When writeDatagram is called without first binding the UDP socket,
then bind it as QHostAddress::Any.
This allows the same socket to be used to sent to both IPv4 and
IPv6 destination addresses.
Allowing the OS to autobind the socket inside sendTo() may
result in a single protocol socket.
Task-number: QTBUG-5275
Change-Id: I2b76507e8a8a38369c6eafb61ce4191d1d6cc930
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
The DNS server can legitimately include NS and A records for
the authoritative name server in addition to the DNS records
that were requested.
These are now ignored when checking the reply (we only check
results that match the query, rather than failing if a result
is for a different host name than the query).
Task-number: QTBUG-24698
Change-Id: I327f31d58cdca50c7df6b32b275d7f28b56405f0
Reviewed-by: Jeremy Lainé <jeremy.laine@m4x.org>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
This is unfortunately still "most of them", because of QTBUG-24451
however some of the unit tests are still possible to test stably.
Also skipped test cases which would hang forever due to QTBUG-24451.
Bearer tests are not run, because they pass when test machine has no
wireless LAN, but fail or hang if it does (QTBUG-24503)
Change-Id: Icf99d45707102d2ef9219ed0b5ad521605716219
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Rather than requiring specific hardcoded proxies in the system,
it now checks the proxies returned by the system have the required
capabilities for the request.
Note the test will pass if no proxy is configured (as
QNetworkProxy::NoProxy has all required capabilities)
The test prints the returned proxy lists and elapsed time
diagnostic for manual comparison and debugging.
Change-Id: I621ef4d1d7264a98c3e8bd485c30bc1166fcbdf0
Task-number: QTBUG-19454
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's unstable on all platforms, because the reply can be finished
due to a race with the http thread. It isn't crashing (which the
test was trying to test for), but rather the QVERIFY(!reply->isFinished())
fails, which is an inconclusive verdict.
Change-Id: Ib815a7cedd220544a0c9cb83023e3334df4a0fb3
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
The metatypes are registered in the constructor, don't need to
register them in test cases as well.
Registering in a test case is bad practice, as it could result
in tests failing when run individually due to unknown metatype.
Change-Id: Ic4d65d0f5fe3cdd3ab57cf2512a4906d71205a05
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
The test case that depends on QLocalSocket consistently fails due
to bugs in QLocalSocket windows implementation
Change-Id: Ibfe9eb3590be4f72b52f14cd4fbe5be61f6cf70e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
The test was testing the wrong thing, and passing even though
QNetworkRequest::AuthenticationReuseAttribute was not being
respected, until recently when I fixed username/password in URLs
Now the cache is properly bypassed when this attribute is set to
manual, and the autotest is updated to check this.
Change-Id: I87943515562d0b16b03504f0758ba265758d1c22
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Expiration date is calculated from max-age header when a response is
inserted into the cache. Because the test case is prepopulating the
cache outside of QNAM's control, the expiration date was uninitialised,
causing the test to fail.
This is due to a 2 year old change in QNAM, where max age calculation was
removed from cache retrieval, and more recent changes to QDateTime
where secsTo() returns 0 if one of the arguments is invalid.
Change-Id: Ieecd46123dde4ca0fd0be3ae79e70e1528ec02bc
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
QSslCertificate can be copied around into multiple threads,
without detaching. For example, the https worker threads inside
QNetworkAccessManager.
There are const methods, which lazily initialise members of
the private class without detaching (i.e. caching results of
expensive function calls)
These functions now lock the d pointer using QMutexPool to
avoid concurrency related crashes.
autotest crashes 20% of the time in release builds without
the fix, passes 100 times in a row with the fix.
Task-number: QTBUG-20452
Change-Id: I64a01af8159216f2dd6215a08669890f6c029ca8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
The OS provides the error string in this case.
This gives more information to the developer seeing a generic
error.
Change-Id: Ia03642982f3513ee5a8a9fa98d918e948f8d97a5
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Windows unhelpfully writes to only one byte of the output buffer
when getsockopt is called for a boolean option. Therefore we have
to zero initialise the int rather than initialising to -1 as was
done before.
This in general only works for little endian architecture, because
the word would look like 0x01000000 on big endian. So I have added
some compile time asserts in the assumption that windows is always
little endian. This is ok for comparisons with 0/false, but not
comparisons with true or nonzero values.
In the case of IPV6_V6ONLY, it is documented as DWORD (unsigned int)
but on some windows versions it is returned as a boolean triggering
the warning. I removed the warning, as the conversion to int works on
both LE and BE since it is only compared with zero.
Task-number: QTBUG-23488
Change-Id: I3c586d1ada76465fc045a82661f289920c657a4c
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Only test code change, we already have the correct behaviour
Task-number: QTBUG-20001
Change-Id: I2296f405f47f9c8d15796e69f9d1854063e38d6a
Reviewed-by: Richard J. Moore <rich@kde.org>
remove "header" and assignmets which are defaults or bogus,
reorder some assignments.
Change-Id: I67403872168c890ca3b696753ceb01c605d19be7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test is broken in a couple of ways. A few one line fixes
combined into a single patch.
1. Linux is the only OS that does
abstract unix domain sockets by prepending a null as the first
character. Don't test this on non-Linux platforms and expect
it to pass.
2. Change QVERIFY2 to QCOMPARE so we can see why this
fails in CI but no on the local system. Use QCOMPARE
where possible.
Change-Id: Ic3d2cf9696730dc4d6589539fdfe8a48ccf28de5
Reviewed-by: Alex <alex.blasche@nokia.com>
Due to recent changes in the test it should now compile
and run properly. This re-enables the test.
Change-Id: I6c647d99fa1f1b1c53e006fef2865d6be08ec16c
Reviewed-by: Alex <alex.blasche@nokia.com>
Change the ifdefs in our own code (except openssl backend) to use the
new configure flag.
Change-Id: I8774734771c66b22164b5fae8fdb27814ac3df7b
Reviewed-by: Richard J. Moore <rich@kde.org>
- Made test depend on subprogram
- added install of subprogram
Change-Id: Ib263e9e75ed3c900b52fb1c9b6d319e71d19bdbb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QNetworkAccessManager was ignoring the supplied credentials, although
webkit seems to support these urls at a higher level.
Following the behaviour of browsers:
We use supplied credentials if authentication is required.
We add supplied credentials to the authentication cache.
We emit authenticationRequired signal if the credentials were wrong.
We do not use previously cached credentials for that url
Synchronous http requests fail, if the credentials were wrong.
Task-number: QTBUG-18107
Change-Id: If46e8eab1511ba8a0f4bbe0d4efaabc4df0b8ab4
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- made subdir test depend on echo
- remove SRCDIR and changed to use TESTDATA and QFINDTESTDATA
- added waitForFinish() to handle slow networks
- removed core module header from echo subprogram and replaced
with needed header only
- Added ipv6 skip to connectToIPV6Address() if not available
- Added check QT_BUILD_INTERNAL and skip tests if backend
not available
- Skip permission tests if run as root
- Removed win32 debug and release directory locations so that
application is in known location relative to test data
Change-Id: I58c3c2fca3cd2fee72fdb81d016bb4fd7fe08ac2
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Changed to use TESTDATA and QFINDTESTDATA instead of SRCDIR
Change-Id: I30bf175c2c9044e1f8556260a032467ca0dfc09f
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Changed to use TESTDATA and QFINDTESTDATA instead of SRCDIR
Change-Id: I1957ef287ba2f337b5e0b2c6245d872eacb6316f
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QLocalServer could only listen to sockets it created.
Thi is not always possible as sockets may be passed
by socketpair() or have to be created locally by
other means. This adds a similar feature to QLocalSocket
where a native descriptor maybe used.
Change-Id: I43b0af179b3b868dd164d4e1fd312ff4546cf9ff
Reviewed-by: Michalina Ziemba <michalina.ziemba@nokia.com>
Reviewed-by: Tapani Mikola <tapani.mikola@nokia.com>
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
An old coding error meant that the C runtime abort() function was
being called instead of QFtp::abort() when cancelling an FTP download
using QNetworkReply::close()
Task-number: QTBUG-22820
Change-Id: Ib97fda9769b2b55a08c042c66c4444cb6216d2b1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Helper processes were not found properly on all network tests
when the test was run with "nmake check":
- tst_qtcpsocket
- tst_qtcpserver
- tst_qnetworksession
- tst_qnetworkreply
Task-number: QTBUG-24199
Task-number: QTBUG-24203
Task-number: QTBUG-24226
Task-number: QTBUG-24231
Task-number: QTBUG-24232
Change-Id: Ia4451b5a5e3fe9f81aba3837baf8292411f995d8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Shane Kearns <ext-shane.2.kearns@nokia.com>
Marked two tests insignificant due to failures, these need to be
fixed later and then re-enabled:
- tst_qnetworkreply
- tst_qsslsocket
Task-number: QTBUG-24203
Change-Id: I9647833bf15fe5a340d7ef59e1dcb007a92677dc
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
QLocalServer had no way to set socket options
that more complicated servers require. The
first set of options allow setting of access
control on the sockets.
Change-Id: If4268c66462fc2e6cf1e70b1d5f56c76d2c69228
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
Window system Macros where deprecated so use
Q_OS_WINCE for now. This code will need
some refactoring, but this is the first
step to it.
Change-Id: I5876b80ee45d4b38ac63fc7d51e775dc70bbd485
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Lackey is currently not built due to a qscript dependency. Mark the
test as an expected failure, so we can resume testing QLocalSocket
again. See QTBUG-24142
Change-Id: I2642ed30cf7a2068f30f63801c632fea7dae7691
Reviewed-by: Andrew Stanley-Jones <andrew.stanley-jones@nokia.com>
This autotest assumed that various network operations could always be
completed within 5 seconds. Notably, it assumed that an attempt to
resolve a nonexistent hostname would always result in an error within
5 seconds. In my testing, it usually takes 4-6 seconds to complete,
but occasionally takes as much as 13 seconds.
(cherry picked from qt4 commit c85faef67b6a7e8fcedb4ce800282d41f5b79ec1)
Change-Id: I982ecf6ebc1bb8ee2184cf5592cb2684474c870b
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The QNetworkReply finished signal does not have a bool parameter.
Change-Id: I87bd0410545f7a2fc2ab63cca90548f0585bf7a0
Reviewed-by: Shane Kearns <ext-shane.2.kearns@nokia.com>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
This file was removed in commit ba9302b8a9.
Commit 8fad23f326 removed openssl.pri from
src/network/ssl/ssl.pri, but not from the qsslsocket autotest.
Change-Id: Ic1a576ee7f0ee3d68471121ba636b94ce7bae455
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Always use <qt_windows.h> as the last file to be included.
- Remove it from some headers, use Qt::HANDLE instead of HANDLE.
- Clean up #ifdef, use Q_OS_WIN for Windows/Windows CE.
- Add NOMINMAX to qt_windows.h to avoid problems with the
min/max macros.
- Remove <windows.h> from qplatformdefs.h (VS2005)
Change-Id: Ic44e2cb3eafce38e1ad645c3bf85745439398e50
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Open the comparison file as text mode, so that it does not differ from
the dumped certificate in CRLF vs LF line endings.
Change-Id: I54d6ea6e37044059e89e762435657ebf5fa6cb39
Reviewed-by: Richard J. Moore <rich@kde.org>
This has been broken for months, but invisible because the code causing
the link error is unreachable (due to QSKIP). So the link error only
occurs in debug builds with -O0.
Change-Id: I6093a7803bedf37bfc8c2d9ff0b28b2309b57959
Reviewed-by: Richard J. Moore <rich@kde.org>
The QDnsLookup class provides asynchronous APIs for performing
DNS lookups. For now, the following lookups are supported:
- A and AAAA
- CNAME as defined per RFC 1035
- MX as defined per RFC 1035
- NS as defined per RFC 1035
- PTR as defined per RFC 1035
- SRV as defined per RFC 2782
- TXT as defined per RFC 1035
Task-number: QTBUG-10481
Change-Id: I46c1741ec23615863eeca3a1231d5e3f8942495e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
pause and resume is currently only supported upon emitting the
QSslSocket::sslErrors() signal. The API was added in QAbstractSocket to
also support QAbstractSocket::proxyAuthenticationRequired() in the
future.
This is the first patch to support that feature on the socket level,
another patch will follow to support sslErrors() and
authenticationRequired() in QNetworkAccessManager / QNetworkReply.
Task-number: QTBUG-19032
Change-Id: Ide2918268590ab9a01454ab26cb7fdca3dc840ab
Reviewed-by: Shane Kearns <ext-shane.2.kearns@nokia.com>
This test sometimes gives different results on consecutive runs, and is
therefore insignificant for the purpose of regression detection.
Task-number: QTBUG-23837
Change-Id: I8747972c5cb7952089c54cbd22e1660db551e2f5
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
QAuthenticator used it for the convinience of QHttpSocketEngine only.
QHttpSocketEngine has now been ported to use QHttpNetworkReply to parse
HTTP responses.
Change-Id: Idf6e70aa76613aad6e3d789d81ca1b4fd73575c2
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
