On machines where multiple versions of VS are installed, the VS version
for the vc(x)proj generator is selected by the entries in the PATH
variable. The first VS installation that's found in PATH is used.
The former logic printed a warning if multiple VS installations were in
PATH and also fell back to the lowest version if a VS version was
registered with multiple install paths.
That's the case for VC 2012 express and prevented its usage.
Task-number: QTBUG-34357
Change-Id: Ia5c66a1aea0c40e4b7460b3aa6c7daee6673da44
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Previously, the full path to the qmake project file was specified as the
key for projGuids when inserting the project GUID into this hash table.
The only place that items are inserted into projGuids is in
VcprojGenerator::collectDependencies at:
projGuids.insert(val.first, newDep->target);
In this case, val.first contains the full path for the given project being
processed at this point. (e.g.: c:\testproject\testproject.pro)
Further in sln/vcproj generation, projGuids is queried with the contents
of <TARGET>.depends so that users may specify another qmake project as a
dependency for a given target.
This occurs in two places, in two ways:
1) In VcprojGenerator::collectDependencies() at:
QString depend = dep.toQString();
if (!projGuids[depend].isEmpty()) {
...
In this case QString depend contains whatever is put into <TARGET>.depends.
Typically this is the plain name of the project you depend on.
(e.g.: testproj)
2) In VcprojGenerator::writeSubDirs(QTextStream &t) by proxy of
extraSubdirs which is a QStringList of the project depends should the
mapping in case 1 fail.
This case works much like the above case, attempting to use each
QString entry of the extraSubdirs list as a key in projGuids.
If either of the above two attempts are successful, the msvc solution is
configured in a way that creates a project dependency, ensuring correct
compilation order and other related behavior.
The fix here stores the target project (e.g.: testproject) as opposed to the
full project path, as that is what is expected in the <TARGET>.depends
statements contained in the qmake project.
Change-Id: Iee05661a64d7a3e4467c5ade48d801fbbfe981b5
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Chris Gilbert <cgilbert@knaldtech.com>
In VS 2010 and newer the /SAFESEH linker option is not passed as
additional option but is represented by the property
ImageHasSafeExceptionHandlers.
Task-number: QTBUG-34392
Change-Id: I3bd19078e695716050dd20736b6bc589bcb1cefd
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
the problem is that there is no sed command on windows ... so build it
into qmake and invoke that from the generated makefiles. cmake does the
same, after all. ^^
Task-number: QTBUG-33794
Change-Id: Ib7077e18acbc5edd79f714c5779a5ed31ea6c093
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Shared between UNIX and Win generators, and allows prfs after
default_post to rely on sane TARGET and DESTDIR values.
This allows us to clean up the DESTDIR logic in testcase.prf,
which was completely busted. Doing the two in separate commits
is unfortunately not possible as the old testcase.prf logic
was so broken it would barf if only looked at.
Change-Id: Ibf21216195c760ee46ae679c162b207b77a9d813
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Platform specific qmakespec needs to enable: autogen_wmappmanifest and winphone. Manifest will be generated once and only for the application template.
The Manifest will generated from following variables:
* PRODUCTID - the GUID (application specific)
* PUBLISHERID - GUID (publisher specific)
* TARGET - short application name (executable)
* AUTHOR
* PUBLISHER
* DESCRIPTION - application description
Change-Id: I225c24dc256c57451775e37658080e88b842a7d8
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The user needs to specify the DEPLOYMENT variable. The syntax
is the same as previously used for DEPLOYMENT. For more info
please refer to the qmake documentation. The change adds
a new itemgroup, "Deployment Files". All files in this
itemgroup are marked as DeploymentContent and are then
packaged with the application either as XAP or the WinRT
specific file format.
Change-Id: Icf85887287c1c97eb782704340eaa3f8dde6719e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
In order to be able to use the linker's /WINMD
and /WINMDFILE options
Change-Id: I2673e20aa073c6b807e8c9f191fd408c7976efc4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The change adds a new ItemGroup with a single library reference:
platform.winmd.
Change-Id: I0c7f4c46654b520afb79b6c6f49b5f2d1af400d3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
It's a generic way to configure the Visual Studio Solution
architecture. It's added to support different project
architectures, ARM specifically. It may be a good idea
to replace the Win32 and x64 with VCPROJ_ARCH=Win32
and VCPROJ_ARCH=x64 defined in corresponding qmakespecs.
Change-Id: I9b23f7393bf248a629c425187d6dd8859092c45c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
qmakespec for either WinRT or WinPhone have to specify
QMAKE_PLATFORM with winrt and/or winphone.
Change-Id: I87e0063881e6edd65de14adb006949247ce49904
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
When building a project in VS then it would cause a rebuild
under certain situations even though a rebuild is not
actually required.
The root problem exists in VS in the following configuration:
1. A file has a custom build tool specified
2. The custom build tool has additional dependencies
3. The input file is specified in the additional dependencies
4. There are files in the additional dependency list
This is the situation with form files in Qt that have include hints
specified in Qt Designer. The include hints get specified in the
additional dependencies for the custom build tool.
What happens is that VS will process files in the additional
dependency list differently based on where they appear in the list
relative to the input file.
If a dependency appears before the input file, VS will require the
file as a build input. If you just specify a file name, VS looks in
the project directory (and only the project directory) for that file.
You have to specify the path (relative or absolute) to get VS to look
elsewhere. If VS does not find the dependency, VS thinks the project
is out of date (since the missing dependency is a required build
input) and will rebuild the input file.
If the dependency appears after the input file and the file doesn't
exist, VS does not include the dependency as a build input. Since the
file is not a build input, no rebuild is required.
Change-Id: I5af460d21ad049ed7819746fd60c98677b810692
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
as a side effect, this fixes the generators that were more bitrotted
(nmake and even more mingw).
Task-number: QTBUG-30644 #close
Change-Id: Iefa3f07125884412d091aa12b44935e5b1fb858a
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
We just need one digest algorithm, any algorithm, to generate a
somewhat unique identifier. SHA-1 will suffice.
Change-Id: I3cb26bf866d616df3ef32feace10934f19daa1a6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
qmake has the rather bizarre logic that QMAKE_LIBS* is escaped rather
early (instead of right before being written out the the Makefile).
consequently, we need to explicitly escape the paths from the prl files
as well.
Task-number: QTBUG-32326
Change-Id: Ieaf81113d3ca3cf5d8a1ef87c83c5721d6b473ee
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
escape backslashes before the quotes, as otherwise we'd escape the
backslashes we just used to escape the quotes.
Change-Id: I88e12c0c2cfc53e0ab8dce9807b06dfce6aa6e78
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
When defining QMAKE_LFLAGS += /MANIFEST:NO to pro file,
it is not written to vcproj in VS2008.
Added MANIFEST:NO generation to vcproj
Task-number: QTBUG-31975
Change-Id: I5f84b30db711bf9c317ca20dc65b207140edb398
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
makes for less visual noise and a tiny bit more efficient code.
Change-Id: I587707fa4e2dc9bead9435bf5caf3a98ab680725
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Add mkspec win32-msvc2013 and make VS 2013 known to configure and
qmake.
Change-Id: I6e63a4d679727a8a3f068f377956185996d72bce
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
If both the rc_file and res_file was added to the project then in MSVC
2012 it would cause an error complaining of a duplicated resource.
Task-number: QTBUG-29826
Change-Id: Ib3401b423208cd8c90895038c9cbadd80c39b542
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The removal of embed_manifest_dll or embed_manifest_exe from CONFIG
now disables the embedding of manifests in VS project files.
Task-number: QTBUG-5301
Change-Id: I031318883edca6f9b63a7981ef6c44e3f123f6fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
For vcproj files we should not automatically add a dependency for extra
compilers as this should be done via the depends variable for the extra
compiler instead.
This fixes a problem where something like '@echo command' was used in the
command as it would depend on echo and not the actual command anyway.
Change-Id: I7c0aa0d62143aa39c518e8bce65f302afdba33c9
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The PlatformToolSet tag belongs into the PropertyGroup with the label
"Configuration". The former location in an anonymous PropertyGroup
tricked Visual Studio into displaying the right PlatformToolSet but
using its default value. If VS 2010 and VS 2012 are freshly installed
on the same machine, the default toolset for VS 2012 is VS 2010.
Task-number: QTBUG-30822
Change-Id: If00a532e92b0812c552b1cac52ff77a1e7039146
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
/RTCsu and /RTCus must be handled as full runtime check options.
Task-number: QTBUG-30711
Change-Id: I783bf49f2ab1d4fd9636dca8e434bccb54844c8c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The vcxproj format supports the /we compiler switch as
TreatSpecificWarningsAsErrors tag.
Support for this switch got lost during refactoring of the
vc(x)proj generators for Qt 4.8.0.
Task-number: QTBUG-29098
Change-Id: I607e907dcb9c1bc7d261053b6d757941ec7db822
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Fix passing of preprocessor definitions with double quotes to the
resource compiler and to MIDL. Both have a different escaping mechanism
then the C/C++ compiler tool. This fixes a regression introduced in
9e9911715c.
Task-number: QTBUG-30859
Change-Id: Ifa041df407030320847373a5964a547c39dd5439
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Both the /NXCOMPAT and /DYNAMICBASE options were handled by qmake but
never written to the vcxproj file even if they were set in the pro file.
Change-Id: I4ca26fb312648944c25d3a24cdc8c640c9de619d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
In ebc4fb45 all NDEBUG defines were removed from DEFINES to adjust the
nmake generator's behavior to the vcproj generator.
Turns out that the vcproj generator did it wrong.
The user must be able to specify NDEBUG in DEFINES.
Change-Id: Iaaf3915ac79acbbd1e7a3172ad3951d0d686041b
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The undocumented feature of linking the library with the highest
version number is more confusing than helpful.
We're changing the default from on to off now.
Users who still need this feature can turn it on with:
CONFIG += link_highest_lib_version
Task-number: QTBUG-15596
Change-Id: Ic998c1685003caa6f57e27dccf83c8b4a2a09553
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This makes it possible to properly parametrize alternative compilers.
Change-Id: Iaf0961c47875ee16d815356f36acf5652577cdca
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
unlike before, the output dir is now important already during the project
evaluation phase, as finding .qmake.conf depends on it if .qmake.cache is
also present.
ChangeLog: fixed qmake -tp vc (and configure without -no-vcproj)
Change-Id: Ifdb95f3b38a70c0d08e71238059292e761dcfa53
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
