C++ distinguish between "char", "signed char" and
"unsigned char", they are three independent types.
Fix QVariant behavior on ARM. On ARM "char" may mean
"unsigned char", but we depends on the sign during
a numerical conversions.
Change-Id: I610ce3fb88ed5964b67f3ae442d264fe16b2d261
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qIsControlChar() doesn't handle SMP code points, it is outdated
and is not used anymore; drop it
Change-Id: I934ace1e44eb2652e426fccc579b563d31197fca
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
when SMP sybmol is present in the font.
this is a simple typo fix, actually
Change-Id: I54a4df43ece1a36f5c7997d121b7655afb2069e3
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
The implicit cast to QJsonValue was being ignored probably because the
compiler was generating a default QJsonValueRef assignment operator
Change-Id: I3a041595497308868dd7e4aab71027ce21bf8f0b
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Those components are not known to FindGTK2.cmake.
Change-Id: I4a7fe35d7d118168c24285f3ea8f57822b2facff
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This doesn't compile with a typical cross-compilation setup, which
generally won't include cups headers. The commit should have been
rejected, but wasn't, due to a bug in the Qt Project CI.
Since it now causes all other modules depending on qtbase to fail their
CI, it must be reverted to minimize disruption while the commit can be
amended and/or the test toolchain updated to include cups headers.
This reverts commit 80f7a38890.
Change-Id: I315ae275b37de358a74af28ab7bd691c9849acba
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
CUPS is the only supported print system on UNIX, LPR/PS support has
already been dropped but some LPR specific code still remains.
* Move qt_getCupsPrinterPaperSizes from qprinterinfo_unix to
QCUPSSupport
* Remove qprinterinfo_unix as no longer used
* Remove LPR related code from QPdfPrintEngine
* Remove all QT_NO_LPR uses
* Remove most QT_NO_CUPS uses, use QT_NO_PRINTER where necessary
Some QT_NO_CUPS uses remain in QPdfPrintEngine, these will be removed
in a following change implementing a CUPS plugin.
Change-Id: I439b6fad9cf88c3d24aa48e49475f49ad310dbad
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The main reasons for doing this are:
1. _qpa.h end up in the master QtGui include file. QtGui is meant for
userland applications. qpa code is neither binary nor source compatible.
Inadvertant use of QPA api makes the user code binary-incompatible.
2. syncqt creates forwarding headers for non-private header files. This
gives people the impression that this is public API.
As discussed on the mailing list, even though QPA api is internal and subject
to change, it needs to treated differently from private headers since they
will be used by in-qtbase and out-of-qtbase plugins.
This commit does the following:
1. The _qpa in QPA header files is dropped.
2. syncqt now treats any file with qplatform prefix as a special file and
moves it to qpa/ directory. The recommended way of using QPA API in plugins
is: #include <qpa/qplatformfoo.h>. This allows the user include QPA API
from multiple modules (for example, qplatformfoo might be in QtPrintSupport)
3. The user needs to explicitly add QT += <module>-private to get access to
the qpa api.
4. Creates compat headers for the olden style qplatformfoo_qpa.h and QPlatformFoo
includes.
This commit does not change the cpp filenames. This requires a more careful
merging of existing non qpa cpp files and existing cpp files on a case by
case basis. This can be done at anytime.
The following files are not renamed as part of this changed but will be fixed
as part of a future change:
src/gui/kernel/qgenericpluginfactory_qpa.h
src/gui/kernel/qgenericplugin_qpa.h
src/gui/kernel/qwindowsysteminterface_qpa.h
files were renamed using
for x in `find . -name "qplatform*_qpa.h"`; do git mv $x "${x/_qpa.h/.h}"; done
for x in `find . -name "qplatform*_qpa_p.h"`; do git mv $x "${x/_qpa_p.h/_p.h}"; done
includes were renamed using script
for file in `find . -name "*.h" -or -name "*.cpp" -or -name "*.mm"`; do
sed -i -e 's,.*#.*include.*<\(Qt.*/\)\?\(QPlatform.*\)>,#include <qpa/\L\2.h>,g' \
-e 's,.*#.*include.*"\(Qt.*/\)\?\(QPlatform.*\)",#include <qpa/\L\2.h>,g' \
-e 's,.*#.*include.* "\(qplatform.*\)_qpa.h",#include <qpa/\L\1.h>,g' \
-e 's,.*#.*include.*"\(qplatform.*\)_qpa_p.h",#include <qpa/\L\1_p.h>,g' \
-e 's,.*#.*include.*<\(Qt.*/\|Qt.*/private/\|private/\)\?\(qplatform.*\)_qpa\(.*\)>,#include <qpa/\2\3>,g' \
-e 's,.*#.*include.*"\(Qt.*/\|Qt.*/private/\|private/\)\?\(qplatform.*\)_qpa\(.*\)",#include <qpa/\2\3>,g' \
$file
done
Change-Id: I04a350314a45746e3911f54b3b21ad03315afb67
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
The use of these went away in Qt 4 commit
f7d61dab69308f0993c8a5f2232226d1713ac4a7.
Change-Id: I0bcd52cf59f653e5b699fa7cfaf4be510bac6b88
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Change-Id: Ie19c338ed6449ea1509306cbda5dc251295783ae
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The overload of this method was renamed
in b64426248d but this one was not.
Change-Id: I60a6ddf0fcf9deea31ccf51e7b0db16c66023356
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Some return values were empty, or missing. Use QByteArrayLiteral.
Change-Id: Ib9f124dea1245c000c53098164bf29e78eaa13d2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
- Add a method returning a QMultiMap<int index, QString key>
to QFactoryLoader, determined from metadata(), correctly
reflecting the data structure ('Keys' being a list)
- Add convenience templates to create plugins via factory
interfaces
Change-Id: I247749aa3245f635e476605db1c4cd9c74b74dea
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
We already have the necessary enablers in QOpenGLExtensions.
Change-Id: I90d763516d8b92c09c878133552200c94a46fbf2
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Document that physicalSize() should return the size in millimeters.
Change-Id: Idf1283aa9b303bcb95361688f2ef663979bc6516
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
This also tests by consequence that the behaviour of QByteArrays
containing NULs is consistent. Right now, that means the QByteArray
processing stops at the NUL, which is the same behaviour as if a
pointer to the byte array's data were used. (it's what happens if
there's no QByteArray overload and the const char* one is called)
Change-Id: If56a822f95866e8cb5b153d07b48198bb83fb386
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This commit completes the previous commit so that both QString and
QStringBuilder now operate on UTF-8 input.
A small fix was required in QStringBuilder: an if clause isn't enough
to separate the two append versions. Since there are no QString
functions that append to char*, if we're converting to a QByteArray,
we need to go through a QString first in a separate function.
Change-Id: Ic503340c5d0c32d420c90c91cc2e0fc1ae9230f3
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This is a crude change, not the most efficient way. I'll clean up and
make it prettier later on, when I've had the chance to optimise the
UTF-8 codec too.
Change-Id: I78e30e8d3bddf6ad0210c9c4cedb9a7ce63d1a7d
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I052a3412a568ad639f2bf169b4491b56dddff1c7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The file has been UTF-8 encoded for years, which means that the line:
QString longerBLOB( "abcdefghijklmnopqrstuvxyz¿äëïöü¡ " );
Loaded a mojibake into QString. Then, this data was stored as a blob
in the database by calling longerBLOB.toLatin1() (a QByteArray), and
reloaded for check using toString().
Once the QString default codec changes to UTF-8, the mojibake would
get fixed, and the test would fail. Make sure it doesn't happen.
Change-Id: If12d6124c973e4a1c1b7978d90fffb9aa5545c66
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Change-Id: I405e8d1cfbf7f0607f8525f9c8c93053109478d9
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
If QtCore is built with Qt 5.0 API, the Q_CORE_EXPORT does not appear
anywhere and these functions wouldn't get exported, despite being
defined. So make sure that they get the Q_CORE_EXPORT attribute.
Change-Id: I0684ea1b9ad634c13dca12c97683032e44f6a290
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Change-Id: Iaf1a6495ee96859af9c5c25a54ea1fc463910cd3
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: Icb3ab0e1f4f3173563f3de36115b5457cf1ba856
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
The plugin metadata is placed into a special section in the
object file on ELF systems to allow finding it fast. Place
the data into a special section on Mac and Windows as well,
even though we don't have Mach-O or COFF parsers available
yet.
This will allow us to add the Mach-O and COFF parsers as a pure
optimization later on.
Task-number: QTBUG-25054
Change-Id: I376d5443ede715aee2c68fb62d24afdbf66e5685
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QNetworkProxyFactory used to check only for the http_proxy environment
variable in systemProxyForQuery. This patch makes it look as well in
https_proxy, ftp_proxy and all_proxy. http_proxy is still used as a
fallback value.
Change-Id: I7934af70d191cd17dbce3b3789260ae1a8332986
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Use "--headers=file" where the file contains the raw headers to send.
This is useful for replaying requests from log files.
Change-Id: I3bbe582d96fc9797f692a0d5772e8164f8265ce0
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
QNetworkAccessManager was using the AutoCloseConnection property
of QNetworkSession to close it when idle. However this property is
only implemented for polling engines and not event driven engines.
Instead, release the network session reference.
If another request comes in, it will be resurrected from the shared
session weak reference.
If not, then after 2 minutes when the connection caches are flushed
the ref count will reach zero and cause the QNetworkSession to be
destroyed (which closes it)
Task-number: QTBUG-15812
Change-Id: I2963bdf13fb02e3ac269489ea463669142f3c5f3
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Windows 7 accumulates networks over time with the status
"not present". This is so it can remember whether a given network
was a public, home or work network next time you use it.
By default, these networks are not returned when enumerating
network interfaces, but we specified a flag to request all networks.
These networks are generally not useful so use the default behaviour
of not reporting them.
Task-number: QTBUG-18824
Change-Id: I4edc4cea83a0e97a88ac649b7d8af95a8a600b89
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The DITA XML didn't contain the correct
QML Module version mumber in the imports
statement.
Change-Id: I22b75facc1396c5adea88be49c86fff11f19f27b
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
The old implementation called setGeometry() clearing the
positioning policy flag.
Change-Id: If8226f86481318e772fba37c2c195037c3d955b0
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
QByteArrayData was binary compatible with QArrayData, but we do not
need a separate class, QArrayData should be sufficient. Preferably we
would use QTypedArrayData<char> but it is not POD, therefore it can
not be initialized with {} syntax.
Change-Id: I1edd7b4f236b06d8f2dbfd8a37a3f5699b6a2c07
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
If we only need to access the font metrics (like in scenegraph) for
layout, we don't need to render glyphs with FreeType at all.
Increase cached linearAdvance to 22 bits so that no overflow will
happen: FreeType returns 16.16 fixed point linearHoriAdvance, but
QFixed is 26.6, we store
glyph->linearAdvance = linearHoriAdvance >> 10
Apparently 'short' is not enough since it's only 16 bits.
Change-Id: Id14eafa19f01a687de11997526281f9e7e860482
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
In Qt 4, we loaded resources through the QTextEdit or
QTextControl if they were the parent of the document.
Modularization for Qt 5 broke this, as we can't cast
the parent to a QTextEdit anymore.
The fix is to make the loadResource() methods in QTextControl
and QTextEdit invokable and discover and invoke them at
runtime on the parent object.
Task-number: QTBUG-25116
Change-Id: Iba04bc16849b0c5ddcd275f12d1a386a8fe591bf
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: Ie1a4e5ceca21c31e7357f28b90abc9129b122104
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
