so if you pressed three fingers, and released
one, we would still continue to sendt three touches to QPA.
Especially, since this list was not cleaned up when receiving
a touch cancel, mouse events sometimes stopped working when trigging
a system gesture (like a four finger swipe). This can be seen by
using the fingerpaint example.
Since we cannot rely on TouchPoints having IDs that corresponds to
their index in the touch point list, it ends up being
simpler (and results in less code) to rewrite the implementation to use
a hash table of UITouch to TouchPoints instead.
Change-Id: I5b32f57a8d72a0b8759a64ac7cdfa6700109d2b3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
QWidgetWindow will always redirect mouse events to the active popup
(if any). The same logic is not implemented for touch events, which
means that touch events are always delivered to the widget under the
finger.
It is therefore possible to interact with widgets that are modally
shaddowed by the popup. It is also not possible to close popups
without touching them directly.
This patch will ignore touch events when a popup is active, and
as such, force a synthesised mouse event to be sent instead.
Implementing proper touch support also for popups is out of scope for
widgets.
Change-Id: I023c09c3e1fd4e5495df990c11419c69ecafb8f9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
The current documentation is not terribly clear on this topic, and there's a
couple of posts on various forums where people want to do this. In fact, the old
wording suggested (at least to me) that it is OK to explicitly override a
disabled state, which is apparently not true.
Change-Id: I10c54e0089e9ba5d16958aea62df27feafdf7b3d
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
The underlying rename() of the operating system simply does
nothing when renaming 'foo' to 'Foo' in a case insensitive file
system. Work around by moving in 2 steps.
Change-Id: Ibc73724bfca402a5ce7fcf2a83e8fea32ff71093
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It makes more sense to keep this workaround header together with the other
libxkbcommon files for a better access point since it's used by several *.pro
files.
Change-Id: I63d4eb58f6e7f3852834e41c4b6e058a2c962233
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
To have a properly working key input in the xcb plugin in the case when
xcb-xkb library is not available we can update the xkb_state struct with the
keyboard state information available in the X11 core events.
The current modifier state is reported to clients in a number of core
protocol events and can be determined using the QueryPointer request.
This is how it is done in Weston, Wayland's reference implementation.
Note: In case the X server doesn't have a xkb support on it (which is very
unlikely), then xkbcommon will only pick up the user's primary layout.
The X server with the xkb support stuffs unused bits (13 and 14) of 'state' in the
core events with the effective keyboard group, which we can use to determine layout
changes.
Change-Id: I9f1ef635109870e7412ef1157ca592f3c8f9271c
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
This is required for a modifier+key shortcut support.
Also fixes old Qt bug when keymap group changes were not handled
properly for shortcut functionality.
Task-number: QTBUG-26902
Task-number: QTBUG-4845
Change-Id: I04d2c2ad7049df7420999816154605848fa670e1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
libxkbcommon is a keymap compiler [1] which utilizes xkb
keyboard configuration database [2].
xkbcommon simplifies keyboard state handling by providing xkb_state
object which holds the current state of all modifiers, groups, LEDs,
etc, relating to the provided keymap.
Detecting modifier mapping should become simpler once it gets supported
in libxkbcommon. Also with xinput2 we could get rid of the XkbStateNotify
events, because xinput2 key press/release already include all the mod/group
info.
[1] http://xkbcommon.org/
[2] http://www.freedesktop.org/wiki/Software/XKeyboardConfig
This patch:
- Removes a dependency to -lxcb-keysyms
- Removes a dependency to XLib call - XLookupString
- Enables required functionality to fix QTBUG-27681
Task-number: QTBUG-27680
Change-Id: I10e10f873821ee02f6df72238e215a541150f38f
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
1) -qt-xcb
a) Use xkb from the 3rd party libs. As it is done for the other xcb
dependencies when qt configure with -qt-xcb.
2) -system-xcb (default)
a) If xkb found then use xkb from the system. (Currenly xkb is not
enabled by default when configuring libxcb library).
b) If xkb can't be found on the system then keyboard state will be
updated from X11 core events.
Change-Id: I7c3dbce6daa2cec52067cd5af80f19040233a0db
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
This library is required by the XCB platform plugin. As we depend on
very recent version of this library and it might not be available
in base repositories of distributions, users can use -qt-xkbcommom
switch to build Qt with the bundled version.
Change-Id: I0ed2a5cc2f1df98b0e7cc926cabfa69818674e08
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Similar to what change a298216bb4 does for update(QRect) we clip
the update region against the widget's rect and return if it's empty.
Otherwise we risk ending up with update rects that are larger than
INT_MAX due to multiple update rects being merged.
Task-number: QTBUG-30876
Change-Id: Idf695b1fdca50449a1e5ddf37500653de290590c
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Set up for downloading from the qt-project.org servers instead
of KDE servers.
Change-Id: I6f9e69f91ea956165300d75109e1683d0b1aa5f0
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
We have to use the 4.4.3 compiler toolchain for producing binaries
for ARMv5 on Android, since the 4.7 toolchain has a regression for
this architecture. The regression has been fixed, but the fix has
not been released yet, so until it has, we need to use the 4.4.3.
However, the 4.4.3 toolchain has a different bug, which breaks
compilation in qtimageformats with a message about redefinition of
uint. This works around that bug for Android builds. When the
patched compiler has been released, we can revert this.
Task-number: QTBUG-30921
Change-Id: I620c186c6e932413a4de1dd331fbf4b9401f2e72
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Change-Id: Ida382a80dba882bbeb920756adc0c16321efe37e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I98145fb3149dd8f7aba60d305da98c148aa9c705
Reviewed-by: Volker Krause <volker.krause@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Fix C4267 MSVC warning.
Make sepSize an int, because this function is never called with a size_t.
Change-Id: I2b834fe7c1408e34d55d9f137231e2f5816f3f1d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The compiler defines _WIN32 for x86 builds.
The compiler defines _WIN32 and _WIN64 for x86_64 builds.
For consistency, the same should happen to the user defined macros
without underscore. The WIN32 macro is added in the win32-* mkspecs.
Task-number: QTBUG-30223
Change-Id: I342afed731f4ba253a2708b98f575039a04613d7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
/RTCsu and /RTCus must be handled as full runtime check options.
Task-number: QTBUG-30711
Change-Id: I783bf49f2ab1d4fd9636dca8e434bccb54844c8c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The vcxproj format supports the /we compiler switch as
TreatSpecificWarningsAsErrors tag.
Support for this switch got lost during refactoring of the
vc(x)proj generators for Qt 4.8.0.
Task-number: QTBUG-29098
Change-Id: I607e907dcb9c1bc7d261053b6d757941ec7db822
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
If a process dies before all output is read into the internal buffer
of QProcess, we might lose data. Therefore we must drain the output
pipes like we already do in the synchronous wait functions.
Task-number: QTBUG-30843
Change-Id: I8bbc5265275c9ebd33218ba600267ae87d93ed61
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
