Prevents crashing when some menu or similar is shown, although the
visual result might not be ideal.
Task-number: QTBUG-29729
Change-Id: Ia840b3ec17f5ef30ee58150bd2f807ca5e72cc12
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Andy Nichols <andy.nichols@digia.com>
Some systems may have multiple DRM devices attached to a single seat and we are
not guaranteed to pick up the primary GPU. With this flag we can control how
DRM devices are detected and consider only the primary GPU.
This is very useful for the kms plugin or QtCompositors running on kms in order
to use the right DRM device.
Change-Id: I8b91e78f148b25aaa4e40724e39e0ed0918ca100
Reviewed-by: Andy Nichols <andy.nichols@digia.com>
Functions normally found from <sys/socket.h> are available on VxWorks
from <sockLib.h> header.
Change-Id: I2263ec40ba9f37bc95755b633fb43d66ceb2777c
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
This test has recently timed out a few times on OS X test runs, with
no relevant changes to account for the timeout.
Task-number: QTBUG-27890
Change-Id: Ia24f7812ed2a0b3eac51847a7dacbc9f225b48b8
Reviewed-by: Simo Fält <simo.falt@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Add QLineEdit::addAction() overloads,
allowing for a variable number of icons or user-defined
widgets.
Change-Id: Id298f18c2f47cc998170357e65cc6098df851aab
Done-with: Kevin.Ottens@kdab.com
Reviewed-by: Thomas Zander <zander@kde.org>
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
CSSM_DATA_PTR was deprecated in 10.7. Replace SecCertificateGetData
with SecCertificateCopyData.
Task-number: QTBUG-32715
Change-Id: I762687370689b5b5c032567240667631b1ffde98
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
The "0" must have been added because there was no __has_feature for
the feature back in the day. Now it exists.
Change-Id: I50f0544ae82a8be54a8d26da400e31c1906dad9e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
the -l* fallback is for adding libraries. it obviously makes no sense in
its negated form.
Task-number: QTBUG-32550
Change-Id: I9f3af9a2fc059ba39987d4b197ed4778cc7f35b6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Previously, the topmost untransformable's scene transform, which
includes the item's position and local transformation, was used to
determine the item's anchoring position. This position was then
passed on to be multiplied by the item's transform again. This
works fine for toplevel untransformable items that don't have any
transform set at all, but those who do would have their transforms
applied twice - one to determine the anchoring position, and again
to transform the item itself. Since only translation transformations
can affect the first operation (the anchoring pos), this bug only
applies to items that set ItemIgnoresTransformations and use a
local transform that includes translation.
Task-number: QTBUG-21618
Change-Id: I772d52d59dfd9f242d0140632a87e9c68dfe0ea1
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Added the compiler options, we need the info of sdk.
Task-number: QTBUG-32715
Change-Id: I70612f36a16e0ab5025194a10ce399822e159c7c
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
By not assuming that the file system is case insensitive. OSX supports
both.
Change-Id: I11a4ac4cdff97b97b183dd319757a42ae14bb52d
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
By not assuming that we have the '/Developer' directory at the root
of the file system. 'Users' is less likely to be removed/deprecated.
Change-Id: I659bdb67cfb1ed2f73bc643ba4afe1f1f89d5bc5
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
If the files directory is not world-readable as well as
writable, the "rm *" command will fail because it cannot list
the files to delete.
Task-number: QTBUG-32079
Change-Id: Idb32a2be3184b9ffc43d011136fcc6f2a2a01756
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Reviewed-by: Simo Fält <simo.falt@digia.com>
On Android, we need to be able to get access to the output
file remotely, so we make it world-readable.
Task-number: QTBUG-32079
Change-Id: I0a53a952d03339c0f1a1316f38bd206075589bde
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Reviewed-by: Simo Fält <simo.falt@digia.com>
To make it easier to debug failures, adds the "testcase"
commandline option, which takes the name of the test to
run and then just runs this single test.
Change-Id: Ib202bb2a5dac889b6691f9c4d0620b3e0941cf3d
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
On systems where xkbcommon >= 0.2.0 the output should be
xkbcommon .............. yes (system library)
instead of
xkbcommon .............. yes
Change-Id: I5807946e61814d414a68a15ad96c91f25c9482ee
Reviewed-by: Gatis Paeglis <gatis.paeglis@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Make qabstractproxymodel and qidentityproxymodel build and run
even if -no-widgets is used since they don't depend on Qt Widgets.
Change-Id: I48bc2f6a78812b1bf0083f76c6a4e106f4e38650
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This has the possibility to be very slow on some GPUs. A nicer alternative would
have been to fix this in QOpenGLContext, but with makeCurrent and updateContext
having been merged in Qt 5, makeCurrent is required every frame call, and thus
cannot be fixed there.
Change-Id: Ib17dbb3a1e4e89c60dfd4f12a55eeff353f9075f
Done-with: Carsten Munk <carsten.munk@jollamobile.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
For some time, we've assumed that the URL specification had a mistake in
that it didn't allow the "#" character to appear decoded in the
fragment. We've gotten away with it so far.
However, turns out that the CoreFoundation NSURL class doesn't like it.
So we have to be stricter.
[ChangeLog][Important Behavior Changes][QUrl and QUrlQuery] QUrl no
longer decodes %23 found in the fragment to "#" in the output of
toString(QUrl::FullyEncoded) or toEncoded()
Task-number: QTBUG-31945
Change-Id: If5e0fb37bae84710986c9ca89bd69ec98437cd63
Reviewed-by: David Faure (KDE) <faure@kde.org>
It's a good practice to always replace bad UTF-8 sequences with the
replacement character. It could be considered a security issue too.
Change-Id: I9e7d72e4c4102cdb8334449b5e7f882228a9048f
Reviewed-by: David Faure (KDE) <faure@kde.org>
Those sections contain more than one components of a URL, separated by
delimiters. For that reason, QUrl::FullyDecoded and QUrl::DecodedMode do
not make sense, since they would cause the returned value to be
ambiguous and/or fail to parse again.
In fact, there was a comment in the test saying "look how it becomes
ambiguous".
Those modes are already forbidden in the setters and getters of the full
URL (setUrl(), url(), toString() and toEncoded()).
[ChangeLog][Important Behavior Changes][QUrl and QUrlQuery] QUrl no
longer supports QUrl::FullyDecoded mode in authority() and userInfo(),
nor QUrl::DecodedMode in setAuthority() and setUserInfo().
Change-Id: I538f7981a9f5a09f07d3879d31ccf6f0c8bfd940
Reviewed-by: David Faure (KDE) <faure@kde.org>
The setting of EncodeDelimiters was temporary until we could remove the
old qt_urlRecode "decode all" mode (not the FullyDecoded mode, that
stays).
Change-Id: Ic07ebe4bb7fc72351b65bfb4619b71206cc8c0cd
Reviewed-by: David Faure (KDE) <faure@kde.org>
Just minor fixes and changes in wording, to support the new
understanding of the percent-encoded characters.
Change-Id: I77ec10e41f32292d705e4aa8197b9ddce5bef6d2
Reviewed-by: David Faure (KDE) <faure@kde.org>
This commit is similar to the previous commit that changed the behavior
of QUrl, but now to QUrlQuery.
We can now remove a section of qt_urlDecode, which is no longer used:
there's no "decode everything" mode anymore.
Task-number: QTBUG-31660
Change-Id: I66cfbfd290eeba5b04688cd5ffd615dd57cc6309
Reviewed-by: David Faure (KDE) <faure@kde.org>
The longer explanation can be found in the comment in qurl.cpp. The
short version is as follows:
Up to now, we considered that every character could be replaced with
its percent-encoding equivalent and vice-versa, so long as the parsing
of the URL did not change. For example, x:/path+path and
x:/path%2Bpath were the same. However, to do this and yet be compliant
with most URL uses in the real world, we had to add exceptions:
- "/" and "%2F" were not the same in the path, despite the delimiter
being behind (rationale was the complex definition of path)
- "+" and "%2B" were not the same in the query, so we ended up not
transforming any sub-delim in the query at all
Now, we change our understanding based on the following line from
RFC 3986 section 2.2:
URIs that differ in the replacement of a reserved character with
its corresponding percent-encoded octet are not equivalent.
From now on, QUrl will not replace any sub-delim or gen-delim
("reserved character"), except where such a character could not exist
in the first place. This simplifies the code and removes all
exceptions.
As a side-effect, this has also changed the behaviour of the "{" and
"}" characters, which we previously allowed to remain decoded.
[ChangeLog][Important Behavior Changes][QUrl and QUrlQuery] QUrl no
longer considers all delimiter characters equivalent to their
percent-encoded forms. Now, both classes always keep all delimiters
exactly as they were in the original URL text.
[ChangeLog][Important Behavior Changes][QUrl and QUrlQuery] QUrl no
longer decodes %7B and %7D to "{" and "}" in the output of toString()
Task-number: QTBUG-31660
Change-Id: Iba0b5b31b269635ac2d0adb2bb0dfb74c139e08c
Reviewed-by: David Faure (KDE) <faure@kde.org>
The QCloseEvent's accepted state should not be inverted for the
QWindowSystemInterfacePrivate::CloseEvent. To make Widgets work
with this change, pass whether the close was accepted from close_helper
to the QCloseEvent generated by QGuiApplication.
Task-number: QTBUG-28965
Change-Id: If384b0355776b93df02dff2ab78b5647903200e7
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Josh Faust <jfaust@suitabletech.com>
7721c3d27c fixed the case where two similar definitions are in the same
directory. This commit fixes the case where two similar definitions are
in different directories, both in the search path (GenericDataLocation).
If the file extension gives us the same mimetype twice, there's no conflict,
i.e. no reason to fallback to determination from contents.
Change-Id: I72c56004b6d5e88964159e53ec160ce8b06c2264
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: Icd7a192701958673fe216f40ddab710f5f63a8b8
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Reviewed-by: Andy Nichols <andy.nichols@digia.com>
CapsLock was incorrectly handled in EvdevKeyboard, which led non-letter
keys to be masked with Qt::ShiftModifier. The default builtin keymap
is modified to have IsLetter flags for correct keys.
Task-number: QTBUG-32560
Change-Id: I561bbad7bcffe1f4c4bbed7bf72106b689e57fe0
Reviewed-by: Andy Nichols <andy.nichols@digia.com>
2af0a778f464980594c36098e4a8ba4448edfd29 the fix for QTBUG-27410
caused this Designer bug. Doing the automatic level escalation only
for "special" windows and avoiding it for plain Qt::Window type
windows is one way of fixing the Designer problem.
Task-number: QTBUG-31779
Change-Id: I1da5454f31111f36480fac3b53be6d5f0ce40047
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Argument to \qtvariable is the QT variable needed for linking to the
module.
Task-number: QTBUG-32172
Change-Id: I181c0cfaf9529f3aea741cdaee0f20d6cd0e2d2f
Reviewed-by: Martin Smith <martin.smith@digia.com>
Specifies the QT variable needed in the .pro file.
The argument of the command is the qmake QT variable.
To use, add "\qtvariable <value>" to a QDoc comment
which contains the \module command.
QDoc will then associate the class with the QT variable.
Only supported for C++ classes at the moment.
Part of work done for QTBUG-32172
Task-number: QTBUG-32172
Change-Id: Ia8eea30fcfc771191c23a5f5994a48732959ea49
Reviewed-by: Martin Smith <martin.smith@digia.com>
Added SH_Widget_Animate in QStyle styleHint, and use it to determine
whether widgets should be animated or not.
In this patch QTabBar, QColumnView,QTreeView and QWidgetAnimator are
patched to obey the new Hint.
Change-Id: Iefdbddc52c7843f6653dbfb5462125942489b4d9
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Since updating the xkb_state throght core events is more
tricky (opposed to the xcb-xkb code path) where we have
to use xkb_state_update_key, we need to make sure that our
local state is in sync with the X server's state.
The local state was getting out of sync if key was pressed
down in a Qt application and released in other X client (by
changing the focus to another window with a mouse, for
example).
Task-number: QTBUG-32660
Change-Id: I662bf5aad3ab0e8591109994e746d85ff61ad6ef
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Change the version number to 1.0, and use the public doctype.
Change-Id: I9b071c80c410c31c38813c4447edd7b186226fab
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
* changeFont is a delegate method of NSFontManager.
* exec() will not be called in Qt Quick.
Task-number: QTBUG-32450
Change-Id: I05e43ce84d28ff32c88d75bd6ee60653de6ca4f0
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Just moved applyCursor() and defaultCursor() to a #ifndef block.
Change-Id: I14c21aa509395fb1bd72d389cfc46f0f34ab7649
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Change the checking for created EGLNativeWindowType so that zero
is a valid value. This is the case e.g, with BeagleBoard, where
widget application cannot be run without this change.
Change-Id: I36c30091e1a5a0598ae3822d0be8dc4362779c0b
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
We don't support native widgets in Android, so we can get into a mess
when people set this widget attribute, since the FB compositor
will assume that all widgets have their own backing store. This adds
a capability flag to the QPlatformIntegration which allows the plugin
to disable the WA_NativeWindow feature.
Task-number: QTBUG-32685
Change-Id: Ic200487da4a297f71ab594cf7c90d1e1d53bacd3
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
If a widget is deleted as a result of a window activation changed then
it is possible that the parent does not clear the focus because of the
activation change. If the focus child is actually part of an embedded
widget in the graphicsview then it needs to be handled explicitly in
this case too.
Change-Id: I3e7a2b963f175828de4c19283178560abca91235
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Forward-port of cb7f32f5b861fe115fa71f64500a5cbb0b643f1b (Mark
qt4_use_modules and qt4_automoc as obsolete., 2013-07-04) from
cmake.git.
Change-Id: I0c24408ef06bc93eb0e55108cf4eab2f8cbd19cb
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
We would resize the backing store without resizing the viewport,
which would cause all subsequent blits of the backing store to the
screen to look broken.
Task-number: QTBUG-32146
Change-Id: I65bae051b7cfbbc61fc285e4baa74685d5639569
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
