Add a functions to dump out texts character by character and
as code.
Task-number: QTBUG-43191
Change-Id: I1ac17f2485563f909b71bb1fbd1fd595d1d94223
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
- Fix prototype for glinfo() for Qt 4
- Add more event types and object type flags to event filter.
Change-Id: Ia4160b40486d054e860a339e7b5c9c28695330ae
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Add a set of helper functions and classes providing functionality
for dumping widget/window hierarchies and logging events. They
can be used by including a .pri file for diagnosing bugs and
comparing Qt 5 to Qt 4.
Change-Id: I0206f8e57b02540cd80a3e9446c894023d442ddc
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Unlike qtouchevents, this provides a touch area which logs its
events and devices.
Task-number: QTBUG-40461
Change-Id: Iaaa3589dd692caf8c7078f5ed2ff1e8b2322a369
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
The Overall goal is to make it possible to use correctly-
sized pixmaps in a predictable way, while still doing
something reasonable with small and large pixmaps.
(The recommended pixmap height is up to 18 points.)
Enable use of rectangular icons by selecting pixmaps
based on pixmap height.
Draw a low-resolution pixmap on retina displays if
there is no high-resolution pixmap available. Scale
large pixmaps to fit the available menu bar area.
Add a manual-test with various pixmap sizes
Task-number: QTBUG-33441
Change-Id: I1926181fe27cae526bae58022df3240bae9f8ac8
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
On X11, setting the transient parent is not enough to get it
centered w.r.t. its parent: it must also be a dialog window.
Change-Id: Icfc664e17e53f23cd025dead30e3966f859a1dc5
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
This is a very useful tool to test the behavior of a given platform
when it comes to rendering on three contexts to three window surfaces
from the gui thread and calling swapBuffers for each.
Change-Id: If3abd055d0dee7cfb24098484326aa24261556bc
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Widgets and layouts added or inserted to a layout are checked for:
- Not being NULL
- Not being the parent widget of a layout or the layout itself,
respectively
Without this commit, adding a widget to its own layout would result in a
CPU-hogging infinite loop. Now, a warning is written to stderr and the
add or insert function call is ignored.
The checks are implemented as public functions of QLayoutPrivate and
thus accessible in QLayout's descendants to be used in various
"addWidget", "insertWidget", etc functions.
Unlike 'classical' layouts like QGridLayout, QFormLayout does indeed
accept widgets that are NULL. To not break this behavior, any call for
the check functions first tests if the widget or layout, respectively,
to test is NULL or not and calls the check only in the latter case.
Automated tests for QBoxLayout, QGridLayout, and QFormLayout were added.
For an unpatched Qt 5.3, each of those automated tests will freeze as
explained in QTBUG-40609. For a fixed version, warning messages about
invalid parameters to addWidget/addLayout/... calls will be read by
QTest::ignoreMessage, resulting in a passed test.
Change-Id: I1522d5727e643da3f7c025755975aca9f482676d
Task-number: QTBUG-40609
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Show debug output for rejected and currentColorChanged signals,
because accepting is not the only scenario to be tested.
Task-number: QTBUG-40855
Change-Id: If741ab19392e7d4314e0eff82a939d202ae86b48
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Followup to da9e02eb83:
If the stylus is a Wacom Art Pen for example, the regular_widgets
test will show a rotated ellipse with size proportional to pressure
for each tablet point, instead of a circle.
Task-number: QTBUG-39458
Change-Id: I4bbb5f8ceabf7006928d95df3ecd62378394f085
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
Manually included changes from
3a347a4e70
in src/opengl/qgl.cpp.
Conflicts:
src/opengl/qgl_qpa.cpp
src/plugins/platforms/android/androidjnimain.cpp
Change-Id: Ic26b58ee587d4884c9d0fba45c5a94b5a45ee929
This is helpful to e.g. test an NTLM proxy.
The test server currently does not support NTLM; this test offers a
possibility to specify a proxy server via environment variables.
Change-Id: Iea94656d38424c1d932fc854d13ca15ca47cdd68
Reviewed-by: Richard J. Moore <rich@kde.org>
QOpenGLWidget is now public.
In addition Qt::WA_AlwaysStackOnTop is introduced to support the
special case of semi-transparent QOpenGLWidget or QQuickWidget on
top of regular widgets.
hellogl_es2 becomes the qopenglwidget example. This example performs
painting both via QPainter and native GL commands and has the OpenGL
widget combined with other, normal widgets.
The widget stack receives some changes when it comes to renderToTexture
widgets like QQuickWidget and QOpenGLWidget. Calling update() will now
result in a paint event, which is essential for QOpenGLWidget since we
want it to behave like a regular widget. The dirty region handling is
extended specially for such widgets due to performance reasons.
(an OpenGL content update must not result in any backingstore painting,
and is thus handled as a different kind of dirtiness)
[ChangeLog] Added QOpenGLWidget. This widget serves as a replacement for QGLWidget.
Task-number: QTBUG-36899
Task-number: QTBUG-40086
Change-Id: Ibf7f82fea99b39edfffd2fc088e7e0eadbca25cf
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
- Show which button was pressed or released
- Render an ellipse proportional to pressure for each point drawn
- Different color for the eraser
- More complete output for each event
- Don't show mouse events by default, just as most tablet applications
can now ignore mouse events on the drawing canvas. But for the
purpose of testing interleaving of tablet and mouse events,
one can give the argument --mouse when starting this program
to show them too, as before.
Task-number: QTBUG-39458
Change-Id: I5e03f1aa748be39d524bd6984ff5d66579787cf9
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Compile on Windows, add command line options to activate the
various tests.
Task-number: QTBUG-38858
Change-Id: I38c6a9a6711831b2bd8b6ea051dd19615cc911a1
Reviewed-by: Alessandro Portale <alessandro.portale@digia.com>
It was always constructing a QUrl from the string causing the warning
"Non-native QFileDialog supports only local files" with the
new QUrl-based implementations of getOpenFileUrl(), etc.
Change-Id: Idd9bb432a48865df137f8f39f53014dda150ffe9
Reviewed-by: David Faure <david.faure@kdab.com>
So far, we had to listen to the QObject::destroyed signal from the QScreen
class to figure out whether a screen was removed. Often, this is already
too late, given that most of the QWindows have been moved by then and we
don't get to react before the windows are being set to the primary screen.
This patch introduces a new signal that will notify about a screen removal
before the screen is started to be destroyed, so that the application gets
to decide what to do with the screens before Qt decides to move things around.
[ChangeLog][QtGui][QGuiApplication] Added QGuiApplication::screenRemoved
signal to inform that a screen has been removed, before Qt reacts to it.
Change-Id: I99304179f4d345cae581a87baac6cff7b8773dea
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
When navigating with the directional keys or tab/backtab, there are
certain situations where the cell that is edited is incorrect.
For example, consider the table below.
'^' represents the starting cell and the direction of navigation.
'c' represents the index that is arrived at as the currentIndex prior to this patch as
reported by view.selectionModel()->currentIndex().
'x' is the cell that should be edited:
+---+---+---+---+
| | | e | |
+---+---+---+---+
| | x | |
+---+ +---+
| | c | |
+---+---+---+---+
| | | ^ | |
+---+---+---+---+
Before this patch, the cell that will actually be edited is c, rather
than x, so after editing the cell and pressing enter, the previous
contents of the cell will still be shown.
With this patch, currentIndex() will be changed after every call to
cursorMove(). Navigation into and out of cells is not affected because
the visualCursor member in the QTableViewPrivate tracks the keyboard
navigation entry point. If after the up navigation into the span, the
user presses up, the cell entered is 'e', not the cell above 'x'.
Task-number: QTBUG-29239
[ChangeLog][QtWidgets][QTableView][QTableWidget] currentIndex() now
reflects the top left cell when in a span.
Change-Id: I3dc3db46ebba340102860fc4ad98fcaf91484983
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
On Windows, it is possible to pass native Windows paper source
ids >= DMBIN_USER to QPrinter::setPaperSource() and they are
listed by supportedPaperSources().
Task-number: QTBUG-38897
Task-number: QTBUG-38888
Change-Id: I8f1264e80ce5bdddd3873602200b24eabee00502
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Add also a manual test application. For GLX there is an autotest since
that is likely to be run on one of the CIs. For EGL and especially
eglfs this is likely not the case so a manual test is better.
Task-number: QTBUG-37552
Change-Id: Ib09db5d909befb68d16f69abd401a56abe55f28a
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Now menu items and key shortcuts for Cut, Copy, Paste and Select All
work in the standard ways in dialogs such as the file dialog, provided
that the corresponding QActions have been created and added to the menu.
This depends on new roles to identify each menu item which is so
broadly applicable that it should work even when a native widget has
focus; but the role will be auto-detected, just as we were already
doing for application menu items such as Quit, About and Preferences.
When the QFileDialog is opened, it will call
redirectKnownMenuItemsToFirstResponder() which will make only those
"special" menu items have the standard actions and nil targets. When
the dialog is dismissed, those NSMenuItems must be reverted by calling
resetKnownMenuItemsToQt(), because to invoke a QAction, the NSMenuItem's
action should be itemFired and the target should be the
QCocoaMenuDelegate.
Task-number: QTBUG-17291
Change-Id: I501375ca6fa13fac75d4b4fdcede993ec2329cc7
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Add all the available QPrinter options to the QPrintDialog manual test
to allow for testing presets.
Change-Id: Ia6394094fc9920da0d6c645793d51650404899d8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Convert the manual print dialogs test to use a ui file as subsequent
changes will add a lot more widgets.
Change-Id: I06ac54b67532f0eea1e91a2d9aca4f587d2fa332
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Add a new QPA class to abstract Print Devices. Each platform instance
will encapsulate all required details about a print device instead of
the code being distributed throughout the print engine and print
plugin.
Change-Id: I7f6a537ad55a6e7f599d83f461b1e2ee62b15094
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
At least if the platform plugin's QPlatformOpenGLContext implementation
supports it.
This completes the QOpenGLFunction changes necessary for dynamic loading
of the OpenGL implementation. Everything else is up to the platform plugin.
Change-Id: I710e6fbee3005360ecf02bc6ef976e1beb513819
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Currently the only supported SPDY version is 3.0.
The feature needs to be enabled explicitly via
QNetworkRequest::SpdyAllowedAttribute. Whether SPDY actually was used
can be determined via QNetworkRequest::SpdyWasUsedAttribute from a
QNetworkReply once it has been started (i.e. after the encrypted()
signal has been received). Whether SPDY can be used will be
determined during the SSL handshake through the TLS NPN extension
(see separate commit).
The following things from SPDY have not been enabled currently:
* server push is not implemented, it has never been seen in the wild;
in that case we just reject a stream pushed by the server, which is
legit.
* settings are not persisted across SPDY sessions. In practice this
means that the server sends a small message upon session start
telling us e.g. the number of concurrent connections.
* SSL client certificates are not supported.
Task-number: QTBUG-18714
[ChangeLog][QtNetwork] Added support for the SPDY protocol (version
3.0).
Change-Id: I81bbe0495c24ed84e9cf8af3a9dbd63ca1e93d0d
Reviewed-by: Richard J. Moore <rich@kde.org>
This fixes the issue that the blitter required sometimes the
texture wrapping to be repeat
Change-Id: I86150d008422facf9040873b0983b0e44be9ad24
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
The Origin for Target rect was deemed a confusing concept. The current
implementation would translate the target rect to the coordinate system
specified. However, the order and "direction" of the vertices would
always be the same. So drawing a texture in for one target rect defined in
one coordinate system would paint the texture the same way as it would
when a texture was drawn for a target rect drawn in the "opposite"
coordinate system. The point with this was that if you wanted to "flip"
the texture you would specify that with the source coordinate system.
However, this approach breaks on different levels, such as QRect has functions
which expects a top left coordinate system (ie. top() and bottom()).
In the end Qt uses a top left coordinate system, hence QWindow specifies
a top left coordinate system, and hence the api becomes easier if it is
not possible to define the coordinate system of the target viewport.
Change-Id: I7dd59b3718380876e87a4bff88381d7a1c7d58c1
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Integrate with QOpenGLTextureBlitter, QOpenGLWidget and friends.
Change-Id: Ic2867b713a21a3d2820d546174fc9164b3dd220c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Enable child widgets (without a native window) that render to an FBO
and are composed with the raster backingstore by the platform plugin.
A preliminary version of QOpenGLWidget is included as private API.
Change-Id: I8f984a4d7db285069ce3d6564707942c823d890d
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
